Indian Institute Of Science -IISc has published Supply And Installation Of Lab Infrastructure , Namely Laboratory Tables , Chemical Storage Cabinets , Fume Hoods , Exhaust System Consisting Of Blowers And Scrubbers , Electrical And Gas Piping Services And Other Allied Services In Chemical Sciences. Submission Date for this Tender is 29-01-2020. Laboratory Furniture Tenders in New Chemical Sciences Building, I.I.Sc., Bangalore Karnataka. Bidders can get complete Tender details and download the document.
| Name of Work: SUPPLY AND INSTALLATION OF LABORATORY FURNITURE, FUME HOOD, SERVICES , EXHAUST SYSTEM in Chemical Sciences Building, IISc, Bangalore. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | MODULAR LAB FURNITURE WITH PLINTH MOUNTED CABINETS: Providing, design ,supply, Installation and commissioning of best quality factory made ready Free Standing PLINTH Mounted Cabinets modular steel laboratory furniture with working height 750 mm to 900mm high as per architectural drawings, all surfaces zinc phosphated/degreased and epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating to pass the required ASTM/ IS Codes, complete as per technical specifications given in the tender document. Rate shall be inclusive of cost of all materials and operations described in the item, drilling holes, necessary welding, required nuts and bolts for joining with the supporting members, rivets, pins, Radium Sticker for lab furnitures & Fume Hoods indicating provisions including all part items complete as per approved shop drawings and directions of Engineer in charge. Laboratory furniture in general shall consists of Plinth mounted base cabinet, sink units, Laboratory bench designed for carrying a loading of 400 Kg/sqm, regent shelves, wall rails, storage cabinents etc. consisting of the following: | |||
| 2 | 1.01 | Design, Providing, supply, Installation, testing and commissioning of Vertical/uprights supports for adjustable regent shelves, wall rails or supports for adjustable tables/shelves, supporting frame manufacturered from prime quality CRCA / GI sheet 2 mm thick high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating with height adjustment arrangement for every 25 mm height Free Standing Plinth mounted with nuts and bolts or wall mounted with dash through fasteners of required size complete as per direction of Engineer in charge. Rate is inclusive of cost of all the materials. | item1 | 1577 | Rmt |
| 3 | 2 | BACK / END / SIDE / MODESTY PANELS :\nDesign, Providing, supply, Installation, testing and commissioning back/end/side panels, made of 1.0mm thick CRCA / GI sheet, high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating. All the electrical fittings, wires coming from mains to switches on service panels should be completely enclosed and all entry points of electrical/data/voice services wires/cables should pass through gland protected openings to avoid any accidental situations. All the accessories should have a very high temperature withstanding capacity and electrical insulation properties. Rate is inclusive of cost of all materials and operations described below and in general specifications. length and breadth of panel (out to out) shall be measured for working out the area in square meters for payment. | item2 | 736 | Sqm |
| 4 | 3 | 16 MM PHENOLIC RESIN WORK TOP : \nDesign, Providing and supply of 16 mm thck Solid Grade laminate made of Composite wooden fibers with Electron Beam Cured surface which is free of melamine resins and resistance to Bacteria and various chemical/Biological spillage as well as fumes. SEFA 3.0 Certified from authorized SEFA approved agency with 10 years written Product Guarantee for all properties mentioned in material property data sheet inculding chemical resistance. 10 years of proven testimonials in Global and Indian reputed Government & Private Research Laboratories. The bottom of the worktop should have a V-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. The overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. The rate is inclusive of cost of all materials. Length and breadth (out to out) of the finished top shall be measured in square metres for working out the area for payment. | item3 | 1303 | Sqm |
| 5 | 4 | 16 MM PHENOLIC RESIN SKIRTING : \nDesign, Providing, supply, Installation, testing and commissioning of 100mm high 16mm Chemical Resistant Phenolic resin backspalsh, Trespa Toplab plus or equivalent, made of Composite wooden fibers with Electron Beam Cured surface which is free of melamine resins and resistance to Bacteria and various chemical/Biological spillage as well as fumes. SEFA 3.0 Certified from authorized SEFA approved agency with 10 years written Product Guarantee for all properties mentioned in material property data sheet including chemical resistance. 10 years of proven testimonials in Global and Indian reputed Government & Private Research Laboratories. The rate is inclusive of cost of all materials.. Exposed edges shall be finished with edge banding as per direction of Engineer in charge. Finished work shall be measured in running metres of payment. | item4 | 40 | Rmt |
| 6 | 5 | UNDERBENCH BASE UNITS: Design,Providing, supply, Installation, testing and commissioning of CRCA / GI sheet cabinets (high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating) cabinet bodies with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: b)Case and drawer suspension channels, 2mm thk.c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk.e) Shelves load bearing capacity should be min 40 kg/sqm & each base unit shall be provided with 1no of adjustable shelves. f) Support frame require for positioning worktop on base cabinets costing shall be included.\nCabinets 750mm, 900mm length, shall be provided with 2 shutters with 1 drawer, 600mm length shall be provided with 1 shutter 1 drawer.Rate is inclusive of cost of all materials and operations described above and in general specifications. Mode of measurement shall be in numbers / Each as described below. | |||
| 7 | 5.01 | BASE UNIT 2 DOOR - 900 mm (H) x 560 mm (D) x 900 mm (L) with lock & keys | Items5 | 54 | Each |
| 8 | 5.02 | BASE UNIT 2 DOOR - 900 mm (H) x 560 mm (D) x 1500 mm (L) (Island table) with lock & keys | Items6 | 50 | Each |
| 9 | 5.03 | ISLAND BENCHES : BASE UNIT 900 mm (L)x560 mm (D)x900 mm (H) with lock & keys | Items7 | 704 | Each |
| 10 | 5.04 | ISLAND BENCHES : BASE UNIT 750 mm (L)x560 mm (D)x900 mm (H) with lock & keys | Items8 | 11 | Each |
| 11 | 5.05 | ISLAND BENCHES : BASE UNIT 600 mm (L)x560 mm (D)x900 mm (H) with lock & keys | Items9 | 203 | Each |
| 12 | 5.06 | WALL BENCHES : BASE UNIT 900 mm (L)x560 mm (D)x750 mm (H) with lock & keys | Items10 | 297 | Each |
| 13 | 5.07 | WALL BENCHES : BASE UNIT 750 mm (L)x560 mm (D)x750 mm (H) with lock & keys | Items11 | 122 | Each |
| 14 | 5.08 | WALL BENCHES : BASE UNIT 600 mm (L)x560 mm (D)x750 mm (H) with lock & keys | Items12 | 200 | Each |
| 15 | 5.09 | WALL BENCHES: BASE UNIT 450 mm (L)x450 mm (D)x750 mm (H) Corner worktop support with lock & keys | Items13 | 30 | Each |
| 16 | 5.1 | WALL BENCHES : BASE UNIT 750 mm (L)x560 mm (D)x750 mm (H) Knee space | Items14 | 122 | Each |
| 17 | 5.11 | WALL BENCHES : BASE UNIT 900 mm (L)x560 mm (D)x750 mm (H) Knee space | Items15 | 203 | Each |
| 18 | 6 | TALL REAGENT STORAGE : \nDesign, Providing, supply, Installation, testing and commissioning of tall reagent storage cases with glassed(6mm thk toughened glass fixed with pvc gasket) swing door made of 1.2mm thick CRCA / GI sheet high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating of approved colour, having double wall construction for side walls, smooth exterior and interior surfaces, cabinet sides with spar edges in the front to accommodate door hinges, sides to have holes to accommodate shelving supports or side, back wrap around body with corner posts with holes to support shelf supports. A steel plinth should be integrated into the carcass with four screw feet for height adjustments (-5/+15 mm). Plinth height 900 mm. Shelving: Adjustable Shelves shall be constructed from CRCA / GI powder coated with minimum 60 to 80 microns high chemical resistant epoxy powder /80 to 100 microns Polyurethane powder coating,steel panels (1.0 mm thickness) with all around 27mm strengthening edge; load capacity of 90 kg., height should be adjustable to optimise storage inside the cabinet. Doors should be constructed with double skin construction with sound damping technology, 270° openable 3 axis adjustable hinge or SS304 knuckle hinges with separate door catches for both doors with integrated SS D handle- 160mm high, diameter 10mm. Reagent cabinet should be provided with 75mm dia, vent at the top to connect exhaust duct. Rate is inclusive of cost of all materials and operations described above and in general specifications. Mode of measurement shall be in each as described below.\n | |||
| 19 | 6.01 | Size- 900mm(W) x 560 mm (D) x 2150 mm (H) with 5 adjustable shelves | Items16 | 1 | Each |
| 20 | 6.02 | Size- 600mm(W) x 560 mm (D) x 215mm0(H) with 5 adjustable shelves | Items17 | 1 | Each |
| 21 | 7 | ABOVE BENCH- 2 STAGE REAGENT SHELVES WITH PHENOLIC RESIN :\nDesign, Providing, supply, Installation, testing and commissioning of adjustable overhead shelves made of 13mm phenolic resin(as per work top specification, Trespa Top lab plus or equivalent), complete modular design consisting of 2 stage horizontal storage shelves, 500mm width. The ends and intermediate vertical supports should be 1.2mm thck of CRCA / GI steel high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating with suitable brackets. Horizontal shelves -Each shelf should have a load carrying capacity of 50 kgs. of UDL for the length of 1000 mm. Exposed edges of board shall be provided with edge banding tape of approved size and shade. Supporting metal uprights and supporting brackets if any of regent shelves shall be paid for seperately vertical upright. Regent shelf length and breadth (actual plan area of each shelf) shall be measured for working out the area for payment.\n13 mm thick PHENOLIC RESIN REAGENT SHELF 400mm to 500 mm (D) with suitable edge bannding and fixing arrangements. | Items18 | 362.7 | Sqm |
| 22 | 8 | PP SINK : \nDesign, Providing, supply, Installation, testing and commissioning of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Size- 750w x 450d x 350h. Sink shall be provided with the following accessories- Three way wall/ deck mounted brass water tap with swivelling gooseneck spout with epoxy powder coating with metal handle, Broen, Watersaver, Brownall , as per detailed drawing and specification, anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of PEG BOARD made up of 1mm thick SS 304 , 750mm x 750mm with 33 nos. of projected polypropylene PEGS adjustable with minimum spacing of 100mm between pegs suitable to hold different sizes of glassware. A drip channel of SS304 - 30 x 30 for full width of pegboard with drain tube shall be provided at the bottom for draining out water. Pegboards shall be fixed on wall or furniture at accessible height. Mode of measurement for sink with all accessories shall be in each. | Items19 | 104 | Each |
| 23 | 9 | TWIN CUP EYE WASH (FOR ALL SINKS) : \nDesign, Providing, supply, Installation, testing and commissioning of eye shower according to EN 15154-2:2006 and ANSI Z358.1-2004 with two angled heads, hand held, with built in check valve & flow fix to ensure the correct water flow of max 14 litres/minute from high performance spray heads with rubber shower head for easily removal of lime. The weight of the hand held eye washer must not exceed 0.5kg for easy handling. Eye shower to include sign package consisting of wall mounted triangle plate & service plate. Rate is inclusive of cost of all materials and operations described above and conforming to drawing and general specifications. Mode of measurement shall be in each as described below. Make :- Broen / Water saver /Brownall. | Items20 | 104 | Each |
| 24 | 10 | ANTI SPLASH GUARD AT SINK AREA :\nDesign, Providing supply, Installation, testing and commissioning of 16mm thk.Phenolic Resin (as per work top specification) Anti Splash Guard for Sink area. Rate is inclusive of cost of all materials described above and in general specifications. Mode of measurement shall be in each. | |||
| 25 | 10.01 | 400mm (H) x 750mm (L) | Items21 | 206 | Each |
| 26 | 10.02 | 400mm (H) x 1500mm (L) | Items22 | 50 | Each |
| 27 | 10.03 | 400mm (H) x 900mm (L) | Items23 | 53 | Each |
| 28 | 11 | SPOT EXTRACTOR : \nDesign, Providing, supply, Installation, testing and commissioning of spot extractors made of Poly Propylene with articulating joints having large frictional diameter and supported with ball bearings. All metal parts that come in contact with airstreams shall be made from acid resistant stainless steel ( SS 316). Extraction arms shall be F75mm with 360° rotation, which shall be mounted with a m.s. ceiling bracket, chemical resistance epoxy powder coated. Arms are provided with dampers, tight down to under pressure of 3500pa & air temperature of -10° to 70°C, as per drawing and detailed specification. Mode of measurement shall be in each. | Items24 | 54 | Each |
| 29 | 12 | CONSTANT AIR VOLUME :\nDesign, Providing, supply, Installation, testing and commissioning of Air flow controllers for constant air volume which shall be of Plastic material (Polystyrene) classified M1 & galvanized steel for sleeves. Operating temperature shall be 5 to 60 deg C. \nThe air is forced to pass through predetermined space in which a flap can change the position according to the specified air flow. The requested airflow is fixed by a\nscrewdriver. CAV is fixed in a Vertical / Horizontal ducts using a lip seal which ensure tightness. Any accessories required for fixing the CAV shall be included . Mode of measurement shall be in each. | |||
| 30 | 12.01 | 50 CFM | Items25 | 59 | Each |
| 31 | 12.02 | 100 CFM | Items26 | 54 | Each |
| 32 | 12.03 | 150 CFM | Items27 | 13 | Each |
| 33 | 13 | SERVICE DROPPER AND ENCLOSURE :\nDesign, Providing, supply, Installation, testing and commissioning of Service Dropper & Enclosure made of 1.2mm thickCRCA / GI sheet high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating of approved colour.\nSERVICE DROPPER OF SIZE: As required---(H) X 150 mm (D) X 300mm(W) | Items28 | 648 | Rmt |
| 34 | 14 | FILLER PANEL :\nDesign, Providing, supply, Installation, testing and commissioning of filler panel of 1.2mm thkCRCA / GI sheet high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating, sheet with 27mm strengthening edge, high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating. Filler panels should be provided between wall to cabinet ( front or rear) or between two cabinets as required. Mode of Measurement shall be in sqm. | Items29 | 485 | Sqm |
| 35 | 15 | BASE MOULDING :\nDesign, Providing, supply, Installation, testing and commissioning of Base Moulding of pliable black vinyl, 100mm high of 1.2mm thk fixed with corner clips to conceal levelling device on base cabinets. Mode of measurement shall be in running metres. | Items30 | 2121.84 | Rmt |
| 36 | 16 | OVERHEAD FRAMED GLASS SWING DOOR CABINETS :\nDesign, Providing, supply, Installation, testing and commissioning Overhead framed glass swing door cabinets wall storage units made of CRCA / GI sheet with high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating of approved colour and should be 1.2mm thick, double wall construction for side walls with sound dampening technology or side and back wrap around body with corner posts with holes to support shelf supports, shelves shall be provided, constructed from 1.0mm thick CRCA steel / GI high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating with all around 27mm strengthening edge, load capacity of 90 kg/ shelf , height should be adjustable to optimise the storage space in side the cabinet. Framed glass swing door leaf shall be constructed from 1.2mm thick CRCA/ GI steel panels, bent to 20mm thickness all around, dampened with contact cushions with 6mm thick float glass with polished edges fixed to shutter frame with pvc gasket. A guide runner shall be provided at the bottom with plastic coated ball bearings or the shutter should be top hung, supported on a ball bearing nylon roller running in a track attached to the top of the cabinet with a guide rail at the bottom. All cabinets should have load carrying capacity of 90 kg per cabinet. All cabinets should have a magnetic label to show details about it’s content. All storage cabinets should be provided with interchangable cylinder locks. Rate is inclusive of cost of all materials and operations described above and in general specifications. Mode of measurement shall be in each as described below. | |||
| 37 | 16.01 | Size: 750mm(W) X 400 mm (D) X 900 mm (H) with 2 adjustable shelves | Items31 | 110 | Each |
| 38 | 16.02 | Size:900mm(W) X 400 mm (D) X 900 mm (H) with 2 adjustable shelves | Items32 | 44 | Each |
| 39 | 17 | LATTICE ASSEMBLY :\nDesign, Providing, supply, Installation, testing and commissioning of 12mm Dia Solid Epoxy Rod of corrosion resistant material shall be clamped to form a lattice arrangement to hold the test samples of 50 kg. | Items33 | 241.2 | Sqm |
| 40 | 18 | FM APPROVED STORAGE CABINETS :\nDesign, Providing, supply, Installation, testing and commissioning of FM approved Self Close storages cabinets of 90minutes Fire Rating Solvent FM Approved Self Close storages cabinets of corrosive chemicals and should be provided with a ventilation system to enable exhaust of localized fumes emanating from the chemicals stored. Because of the corrosive environment the material used is 1.2 mm thick CRCA / GI sheet high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating, having scratch hardness of 3kg and passing 1000 hour salt spray test. It is fitted with a float glass to enable visibility inside the cabinet and has a tray placed at the bottom for collecting the spillage. The rate is inclusive of the cost of all the materials and involved as per drawing and detailed specifications.\n900mm(W) x 600 mm (D) x 1900 mm (H) 90 minutes Fire Rated FM approved Solvent Storage Cabinets with 4nos PP Tray Shelf, Tray Shelves with load capacity of 75 kgs & 1nos Bottom PP Collection sump | Items34 | 59 | Nos |
| 41 | 19 | SERVICES FIXTURES :\nDesign, Providing, supply, Installation, testing and commissioning Service fittings shall be laboratory grade, and water faucets and valve bodies shall be cast red brass alloy or bronze forgings, with a minimum content of 85% & with metal handles All laboratory service fixtures shall be furnished with Powder coated finish in White. Coating material shall be electrostatic ally applied to all exposed surfaces. After application, coating shall be fully baked to permit curing. The Finish coating shall have the optimum combination of Chemical Resistance, Mar & Abrasion resistance & Resistance to fading under Ultraviolet (UV) Light. Refer technical specification\nNote: \na) For all Gases Line 6.35mm OD Tube Connector(Double Compression fittings End) along with above valves to be included in the above pricing.\nb) For all Vacuum 12.75 mm OD Tube Connector(Double Compression fittings End) along with above valves to be included in the above pricing.\nc) For Portable Water 15 NB FNPT along with above valves to be included in the above pricing. | |||
| 42 | 19.01 | BENCH FITTING WITH 1 NEEDLE VALVE FOR ARGON | Items35 | 10 | Nos |
| 43 | 19.02 | BENCH FITTING WITH 1 NEEDLE VALVE FOR COMPRESSED AIR | Items36 | 65 | Nos |
| 44 | 19.03 | BENCH FITTING WITH 1 NEEDLE VALVE FOR FUTURE NON-BURNING INERT GAS | Items37 | 4 | Nos |
| 45 | 19.04 | BENCH FITTING WITH1 NEEDLE VALVE FOR NITROGEN | Items38 | 15 | Nos |
| 46 | 19.05 | BENCH FITTING WITH 1 NEEDLE VALVE FOR H2 | Items39 | 2 | Nos |
| 47 | 19.06 | BENCH FITTING WITH 1 NEEDLE VALVE FOR HE | Items40 | 10 | Nos |
| 48 | 19.07 | BENCH FITTING WITH 1 NEEDLE VALVE FOR O2 | Items41 | 2 | Nos |
| 49 | 19.08 | BENCH FITTING WITH 1 NEEDLE VALVE FOR POW | Items42 | 6 | Nos |
| 50 | 20 | ELECTRICAL RACEWAY :\nDesign, Providing, supply, Installation, testing and commissioning of Table mounted metal Race ways of 1.2mm CRCA / GI high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating for power supply distribution including provision to fix power sockets, including supply of centre reducer, left side reducer, right side reducer, 90deg bend, vertical bend, adjustable coupler, earth flat clamp, cable binder, fixing materials, as required. \n150 mm (H) x 100 mm (D) Metal Race way with cable divider for power line & data line seperation | Items43 | 1233.6 | Rmt |
| 51 | 21 | ELECTRICAL POWER SOCKETS & MCBs :\nDesign, Providing, supply, Installation, testing and commissioning of following modular / industrial type Plug sockets. The assembly shall be housed in metal / pvc Raceway. Rate shall include necessary wiring, front face plate for sockets and internal wiring. | |||
| 52 | 21.01 | Modular Single phase 1 No 6/16 Amps multi pin flush type socket outlet controlled by 1 No 16 Amps flush type SP switch with indicator. | Items44 | 10 | Nos |
| 53 | 21.02 | Modular Single phase 2 No 6/16 Amps multi pin flush type socket outlet controlled by 2 Nos 16 Amps flush type SP switch with indicator. | Items45 | 1687 | Nos |
| 54 | 21.03 | Modular Single phase 3 No 6/16 Amps multi pin flush type socket outlet controlled by 3 Nos 16 Amps flush type SP switch with indicator. | Items46 | 10 | Nos |
| 55 | 23 | FUME HOOD : \nDesign, Providing, supply, Installation, testing and commissioning of Bench Top Constant Air Volume type Fume Hood and accessories complete as per enclosed drawings and as per approved final sample. (For more details on type of Fume Hood construction, Fume Hood sash, Baffles, Damper, Duct collar, face velocity monitor system, service port, Fume Hood work top, necessary certifications, other relavent details & drawings, Height of Fume Hood shall be as per Manufacturing standards. Note: All the Fume Hood accesseability shall be from Front side kindly refer tender technical specification sheet). | |||
| 56 | 23.01 | FUME HOOD SIZE : 1200mm (W) x 1000mm (D) | Items47 | 2 | Nos |
| 57 | 23.02 | FUME HOOD SIZE : 1500mm (W) x 1000mm (D) | Items48 | 15 | Nos |
| 58 | 23.03 | FUME HOOD SIZE : 2100mm (W) x 1000mm (D) (Solvent distillation ) | Items49 | 20 | Nos |
| 59 | 23.04 | FUME HOOD SIZE : 2100mm (W) x 1000mm (D) | Items50 | 4 | Nos |
| 60 | 23.05 | FUME HOOD SIZE : 1800mm(W) x 1000 mm (D) | Items51 | 150 | Nos |
| 61 | 23.06 | FUME HOOD SIZE : 1800mm(W) x 1000 mm (D) (With PP Sink (Sink Size 450mm(w) x 300mm(d) x 200mm (h) ) | Items52 | 6 | Nos |
| 62 | 24 | DUCTLESS FUME HOOD : \nDesign, Providing, supply, Installation, testing and commissioning of Ductless Green Fume Hoods with Pre Filter, Carbon Filter Modular Filtration columns Bench Top Fume Hood, Auto Sash with sensors, Anti-corrosion metallic alloy protected by a thermo-hardened\nanti-acid polymer coating, High thickness 25mm. Non-conductive material, very high mechanical and chemical resistance, Halo Sense 1nos Halo Sense Smart – version VOC & Work Top shall 20 mm Phenolic Resin, Fume Hood Stand for positioning of Ductless Fume Hood. Note: All the Fume Hood accesseability shall be from Front side kindly refer tender technical specification sheet for detailed description of Ductless Fume Hood. According to the detailed technical specification costing should be considered. | |||
| 63 | 24.01 | FUME HOOD SIZE : 1200mm (W) x 1000mm (D) | Items53 | 1 | Nos |
| 64 | 25 | FUME HOOD BASE UNITS:\nDesign, Providing, supply, Installation, testing and commissioning of FM approved self closing Acid & Alkali storage cabinets with pull out PP shelves, and with Vent Holes connected to exhaust louvers for fresh air- Rate is inclusive of cost of all materials. Mode of measurement shall be in numbers. Support frame required for fixing worktop on base cabinets, costing for which shall be included. | |||
| 65 | 25.01 | 600 mm (w) x 550 mm (D) x 600 mm (H) with Single Door. | Items54 | 76 | Nos |
| 66 | 25.02 | 1100 mm (w) x 550 mm (D) x 600 mm (H) with Double Door. | Items55 | 58 | Nos |
| 67 | 26 | FUME HOOD BASE CABINET :\nDesign, Providing, supply, Installation, testing and commissioning of base units CRCA / GI sheet cabinets (high chemical resistance epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating) cabinet bodies with flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. a)Steel used in construction of cases shall be 1.2mm thk except as follows: \nb)Case and drawer suspension channels, 2mm thk.\nc)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. \nd) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk.\ne) Shelves load bearing capacity should be min 40 kg/sqm & each base unit shall be provided with 1no of adjustable shelves\nf) Support frame require for positioning worktop on base cabinets costing shall be included.\nCabinets 750mm, 900mm length, shall be provided with 2 shutters with 1 drawer, 600mm length shall be provided with 1 shutter 1 drawer. Rate is inclusive of cost of all materials and operations described above and in general specifications. Mode of measurement shall be in numbers as described below. | |||
| 68 | 26.01 | 600 mm (W)x560 mm (D)x900 mm (H) \nfor storaging vacuum pump (Include Power supply for vacuum pump within the Fume Hood circuit, Drain from Vacuum to be connected to Fume Hood drain connection, Hot Air generated from Vacuum pump to be exhausted through fume hood exhaust connections | Items56 | 2 | Nos |
| 69 | 26.02 | 900 mm (w)x560 mm (D)x900 mm (H) \nfor storaging vacuum pump (Include Power supply for vacuum pump within the Fume Hood circuit, Drain from Vacuum to be connected to Fume Hood drain connection, Hot Air generated from Vacuum pump to be exhausted through fume hood exhaust connections | Items57 | 43 | Nos |
| 70 | 26.03 | 600 mm (w)x560 mm (D)x900 mm (H) | Items58 | 6 | Nos |
| 71 | 26.04 | 900 mm (w)x560 mm (D)x900 mm (H) | Items59 | 224 | Nos |
| 72 | 26.05 | 600 mm (w) x 550 mm (D)x450 mm (H) with Double Door for Solvent Distillation Fume Hoods for 7 feet FH | Items60 | 38 | Nos |
| 73 | 26.06 | 900 mm (w) x 550 mm (D) x 450 mm (H) with Double Door for Solvent Distillation Fume Hoods for 7 feet FH | Items61 | 19 | Nos |
| 74 | 27 | FUMEHOOD CONTROL VALVE :\nDesign, Providing, supply, Installation, testing and commissioning of gas and utility control valves, located in the end panels, controlled by extension rods / flexible tubes as per media specification and colour coated metal handles. Mode of measurement shall be in numbers as described below.\nNote: \na) For all Gases including Compressed Air, N2 6.35mm OD Tube Connector(Double Compression fittings End) along with valves to be included in the pricing.\nb) For Portable Water 15 NB FNPT along with valves to be included in the pricing. | |||
| 75 | 27.01 | FH Front Control Valve for N2 | Items62 | 406 | Nos |
| 76 | 27.02 | FH Front Control Valve for CA | Items63 | 406 | Nos |
| 77 | 27.03 | FH Front Control Valve for Portable water | Items64 | 406 | Nos |
| 78 | 27.04 | FH Flow Fix Control Valve for Cooling Water feed | Items65 | 197 | Nos |
| 79 | 27.05 | FH Front Outlet for Condensate Water Drain Valve | Items66 | 197 | Nos |
| 80 | 27.06 | FH Front Control Valve for H2 | Items67 | 27 | Nos |
| 81 | 27.07 | FH Front Control Valve for Ar | Items68 | 8 | Nos |
| 82 | 27.08 | FH Front Control Valve for O2 | Items69 | 8 | Nos |
| 83 | 27.09 | FH Front Control Valve for Methane | Items70 | 4 | Nos |
| 84 | 27.1 | FH Front Control Valve for CO2 | Items71 | 4 | Nos |
| 85 | 27.11 | FH Front Control Valve for ACTELYENE | Items72 | 4 | Nos |
| 86 | 28 | FUMEHOOD INTERNAL PIPING & DRAIN :\nDesign, Providing, supply, Installation, testing and commissioning of internal all Utility services piping in fume hoods, consisting SS 304 hard / flexible tubes as per media specification of required dia and length, all pipes extended up to 150mm above the Fume hood top including making connections with control valves etc complete internal piping work. Control valve shall be paid separately. Fume Hood along with Cup Sink HDPE & Condensate drain pipe shall be connected to nearest floor trap. Rate is inclusive of cost of all materials. refer technical specification Mode of measurement shall be per each fume hood.\nNote: 110 & 75mm OD HDPE Popup is provided behind the sinks & Fume Hoods by Piping Vendor. Fume Hood Vendor shall connect & seal the drain piping to nearest points ( approximately 3 rmtrs) . Based on the Site Condition may vary the outlet drain points. | Items73 | 197 | Nos |
| 87 | 29 | FUMEHOOD INTERNAL ELECTRICAL SYSTEM :\nDesign, Providing, supply, Installation, testing and commissioning of fume hood internal electrical supply system, consisting of - 6/16A sockets 4+4 nos, with 16A Tiny Trip MCB; DB on Top or at suitable location of the fume hood with MCB's for each circuit along with 20A DP RCCB isolator; FRLS wiring with 4 sqmm wires for power sockets; with Two rapid start, approved LED light fixtures on Fume Hood internal ceiling. Light switches on Fume hood Fasica, 32 amp 4 pole MCB for main incomer, wiring should be done by using proper raceway/conduit. Socket should be provided with proper earthing with 4 sqmm FRLS wire. Rate is inclusive of cost of all materials, mode of measurement shall be each fume hood. ( Note the control box of fume hood should be placed in the front panel of fume hood for easy maintenance. Proto type sample to be got approved from the University before mass production.) | Items74 | 197 | Nos |
| 88 | 30 | FUMEHOOD CEILING ENCLOSURES :\nDesign, Providing and supply, Installation, testing commissioning of vertical side panels, made of 1.2mm thick CRCA / GI sheet, epoxy powder coated to 60 to 80 microns thickness / 80 to 100 microns Polyurethane powder coating -Ceiling Enclosures to fill the space between the top of the hood and the ceiling to get a finished appearance. False ceiling height to be considered up to 3.0 Meter Height from FFL. The Ceiling Panel to be provided with an Access Panel in the front for easy access to the light fixture, Electrical Junction Box, CAV Dampers etc. Rate to include cost of all materials and operations. Mode of measurement shall be perimeter outer boxing panel and height of panel shall be measured for working out the area in Sqm for payment. | Items75 | 1900 | Sqm |
| 89 | 31 | ELECTRICAL- LAB WORKS: RELEVANT SCHEDULE OF RATES FOR ELECTRICAL WORKS AS PER THE PUBLIC WORKS, PORTS AND INLAND WATER TRANSPORT DEPARTMENT KARNATAKA STATE GOVERNMENT HAS TO BE REFERED WHEREVER APPLICABLE FOR THE DESCRIPTION (KSR CODE)\nPVC CONDUIT & ACCESSORIES - OPEN CONDUIT SYSTEM:\nSupplying and laying of heavy gauge PVC conduit pipe following dia and thickness confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc. and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/stone structure or rawl plugs in case of brick walls and cement plastering the damage portion using heavy gauge saddles at an interval of 700 mm using NF screws. Quantity has to be supplied as per the approved shop drawings.\n32 mm dia 2.5 mm thick (KSR CODE-1.1.3) | Items76 | 400 | Rmt |
| 90 | 32 | WIRES & CABLES:\nSupply & Wiring for lighting/power circuits using following sizes of FRLS PVC insulated 1100V grade, Multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS – 694 : 1990 & confirming to GTP of Group – A. Quantity has to be supplied as per the approved shop drawings and circuit wiring quantity. | |||
| 91 | 32.01 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire (KSR CODE-2.5.4) | Items77 | 20000 | Rmt |
| 92 | 32.02 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire (KSR CODE-2.5.5) | Items78 | 3500 | Rmt |
| 93 | 33 | SWITCHES, SOCKETS & ACCESSORIES:\nSupplying and fixing 32 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 32 A, “C” curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, internal wiring, testing and commissioning etc., as required. Quantity has to be supplied as per the approved shop drawings (KSR CODE-3.14) | Items79 | 120 | Each |
| 94 | 34 | Supplying and fixing of modular switch / sockets /stepped electronic fan regulator / dimmer /telephone socket etc. Quantity has to be supplied as per the approved shop drawings and rate shall be include all internal wiring, loop to loop wiring using copper wire on existing modular switch plate as per IS 3854 & IS 1293\nGROUP B | |||
| 95 | 34.01 | 16 A oneway switch (KSR CODE-3.7.19) | Items80 | 250 | Each |
| 96 | 34.02 | 6/16 A universal socket (KSR CODE-3.7.22) | Items81 | 250 | Each |
| 97 | 35 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. | Items82 | 200 | Each |
| 98 | 36 | Supplying and flush mounting of following sized powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / C.C wall | |||
| 99 | 36.01 | 1-3 Way (KSR CODE-3.5.1) | Items83 | 10 | Each |
| 100 | 36.02 | 6 Way (KSR CODE-3.5.3) | Items84 | 125 | Each |
| 101 | 37 | Supply and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required numbers of machine screws, bolts, nuts etc., complete on the existing metal / PVC box, for followings | |||
| 102 | 37.01 | 1 to 3 Module (KSR CODE-3.6.1) | Items85 | 10 | Each |
| 103 | 37.02 | 6 Module (KSR CODE-3.6.3) | Items86 | 125 | Each |
| 104 | 38 | CONTROL SWITCHGEARS AND ACCESSORIES:\nSupply and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C type curve, indicator ON/OFF, energy cross -3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. with connections, testing and commissioning etc., as required, for the followings | |||
| 105 | 38.01 | 5-32 Amps Single pole (KSR CODE-6.16.1) | Items87 | 400 | Each |
| 106 | 38.02 | 5-32 Amps Double pole (KSR CODE-6.16.3) | Items88 | 25 | Each |
| 107 | 38.03 | 5-32 Amps Triple pole (KSR CODE-6.16.5) | Items89 | 60 | Each |
| 108 | 39 | Supply and fixing regular MCB distribution boards on wall(concealed) / wood board / flush mounting using required clamps, bolts, nuts and wall chipping, drilling and plastering etc., with provision for fixing suitable type capacity MCBs single phase/ three phase/single door with powder coated painting, made out of 14 SWG MS enclosure with with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, for the followings | |||
| 109 | 39.01 | 12 way SP & N, Double door (KSR CODE-6.17.6) | Items90 | 18 | Each |
| 110 | 39.02 | 4 way TP & N, Double door (KSR CODE-6.17.7) | Items91 | 27 | Each |
| 111 | 40 | RACEWAYS:\nSupply, unloading , shifting & installation in horizontal & vertical formation of raceway of following widths and delivered in standard lengths along with Coupler plates. All the necessary bends (horizontal/ vertical), tees, cross, elbows, reducers, etc, as shown in the drawing and as per the site condition/ requirement are to be fabricated out of standard length of trays and as per standard & good engineering practice. The running rate shall include bends , T section and couplers. Raceway supports shall be paid extra under the head of Structural steel. All the necessary modifications, addition, removal of supports, brackets, cleats, etc., minor civil works for grouting and entries are to be carried out as and where required as a part of this item work but the measurement and payment will be made against similar item appearing elsewhere in this BOQ. Installation of Factory fabricated GI powder coated type raceway made out of 14 swg sheet steel and supporting angle frame at every 1.2 mtr, bottom angles, anchor fasteners, bolts and nuts etc. The tray shall be suspended from ceiling using anchor bolt and angle iron supports or threaded rods. The rate shall include for all accessories like bends, elbows, tees, coupler plates, joints and fixing accessories etc., which will be measured as linear measurement. Quantity to be supplied as per the approved shop drawings. | |||
| 112 | 40.01 | 150(H)x50(D) UPVC raceway with separation partition for power & lan cables, cover, body, finishing accessories such as end cap, flat angle, junctions, joints, etc. | Items92 | 250 | Rmt |
| 113 | 40.02 | 105(H)x50(D) UPVC raceway with separation partition for power & lan cables, cover, body, finishing accessories such as end cap, flat angle, junctions, joints, etc., Rate shall be included for drilling, finishing works and fixing accessories. | Items93 | 100 | Rmt |
| 114 | 40.03 | 105(H)x50(D) size powder coated GI raceway with cover and separation partition for power & lan cables, including its accessories like Tees, Lbows. Rate shall be included for drilling, finishing works and fixing accessories. | Items94 | 100 | Rmt |
| 115 | 40.04 | 150(H)x50(D) size powder coated GI raceway with cover and separation partition for power & lan cables, including its accessories like Tees, Lbows. Rate shall be included for drilling, finishing works and fixing accessories. | Items95 | 350 | Rmt |
| 116 | 41 | EARTHING:\nSupplying and running of 8 swg dia G.I. wire for grounding and (along with other wires in conduit system of wiring) using necessory suitable size clamps, nails, guttas/spacers etc., for loop earthing as required. (KSR CODE-7.22.3) | Items96 | 110 | Rmt |
| 117 | 42 | Supplying & running of GI/Copper strips for grounding connections using necessary fixing material and strip at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc., as required.\n25 mm X 6 mm G.I. strip. (KSR CODE-7.3.2) | Items97 | 300 | Rmt |
| 118 | 43 | LT UG CABLES - CABLE LAYING:\nLabour charges for laying of 1.1kV class U G cable (XLPE armoured) in existing trench GI pipe/Stoneware pipe / on wall / on poles / cable tray as required. Quantity has to be supplied as per the approved shop drawings \n6 sqmm to 16 sqmm (KSR CODE-7.8.6) | Items98 | 1130 | Rmt |
| 119 | 44 | Supply and fixing of heavy duty double compression, weather proof cable glands of brass metal suitable for UG cable(XLPE armoured) of 1.1 kV class with brass washer, rubber ring complete erected with cable and lead connection, PVC insulating tape, identification ferrules at each core end and other consumables, etc., for the followings | |||
| 120 | 44.01 | 19/20 mm (KSR CODE-7.14.1) | Items99 | 190 | Each |
| 121 | 44.02 | 25 mm dia (KSR CODE-7.14.2) | Items100 | 80 | Each |
| 122 | 45 | Supplying tinned copper lugs and crimping and wiring to terminal point for wire and terminals to be coverd using PVC insulating tape, identification ferrules at each core end and other consumables, for the following sizes | |||
| 123 | 45.01 | 1.5 sqmm (KSR CODE-7.21.1) | Items101 | 850 | Each |
| 124 | 45.02 | 3 C 6 sqmm (KSR CODE-7.21.4) | Items102 | 160 | Each |
| 125 | 45.03 | 10 sqmm (KSR CODE-7.21.8) | Items103 | 275 | Each |
| 126 | 46 | LT UG CABLES - CABLE SUPPLY:\nSupply,testing and commissioning of 1100V grade, following XLPE insulated armoured / unarmoured Aluminium / Copper conductor cable as per specifications and quantity has to be supplied as per the approved shop drawings and cable schedule. The cable shall be laid in existing trenches / cable trays as required. The cable shall be clamped at regular intervals to the supports in trench or on cable trays or brick wall using MS clamps, cable ties and fasteners, upto 6 sqmm cable shall be round strips and 10 sqmm and above cables shall be flat strips to be considered, for the followings sized cables | |||
| 127 | 46.01 | 3 C 6 sqmm LT XLPE insulated copper conductor pvc outer sheathed Armoured cable | Items104 | 1000 | Rmt |
| 128 | 46.02 | 4 C 10 sqmm LT XLPE insulated copper conductor pvc outer sheathed Armoured cable | Items105 | 150 | Rmt |
| 129 | 47 | MISCELLANEOUS (CIVIL WORKS):\nProviding and doing with civil wall cutout, wall chipping, drilling, external wall plaster in single layers , with C.M 1:4, with approved water proofing compound with sponge finish including the cost all leads, lifts, scaffolding, staging hacking the concrete surface , curing etc., complete. Note: considered for the reworking finished civil walls. | Items106 | 30 | Sqm |
| 130 | 48 | Removing & Refixing of raceways and wiring, with necessary dressing. | Items107 | 200 | Rmt |
| 131 | 49 | Relocation of Existing Electrical Distribution Boards. Rate shall be include removable and refixing of Distribution Boards with necessary circuit wirings and also civil works like chipping, plastering and final finishing. | Items108 | 20 | Nos |
| 132 | 50 | TERRACE FLOOR EXHAUST BLOWER WORKS- EARTHING:\nSupplying, fixing, wiring, Earth electrode for grounding using 40mm dia thick 2.5 mtr long GI pipe and GI plate of 600x600x3mm with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400mmx400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. (KSR CODE-7.2) | Items109 | 12 | Set |
| 133 | 51 | Supplying & running of following GI/Copper strips for grounding connections using necessary fixing material and strip at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc., as required, for the following sizes | |||
| 134 | 51.01 | 25 mm X 6 mm G.I. strip. (KSR CODE-7.3.2) | Items110 | 3000 | Rmt |
| 135 | 51.02 | 50 mm X 6 mm G.I. strip (KSR CODE-7.3.4) | Items111 | 1000 | Rmt |
| 136 | 52 | CABLE SUPPLY:\nSupply,testing and commissioning of 1100V grade,following XLPE insulated armoured / unarmoured Aluminium / Copper conductor cable as per specifications and quantity has to be supplied as per the approved shop drawings and cable schedule. The cable shall be laid in existing trenches / cable trays as required. The cable shall be clamped at regular intervals to the supports in trench or on cable trays or brick wall using MS clamps, cable ties and fasteners. upto 6 sqmm cable shall be round strips and 10 sqmm and above cables shall be flat strips to be considered, for the followings sized cables | |||
| 137 | 52.01 | 3 C 1.5 sqmm LT XLPE insulated copper conductor pvc outer sheathed Armoured cable | Items112 | 720 | Rmt |
| 138 | 52.02 | 3 C 2.5 sqmm LT XLPE insulated copper conductor pvc outer sheathed Armoured cable | Items113 | 700 | Rmt |
| 139 | 52.03 | 3 C 6 sqmm LT XLPE insulated copper conductor pvc outer sheathed Armoured cable | Items114 | 900 | Rmt |
| 140 | 52.04 | 4 C 6 sqmm LT XLPE insulated copper conductor pvc outer sheathed Armoured cable | Items115 | 140 | Rmt |
| 141 | 52.05 | 3 C 16 sqmm LT XLPE insulated Aluminium conductor pvc outer sheathed Armoured cable | Items116 | 650 | Rmt |
| 142 | 52.06 | 3.5 C 25 sqmm LT XLPE insulated Aluminium conductor pvc outer sheathed Armoured cable | Items117 | 125 | Rmt |
| 143 | 52.07 | 3.5 C 70 sqmm LT XLPE insulated Aluminium conductor pvc outer sheathed Armoured cable | Items118 | 320 | Rmt |
| 144 | 52.08 | 3.5 C 95 sqmm LT XLPE insulated Aluminium conductor pvc outer sheathed Armoured cable | Items119 | 200 | Rmt |
| 145 | 52.09 | 3.5 C 300 sqmm LT XLPE insulated Aluminium conductor pvc outer sheathed Armoured cable | Items120 | 500 | Rmt |
| 146 | 52.1 | 5 C 1.5 sqmm LT XLPE insulated copper conductor pvc outer sheathed Armoured cable | Items121 | 1800 | Rmt |
| 147 | 53 | LT UG CABLES - CABLE LAYING:\nLabour charges for laying of 1.1kv class U G cable (XLPE armoured) in existing trench GI pipe/Stoneware pipe / on wall / on poles / cable tray as required, for the followings | |||
| 148 | 53.01 | 6 sqmm to 16 sqmm (KSR CODE-7.8.6) | Items122 | 5000 | Rmt |
| 149 | 53.02 | 25 sqmm to 75 sqmm (KSR CODE-7.8.7) | Items123 | 445 | Rmt |
| 150 | 53.03 | 95 sqmm to 150 sqmm (KSR CODE-7.8.8) | Items124 | 200 | Rmt |
| 151 | 53.04 | 300 sqmm to 400 sqmm (KSR CODE-7.8.10) | Items125 | 500 | Rmt |
| 152 | 53.05 | 1.5 sqmm to 4 sqmm | Items126 | 3220 | Rmt |
| 153 | 54 | Supply and fixing of heavy duty double compression, weather proof cable glands of brass metal suitable for UG cable(XLPE armoured) of 1.1kv class.with brass washer, rubber ring complete erected with cable and lead connection, PVC insulating tape, identification ferrules at each core end and other consumables, etc., for the followings | |||
| 154 | 54.01 | 19/20 mm dia (KSR CODE-7.14.1) | Items127 | 300 | Each |
| 155 | 54.02 | 32 mm dia (KSR CODE-7.14.3) | Items128 | 56 | Each |
| 156 | 54.03 | 50 mm dia (KSR CODE-7.14.5) | Items129 | 20 | Each |
| 157 | 54.04 | 63 mm dia (KSR CODE-7.14.6) | Items130 | 12 | Each |
| 158 | 55 | Supplying tinned copper lugs with Bimetallic paste for Aluminium cable and crimping and wiring to terminal point for wire and terminals to be coverd using PVC insulating tape, identification ferrules at each core end and other consumables, of following sizes | |||
| 159 | 55.01 | 1.5 sqmm (KSR CODE-7.21.1) | Items131 | 720 | Each |
| 160 | 55.02 | 2.5 sqmm (KSR CODE-7.21.2) | Items132 | 132 | Each |
| 161 | 55.03 | 6 sqmm (KSR CODE-7.21.4) | Items133 | 210 | Each |
| 162 | 55.04 | 16 sqmm (KSR CODE-7.21.6) | Items134 | 150 | Each |
| 163 | 55.05 | 25 sqmm Long Barrel (KSR CODE-7.21.7) | Items135 | 40 | Each |
| 164 | 55.06 | 35 sqmm Long Barrel (KSR CODE-7.21.8) | Items136 | 26 | Each |
| 165 | 55.07 | 50 sqmm Long Barrel (KSR CODE-7.21.9) | Items137 | 16 | Each |
| 166 | 55.08 | 70 sqmm Long Barrel (KSR CODE-7.21.10) | Items138 | 30 | Each |
| 167 | 55.09 | 95 sqmm Long Barrel (KSR CODE-7.21.11) | Items139 | 16 | Each |
| 168 | 55.1 | 150 sqmm Long Barrel (KSR CODE-7.21.13) | Items140 | 20 | Each |
| 169 | 55.11 | 300 sqmm Long Barrel (KSR CODE-7.21.16) | Items141 | 30 | Each |
| 170 | 56 | Supplying and running of G.I./copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc., for loop earthing as required, for the followings | |||
| 171 | 56.01 | 8 SWG GI wire (KSR CODE-7.22.3) | Items142 | 250 | Rmt |
| 172 | 56.02 | 8 SWG Copper wire (KSR CODE-7.22.4) | Items143 | 200 | Rmt |
| 173 | 57 | CABLE TRAYS - Hot Dipped Galvanized Iron Cable Tray:\nSupply, unloading , shifting & installation in horizontal & vertical formation of prefabricated perforated type, galvanised sheet steel cable trays & cable tray cover of following sizes and delivered in standard lengths along with Coupler plates and requisite number of hardwires at different levels along open area as per approved shop drawings and quantity has to be supplied as per the approved shop drawings. As per the site condition/ requirement are to be fabricated out of standard length of trays and as per standard & good engineering practice, gas cutting of cable trays at site is not permitted. If any welding is to be done on cable trays applying of two coats of zinc rich primer and one coat of Silver paint at the modified/ repaired area/ portions and erection of the same. The running rate shall include bends , T section and couplers. Cable tray supports shall be paid extra under the head of Structural steel. Installation of Factory fabricated GI Ladder type cable tray made out of 14swg sheet steel, side channel size 75mmx15 mm and rung size 30mmx6mm, spaced at 250mm interval and factory fabricated GI perforated type cable tray made out of 14swg sheet steel,supporting angle frame at every 1.2 mtr, bottom angles, anchor fasteners, bolts and nuts etc.\nOpen area cable tray shall be hot dipped galvanized with cover and minimum thickness of coating is 70 to 90 Microns and inside the area pregalvanized cable tray with coating is 90GSM. Thickness of perforated cable tray sheet steel for 50 mm to 300 mm cable tray = 2.0 mm thick and minimum height of the perforated cable Tray is 50 mm. Thickness of perforated cable tray sheet steel for 450 mm to 900 mm cable tray = 2.5 mm thick and inside / covered area, Factory fabricated GI Ladder type cable tray made out of 14swg sheet steel, minimum Height of the perforated cable tray is 50mm. Thickness of Ladder cable tray sheet steel cable tray = 2.5 mm thick and minimum Height of the ladder type cable tray is 50 mm. Thickness of cable tray cover for all width of cable tray is 1.6 mm | |||
| 174 | 57.01 | 100 mm (W) X 50 mm (H) wide Hot dip galvanised perforated type cable tray | Items144 | 200 | Rmt |
| 175 | 57.02 | 150 mm (W) X 50 mm (H) wide Hot dip galvanised perforated type cable tray | Items145 | 75 | Rmt |
| 176 | 57.03 | 300 mm (W) X 50 mm (H) wide Hot dip galvanised perforated type cable tray | Items146 | 200 | Rmt |
| 177 | 57.04 | 450 mm (W) X 50 mm (H) wide Hot dip galvanised ladder type cable tray | Items147 | 220 | Rmt |
| 178 | 57.05 | 600 mm (W) X 75 mm (H) wide Hot dip galvanised ladder type cable tray | Items148 | 150 | Rmt |
| 179 | 57.06 | 100 mm (W) cable tray Hot dip galvanized cover | Items149 | 200 | Rmt |
| 180 | 57.07 | 150 mm (W) cable tray Hot dip galvanized cover | Items150 | 75 | Rmt |
| 181 | 57.08 | 300 mm (W) cable tray Hot dip galvanized cover | Items151 | 200 | Rmt |
| 182 | 57.09 | 450 mm (W) cable tray Hot dip galvanized cover | Items152 | 220 | Rmt |
| 183 | 57.1 | 600 mm (W) cable tray Hot dip galvanized cover | Items153 | 150 | Rmt |
| 184 | 58 | MISCELLANEOUS:\nSupplying & installation of weather proof (IP65) emergency stop mushroom type Push button station with key lockable type fixed on wall or on required MS angle support with all its accessories as per specifications. Rate shall include Back box & accessories to fix it of approved make. | Items154 | 55 | Each |
| 185 | 59 | Supplying & installation of weather proof (IP65) ON & emergency stop Push button station with key lockable and polycarbonate enclosure fixed on wall or on required MS angle support with all its accessories as per specifications. | Items155 | 23 | Each |
| 186 | 60 | Supply, Fabrication, Grouting & Installation of structural steel in form of MS angles/tees/channels/flats etc., for supporting various items of equipments such as various cable trays, push button station, junction boxes,DBs, Plug sockets etc., including drilling, welding, grouting, chipping, bolting with supply of required hardware. Fabricated and installed structural steel shall be suitably painted with 2 coats of enamel paint after applying 2 coats of red oxide primer. Colour shade of supports shall be same as that of main shade of support structure or will be as per the site engineer approval. | Items156 | 5000 | KGS |
| 187 | 61 | Supply and laying of Rubber mat of size 1000mmx2000mmx2.5mm thick of 11K V grade as per IS 15652. | Items157 | 30 | Nos |
| 188 | 62 | CORE CUTTING TO SLAB - UPTO 250 mm THICK:\nProviding core cutting and carting away the debris outside the construction premises for followings ( stock yard shown by client) as directed. Mode of measurement : shall be payable for the pipe outside diameter only , for the following sizes | |||
| 189 | 62.01 | 50 mm | Items158 | 10 | Nos |
| 190 | 62.02 | 100 mm | Items159 | 10 | Nos |
| 191 | 62.03 | 150 mm | Items160 | 10 | Nos |
| 192 | 63 | GROUTING:\nProviding Packing the core cut hole to make it water leakage tight using fosroc chemicals like GP-2 / Micro concretefor the following sizes\nMode of measurement: shall be payable for the pipe outside diameter only. | |||
| 193 | 63.01 | 50 mm | Items161 | 10 | Nos |
| 194 | 63.02 | 100 mm | Items162 | 10 | Nos |
| 195 | 63.03 | 150 mm | Items163 | 10 | Nos |
| 196 | 64 | TERRACE FLOOR ELECTRICAL PANEL WORKS:\nMCC-1 PANEL- OUTDOOR TYPE (A-BOTTOM):\nSupply, Installation, Testing & Commissioning of MCC PANEL-1 as per standard fabrication details mentioned in technical specification and MS channel stand for panel mounting (for more details on type of panel construction and also for the details of incoming/outgoing MCCBs, VFDs, Bus Bars, DOL starters, panel push button and remote area push button interlock, logic of interlocking need to be done as per the SLD and other relevent details kindly refer electrical panel works item no.1 MCC-1 PANEL- OUTDOOR TYPE (A-BOTTOM) in sub head-3 electrical specification of tender technical specification and elecrical SLD.\n | Items164 | 1 | Set |
| 197 | 65 | MCC-2 PANEL- OUTDOOR TYPE ( C- BOTTOM):\nSupply, Installation, Testing & Commissioning of MCC PANEL-2 as per standard fabrication details mentioned in technical specification and MS channel stand for panel mounting (for more details on type of panel construction and also for the details of incoming/outgoing MCCBs, VFDs, Bus Bars, DOL starters, panel push button and remote area push button interlock, logic of interlocking need to be done as per the SLD and other relevent details kindly refer electrical panel works item no.2 MCC-2 PANEL- OUTDOOR TYPE ( C- BOTTOM) in sub head-3 electrical specification of tender technical specification and elecrical SLD.\n | Items165 | 1 | Set |
| 198 | 66 | SUB MCC-1(a) PANEL- OUTDOOR TYPE ( A- TOP):\nSupply, Installation, Testing & Commissioning of SUB MCC-1(a) as per standard fabrication details mentioned in technical specification and MS channel stand for panel mounting (for more details on type of panel construction and also for the details of incoming/outgoing MCCBs, VFDs, Bus Bars, DOL starters, panel push button and remote area push button interlock, logic of interlocking need to be done as per the SLD and other relevent details kindly refer electrical panel works item no.3 SUB MCC-1(a) PANEL- OUTDOOR TYPE ( A- TOP) in sub head-3 electrical specification of tender technical specification and elecrical SLD. | Items166 | 1 | Set |
| 199 | 67 | SUB MCC-2(a) PANEL- OUTDOOR TYPE (B-TOP):\nSupply, Installation, Testing & Commissioning of SUB MCC-2(a) as per standard fabrication details mentioned in technical specification and MS channel stand for panel mounting (for more details on type of panel construction and also for the details of incoming/outgoing MCCBs, VFDs, Bus Bars, DOL starters, panel push button and remote area push button interlock, logic of interlocking need to be done as per the SLD and other relevent details kindly refer electrical panel works item no.4 SUB MCC-2(a) PANEL- OUTDOOR TYPE ( B-TOP) in sub head-3 electrical specification of tender technical specification and elecrical SLD. | Items167 | 1 | Set |
| 200 | 68 | SUB MCC-2(b) PANEL- OUTDOOR TYPE ( C- TOP):\nSupply, Installation, Testing & Commissioning of SUB MCC-2(b) as per standard fabrication details mentioned in technical specification and MS channel stand for panel mounting (for more details on type of panel construction and also for the details of incoming/outgoing MCCBs, VFDs, Bus Bars, DOL starters, panel push button and remote area push button interlock, logic of interlocking need to be done as per the SLD and other relevent details kindly refer electrical panel works item no.5 SUB MCC-2(b) PANEL- OUTDOOR TYPE (C-TOP) in sub head-3 electrical specification of tender technical specification and elecrical SLD. | Items168 | 1 | Set |
| 201 | 69 | Commissioning of above line items and name plate, cable rout mark, ferruling, labelling, stick ring for power sockets, DBs, Panels, cables etc.\nDocumentation like technical submittal, test certificates, As-built drawings, Handing over documents & training to the client etc. | Items169 | 1 | Lot |
| 202 | 70 | FUME HOOD EXHAUST SYSTEM\nCENTRIFUGAL BLOWER & ACCESSORIES : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of Single Inlet Single Width (SISW) IMPORTED PP Exhaust Blowers direct driven by IE 2 Motor for Fume Hood Exhaust System (Solvent) with the following capacity. Drive Motor shall be suitably rated & VFD compatible, TEFC Foot mounted, 3 phase, 50 Hz, 415 Volts, IP 55, Protection Class F & Class B Temperature rise. The blower & motor assembly shall be suitable for outdoor application with neccessary anti vibration cushy foot mounting, Inlet & outlet transparent flexible hose with clamps on both ends, suitable clamp adapter, Radium Sticker for blower tag number, Electro galvanized pedestal motor stand and fasteners like bolts, nuts and washers, base frame, motor protection guard & accessories. Quoted Rate shall include for design & providing civil pedestals as per the blower Dynamic load & foundations requirement. Details to be read as blower tag number, blower capacity in CFM, blower static pressure in inch, approximate drive motor capacity. \nPlease note the blower drive motor capacity mentioned is indicative & the actual motor capacity has to be arrived on bases of actual Static Pressure drop (loss) calculation, after the vendor preparing exhaust ducting shop drawings & getting it approved from consultant. The data provided is indicative & for the purpose of tender only. | |||
| 203 | 70.01 | BLOWER TAG NO : EAB 1, CAPACITY : 12000 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 22 kW. | Items170 | 1 | Set |
| 204 | 70.02 | BLOWER TAG NO : EAB 2, CAPACITY : 8890 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items171 | 1 | Set |
| 205 | 70.03 | BLOWER TAG NO : EAB 3, CAPACITY : 7680 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items172 | 1 | Set |
| 206 | 70.04 | BLOWER TAG NO : EAB 4, CAPACITY : 6350 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 11 kW. | Items173 | 1 | Set |
| 207 | 70.05 | BLOWER TAG NO : EAB 5, CAPACITY : 10290 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 18.5 kW. | Items174 | 1 | Set |
| 208 | 70.06 | BLOWER TAG NO : EAB 6, CAPACITY : 9510 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items175 | 1 | Set |
| 209 | 70.07 | BLOWER TAG NO : EAB 7, CAPACITY : 9750 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items176 | 1 | Set |
| 210 | 70.08 | BLOWER TAG NO : EAB 8, CAPACITY : 9850 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items177 | 1 | Set |
| 211 | 70.09 | BLOWER TAG NO : EAB 9, CAPACITY : 8880 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items178 | 1 | Set |
| 212 | 70.1 | BLOWER TAG NO : EAB 10, CAPACITY : 9300 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items179 | 1 | Set |
| 213 | 70.11 | BLOWER TAG NO : EAB 11, CAPACITY : 11590 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 22 kW. | Items180 | 1 | Set |
| 214 | 70.12 | BLOWER TAG NO : EAB 12, CAPACITY : 12300 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 22 kW. | Items181 | 1 | Set |
| 215 | 70.13 | BLOWER TAG NO : EAB 13, CAPACITY : 7420 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 11 kW. | Items182 | 1 | Set |
| 216 | 70.14 | BLOWER TAG NO : EAB 14, CAPACITY : 7370 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 11 kW. | Items183 | 1 | Set |
| 217 | 70.15 | BLOWER TAG NO : EAB 15, CAPACITY : 8610 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items184 | 1 | Set |
| 218 | 70.16 | BLOWER TAG NO : EAB 16, CAPACITY : 4590 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 7.5 kW. | Items185 | 1 | Set |
| 219 | 70.17 | BLOWER TAG NO : EAB 17, CAPACITY : 8020 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items186 | 1 | Set |
| 220 | 71 | CENTRIFUGAL BLOWER & ACCESSORIES : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of Single Inlet Single Width (SISW) IMPORTED PP Exhaust Blowers direct driven by IE 2 Motor for Fume Hood Exhaust System (Acid) with the following capacity. Drive Motor shall be suitably rated & VFD compatible, TEFC Foot mounted, 3 phase, 50 Hz, 415 Volts, IP 55, Protection Class F & Class B Temperature rise. The blower & motor assembly shall be suitable for outdoor application with neccessary anti vibration cushy foot mounting, Inlet & outlet transparent flexible hose with clamps on both ends, suitable clamp adapter, Radium Sticker for blower tag number, Electro galvanized pedestal motor stand and fasteners like bolts, nuts and washers, base frame, motor protection guard & accessories. Quoted Rate shall include for design & providing civil pedestals as per the blower Dynamic load & foundations requirement. Details to be read as blower tag number, blower capacity in CFM, blower static pressure in inch, approximate drive motor capacity. \nPlease note the blower drive motor capacity mentioned is indicative & the actual motor capacity has to be arrived on bases of actual Static Pressure drop (loss) calculation, after the vendor preparing exhaust ducting shop drawings & getting it approved from consultant. The data provided is indicative & for the purpose of tender only. | |||
| 221 | 71.01 | BLOWER TAG NO : SCB 1, CAPACITY : 3600 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW | Items187 | 1 | Set |
| 222 | 71.02 | BLOWER TAG NO : SCB 2, CAPACITY : 2700 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 7.5 kW. | Items188 | 1 | Set |
| 223 | 71.03 | BLOWER TAG NO : SCB 3, CAPACITY : 3300 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items189 | 1 | Set |
| 224 | 71.04 | BLOWER TAG NO : SCB 4, CAPACITY : 2550 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 7.5 kW. | Items190 | 1 | Set |
| 225 | 71.05 | BLOWER TAG NO : SCB 5, CAPACITY : 3450 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items191 | 1 | Set |
| 226 | 71.06 | BLOWER TAG NO : SCB 6, CAPACITY : 3300 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items192 | 1 | Set |
| 227 | 71.07 | BLOWER TAG NO : SCB 7, CAPACITY : 3450 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items193 | 1 | Set |
| 228 | 71.08 | BLOWER TAG NO : SCB 8, CAPACITY : 3450 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items194 | 1 | Set |
| 229 | 71.09 | BLOWER TAG NO : SCB 9, CAPACITY : 3450 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items195 | 1 | Set |
| 230 | 71.1 | BLOWER TAG NO : SCB 10, CAPACITY : 3450 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items196 | 1 | Set |
| 231 | 71.11 | BLOWER TAG NO : SCB 11, CAPACITY : 3600 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items197 | 1 | Set |
| 232 | 71.12 | BLOWER TAG NO : SCB 12, CAPACITY : 3600 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items198 | 1 | Set |
| 233 | 71.13 | BLOWER TAG NO : SCB 13, CAPACITY : 4350 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 11 kW. | Items199 | 1 | Set |
| 234 | 71.14 | BLOWER TAG NO : SCB 14, CAPACITY : 2700 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 7.5 kW. | Items200 | 1 | Set |
| 235 | 71.15 | BLOWER TAG NO : SCB 15A, CAPACITY : 3450 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items201 | 1 | Set |
| 236 | 71.16 | BLOWER TAG NO : SCB 15B, CAPACITY : 5250 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 15 kW. | Items202 | 1 | Set |
| 237 | 71.17 | BLOWER TAG NO : SCB 16, CAPACITY : 3450 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items203 | 1 | Set |
| 238 | 71.18 | BLOWER TAG NO : SCB 17, CAPACITY : 3450 CFM, STATIC PRESSURE : 8 INCH, DRIVE MOTOR : 9.3 kW. | Items204 | 1 | Set |
| 239 | 72 | CENTRIFUGAL BLOWER & ACCESSORIES : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of Single Inlet Single Width (SISW) IMPORTED PP Exhaust Blowers direct driven by IE 2 Motor for Redundancy Blower with the following capacity. Drive Motor shall be suitably rated & VFD compatible, TEFC Foot mounted, 3 phase, 50 Hz, 415 Volts, IP 55, Protection Class F & Class B Temperature rise. The blower & motor assembly shall be suitable for outdoor application with neccessary anti vibration cushy foot mounting, Inlet & outlet transparent flexible hose with clamps on both ends, suitable clamp adapter, Radium Sticker for blower tag number, Electro galvanized pedestal motor stand and fasteners like bolts, nuts and washers, base frame, motor protection guard & accessories. Quoted Rate shall include for design & providing civil pedestals as per the blower Dynamic load & foundations requirement. Details to be read as blower tag number, blower capacity in CFM, blower static pressure in inch, approximate drive motor capacity. \nPlease note the blower drive motor capacity mentioned is indicative & the actual motor capacity has to be arrived on bases of actual Static Pressure drop (loss) calculation, after the vendor preparing exhaust ducting shop drawings & getting it approved from consultant. The data provided is indicative & for the purpose of tender only. | |||
| 240 | 72.01 | BLOWER TAG NO : R EAB 1, CAPACITY : 12000 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 22 kW | Items205 | 1 | Set |
| 241 | 72.02 | BLOWER TAG NO : R EAB 2, CAPACITY : 7680 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items206 | 1 | Set |
| 242 | 72.03 | BLOWER TAG NO : R EAB 3, CAPACITY : 10290 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 18.5 kW. | Items207 | 1 | Set |
| 243 | 72.04 | BLOWER TAG NO : R EAB 4, CAPACITY : 9750 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items208 | 1 | Set |
| 244 | 72.05 | BLOWER TAG NO : R EAB 5, CAPACITY : 9300 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items209 | 1 | Set |
| 245 | 72.06 | BLOWER TAG NO : R EAB 6, CAPACITY : 12300 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 22 kW. | Items210 | 1 | Set |
| 246 | 72.07 | BLOWER TAG NO : R EAB 7, CAPACITY : 7420 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 11 kW. | Items211 | 1 | Set |
| 247 | 72.08 | BLOWER TAG NO : R EAB 8, CAPACITY : 7370 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 11 kW. | Items212 | 1 | Set |
| 248 | 72.09 | BLOWER TAG NO : R EAB 9, CAPACITY : 8610 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items213 | 1 | Set |
| 249 | 72.1 | BLOWER TAG NO : R EAB 10, CAPACITY : 8020 CFM, STATIC PRESSURE : 5 INCH, DRIVE MOTOR : 15 kW. | Items214 | 1 | Set |
| 250 | 73 | WET SCRUBBER SYSTEM WITH ACCESSORIES FOR ACID FUMEHOOD EXHAUST SYSTEM : \nDesign, Supply, Installation, Testing, Balancing, Commissioning and preparation of handing over documents of Wet Scrubber System, Scrubber Type: Vertical with integrated liquid tank, Material: PP/FRP, Airflow: as mentioned below, Temperature: 70 deg C (max.), Pressure drop: 100 mm wg (approx.), Scrubber Sink consisting of PP Tank of suitable Dia & Height not less than 1200mm, complete with makeup water connection with control valve, water level indicator, drain with control valve, over flow pipe, scrubber recirculation pump with mechanical seal, inlet flange connection with 'Y' Strainer, outlet flanged connections with non return valve (NRV), Ball valve with gaskets, bolt & nuts, single stage PP packing rings (minimum depth of 900 mm) & single stage PVC mist eliminator pad (minimum depth of 200 mm), one set of liquid spray nozzle system, including dosing plug with valve, mounting bolt & nuts with anti vibration pads, recirculation pump of ~1 HP, 3 phase, 50 Hz, 415 Volts. Rate shall be Including for all items such as pumps cover, ladders, Radium Sticker for scrubber tag number, Airflow direction, inspection point with access platform, complete with necessary MS support & safety railing, maintenance door, painting of entire scrubber after erection & any other accessories. Rate to include for the cost of civil foundation required as per scrubber unit dimension & weight. | |||
| 251 | 73.01 | SCRUBBER TAG NO : SC 1, CAPACITY : 3600 CFM. | Items215 | 1 | Set |
| 252 | 73.02 | SCRUBBER TAG NO : SC 2, CAPACITY : 2700 CFM. | Items216 | 1 | Set |
| 253 | 73.03 | SCRUBBER TAG NO : SC 3, CAPACITY : 3300 CFM. | Items217 | 1 | Set |
| 254 | 73.04 | SCRUBBER TAG NO : SC 4, CAPACITY : 2550 CFM. | Items218 | 1 | Set |
| 255 | 73.05 | SCRUBBER TAG NO : SC 5, CAPACITY : 3450 CFM. | Items219 | 1 | Set |
| 256 | 73.06 | SCRUBBER TAG NO : SC 6, CAPACITY : 3300 CFM. | Items220 | 1 | Set |
| 257 | 73.07 | SCRUBBER TAG NO : SC 7, CAPACITY : 3450 CFM. | Items221 | 1 | Set |
| 258 | 73.08 | SCRUBBER TAG NO : SC 8, CAPACITY : 3450 CFM. | Items222 | 1 | Set |
| 259 | 73.09 | SCRUBBER TAG NO : SC 9, CAPACITY : 3450 CFM. | Items223 | 1 | Set |
| 260 | 73.1 | SCRUBBER TAG NO : SC 10, CAPACITY : 3450 CFM. | Items224 | 1 | Set |
| 261 | 73.11 | SCRUBBER TAG NO : SC 11, CAPACITY : 3600 CFM. | Items225 | 1 | Set |
| 262 | 73.12 | SCRUBBER TAG NO : SC 12, CAPACITY : 3600 CFM. | Items226 | 1 | Set |
| 263 | 73.13 | SCRUBBER TAG NO : SC 13, CAPACITY : 4350 CFM. | Items227 | 1 | Set |
| 264 | 73.14 | SCRUBBER TAG NO : SC 14, CAPACITY : 2700 CFM. | Items228 | 1 | Set |
| 265 | 73.15 | SCRUBBER TAG NO : SC 15A, CAPACITY : 3450 CFM. | Items229 | 1 | Set |
| 266 | 73.16 | SCRUBBER TAG NO : SC 15B, CAPACITY : 5250 CFM. | Items230 | 1 | Set |
| 267 | 73.17 | SCRUBBER TAG NO : SC 16, CAPACITY : 3450 CFM. | Items231 | 1 | Set |
| 268 | 73.18 | SCRUBBER TAG NO : SC 17, CAPACITY : 3450 CFM. | Items232 | 1 | Set |
| 269 | 74 | PP-FRP DUCTING WITH ACCESSORIES : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of PP-FRP ducting with glass lined (GL) finish. FRP lining shall be of fire resistant Isophthalic resin. Duct pricing shall be inclusive of all necessary accessories like - flanges, bends, entry branches, tapers, inspection door, Radium Sticker, gaskets for flanges, GI bolt & nuts, washers, support angle, hanger threaded rods with anchor bolts for fixing in roof / wall. Rate shall be inclusive of 2 coates of enamel painting for duct surface. Mode of measurement shall be in sq mtr, measured as circumference of duct outer surface x running length. Extra will not be paid for accessories such as flanges, bends, elbows, Y piece, branch off, reducer, entry doors, inspection doors, gaskets, Radium Sticker showing blower number, scrubber number, airflow directions & future provision on the duct surface etc. (Refer civil works column in tender specification. The ducting rate quoted shall be inclusive of minor civil works for duct entry in the existing service shaft & terrace floor).\nDucting upto 500 mm Dia - wall thickness shall be 3 mm PP and 3 mm FRP | Items233 | 2400 | SQM |
| 270 | 75 | PP-FRP DUCTING WITH ACCESSORIES : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of PP-FRP ducting with glass lined (GL) finish. FRP lining shall be of fire resistant Isophthalic resin. Duct pricing shall be inclusive of all necessary accessories like - flanges, bends, entry branches, tapers, inspection door, Radium Sticker, gaskets for flanges, GI bolt & nuts, washers, support angle, hanger threaded rods with anchor bolts for fixing in roof / wall. Rate shall be inclusive of 2 coates of enamel painting for duct surface. Mode of measurement shall be in sq mtr, measured as circumference of duct outer surface x running length. Extra cost will not be paid for accessories such as flanges, bends, elbows, Y piece, branch off, reducer, entry doors, inspection doors, gaskets, Radium Sticker showing blower number, scrubber number, airflow directions & future provision on the duct surface etc. (Refer civil works column in tender specification. The ducting rate quoted shall be inclusive of minor civil works for duct entry in the existing service shaft & terrace floor).\nDucting above 501 mm Dia - wall thickness shall be 4 mm PP and 4 mm FRP | Items234 | 2400 | SQM |
| 271 | 76 | VOLUME CONTROL DAMPER (Manual operation with lock & graduation arrangement) :\nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of PP FRP circular Volume control damper shall be as follows outer casing 3mmPP + 3mmFRP, flanges with 6mmPP + 3mmFRP, Disc of 5mmPP, center shaft of 20mm Dia PP with brass bush, lock & graduation arrangement with SS wing nut & blots for circular ducts. (Mode of Measurement = Cross sectional Area OR Internal face area of the damper). | Items235 | 50 | SQM |
| 272 | 77 | SUPPORTING STRUCTURE FOR PP-FRP DUCTS AT TERRACE FLOOR & BLOWER OUTLET DUCT SUPPORTING STACK FOR ALL LABS :\nDesign, Supply, Installation / Erection, Fabrication, Testing, Balancing, Commissioning and preparation of handing over documents of Blower Outlet duct support / Stack support works (at terrace only) consisting of base plates, ISA angles, Threaded rods, pipes, ISMC etc. in Testing platform, Ladder, Safety railings etc. The rate shall be inclusive of design, supply, fabrication to required size and shape, Welding, Cutting, Erection, Grouting, Anchor Bolts, Base plate, Gusset plates, brazing, GI Fasteners with washers, providing and applying of one coat of steel primer and two coats of epoxy paint of approved shade etc. Weight of steel fixed at site shall be measured for payment. Rate to include cost of civil foundation, as required. | Items236 | 25000 | KGS |
| 273 | 78 | PVC FLEXIBLE HOSE : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of PVC Braided Flexible connecting hose with Necessary Hose Clamps on both the ends. (Each Flexible length Not exceeding 1M Length)\nHOSE DIAMETER : 100 mm OD | Items237 | 50 | RMT |
| 274 | 79 | PVC FLEXIBLE HOSE : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of PVC Braided Flexible connecting hose with Necessary Hose Clamps on both the ends. (Each Flexible length Not exceeding 1M Length)\nHOSE DIAMETER : 125 mm OD | Items238 | 90 | RMT |
| 275 | 80 | PVC FLEXIBLE HOSE : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of PVC Braided Flexible connecting hose with Necessary Hose Clamps on both the ends. (Each Flexible length Not exceeding 1M Length)\nHOSE DIAMETER : 175 mm OD | Items239 | 20 | RMT |
| 276 | 81 | PVC FLEXIBLE HOSE : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of PVC Braided Flexible connecting hose with Necessary Hose Clamps on both the ends. (Each Flexible length Not exceeding 1M Length)\nHOSE DIAMETER : 275 mm OD | Items240 | 200 | RMT |
| 277 | 82 | PVC FLEXIBLE HOSE : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of PVC Braided Flexible connecting hose with Necessary Hose Clamps on both the ends. (Each Flexible length Not exceeding 1M Length)\nHOSE DIAMETER : 300 mm OD | Items241 | 5 | RMT |
| 278 | 83 | PVC FLEXIBLE HOSE : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of PVC Braided Flexible connecting hose with Necessary Hose Clamps on both the ends. (Each Flexible length Not exceeding 1M Length)\nHOSE DIAMETER : 325 mm OD | Items242 | 5 | RMT |
| 279 | 84 | MINERAL WOOL INFILL FOR PP FRP DUCT SILENCER :\nDesign, Supply, Installation / Erection, Filling & Testing of min 100 mm thick Mineral wool / Rock wool insulation material of 96 Kg/M3 density, sandwiched between the external Plain PP sheet & internal Perforated PP sheets. Insulation shall be spread equal across the silencer to avoid any air pocket. | Items243 | 1000 | Sqm |
| 280 | 85 | GAS DISTRIBUTION SYSTEM : \nSS Tubes, Fittings & Accessories :\nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for SS316 tube with 120 grit & Ra value of 1.2 to 2 µ, as per attached specification with necessary specialities like bolts, nuts, washers, U-clamps, cutting, bending, welding (Orbital welding to be considered for joining tubes without unions), Radium Tagging, wall opening and closing and sleeves has to be provided etc., The rate quoted to be inclusive of necessary wall bores, cutting through walls as per dwg. Mode of measurement shall be in running meters. \n1/4"OD X 0.87 mm WT | Items244 | 4536 | RMT |
| 281 | 86 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for SS316 Double Compression Fittings End Caps, as per attached specification. Mode of measurement shall be in numbers.\n1/4"OD | Items245 | 108 | NOS |
| 282 | 87 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for SS316 Double Compression fittings Ferule End Unions, as per attached specification. Mode of measurement shall be in numbers.\n1/4"OD | Items246 | 940 | NOS |
| 283 | 88 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for SS316 Tee, as per attached specification. Mode of measurement shall be in numbers . \n1/4"OD X 1/4"OD- Double Compression Fittings | Items247 | 490 | NOS |
| 284 | 89 | 1/4" OD SS Flexible Hose (Internal SS) with Safety Wire, 1.0 meter length for Hose ends - Tube end fittings. | Items248 | 176 | NOS |
| 285 | 90 | 1/4" OD SS Check Valves, Cracking pressure - 1 PSIG & Tube end fittings. | Items249 | 186 | NOS |
| 286 | 91 | 1/4" OD SS - 0.5 micron filter, Ends - Tube end fittings | Items250 | 176 | NOS |
| 287 | 92 | 1/4" OD SS 316 Double Compression fitting x 1/4" MNPT connector. | Items251 | 176 | NOS |
| 288 | 93 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for SS 316 BALL VALVE with tube fitting end connections, as per attached specification. Mode of measurement shall be in numbers. \n 1/4” OD | Items252 | 370 | NOS |
| 289 | 94 | 1/4” OD X 1/4" SS 316 hose nipple PU quick connector. | Items253 | 22 | NOS |
| 290 | 95 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for Line Pressure Regulator for N2, H, O2, ARG, MET & CO2 Wall Mounting, MOC : SS 316L /SS 316 , Total flow 10 -15 LPM, Inlet Pressure - 14 Bar, Outlet Pressure - 1 to 10 Bar, with Hastelloy/ Alloy X-750 Diaphragm/SS316, with Inlet & Outlet Pressure Gauge wth Inlet / Outlet Ports =1/4" FNPT. | Items254 | 93 | NOS |
| 291 | 96 | 1/4" OD SS316 Double Compression fitting x 1/4" MNPT connector. | Items255 | 186 | NOS |
| 292 | 97 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for SS 316 Flash Back Arrestor with tube fitting end connections, as per attached specification. Mode of measurement shall be in numbers. \n 1/4” OD | Items256 | 10 | NOS |
| 293 | 98 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for Gas Pre Heater for CO2, Power Supply, 230V, 50 Hz, 150/200W, 2 meter Cable, With Inlet Port - 1/4'' OD & Outlet Ports - 1/4" OD. | Items257 | 3 | NOS |
| 294 | 99 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for cylinder stand for 2 Nos. cylinder (Bracket with chain), as per attached specification. Mode of measurement shall be in numbers. | Items258 | 88 | NOS |
| 295 | 100 | COMPRESSED AIR DISTRIBUTION SYSTEM : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for Stainless Steel ERW pipes, material to SS 304(ASTM A 312 TP 304), dimensions to ANSI B 36.19 pipes with necessary slopes and specials items like flanges, gaskets, bolts, nuts, washers, U-clamps, Radium Tagging, wall opening and closing and sleeves has to be provided, elbows, tees, unions, reducers, threading, cutting, bending, welding, cutting etc., Complete Every two lengths of pipe shall be with flanged ends. The rate quoted shall include for necessary wall bores, cutting through walls, column, metal supports (ISMC, ISA) etc., Painting with two coats of enamel paint over and above two coats of red oxide paint as per relevant IS codes etc., to be considered for all sizes as per attached specification and drawing.\nNote: Mode of Pipe measurement will be centreline measurement without any additional measurement for bends, tee, reducers and fittings, supports etc. | |||
| 296 | 100.01 | 40 mm Sch 40S | Items259 | 24 | RMT |
| 297 | 100.02 | 25 mm Sch 40S | Items260 | 710 | RMT |
| 298 | 100.03 | 20 mm Sch 40S | Items261 | 1326 | RMT |
| 299 | 100.04 | 15 mm Sch 40S | Items262 | 1074 | RMT |
| 300 | 101 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for SS 304 Ball Valves of approved make as per detailed specification. | |||
| 301 | 101.01 | 40 mm dia | Items263 | 10 | NOS |
| 302 | 101.02 | 25 mm dia | Items264 | 15 | NOS |
| 303 | 101.03 | 20 mm dia | Items265 | 38 | NOS |
| 304 | 101.04 | 15 mm dia | Items266 | 242 | NOS |
| 305 | 102 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for SS 304 Non Return Valve (NRV) of approved make. . | |||
| 306 | 102.01 | 40 mm dia | Items267 | 3 | NOS |
| 307 | 102.02 | 20 mm dia | Items268 | 1 | NOS |
| 308 | 103 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for Pressure gauge Bourdon type with SS syphon and cock, Dial Size: 4", Bottom entry size: 3/8" BSP, Diaphragm: SS316 Coated with teflon, Contact parts: SS316, Movement: SS 316, Block: SS 316, Range 0 to 7 kg/cm2, Accuracy : +/- 1% of range span, Over range protection: 125%, Case & Bezel: SS 304 with screwed Bezel of ABS plastic, Mounting: Direct with bottom entry, Standard Fitments: Micro adjustable pointer (internal) blow out disc. | Items269 | 6 | Set |
| 309 | 104 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for Flanged End Micron Filter. Housing: Welded SS304, End: Flanged end Manual drain, The rate quoted shall include for supply & providing jointing materials like Teflon tape, bolts, nuts, gaskets, washers as applicable.(as per attached specification) | |||
| 310 | 104.01 | 3 micron filter, 40NB | Items270 | 2 | NOS |
| 311 | 104.02 | 0.2 micron filter, 40NB | Items271 | 2 | NOS |
| 312 | 104.03 | 3 micron filter, 25NB | Items272 | 1 | NOS |
| 313 | 104.04 | 0.2 micron filter, 25NB | Items273 | 1 | NOS |
| 314 | 105 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for AUTO MOISTURE TRAP (automatic condensate drain with float). | |||
| 315 | 105.01 | 25 mm dia | Items274 | 12 | NOS |
| 316 | 105.02 | 20 mm dia | Items275 | 68 | NOS |
| 317 | 106 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for Line Pressure Regulator for Compressed Air, MOC : Brass/Aluminium, Inlet Pressure - 10 Bar, Outlet Pressure - 0 to 8 Bar, with Coloured Identification, with Outlet Pressure Gauge wth Inlet/Outlet Ports - 40 NB MNPT . | Items276 | 2 | NOS |
| 318 | 107 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for Line Pressure Regulator for Compressed Air, MOC : Brass/Aluminium, Inlet Pressure - 10 Bar, Outlet Pressure - 0 to 8 Bar, with Coloured Identification, with Outlet Pressure Gauge wth Inlet/Outlet Ports - 25 NB MNPT . | Items277 | 12 | NOS |
| 319 | 108 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for Line Pressure Regulator for Compressed Air, MOC : Brass/Aluminium, Inlet Pressure - 10 Bar, Outlet Pressure - 0 to 8 Bar, with Coloured Identification, with Outlet Pressure Gauge wth Inlet/Outlet Ports - 20 NB MNPT . | Items278 | 34 | NOS |
| 320 | 109 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for Tank Mounted lubricated single stage rotary screw / reciprocating type, Air Cooled Air compressors (30 cfm) with dryer, dry paper type suction filter, unloader with integrated regulating valve, three way solenoid valve, Air / oil temperature sensor, air check valve, air / oil reciever tank, air / oil cooler assembly, power - 7 kw 2 pole TEFC motor, IP 55 enclosure, class F insulation, suitable for 45 deg ambient temperature & 415+/- 10% volts, 3ph, 50+/- 3% Hz supply. \nNote: Supply of Air compressor with civil structure & anchoring support with weather proof support shall be done by Air compressor vendor.(As per attached technical specification) | Items279 | 3 | NOS |
| 321 | 110 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for SS 316 tube, as per attached specification with necessary specialities like bolts, nuts, washers, U-clamps, cutting, bending , welding (Orbital) etc., The rate quoted to be inclusive of necessary wall bores, cutting through walls as per dwg. Mode of measurement shall be in running meters.\n1/4"OD X 0.87 mm WT | Items280 | 526 | RMT |
| 322 | 111 | Supply, Installation, testing and commissioning of SS316 Double Compression fittings Ferule end unions, as per attached specification. Mode of measurement shall be in numbers as described below.\n1/4'' OD | Items281 | 388 | RMT |
| 323 | 112 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for SS 316 Tee, as per attached specification. Mode of measurement shall be in numbers.\n1/4'' OD X 1/4'' OD Double compression fittings | Items282 | 196 | RMT |
| 324 | 113 | POTABLE WATER DISTRIBUTION SYSTEM :(PRESSURE BOOSTER PUMP)\nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for : Hydro Multi impeller centrifugal pump(1W+1S) skid including pressure vessel with CI suction / Discharge Port, SS 304 impeller and casing, Common suction / discharge header,matching flanges, valves, NTV, strainers, 1 Pressure transmitter, Pr.Guage, electrical/ control Panel with 1 VFD complete system mounted on common skid suitable for 3 PH, 415V 50 Hz power supply.\n85LPS@15MH. (As per attached technical specification) | Items283 | 1 | SET |
| 325 | 114 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for CPVC 4120 SDR 11/SCH40 plastic Pipe as per ASTM D-2846/ASTM F 441 pipeline with necessary slope. The rate quoted shall include for (All fittings shall be heavy duty type SCH 80 as per ASTM F439) necessary U-Trap, Unions, Reducers, Couplings, Tees, Reducer tees, Elbows, Male adapters, Female adapters, End caps, Brass couplings, Flanges, Gaskets, Clamps, Adhesives solution (ASTM F-493), Threadings, Wall bores cutting through walls, Metal supports (Clamps, ISMC, ISA), etc., as per drawing. Supports to be considered for all sizes of every 1.5 mts distance. \nNote: Mode of Pipe measurement will be centreline measurement without any additional measurement for bends, Tee, Reducers and Fittings, Supports etc., | |||
| 326 | 114.01 | 25 mm dia | Items284 | 180 | RMT |
| 327 | 114.02 | 20 mm Dia | Items285 | 264 | RMT |
| 328 | 114.03 | 15 mm Dia | Items286 | 196 | RMT |
| 329 | 115 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for CPVC Union type ball valves of approved make as per detailed specification. The rate quoted shall include for necessary fittings & Adhesives solution (ASTM F-493) etc.,\n | |||
| 330 | 115.01 | 25 mm dia | Items287 | 19 | NOS |
| 331 | 115.02 | 20 mm Dia | Items288 | 92 | NOS |
| 332 | 115.03 | 15 mm Dia | Items289 | 196 | NOS |
| 333 | 116 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for CPVC Nipples of approved make as per detailed specification. The rate quoted shall include for necessary fittings & adhesives solution (ASTM F-493) etc.,\n20 mm Dia | Items290 | 196 | NOS |
| 334 | 117 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for CPVC Tee of approved make as per detailed specification. The rate quoted shall include for necessary fittings & Adhesives solutionconfirming ASTM D2846.\n15 mm NB to 15mm NB | Items291 | 47 | NOS |
| 335 | 118 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for Flow fix valves (For Ground floor and First floor sinks only.) of approved make as per detailed specification. The rate quoted shall include for necessary fittings & Adhesives solution confirming.\n20 mm NB | Items292 | 47 | NOS |
| 336 | 119 | COOLING WATER DISTRIBUTION SYSTEM :\nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for CPVC 4120 SDR 11/SCH40 plastic Pipe as per ASTM D-2846/ASTM F 441 pipeline with necessary slope. The rate quoted shall include for (All fittings shall be heavy duty type SCH 80 as per ASTM F439) necessary U-Trap, Unions, Reducer, Coupling, Tee, Reducer tee, Elbow, Male adapter, Female adapter, End cap, Brass couplings, Flange, Gaskets, clamps, Adhesives solution (ASTM F-493), threading, Wall bores cutting through walls, Metal supports (Clamps, ISMC, ISA), etc., as per dwg to be considered for all sizes of every 1.5 mts distance. \nNote: Mode of Pipe measurement will be centre line measurement without any additional measurement for bends, Tee, reducers and fittings, supports etc.,\n15 mm Dia | Items293 | 196 | RMT |
| 337 | 120 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for CPVC Union type ball valves of approved make as per detailed specification. The rate quoted shall include for necessary fittings & Adhesives solution (ASTM F-493) etc.,\n15 mm Dia | Items294 | 196 | NOS |
| 338 | 121 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for CPVC Nipples of approved make as per detailed specification. The rate quoted shall include for necessary fittings & Adhesives solution (ASTM F-493) etc.,\n15 mm dia | Items295 | 196 | NOS |
| 339 | 122 | Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for CPVC Tee of approved make as per detailed specification. The rate quoted shall include for necessary fittings & Adhesives solutionconfirming ASTM D2846.\n15 mm NB to 15mm NB | Items296 | 196 | NOS |
| 340 | 123 | PROCESS & CONDENSATE DRAIN PIPING : \nDesign, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents for PN 10 HDPE pipes confirming to IS:4984 complete with necessary slope and fittings specials like flanges, P-Trap, end cap, bends, collar, Equal Tee, Reducing Tee, Y-type Tee, gaskets, bolts, nuts, washers, unions, heat welding,cutting,bending , etc. The rate quoted shall include for necessary wall bores cutting through walls, column, pipe clamps & MS supports (including required size of anchor fasteners type, Channels, Threaded Rods, " U " Clamp & Universal GI clamps with necessary bolts, washer and nuts, suspended in ceiling and Roof slabs etc.) to be considered for all sizes of every 1 mts distance, etc., (Excluding earth excavation) \nNote: Mode of Pipe measurement will be centre line measurement without any additional measurement for bends, Tee, reducers and fittings P-Trap , MS Supports, Clamps & bolts etc. | |||
| 341 | 123.01 | 110 mm OD - PN 10 HDPE pipes | Items297 | 12 | RMT |
| 342 | 123.02 | 75 mm OD - PN 10 HDPE pipes | Items298 | 150 | RMT |
| 343 | 123.03 | 40 mm OD - PN 10 HDPE pipes | Items299 | 204 | RMT |
| 344 | 123.04 | 25 mm OD - PN 10 HDPE pipes | Items300 | 204 | RMT |
| 345 | 124 | Supplying & Drilling / Core Cutting of required dia outlets using low vibration mechanical means. \nRCC deck slabs ( 115 to 200 mm Thick)\nCore holes for 80 mm dia pipes | Items301 | 72 | NOS |
| 346 | 125 | SUPPORTS : \nSupply and Installation of GI & STAUFF Clamp UNISTRUT Slotted Channel 41 X 41 X 2.5MM Thick/41 X 21 X 2.5MM Thick, PP Clamp With Rail Nut(For all size of tubes as per BOQ), Unistrut Channel PP End Caps, M10 GI Threaded Rod, M10 GI Plane Washer & nut, M10 GI Anchor Bolt For Threaded Rod,Tagging(Acrylic), Clean room wall support works (For tubes & hole covering plates in clean room, such as self-tapping screw SS & 40 X 6 MM THK SS FLAT With M6 Tapped Holes including welding, cutting etc.), including drilling, wall bores, cutting through walls, fixing support, welding, cutting etc. The rate quoted shall include for all above mentioned items & accessories. | Items302 | 1500 | RMT |
| 347 | 126 | Supply and Installation of of Mild Steel miscellaneous & piping structural supports consisting of plates, Anchored Plate MS(IS 2062 steel), M12 Bolts, Nuts & Expansion Bolts (High tension HILTI) , rods, angles, Square Hollow Sections, Channels, GI & STAUFF Clamp UNISTRUT Slotted Channel, beams, pipes fabricated to required design and shape as per site requirements, cage works for gas bank & equipment support and locking frame works etc. including welding, cutting, clamps, bolts, nuts, fixed with dash through fasteners, concrete supports/ foundation bolts etc. complete. The rate shall be inclusive of cost of all the materials, labour and painting with two or more coats with epoxy paint of approved make over and including priming coat of steel primer. Mode of measurement shall be in kgs of Mild steel fixed at site. | Items303 | 1500 | KGS |
| 348 | 127 | Supply and Installation of MS Shed with canopy for Housing the air compressors and Boster pump. | Items304 | 500 | KGS |
| 349 | 128 | Commissioning of above line items and equipments, piping route mark, fittings and radium stickers labelling, etc.\nDocumentation like technical submittal, test certificates, As-built drawings, Handing over documents & training to the client etc. | Items305 | 1 | LOT |
| 350 | 129 | Maintenance charge for Lab Furniture, Fume Hoods, Electrical Works, Exhaust System, Gas Piping (For all line items) for an additional period of 4 years after actual date of completion of 1 year warranty period. The warranty period starts from the actual date of system commissioning & handing over whichever is later. Refer Volume -1 for warranty & guarantee requirements (Rate is to be quoted as 1 lot). | Items306 | 1 | LOT |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
