Educational and Research Institute Boards / Undertakings / PSU Closing in 0 days TDR #23156241

Vertical Extension Of Geography Building Under Rusa At Gu Vertical Extension Of Geography Building Under Rusa At Gu Civil Sanitary Water Supply And Electrical Works

Issued by Boards / Undertakings / PSU · Gauhati University, Assam
Tender Value
1.14 Crore
Estimated cost
Bid Submission
28 Jan 2020
0 days left
EMD
2.28 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Gauhati University → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Vertical Extension Of Geography Building Under Rusa At Gu Vertical Extension Of Geography Building Under Rusa At Gu Civil Sanitary Water Supply And Electrical Works

BOQ

Name of Work: Vertical Extension of Geography Building under RUSA at GU (CIVIL, SANITARY, WATER SUPPLY & ELECTRICAL WORKS)
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11CIVIL WORKScc001
22PLAIN CEMENT CONCRETE WORKS :\nPlain Cement concrete floor base in prop 1:3:6 (1 cement : 3 sand : 6 graded agg) laid in alternate bays as specified with coarse aggregate of size 13 to 32mm including curing complete as directed. b) 50mm thickcc002391.28Sqm
33ROOF TREATMENT:\nGrading roof for water proofing treatment. a) Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) after mixing water proofing material in prop. As recommended.cc0032.3Cum
44REINFORCED CEMENT CONCRETE WORKS:\nProviding and laying plain/reinforced cement concrete works cement with coarse sand and 20mm down graded stone aggregate including dewatering if neccessary and curing complete but excluding cost of formwork and reinforcement for reinforced cement concrete work (Form work and reinforcement will be measured ansd paid separately) (I) Using mixture machine (B) In Superstructure from plinth level to 1st floor level ii) Columns, pillars, posts, struts, suspended floors,roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing.\nN) Without using admixture, plasticiser (b) M20 or prop 1:1.5:3cc00495Cum
55iii) Vertical and horizontal fins (Thickness not more than 100mm) individually or forming box louver and projected band N) Without using admixture, plasticiser (b) M20 or prop 1:1.5:3cc0050.6Cum
66Extra over item no. 2.2.1(I) above for each subsequent floor or part thereof abovecc006191.2Cum
77TIMBER SHUTTERING:\nProviding fromwork of ordinary timber planks so as to give a rough finish including centering, shuttering, strutting and proping etc. Height of proping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for insitu reinforced concrete and plain concrete works in: Sides and soffits of beam, beam hunching, cantilever, girder, bressumers and lintels and horzontal ties. a) For depth not exceeding 1.0M (ii) Using 25mm thick plankscc007690Sqm
88Flat surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, balconies, chajjas and the like. a) Floors etc upto 200mm in thickness (ii) Using 25mm thick planks.cc008176Sqm
99Vertical ties, fins, sun-breaker, louvers, bands, drop wall etc. (ii) Using 25mm thick plankscc00916Sqm
1010Extra for each subsequent floor or part thereof above over item no. 3.1.1 & 3.1.3cc0101764Sqm
1111PLYBOARD SHUTTERING:\nProviding fromwork of 12mm thick plywood board so as to give a rough finish including centering, shuttering, strutting and proping etc. Height of proping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for insitu reinforced concrete and plain concrete works\nColumns, pillars, posts and strut of Square/ Rectangular/ Polygonal in plan or any shape like Tee/L etc. having plane vertical facecc011304Sqm
1212Extra for each subsequent floor or part thereof above over item no. 3.2.1cc012304Sqm
1313BRICK WORKS:\n1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure (protruding M.S. rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In prop 1:4cc013887Sqm
1414Extra for brick walling over for each subsequent floor or part thereof \n(a) 112mm th brick wallcc0141774Sqm
1515TILES WORKS: at WALLS\nProviding polished ceramic tiles of approved quality size, shape and thickness not less than 8mm on walls and skirting over cement mortar bed 10mm thick in prop 1:3 (1cement: 3coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/ Pedelite/ Rouf/White cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering will be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). (walls mean both interior and exterior walls). b) Executive range Somany/ Orient/ Nitco/ Asian make ii) Of size 250mmx350mm and abovecc015110Sqm
161625 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing complete as directed.cc016720Sqm
1717VITRIFIED TILES :\nProviding Vitrified floor tiles of approved quality size, shape and thickness not less than 10mm on floors, skirting,risers and treads of steps over 15mm thick base of cement mortar in prop 1:3 (1cement: 3coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf/White cement slurry mixed with approved pigment to match shade of tiles, complete at all levels as specified and directed. (Cement plastering will be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the department)\na) Normal range (Somany/Orirnt/ Nitco/ Varmora/ Johnson make ii) of size 600mmx600mm and abovecc01730Sqm
1818CEMENT PLASTERING:\n10mm thick cement plaster in single coat on fair side of brick/concrete wall for ceiling plastering upto 1st floor level including arises, and/or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (a) In cement mortar 1:3cc01831Sqm
1919Extra over item no. 6.2.1 to 6.2.3 for plastering on ceiling and soffit of stairs above 1st floor level (instead of plastering on walls) including curing complete as directed i) single coat plastercc01931Sqm
2020Extra over item no. 6.2.1 to 6.2.3 for providing and mixing water proofing material in cement mortar in prop as recommended by the manufacturer including curing complete as directed i) 10 mm thick Plaster a) in cement mortar 1:3cc02031Sqm
212115mm thick cement plaster in single coat on brick/conc wall for interior plastering pto 1st floor level including arises, internal rounded angle chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed . B) On fair side b) In cement mortar 1:4cc0211280Sqm
2222Extra over item no. 6.2.1 to 6.2.5 for interior plastering above 1st floor level for every additional floor or part thereof including curing complete as directed b) On two coat plastercc0222560Sqm
2323ROOFING:\nProviding Pre painted Galvanised iron sheet roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. ( roof trusses, purlins etc. to be measured and paid separately)\n(Satyam / DuraKolor / TATA Blue scope/ Ganga / Wonder roof or equivalent) as directed by the department. (iii) 0.50 mm thickcc0231005Sqm
2424Providing Pre painted Galvanised iron sheet (PPGI) accessories (Ridge / Valley / Gutter / Flashing) at all levels including fitting and fixing with self drilling, self tapping screws complete\n(Satyam / DuraKolor / TATA Blue scope / Ganga / Wonder roof or equivalent) as directed by the department (iii) 0.50 mm thick.cc024260Rm
2525DOOR FRAMES:\nProviding, fitting and fixing powder coated pressed steel door framemade of 1.25mm/1.6mm thick sheet of various sizes with necessary hinges jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together with mechanical means with baes ties of pressed mild steel angle of size 20x20x1.25mm thick. frame to be filled up with 1:4:8 PCC after fitting the frame with brick/concrete works etc complete as directed by the department for all levels. (PCC to be measured and paid for seperately). a) 1.25mm thick sheet (iii) Size 125mm x 60mm (Single rebate)cc025144Rm
2626DOORS / WINDOWS:\nBLOCK BOARD SHUTTERS: \nProviding and fixing flush dorr shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S. code including oxidised iron butt hinges ( 100mm x 75mm x 3.5mm) 6 nos. with necessary wood screws. a) Decorative type face panel and block board core (ii) 35 mm thickcc02682Sqm
2727GRILLS:\nProviding, fitting and fixing M.S. grills of required pattern for windows/clerestory windows/openings with M.S. flats at required spacings in frame all round, square or round M.S. bars with round headed bolts and nuts or screws II. Ornamental Grill c) Fixed to Brick/Conc. wallscc0271005kg
2828ALUMINIUM DOORS, WINDOWS & GLAZING WORKS:\nProviding, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand (Hindalco/Nelco/Balco/Jindal/Other equivalent primary producer) without horizontal glazing bars joints mitered and welded (manufactured to relevenmt ISI specifications) and providing and fixing handles, angle cleats, rubber gasket, roller, bolting device, locking arrangement, screws etc as required complete as specified and directed for all levels\nb) 3 Track sliding window iv) 5mm clear glasscc028138Sqm
2929PLASTIC PAINT\nWall painting (Two coats) with plastic paint emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. a) Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)cc029997Sqm
3030Extra over item no. 13.4.7 above for painting with plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on Ceiling and on sloping roof. i) Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)cc030789.3Sqm
3131WALL PUTTY:\nProviding two coats of J.K. wall putty (white cement based putty for concrete/mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the walls with sufficient quantity of clean water as specified and directed by the department. (total thickness of two coats is maximum 1.5mm)cc0311576Sqm
3232SPECIAL WEATHER PROOF COLOURING:\nFinishing wall with water proofing weather coat smooth anti-fungal exterior painting of Ace brand of Asian Paints and of required shade on old/new wall surface after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)cc032580Sqm
3333PAINTING ON WOOD & WOOD BASED SURFACES:\nApplying priming coat over new wood and wood based surfaces over 100mm in girth/ width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knoting. \na) With ready mixed paint, wood primer (Pink).cc033165Sqm
3434Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture ( Asian/ Berger/ ICI/ J & N/ Nerolac paint) to give an even shade including cleaning the surface of dirt, dust and other foreign maetrials sand papering and stopping. i) surface over 100mm in width/girth a) General purpose Asian/ Berger/ ICI/ J & N/ Nerolac paintcc034165Sqm
3535Applying one coat of wood preservative-oil, colourless (Berger paints) on new wood and wood based surfaces, after and including preparing the wood based surfaces, after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.cc035165Sqm
3636PAINTING ON STEEL SURFACES:\nPainting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of approved brand and manufacture ( Asian/ Berger/ ICI/ J & N/ Nerolac paint) to give an even shade including cleaning the surface of dirt, dust and other foreign matter. \n( Asian/ Berger/ ICI/ J & N/ Nerolac paint) to give an even shade including cleaning the surface of dirt, dust and other foreign matter. i) surface over 100mm in width/girth a) General purpose Asian/ Berger/ ICI/ J & N/ Nerolac paintcc036276Sqm
3737ii) surface upto 100mm in width/girth a) General purpose Asian/ Berger/ ICI/ J & N/ Nerolac paint.cc037470Rm
3838ALUMINIUM FITTINGS:\nSupplying, fitting, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with countersunk holes for screws including necessary aluminium screws etc. complete (anodised to bright natural matt & satin finished) a) sliding door bolts i) 300mm x 16mmcc03812Each
3939a) sliding door bolts ii) 250mm x 16mmcc03914Each
4040b) Tower bolts ii) 250mm x 12 mmcc04038Each
4141b) Tower bolts iii) 200mm x 12 mmcc04112Each
4242c) Door/window handle i) 100mm.cc04284Each
4343STEEL WORKS:\nSupplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. \nb) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)\n (For Assam Type Bldg., drain works,,retaining wall&boundary wallcc043167.18Qtl
4444d) Extra each subsequent floor or part thereofcc044334.36Qtl
4545ROOF TRUSS:\nProviding fitting, hoisting and fixing of roof trusses including purlins fabricated out of M.S. black tubes conforming to relevent I.S. code as per approved design and drawing including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide zine chromate primer and two coats of approved enamel paint complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawings as directed. b) Using other ISI marked approved cicular hollow sectioncc045142Qtl
4646FALSE CEILING WORKS: GYPBOARD\nSupplying fitting and fixing and painting where necessary (one coat primer & two coats of paint) M/F suspended ceiling which includes G I perimeter of channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspended G I intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit of 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G I cleat and steel expansion fastners Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screw at 230mm c/c. Screw fixing is done mechanically either with screw driver or driling machine with suitable attachment. Finally, the board are to be jointed and finished so as to have a flush look which includes fitting and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, windows, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (b) 12.5mm thickcc046485.2Sqm
4747Dismentling works\nDemolishing BRICKWORK including stacking of serviceable material and disposal of unserviceable material as directed for all levels.cc04728Cum
4848Demolishing lime concrete without damaging the structure and disposal of debris as directed for all levels.cc0485.8Cum
4949Fixing & anchoring of column Reinforcement on the roof slab/beams, where there is no existing reinforcement available as required for lapping, with FISV Technology and welding after demolishing the existing lime concrete/Bk. work/RCC work of cols. and preparing the points. Welding with the existing col. reinforcement (by breaking the RCC work) and floor beam reinforcement (to be laid as per drgs.) as shown in the drawings and as directed by the Engineer-in-charge at all levels. Site Engineer of the project should ensure & certify that the welding has been carried out on all external cols(cols. in existing outer walls) necessarily as per drawings. a) 16mm Rebaring depth upto 200mm with FISV360 chargecc049258Per rod
5050b) 12mm Rebaring depth upto 150mm with FISV360 chargecc050176Per Bore
5151Supplying, fitting and fixing of ceiling fan hooks made of M.S. Flat 50mmx8mm including making hole complete as directed.cc05146Each
5252STAIRCASE WORKScc052
5353EARTH WORK:\nEarth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps,septic tank etc. including refilling (return filling) the quantity as necessary after complition of work, breaking clods in return filling,dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified including bailing out of water where necessary as directed and specified. (a) In ordinary soil.cc05348.25Cum
5454Earth/sand filling in plinth in layers not more than 150mm thick including necessary carriage,watering,ramming etc. complete as directed and specified.including payment of land compensation, Forest Royalty, Sales Tax and other duties and taxes as may be necessary. C) With silt (predominantly non plastic) by truck carriage including loading and unloadingcc05413.6Cum
5555B) With Hill sand obtained by truck including loading and unloading and carriage to the site of work.cc0554.53Cum
5656PLAIN CEMENT CONCRETE WORKS :\nPlain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (Shuttering where necessary shall be measured and paid seprarately). (a) In prop. 1 cement : 3 sand : 6 coarse agg. by volume.cc0561.3Cum
5757Providing and laying 25mm thick damp proof coarse with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in prop as recommended by the manufacturer including curing etc complete as directedcc0575.7Sqm
5858Plain Cement concrete floor base in prop 1:3:6 (1 cement : 3 sand : 6 graded agg) laid in alternate bays as specified with coarse aggregate of size 13 to 32mm including curing complete as directed. III) 100mm thick.cc05862Sqm
5959REINFORCED CEMENT CONCRETE WORKS:\nProviding and laying plain/reinforced cement concrete works cement with coarse sand and 20mm down graded stone aggregate including dewatering if neccessary and curing complete but excluding cost of formwork and reinforcement for reinforced cement concrete work (Form work and reinforcement will be measured ansd paid separately) (I) Using mixture machine\n(A) In Substructure Up to plinth level: Foundation, footings, columns with base, tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick upto plinth level. \n(b) M20 or prop 1:1.5:3\ncc0599.35Cum
6060(B) In Superstructure from plinth to 1st floor (ii) Columns, pillars, posts, struts, suspended floors,roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing. (b) M20 or prop 1:1.5:3cc06034.99Cum
6161iii) Vertical and horizontal fins (Thickness not more than 100mm) individually or forming box louver and projected band (b) M20 or prop 1:1.5:3cc0613.27Cum
6262Extra over item no. 2.2.1(I) above for each subsequent floor or part thereof above the 1st floor levelcc06240.35Cum
6363TIMBER SHUTTERING:\nProviding fromwork of ordinary timber planks so as to give a rough finish including centering, shuttering, strutting and proping etc. Height of proping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for insitu reinforced concrete and plain concrete works in:\nFoundation, footing, base of columns, pile cap, raft and mass concrete work etc. (b) Using 25mm thick plankscc06319.2Sqm
6464Sides of tie beam plinth beam, grid beam etc at or below plinth level \n(b) Using 25 mm th. Plankscc06421.6Sqm
6565In Superstructure above plinth level\nSides and soffits of beam, beam hunching, cantilever, girder, bressumers and lintels and horzontal ties. a) For depth not exceeding 1.0M (ii) Using 25mm thick plankscc065100Sqm
6666Staircases with sloping or stepped soffit including rises and stringers but excluding landings. (using 38mm th planks)cc06654.7Sqm
6767Flat surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, balconies, chajjas and the like. a) Floors etc upto 200mm in thickness (ii) Using 25mm thick planks.cc06777.4Sqm
6868Vertical ties, fins, sun-breaker, louvers, bands, drop wall etc. (ii) Using 25mm thick planks.cc06811Sqm
6969Extra for each subsequent floor or part thereof above over item no. 3.1.1 & 3.1.3cc069260.4Sqm
7070PLYBOARD SHUTTERING:\nProviding fromwork of 12mm thick plywood board so as to give a rough finish including centering, shuttering, strutting and proping etc. Height of proping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for insitu reinforced concrete and plain concrete works. Columns, pillars, posts and strut of Square/ Rectangular/ Polygonal in plan or any shape like Tee/L etc. having plane vertical face\ncc07082.1Sqm
7171Extra for each subsequent floor or part thereof above over item no. 3.2.1 \ncc07159.8Sqm
7272BRICK WORKS:\nProviding soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and material and if necessary dewatering, complete. (a) Brick on flat soling.cc07256Sqm
7373Brick work in cement mortar with 1st class bricks including racking out joints and curing complete as directed (1) in sub-structure upto plinth level including dewatering if necessary c) In prop 1:5cc0735.1Cum
74741st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure (protruding M.S. rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In prop 1:4cc074190Sqm
7575Extra for brick walling over for each subsequent floor or part thereofcc075164Sqm
7676FLOORING & FLOOR FINISHES WORKS:\nCement concrete work in topping prop 1:1:2 (1 cement : 1 sand : 2 graded agg) on RCC floor, tread, rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 Kg. Of cement per Sqm. of floor ( base concrete to be measured and paid separately) be laid in panels as directed including curing complete as directed. b) 20mm thick.cc07646Sqm
7777MARBLE FLOORING:\n18mm thick marble stone tiles in flooring including treads and risers of steps, skirting, dado, walls, pillars laid with 10mm thick base of cement plaster in prop.1:3 (1 cement: 3 coarse sand)and jointed with grey cement slurry including rubbing and polishing complete with marble tiles of specified quality and shade at all levels. (a) With 18mm thick marble stone tiles of size 600x600mm i) Dungri slabcc077100Sqm
7878CERAMIC TILES:ANTISKID\nProviding ANTISKID ceramic tiles of approved quality size, shape not less than 8mm on floors and skirting over cement mortar bed 15mm thick in prop 1:3 (1cement: 3coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/ Pedelite/ Rouf) / White cement complete at all levels as specified and directed. \nii) Executive range-1 (sizes 400mmx400mm and above) (a) Somany make - VC Shild (Group-25) (406x406)mm Delux-VCcc07819Sqm
7979CEMENT PLASTERING:\n15mm thick cement plaster in single coat on brick/conc wall for interior plastering up to 1st floor level including arises, internal rounded angle chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed . B) On Fair side b) In cement mortar 1:4cc079315Sqm
8080Extra over item no. 6.2.1 to 6.2.5 for interior plastering above 1st floor level for every additional floor or part thereof including curing complete as directed i) single coat plastercc080255Sqm
818110mm thick cement plaster in single coat on fair side of brick/concrete wall for ceiling plastering upto 1st floor level including arises, and/or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (a) In cement mortar 1:3cc081102.6Sqm
8282Extra over item no. 6.2.1 to 6.2.3 for plastering on ceiling and soffit of stairs above 1st floor level (instead of plastering on walls) including curing complete as directed i) single coat plastercc082122.7Sqm
838315mm thick cement plaster in single coat on brick/conc wall for exterior plastering up to 1st floor level including arises, internal rounded angle chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed . B) On rough side b) In cement mortar 1:4cc083284Sqm
8484Extra over item no. 6.2.1 to 6.2.3 for exterior plastering for wall for every additional floor or part thereof beyond 1st floor level including curing complete as directed i) single coat plastecc084302Sqm
8585ROOF TREATMENT:\nGrading roof for water proofing treatment. a) Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) after mixing water proofing material in prop. As recommended.cc0851.6Cum
8686DOORS:\nProviding, fitting and fixing full panelled doors/ windows including oxidised M.S. butt hinges(100 x 75 x 3.55) with necessary screws. B) 1st class local wood (Hollock/Bola/Bonsum) ii) 35mm thickcc0862.1Sqm
8787Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately).\n(a) 1.25mm thick sheet\n(iii) Size 125mm x 60mm (Single rebate)cc0875.2Metre
8888GRILLS:\nProviding, fitting and fixing M.S. grills of required pattern for windows/clerestory windows/openings with M.S. flats at required spacings in frame all round, square or round M.S. bars with round headed bolts and nuts or screws II. Ornamental Grill c) Fixed to Brick/Conc. wallscc088750kg
8989ALUMINIUM DOORS, WINDOWS & GLAZING WORKS:\nProviding, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections without horizontal glazing bars joints mitered and welded (manufactured to relevenmt ISI specifications) and providing and fixing handles, angle cleats, rubber gasket, roller, bolting device, locking arrangement, screws etc as required complete as specified and directed for all levels. a) 2 Track sliding window iv) 5mm clear glasscc0896Sqm
9090PLASTIC EMULSION\nWall painting (Two coats) with plastic paint emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.cc090300Sqm
9191WALL PUTTY:\nProviding two coats of J.K. wall putty (white cement based putty for concrete/mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the walls with sufficient quantity of clean water as specified and directed by the department. (total thickness of two coats is maximum 1.5mm)cc091474Sqm
9292SPECIAL WEATHER PROOF COLOURING:\nFinishing old / new walls with water proofing weather coat smooth anti-fungal exterior painting of Apex Brand of Asian Paints and of required shade after cleaning and clearing the srface etc. including scaffolding complete as directed at all levels (Two coats)cc092174Sqm
9393STEEL WORKS:\nSupplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. a) From primary producers: TATA/SAIL/Jindal steel/Shyam Steel/RINL.\n(ii) Super Ductile (SD) TMT reinforcement Barscc09372.48Qtl
9494d) Extra each subsequent floor or part thereofcc09446.74Qtl
9595PLINTH PROTECTION & DRAIN WORKS:\nProviding plinth protection 50mm th to cement concrete 1:3:6 with coarse agg. Of 20mm nominal size including finishing the surface with 10mm thick cement plaster in prop 1:3 with a floating coat of neat cement finish.cc09512Sqm
9696Providing drain with brick work in cement mortar in prop 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) base over one brick flat soling including 15mm thick cement plaster in prop 1:3 finished with a floating coat of neat cement slurry as directed with necessary earth work in excavation of foundation trenches and refilling the sides after completion of work as specified. ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.cc09620Rm
9797WATER PROOFING WORKS:\nPrepairing RCC surface in roof slab, chajjas, terraces, sunken slab, septic tank OH Tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, greese etc. and allowing the surface to dry complete as directed at all levels.cc097115Sqm
9898Prepairing RCC surface in expansion joints by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, greese etc. and allowing the surface to dry complete as directed at all levels.cc09824Rm
9999Applying two coats of 1mm thick acrylic polymer modified cementious water proofing coating brush bond of FOSROC chemicals for water proofing structures like roof slab, basement, sunk slab, chajjas, water tank etc. after surface preparation and soaking the surface with water prior to application complete as specified and directed by the deptt. at all levels.cc099115Sqm
100101ANTI TERMITE TREATMENT\nPre construction anti-termite treatment in back fill in immediate contact with the foundation structure, cols, walls etc to a depth of 450mm and width 300mm by applying the emulsion 5 litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor). as per the direction of the department a) with aqueous emulsion having concentration 1: 19 with chloropirophose solution (tricel or equivalent) and water i.e 1% solutioncc10151Sqm
101102Pre construction anti-termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 litres per sq. meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up soil (supplying of necessary tools and accessories by the contractor). as per the direction of the department complete. a) with aqueous emulsion having concentration 1: 19 chloropirophose solution (tricel or equivalent) and water, i.e 1% solutioncc10232Sqm
102103Pre construction anti-termite treatment by applying the soil along the external perimeter of the building (after construction is complete) to a distance close to the plinth wall as specified and as directed by the deptt. upto a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @4.5 litres per running meter ensuring moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor). as per the direction of the department complete. a) with aqueous emulsion having concentration 1: 19 chloropirophose solution (tricel or equivalent) and water i.e 1% solutioncc10318.9Rm
103104Dismentling works\nDemolishing BRICKWORK including stacking of serviceable material and disposal of unserviceable material as directed for all levels.cc1043.25Cum
104105SNITARY AND WATER SUPPLY WORKScc105
105106EUROPEAN TYPE WATER CLOSET:\nProviding fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high) with seat and lid, CP brass hinges and rubber buffers, CI/ MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets, required (Flushing cistern to be paid separately). B) Hindware make (a) white iii) Wate closet Popular \"P\" (Cat no. 20044) (Inclusive of seat cover)cc1064Each
106107PVC FLUSHING CISTERN\nSupplying, fitting & Fixing PVC Flushing cistern with all internal fittings with CI brackets including fitting & Fixing standard size CP flush pipe, union clamps etc. complete as directed and specified (Pipes will be measured separately) II) Hindware make (a) White\n(i) Sleek+ PVC cisterncc1074Each
107108URINAL:\nproviding fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader with brass unions, etc. complete including painting of fitting and brackets, cutting and making good the wall and floors wherever required.\n(B) Hindware make (a) White (iii) FB 610x410x380 (Cat no. 60002)cc1083Each
108109AUTOMATIC FLUSHING CISTERN\nSupplying, fitting & Fixing automatic Flushing cistern with all internal fittings with CI brackets including fitting & Fixing standard size CP flush pipe, union clamps etc. complete as directed and specified (Pipes will be measured separately) II) Hindware make (a) White \nAuto Cister 10 litres (Cat no. C61002)cc1093Each
109110DIVISION PLATE\nSupplying, fitting and fixing white vitreous china division plate including fitting and fixing complete as directed and specified. (ii) Hindware make (a) White (i)mDivision plate 680 x 300 (Cat no. 61001)cc1103Each
110111WASH BASIN: COUNTER TOP \nProviding vitreous china wash basin with CI/ MS brackets, C.P. brass chain with rubber plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cock, waste coupling are to be paid separately) Padestal Basin (with Padestal) (B) Hindware make (a) White (iii) Round starlet 490 dia (Cat no. 10052)cc1115Each
111112LABORATORY SINK\nProviding fitting and fixing white vitreous china laboratory sink of Parryware/ Cera make/ Hindware make with CI/ MS brackets, C.P. brass chain with rubber plug, waste coupling of standard pattern, C.P. brass chain with rubber plug, PVC waste pipe including painting of fittings and brackets, PVC waste pipe, coupling, including painting of fittings, cutting and making good the walls wherever required (B) Hindware make (a) White \n(ii) size 450x300x180mm(Cat.No. 50001) (a) White vitreous china wash basin of sizecc1122Each
112113MIRROR:\nProviding fitting and fixing mirror with plastic frame of size 500x400mm complete as directed and specified.cc1135Each
113114LIQUID SOAP CONTAINER:\nProviding fitting and fixing liquid soap dispencer and liquid soap container complete as directed and specified. (iv) SONA make (Cat no. AL-1011)cc1145Each
114115TOWEL RAIL:\nProviding fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (ii) Towel rail Diplomat 450mm long (Cat no. TR-0605)cc1153Each
115116CP ROBE HOOK:\nProviding fitting and fixing Crome plated robe hook complete as directed and specified. (b) Agmeco make \n(ii) Legend (Cat no. LD-00211)cc1164Each
116117WASTE COUPLING:\nProviding fitting and fixing Crome plated waste coupling complete as directed and specified. (b) Sona make \n(ii) Rupa 40mm (HT/FT) (Cat no. WS-0801)cc1179Each
117118PVC PIPES, BEND, JUNCTIONS, TEES ETC.:\nSupplying, fitting and fixing P.V.C pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining , fitting and fixing with clamps etc. as necessary complete at all levels including below G.L.as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia.cc11814Rm
118119ii) 110mm dia.cc11946Rm
119120iv) 75mm dia.cc12038Rm
120121Supplying, fitting and fixing 87.5 degree P.V.C. bend of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (a) In exposed surfaces or in trenches. (i) 160mm dia.cc1212Each
121122ii) 110mm diacc12212Each
122123iv) 75mm diacc12310Each
123124Supplying, fitting and fixing P.V.C. plain single tee of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (a) In exposed surfaces or in trenches. (ii) 110mm dia.cc1246Each
124125iv) 75 mm dia.cc1256Each
125126(a) Concealed by chiselling or breaking brick/CC/RCC and making good to the damages (ii) 110mm dia.cc1263Each
126127iv) 75 mm dia.cc1273Each
127128Supplying, fitting and fixing P.V.C. plain single tee with door of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (a) In exposed surfaces or in trenches. (ii) 110mm dia.cc1282Each
128129iv) 75 mm dia.cc1292Each
129130Supplying, fitting and fixing P.V.C. 'Y' of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trenches. (ii) 110mm dia.cc1303Each
130131iv) 75 mm dia.cc1311Each
131132COWEL:\nProviding fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC Cowel of ISI makecc1322Each
132133(ii) 100mm dia. PVC cowel of ISI makecc1332Each
133134GRATING:\nProviding fitting & fixing C.I. Grating to the floors complete as directed and specified. \na) 110mm dia.cc1342Each
134135Providing fitting & fixing (300x230)mm C.I. Yard gully hinged Grating to the floors complete as directed and specified.cc1352Each
135136C P Grating ii) 110mm dia.cc1365Each
136137iii) 75mm diacc1375Each
137138SOAK PIT & INSPECTION CHAMBER:\n Construction of filter bed in soak pit including Earth work in exacavation of soil and then filling up of the trench with brick bats /Dry charcoal covered woth earth over a layer of A.C. plain sheet above brick bat filling complete as directed (Size of soak pit may vary idepending on the size and capacity of the septic tanks as well as the number of users as mentioned in the table)cc1388.2Cum
138139Construction of inspection pit inside measurement 450mm x 450mm x 450mm flush with 100mm diameter HCI/PVC pipes and cement concrete basd prop. 1:3:6 over flat brick soling, 12 cm brick wall in cement mortar prop. 1:4 finished with 13mm cement plaster prop. 1:2 on side walls and floor.450mm x 450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.cc1392Each
139140INTERNAL WATER SUPPLY WORKS:\nPIPING:\nSupplying, fitting and fixing G.I.pipes of following sizes, with all necessary \"R\" Brand or similar approved G.I. fittings such as bend , tee, elbow, reducer, plug, nipple, long screw fittings, H.W. clamps etc. complete at all levels including below G.L. as directed. and as specified. (a) Exposed on walls (b) 40mm dia. (i)Using Tata makecc14040Rm
140141c) 25mm dia. (medium) (i)Using Tata makecc14140Rm
141142(B) Concealed by chiseling or breaking brick wall/C.C./R.C.C. and making good to the damaged structure e) 20mm dia (medium) i) using Tata makecc14260Rm
142143f) 15mm dia (medium) i) using Tata makecc14324Rm
143144BIB COCK:\nSupplying, fittting and fixing C.P. Bib cock 15mm dia of approved brand as directed and specified (G.I. & C.P. pipes will be measured separately) (IV) Agmeco brand iv) Bib cock long body with flange CAT no. CC 00203/CAT no. CN 00203cc1443Each
144145STOP COCK:\nSupplying, fittting and fixing chrome plated (C.P.) stop-cock of approved brand & size as mentioned below as directed and specified (G.I. & C.P. pipes will be measured separately) (II) Agmeco Brand c) Concealed stop cock 20mmcc14512Each
145146b) 15mm dia (Concealed)cc1466Each
146147PILLAR COCK:\nSupplying, fittting and fixing chrome plated (C.P.) Pillar cock of 15mm dia of approved brand as directed and specified (III) Agmeco Brand b) roundcc1471Each
147148SINK COCK:\nSupplying, fittting and fixing chrome plated (C.P.) sink-cock of approved brand as directed and specified (G.I. & C.P. pipes will be measured separately) (II) Agmeco Brand b) Sink cock two waycc1482Each
148149SENSOR:\nSupplying, fittting and fixing Sensors of Jaquar make complete as directed. b) Sensotronic Sensor Faucet for wash basin Cat No. 51027cc1495Each
149150VALVE:\nSupplying , fitting and fixing gun metal country pit valve (full way valve) as directed and specified a) 40mm diacc1501Each
150151Supplying, and fitting ball valve as specified & directed a) 25mm dia (gun metal)cc1512Each
151152WATER TANK:\nSuplying and placing palstic cylindrical vertical closed top (PCVC) tank of Sintex / polycon / Pattan make over the staging with manhole cover with locking cleaning arrangements including providing pads of size as required for inlet and outlet pipes complete as directed. ii)1500 liters ccapacitycc1522Each
152153BRICK WORK (STAGING):\nProviding brick work in cement mortar with Ist class bricks complete as directed for staging padestal for placing water tank. (b) in prop 1:4cc1532.4Cum
153154ELECTRICAL WORKScc154
154155WIRING:\nWiring to a light/fan/call bell point with 2x1.5 sq.mm. P.V.C.insulated single core unseathed industrial (Multistrand) cable FR conforming to IS-649: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kable or equivalent make as approved by this department) in suface/ Recessed conduit wiring system with 20 mm dia. 2mm thick / heavy rigid P.V.C. IS: 9537 part - III conduit (Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the deptt.) including 6 Amps. flush type switch/ bell push (Anchor penta/ Gold medal/ Kolor kany.kom/ Havells or equivalent make as approved by the deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover, ceiling rose (Anchor penta/ Gold medal/ Kolor kany.kom/ Havells or equivalent make as approved by the deptt.) etc complete. Short point upto 3.00 meter lengthcc15530Each
155156Medium point upto 6.00 metre lengthcc15678Each
156157Long point upto 10.00 metre lengthcc15750Each
157158Wiring to 5 pin 6 Amps plug point with 1.5 sq.mm. P.V.C.insulated single core unseathed industrial (Multistrand) cable FR conforming to IS-649: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kable or equivalent make as approved by this department) in suface/ Recessed 2mm thick / heavy rigid P.V.C. IS: 9537 part - III rigid PVC conduit (Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the deptt.) wiring system including 5 pin 6 Amps. flush type plug socket and 6 Amps F/T switch (Anchor penta/ Gold medal/ Kolor kany.kom/ Havells or equivalent make as approved by the deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm cable to third pin of th plug socket etc. as required complete when placed else where . Short point upto 3.00 meter lengthcc1582Each
158159Medium point upto 6.00 metre lengthcc1598Each
159160Long point upto 10.00 metre lengthcc1608Each
160161Wiring to 5/6 pin 16 Amps plug point with 4 sq.mm. P.V.C.insulated single core unseathed industrial (Multistrand) cable FR conforming to IS-649: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kable or equivalent make as approved by this department) in suface/ Recessed conduit wiring system\nincluding 5 pin 6 Amps. flush type plug socket and 6 Amps F/T switch (Anchor penta/ Gold medal/ Kolor kany.kom/ Havells or equivalent make as approved by the deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover including earth continuity with 2.5 sq. mm cable to third pin of th plug socket etc. as required complete with 20mm dia. 2mm thick / heavy ISI marked IS: 9537 part - III rigid PVC conduit (Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the deptt.) Short point upto 3.00 meter lengthcc1613Each
161162Medium point upto 6.00 metre lengthcc16210Each
162163Long point upto 10.00 metre lengthcc16311Each
163164Wiring for drawing sub-main line P.V.C.insulated single core unseathed industrial (Multistrand) cable FR conforming to IS-649: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kable or equivalent make as approved by this department) PVC conduit (Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the deptt.) including earth continuity in surface/ recessed 20mm dia. 2mm thick / heavy ISI marked IS: 9537 part - III rigid PVC conduit wiring system. 2 x2.5 sq. mm.+ earth continuity with 1x1.5 sq mm in20mm dia. 2mm thick / heavyrigid PVC IS: 9537 part - III conduitcc164450Per Metre
164165With 2 x 4 sq. mm + earth continuity 1x2.5 sq mm PVC insulated unsheathed single core copper conductor cable in 20 mm dia. 2mm thick / heavyrigid PVC IS: 9537 part - III conduit.cc16560Per Metre
165166With 2 x 6 sq. mm + earth continuity 1x4 sq. mm cable in 25 mm Dia. 2mm thick / heavyrigid PVC IS: 9537 part - III conduit.cc166200Per Metre
166167With 2 x 10 sq. mm + earth continuity 1x6 sq. mm cable in 25 mm Dia. 2mm thick / heavyrigid PVC IS: 9537 part - III conduit.cc16740Per Metre
167168Wiring to 5 pin 6 Amps plug point with 1.5 sq.mm. P.V.C.insulated single core unseathed industrial (Multistrand) cable FR conforming to IS-649: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kable or equivalent make as approved by this department) including 5 pin 6 Amps. flush type plug socket outlet (Anchor penta/ Gold medal/ Kolor kany.kom/ Havells or equivalent make as approved by the deptt.) and 6 Amps F/T switch (Anchor penta/ Gold medal/ Kolor kany.kom/ Havells or equivalent make as approved by the deptt.) earthing the third pin of th plug socket as required on the switch board in surface / recessed PVC conduit wiringsystem. When fitted on same board of light and fan.cc16840Each
168169Wiring for twin control light point with 1.5 sq.mm. P.V.C.insulated single core unseathed industrial (Multistrand) cable FR conforming to IS-649: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kable or equivalent make as approved by this department) in suface/ Recessed conduit wiring system with 20 mm dia. 2mm thick / heavy rigid P.V.C. IS: 9537 part - III conduit (Berlia/ AKG/ Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the deptt.) including 6 Amps. flush type 2 way switch (Anchor penta/ Gold medal/ Kolor kany.kom/ Havells or equivalent make as approved by the deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover, ceiling rose (Anchor penta/ Gold medal/ Kolor kany.kom/ Havells or equivalent make as approved by the deptt.) etc complete. Long point upto 10.00 meter lengthcc1692Each
169170CCTV\nsupplying installation testing and commissioning of 1/3\" Super HAD colour CCD, 540 TV Lines, 0.3 LUX, 3mm Fixed lens, Auto iris, compact, light weight, DC12V (SAMSUNG or equivalent PELCO/ HONEYWELL/PANASONIC make)cc1701Each
170171MCBDB, MCB, MCCB\nSupplying including fitting and fixing sheet steel, phosphatised, power painted single door surface mounting MCB DB incorporated with bus-bar, neutral link, earth bar and din rail etc. fitted on wall with grouting nuts and bolts as required complete with necessary connection as approved, specified and directed by the deptt. (ABB, Schneider MG, Legrand, Hager, Crabtree xpro make) 4 way SPN single doorcc1714Each
171172Supplying fitting and fixing industrial Plug & Socket in surface mounting TPN sheet steel power painted MCB DB incorporated with MCB Din rail, neutral link, earth bar of the following rating of 4P MCB complete with necessary connection etc as specified and directed by the deptt. (C& S, Havells, Standard or equivalent make as approved by the Deptt.) 30/32A Capacitycc1728Each
172173Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable over load and short circuit setting, without enclosure of the following capacity complete with making necessary connection as specified and directed by the department . 50KA (ABB, Schneider, Legrand, l&t, Siemens, Hager c&s make) 400Acc1731Each
173174Supplying with fitting and fixing TPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as specified and requied complete by the department . B series (ABB, Schneider MG, Legrand, Hager, Crabtree Xpro make)\n6 to 32Acc17436Each
17417563Acc1752Each
175176C series (ABB, Schneider MG, Legrand, Hager Crabtree Xpro make) 125Acc1761Each
176177Supplying with fitting and fixing Over voltage protector at 400V network (Schneider or equivalent make) complete with making necessary connection as approved, specified and directed by the department . MCCB with Thermal & Magnetic Releasecc1771Each
177178PANEL BOARD:\nSupply, fabrication, errection, testing commissioning of vermin and dust proof (IP-43 protection) totally enclosed cubical type compartmental floor mounting panel board of size 1700mm x 1000mm x 500mm made of 16 SWG(1.66mm) thick C.R. sheet and 300mm x 30mm x 5mm MS angle having 4 nos legs at the bottom and C.R. sheet roofing on the top complete with 2 coats of red oxide metal primer and painting with powder coated paint. Panel board is to be erected in 1:3:6 PCC foundation including excavation complete\n neatly wiring done, with provision for the following electrical accessories. Provision for 250A 4 Pole 50KA 415V MCCB with rotaty handle INCOMING. Provision for 6 nos TPN MCCB OUTGOING. \n 0-250A Ammeter (Digital)....1 \n0-500V Voltmeter (Digital)......1 \nAmmeter S/S in 3 position.....1 \nVoltmeter S/S in 3 position....1 \nIndicator Lamp (R,Y,B)......3 \n2A Slide Lock Fuse.....3 250/5 CT coils.......3 Control wiring along with required size of copper busbar.......1 (incoming and outgoing MCCB/MCB will be paid extra)cc1781Each
178179FITTINGS & ACCESSORIES\nSupplying and fixing batten holder incluing 11 W CFL/ LED lamp and connection as approved by the deptt. As requiredcc17928Each
179180Supplying and fixing bulk head fitting suitable for CFL/ LED lamp complete with all accessories including 20 Watts CFL and connection as approved by the deptt. As required.cc18018Each
180181Supplying and fixing 250/305 mm dia. (nominal size) flush type circular ceilling fittings complete with holder, aluminium anodized back plate and brass holder, 20Watt CFL/LED lamp including connections as approved by the deptt. as requiredcc18112Each
181182Sleek Box type luminaires complete with Electronic ballast and plastic holder brackets/ top cover & decorative dual end cap with 1 x 36 / 40 watt fluorescent tube/ LED Tube (Crompton Greaves make) Model DJB 1314LDB50 / DJBN1314EB CROMTEX with Power Lux lamp/ DMLUN36EB Mirrorlite ultra slim with supper saver lamp or equivalent (equivalent will be selected by the deptt considering the mother items rate) PHILIPS/ WIPRO/ BAJAJ/ HAVELLS/ HPL/ SOLAR/ JAQUAR makecc18280Each
182183Striplite luminaires complete with Electronic ballast and decorative end cap with 1 x 36 / 40 watt fluorescent tube/LED Tube (Crompton Greaves make) Model DJB 1314LDB50 / DJBN1314EB CROMTEX with Super saver / Super Brite lamp or equivalent (equivalent will be selected by the deptt considering the mother items rate) PHILIPS/ WIPRO/ BAJAJ/ HAVELLS/ HPL/ SOLAR/ JAQUAR make.cc1834Each
183184Supplying including fitting and fixing of high speed AC ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with necessary connections etc. as approved by the Deptt. as required complete and as directed by the department. (without regulator) Standard model 1400 mm sweep (Orient PSPO make / Usha make / Havells make / Crompton make / ATC / V Gaurd make)cc18445Each
184185Standard model 1200 mm sweep (Usha make) / (Havells make) / (Orient PSPO make)cc1854Each
185186Supplying includind fitting and fixing of following AC Exhaust fan in the existing hole on the wall of following sweeps and making necessary connections as approved by the deptt. as required complete and as directed by the department. Heavy Duty 450mm sweep 900 RMP single phase (Orient make)cc1863Each
186187Supplying fitting and fixing ceiling fan regulator including connection complete as required Electronic Typecc18748Each
187188EARTH STATION:\nSupply, Installation & testing of Copper plate earth station with 600x600x3mm copper earth plate with necessary 40mm dia G.I. medium duty watering pipe with G.I. fittings such as socket, Tee, elbow, nipple and 50mm x 40mm G.I. reducing socket for funnel including locking arrangement with 300mm x 300mm x6mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.cc1881Each
188189Extra for using salt (5 kg.) and charcoal (96 kg.) in G.I./copper plate earth station pit to provide low impedance ground in location of high soil resistivity as & when required and specified by the deptt.cc1891Each
189190Supplying & laying of 8 SWG copper Earth from earth electrode (below GL) to electrical switch gears or electrical machineries includind making necessary connection as approved, specified and directed by the deptt.cc19040Metre
190191Providing fitting and fixing of lightning finial Arrester made of 25 mm dia. 300mm long copper tube having single prong top with 85mm dia. 3mm thick copper base plate at bottom complete with fitting and fixing with brass bolts & nuts on roof, RCC slab, top of column etc. as specified and directed by the deptt.cc1912Each

AI Tender Summary

OUR REF NO 23156241
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 1.14 Crore
LAST DATE 28-01-2020
Authority
Authority Name University Gauhati University
Work Description Vertical Extension Of Geography Building Under Rusa At Gu Vertical Extension Of Geography Building Under Rusa At Gu Civil Sanitary Water Supply And Electrical Works
Basic Detail
Tender No T/19-20/284 Date.02.01.2020
Bidding Type Tender
Location
City Gauhati University
State Assam
Key Dates
Publish Date 07 Jan 2020
Submission Date 28 Jan 2020
Open Date 29 Jan 2020
Finance
Tender Value 1.14 Crore
Tender Fee 2000
EMD 2.28 Lakhs
Exemption Not Available
Document List
FormOfBid.pdf
Tendernotice_1.pdf
BOQ_23839.xls
4746F9D7-0AD0-4C2F-B558-C6912423AFF3.html
NIT.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jan 07, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 28, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 29, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

FormOfBid.pdf

pdf

Tendernotice_1.pdf

xls

BOQ_23839.xls

html

4746F9D7-0AD0-4C2F-B558-C6912423AFF3.html

pdf

NIT.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders