Construction Of New District Jail ( Phase Ii ) - Civil Works , Electrical Work , Sanitary , Water Supply , Site Preparation Etc At Narainpur In Hailakandi District
Tender Value
16.44 Crore
Estimated cost
Bid Submission
14 Jan 2020
0 days left
EMD
32.89 Lakhs
Bank guarantee accepted
Document Fee
15000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Narainpur, Hailakandi District → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New District Jail ( Phase Ii ) - Civil Works , Electrical Work , Sanitary , Water Supply , Site Preparation Etc At Narainpur In Hailakandi District
BOQ
| Name of Work: Construction of New District Jail ( Phase II) - Civil works, Electrical Work, Sanitary, water Supply, Site preparation etc at Narainpur in Hailakandi District | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | (1) RCC GROUND FLOOR ADMINISTRATIVE BUILDING \nCIVIL WORKS:- \nSurface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | 397.1 | Sqm | |
| 2 | 2 | Earth work in excavation for foundation trences of walls, retaining walls, footing of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2m below the existing ground level. (a) In ordinary soil. | 213.15 | Cum | |
| 3 | 3 | (B) Extra over item No. 1.1 (A) above for each 1 m depth or part thereof beyond the initial depth of 2 m. | 25.03 | Cum | |
| 4 | 4 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering where necessary shall be measured and paid separately). (a) In prop. 1 cement: 3 sand: 6 coarse aggregate by volume. | 6.25 | Cum | |
| 5 | 5 | (b) In prop. 1 cement: 4 sand: 8 coarse aggregate by volume. | 5.5 | Cum | |
| 6 | 6 | Providing and laying 25mm thick damp proof coarse with cement concrete in prop. 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 28 | Sqm | |
| 7 | 7 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 39 | Cum | |
| 8 | 8 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 100 | Cum | |
| 9 | 9 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforced concrete and plain concrete work. (A) In sub structure upto plinth level: Foundation, footing, columns with base, tie and plinth beam, pile cape, base slab, retaining walls, walls of septic tank, inspection pit and the like upto plinth level. (i) using 25mm thick plank. | 25 | Sqm | |
| 10 | 10 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M b) using 25mm thick | 110 | Sqm | |
| 11 | 11 | Columns, pillars, posts & strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having palne vertical face. (ii) Using 25 mm thick plank. | 38 | Sqm | |
| 12 | 12 | Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in : (1) Columns, pillars, post and strut of square / rectangular / poligonal in plan or any shape like Tee / L etc. having plain vertical face. | 175 | Sqm | |
| 13 | 13 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M | 145 | Sqm | |
| 14 | 14 | Flat surface such as soffits of suspended floors, roof, landings, cantilever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness | 200 | Sqm | |
| 15 | 15 | Staircase with sloping or stepped soffits including risers and stringers but excluding landing. | 23.55 | Sqm | |
| 16 | 16 | Providing soling in foundation and under floor at all levels with stone/best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials complete. (a) Brick flat soling | 251 | Sqm | |
| 17 | 17 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In prop. 1:5 | 34.5 | Cum | |
| 18 | 18 | 112mm thick 1st class brick nogged wall in cement mortar embedded with protruding rod in column including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protruding M.S. rod/ tor steel will be measured and paid separately under relevant item of steel work) (c) In cement mortar in prop. 1:5 | 329 | Sqm | |
| 19 | 19 | Cement concrete works in topping 1:1:2 (1 cement, 1 sand : 2 graded aggregates on RCC floor , tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg of cement per sq m of floor (base concrete to be measured and paid separately) to be laid in panels including curing complete as directed. (b) 20 mm thick. | 31 | Sqm | |
| 20 | 20 | Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 210 | Sqm | |
| 21 | 21 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 190 | Sqm | |
| 22 | 22 | 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (b) In cement mortar 1:4 | 182.5 | Sqm | |
| 23 | 23 | B) On fair side (b) In Cement mortar 1:4 | 91 | Sqm | |
| 24 | 24 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii)Super Ductile (SD) TMT reinforcement bars | 68 | Qntl | |
| 25 | 25 | (c) I.S.I. approved M.S. Rod | 2.5 | Qntl | |
| 26 | 26 | Providing fitting & fixing steel windows of standard rolled steel sections as per relevant I.S Code,joints mitredand welded with 15mm x 13mm x 100mm lugs embedded in cement concrete block of M- 10 grade including providing and fixing of projecting hinges (not more than 65mm and not less han 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mm x 12mm sqare bars duly welded to steel frame at not more than 120mm c/c applying a priming coat of red-lead paint etc. complete as per drawing a) Openable. | 23.15 | Sqm | |
| 27 | 27 | Providing fitting & fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S Code, joints mitred and welded with 15mm x 13mm x 100mm lugs emdedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2 nos. of 12mm x 12mm sqare bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing | 6 | Sqm | |
| 28 | 28 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 268 | Kg | |
| 29 | 29 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 20 | Sq.m. | |
| 30 | 30 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 60 | RM | |
| 31 | 31 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100mmx75mmx3.5mm) 6Nos. With necessary wood screws. (b) Non decorative type and block board core. (ii) 35mm thick. | 14.5 | Sqm | |
| 32 | 32 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished) (A) Sliding door bolts (ii) 250 mm x 16 mm | 12 | Each | |
| 33 | 33 | (B) Tower bolts (iii) 200 mm x 12 mm | 7 | Each | |
| 34 | 34 | (C) Door handles (iii) 150 mm | 7 | Each | |
| 35 | 35 | Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | 37 | Sqm | |
| 36 | 36 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. (ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | 70 | Rm | |
| 37 | 37 | Earth / Sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, Forest Royalty, Sales tax and other duties & taxes as may be necessary. (b) with hill sand obtained by truck carriage including loading and un loading, and carriage to the site of work. | 66.97 | Cum | |
| 38 | 38 | (c) With river sand or silt (Predominalty non plastic) by truck carriage including loading and unloading. | 27.15 | Cum | |
| 39 | 39 | Grading roof for water proofing treatment (a) Cement Concrete (i) 1:2:4 | 3.25 | Cum | |
| 40 | 40 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden beadings including necessary cutting of glass to required sizes (payment for wooden beads shall be made separately) (II) Area of glass panes exceeding 0.15 sq.m but not exceeding 0.52 sq.m b) 4.00 mm thick. | 28 | Sqm | |
| 41 | 41 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture to give and even shade including cleaning the surface of all dirt, dust and other foreign materials, sand papering and stopping. (I) Surface over 100mm in width or girth. (b) High gloss (Asian paint / Berger paint/ ICI paint / J&N paint / Nerolac) paint. | 115 | Sqm | |
| 42 | 42 | (c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 375 | Sqm | |
| 43 | 43 | (f) Distempering with dry distemper of approved brand and manufac ture ( two coats) and of reuired shade on new wall surface to give an even shade over and including priming coat of white primer after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing surface even and sand papered smooth. | 375 | Sqm | |
| 44 | 44 | (h) Distempering with dry distemper of approved brand and manufacture (one coat) and of required shade on old wall surface to give an even shade, after throughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing surface even and sand papered smooth. | 375 | Sqm | |
| 45 | 45 | (a) Applying one coat of cement primer of approved brand & manufacture on new wall surface after thoroughly brooming the surface free from mortar droppings & other foreign matter & including preparing the surface even and sand papered smooth. | 185 | Sqm | |
| 46 | 46 | (b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after thoroughly brooming the surfacesto remove all dirt and remains of loose powdered materials. | 185 | Sqm | |
| 47 | 47 | (d) Extra over item No. (b) and (c) for every subsequent coat of water proofing cement paint of pproved brand and manufacture. | 185 | Sqm | |
| 48 | 48 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | 23 | Cum | |
| 49 | 49 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). | 250 | Sqm | |
| 50 | 50 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned in above item (I) 112mm thick brick /R.B wall. | 150 | sqm | |
| 51 | 51 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | 150 | Sqm | |
| 52 | 52 | Providing precast RCC slab in prop. 1:2:4 reinforced with 10 mm TMT/HYSD bars @ 150 mm centre both ways tying with 20 guage black annealed wire with necessary shuttering, curing etc. complete including fixing in position as directed. (a) 100 mm thick slab. | 6 | Sqm | |
| 53 | 53 | Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. (c) Using ordinary cement | 20 | Sqm | |
| 54 | 54 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.(A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate | 40 | Sqm | |
| 55 | 55 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. | 419 | Sqm | |
| 56 | 56 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). a) Normal range Somany/ Orient / Nitco / Asian Make (i) of size 300mmx300mm and above | 5 | Sqm | |
| 57 | 57 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). b) Executive range Somany/ Orient/Nitco/Asian Make i) of size 200mmx300mm and above | 20 | Sqm | |
| 58 | 58 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary land compensation, Municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% duduction for shrinkage to be made from total quantity) etc. complete as directed and specified, including forest royalty within a distance of 8.00 km. (forest royalty shall be reimbursed on production of necessary certificate from the forest authority duly counter signed by D.F.O. concerned). (b) Other than Guwahati city | 100 | Sqm | |
| 59 | 59 | SANITARY & WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm b) Coloured ii) Hindware make | 2 | Each | |
| 60 | 60 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\nii) Hindware make b) Coloured (i) Sleek+ PVC cistern | 2 | Sqm | |
| 61 | 61 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) :: Basin (without pedestal) (B) Hindware Make (a) White (iii) Viking 550 x 400 (Cat.No.10008) | 2 | Each | |
| 62 | 62 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 2 | Each | |
| 63 | 63 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (ii) Agmeco Make (a) Cubin (Cat. No.CB-00102) | 2 | Each | |
| 64 | 64 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 30 | RM | |
| 65 | 65 | (iv) 75 mm dia | 6 | RM | |
| 66 | 66 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 2 | Each | |
| 67 | 67 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (v) 63mm dia. PVC cowel of ISI make | 2 | Each | |
| 68 | 68 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 6 | Cum | |
| 69 | 69 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 4 | Each | |
| 70 | 70 | Supplying fitting and fixing G.I. pipes of following sizes, with all necessary approved G.I. fitting such as bend, tee, eibow reducer, nipple, plug, long screw fitting H.W. clamps etc. complete at all level including below G.L. as directed and specified. (A) Exposed on walls (d) 25mm dia (i) Using TATA (Medium) | 30 | Rm | |
| 71 | 71 | (ii) Concealed by chiselling or breaking brick wall C.C. / RCC and making good to the damages. (f) 15 mm dia (i) Using Tata (Medium) | 15 | Rm | |
| 72 | 72 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified ( G.I. & C.P. pipes will be measured separately) (I) Essco make (Delux/Sumthing spl./Tropical) (b) Long body bib cock with wall flange | 2 | Each | |
| 73 | 73 | Supplying and fitting ball valve as specified and directed. (a) 25mm dia (Gun metal) | 2 | Each | |
| 74 | 74 | Supplying fitting & fixing chrome plated (C.P) stop Cock of approved brand and size as mentioned below a below as directed and specified (G.I & C.P pipes Will be measured and paid separately). (I) Jaquar (a) Continental / Clarion (ii) 15mm dia( Angular stop cock with long thread ) | 2 | Each | |
| 75 | 75 | Supplying fitting & fixing CP pillar cock of 25mm dia of approved brand as specified and directed. (I) Sona make (d) Heavy type | 2 | Each | |
| 76 | 76 | Supplying, fitting and placing in position plastic cylindrical vertical closed top (PCVC) tank of Sintex / Polycon / Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed. (iii) 1000 ltr. (a) Sintex tank | 1 | Each | |
| 77 | 77 | FIRE FIGHTING WORKS\nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 1 | Each | |
| 78 | 78 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 5 | RM | |
| 79 | 79 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 1 | each | |
| 80 | 80 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 1 | Each | |
| 81 | 81 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 1 | Each | |
| 82 | 82 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 1 | Each | |
| 83 | 83 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 1 | Each | |
| 84 | 84 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 5 | Each | |
| 85 | 85 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 5 | Each | |
| 86 | 86 | POT PLANTING\nSupplying and planting of palms with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(B) With Erica palm (Butterfly palm)/ Kentia palm\n(II) Using earthen pot of 60 cm dia. | 5 | Each | |
| 87 | 87 | POT PLANTING\nSupplying and planting of seasonal flower in required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(II) Using earthen pot of 60 cm dia. | 5 | Each | |
| 88 | 88 | BED PLANTING\nSupplying and planting of Dahlia / Chrysanthemum / Gladiolus on the ground ( bed planting, bed size 45 cm x 45 cm x 45 cm) including the preparation of the soil, providing organic manure and fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . | 5 | Each | |
| 89 | 89 | TREE PLANTING \nSupplying and planting of ornamental trees (1'-0\" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed \nSHADE TREE\n(A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar | 5 | Each | |
| 90 | 90 | TREE PLANTING \nSupplying and planting of ornamental trees (1'-0\" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed \nFLOWERING TREE\n(A) Gulmohar / Ashok | 5 | Each | |
| 91 | 91 | SHRUB PLANTING \nSupplying and planting of ornamental shrub ( below 1'-0\" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed \n(B) Allmanda / Khorika zai / May flower / Kamini / Kathanda / Tecoma / Acalypha / Bougainvillea / Dracaena / Togor / Nilakantha / Mussaenda | 5 | Each | |
| 92 | 92 | Providing treatment of constructional joints in R.C.C. walls and slabs by supplying, mixing and applying a 2-component epoxy resin based bonding agent for old to new concrete like Master Bond - EP/ Concresive 1414 of BASF/Dr. Sealkit Bond OTN (Asian Chemicals) (with an open time of 6 hours at 30 deg Celsius) as per detailed drawings or as specified and directed by the Department complete at all levels. (i) Slab/ Wall thickness upto 200mm | 15 | RM | |
| 93 | 93 | Providing Grouting in R.C.C. walls & slabs by drilling holes @ 300mm c/c upto half of the wall depth in zigzag manner or as per drawings using a drill machine and fixing a nozzle of 20mm dia. for injecting a grout/ grout slurry till the refusal of injected grout material from adjacent nozzle (grouting operation pressure shall be in between 2 to 4kg per sq.cm.). Followed by cutting the exposed nozzle so as to make the wall free from the grouting pipes and to seal the gap with polymer modified mortar as specified and directed by the Department complete at all levels. (a) Grout slurry of cement, water and grout admixture Cebex 100 of Fosroc Chemicals /Flowcable 50 of BASF/Dr. Sealkit NSPG (Asian Chemicals) @ 225gms per bag of cement | 15 | Sqm. | |
| 94 | 94 | ELECTRICAL WORK: \nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point. (b) Medium point ………………….. | 50 | P/P | |
| 95 | 95 | Ceiling Fan Point. (b) Medium point ………………….. | 18 | P/P | |
| 96 | 96 | Exhust Fan © Long point ………………….. | 7 | P/P | |
| 97 | 97 | Call bell Point Medium point ………………….. | 2 | P/P | |
| 98 | 98 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 16 | P/P | |
| 99 | 99 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Medium point up to 6.00 metre. Length. | 15 | Each | |
| 100 | 100 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Long point up to 10.00 metre. Length. | 1 | Each | |
| 101 | 101 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 720 | Rm | |
| 102 | 102 | (b) With 2 x 4 sq. mm + 1 x 2.5 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 180 | Rm | |
| 103 | 103 | Supplying and fixing of call bell (Buzzer ) including 5/6 Amp capacity button piano type bell push switch including connection as approved by the dep't.as required. | 2 | Each | |
| 104 | 104 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt.\n Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 20 | Each | |
| 105 | 105 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 20 | Each | |
| 106 | 106 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. \n Trans Air 300 mm sweep (Crompton make) | 7 | Each | |
| 107 | 107 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 14 | Each | |
| 108 | 108 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 40 | Each | |
| 109 | 109 | Supplying with fitting & fixing sheet steel phosphatised, power painted Single door surface mounting MCB DB incorporated with bas-bar, neutral link, earth bar and din rail etc. fitted on wall with grouting nuts & bolts as per reqd. complete with making necessary connection as specified and directed by the deptt. (ABB,Schneider MG,legrand,Hager,Crabtreexpro make) 8 Way SPN Single door | 2 | Each | |
| 110 | 110 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series. (ABB, Schneider MG, legrand, Hager make) 40 A | 2 | Each | |
| 111 | 111 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. 6 A to 32A | 14 | Each | |
| 112 | 112 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 11KV gd aluminium conductor LT armoured U.G. cable laid in ground/partially in air (10% sq mm balance stranded conductor,XLPE insulated,cores laid up PVC tape inner sheathed,Armour(Aluminium for single core up to 70 sq.mm balance aluminium strip,Galvanish for cables up to 2x10 sq.mm 3x10 sq.mm,4x6 sq.mm balance all galvanish steel strip)extruded PVC type ST2 sheathed,650/1100V grade as per IS 7908(part 1) 1988 armoured U.G Cable U.G cable laid in ground/partially in air(as required for termination over ground including excavation of cable treanch up to depth of 75cm,refilling,protective brick covering,sand cushioning etc complete handing of surplus spoil,debris etc to proper place as specified and directed by the deptt.(Nicco / Havells/ RPG / CCI /Polycab/Gloster/ Finolex made or equivalent) 3 & 1/2 Core A2XFY. 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 40 | Metre | |
| 113 | 113 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 114 | 114 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 115 | 115 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 20 | R.m | |
| 116 | 116 | (2) 2- STORIED RCC BUILDING FOR 40 SEATED BARRACK \nCIVIL WORKS:- Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | 380.8 | Sqm | |
| 117 | 117 | Earth work in excavation for foundation trences of walls, retaining walls, footing of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2m below the existing ground level. (a) In ordinary soil. | 419.5 | Cum | |
| 118 | 118 | (B) Extra over item No. 1.1 (A) above for each 1 m depth or part thereof beyond the initial depth of 2 m. | 25 | Cum | |
| 119 | 119 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering where necessary shall be measured and paid separately). (a) In prop. 1 cement: 3 sand: 6 coarse aggregate by volume. | 30 | Cum | |
| 120 | 120 | (b) In prop. 1 cement: 4 sand: 8 coarse aggregate by volume. | 18 | Cum | |
| 121 | 121 | Providing and laying 25mm thick damp proof coarse with cement concrete in prop. 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 70 | Sqm | |
| 122 | 122 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 190 | Cum | |
| 123 | 123 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 425 | Cum | |
| 124 | 124 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforced concrete and plain concrete work. (A) In sub structure upto plinth level: Foundation, footing, columns with base, tie and plinth beam, pile cape, base slab, retaining walls, walls of septic tank, inspection pit and the like upto plinth level. (i) using 25mm thick plank. | 180 | Sqm | |
| 125 | 125 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M b) using 25mm thick | 250 | Sqm | |
| 126 | 126 | Columns, pillars, posts & strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having palne vertical face. (ii) Using 25 mm thick plank. | 200 | Sqm | |
| 127 | 127 | Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in : (1) Columns, pillars, post and strut of square / rectangular / poligonal in plan or any shape like Tee / L etc. having plain vertical face. | 380 | Sqm | |
| 128 | 128 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M | 280 | Sqm | |
| 129 | 129 | Flat surface such as soffits of suspended floors, roof, landings, cantilever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness | 900 | Sqm | |
| 130 | 130 | Staircase with sloping or stepped soffits including risers and stringers but excluding landing. | 100 | Sqm | |
| 131 | 131 | Providing soling in foundation and under floor at all levels with stone/best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials complete. (a) Brick flat soling | 600 | Sqm | |
| 132 | 132 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In prop. 1:5 | 100 | Cum | |
| 133 | 133 | 112mm thick 1st class brick nogged wall in cement mortar embedded with protruding rod in column including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protruding M.S. rod/ tor steel will be measured and paid separately under relevant item of steel work) (c) In cement mortar in prop. 1:5 | 780 | Sqm | |
| 134 | 134 | Cement concrete works in topping 1:1:2 (1 cement, 1 sand : 2 graded aggregates on RCC floor , tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg of cement per sq m of floor (base concrete to be measured and paid separately) to be laid in panels including curing complete as directed. (b) 20 mm thick. | 400 | Sqm | |
| 135 | 135 | Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 780 | Sqm | |
| 136 | 136 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 800 | Sqm | |
| 137 | 137 | 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (b) In cement mortar 1:4 | 600 | Sqm | |
| 138 | 138 | B) On fair side (b) In Cement mortar 1:4 | 300 | Sqm | |
| 139 | 139 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii)Super Ductile (SD) TMT reinforcement bars | 344 | Qntl | |
| 140 | 140 | (c) I.S.I. approved M.S. Rod | 8 | Qntl | |
| 141 | 141 | Providing fitting & fixing steel windows of standard rolled steel sections as per relevant I.S Code,joints mitredand welded with 15mm x 13mm x 100mm lugs embedded in cement concrete block of M- 10 grade including providing and fixing of projecting hinges (not more than 65mm and not less han 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mm x 12mm sqare bars duly welded to steel frame at not more than 120mm c/c applying a priming coat of red-lead paint etc. complete as per drawing a) Openable. | 49 | Sqm | |
| 142 | 142 | Providing fitting & fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S Code, joints mitred and welded with 15mm x 13mm x 100mm lugs emdedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2 nos. of 12mm x 12mm sqare bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing | 12 | Sqm | |
| 143 | 143 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 265 | Kg | |
| 144 | 144 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 30 | Sq.m. | |
| 145 | 145 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 150 | RM | |
| 146 | 146 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100mmx75mmx3.5mm) 6Nos. With necessary wood screws. (b) Non decorative type and block board core. (ii) 35mm thick. | 45 | Sqm | |
| 147 | 147 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished) (A) Sliding door bolts (ii) 250 mm x 16 mm | 24 | Each | |
| 148 | 148 | (B) Tower bolts (iii) 200 mm x 12 mm | 10 | Each | |
| 149 | 149 | (C) Door handles (iii) 150 mm | 10 | Each | |
| 150 | 150 | Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | 75 | Sqm | |
| 151 | 151 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. (ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | 120 | Rm | |
| 152 | 152 | Earth / Sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, Forest Royalty, Sales tax and other duties & taxes as may be necessary. (b) with hill sand obtained by truck carriage including loading and un loading, and carriage to the site of work. | 350 | Cum | |
| 153 | 153 | (c) With river sand or silt (Predominalty non plastic) by truck carriage including loading and unloading. | 80 | Cum | |
| 154 | 154 | Grading roof for water proofing treatment (a) Cement Concrete (i) 1:2:4 | 6.5 | Cum | |
| 155 | 155 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden beadings including necessary cutting of glass to required sizes (payment for wooden beads shall be made separately) (II) Area of glass panes exceeding 0.15 sq.m but not exceeding 0.52 sq.m b) 4.00 mm thick. | 60 | Sqm | |
| 156 | 156 | (c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 720 | Sqm | |
| 157 | 157 | (f) Distempering with dry distemper of approved brand and manufac ture ( two coats) and of reuired shade on new wall surface to give an even shade over and including priming coat of white primer after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing surface even and sand papered smooth. | 720 | Sqm | |
| 158 | 158 | (h) Distempering with dry distemper of approved brand and manufacture (one coat) and of required shade on old wall surface to give an even shade, after throughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing surface even and sand papered smooth. | 720 | Sqm | |
| 159 | 159 | (a) Applying one coat of cement primer of approved brand & manufacture on new wall surface after thoroughly brooming the surface free from mortar droppings & other foreign matter & including preparing the surface even and sand papered smooth. | 380 | Sqm | |
| 160 | 160 | (b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after thoroughly brooming the surfacesto remove all dirt and remains of loose powdered materials. | 380 | Sqm | |
| 161 | 161 | (d) Extra over item No. (b) and (c) for every subsequent coat of water proofing cement paint of pproved brand and manufacture. | 380 | Sqm | |
| 162 | 162 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | 23 | Cum | |
| 163 | 163 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). | 250 | Sqm | |
| 164 | 164 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned in above item (I) 112mm thick brick /R.B wall. | 150 | sqm | |
| 165 | 165 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | 150 | Sqm | |
| 166 | 166 | Providing precast RCC slab in prop. 1:2:4 reinforced with 10 mm TMT/HYSD bars @ 150 mm centre both ways tying with 20 guage black annealed wire with necessary shuttering, curing etc. complete including fixing in position as directed. (a) 100 mm thick slab. | 17 | Sqm | |
| 167 | 167 | Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. (c) Using ordinary cement | 40 | Sqm | |
| 168 | 168 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.(A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate | 80 | Sqm | |
| 169 | 169 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. | 880 | Sqm | |
| 170 | 170 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). a) Normal range Somany/ Orient / Nitco / Asian Make (i) of size 300mmx300mm and above | 40 | Sqm | |
| 171 | 171 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). b) Executive range Somany/ Orient/Nitco/Asian Make i) of size 200mmx300mm and above | 179 | Sqm | |
| 172 | 172 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary land compensation, Municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% duduction for shrinkage to be made from total quantity) etc. complete as directed and specified, including forest royalty within a distance of 8.00 km. (forest royalty shall be reimbursed on production of necessary certificate from the forest authority duly counter signed by D.F.O. concerned). (b) Other than Guwahati city | 100 | Sqm | |
| 173 | 173 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 394.05 | Sqm | |
| 174 | 174 | SANITARY & WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm b) Coloured ii) Hindware make | 8 | Each | |
| 175 | 175 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\nii) Hindware make b) Coloured (i) Sleek+ PVC cistern | 8 | Sqm | |
| 176 | 176 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) :: Basin (without pedestal) (B) Hindware Make (a) White (iii) Viking 550 x 400 (Cat.No.10008) | 8 | Each | |
| 177 | 177 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 8 | Each | |
| 178 | 178 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (ii) Agmeco Make (a) Cubin (Cat. No.CB-00102) | 8 | Each | |
| 179 | 179 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 30 | RM | |
| 180 | 180 | (iv) 75 mm dia | 6 | RM | |
| 181 | 181 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 15 | Each | |
| 182 | 182 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (v) 63mm dia. PVC cowel of ISI make | 4 | Each | |
| 183 | 183 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 6 | Cum | |
| 184 | 184 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 8 | Each | |
| 185 | 185 | Supplying fitting and fixing G.I. pipes of following sizes, with all necessary approved G.I. fitting such as bend, tee, eibow reducer, nipple, plug, long screw fitting H.W. clamps etc. complete at all level including below G.L. as directed and specified. (A) Exposed on walls (d) 25mm dia (i) Using TATA (Medium) | 30 | Rm | |
| 186 | 186 | (ii) Concealed by chiselling or breaking brick wall C.C. / RCC and making good to the damages. (f) 15 mm dia (i) Using Tata (Medium) | 15 | Rm | |
| 187 | 187 | Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) a) Continental (i) Shower arm 190mm long light body with wall flange | 8 | Each | |
| 188 | 188 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified ( G.I. & C.P. pipes will be measured separately) (I) Essco make (Delux/Sumthing spl./Tropical) (b) Long body bib cock with wall flange | 16 | Each | |
| 189 | 189 | Supplying and fitting ball valve as specified and directed. (a) 25mm dia (Gun metal) | 16 | Each | |
| 190 | 190 | Supplying fitting & fixing chrome plated (C.P) stop Cock of approved brand and size as mentioned below a below as directed and specified (G.I & C.P pipes Will be measured and paid separately). (I) Jaquar (a) Continental / Clarion (ii) 15mm dia( Angular stop cock with long thread ) | 16 | Each | |
| 191 | 191 | Supplying fitting & fixing CP pillar cock of 25mm dia of approved brand as specified and directed. (I) Sona make (d) Heavy type | 16 | Each | |
| 192 | 192 | Supplying, fitting and placing in position plastic cylindrical vertical closed top (PCVC) tank of Sintex / Polycon / Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed. (iii) 1000 ltr. (a) Sintex tank | 2 | Each | |
| 193 | 193 | FIRE FIGHTING WORKS \nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 2 | Each | |
| 194 | 194 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 10 | RM | |
| 195 | 195 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 2 | each | |
| 196 | 196 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 2 | Each | |
| 197 | 197 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 2 | Each | |
| 198 | 198 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 2 | Each | |
| 199 | 199 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 2 | Each | |
| 200 | 200 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 10 | Each | |
| 201 | 201 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 10 | Each | |
| 202 | 202 | ELECTRICAL WORKS :\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point. (b) Medium point ………………….. | 80 | each | |
| 203 | 203 | © Long point ………………….. | 41 | each | |
| 204 | 204 | Ceiling Fan Point. (b) Medium point ………………….. | 52 | each | |
| 205 | 205 | Exhust Fan. © Long point ………………….. | 12 | each | |
| 206 | 206 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 12 | each | |
| 207 | 207 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Long point up to 10.00 metre. Length. | 38 | Each | |
| 208 | 208 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Long point up to 10.00 metre. Length. | 32 | Each | |
| 209 | 209 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits.(a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 1426 | Rm | |
| 210 | 210 | (b) With 2 x 4 sq. mm + 1 x 2.5 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 1432 | Rm | |
| 211 | 211 | (b) With 2 x 6 sq. mm + 1 x 4 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 440 | Metre. | |
| 212 | 212 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 52 | each | |
| 213 | 213 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 52 | each | |
| 214 | 214 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. Trans Air 300 mm sweep (Crompton make) | 12 | Each | |
| 215 | 215 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 41 | each | |
| 216 | 216 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate) Philips/ Wipro/ Bajaj/Havells/HPL /Solar/ Jaquar make. | 80 | each | |
| 217 | 217 | Philips make) Cat No.SGP 401 1xSONT-150W For Lamp 1xSONT-150W (IP-65) / Crompton Greaves make) SSGN1215H/FG For lamp 1x150W HPSV (T) / Havells: LHBW20115036 For lamp 1x150W SON-T. | 4 | Each | |
| 218 | 218 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 6 way SPN double door | 4 | Each | |
| 219 | 219 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 40A | 4 | Each | |
| 220 | 220 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. 6 A to 32A | 18 | each | |
| 221 | 221 | Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.7MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 250A 4pole 415V MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:\n1. 20mm X 5mm 4 strip copper Bus-Bar 0.6M length each\n2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no\n3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no\n4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no\n5. Voltmeter & Ammeter Selector Switch - 2 no\n6. 2 A Slide fuse unit - 3nos. \n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) \n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | 1 | Each | |
| 222 | 222 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 2 | each | |
| 223 | 223 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 2 | each | |
| 224 | 224 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | 71 | Metre. | |
| 225 | 225 | Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 25 KA 415V 50 Hz 4P MCCB \n(Schneider, legrand, Siemens, Indo Asian make) 125A | 1 | Each | |
| 226 | 226 | Supplying with fitting and fixing Single Phase D.O.L Starter of the following specification complete including making necessary connection as approved, specified and directed by the deptt. Overload Relay Range 3.8 - 6.0 Amps for 2.2 KW | 1 | Each | |
| 227 | 227 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 11KV gd aluminium conductor LT armoured U.G. cable laid in ground/partially in air (10% sq mm balance stranded conductor,XLPE insulated,cores laid up PVC tape inner sheathed,Armour(Aluminium for single core up to 70 sq.mm balance aluminium strip,Galvanish for cables up to 2x10 sq.mm 3x10 sq.mm,4x6 sq.mm balance all galvanish steel strip)extruded PVC type ST2 sheathed,650/1100V grade as per IS 7908(part 1) 1988 armoured U.G Cable U.G cable laid in ground/partially in air(as required for termination over ground including excavation of cable treanch up to depth of 75cm,refilling,protective brick covering,sand cushioning etc complete handing of surplus spoil,debris etc to proper place as specified and directed by the deptt.(Nicco / Havells/ RPG / CCI /Polycab/Gloster/ Finolex made or equivalent) 3 & 1/2 Core A2XFY. 50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 88 | Metre | |
| 228 | 228 | (3) WATCH TOWER(4 NOS.) CIVIL WORK:- \nEarthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.(A) Up to a depth of 2.00m below the existing ground level.(a) In ordinary soil | 4.82 | Cum | |
| 229 | 229 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(a) Brick on flat soling. | 60.72 | Sqm | |
| 230 | 230 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL(i) TMT Corrosion resistant steel (CRS) reiforcement bar | 39 | Qtl | |
| 231 | 231 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(b) Using 25mm thick plank | 36 | Sqm | |
| 232 | 232 | Sides of tie beams, grade beams etc. at or below ground level.(b) Using 25mm thick plank | 19.92 | Sqm | |
| 233 | 233 | Columns, Pillars, Posts & Strut(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face(ii) Using 25mm thick plank | 203.92 | Sqm | |
| 234 | 234 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.(a) For depth not exceeding 1.0M.(ii) Using 25mm thick plank | 49.84 | Sqm | |
| 235 | 235 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200mm in thickness.(ii) Using 25mm thick plank | 16.4 | Sqm | |
| 236 | 236 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine(A) In substructure up to plinth levelFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.b) M20 grade concrete or Prop. 1:1.5:3 | 16.53 | cum | |
| 237 | 237 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.b) M20 grade concrete or Prop. 1:1.5:3 | 19.95 | cum | |
| 238 | 238 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).(b) In prop 1cement: 4 sand :8 coarse aggregate by volume | 0.24 | cum | |
| 239 | 239 | 230mm thick brick wall in cement morter with 1st class brick including racking out joints and curing complete as directed in structure (I) In Sub-structure upto plinth level including dewatering if necessary(b). In proportion 1:4. | 19.52 | Sqm | |
| 240 | 240 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)(A) 112mm thick brick wall(a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 49.44 | Sqm | |
| 241 | 241 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. a) TATA make Circular Hollow section- CHS of Grade YST-310 conforming to I.S. Specification : 1161-1998 | 3.3 | Qtl | |
| 242 | 242 | Providing corrugated galvenised Iron sheet roofing of TATA SHAKTEE / SAIL including fitting and fixing necessary galvenised J or L hooks, bolts and nuts 8 mm dia with bitumen washer 25 mm dia x 3 mm thick and 1.6 mm thick limpet washer complete excluding cost of roof truss, purlin etc. (Roof trusses and purlin etc.to be measured and paid separately). (e) 0.63 mm thick | 29.4 | Sqm | |
| 243 | 243 | Providing galvd iron ridging of TATA SHAKTEE / SAIL including supplying and fixing necessary galvd screws/washers etc. complete as directed.(e) 0.63 mm thick (ii) 230 mm lapping | 32.8 | RM | |
| 244 | 244 | Providing 0.63 mm thick(24 gauge) galvd plain sheet in valley , lining, flashing etc. and fitted with gavd. Iron J or L hook bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in a positions as directed. | 41.76 | Sqm | |
| 245 | 245 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | 46.4 | R.M. | |
| 246 | 246 | Providing, fitting and fixing fly-proof galvd. M.S. wire gauge of I.S. designation 85 G with wire of dia. of 0.56mm to windows and clerestory windows including timber beading of size 50mmx 20mm complete.a) With 1st class local timber bead | 6.4 | Sq.m. | |
| 247 | 247 | Providing, fitting and fixing in position false ceiling of 6mm thick Bison panel (cement bonded particle board) on timber frame of 1st class local wood (Hollock/ Bonsum/ Sundi) of 50mm x 50mm spaced at not more than 1.20m apart , fixed to the wall at the end with necessary nails, wood screws, hooks,bolts etc. including painting (one coat primer and two coats of painting) as necessary complete as directed by the Department for all levels.(a) Both sides commercial | 16 | Sqm | |
| 248 | 248 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough sideb) In cement mortar 1:4 | 395.64 | Sqm | |
| 249 | 249 | Finishing old/ new wall with water proofing weather coat smooth anti-fungal premium acrylic smooth exterior finish of Snowcryl XT brand of Snowcem India Ltd. of required shade after clering and clearing the surfaces etc. including scaffolding complete as directed at all levels (two coats). | 395.64 | Sqm | |
| 250 | 250 | Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.a) In beams and joists with connecting plates/ angled cleat. | 41.54 | Qtl | |
| 251 | 251 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed.(a) 15 mm thick | 17.8 | Sq.m | |
| 252 | 252 | (4) 2-STORIED RCC BUILDING FOR MALE PRISONERS BARRACK (5 NOS.) CIVIL WORK:- Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | 2026.75 | Sqm | |
| 253 | 253 | Earth work in excavation for foundation trences of walls, retaining walls, footing of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2m below the existing ground level. (a) In ordinary soil. | 2025 | Cum | |
| 254 | 254 | (B) Extra over item No. 1.1 (A) above for each 1 m depth or part thereof beyond the initial depth of 2 m. | 125 | Cum | |
| 255 | 255 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering where necessary shall be measured and paid separately). (a) In prop. 1 cement: 3 sand: 6 coarse aggregate by volume. | 175 | Cum | |
| 256 | 256 | (b) In prop. 1 cement: 4 sand: 8 coarse aggregate by volume. | 95 | Cum | |
| 257 | 257 | Providing and laying 25mm thick damp proof coarse with cement concrete in prop. 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 350 | Sqm | |
| 258 | 258 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 525 | Cum | |
| 259 | 259 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 625 | Cum | |
| 260 | 260 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforced concrete and plain concrete work. (A) In sub structure upto plinth level: Foundation, footing, columns with base, tie and plinth beam, pile cape, base slab, retaining walls, walls of septic tank, inspection pit and the like upto plinth level. (i) using 25mm thick plank. | 400 | Sqm | |
| 261 | 261 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M b) using 25mm thick | 900 | Sqm | |
| 262 | 262 | Columns, pillars, posts & strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having palne vertical face. (ii) Using 25 mm thick plank. | 500 | Sqm | |
| 263 | 263 | Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in : (1) Columns, pillars, post and strut of square / rectangular / poligonal in plan or any shape like Tee / L etc. having plain vertical face. | 700 | Sqm | |
| 264 | 264 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M | 700 | Sqm | |
| 265 | 265 | Flat surface such as soffits of suspended floors, roof, landings, cantilever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness | 2500 | Sqm | |
| 266 | 266 | Staircase with sloping or stepped soffits including risers and stringers but excluding landing. | 400 | Sqm | |
| 267 | 267 | Providing soling in foundation and under floor at all levels with stone/best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials complete. (a) Brick flat soling | 2050 | Sqm | |
| 268 | 268 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In prop. 1:5 | 500 | Cum | |
| 269 | 269 | 112mm thick 1st class brick nogged wall in cement mortar embedded with protruding rod in column including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protruding M.S. rod/ tor steel will be measured and paid separately under relevant item of steel work) (c) In cement mortar in prop. 1:5 | 3900 | Sqm | |
| 270 | 270 | Cement concrete works in topping 1:1:2 (1 cement, 1 sand : 2 graded aggregates on RCC floor , tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg of cement per sq m of floor (base concrete to be measured and paid separately) to be laid in panels including curing complete as directed. (b) 20 mm thick. | 2000 | Sqm | |
| 271 | 271 | Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 3900 | Sqm | |
| 272 | 272 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 2508 | Sqm | |
| 273 | 273 | 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (b) In cement mortar 1:4 | 3000 | Sqm | |
| 274 | 274 | B) On fair side (b) In Cement mortar 1:4 | 1500 | Sqm | |
| 275 | 275 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii)Super Ductile (SD) TMT reinforcement bars | 1075 | Qntl | |
| 276 | 276 | (c) I.S.I. approved M.S. Rod | 40 | Qntl | |
| 277 | 277 | Providing fitting & fixing steel windows of standard rolled steel sections as per relevant I.S Code,joints mitredand welded with 15mm x 13mm x 100mm lugs embedded in cement concrete block of M- 10 grade including providing and fixing of projecting hinges (not more than 65mm and not less han 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mm x 12mm sqare bars duly welded to steel frame at not more than 120mm c/c applying a priming coat of red-lead paint etc. complete as per drawing a) Openable. | 175 | Sqm | |
| 278 | 278 | Providing fitting & fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S Code, joints mitred and welded with 15mm x 13mm x 100mm lugs emdedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2 nos. of 12mm x 12mm sqare bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing | 60 | Sqm | |
| 279 | 279 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 1300 | Kg | |
| 280 | 280 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 110 | Sq.m. | |
| 281 | 281 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 175 | RM | |
| 282 | 282 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100mmx75mmx3.5mm) 6Nos. With necessary wood screws. (b) Non decorative type and block board core. (ii) 35mm thick. | 225 | Sqm | |
| 283 | 283 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished) (A) Sliding door bolts (ii) 250 mm x 16 mm | 120 | Each | |
| 284 | 284 | (B) Tower bolts (iii) 200 mm x 12 mm | 50 | Each | |
| 285 | 285 | (C) Door handles (iii) 150 mm | 50 | Each | |
| 286 | 286 | Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | 375 | Sqm | |
| 287 | 287 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. (ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | 600 | Rm | |
| 288 | 288 | Earth / Sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, Forest Royalty, Sales tax and other duties & taxes as may be necessary. (b) with hill sand obtained by truck carriage including loading and un loading, and carriage to the site of work. | 1750 | Cum | |
| 289 | 289 | (c) With river sand or silt (Predominalty non plastic) by truck carriage including loading and unloading. | 400 | Cum | |
| 290 | 290 | Grading roof for water proofing treatment (a) Cement Concrete (i) 1:2:4 | 32.5 | Cum | |
| 291 | 291 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden beadings including necessary cutting of glass to required sizes (payment for wooden beads shall be made separately) (II) Area of glass panes exceeding 0.15 sq.m but not exceeding 0.52 sq.m b) 4.00 mm thick. | 300 | Sqm | |
| 292 | 292 | (c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 3600 | Sqm | |
| 293 | 293 | (f) Distempering with dry distemper of approved brand and manufac ture ( two coats) and of reuired shade on new wall surface to give an even shade over and including priming coat of white primer after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing surface even and sand papered smooth. | 3600 | Sqm | |
| 294 | 294 | (h) Distempering with dry distemper of approved brand and manufacture (one coat) and of required shade on old wall surface to give an even shade, after throughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing surface even and sand papered smooth. | 3600 | Sqm | |
| 295 | 295 | (a) Applying one coat of cement primer of approved brand & manufacture on new wall surface after thoroughly brooming the surface free from mortar droppings & other foreign matter & including preparing the surface even and sand papered smooth. | 1900 | Sqm | |
| 296 | 296 | (b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after thoroughly brooming the surfacesto remove all dirt and remains of loose powdered materials. | 1900 | Sqm | |
| 297 | 297 | (d) Extra over item No. (b) and (c) for every subsequent coat of water proofing cement paint of pproved brand and manufacture. | 1900 | Sqm | |
| 298 | 298 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | 115 | Cum | |
| 299 | 299 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). | 1250 | Sqm | |
| 300 | 300 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned in above item (I) 112mm thick brick /R.B wall. | 750 | sqm | |
| 301 | 301 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | 750 | Sqm | |
| 302 | 302 | Providing precast RCC slab in prop. 1:2:4 reinforced with 10 mm TMT/HYSD bars @ 150 mm centre both ways tying with 20 guage black annealed wire with necessary shuttering, curing etc. complete including fixing in position as directed. (a) 100 mm thick slab. | 90 | Sqm | |
| 303 | 303 | Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. (c) Using ordinary cement | 200 | Sqm | |
| 304 | 304 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.(A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate | 400 | Sqm | |
| 305 | 305 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. | 4400 | Sqm | |
| 306 | 306 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). a) Normal range Somany/ Orient / Nitco / Asian Make (i) of size 300mmx300mm and above | 200 | Sqm | |
| 307 | 307 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). b) Executive range Somany/ Orient/Nitco/Asian Make i) of size 200mmx300mm and above | 895 | Sqm | |
| 308 | 308 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary land compensation, Municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% duduction for shrinkage to be made from total quantity) etc. complete as directed and specified, including forest royalty within a distance of 8.00 km. (forest royalty shall be reimbursed on production of necessary certificate from the forest authority duly counter signed by D.F.O. concerned). (b) Other than Guwahati city | 500 | Sqm | |
| 309 | 309 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 1254 | Sqm | |
| 310 | 310 | SANITARY & WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm b) Coloured ii) Hindware make | 10 | Each | |
| 311 | 311 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\nii) Hindware make b) Coloured (i) Sleek+ PVC cistern | 10 | Sqm | |
| 312 | 312 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) :: Basin (without pedestal) (B) Hindware Make (a) White (iii) Viking 550 x 400 (Cat.No.10008) | 10 | Each | |
| 313 | 313 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 10 | Each | |
| 314 | 314 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (ii) Agmeco Make (a) Cubin (Cat. No.CB-00102) | 10 | Each | |
| 315 | 315 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 150 | RM | |
| 316 | 316 | (iv) 75 mm dia | 30 | RM | |
| 317 | 317 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 10 | Each | |
| 318 | 318 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (v) 63mm dia. PVC cowel of ISI make | 10 | Each | |
| 319 | 319 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 30 | Cum | |
| 320 | 320 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 10 | Each | |
| 321 | 321 | Supplying fitting and fixing G.I. pipes of following sizes, with all necessary approved G.I. fitting such as bend, tee, eibow reducer, nipple, plug, long screw fitting H.W. clamps etc. complete at all level including below G.L. as directed and specified. (A) Exposed on walls (d) 25mm dia (i) Using TATA (Medium) | 150 | Rm | |
| 322 | 322 | (ii) Concealed by chiselling or breaking brick wall C.C. / RCC and making good to the damages. (f) 15 mm dia (i) Using Tata (Medium) | 75 | Rm | |
| 323 | 323 | Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) a) Continental (i) Shower arm 190mm long light body with wall flange | 10 | Each | |
| 324 | 324 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified ( G.I. & C.P. pipes will be measured separately) (I) Essco make (Delux/Sumthing spl./Tropical) (b) Long body bib cock with wall flange | 10 | Each | |
| 325 | 325 | Supplying and fitting ball valve as specified and directed. (a) 25mm dia (Gun metal) | 10 | Each | |
| 326 | 326 | Supplying fitting & fixing chrome plated (C.P) stop Cock of approved brand and size as mentioned below a below as directed and specified (G.I & C.P pipes Will be measured and paid separately). (I) Jaquar (a) Continental / Clarion (ii) 15mm dia( Angular stop cock with long thread ) | 10 | Each | |
| 327 | 327 | Supplying fitting & fixing CP pillar cock of 25mm dia of approved brand as specified and directed. (I) Sona make (d) Heavy type | 10 | Each | |
| 328 | 328 | Supplying, fitting and placing in position plastic cylindrical vertical closed top (PCVC) tank of Sintex / Polycon / Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed. (iii) 1000 ltr. (a) Sintex tank | 10 | Each | |
| 329 | 329 | FIRE FIGHTING WORKS\nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 10 | Each | |
| 330 | 330 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 50 | RM | |
| 331 | 331 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 10 | each | |
| 332 | 332 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 10 | Each | |
| 333 | 333 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 10 | Each | |
| 334 | 334 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 10 | Each | |
| 335 | 335 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 10 | Each | |
| 336 | 336 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 50 | Each | |
| 337 | 337 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 50 | Each | |
| 338 | 338 | ELECTRICAL WORKS: \nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Medium point up to 6.00 metre. Length. | 365 | Each | |
| 339 | 339 | Long point up to 10.00 metre. Length. | 525 | Each | |
| 340 | 340 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan.Medium point up to 6.00 metre. Length. | 40 | Each | |
| 341 | 341 | Long point up to 10.00 metre. Length. | 40 | Each | |
| 342 | 342 | Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including providing & fixing 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) earthing the 3rd pin of the socket as required on the switch board in flat ISI marked casing 'n' capping system, when fitted on same board of light and fan. | 200 | Each | |
| 343 | 343 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Long point up to 10.00 metre. Length. | 20 | Each | |
| 344 | 344 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity.\nWith 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system. | 3975 | Metre. | |
| 345 | 345 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system. | 3175 | Metre. | |
| 346 | 346 | With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system. | 1385 | Metre. | |
| 347 | 347 | Supplying and fixing of Call bell ( Buzzer ) including 5/ 6 amp capacity button piano type bell push switch including connection as approved by the Deptt.)as required. | 40 | Each | |
| 348 | 348 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. Premium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make)\n | 280 | Each | |
| 349 | 349 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 280 | Each | |
| 350 | 350 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make) | 60 | Each | |
| 351 | 351 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 120 | Each | |
| 352 | 352 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt.Sleek Box type luminaries complete with Electronic ballast and plastic holder brackets/ top cover & decorative dual colour end caps with 1 X 36 / 40 watt Fluorescent tube.(Crompton Greaves make) Model- DJB 1314LDB50 / DJBN1314EB CROMTEK with Power Lux Lamp/ DMLUN36EB MIRRORLITE ULTRA SLIM with Super Saver Lamp or equivalent (Equivalent will be selected by the deptt considering the mother items rate) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make. | 400 | Each | |
| 353 | 353 | Supplying with fitting & fixing of the following Street light luminaries complete with lamp in the existing pole including making necessary connection as approved by the Deptt.)with 2 ×1.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the department. Philips make) Type HGS120 2xTL5-54W EBP For lamp 2xTL5-54W.. / Havells make): LHRT05228033 For lamp 2x28W T5 | 15 | Each | |
| 354 | 354 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way TPN (4+12) double door | 10 | Each | |
| 355 | 355 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 40A | 10 | Each | |
| 356 | 356 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) C Series\n(Schneider MG, legrand, Hager make) 6 to 32A | 120 | Each | |
| 357 | 357 | Supplying including fitting and fixing bus bar chamber ( HPL/ GECO / or equivalent make) with 4 strips bus bar of length 350/450/600/900 mm made of aluminium alloy or wrought aluminium suitable for 100 amp capacity complete with all accessories including connection etc. as required complete | 5 | Each | |
| 358 | 358 | Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | 10 | Each | |
| 359 | 359 | Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | 10 | Each | |
| 360 | 360 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | 330 | Metre. | |
| 361 | 361 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 3.5 A2XFY25 Sq.mm 3 and 1/2 core armoured cable | 220 | Metre | |
| 362 | 362 | (5) 2-STORIED RCC BUILDING FOR PRISONERS BARRACK FEMALE CIVIL WORKS:- Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | 405.35 | Sqm | |
| 363 | 363 | Earth work in excavation for foundation trences of walls, retaining walls, footing of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2m below the existing ground level. (a) In ordinary soil. | 405 | Cum | |
| 364 | 364 | (B) Extra over item No. 1.1 (A) above for each 1 m depth or part thereof beyond the initial depth of 2 m. | 25 | Cum | |
| 365 | 365 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering where necessary shall be measured and paid separately). (a) In prop. 1 cement: 3 sand: 6 coarse aggregate by volume. | 35 | Cum | |
| 366 | 366 | (b) In prop. 1 cement: 4 sand: 8 coarse aggregate by volume. | 19 | Cum | |
| 367 | 367 | Providing and laying 25mm thick damp proof coarse with cement concrete in prop. 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 70 | Sqm | |
| 368 | 368 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 105 | Cum | |
| 369 | 369 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 125 | Cum | |
| 370 | 370 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforced concrete and plain concrete work. (A) In sub structure upto plinth level: Foundation, footing, columns with base, tie and plinth beam, pile cape, base slab, retaining walls, walls of septic tank, inspection pit and the like upto plinth level. (i) using 25mm thick plank. | 80 | Sqm | |
| 371 | 371 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M b) using 25mm thick | 180 | Sqm | |
| 372 | 372 | Columns, pillars, posts & strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having palne vertical face. (ii) Using 25 mm thick plank. | 100 | Sqm | |
| 373 | 373 | Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in : (1) Columns, pillars, post and strut of square / rectangular / poligonal in plan or any shape like Tee / L etc. having plain vertical face. | 140 | Sqm | |
| 374 | 374 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M | 140 | Sqm | |
| 375 | 375 | Flat surface such as soffits of suspended floors, roof, landings, cantilever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness | 500 | Sqm | |
| 376 | 376 | Staircase with sloping or stepped soffits including risers and stringers but excluding landing. | 80 | Sqm | |
| 377 | 377 | Providing soling in foundation and under floor at all levels with stone/best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials complete. (a) Brick flat soling | 410 | Sqm | |
| 378 | 378 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In prop. 1:5 | 100 | Cum | |
| 379 | 379 | 112mm thick 1st class brick nogged wall in cement mortar embedded with protruding rod in column including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protruding M.S. rod/ tor steel will be measured and paid separately under relevant item of steel work) (c) In cement mortar in prop. 1:5 | 780 | Sqm | |
| 380 | 380 | Cement concrete works in topping 1:1:2 (1 cement, 1 sand : 2 graded aggregates on RCC floor , tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg of cement per sq m of floor (base concrete to be measured and paid separately) to be laid in panels including curing complete as directed. (b) 20 mm thick. | 400 | Sqm | |
| 381 | 381 | Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 780 | Sqm | |
| 382 | 382 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 501.6 | Sqm | |
| 383 | 383 | 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (b) In cement mortar 1:4 | 600 | Sqm | |
| 384 | 384 | B) On fair side (b) In Cement mortar 1:4 | 300 | Sqm | |
| 385 | 385 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii)Super Ductile (SD) TMT reinforcement bars | 215 | Qntl | |
| 386 | 386 | (c) I.S.I. approved M.S. Rod | 8 | Qntl | |
| 387 | 387 | Providing fitting & fixing steel windows of standard rolled steel sections as per relevant I.S Code,joints mitredand welded with 15mm x 13mm x 100mm lugs embedded in cement concrete block of M- 10 grade including providing and fixing of projecting hinges (not more than 65mm and not less han 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mm x 12mm sqare bars duly welded to steel frame at not more than 120mm c/c applying a priming coat of red-lead paint etc. complete as per drawing a) Openable. | 35 | Sqm | |
| 388 | 388 | Providing fitting & fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S Code, joints mitred and welded with 15mm x 13mm x 100mm lugs emdedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2 nos. of 12mm x 12mm sqare bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing | 12 | Sqm | |
| 389 | 389 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 260 | Kg | |
| 390 | 390 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 22 | Sq.m. | |
| 391 | 391 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 35 | RM | |
| 392 | 392 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100mmx75mmx3.5mm) 6Nos. With necessary wood screws. (b) Non decorative type and block board core. (ii) 35mm thick. | 45 | Sqm | |
| 393 | 393 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished) (A) Sliding door bolts (ii) 250 mm x 16 mm | 24 | Each | |
| 394 | 394 | (B) Tower bolts (iii) 200 mm x 12 mm | 10 | Each | |
| 395 | 395 | (C) Door handles (iii) 150 mm | 10 | Each | |
| 396 | 396 | Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | 75 | Sqm | |
| 397 | 397 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. (ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | 120 | Rm | |
| 398 | 398 | Earth / Sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, Forest Royalty, Sales tax and other duties & taxes as may be necessary. (b) with hill sand obtained by truck carriage including loading and un loading, and carriage to the site of work. | 350 | Cum | |
| 399 | 399 | (c) With river sand or silt (Predominalty non plastic) by truck carriage including loading and unloading. | 80 | Cum | |
| 400 | 400 | Grading roof for water proofing treatment (a) Cement Concrete (i) 1:2:4 | 6.5 | Cum | |
| 401 | 401 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden beadings including necessary cutting of glass to required sizes (payment for wooden beads shall be made separately) (II) Area of glass panes exceeding 0.15 sq.m but not exceeding 0.52 sq.m b) 4.00 mm thick. | 60 | Sqm | |
| 402 | 402 | (c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 720 | Sqm | |
| 403 | 403 | (f) Distempering with dry distemper of approved brand and manufac ture ( two coats) and of reuired shade on new wall surface to give an even shade over and including priming coat of white primer after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing surface even and sand papered smooth. | 720 | Sqm | |
| 404 | 404 | (h) Distempering with dry distemper of approved brand and manufacture (one coat) and of required shade on old wall surface to give an even shade, after throughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing surface even and sand papered smooth. | 720 | Sqm | |
| 405 | 405 | (a) Applying one coat of cement primer of approved brand & manufacture on new wall surface after thoroughly brooming the surface free from mortar droppings & other foreign matter & including preparing the surface even and sand papered smooth. | 380 | Sqm | |
| 406 | 406 | (b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after thoroughly brooming the surfacesto remove all dirt and remains of loose powdered materials. | 380 | Sqm | |
| 407 | 407 | (d) Extra over item No. (b) and (c) for every subsequent coat of water proofing cement paint of pproved brand and manufacture. | 380 | Sqm | |
| 408 | 408 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | 23 | Cum | |
| 409 | 409 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). | 250 | Sqm | |
| 410 | 410 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned in above item (I) 112mm thick brick /R.B wall. | 150 | sqm | |
| 411 | 411 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | 150 | Sqm | |
| 412 | 412 | Providing precast RCC slab in prop. 1:2:4 reinforced with 10 mm TMT/HYSD bars @ 150 mm centre both ways tying with 20 guage black annealed wire with necessary shuttering, curing etc. complete including fixing in position as directed. (a) 100 mm thick slab. | 18 | Sqm | |
| 413 | 413 | Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. (c) Using ordinary cement | 40 | Sqm | |
| 414 | 414 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.(A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate | 80 | Sqm | |
| 415 | 415 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. | 880 | Sqm | |
| 416 | 416 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). a) Normal range Somany/ Orient / Nitco / Asian Make (i) of size 300mmx300mm and above | 40 | Sqm | |
| 417 | 417 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). b) Executive range Somany/ Orient/Nitco/Asian Make i) of size 200mmx300mm and above | 179 | Sqm | |
| 418 | 418 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary land compensation, Municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% duduction for shrinkage to be made from total quantity) etc. complete as directed and specified, including forest royalty within a distance of 8.00 km. (forest royalty shall be reimbursed on production of necessary certificate from the forest authority duly counter signed by D.F.O. concerned). (b) Other than Guwahati city | 100 | Sqm | |
| 419 | 419 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 250.8 | Sqm | |
| 420 | 420 | SANITARY & WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm b) Coloured ii) Hindware make | 2 | Each | |
| 421 | 421 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\nii) Hindware make b) Coloured (i) Sleek+ PVC cistern | 2 | Sqm | |
| 422 | 422 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) :: Basin (without pedestal) (B) Hindware Make (a) White (iii) Viking 550 x 400 (Cat.No.10008) | 2 | Each | |
| 423 | 423 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 2 | Each | |
| 424 | 424 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (ii) Agmeco Make (a) Cubin (Cat. No.CB-00102) | 2 | Each | |
| 425 | 425 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 30 | RM | |
| 426 | 426 | (iv) 75 mm dia | 6 | RM | |
| 427 | 427 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 2 | Each | |
| 428 | 428 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (v) 63mm dia. PVC cowel of ISI make | 2 | Each | |
| 429 | 429 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 6 | Cum | |
| 430 | 430 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 2 | Each | |
| 431 | 431 | Supplying fitting and fixing G.I. pipes of following sizes, with all necessary approved G.I. fitting such as bend, tee, eibow reducer, nipple, plug, long screw fitting H.W. clamps etc. complete at all level including below G.L. as directed and specified. (A) Exposed on walls (d) 25mm dia (i) Using TATA (Medium) | 30 | Rm | |
| 432 | 432 | (ii) Concealed by chiselling or breaking brick wall C.C. / RCC and making good to the damages. (f) 15 mm dia (i) Using Tata (Medium) | 15 | Rm | |
| 433 | 433 | Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) a) Continental (i) Shower arm 190mm long light body with wall flange | 2 | Each | |
| 434 | 434 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified ( G.I. & C.P. pipes will be measured separately) (I) Essco make (Delux/Sumthing spl./Tropical) (b) Long body bib cock with wall flange | 2 | Each | |
| 435 | 435 | Supplying and fitting ball valve as specified and directed. (a) 25mm dia (Gun metal) | 2 | Each | |
| 436 | 436 | Supplying fitting & fixing chrome plated (C.P) stop Cock of approved brand and size as mentioned below a below as directed and specified (G.I & C.P pipes Will be measured and paid separately). (I) Jaquar (a) Continental / Clarion (ii) 15mm dia( Angular stop cock with long thread ) | 2 | Each | |
| 437 | 437 | Supplying fitting & fixing CP pillar cock of 25mm dia of approved brand as specified and directed. (I) Sona make (d) Heavy type | 2 | Each | |
| 438 | 438 | Supplying, fitting and placing in position plastic cylindrical vertical closed top (PCVC) tank of Sintex / Polycon / Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed. (iii) 1000 ltr. (a) Sintex tank | 2 | Each | |
| 439 | 439 | FIRE FIGHTING WORKS\nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 2 | Each | |
| 440 | 440 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 10 | RM | |
| 441 | 441 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 2 | each | |
| 442 | 442 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 2 | Each | |
| 443 | 443 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 2 | Each | |
| 444 | 444 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 2 | Each | |
| 445 | 445 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 2 | Each | |
| 446 | 446 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 10 | Each | |
| 447 | 447 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 10 | Each | |
| 448 | 448 | ELECTRICAL WORKS:\n Wiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Medium point up to 6.00 metre. Length. | 73 | Each | |
| 449 | 449 | Long point up to 10.00 metre. Length. | 105 | Each | |
| 450 | 450 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan.Medium point up to 6.00 metre. Length. | 8 | Each | |
| 451 | 451 | Long point up to 10.00 metre. Length. | 8 | Each | |
| 452 | 452 | Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including providing & fixing 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) earthing the 3rd pin of the socket as required on the switch board in flat ISI marked casing 'n' capping system, when fitted on same board of light and fan. | 40 | Each | |
| 453 | 453 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Long point up to 10.00 metre. Length. | 4 | Each | |
| 454 | 454 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity.\nWith 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system. | 795 | Metre. | |
| 455 | 455 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system. | 635 | Metre. | |
| 456 | 456 | With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system. | 277 | Metre. | |
| 457 | 457 | Supplying and fixing of Call bell ( Buzzer ) including 5/ 6 amp capacity button piano type bell push switch including connection as approved by the Deptt.)as required. | 8 | Each | |
| 458 | 458 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. Premium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make)\n | 56 | Each | |
| 459 | 459 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 56 | Each | |
| 460 | 460 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make) | 12 | Each | |
| 461 | 461 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 24 | Each | |
| 462 | 462 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt.Sleek Box type luminaries complete with Electronic ballast and plastic holder brackets/ top cover & decorative dual colour end caps with 1 X 36 / 40 watt Fluorescent tube.(Crompton Greaves make) Model- DJB 1314LDB50 / DJBN1314EB CROMTEK with Power Lux Lamp/ DMLUN36EB MIRRORLITE ULTRA SLIM with Super Saver Lamp or equivalent (Equivalent will be selected by the deptt considering the mother items rate) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make. | 80 | Each | |
| 463 | 463 | Supplying with fitting & fixing of the following Street light luminaries complete with lamp in the existing pole including making necessary connection as approved by the Deptt.)with 2 ×1.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the department. Philips make) Type HGS120 2xTL5-54W EBP For lamp 2xTL5-54W.. / Havells make): LHRT05228033 For lamp 2x28W T5 | 3 | Each | |
| 464 | 464 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way TPN (4+12) double door | 2 | Each | |
| 465 | 465 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 40A | 2 | Each | |
| 466 | 466 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) C Series\n(Schneider MG, legrand, Hager make) 6 to 32A | 24 | Each | |
| 467 | 467 | Supplying including fitting and fixing bus bar chamber ( HPL/ GECO / or equivalent make) with 4 strips bus bar of length 350/450/600/900 mm made of aluminium alloy or wrought aluminium suitable for 100 amp capacity complete with all accessories including connection etc. as required complete | 1 | Each | |
| 468 | 468 | Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | 2 | Each | |
| 469 | 469 | Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | 2 | Each | |
| 470 | 470 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | 66 | Metre. | |
| 471 | 471 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, unarmoured/Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 laid in air or through existing cable trench/ duct/ cable tray/ HDPE pipe including fitting required size of lugs at the both end of the cable by using crimping tool and making good damaged done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Core - 3.5 A2XFY25 Sq.mm 3 and 1/2 core armoured cable | 44 | Metre | |
| 472 | 472 | (6) ASSAM TYPE GODOWN CIVIL WORKS:-\nJungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm | 1231.37 | Sqm | |
| 473 | 473 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (c) In soft or laminated rock or medium shale | 201 | Cum | |
| 474 | 474 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 400 | Sqm | |
| 475 | 475 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. . | 52 | Qntl | |
| 476 | 476 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 5.26 | Qntl | |
| 477 | 477 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | 30 | Sqm | |
| 478 | 478 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 82 | Sqm | |
| 479 | 479 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 25 | cum | |
| 480 | 480 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 35 | Cum | |
| 481 | 481 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 30 | Cum | |
| 482 | 482 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5. | 50 | Cum | |
| 483 | 483 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. | 240 | Cum | |
| 484 | 484 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | 40 | Cum | |
| 485 | 485 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 73 | RM | |
| 486 | 486 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable | 30 | Sqm | |
| 487 | 487 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | 15 | Sqm | |
| 488 | 488 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 280 | Sqm | |
| 489 | 489 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 31.3 | Sqm | |
| 490 | 490 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 250 | Sqm | |
| 491 | 491 | B) On fair side b) In cement mortar 1:4 | 280 | Sqm | |
| 492 | 492 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 280 | Sqm | |
| 493 | 493 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (i) 9.5mm thick | 300 | Sqm | |
| 494 | 494 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. b) Using other ISI marked approved circular hollow section | 45 | Qntl | |
| 495 | 495 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 420 | Sqm | |
| 496 | 496 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 65 | RM | |
| 497 | 497 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | 150 | RM | |
| 498 | 498 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (ii) 35 mm thick . | 30 | Sqm | |
| 499 | 499 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 32 | Sq.m. | |
| 500 | 500 | Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed. a) M. S. Angles……. | 7 | Qntl | |
| 501 | 501 | b) M. S. Flats……. | 4 | Qntl | |
| 502 | 502 | c) M. S. bolts & nuts……. | 0.55 | Qntl | |
| 503 | 503 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 350 | Sqm | |
| 504 | 504 | g) Distempering with dry distemper of approved brand and manufacture (twocoats) and of required shade on new wall surface to give an even shade,after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. | 350 | Sqm | |
| 505 | 505 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 430 | Sqm | |
| 506 | 506 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 430 | Sqm | |
| 507 | 507 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | 300 | Sqm | |
| 508 | 508 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 300 | Sqm | |
| 509 | 509 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 65 | Sqm | |
| 510 | 510 | (ii).Surfaces up to 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 85 | Sqm | |
| 511 | 511 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts ii) 250mm x 16mm | 5 | Each | |
| 512 | 512 | b) Tower bolts iii) 200mm x 12mm | 10 | Each | |
| 513 | 513 | c) Door handles ii) 100mm | 5 | Each | |
| 514 | 514 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2. (c). 3.00mm thick. | 35.63 | Sqm | |
| 515 | 515 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. a) 100mm thick slab | 8.78 | Sqm | |
| 516 | 516 | b) 75mm thick slab | 1.13 | Sqm | |
| 517 | 517 | Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). (b) 50mm thick | 53.82 | Sqm | |
| 518 | 518 | Pre-cast cement concrete tiles 20 mm thick with aggregate of sizes up to 6 mm laid in floors, treads of steps and landing with 20 mm thick bed of cement mortar in prop. 1:6 (1cement : 6 coarse sand ) joined with neat cement slurry with pigment to match the (c) Any shade or combination of shades using grey cement. | 40.84 | Sqm | |
| 519 | 519 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | 80 | RM | |
| 520 | 520 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city | 150 | Sqm | |
| 521 | 521 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 279 | Sqm | |
| 522 | 522 | FIRE FIGHTING WORKS\nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 1 | Each | |
| 523 | 523 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 5 | RM | |
| 524 | 524 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 1 | each | |
| 525 | 525 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 1 | Each | |
| 526 | 526 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 1 | Each | |
| 527 | 527 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 1 | Each | |
| 528 | 528 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 1 | Each | |
| 529 | 529 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 5 | Each | |
| 530 | 530 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 5 | Each | |
| 531 | 531 | ELECTRICAL WORKS:\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point. (b) Medium point ………………….. | 50 | P/P | |
| 532 | 532 | Ceiling Fan Point. (b) Medium point ………………….. | 16 | P/P | |
| 533 | 533 | Exhust Fan © Long point ………………….. | 5 | P/P | |
| 534 | 534 | Call bell Point Medium point ………………….. | 2 | P/P | |
| 535 | 535 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 16 | P/P | |
| 536 | 536 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Medium point up to 6.00 metre. Length. | 15 | Each | |
| 537 | 537 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete.\nLong point up to 10.00 metre. Length. | 1 | Each | |
| 538 | 538 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 543 | Rm | |
| 539 | 539 | (b) With 2 x 4 sq. mm + 1 x 2.5 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 210 | Rm | |
| 540 | 540 | Supplying and fixing of call bell (Buzzer ) including 5/6 Amp capacity button piano type bell push switch including connection as approved by the dep't.as required. | 2 | Each | |
| 541 | 541 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt.\n Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 16 | Each | |
| 542 | 542 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 16 | Each | |
| 543 | 543 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. \n Trans Air 300 mm sweep (Crompton make) | 5 | Each | |
| 544 | 544 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 14 | Each | |
| 545 | 545 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 40 | Each | |
| 546 | 546 | Supplying with fitting & fixing sheet steel phosphatised, power painted Single door surface mounting MCB DB incorporated with bas-bar, neutral link, earth bar and din rail etc. fitted on wall with grouting nuts & bolts as per reqd. complete with making necessary connection as specified and directed by the deptt. (ABB,Schneider MG,legrand,Hager,Crabtreexpro make) 8 Way SPN Single door | 2 | Each | |
| 547 | 547 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series. (ABB, Schneider MG, legrand, Hager make) 40 A | 2 | Each | |
| 548 | 548 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. 6 A to 32A | 12 | Each | |
| 549 | 549 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 11KV gd aluminium conductor LT armoured U.G. cable laid in ground/partially in air (10% sq mm balance stranded conductor,XLPE insulated,cores laid up PVC tape inner sheathed,Armour(Aluminium for single core up to 70 sq.mm balance aluminium strip,Galvanish for cables up to 2x10 sq.mm 3x10 sq.mm,4x6 sq.mm balance all galvanish steel strip)extruded PVC type ST2 sheathed,650/1100V grade as per IS 7908(part 1) 1988 armoured U.G Cable U.G cable laid in ground/partially in air(as required for termination over ground including excavation of cable treanch up to depth of 75cm,refilling,protective brick covering,sand cushioning etc complete handing of surplus spoil,debris etc to proper place as specified and directed by the deptt.(Nicco / Havells/ RPG / CCI /Polycab/Gloster/ Finolex made or equivalent) 3 & 1/2 Core A2XFY. 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 30 | Metre | |
| 550 | 550 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 551 | 551 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 552 | 552 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 31 | R.m | |
| 553 | 553 | (7) ASSAM TYPE KITCHEN CUM DINING HALL CIVIL WORKS:-\nJungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm | 1233.69 | Sqm | |
| 554 | 554 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below (a) In ordinary soilthe existing ground level. | 449 | Cum | |
| 555 | 555 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | 300 | Cum | |
| 556 | 556 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps,walls,bricks works, etc. as directed and specified including dewatering if necessary and curing complete. In prop 1cement : 4sand : 8coarse aggregate by volume | 10 | Cum | |
| 557 | 557 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. (a) 100 mm thick | 463.68 | Sqm | |
| 558 | 558 | Providing and laying plain/reinforcement cement concrete works cement,coarse sand,& 20mm down graded stone aggregate including dewatering if necessary,and curing complted but exceding cost of form work and reinforcement for reinforcement cement concrete work. (form work and reinforcement will be measured and paid separately) (A) In substructure up to plinth level without using admixture, M20 grade concrete | 68 | Cum | |
| 559 | 559 | (B) In super structure from plinth level up to Roof level. (B) M20 grade concrete | 18 | Cum | |
| 560 | 560 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 76.2 | Sqm | |
| 561 | 561 | Providing form work of ordinary timber planking so as to give a rough finish including centering,shuttering,shuttering and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced and plain cement concrete work in. Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(b) Using 25mm thick plank | 47.1 | Sqm | |
| 562 | 562 | Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank | 205 | Sqm | |
| 563 | 563 | Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (ii) Using 25mm thick plank | 92 | Sqm | |
| 564 | 564 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (ii) Using 25mm thick plank | 78 | Sqm | |
| 565 | 565 | Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 550 | Sqm | |
| 566 | 566 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:5 | 56 | Cum | |
| 567 | 567 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4.\n(1 cement:4 sand) | 901.49 | Sqm | |
| 568 | 568 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side c) In cement mortar 1:5 | 858.56 | Sqm | |
| 569 | 569 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side c) In cement mortar 1:5 | 858.56 | Sqm | |
| 570 | 570 | Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (ii)12.5mm \n\n | 500 | Sqm | |
| 571 | 571 | 18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels. (i) Marwat Slab | 500 | Sqm | |
| 572 | 572 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.45 mm thick | 480 | Sqm | |
| 573 | 573 | Providing Pre Painted Galvalume Sheet (PPGL) accessories ( Ridges / Valley / Gutter / Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) .45 mm thick | 14 | RM | |
| 574 | 574 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | 77.8 | R.M. | |
| 575 | 575 | Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (a) 1.25mm thick sheet (iii) Size 125mm x 60mm (Single rebate) | 49.18 | RM | |
| 576 | 576 | Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.) (a) 30 mm thick | 14.43 | Sq.m. | |
| 577 | 577 | Providing, fitting and fixing steel windows/ ventilators (fixed) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx3mmx100mm lugs embedded in cement concrete block of M-10 grade including applying a coat of red-lead primer. | 40.5 | Sq.m. | |
| 578 | 578 | b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | 1716 | Sqm | |
| 579 | 579 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick | 1717.13 | Sqm | |
| 580 | 580 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | 1717.13 | Sqm | |
| 581 | 581 | Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 | 70 | Qtl | |
| 582 | 582 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | 105 | Rm | |
| 583 | 583 | Supplying fitting & fixing in position reinforcement bars confirming to relevant I.S.Code for RCC work/R.B Walling including straghtining,cleaning,cutting and bending to proper shape and length as per details supplying and binding with 20G annealed black wire and placing in position with proper block,supports,chairs,spacers etc complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)\n (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. . | 130 | Qtl | |
| 584 | 584 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). b) Executive range Somany/ Orient/Nitco/Asian Make i) of size 200mmx300mm and above | 165 | Sqm | |
| 585 | 585 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 500 | Sqm | |
| 586 | 586 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD | 4 | each | |
| 587 | 587 | PROVIDING RUNNING GAS SYSYTEM | 1 | L/S | |
| 588 | 588 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 500 | Sqm | |
| 589 | 589 | SANITARY AND WATER SUPPLY WORKS \nProviding vitreous China wall hang wash basin with CP brass waste coupling of standard pattern, C.P. brass chain with plug, PVC waste pipe including painting of fittings and brackets , cutting and making good the walls and slabs wherever required. (Pillar cock,stop cock, waste coupling are to be paid separately) (B) Hindware Make (a) White (ii) Cute (Cat No. 10053) | 4 | Each | |
| 590 | 590 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 4 | Each | |
| 591 | 591 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaquar Make (a) Continental (Cat.No.ACN-1331N) | 4 | Each | |
| 592 | 592 | Providing, fitting and fixing CP towel ring of Jaquar make complete as specified and directed (b) Sona make (i) Towel ring round (Cat.No.TR-06051) | 4 | Each | |
| 593 | 593 | Providing, fitting and fixing CP Waste Coupling ( half thread HT and Full Thread FT) complete as directed and specified. (b) Sona (i) Rupa 32mm (HT/ FT) (Cat.No.WS-0801) | 4 | Each | |
| 594 | 594 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed C) CPVC pipe with CPVC fittings (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)iii) 25mm (OD) diameter | 250 | RM | |
| 595 | 595 | Supplying, fitting and fixing C.P. bib cock 15 mm dia of approved brand directed and specified. Iv) Agmeco brand (i) Bib Cock without Flange CAT No.CC 00204/CAT No.CN 00204 | 4 | Each | |
| 596 | 596 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately(B) Nirali (iii) Glister Small (Bowl Size - 410 x 330 x 150) Glossy | 1 | Each | |
| 597 | 597 | Supplying and fitting, fixing Chrome plated (CP) stop cock of approved brand of size as mentioned below and directed and specified (G.I. and CP pipes will be measured and paid separately) IV) Sona (a) 15mm dia Stop cock male-female /Angle stop cock | 8 | Each | |
| 598 | 598 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. i) SONA make (b) Heavy type | 4 | Each | |
| 599 | 599 | Supplying, fitting and fixing Chrome Plated (C.P.) divertor of approved brand complete as directed. Jaquar make a)Continental/ Clarion - 4-way divertor for concealed fitting with built in non return valves with divertor handle Cat No.421 | 4 | nos. | |
| 600 | 600 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 4 | Each | |
| 601 | 601 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 4 | Each | |
| 602 | 602 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 5 | Each | |
| 603 | 603 | Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified.(a) 110 mm | 5 | Each | |
| 604 | 604 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.(ii) 110mm dia. PVC cowel of ISI make | 3 | Each | |
| 605 | 605 | Supplying, fitting and fixing CPVC ( Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting including clams at 1.0 m spacing. This include jointing of pipes and fitting with one step CPVC solvent cement and testing of joints, complete at all levels as directed and specified. (B) Concealed pipe with cutting chases & making good the walls ( d) 40 mm nominal outer dia pipes | 250 | RM | |
| 606 | 606 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 5 | Each | |
| 607 | 607 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 4 | Each | |
| 608 | 608 | ELECTRICAL WORKS:\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point. (b) Medium point ………………….. | 75 | P/P | |
| 609 | 609 | Ceiling Fan Point (b) Medium point ………………….. | 28 | P/P | |
| 610 | 610 | Exhust Fan © Long point ………………….. | 12 | P/P | |
| 611 | 611 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 13 | P/P | |
| 612 | 612 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including providing and fixing 5 /6 pin 16 Amps flush type socket outlets and 16 Amps F/T switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) GI / MS switch board ( ISI marked) with phenilic laminated sheet coverincluding earth continuity with 2.5 sq.mm.cable to 3rd pin of the socket .as required complete. \n© Long point. Upto 10.00 m.length | 14 | P/P | |
| 613 | 613 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. \n(a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 921 | Rm | |
| 614 | 614 | (b) With 2 x 4 sq. mm + 1 x 2.5 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 340 | Rm | |
| 615 | 615 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. \nPremium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 28 | Each | |
| 616 | 616 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. \nElectronic Type | 24 | Each | |
| 617 | 617 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. \n Trans Air 300 mm sweep (Crompton make) | 12 | Each | |
| 618 | 618 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 39 | Each | |
| 619 | 619 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. \nSleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 36 | Each | |
| 620 | 620 | Supplying with fitting & fixing sheet steel phosphatised, power painted Single door surface mounting MCB DB incorporated with bas-bar, neutral link, earth bar and din rail etc. fitted on wall with grouting nuts & bolts as per reqd. complete with making necessary connection as specified and directed by the deptt. (ABB,Schneider MG,legrand,Hager,Crabtreexpro make) 6 Way SPN Single door | 6 | Each | |
| 621 | 621 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series. (ABB, Schneider MG, legrand, Hager make) 40 A | 6 | Each | |
| 622 | 622 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series 6 A to 32A | 36 | Each | |
| 623 | 623 | Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.6MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation and brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: 1. 20mm X 3mm 4 strip copper Bus-Bar 0.5M length each2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no4. Pilot Lamp with integral ckt LED 110- 230 V (Red,Yellow, Blue - 3 no5. Voltmeter & Ammeter Selector Switch - 2 no 6. 2 A Slide fuse unit - 3nos. \n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | 1 | Each | |
| 624 | 624 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 63A | 1 | Each | |
| 625 | 625 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 11KV gd aluminium conductor LT armoured U.G. cable laid in ground/partially in air (10% sq mm balance stranded conductor,XLPE insulated,cores laid up PVC tape inner sheathed,Armour(Aluminium for single core up to 70 sq.mm balance aluminium strip,Galvanish for cables up to 2x10 sq.mm 3x10 sq.mm,4x6 sq.mm balance all galvanish steel strip)extruded PVC type ST2 sheathed,650/1100V grade as per IS 7908(part 1) 1988 armoured U.G Cable U.G cable laid in ground/partially in air(as required for termination over ground including excavation of cable treanch up to depth of 75cm,refilling,protective brick covering,sand cushioning etc complete handing of surplus spoil,debris etc to proper place as specified and directed by the deptt.(Nicco / Havells/ RPG / CCI /Polycab/Gloster/ Finolex made or equivalent) 3 & 1/2 Core A2XFY. 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 76 | Metre | |
| 626 | 626 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 627 | 627 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 628 | 628 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 20 | R.m | |
| 629 | 629 | (8) 30 BEDED HOSPITAL (ASSAM TYPE) CIVIL WORKS:-\nJungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm | 2008.75 | Sqm | |
| 630 | 630 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (c) In soft or laminated rock or medium shale | 602.98 | Cum | |
| 631 | 631 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 1000 | Sqm | |
| 632 | 632 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. . | 65 | Qntl | |
| 633 | 633 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 8 | Qntl | |
| 634 | 634 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | 90 | Sqm | |
| 635 | 635 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 246 | Sqm | |
| 636 | 636 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 28 | cum | |
| 637 | 637 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 80 | Cum | |
| 638 | 638 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 70 | Cum | |
| 639 | 639 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5. | 115 | Cum | |
| 640 | 640 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. | 720 | Cum | |
| 641 | 641 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | 120 | Cum | |
| 642 | 642 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 219 | RM | |
| 643 | 643 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable | 80 | Sqm | |
| 644 | 644 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | 35 | Sqm | |
| 645 | 645 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 838 | Sqm | |
| 646 | 646 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 93.9 | Sqm | |
| 647 | 647 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 750 | Sqm | |
| 648 | 648 | B) On fair side b) In cement mortar 1:4 | 840 | Sqm | |
| 649 | 649 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 840 | Sqm | |
| 650 | 650 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (i) 9.5mm thick | 820 | Sqm | |
| 651 | 651 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. b) Using other ISI marked approved circular hollow section | 100 | Qntl | |
| 652 | 652 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 1260 | Sqm | |
| 653 | 653 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 195 | RM | |
| 654 | 654 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | 450 | RM | |
| 655 | 655 | Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (ii)12.5mm \n\n | 837 | Sqm | |
| 656 | 656 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (ii) 35 mm thick . | 85 | Sqm | |
| 657 | 657 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 82 | Sq.m. | |
| 658 | 658 | Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels.(i) 6mm clear glass | 15 | Sq.m. | |
| 659 | 659 | Providing, fitting and fixing anodised aluminium partition walls of standard sections of approved brand, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels.(i)Partly 6mm thick glass panes and 12mm prelaminated ply board | 38 | Sq.m. | |
| 660 | 660 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 816.08 | Sqm | |
| 661 | 661 | Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. (c) Using ordinary cement | 40 | Sqm | |
| 662 | 662 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.(A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate | 80 | Sqm | |
| 663 | 663 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). a) Normal range Somany/ Orient / Nitco / Asian Make (i) of size 300mmx300mm and above | 120 | Sqm | |
| 664 | 664 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). b) Executive range Somany/ Orient/Nitco/Asian Make i) of size 200mmx300mm and above | 179 | Sqm | |
| 665 | 665 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 220 | Kg | |
| 666 | 666 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 1050 | Sqm | |
| 667 | 667 | g) Distempering with dry distemper of approved brand and manufacture (twocoats) and of required shade on new wall surface to give an even shade,after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. | 1050 | Sqm | |
| 668 | 668 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 1290 | Sqm | |
| 669 | 669 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 1290 | Sqm | |
| 670 | 670 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | 900 | Sqm | |
| 671 | 671 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 900 | Sqm | |
| 672 | 672 | (ii).Surfaces up to 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 255 | Sqm | |
| 673 | 673 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts ii) 250mm x 16mm | 15 | Each | |
| 674 | 674 | b) Tower bolts iii) 200mm x 12mm | 30 | Each | |
| 675 | 675 | c) Door handles ii) 100mm | 15 | Each | |
| 676 | 676 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2. (c). 3.00mm thick. | 106.89 | Sqm | |
| 677 | 677 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. a) 100mm thick slab | 26.34 | Sqm | |
| 678 | 678 | b) 75mm thick slab | 3.39 | Sqm | |
| 679 | 679 | Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). (b) 50mm thick | 161.46 | Sqm | |
| 680 | 680 | Pre-cast cement concrete tiles 20 mm thick with aggregate of sizes up to 6 mm laid in floors, treads of steps and landing with 20 mm thick bed of cement mortar in prop. 1:6 (1cement : 6 coarse sand ) joined with neat cement slurry with pigment to match the (c) Any shade or combination of shades using grey cement. | 120.52 | Sqm | |
| 681 | 681 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | 240 | RM | |
| 682 | 682 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city | 450 | Sqm | |
| 683 | 683 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 837 | Sqm | |
| 684 | 684 | CONSTRUCTION OF RCC STAGGING\nEarthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.\n(A) Up to a depth of 2.00m below the existing ground level.\n(c) In soft or laminated rock or medium shale | 6.5 | Cum | |
| 685 | 685 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 5 | Sqm | |
| 686 | 686 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) \na) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars | 12 | Qntl | |
| 687 | 687 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | 2.4 | Sqm | |
| 688 | 688 | Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank | 5.44 | Sqm | |
| 689 | 689 | Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (ii) Using 25mm thick plank | 30.79 | Sqm | |
| 690 | 690 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. (ii) Using 25mm thick plank | 11.56 | Sqm | |
| 691 | 691 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (ii) Using 25mm thick plank | 18.42 | Sqm | |
| 692 | 692 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 4 | Cum | |
| 693 | 693 | (B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\nN) Without using admixture, plasticiser\nb) M15 grade concrete or Prop. 1:2:4 | 5 | Cum | |
| 694 | 694 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5. | 1.62 | Cum | |
| 695 | 695 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. | 1.46 | Cum | |
| 696 | 696 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (b) In cement mortar in proportion 1:5.(1 cement:5 sand) | 11.5 | Sqm | |
| 697 | 697 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. | 4 | Sqm | |
| 698 | 698 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 71.68 | Sqm | |
| 699 | 699 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (iii) 30 mm thick . | 1.8 | Sqm | |
| 700 | 700 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 71.68 | Sqm | |
| 701 | 701 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 5.1 | RM | |
| 702 | 702 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. | 6.24 | Sqm | |
| 703 | 703 | SANITARY & WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm b) Coloured ii) Hindware make | 12 | Each | |
| 704 | 704 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\nii) Hindware make b) Coloured (i) Sleek+ PVC cistern | 12 | Sqm | |
| 705 | 705 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) :: Basin (without pedestal) (B) Hindware Make (a) White (iii) Viking 550 x 400 (Cat.No.10008) | 12 | Each | |
| 706 | 706 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 12 | Each | |
| 707 | 707 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (ii) Agmeco Make (a) Cubin (Cat. No.CB-00102) | 12 | Each | |
| 708 | 708 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 30 | RM | |
| 709 | 709 | (iv) 75 mm dia | 6 | RM | |
| 710 | 710 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 12 | Each | |
| 711 | 711 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (v) 63mm dia. PVC cowel of ISI make | 12 | Each | |
| 712 | 712 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 12 | Cum | |
| 713 | 713 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 12 | Each | |
| 714 | 714 | Supplying fitting and fixing G.I. pipes of following sizes, with all necessary approved G.I. fitting such as bend, tee, eibow reducer, nipple, plug, long screw fitting H.W. clamps etc. complete at all level including below G.L. as directed and specified. (A) Exposed on walls (d) 25mm dia (i) Using TATA (Medium) | 30 | Rm | |
| 715 | 715 | (ii) Concealed by chiselling or breaking brick wall C.C. / RCC and making good to the damages. (f) 15 mm dia (i) Using Tata (Medium) | 15 | Rm | |
| 716 | 716 | Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) a) Continental (i) Shower arm 190mm long light body with wall flange | 12 | Each | |
| 717 | 717 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified ( G.I. & C.P. pipes will be measured separately) (I) Essco make (Delux/Sumthing spl./Tropical) (b) Long body bib cock with wall flange | 12 | Each | |
| 718 | 718 | Supplying and fitting ball valve as specified and directed. (a) 25mm dia (Gun metal) | 12 | Each | |
| 719 | 719 | Supplying fitting & fixing chrome plated (C.P) stop Cock of approved brand and size as mentioned below a below as directed and specified (G.I & C.P pipes Will be measured and paid separately). (I) Jaquar (a) Continental / Clarion (ii) 15mm dia( Angular stop cock with long thread ) | 12 | Each | |
| 720 | 720 | Supplying fitting & fixing CP pillar cock of 25mm dia of approved brand as specified and directed. (I) Sona make (d) Heavy type | 12 | Each | |
| 721 | 721 | Supplying, fitting and placing in position plastic cylindrical vertical closed top (PCVC) tank of Sintex / Polycon / Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed. (iii) 1000 ltr. (a) Sintex tank | 1 | Each | |
| 722 | 722 | EXTERNAL WATER SUPPLY :\nLabour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department .x) Bore hole of 150 mm diameter | 60 | RM | |
| 723 | 723 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.G.I. pipe SUPREME /PRINCE / FUSION /SFMC Brand v) 110mm diameter | 60 | RM | |
| 724 | 724 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe a) TATA / SAIL (Medium)socket should be welded to the pipes. ii) 32mm diameter | 35 | RM | |
| 725 | 725 | Supplying fitting and fixing GI filter 2.00 metre long. | 1 | Each | |
| 726 | 726 | Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained | 1 | Job | |
| 727 | 727 | Flushing, clearing, washing and watering of the tube well | 1 | Job | |
| 728 | 728 | Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materials of various filtration rate per hour of DOLPHIN make with all necessary fittings such as valve,bib cock,pipe connection etc.with a free maintanance period of six months. (A) With Zoloto fittings. (II) 2000 liters capacity (a) 4 mm thick Vessel | 1 | Each | |
| 729 | 729 | Supplying and Installation of 1.5 H.P. Crompton Greaves Single phase Pump Submersible Pump Set including necessary Cable for underground and overground. Panel Board as directed by the Department. | 1 | Each | |
| 730 | 730 | FIRE FIGHTING WORKS\nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 1 | Each | |
| 731 | 731 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 5 | RM | |
| 732 | 732 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 1 | each | |
| 733 | 733 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 1 | Each | |
| 734 | 734 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 1 | Each | |
| 735 | 735 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 1 | Each | |
| 736 | 736 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 1 | Each | |
| 737 | 737 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 5 | Each | |
| 738 | 738 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 5 | Each | |
| 739 | 739 | ELECTRICAL WORKS:\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point (b) Medium point ………………….. | 112 | P/P | |
| 740 | 740 | Ceiling Fan Point (b) Medium point ………………….. | 42 | P/P | |
| 741 | 741 | Exhust Fan © Long point ………………….. | 12 | P/P | |
| 742 | 742 | Call bell Point Medium point ………………….. | 4 | P/P | |
| 743 | 743 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 24 | P/P | |
| 744 | 744 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including providing and fixing 5 /6 pin 16 Amps flush type socket outlets and 16 Amps F/T switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) GI / MS switch board ( ISI marked) with phenilic laminated sheet coverincluding earth continuity with 2.5 sq.mm.cable to 3rd pin of the socket .as required complete. © Long point. Upto 10.00 m.length | 12 | P/P | |
| 745 | 745 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 1452 | Rm | |
| 746 | 746 | (b) With 2 x 4 sq. mm + 1 x 2.5 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 612 | Rm | |
| 747 | 747 | With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in flat 25mm ISI marked casing 'n' capping system. | 452 | Metre. | |
| 748 | 748 | Supplying and fixing of call bell (Buzzer ) including 5/6 Amp capacity button piano type bell push switch including connection as approved by the dep't.as required. | 6 | Each | |
| 749 | 749 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 42 | Each | |
| 750 | 750 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt.Electronic Type | 42 | Each | |
| 751 | 751 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. Trans Air 300 mm sweep (Crompton make) | 12 | Each | |
| 752 | 752 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 35 | Each | |
| 753 | 753 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 73 | Each | |
| 754 | 754 | Supplying with fitting & fixing sheet steel phosphatised, power painted Single door surface mounting MCB DB incorporated with bas-bar, neutral link, earth bar and din rail etc. fitted on wall with grouting nuts & bolts as per reqd. complete with making necessary connection as specified and directed by the deptt. (ABB,Schneider MG,legrand,Hager,Crabtreexpro make) 6 Way SPN Single door | 4 | Each | |
| 755 | 755 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series. (ABB, Schneider MG, legrand, Hager make) 40 A | 4 | Each | |
| 756 | 756 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. \n 6 A to 32A | 25 | Each | |
| 757 | 757 | Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.6MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation and brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:\n1. 20mm X 3mm 4 strip copper Bus-Bar 0.5M length each\n2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no\n3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no\n4. Pilot Lamp with integral ckt LED 110- 230 V (Red,Yellow, Blue - 3 no5. Voltmeter & Ammeter Selector Switch - 2 no\n6. 2 A Slide fuse unit - 3nos\n (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | 1 | Each | |
| 758 | 758 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 63A | 1 | Each | |
| 759 | 759 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 760 | 760 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 761 | 761 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 42 | R.m | |
| 762 | 762 | Philips make) Cat No.SGP 401 1xSONT-150W For Lamp 1xSONT-150W (IP-65) / Crompton Greaves make) SSGN1215H/FG For lamp 1x150W HPSV (T) / Havells: LHBW20115036 For lamp 1x150W SON-T. | 2 | Each | |
| 763 | 763 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 11KV gd aluminium conductor LT armoured U.G. cable laid in ground/partially in air (10% sq mm balance stranded conductor,XLPE insulated,cores laid up PVC tape inner sheathed,Armour(Aluminium for single core up to 70 sq.mm balance aluminium strip,Galvanish for cables up to 2x10 sq.mm 3x10 sq.mm,4x6 sq.mm balance all galvanish steel strip)extruded PVC type ST2 sheathed,650/1100V grade as per IS 7908(part 1) 1988 armoured U.G Cable U.G cable laid in ground/partially in air(as required for termination over ground including excavation of cable treanch up to depth of 75cm,refilling,protective brick covering,sand cushioning etc complete handing of surplus spoil,debris etc to proper place as specified and directed by the deptt.(Nicco / Havells/ RPG / CCI /Polycab/Gloster/ Finolex made or equivalent) 3 & 1/2 Core A2XFY .50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 83 | Rm | |
| 764 | 764 | (9) ASSAM TYPE BUILDING WORK SHED CIVIL WORKS:-\nJungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm | 482 | Sqm | |
| 765 | 765 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (c) In soft or laminated rock or medium shale | 120 | Cum | |
| 766 | 766 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 325 | Sqm | |
| 767 | 767 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. . | 41 | Qntl | |
| 768 | 768 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 6 | Qntl | |
| 769 | 769 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | 30 | Sqm | |
| 770 | 770 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 82 | Sqm | |
| 771 | 771 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 30 | cum | |
| 772 | 772 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 40 | Cum | |
| 773 | 773 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 28 | Cum | |
| 774 | 774 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5. | 40 | Cum | |
| 775 | 775 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. | 220 | Cum | |
| 776 | 776 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | 40 | Cum | |
| 777 | 777 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 73 | RM | |
| 778 | 778 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable | 29 | Sqm | |
| 779 | 779 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | 12 | Sqm | |
| 780 | 780 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 300 | Sqm | |
| 781 | 781 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 35 | Sqm | |
| 782 | 782 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 280 | Sqm | |
| 783 | 783 | B) On fair side b) In cement mortar 1:4 | 220 | Sqm | |
| 784 | 784 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 200 | Sqm | |
| 785 | 785 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (i) 9.5mm thick | 250.8 | Sqm | |
| 786 | 786 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. b) Using other ISI marked approved circular hollow section | 45 | Qntl | |
| 787 | 787 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 420 | Sqm | |
| 788 | 788 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 70 | RM | |
| 789 | 789 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | 120 | RM | |
| 790 | 790 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (ii) 35 mm thick . | 35 | Sqm | |
| 791 | 791 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 380 | Sqm | |
| 792 | 792 | g) Distempering with dry distemper of approved brand and manufacture (twocoats) and of required shade on new wall surface to give an even shade,after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. | 380 | Sqm | |
| 793 | 793 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 422.6 | Sqm | |
| 794 | 794 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 422.6 | Sqm | |
| 795 | 795 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | 281.57 | Sqm | |
| 796 | 796 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 281.57 | Sqm | |
| 797 | 797 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 61.38 | Sqm | |
| 798 | 798 | (ii).Surfaces up to 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 80.62 | Sqm | |
| 799 | 799 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts ii) 250mm x 16mm | 3 | Each | |
| 800 | 800 | b) Tower bolts iii) 200mm x 12mm | 4 | Each | |
| 801 | 801 | c) Door handles ii) 100mm | 4 | Each | |
| 802 | 802 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2. (c). 3.00mm thick. | 35.63 | Sqm | |
| 803 | 803 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. a) 100mm thick slab | 9.78 | Sqm | |
| 804 | 804 | b) 75mm thick slab | 1.13 | Sqm | |
| 805 | 805 | Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). (b) 50mm thick | 53.82 | Sqm | |
| 806 | 806 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | 95 | RM | |
| 807 | 807 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city | 100 | Sqm | |
| 808 | 808 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 250.8 | Sqm | |
| 809 | 809 | SANITARY AND WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm a) White ii) Hindware make | 2 | Each | |
| 810 | 810 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) ii) Hindware make a) White (i) Sleek+ PVC cistern | 2 | Each | |
| 811 | 811 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (B) Hindware Make (a) White (x) Neptune 550 x 460 (Cat. No.10072/11029) | 2 | Each | |
| 812 | 812 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 2 | Each | |
| 813 | 813 | Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (iii) Towel rail Diplomat 600mm long (Cat.No.TR-0605) | 2 | Each | |
| 814 | 814 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051) | 2 | Each | |
| 815 | 815 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 21.4 | RM | |
| 816 | 816 | (iv) 75mm dia. | 15 | RM | |
| 817 | 817 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia. | 4 | Each | |
| 818 | 818 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 4 | Each | |
| 819 | 819 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make | 4 | Each | |
| 820 | 820 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 3.65 | Cum | |
| 821 | 821 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (A) Exposed on walls c) 32 mm dia (Medium) i) Using Tata make | 30 | RM | |
| 822 | 822 | d) 25 mm dia (Medium) i) Using Tata make | 50 | RM | |
| 823 | 823 | f) 15 mm dia (Medium) i) Using Tata make | 20 | RM | |
| 824 | 824 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Essco make (Delux/Sumthing spl./Tropical) (a) Bib cock short body | 4 | Each | |
| 825 | 825 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (v) Essco brand (a) Stop cock 15 mm dia male/female end | 4 | Each | |
| 826 | 826 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (c) New Diplomat/ / Rocket/ Mini Kranti/ Mini Hex shower with arm | 4 | Each | |
| 827 | 827 | FIRE FIGHTING WORKS\nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 1 | Each | |
| 828 | 828 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 5 | RM | |
| 829 | 829 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 1 | each | |
| 830 | 830 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 1 | Each | |
| 831 | 831 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 1 | Each | |
| 832 | 832 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 1 | Each | |
| 833 | 833 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 1 | Each | |
| 834 | 834 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 5 | Each | |
| 835 | 835 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 5 | Each | |
| 836 | 836 | ELECTRICAL WORKS:\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point. (b) Medium point ………………….. | 42 | P/P | |
| 837 | 837 | Ceiling Fan Point. (b) Medium point ………………….. | 16 | P/P | |
| 838 | 838 | Exhust Fan © Long point ………………….. | 7 | P/P | |
| 839 | 839 | Call bell Point Medium point ………………….. | 2 | P/P | |
| 840 | 840 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 16 | P/P | |
| 841 | 841 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Medium point up to 6.00 metre. Length. | 15 | Each | |
| 842 | 842 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete.\nLong point up to 10.00 metre. Length. | 1 | Each | |
| 843 | 843 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 387 | Rm | |
| 844 | 844 | (b) With 2 x 4 sq. mm + 1 x 2.5 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 195 | Rm | |
| 845 | 845 | Supplying and fixing of call bell (Buzzer ) including 5/6 Amp capacity button piano type bell push switch including connection as approved by the dep't.as required. | 2 | Each | |
| 846 | 846 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt.\n Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 16 | Each | |
| 847 | 847 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 16 | Each | |
| 848 | 848 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. \n Trans Air 300 mm sweep (Crompton make) | 7 | Each | |
| 849 | 849 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 11 | Each | |
| 850 | 850 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 35 | Each | |
| 851 | 851 | Supplying with fitting & fixing sheet steel phosphatised, power painted Single door surface mounting MCB DB incorporated with bas-bar, neutral link, earth bar and din rail etc. fitted on wall with grouting nuts & bolts as per reqd. complete with making necessary connection as specified and directed by the deptt. (ABB,Schneider MG,legrand,Hager,Crabtreexpro make) 6 Way SPN Single door | 2 | Each | |
| 852 | 852 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series. (ABB, Schneider MG, legrand, Hager make) 40 A | 2 | Each | |
| 853 | 853 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. 6 A to 32A | 12 | Each | |
| 854 | 854 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 11KV gd aluminium conductor LT armoured U.G. cable laid in ground/partially in air (10% sq mm balance stranded conductor,XLPE insulated,cores laid up PVC tape inner sheathed,Armour(Aluminium for single core up to 70 sq.mm balance aluminium strip,Galvanish for cables up to 2x10 sq.mm 3x10 sq.mm,4x6 sq.mm balance all galvanish steel strip)extruded PVC type ST2 sheathed,650/1100V grade as per IS 7908(part 1) 1988 armoured U.G Cable U.G cable laid in ground/partially in air(as required for termination over ground including excavation of cable treanch up to depth of 75cm,refilling,protective brick covering,sand cushioning etc complete handing of surplus spoil,debris etc to proper place as specified and directed by the deptt.(Nicco / Havells/ RPG / CCI /Polycab/Gloster/ Finolex made or equivalent) 3 & 1/2 Core A2XFY. 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 28 | Metre | |
| 855 | 855 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 856 | 856 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 857 | 857 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 31 | R.m | |
| 858 | 858 | (10) RCC GROUND FLOOR TOILET BLOCK FOR PRISONERS (MALE) CIVIL WORKS:-\nEarth work in Excavation for foundation trenches of walls , Retaining walls, footing of column , steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work , breaking clods in return filling , dressing Watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2 mts. below the existing Ground Level (a) In ordinary Soil | 31.08 | Cum | |
| 859 | 859 | Earth /Sand filling in plinth in layers not more than 150 mm thick including necessary carriage , watering , ramming etc. completed and specified including payment of land compensation , forest royalty , sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | 13.23 | Cum | |
| 860 | 860 | Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 135 | Sqm. | |
| 861 | 861 | Plain cement concrete works with course aggregate of sizes 13mm to 32mm in foundation bed for footing steps, for walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (Shuttering where necessary shall be measured and paid separately) (a) In prop 1cement: 4 sand :8 coarse aggregate by volume | 3.1 | Cum | |
| 862 | 862 | Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code for R.C.C work/ R.B walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports , chairs, spacers etc. complete. (ii) Super Ductile (SD) TMT reinforcement bars | 6 | Qntl. | |
| 863 | 863 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 1.15 | Qtl | |
| 864 | 864 | Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level : Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete | 5.49 | Cum | |
| 865 | 865 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete | 10 | Cum | |
| 866 | 866 | Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for cast - in - situ reinforced concrete and plain concrete work: In Substructure upto Plinth Level : Foundation, footings, base of columns, pile cap, raft and mass concrete works etc. (i) Using 25mm thick plank | 24.05 | Sqm. | |
| 867 | 867 | Sides of tie beams, plinth beams, grade beams etc. at or below plinth level Using 25mm thick plank | 40 | Sqm. | |
| 868 | 868 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in : Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | 21 | Sqm. | |
| 869 | 869 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 45 | Sqm. | |
| 870 | 870 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. | 40 | Sqm. | |
| 871 | 871 | Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (C) In proportion 1:5 | 8.5 | Cum | |
| 872 | 872 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:5. \n | 105 | Sqm. | |
| 873 | 873 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 210 | Sqm. | |
| 874 | 874 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate | 46.05 | Sqm. | |
| 875 | 875 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range \nSomany/ Orient/Nitco/Asian Make ii) Of size 200mmx300mm and above | 222 | Sqm. | |
| 876 | 876 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 145 | RM | |
| 877 | 877 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (iii) 25 mm thick . | 45 | Sqm. | |
| 878 | 878 | Supplying, fitting, fixing electrocoloured iron fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for wood screws including necessary screws etc. complete. b) Tower bolts ii) 250mm x 10mm | 12 | Nos. | |
| 879 | 879 | d) MS door handles ii) 100mm | 12 | Nos. | |
| 880 | 880 | b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | 210 | Sqm. | |
| 881 | 881 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.(a) 15 mm thick | 40 | Sqm. | |
| 882 | 882 | Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished. | 27 | Sqm | |
| 883 | 883 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm. | 45 | Rm | |
| 884 | 884 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 46.08 | Sqm | |
| 885 | 885 | SANITARY AND WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)Indian type Orissa pattern of size 500mma) Whitei) Parryware make | 12 | Nos. | |
| 886 | 886 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)i) Parryware makea) White(viii) Tiger (Cat No.C8260) | 12 | Nos. | |
| 887 | 887 | Providing, fitting and fixing CP towel rail complete as directed and specified.(b) Sona make (i) Towel rail Diplomat 300mm long (Cat.No.TR-0605) | 12 | Nos. | |
| 888 | 888 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 1.05 | Cum | |
| 889 | 889 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 4 | each | |
| 890 | 890 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 12 | RM | |
| 891 | 891 | (vi) 50mm dia | 5 | RM | |
| 892 | 892 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 12 | each | |
| 893 | 893 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 12 | each | |
| 894 | 894 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified.(A) Exposed or in trenchesSUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenchesd) 25 mm dia | 5 | RM | |
| 895 | 895 | f)15 mm dia | 25 | RM | |
| 896 | 896 | (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure.SUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40)f)15 mm dia | 35 | RM | |
| 897 | 897 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Agmeco brand(i) Bib Cock without Flange CAT No.CC 00204/CAT No.CN 00204 | 12 | Each | |
| 898 | 898 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately)I) Brass stop cock (heavy) of Sant make(i)15mm dia | 12 | Each | |
| 899 | 899 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (d) Hammer shower with arm | 12 | Each | |
| 900 | 900 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 Lt capacity (a) Sintex make | 2 | Each | |
| 901 | 901 | ELECTRICAL WORKS:\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point. (b) Medium point ………………….. | 12 | P/P | |
| 902 | 902 | Ceiling Fan Point. (b) Medium point ………………….. | 9 | P/P | |
| 903 | 903 | Exhust Fan (b) Medium point ………………….. | 1 | P/P | |
| 904 | 904 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 3 | P/P | |
| 905 | 905 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 5 pin 6 Amps flush typeplug socket and 6 Amps F/T switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) GI / MS switch board ( ISI marked) with phenilic laminated sheet cover including earth continuity with 1.5 sq.mm.cable to third pin of the plug socket etc.as required complete,when placed elsewhere. \n(b) Medium point ………………….. | 1 | P/P | |
| 906 | 906 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 85 | Rm | |
| 907 | 907 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 9 | Each | |
| 908 | 908 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 9 | Each | |
| 909 | 909 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. High Speed 225 mm sweep (orient make)/Trans Air 225 mm sweep (Crompton make/Ventil Air DX 250 mm sweep Louver type (Havells make) | 1 | Each | |
| 910 | 910 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 4 | Each | |
| 911 | 911 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 9 | Each | |
| 912 | 912 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) \n6 way SPN double door | 1 | Each | |
| 913 | 913 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. 6 A to 32A | 4 | Each | |
| 914 | 914 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series\n(ABB, Schneider MG, legrand, Hager make) 6 to 32A | 1 | Each | |
| 915 | 915 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 916 | 916 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 917 | 917 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 28 | R.m | |
| 918 | 918 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 2 Core A2XWaY A2XFaY. 6.00 Sq.mm 2 Core armoured U.G. cable | 26 | Rm | |
| 919 | 919 | (11) RCC GROUND FLOOR TOILET BLOCK FOR PRISONERS (FEMALE) CIVIL WORKS:-\nEarth work in Excavation for foundation trenches of walls , Retaining walls, footing of column , steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work , breaking clods in return filling , dressing Watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2 mts. below the existing Ground Level (a) In ordinary Soil | 7.8 | Cum | |
| 920 | 920 | Earth /Sand filling in plinth in layers not more than 150 mm thick including necessary carriage , watering , ramming etc. completed and specified including payment of land compensation , forest royalty , sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | 3.31 | Cum | |
| 921 | 921 | Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 33.75 | Sqm. | |
| 922 | 922 | Plain cement concrete works with course aggregate of sizes 13mm to 32mm in foundation bed for footing steps, for walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (Shuttering where necessary shall be measured and paid separately) (a) In prop 1cement: 4 sand :8 coarse aggregate by volume | 0.75 | Cum | |
| 923 | 923 | Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code for R.C.C work/ R.B walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports , chairs, spacers etc. complete. (ii) Super Ductile (SD) TMT reinforcement bars | 1.5 | Qntl. | |
| 924 | 924 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 0.29 | Qtl | |
| 925 | 925 | Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level : Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete | 1.3 | Cum | |
| 926 | 926 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete | 2 | Cum | |
| 927 | 927 | Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering , strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 m and removal of the same for cast - in - situ reinforced concrete and plain concrete work: In Substructure upto Plinth Level : Foundation, footings, base of columns, pile cap, raft and mass concrete works etc. (i) Using 25mm thick plank | 6.01 | Sqm. | |
| 928 | 928 | Sides of tie beams, plinth beams, grade beams etc. at or below plinth level Using 25mm thick plank | 10 | Sqm. | |
| 929 | 929 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in : Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | 5.25 | Sqm. | |
| 930 | 930 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 11.25 | Sqm. | |
| 931 | 931 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. | 10 | Sqm. | |
| 932 | 932 | Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (C) In proportion 1:5 | 1.8 | Cum | |
| 933 | 933 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:5. \n | 24.25 | Sqm. | |
| 934 | 934 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 52.5 | Sqm. | |
| 935 | 935 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate | 11.51 | Sqm. | |
| 936 | 936 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range \nSomany/ Orient/Nitco/Asian Make ii) Of size 200mmx300mm and above | 55.5 | Sqm. | |
| 937 | 937 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 36.25 | RM | |
| 938 | 938 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (iii) 25 mm thick . | 11.25 | Sqm. | |
| 939 | 939 | Supplying, fitting, fixing electrocoloured iron fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for wood screws including necessary screws etc. complete. b) Tower bolts ii) 250mm x 10mm | 3 | Nos. | |
| 940 | 940 | d) MS door handles ii) 100mm | 3 | Nos. | |
| 941 | 941 | b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | 52.5 | Sqm. | |
| 942 | 942 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.(a) 15 mm thick | 10 | Sqm. | |
| 943 | 943 | Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished. | 6.75 | Sqm | |
| 944 | 944 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.i). 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm. | 11.25 | Rm | |
| 945 | 945 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 10.52 | Sqm | |
| 946 | 946 | SANITARY AND WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)Indian type Orissa pattern of size 500mma) Whitei) Parryware make | 3 | Nos. | |
| 947 | 947 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)i) Parryware makea) White(viii) Tiger (Cat No.C8260) | 3 | Nos. | |
| 948 | 948 | Providing, fitting and fixing CP towel rail complete as directed and specified.(b) Sona make (i) Towel rail Diplomat 300mm long (Cat.No.TR-0605) | 3 | Nos. | |
| 949 | 949 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 0.26 | Cum | |
| 950 | 950 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 1 | each | |
| 951 | 951 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 3 | RM | |
| 952 | 952 | (vi) 50mm dia | 1.25 | RM | |
| 953 | 953 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 3 | each | |
| 954 | 954 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 3 | each | |
| 955 | 955 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified.(A) Exposed or in trenchesSUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) Exposed or in trenchesd) 25 mm dia | 1.25 | RM | |
| 956 | 956 | f)15 mm dia | 6.25 | RM | |
| 957 | 957 | (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure.SUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40)f)15 mm dia | 8.75 | RM | |
| 958 | 958 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Agmeco brand(i) Bib Cock without Flange CAT No.CC 00204/CAT No.CN 00204 | 3 | Each | |
| 959 | 959 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately)I) Brass stop cock (heavy) of Sant make(i)15mm dia | 3 | Each | |
| 960 | 960 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (d) Hammer shower with arm | 3 | Each | |
| 961 | 961 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 Lt capacity (a) Sintex make | 1 | Each | |
| 962 | 962 | ELECTRICAL WORKS \nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. \nLight Point (b) Medium point ………………….. | 8 | P/P | |
| 963 | 963 | Exhust Fan (b) Medium point ………………….. | 1 | P/P | |
| 964 | 964 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 1 | P/P | |
| 965 | 965 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 15 | Rm | |
| 966 | 966 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. High Speed 225 mm sweep (orient make)/Trans Air 225 mm sweep (Crompton make/Ventil Air DX 250 mm sweep Louver type (Havells make) | 1 | Each | |
| 967 | 967 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 8 | Each | |
| 968 | 968 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 2 Core A2XWaY A2XFaY. 6.00 Sq.mm 2 Core armoured U.G. cable | 25 | Rm | |
| 969 | 969 | (12) ENCLOSURE WALL FOR PRISONERS BARRACK FOR FEMALE CIVIL WORK:- Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.(A) Up to a depth of 2.00m below the existing ground level.(a) In ordinary soil | 173.3 | Cum | |
| 970 | 970 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(a) Brick on flat soling. | 114.8 | Sqm | |
| 971 | 971 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).(a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 39.03 | cum | |
| 972 | 972 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(b) Using 25mm thick plank | 49.2 | Sqm | |
| 973 | 973 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.(I) In Sub-structure upto plinth level including dewatering if necessary(b) In proportion 1:4. | 162.36 | cum | |
| 974 | 974 | (II) In superstructure above plinth level up to 1st floor level.(b) In proportion 1:4.(1 cement:4 sand) | 221.4 | Cum | |
| 975 | 975 | 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (backing coat 15 mm and finishing coat 5mm thick)b) In cement mortar 1:4 | 565.8 | Sqm | |
| 976 | 976 | B) On fair side (backing coat 10 mm and finishing coat 10mm thick)b) In cement mortar 1:4 | 623.2 | Sqm | |
| 977 | 977 | Extra over item no. 4.1.5 above for brick work in each subsequent floor or part thereof above 1st floor level. | 118.9 | Cum | |
| 978 | 978 | Extra over item no 6.2.1 to 6.2.3 for providing and mixing water proofing materials in cement mortar in prop as recommended by the manufacturer including curing complete as directed.ii) 20 mm thick plasterb) In cement mortar 1:4 | 1189 | Sqm | |
| 979 | 979 | Supplying and applying interior/exterior walls/ floors/ roofs one coat of Epoxy Primer of Jenson & Nicholson/ Nerolac brand as priming coat after cleaning and clearing the surfaces as specified and directed and then applying two coats of Epoxy paints of Jenson & Nicholson/ Nerolac brand of required shade on walls/ floors/ roof surfaces as specified and directed complete including scaffolding at all levels. | 1189 | Sqm | |
| 980 | 980 | Heavy duty iron gate with RCC pillers etc | 1 | EACH | |
| 981 | 981 | (13) ASSAM TYPE JAIL SUPERINTENDENT QUARTER CIVIL WORK:- \nJungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm | 592.63 | Sqm | |
| 982 | 982 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (c) In soft or laminated rock or medium shale | 44 | Cum | |
| 983 | 983 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 122.5 | Sqm | |
| 984 | 984 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. . | 11.5 | Qntl | |
| 985 | 985 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 1.75 | Qntl | |
| 986 | 986 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | 10.75 | Sqm | |
| 987 | 987 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 35 | Sqm | |
| 988 | 988 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like a) Floors etc. upto 200mm in thickness.. | 12.06 | Sqm | |
| 989 | 989 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 8 | cum | |
| 990 | 990 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 10 | Cum | |
| 991 | 991 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 6 | Cum | |
| 992 | 992 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5. | 7 | Cum | |
| 993 | 993 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. | 38 | Cum | |
| 994 | 994 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | 15.47 | Cum | |
| 995 | 995 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 36.5 | RM | |
| 996 | 996 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable | 12.85 | Sqm | |
| 997 | 997 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | 5.27 | Sqm | |
| 998 | 998 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 121 | Sqm | |
| 999 | 999 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 15.65 | Sqm | |
| 1000 | 1000 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 186.03 | Sqm | |
| 1001 | 1001 | B) On fair side b) In cement mortar 1:4 | 186.03 | Sqm | |
| 1002 | 1002 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 115 | Sqm | |
| 1003 | 1003 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 105 | Sqm | |
| 1004 | 1004 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Normal range Somany/ Orient/Nitco /Asian Make Of size 300mmx300mm and above | 28.16 | Sqm | |
| 1005 | 1005 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (i) 9.5mm thick | 100 | Sqm | |
| 1006 | 1006 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. b) Using other ISI marked approved circular hollow section | 5 | Qntl | |
| 1007 | 1007 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 193.45 | Sqm | |
| 1008 | 1008 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 19.68 | RM | |
| 1009 | 1009 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | 53.05 | RM | |
| 1010 | 1010 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (ii) 35 mm thick . | 25 | Sqm | |
| 1011 | 1011 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 161 | Kg | |
| 1012 | 1012 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 15 | Sq.m. | |
| 1013 | 1013 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 162.21 | Sqm | |
| 1014 | 1014 | g) Distempering with dry distemper of approved brand and manufacture (twocoats) and of required shade on new wall surface to give an even shade,after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. | 162.21 | Sqm | |
| 1015 | 1015 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 211.3 | Sqm | |
| 1016 | 1016 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 211.3 | Sqm | |
| 1017 | 1017 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | 140.79 | Sqm | |
| 1018 | 1018 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 140.79 | Sqm | |
| 1019 | 1019 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 30.69 | Sqm | |
| 1020 | 1020 | (ii).Surfaces up to 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 40.39 | Sqm | |
| 1021 | 1021 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts ii) 250mm x 16mm | 1.5 | Each | |
| 1022 | 1022 | b) Tower bolts iii) 200mm x 12mm | 13 | Each | |
| 1023 | 1023 | c) Door handles ii) 100mm | 13 | Each | |
| 1024 | 1024 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2. (c). 3.00mm thick. | 17.82 | Sqm | |
| 1025 | 1025 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. a) 100mm thick slab | 4.39 | Sqm | |
| 1026 | 1026 | b) 75mm thick slab | 0.57 | Sqm | |
| 1027 | 1027 | Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). (b) 50mm thick | 26.91 | Sqm | |
| 1028 | 1028 | Pre-cast cement concrete tiles 20 mm thick with aggregate of sizes up to 6 mm laid in floors, treads of steps and landing with 20 mm thick bed of cement mortar in prop. 1:6 (1cement : 6 coarse sand ) joined with neat cement slurry with pigment to match the (c) Any shade or combination of shades using grey cement. | 18.42 | Sqm | |
| 1029 | 1029 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | 47.5 | RM | |
| 1030 | 1030 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city | 50 | Sqm | |
| 1031 | 1031 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 105 | Sqm | |
| 1032 | 1032 | SANITARY AND WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm a) White ii) Hindware make | 3 | Each | |
| 1033 | 1033 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) ii) Hindware make a) White (i) Sleek+ PVC cistern | 3 | Each | |
| 1034 | 1034 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (B) Hindware Make (a) White (x) Neptune 550 x 460 (Cat. No.10072/11029) | 3 | Each | |
| 1035 | 1035 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (i) Single Bowl with Veg Bowl & Drain Board (400 x 200) Flat Edge- Glossy (Cat.No.C8545) | 1 | Each | |
| 1036 | 1036 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 3 | Each | |
| 1037 | 1037 | Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (iii) Towel rail Diplomat 600mm long (Cat.No.TR-0605) | 3 | Each | |
| 1038 | 1038 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051) | 3 | Each | |
| 1039 | 1039 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 10.7 | RM | |
| 1040 | 1040 | (iv) 75mm dia. | 7.5 | RM | |
| 1041 | 1041 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia. | 3 | Each | |
| 1042 | 1042 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 3 | Each | |
| 1043 | 1043 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make | 2 | Each | |
| 1044 | 1044 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 1.5 | Cum | |
| 1045 | 1045 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (A) Exposed on walls c) 32 mm dia (Medium) i) Using Tata make | 15 | RM | |
| 1046 | 1046 | d) 25 mm dia (Medium) i) Using Tata make | 25 | RM | |
| 1047 | 1047 | f) 15 mm dia (Medium) i) Using Tata make | 10 | RM | |
| 1048 | 1048 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (d) Hammer shower with arm | 3 | Each | |
| 1049 | 1049 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Essco make (Delux/Sumthing spl./Tropical) (a) Bib cock short body | 6 | Each | |
| 1050 | 1050 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (v) Essco brand (a) Stop cock 15 mm dia male/female end | 6 | Each | |
| 1051 | 1051 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (c) New Diplomat/ / Rocket/ Mini Kranti/ Mini Hex shower with arm | 3 | Each | |
| 1052 | 1052 | Supplying, fitting and placing in position plastic cylindrical vertical closed top (PCVC) tank of Sintex / Polycon / Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed. (iii) 1000 ltr. (a) Sintex tank | 1 | Each | |
| 1053 | 1053 | CONSTRUCTION OF RCC STAGGING\nEarthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.\n(A) Up to a depth of 2.00m below the existing ground level.\n(c) In soft or laminated rock or medium shale | 4.28 | Cum | |
| 1054 | 1054 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 4.5 | Sqm | |
| 1055 | 1055 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) \na) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars | 2.5 | Qntl | |
| 1056 | 1056 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | 1.2 | Sqm | |
| 1057 | 1057 | Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank | 2.72 | Sqm | |
| 1058 | 1058 | Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (ii) Using 25mm thick plank | 12 | Sqm | |
| 1059 | 1059 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. (ii) Using 25mm thick plank | 5.78 | Sqm | |
| 1060 | 1060 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (ii) Using 25mm thick plank | 9.21 | Sqm | |
| 1061 | 1061 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 1.05 | Cum | |
| 1062 | 1062 | (B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\nN) Without using admixture, plasticiser\nb) M15 grade concrete or Prop. 1:2:4 | 1.13 | Cum | |
| 1063 | 1063 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5. | 0.5 | Cum | |
| 1064 | 1064 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. | 0.73 | Cum | |
| 1065 | 1065 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (b) In cement mortar in proportion 1:5.(1 cement:5 sand) | 6.2 | Sqm | |
| 1066 | 1066 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. | 2 | Sqm | |
| 1067 | 1067 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 35.84 | Sqm | |
| 1068 | 1068 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (iii) 30 mm thick . | 0.8 | Sqm | |
| 1069 | 1069 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 35.84 | Sqm | |
| 1070 | 1070 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 2.55 | RM | |
| 1071 | 1071 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. | 3.12 | Sqm | |
| 1072 | 1072 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 1 | Each | |
| 1073 | 1073 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 3 | Each | |
| 1074 | 1074 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 3 | Each | |
| 1075 | 1075 | ELECTRICAL WORKS \nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt.\n Light Point. (b) Medium point ………………….. | 25 | P/P | |
| 1076 | 1076 | Ceiling Fan Point. (b) Medium point ………………….. | 12 | P/P | |
| 1077 | 1077 | Exhust Fan. (b) Medium point ………………….. | 1 | P/P | |
| 1078 | 1078 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 6 | P/P | |
| 1079 | 1079 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 5 pin 6 Amps flush typeplug socket and 6 Amps F/T switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) GI / MS switch board ( ISI marked) with phenilic laminated sheet cover including earth continuity with 1.5 sq.mm.cable to third pin of the plug socket etc.as required complete,when placed elsewhere.\n (b) Medium point ………………….. | 9 | P/P | |
| 1080 | 1080 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Medium point up to 6.00 metre. Length. | 1 | P/P | |
| 1081 | 1081 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 50 | Rm | |
| 1082 | 1082 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system. | 20 | Rm | |
| 1083 | 1083 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 12 | Each | |
| 1084 | 1084 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 12 | Each | |
| 1085 | 1085 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. High Speed 225 mm sweep (orient make)/Trans Air 225 mm sweep (Crompton make/Ventil Air DX 250 mm sweep Louver type (Havells make) | 1 | Each | |
| 1086 | 1086 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 11 | Each | |
| 1087 | 1087 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 17 | Each | |
| 1088 | 1088 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) \n6 way SPN double door | 1 | Each | |
| 1089 | 1089 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. 6 A to 32A | 4 | Each | |
| 1090 | 1090 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series\n(ABB, Schneider MG, legrand, Hager make) 6 to 32A | 1 | Each | |
| 1091 | 1091 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 1092 | 1092 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 1093 | 1093 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 23 | R.m | |
| 1094 | 1094 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 2 Core A2XWaY A2XFaY. 6.00 Sq.mm 2 Core armoured U.G. cable | 25 | Rm | |
| 1095 | 1095 | (14) ASSAM TYPE JAILOR'S QUARTER CIVIL WORK:- \nJungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm | 611.28 | Sqm | |
| 1096 | 1096 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (c) In soft or laminated rock or medium shale | 37 | Cum | |
| 1097 | 1097 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 115.85 | Sqm | |
| 1098 | 1098 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. . | 13 | Qntl | |
| 1099 | 1099 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 2 | Qntl | |
| 1100 | 1100 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | 10 | Sqm | |
| 1101 | 1101 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 40 | Sqm | |
| 1102 | 1102 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like a) Floors etc. upto 200mm in thickness.. | 14 | Sqm | |
| 1103 | 1103 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 5 | cum | |
| 1104 | 1104 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 7.85 | Cum | |
| 1105 | 1105 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 4.85 | Cum | |
| 1106 | 1106 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5. | 7.2 | Cum | |
| 1107 | 1107 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. | 45 | Cum | |
| 1108 | 1108 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | 14 | Cum | |
| 1109 | 1109 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 32 | RM | |
| 1110 | 1110 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable | 10.75 | Sqm | |
| 1111 | 1111 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | 4.27 | Sqm | |
| 1112 | 1112 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 97 | Sqm | |
| 1113 | 1113 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 15.65 | Sqm | |
| 1114 | 1114 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 201 | Sqm | |
| 1115 | 1115 | B) On fair side b) In cement mortar 1:4 | 142 | Sqm | |
| 1116 | 1116 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 107 | Sqm | |
| 1117 | 1117 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 99.38 | Sqm | |
| 1118 | 1118 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Normal range Somany/ Orient/Nitco /Asian Make Of size 300mmx300mm and above | 27.36 | Sqm | |
| 1119 | 1119 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (i) 9.5mm thick | 99.38 | Sqm | |
| 1120 | 1120 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. b) Using other ISI marked approved circular hollow section | 5 | Qntl | |
| 1121 | 1121 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 185 | Sqm | |
| 1122 | 1122 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 19.68 | RM | |
| 1123 | 1123 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | 53.05 | RM | |
| 1124 | 1124 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (ii) 35 mm thick . | 22 | Sqm | |
| 1125 | 1125 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 130 | Kg | |
| 1126 | 1126 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 12 | Sq.m. | |
| 1127 | 1127 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 150 | Sqm | |
| 1128 | 1128 | g) Distempering with dry distemper of approved brand and manufacture (twocoats) and of required shade on new wall surface to give an even shade,after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. | 150 | Sqm | |
| 1129 | 1129 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 200 | Sqm | |
| 1130 | 1130 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 200 | Sqm | |
| 1131 | 1131 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 140.79 | Sqm | |
| 1132 | 1132 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 30.69 | Sqm | |
| 1133 | 1133 | (ii).Surfaces up to 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 40.39 | Sqm | |
| 1134 | 1134 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts ii) 250mm x 16mm | 1.5 | Each | |
| 1135 | 1135 | b) Tower bolts iii) 200mm x 12mm | 13 | Each | |
| 1136 | 1136 | c) Door handles ii) 100mm | 13 | Each | |
| 1137 | 1137 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2. (c). 3.00mm thick. | 17.82 | Sqm | |
| 1138 | 1138 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. a) 100mm thick slab | 4.39 | Sqm | |
| 1139 | 1139 | b) 75mm thick slab | 0.57 | Sqm | |
| 1140 | 1140 | Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). (b) 50mm thick | 26.91 | Sqm | |
| 1141 | 1141 | Pre-cast cement concrete tiles 20 mm thick with aggregate of sizes up to 6 mm laid in floors, treads of steps and landing with 20 mm thick bed of cement mortar in prop. 1:6 (1cement : 6 coarse sand ) joined with neat cement slurry with pigment to match the (c) Any shade or combination of shades using grey cement. | 20.42 | Sqm | |
| 1142 | 1142 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | 47.5 | RM | |
| 1143 | 1143 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city | 50 | Sqm | |
| 1144 | 1144 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 99.38 | Sqm | |
| 1145 | 1145 | SANITARY AND WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm a) White ii) Hindware make | 3 | Each | |
| 1146 | 1146 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) ii) Hindware make a) White (i) Sleek+ PVC cistern | 3 | Each | |
| 1147 | 1147 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (B) Hindware Make (a) White (x) Neptune 550 x 460 (Cat. No.10072/11029) | 3 | Each | |
| 1148 | 1148 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (i) Single Bowl with Veg Bowl & Drain Board (400 x 200) Flat Edge- Glossy (Cat.No.C8545) | 1 | Each | |
| 1149 | 1149 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 3 | Each | |
| 1150 | 1150 | Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (iii) Towel rail Diplomat 600mm long (Cat.No.TR-0605) | 3 | Each | |
| 1151 | 1151 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051) | 3 | Each | |
| 1152 | 1152 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 10.7 | RM | |
| 1153 | 1153 | (iv) 75mm dia. | 7.5 | RM | |
| 1154 | 1154 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia. | 3 | Each | |
| 1155 | 1155 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 3 | Each | |
| 1156 | 1156 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make | 2 | Each | |
| 1157 | 1157 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 1.5 | Cum | |
| 1158 | 1158 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (A) Exposed on walls c) 32 mm dia (Medium) i) Using Tata make | 15 | RM | |
| 1159 | 1159 | d) 25 mm dia (Medium) i) Using Tata make | 25 | RM | |
| 1160 | 1160 | f) 15 mm dia (Medium) i) Using Tata make | 10 | RM | |
| 1161 | 1161 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (d) Hammer shower with arm | 3 | Each | |
| 1162 | 1162 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Essco make (Delux/Sumthing spl./Tropical) (a) Bib cock short body | 6 | Each | |
| 1163 | 1163 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (v) Essco brand (a) Stop cock 15 mm dia male/female end | 6 | Each | |
| 1164 | 1164 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (c) New Diplomat/ / Rocket/ Mini Kranti/ Mini Hex shower with arm | 3 | Each | |
| 1165 | 1165 | Supplying, fitting and placing in position plastic cylindrical vertical closed top (PCVC) tank of Sintex / Polycon / Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed. (iii) 1000 ltr. (a) Sintex tank | 1 | Each | |
| 1166 | 1166 | CONSTRUCTION OF RCC STAGGING\nEarthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.\n(A) Up to a depth of 2.00m below the existing ground level.\n(c) In soft or laminated rock or medium shale | 4.28 | Cum | |
| 1167 | 1167 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 4.5 | Sqm | |
| 1168 | 1168 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) \na) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars | 3.5 | Qntl | |
| 1169 | 1169 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | 1.2 | Sqm | |
| 1170 | 1170 | Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank | 2.72 | Sqm | |
| 1171 | 1171 | Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (ii) Using 25mm thick plank | 12 | Sqm | |
| 1172 | 1172 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. (ii) Using 25mm thick plank | 5.78 | Sqm | |
| 1173 | 1173 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (ii) Using 25mm thick plank | 9.21 | Sqm | |
| 1174 | 1174 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 1.05 | Cum | |
| 1175 | 1175 | (B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\nN) Without using admixture, plasticiser\nb) M15 grade concrete or Prop. 1:2:4 | 2.13 | Cum | |
| 1176 | 1176 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5. | 0.81 | Cum | |
| 1177 | 1177 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. | 0.73 | Cum | |
| 1178 | 1178 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (b) In cement mortar in proportion 1:5.(1 cement:5 sand) | 6.2 | Sqm | |
| 1179 | 1179 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. | 2 | Sqm | |
| 1180 | 1180 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 37.5 | Sqm | |
| 1181 | 1181 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (iii) 30 mm thick . | 1.65 | Sqm | |
| 1182 | 1182 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 35.84 | Sqm | |
| 1183 | 1183 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 2.55 | RM | |
| 1184 | 1184 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. | 3.12 | Sqm | |
| 1185 | 1185 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 1 | Each | |
| 1186 | 1186 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 3 | Each | |
| 1187 | 1187 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 3 | Each | |
| 1188 | 1188 | ELECTRICAL WORKS\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt.\n Light Point. (b) Medium point ………………….. | 22 | P/P | |
| 1189 | 1189 | Ceiling Fan Point. (b) Medium point ………………….. | 12 | P/P | |
| 1190 | 1190 | Exhust Fan. (b) Medium point ………………….. | 1 | P/P | |
| 1191 | 1191 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 6 | P/P | |
| 1192 | 1192 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 5 pin 6 Amps flush typeplug socket and 6 Amps F/T switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) GI / MS switch board ( ISI marked) with phenilic laminated sheet cover including earth continuity with 1.5 sq.mm.cable to third pin of the plug socket etc.as required complete,when placed elsewhere.\n (b) Medium point ………………….. | 9 | P/P | |
| 1193 | 1193 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Medium point up to 6.00 metre. Length. | 1 | P/P | |
| 1194 | 1194 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 50 | Rm | |
| 1195 | 1195 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system. | 20 | Rm | |
| 1196 | 1196 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 12 | Each | |
| 1197 | 1197 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 12 | Each | |
| 1198 | 1198 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. High Speed 225 mm sweep (orient make)/Trans Air 225 mm sweep (Crompton make/Ventil Air DX 250 mm sweep Louver type (Havells make) | 1 | Each | |
| 1199 | 1199 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 8 | Each | |
| 1200 | 1200 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 15 | Each | |
| 1201 | 1201 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) \n6 way SPN double door | 1 | Each | |
| 1202 | 1202 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. 6 A to 32A | 4 | Each | |
| 1203 | 1203 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series\n(ABB, Schneider MG, legrand, Hager make) 6 to 32A | 1 | Each | |
| 1204 | 1204 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 1205 | 1205 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 1206 | 1206 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 22 | R.m | |
| 1207 | 1207 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 2 Core A2XWaY A2XFaY. 6.00 Sq.mm 2 Core armoured U.G. cable | 20 | Rm | |
| 1208 | 1208 | (15) ASSAM TYPE MEDICAL OFFICER'S QUARTER CIVIL WORK:- \nJungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm | 592.63 | Sqm | |
| 1209 | 1209 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (c) In soft or laminated rock or medium shale | 44 | Cum | |
| 1210 | 1210 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 122.5 | Sqm | |
| 1211 | 1211 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. . | 11.5 | Qntl | |
| 1212 | 1212 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 1.75 | Qntl | |
| 1213 | 1213 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | 10.75 | Sqm | |
| 1214 | 1214 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 35 | Sqm | |
| 1215 | 1215 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like a) Floors etc. upto 200mm in thickness.. | 12.06 | Sqm | |
| 1216 | 1216 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 8 | cum | |
| 1217 | 1217 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 10 | Cum | |
| 1218 | 1218 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 6 | Cum | |
| 1219 | 1219 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5. | 7 | Cum | |
| 1220 | 1220 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. | 38 | Cum | |
| 1221 | 1221 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | 15.47 | Cum | |
| 1222 | 1222 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 36.5 | RM | |
| 1223 | 1223 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable | 12.85 | Sqm | |
| 1224 | 1224 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | 5.27 | Sqm | |
| 1225 | 1225 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 121 | Sqm | |
| 1226 | 1226 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 15.65 | Sqm | |
| 1227 | 1227 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 186.03 | Sqm | |
| 1228 | 1228 | B) On fair side b) In cement mortar 1:4 | 186.03 | Sqm | |
| 1229 | 1229 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 115 | Sqm | |
| 1230 | 1230 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 105 | Sqm | |
| 1231 | 1231 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Normal range Somany/ Orient/Nitco /Asian Make Of size 300mmx300mm and above | 28.16 | Sqm | |
| 1232 | 1232 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (i) 9.5mm thick | 100 | Sqm | |
| 1233 | 1233 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. b) Using other ISI marked approved circular hollow section | 5 | Qntl | |
| 1234 | 1234 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 193.45 | Sqm | |
| 1235 | 1235 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 19.68 | RM | |
| 1236 | 1236 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | 53.05 | RM | |
| 1237 | 1237 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (ii) 35 mm thick . | 25 | Sqm | |
| 1238 | 1238 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 161 | Kg | |
| 1239 | 1239 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 15 | Sq.m. | |
| 1240 | 1240 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 162.21 | Sqm | |
| 1241 | 1241 | g) Distempering with dry distemper of approved brand and manufacture (twocoats) and of required shade on new wall surface to give an even shade,after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. | 162.21 | Sqm | |
| 1242 | 1242 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 211.3 | Sqm | |
| 1243 | 1243 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 211.3 | Sqm | |
| 1244 | 1244 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | 140.79 | Sqm | |
| 1245 | 1245 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 140.79 | Sqm | |
| 1246 | 1246 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 30.69 | Sqm | |
| 1247 | 1247 | (ii).Surfaces up to 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 40.39 | Sqm | |
| 1248 | 1248 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts ii) 250mm x 16mm | 1.5 | Each | |
| 1249 | 1249 | b) Tower bolts iii) 200mm x 12mm | 13 | Each | |
| 1250 | 1250 | c) Door handles ii) 100mm | 13 | Each | |
| 1251 | 1251 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2. (c). 3.00mm thick. | 17.82 | Sqm | |
| 1252 | 1252 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. a) 100mm thick slab | 4.39 | Sqm | |
| 1253 | 1253 | b) 75mm thick slab | 0.57 | Sqm | |
| 1254 | 1254 | Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). (b) 50mm thick | 26.91 | Sqm | |
| 1255 | 1255 | Pre-cast cement concrete tiles 20 mm thick with aggregate of sizes up to 6 mm laid in floors, treads of steps and landing with 20 mm thick bed of cement mortar in prop. 1:6 (1cement : 6 coarse sand ) joined with neat cement slurry with pigment to match the (c) Any shade or combination of shades using grey cement. | 18.42 | Sqm | |
| 1256 | 1256 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | 47.5 | RM | |
| 1257 | 1257 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city | 50 | Sqm | |
| 1258 | 1258 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 105 | Sqm | |
| 1259 | 1259 | SANITARY AND WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm a) White ii) Hindware make | 3 | Each | |
| 1260 | 1260 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) ii) Hindware make a) White (i) Sleek+ PVC cistern | 3 | Each | |
| 1261 | 1261 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (B) Hindware Make (a) White (x) Neptune 550 x 460 (Cat. No.10072/11029) | 3 | Each | |
| 1262 | 1262 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (i) Single Bowl with Veg Bowl & Drain Board (400 x 200) Flat Edge- Glossy (Cat.No.C8545) | 1 | Each | |
| 1263 | 1263 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 3 | Each | |
| 1264 | 1264 | Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (iii) Towel rail Diplomat 600mm long (Cat.No.TR-0605) | 3 | Each | |
| 1265 | 1265 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051) | 3 | Each | |
| 1266 | 1266 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 10.7 | RM | |
| 1267 | 1267 | (iv) 75mm dia. | 7.5 | RM | |
| 1268 | 1268 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia. | 3 | Each | |
| 1269 | 1269 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 3 | Each | |
| 1270 | 1270 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make | 2 | Each | |
| 1271 | 1271 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 1.5 | Cum | |
| 1272 | 1272 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (A) Exposed on walls c) 32 mm dia (Medium) i) Using Tata make | 15 | RM | |
| 1273 | 1273 | d) 25 mm dia (Medium) i) Using Tata make | 25 | RM | |
| 1274 | 1274 | f) 15 mm dia (Medium) i) Using Tata make | 10 | RM | |
| 1275 | 1275 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (d) Hammer shower with arm | 3 | Each | |
| 1276 | 1276 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Essco make (Delux/Sumthing spl./Tropical) (a) Bib cock short body | 6 | Each | |
| 1277 | 1277 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (v) Essco brand (a) Stop cock 15 mm dia male/female end | 6 | Each | |
| 1278 | 1278 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (c) New Diplomat/ / Rocket/ Mini Kranti/ Mini Hex shower with arm | 3 | Each | |
| 1279 | 1279 | Supplying, fitting and placing in position plastic cylindrical vertical closed top (PCVC) tank of Sintex / Polycon / Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed. (iii) 1000 ltr. (a) Sintex tank | 1 | Each | |
| 1280 | 1280 | CONSTRUCTION OF RCC STAGGING\nEarthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.\n(A) Up to a depth of 2.00m below the existing ground level.\n(c) In soft or laminated rock or medium shale | 4.28 | Cum | |
| 1281 | 1281 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 4.5 | Sqm | |
| 1282 | 1282 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) \na) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars | 2.5 | Qntl | |
| 1283 | 1283 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | 1.2 | Sqm | |
| 1284 | 1284 | Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank | 2.72 | Sqm | |
| 1285 | 1285 | Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (ii) Using 25mm thick plank | 12 | Sqm | |
| 1286 | 1286 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. (ii) Using 25mm thick plank | 5.78 | Sqm | |
| 1287 | 1287 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (ii) Using 25mm thick plank | 9.21 | Sqm | |
| 1288 | 1288 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 1.05 | Cum | |
| 1289 | 1289 | (B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\nN) Without using admixture, plasticiser\nb) M15 grade concrete or Prop. 1:2:4 | 1.13 | Cum | |
| 1290 | 1290 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5. | 0.5 | Cum | |
| 1291 | 1291 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. | 0.73 | Cum | |
| 1292 | 1292 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (b) In cement mortar in proportion 1:5.(1 cement:5 sand) | 6.2 | Sqm | |
| 1293 | 1293 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. | 2 | Sqm | |
| 1294 | 1294 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 35.84 | Sqm | |
| 1295 | 1295 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (iii) 30 mm thick . | 0.8 | Sqm | |
| 1296 | 1296 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 35.84 | Sqm | |
| 1297 | 1297 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 2.55 | RM | |
| 1298 | 1298 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. | 3.12 | Sqm | |
| 1299 | 1299 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 1 | Each | |
| 1300 | 1300 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 3 | Each | |
| 1301 | 1301 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 3 | Each | |
| 1302 | 1302 | ELECTRICAL WORKS\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt.\n Light Point. (b) Medium point ………………….. | 25 | P/P | |
| 1303 | 1303 | Ceiling Fan Point. (b) Medium point ………………….. | 12 | P/P | |
| 1304 | 1304 | Exhust Fan. (b) Medium point ………………….. | 1 | P/P | |
| 1305 | 1305 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 6 | P/P | |
| 1306 | 1306 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 5 pin 6 Amps flush typeplug socket and 6 Amps F/T switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) GI / MS switch board ( ISI marked) with phenilic laminated sheet cover including earth continuity with 1.5 sq.mm.cable to third pin of the plug socket etc.as required complete,when placed elsewhere.\n (b) Medium point ………………….. | 9 | P/P | |
| 1307 | 1307 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Medium point up to 6.00 metre. Length. | 1 | P/P | |
| 1308 | 1308 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 50 | Rm | |
| 1309 | 1309 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system. | 20 | Rm | |
| 1310 | 1310 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 12 | Each | |
| 1311 | 1311 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 12 | Each | |
| 1312 | 1312 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. High Speed 225 mm sweep (orient make)/Trans Air 225 mm sweep (Crompton make/Ventil Air DX 250 mm sweep Louver type (Havells make) | 1 | Each | |
| 1313 | 1313 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 11 | Each | |
| 1314 | 1314 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 17 | Each | |
| 1315 | 1315 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) \n6 way SPN double door | 1 | Each | |
| 1316 | 1316 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. 6 A to 32A | 4 | Each | |
| 1317 | 1317 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series\n(ABB, Schneider MG, legrand, Hager make) 6 to 32A | 1 | Each | |
| 1318 | 1318 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 1319 | 1319 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 1320 | 1320 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 23 | R.m | |
| 1321 | 1321 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 2 Core A2XWaY A2XFaY. 6.00 Sq.mm 2 Core armoured U.G. cable | 25 | Rm | |
| 1322 | 1322 | (16) 2-STORIED RCC RESIDENTIAL BUILDING FOR ASSTT. JAILOR QUARTER-2 UNITS, PHARMACIST-1 UNITS, TECHNICIAN -1 UNIT CIVIL WORK:- \nSurface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | 465.1 | Sqm | |
| 1323 | 1323 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil | 344 | Cum | |
| 1324 | 1324 | Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (a) Upto a depth of 1.5 metre | 236.5 | Sqm | |
| 1325 | 1325 | (b) Above 1.5 m upto 3.00 m depth | 166.64 | Sqm | |
| 1326 | 1326 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 259.88 | Sqm | |
| 1327 | 1327 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 10.49 | Cum | |
| 1328 | 1328 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (i) using 25mm thick plank | 42.47 | Sqm | |
| 1329 | 1329 | Sides of tie beams, grade beams etc. at or below ground level.\n(b) Using 25mm thick plank | 51.93 | Sqm | |
| 1330 | 1330 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | 200.76 | Sqm | |
| 1331 | 1331 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 304.61 | Sqm | |
| 1332 | 1332 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200mm in thickness | 361.57 | Sqm | |
| 1333 | 1333 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. | 15.29 | Sqm | |
| 1334 | 1334 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). | 203.82 | Sqm | |
| 1335 | 1335 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) . (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. b) M20 grade concrete or Prop. 1:1.5:3 | 25 | Cum | |
| 1336 | 1336 | (B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 65 | Cum | |
| 1337 | 1337 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | 18.25 | Cum | |
| 1338 | 1338 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.\n | 25.34 | Cum | |
| 1339 | 1339 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 426 | Sqm | |
| 1340 | 1340 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned in above item\n(a) 112mm thick brick/ R.B wall | 80.88 | Sqm | |
| 1341 | 1341 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 10.02 | Sqm | |
| 1342 | 1342 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.\n(a) With earth or silt or sand obtained by head load with lead upto 90m and lift upto 2m | 60.02 | Cum | |
| 1343 | 1343 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 110.79 | Sqm | |
| 1344 | 1344 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed. (b) 20 mm thick | 159.38 | Sqm | |
| 1345 | 1345 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 30.62 | Sqm | |
| 1346 | 1346 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable | 56 | Sqm | |
| 1347 | 1347 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | 16 | Sqm | |
| 1348 | 1348 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 75.42 | Rm | |
| 1349 | 1349 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core. (ii) 35 mm thick . | 41.25 | Sqm | |
| 1350 | 1350 | Grading roof for water proofing treatment with \n(b) Cement mortar \n(i) 1:3 (1 cement: 3 coarse sand) | 7.76 | Cum | |
| 1351 | 1351 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \n(b) In cement mortar 1:4 | 603.8 | Sqm | |
| 1352 | 1352 | 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete. B) On fair side\n (b) In cement mortar 1:4 | 603.8 | Sqm | |
| 1353 | 1353 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | 455.47 | Sqm | |
| 1354 | 1354 | Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster | 243.85 | Sqm | |
| 1355 | 1355 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. a) On Single coat plaster | 430.3 | Sqm | |
| 1356 | 1356 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. a) On Single coat plaster | 89.55 | Sqm | |
| 1357 | 1357 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (b) 20 mm thick | 140.05 | Sqm | |
| 1358 | 1358 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range \nSomany/ Orient/Nitco/Asian Make ii) Of size 200mmx300mm and above | 63.6 | Sqm | |
| 1359 | 1359 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 328.8 | Sqm | |
| 1360 | 1360 | Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. (a) Using white cement | 3.2 | Sqm | |
| 1361 | 1361 | Providing 0.63 mm thick(24 gauge) galvd plain sheet in valley , lining, flashing etc. and fitted with gavd. Iron J or L hook bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in a positions as directed. | 6.32 | Sqm | |
| 1362 | 1362 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. b) 75mm thick slab | 5.09 | Sqm | |
| 1363 | 1363 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\n(a) Sliding door bolts. \ni) 300mm x 16mm | 28 | Each | |
| 1364 | 1364 | (b) Tower bolts\niii) 200mm x 12mm | 28 | Each | |
| 1365 | 1365 | (c) Door handles\niii) 150mm | 14 | Each | |
| 1366 | 1366 | t) Door stopper with rubber stopper | 8 | Each | |
| 1367 | 1367 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars | 143 | Qtl | |
| 1368 | 1368 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 10 | Qtl | |
| 1369 | 1369 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 250 | Kg | |
| 1370 | 1370 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 30 | Sq.m. | |
| 1371 | 1371 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 1490.5 | Sqm | |
| 1372 | 1372 | b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | 1059.27 | Sqm | |
| 1373 | 1373 | d) Extra over item no. (b) and (c) above for every subsequent coat of water proofing cement paint of approved brand and manufactured. | 1059.27 | Sqm | |
| 1374 | 1374 | e) Extra over item no (b) above for finishing with cement paint on celing and sloping roof. | 455.47 | Sqm | |
| 1375 | 1375 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 430.24 | Sqm | |
| 1376 | 1376 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (a). With ready mixed paint , Wood primer (pink) | 91.07 | Sqm | |
| 1377 | 1377 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 91.07 | Sqm | |
| 1378 | 1378 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed \"red-lead/ red oxide\" primer. | 62.38 | Sqm | |
| 1379 | 1379 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 62.38 | Sqm | |
| 1380 | 1380 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | 94.25 | Sqm | |
| 1381 | 1381 | Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed. | 1200 | Sqm | |
| 1382 | 1382 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (a) Within Guwahati city only | 150 | Cum | |
| 1383 | 1383 | Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | 39.24 | Cum | |
| 1384 | 1384 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | 48.4 | Rm | |
| 1385 | 1385 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (1) Area of glass panes not exceeding 0.15m2 (c). 3.00mm thick. | 61.65 | Sqm | |
| 1386 | 1386 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 164.4 | Sqm | |
| 1387 | 1387 | SANITARY AND WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Vitreous water closet squatting pan (Indian type W.C Orissa pattern) of size 530 x 410 mm \n(a) White i)Hindware make | 4 | Each | |
| 1388 | 1388 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (B) Hindware Make (a) White (vii) Lotus (Cat.No.10013/11019) | 4 | Each | |
| 1389 | 1389 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (viii) Square Plain Small (Bowl Size - 355 x 355 x 180) Glossy | 4 | Each | |
| 1390 | 1390 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 4 | Each | |
| 1391 | 1391 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make (iii) Corner Soap tray (Cat. No.C9949) | 4 | Each | |
| 1392 | 1392 | Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (v) Towel rail Diplomat 900mm long (Cat.No.TR-0605) | 4 | Each | |
| 1393 | 1393 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051) | 4 | Each | |
| 1394 | 1394 | Providing, fitting and fixing Chrome Plated bottle trap pipe complete as directed and specified. (a) Sona make (ii) Pipe for bottle trap 450mm long (Cat. No.BT-0762) | 4 | Each | |
| 1395 | 1395 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 148.6 | Rm | |
| 1396 | 1396 | (iv) 75mm dia. | 77.4 | Rm | |
| 1397 | 1397 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 16 | Each | |
| 1398 | 1398 | (iv) 75 mm dia. | 12 | Each | |
| 1399 | 1399 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 12 | Each | |
| 1400 | 1400 | (iv) 75 mm dia. | 12 | Each | |
| 1401 | 1401 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make | 4 | Each | |
| 1402 | 1402 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 110mm dia. PVC cowel of ISI make | 4 | Each | |
| 1403 | 1403 | Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia | 16 | Each | |
| 1404 | 1404 | (c) 50mm dia | 16 | Each | |
| 1405 | 1405 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 8.1 | Cum | |
| 1406 | 1406 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 4 | Each | |
| 1407 | 1407 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (a) Supreme shower with arm | 4 | Each | |
| 1408 | 1408 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (A) Exposed on walls \na) 50 mm dia (Medium) i) Using Tata make | 49.8 | Rm | |
| 1409 | 1409 | b) 40 mm dia (Medium) i) Using Tata make | 60.5 | Rm | |
| 1410 | 1410 | c) 32 mm dia (Medium) i) Using Tata make | 100.7 | Rm | |
| 1411 | 1411 | d) 25 mm dia (Medium) i) Using Tata make | 108.2 | Rm | |
| 1412 | 1412 | e) 20 mm dia (Medium) i) Using Tata make | 42.4 | Rm | |
| 1413 | 1413 | (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. \nf) 15 mm dia (Medium) i) Using Tata make | 102 | Rm | |
| 1414 | 1414 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) \n1) Essco make (Delux/ Sumthing spl./Tropical) \n(a) Bib cock short body | 12 | Each | |
| 1415 | 1415 | Supplying fitting and fixing polymer stop-cock of Prayag polymer makeof approved size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \n(c) 15mm dia (Concealed type Roman handle) | 12 | Each | |
| 1416 | 1416 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \n(iii) Agmeco (classic) \n(a) Flat | 8 | Each | |
| 1417 | 1417 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.\n(a) 50 mm dia | 2 | Each | |
| 1418 | 1418 | Supplying fitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes. \n(b) 40 mm dia (Heavy duty) | 1 | Each | |
| 1419 | 1419 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes\n1) 2000 litre capacity\nii) Polycon make | 2 | Each | |
| 1420 | 1420 | Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed.\n(a) 2000 litres capacity | 2 | Each | |
| 1421 | 1421 | FIRE FIGHTING WORKS\nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 2 | Each | |
| 1422 | 1422 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 10 | RM | |
| 1423 | 1423 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 2 | each | |
| 1424 | 1424 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 2 | Each | |
| 1425 | 1425 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 2 | Each | |
| 1426 | 1426 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 2 | Each | |
| 1427 | 1427 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 2 | Each | |
| 1428 | 1428 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 10 | Each | |
| 1429 | 1429 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 10 | Each | |
| 1430 | 1430 | ELECTRICAL WORKS\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point. (b) Medium point ………………….. | 85 | P/P | |
| 1431 | 1431 | Ceiling Fan Point (b) Medium point ………………….. | 24 | P/P | |
| 1432 | 1432 | Exhust Fan © Long point ………………….. | 12 | P/P | |
| 1433 | 1433 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 13 | P/P | |
| 1434 | 1434 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including providing and fixing 5 /6 pin 16 Amps flush type socket outlets and 16 Amps F/T switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) GI / MS switch board ( ISI marked) with phenilic laminated sheet coverincluding earth continuity with 2.5 sq.mm.cable to 3rd pin of the socket .as required complete. \n© Long point. Upto 10.00 m.length | 12 | P/P | |
| 1435 | 1435 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. \n(a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 768 | Rm | |
| 1436 | 1436 | (b) With 2 x 4 sq. mm + 1 x 2.5 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 352 | Rm | |
| 1437 | 1437 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. \nPremium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 24 | Each | |
| 1438 | 1438 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. \nElectronic Type | 24 | Each | |
| 1439 | 1439 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. \n Trans Air 300 mm sweep (Crompton make) | 12 | Each | |
| 1440 | 1440 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 33 | Each | |
| 1441 | 1441 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. \nSleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 52 | Each | |
| 1442 | 1442 | Supplying with fitting & fixing sheet steel phosphatised, power painted Single door surface mounting MCB DB incorporated with bas-bar, neutral link, earth bar and din rail etc. fitted on wall with grouting nuts & bolts as per reqd. complete with making necessary connection as specified and directed by the deptt. (ABB,Schneider MG,legrand,Hager,Crabtreexpro make) 6 Way SPN Single door | 6 | Each | |
| 1443 | 1443 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series. (ABB, Schneider MG, legrand, Hager make) 40 A | 6 | Each | |
| 1444 | 1444 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series 6 A to 32A | 36 | Each | |
| 1445 | 1445 | Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.6MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation and brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: 1. 20mm X 3mm 4 strip copper Bus-Bar 0.5M length each2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no4. Pilot Lamp with integral ckt LED 110- 230 V (Red,Yellow, Blue - 3 no5. Voltmeter & Ammeter Selector Switch - 2 no 6. 2 A Slide fuse unit - 3nos. \n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | 1 | Each | |
| 1446 | 1446 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 63A | 1 | Each | |
| 1447 | 1447 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 11KV gd aluminium conductor LT armoured U.G. cable laid in ground/partially in air (10% sq mm balance stranded conductor,XLPE insulated,cores laid up PVC tape inner sheathed,Armour(Aluminium for single core up to 70 sq.mm balance aluminium strip,Galvanish for cables up to 2x10 sq.mm 3x10 sq.mm,4x6 sq.mm balance all galvanish steel strip)extruded PVC type ST2 sheathed,650/1100V grade as per IS 7908(part 1) 1988 armoured U.G Cable U.G cable laid in ground/partially in air(as required for termination over ground including excavation of cable treanch up to depth of 75cm,refilling,protective brick covering,sand cushioning etc complete handing of surplus spoil,debris etc to proper place as specified and directed by the deptt.(Nicco / Havells/ RPG / CCI /Polycab/Gloster/ Finolex made or equivalent) 3 & 1/2 Core A2XFY. 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 80 | Metre | |
| 1448 | 1448 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 1449 | 1449 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 1450 | 1450 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 63 | R.m | |
| 1451 | 1451 | (17) 2-STORIED RCC RESIDENTIAL BUILDING(4 UNITS) FOR CHIEF WARDER, HEAD WARDER (MALE), HEAD WARDER(FEMALE) & L.D. ASSTT. QUARTER CIVIL WORK:- \nSurface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | 346.73 | Sqm | |
| 1452 | 1452 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil | 250 | Cum | |
| 1453 | 1453 | Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (a) Upto a depth of 1.5 metre | 229 | Sqm | |
| 1454 | 1454 | (b) Above 1.5 m upto 3.00 m depth | 150 | Sqm | |
| 1455 | 1455 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 250 | Sqm | |
| 1456 | 1456 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 9.49 | Cum | |
| 1457 | 1457 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (i) using 25mm thick plank | 42.48 | Sqm | |
| 1458 | 1458 | Sides of tie beams, grade beams etc. at or below ground level.\n(b) Using 25mm thick plank | 51.93 | Sqm | |
| 1459 | 1459 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | 200.76 | Sqm | |
| 1460 | 1460 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 304.61 | Sqm | |
| 1461 | 1461 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200mm in thickness | 361.58 | Sqm | |
| 1462 | 1462 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. | 15.29 | Sqm | |
| 1463 | 1463 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). | 203.82 | Sqm | |
| 1464 | 1464 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) . (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. b) M20 grade concrete or Prop. 1:1.5:3 | 18 | Cum | |
| 1465 | 1465 | (B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 28 | Cum | |
| 1466 | 1466 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | 18.25 | Cum | |
| 1467 | 1467 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.\n | 12 | Cum | |
| 1468 | 1468 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 380 | Sqm | |
| 1469 | 1469 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned in above item\n(a) 112mm thick brick/ R.B wall | 80.88 | Sqm | |
| 1470 | 1470 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 10.02 | Sqm | |
| 1471 | 1471 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.\n(a) With earth or silt or sand obtained by head load with lead upto 90m and lift upto 2m | 60.02 | Cum | |
| 1472 | 1472 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 100 | Sqm | |
| 1473 | 1473 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed. (b) 20 mm thick | 148 | Sqm | |
| 1474 | 1474 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 30.62 | Sqm | |
| 1475 | 1475 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable | 20 | Sqm | |
| 1476 | 1476 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | 12 | Sqm | |
| 1477 | 1477 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 75.42 | Rm | |
| 1478 | 1478 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core. (ii) 35 mm thick . | 18 | Sqm | |
| 1479 | 1479 | Grading roof for water proofing treatment with \n(b) Cement mortar \n(i) 1:3 (1 cement: 3 coarse sand) | 4.65 | Cum | |
| 1480 | 1480 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \n(b) In cement mortar 1:4 | 503 | Sqm | |
| 1481 | 1481 | 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete. B) On fair side\n (b) In cement mortar 1:4 | 503 | Sqm | |
| 1482 | 1482 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | 455.47 | Sqm | |
| 1483 | 1483 | Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster | 243.85 | Sqm | |
| 1484 | 1484 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. a) On Single coat plaster | 430.3 | Sqm | |
| 1485 | 1485 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. a) On Single coat plaster | 89.55 | Sqm | |
| 1486 | 1486 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (b) 20 mm thick | 140.05 | Sqm | |
| 1487 | 1487 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range \nSomany/ Orient/Nitco/Asian Make ii) Of size 200mmx300mm and above | 62.64 | Sqm | |
| 1488 | 1488 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 258.8 | Sqm | |
| 1489 | 1489 | Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. (a) Using white cement | 2.5 | Sqm | |
| 1490 | 1490 | Providing 0.63 mm thick(24 gauge) galvd plain sheet in valley , lining, flashing etc. and fitted with gavd. Iron J or L hook bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in a positions as directed. | 6.32 | Sqm | |
| 1491 | 1491 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. b) 75mm thick slab | 5.09 | Sqm | |
| 1492 | 1492 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\n(a) Sliding door bolts. \ni) 300mm x 16mm | 28 | Each | |
| 1493 | 1493 | (b) Tower bolts\niii) 200mm x 12mm | 25 | Each | |
| 1494 | 1494 | (c) Door handles\niii) 150mm | 10 | Each | |
| 1495 | 1495 | t) Door stopper with rubber stopper | 8 | Each | |
| 1496 | 1496 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars | 116 | Qtl | |
| 1497 | 1497 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 8 | Qtl | |
| 1498 | 1498 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 200 | Kg | |
| 1499 | 1499 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 14 | Sq.m. | |
| 1500 | 1500 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 1150 | Sqm | |
| 1501 | 1501 | b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | 1150 | Sqm | |
| 1502 | 1502 | d) Extra over item no. (b) and (c) above for every subsequent coat of water proofing cement paint of approved brand and manufactured. | 1150 | Sqm | |
| 1503 | 1503 | e) Extra over item no (b) above for finishing with cement paint on celing and sloping roof. | 455.47 | Sqm | |
| 1504 | 1504 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 430.24 | Sqm | |
| 1505 | 1505 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (a). With ready mixed paint , Wood primer (pink) | 91.07 | Sqm | |
| 1506 | 1506 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 91.07 | Sqm | |
| 1507 | 1507 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed \"red-lead/ red oxide\" primer. | 62.38 | Sqm | |
| 1508 | 1508 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 62.38 | Sqm | |
| 1509 | 1509 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | 94.25 | Sqm | |
| 1510 | 1510 | Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed. | 1200 | Sqm | |
| 1511 | 1511 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (a) Within Guwahati city only | 150 | Cum | |
| 1512 | 1512 | Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | 39.24 | Cum | |
| 1513 | 1513 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | 48.4 | Rm | |
| 1514 | 1514 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (1) Area of glass panes not exceeding 0.15m2 (c). 3.00mm thick. | 61.65 | Sqm | |
| 1515 | 1515 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 129.4 | Sqm | |
| 1516 | 1516 | SANITARY AND WATER SUPPLY WORK\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Vitreous water closet squatting pan (Indian type W.C Orissa pattern) of size 530 x 410 mm \n(a) White i)Hindware make | 4 | Each | |
| 1517 | 1517 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (B) Hindware Make (a) White (vii) Lotus (Cat.No.10013/11019) | 4 | Each | |
| 1518 | 1518 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (viii) Square Plain Small (Bowl Size - 355 x 355 x 180) Glossy | 4 | Each | |
| 1519 | 1519 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 4 | Each | |
| 1520 | 1520 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make (iii) Corner Soap tray (Cat. No.C9949) | 4 | Each | |
| 1521 | 1521 | Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (v) Towel rail Diplomat 900mm long (Cat.No.TR-0605) | 4 | Each | |
| 1522 | 1522 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051) | 4 | Each | |
| 1523 | 1523 | Providing, fitting and fixing Chrome Plated bottle trap pipe complete as directed and specified. (a) Sona make (ii) Pipe for bottle trap 450mm long (Cat. No.BT-0762) | 4 | Each | |
| 1524 | 1524 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 140 | Rm | |
| 1525 | 1525 | (iv) 75mm dia. | 70 | Rm | |
| 1526 | 1526 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 16 | Each | |
| 1527 | 1527 | (iv) 75 mm dia. | 12 | Each | |
| 1528 | 1528 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 12 | Each | |
| 1529 | 1529 | (iv) 75 mm dia. | 12 | Each | |
| 1530 | 1530 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make | 4 | Each | |
| 1531 | 1531 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 110mm dia. PVC cowel of ISI make | 4 | Each | |
| 1532 | 1532 | Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia | 16 | Each | |
| 1533 | 1533 | (c) 50mm dia | 16 | Each | |
| 1534 | 1534 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 8.1 | Cum | |
| 1535 | 1535 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 4 | Each | |
| 1536 | 1536 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (a) Supreme shower with arm | 4 | Each | |
| 1537 | 1537 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (A) Exposed on walls \na) 50 mm dia (Medium) i) Using Tata make | 49.8 | Rm | |
| 1538 | 1538 | b) 40 mm dia (Medium) i) Using Tata make | 60.5 | Rm | |
| 1539 | 1539 | c) 32 mm dia (Medium) i) Using Tata make | 100.7 | Rm | |
| 1540 | 1540 | d) 25 mm dia (Medium) i) Using Tata make | 108.2 | Rm | |
| 1541 | 1541 | e) 20 mm dia (Medium) i) Using Tata make | 42.4 | Rm | |
| 1542 | 1542 | (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. \nf) 15 mm dia (Medium) i) Using Tata make | 102 | Rm | |
| 1543 | 1543 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) \n1) Essco make (Delux/ Sumthing spl./Tropical) \n(a) Bib cock short body | 12 | Each | |
| 1544 | 1544 | Supplying fitting and fixing polymer stop-cock of Prayag polymer makeof approved size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \n(c) 15mm dia (Concealed type Roman handle) | 12 | Each | |
| 1545 | 1545 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \n(iii) Agmeco (classic) \n(a) Flat | 8 | Each | |
| 1546 | 1546 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.\n(a) 50 mm dia | 2 | Each | |
| 1547 | 1547 | Supplying fitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes. \n(b) 40 mm dia (Heavy duty) | 1 | Each | |
| 1548 | 1548 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes\n1) 2000 litre capacity\nii) Polycon make | 2 | Each | |
| 1549 | 1549 | Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed.\n(a) 2000 litres capacity | 2 | Each | |
| 1550 | 1550 | FIRE FIGHTING WORKS\nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 2 | Each | |
| 1551 | 1551 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 10 | RM | |
| 1552 | 1552 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 2 | each | |
| 1553 | 1553 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 2 | Each | |
| 1554 | 1554 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 2 | Each | |
| 1555 | 1555 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 2 | Each | |
| 1556 | 1556 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 2 | Each | |
| 1557 | 1557 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 10 | Each | |
| 1558 | 1558 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 10 | Each | |
| 1559 | 1559 | ELECTRICAL WORKS\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point. (b) Medium point ………………….. | 70 | P/P | |
| 1560 | 1560 | Ceiling Fan Point (b) Medium point ………………….. | 20 | P/P | |
| 1561 | 1561 | Exhust Fan © Long point ………………….. | 8 | P/P | |
| 1562 | 1562 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 13 | P/P | |
| 1563 | 1563 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including providing and fixing 5 /6 pin 16 Amps flush type socket outlets and 16 Amps F/T switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) GI / MS switch board ( ISI marked) with phenilic laminated sheet coverincluding earth continuity with 2.5 sq.mm.cable to 3rd pin of the socket .as required complete. \n© Long point. Upto 10.00 m.length | 12 | P/P | |
| 1564 | 1564 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. \n(a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 542 | Rm | |
| 1565 | 1565 | (b) With 2 x 4 sq. mm + 1 x 2.5 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 285 | Rm | |
| 1566 | 1566 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. \nPremium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 20 | Each | |
| 1567 | 1567 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. \nElectronic Type | 20 | Each | |
| 1568 | 1568 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. \n Trans Air 300 mm sweep (Crompton make) | 8 | Each | |
| 1569 | 1569 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 25 | Each | |
| 1570 | 1570 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. \nSleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 45 | Each | |
| 1571 | 1571 | Supplying with fitting & fixing sheet steel phosphatised, power painted Single door surface mounting MCB DB incorporated with bas-bar, neutral link, earth bar and din rail etc. fitted on wall with grouting nuts & bolts as per reqd. complete with making necessary connection as specified and directed by the deptt. (ABB,Schneider MG,legrand,Hager,Crabtreexpro make) 6 Way SPN Single door | 6 | Each | |
| 1572 | 1572 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series. (ABB, Schneider MG, legrand, Hager make) 40 A | 6 | Each | |
| 1573 | 1573 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series 6 A to 32A | 36 | Each | |
| 1574 | 1574 | Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.6MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation and brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: 1. 20mm X 3mm 4 strip copper Bus-Bar 0.5M length each2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no4. Pilot Lamp with integral ckt LED 110- 230 V (Red,Yellow, Blue - 3 no5. Voltmeter & Ammeter Selector Switch - 2 no 6. 2 A Slide fuse unit - 3nos. \n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | 1 | Each | |
| 1575 | 1575 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 63A | 1 | Each | |
| 1576 | 1576 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 11KV gd aluminium conductor LT armoured U.G. cable laid in ground/partially in air (10% sq mm balance stranded conductor,XLPE insulated,cores laid up PVC tape inner sheathed,Armour(Aluminium for single core up to 70 sq.mm balance aluminium strip,Galvanish for cables up to 2x10 sq.mm 3x10 sq.mm,4x6 sq.mm balance all galvanish steel strip)extruded PVC type ST2 sheathed,650/1100V grade as per IS 7908(part 1) 1988 armoured U.G Cable U.G cable laid in ground/partially in air(as required for termination over ground including excavation of cable treanch up to depth of 75cm,refilling,protective brick covering,sand cushioning etc complete handing of surplus spoil,debris etc to proper place as specified and directed by the deptt.(Nicco / Havells/ RPG / CCI /Polycab/Gloster/ Finolex made or equivalent) 3 & 1/2 Core A2XFY. 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 46 | Metre | |
| 1577 | 1577 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 1578 | 1578 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 1579 | 1579 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 38 | R.m | |
| 1580 | 1580 | (18) 2-STORIED RCC RESIDENTIAL BUILDING(4 UNITS) FOR MARRIED WARDER QUARTER (3 NOS.) CIVIL WORK:- \nSurface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | 1136.76 | Sqm | |
| 1581 | 1581 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil | 771 | Cum | |
| 1582 | 1582 | Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (a) Upto a depth of 1.5 metre | 696 | Sqm | |
| 1583 | 1583 | (b) Above 1.5 m upto 3.00 m depth | 450 | Sqm | |
| 1584 | 1584 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 660 | Sqm | |
| 1585 | 1585 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 21.15 | Cum | |
| 1586 | 1586 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (i) using 25mm thick plank | 114 | Sqm | |
| 1587 | 1587 | Sides of tie beams, grade beams etc. at or below ground level.\n(b) Using 25mm thick plank | 153 | Sqm | |
| 1588 | 1588 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | 600 | Sqm | |
| 1589 | 1589 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 900 | Sqm | |
| 1590 | 1590 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200mm in thickness | 1050 | Sqm | |
| 1591 | 1591 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. | 45 | Sqm | |
| 1592 | 1592 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). | 600 | Sqm | |
| 1593 | 1593 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) . (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. b) M20 grade concrete or Prop. 1:1.5:3 | 30 | Cum | |
| 1594 | 1594 | (B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 60 | Cum | |
| 1595 | 1595 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | 45 | Cum | |
| 1596 | 1596 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.\n | 24 | Cum | |
| 1597 | 1597 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 960 | Sqm | |
| 1598 | 1598 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned in above item\n(a) 112mm thick brick/ R.B wall | 210 | Sqm | |
| 1599 | 1599 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 30 | Sqm | |
| 1600 | 1600 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.\n(a) With earth or silt or sand obtained by head load with lead upto 90m and lift upto 2m | 180 | Cum | |
| 1601 | 1601 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 300 | Sqm | |
| 1602 | 1602 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed. (b) 20 mm thick | 444 | Sqm | |
| 1603 | 1603 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 91.86 | Sqm | |
| 1604 | 1604 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable | 45 | Sqm | |
| 1605 | 1605 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | 24 | Sqm | |
| 1606 | 1606 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 225 | Rm | |
| 1607 | 1607 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core. (ii) 35 mm thick . | 30 | Sqm | |
| 1608 | 1608 | Grading roof for water proofing treatment with \n(b) Cement mortar \n(i) 1:3 (1 cement: 3 coarse sand) | 7.95 | Cum | |
| 1609 | 1609 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \n(b) In cement mortar 1:4 | 1500 | Sqm | |
| 1610 | 1610 | 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete. B) On fair side\n (b) In cement mortar 1:4 | 1500 | Sqm | |
| 1611 | 1611 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | 1366.41 | Sqm | |
| 1612 | 1612 | Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster | 731.55 | Sqm | |
| 1613 | 1613 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. a) On Single coat plaster | 1290.9 | Sqm | |
| 1614 | 1614 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. a) On Single coat plaster | 268.65 | Sqm | |
| 1615 | 1615 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (b) 20 mm thick | 420.15 | Sqm | |
| 1616 | 1616 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range \nSomany/ Orient/Nitco/Asian Make ii) Of size 200mmx300mm and above | 177.12 | Sqm | |
| 1617 | 1617 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 631.8 | Sqm | |
| 1618 | 1618 | Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. (a) Using white cement | 7.5 | Sqm | |
| 1619 | 1619 | Providing 0.63 mm thick(24 gauge) galvd plain sheet in valley , lining, flashing etc. and fitted with gavd. Iron J or L hook bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in a positions as directed. | 21.96 | Sqm | |
| 1620 | 1620 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. b) 75mm thick slab | 15.27 | Sqm | |
| 1621 | 1621 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\n(a) Sliding door bolts. \ni) 300mm x 16mm | 84 | Each | |
| 1622 | 1622 | (b) Tower bolts\niii) 200mm x 12mm | 75 | Each | |
| 1623 | 1623 | (c) Door handles\niii) 150mm | 30 | Each | |
| 1624 | 1624 | t) Door stopper with rubber stopper | 24 | Each | |
| 1625 | 1625 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars | 213 | Qtl | |
| 1626 | 1626 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 7.5 | Qtl | |
| 1627 | 1627 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 600 | Kg | |
| 1628 | 1628 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 33 | Sq.m. | |
| 1629 | 1629 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 3150 | Sqm | |
| 1630 | 1630 | b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | 3150 | Sqm | |
| 1631 | 1631 | d) Extra over item no. (b) and (c) above for every subsequent coat of water proofing cement paint of approved brand and manufactured. | 3150 | Sqm | |
| 1632 | 1632 | e) Extra over item no (b) above for finishing with cement paint on celing and sloping roof. | 1260 | Sqm | |
| 1633 | 1633 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 1260 | Sqm | |
| 1634 | 1634 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (a). With ready mixed paint , Wood primer (pink) | 255 | Sqm | |
| 1635 | 1635 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 255 | Sqm | |
| 1636 | 1636 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed \"red-lead/ red oxide\" primer. | 174 | Sqm | |
| 1637 | 1637 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 174 | Sqm | |
| 1638 | 1638 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | 255 | Sqm | |
| 1639 | 1639 | Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed. | 3150 | Sqm | |
| 1640 | 1640 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (a) Within Guwahati city only | 360 | Cum | |
| 1641 | 1641 | Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | 117.72 | Cum | |
| 1642 | 1642 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | 145.2 | Rm | |
| 1643 | 1643 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (1) Area of glass panes not exceeding 0.15m2 (c). 3.00mm thick. | 184.95 | Sqm | |
| 1644 | 1644 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 315.9 | Sqm | |
| 1645 | 1645 | SANITARY AND WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Vitreous water closet squatting pan (Indian type W.C Orissa pattern) of size 530 x 410 mm \n(a) White i)Hindware make | 12 | Each | |
| 1646 | 1646 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (B) Hindware Make (a) White (vii) Lotus (Cat.No.10013/11019) | 12 | Each | |
| 1647 | 1647 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (viii) Square Plain Small (Bowl Size - 355 x 355 x 180) Glossy | 12 | Each | |
| 1648 | 1648 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 12 | Each | |
| 1649 | 1649 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make (iii) Corner Soap tray (Cat. No.C9949) | 12 | Each | |
| 1650 | 1650 | Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (v) Towel rail Diplomat 900mm long (Cat.No.TR-0605) | 12 | Each | |
| 1651 | 1651 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051) | 12 | Each | |
| 1652 | 1652 | Providing, fitting and fixing Chrome Plated bottle trap pipe complete as directed and specified. (a) Sona make (ii) Pipe for bottle trap 450mm long (Cat. No.BT-0762) | 12 | Each | |
| 1653 | 1653 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 420 | Rm | |
| 1654 | 1654 | (iv) 75mm dia. | 210 | Rm | |
| 1655 | 1655 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 48 | Each | |
| 1656 | 1656 | (iv) 75 mm dia. | 36 | Each | |
| 1657 | 1657 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 36 | Each | |
| 1658 | 1658 | (iv) 75 mm dia. | 36 | Each | |
| 1659 | 1659 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make | 12 | Each | |
| 1660 | 1660 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 110mm dia. PVC cowel of ISI make | 12 | Each | |
| 1661 | 1661 | Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia | 48 | Each | |
| 1662 | 1662 | (c) 50mm dia | 48 | Each | |
| 1663 | 1663 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 24.3 | Cum | |
| 1664 | 1664 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 12 | Each | |
| 1665 | 1665 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (a) Supreme shower with arm | 12 | Each | |
| 1666 | 1666 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (A) Exposed on walls \na) 50 mm dia (Medium) i) Using Tata make | 149.4 | Rm | |
| 1667 | 1667 | b) 40 mm dia (Medium) i) Using Tata make | 181.5 | Rm | |
| 1668 | 1668 | c) 32 mm dia (Medium) i) Using Tata make | 302.1 | Rm | |
| 1669 | 1669 | d) 25 mm dia (Medium) i) Using Tata make | 324.6 | Rm | |
| 1670 | 1670 | e) 20 mm dia (Medium) i) Using Tata make | 127.2 | Rm | |
| 1671 | 1671 | (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. \nf) 15 mm dia (Medium) i) Using Tata make | 306 | Rm | |
| 1672 | 1672 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) \n1) Essco make (Delux/ Sumthing spl./Tropical) \n(a) Bib cock short body | 36 | Each | |
| 1673 | 1673 | Supplying fitting and fixing polymer stop-cock of Prayag polymer makeof approved size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \n(c) 15mm dia (Concealed type Roman handle) | 36 | Each | |
| 1674 | 1674 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \n(iii) Agmeco (classic) \n(a) Flat | 24 | Each | |
| 1675 | 1675 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.\n(a) 50 mm dia | 6 | Each | |
| 1676 | 1676 | Supplying fitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes. \n(b) 40 mm dia (Heavy duty) | 3 | Each | |
| 1677 | 1677 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes\n1) 2000 litre capacity\nii) Polycon make | 6 | Each | |
| 1678 | 1678 | Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed.\n(a) 2000 litres capacity | 6 | Each | |
| 1679 | 1679 | FIRE FIGHTING WORKS\nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 6 | Each | |
| 1680 | 1680 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 30 | RM | |
| 1681 | 1681 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 6 | each | |
| 1682 | 1682 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 6 | Each | |
| 1683 | 1683 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 6 | Each | |
| 1684 | 1684 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 6 | Each | |
| 1685 | 1685 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 6 | Each | |
| 1686 | 1686 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 30 | Each | |
| 1687 | 1687 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 30 | Each | |
| 1688 | 1688 | ELECTRICAL WORKS\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point. (b) Medium point ………………….. | 60 | each | |
| 1689 | 1689 | © Long point ………………….. | 35 | each | |
| 1690 | 1690 | Ceiling Fan Point. (b) Medium point ………………….. | 48 | each | |
| 1691 | 1691 | Exhust Fan. © Long point ………………….. | 16 | each | |
| 1692 | 1692 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 18 | each | |
| 1693 | 1693 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Medium point up to 6.00 metre. Length. | 36 | Each | |
| 1694 | 1694 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Long point up to 10.00 metre. Length. | 8 | Each | |
| 1695 | 1695 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits.(a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 1956 | Rm | |
| 1696 | 1696 | (b) With 2 x 4 sq. mm + 1 x 2.5 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 512 | Rm | |
| 1697 | 1697 | (b) With 2 x 6 sq. mm + 1 x 4 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 452 | Metre. | |
| 1698 | 1698 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 48 | each | |
| 1699 | 1699 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 48 | each | |
| 1700 | 1700 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. Trans Air 300 mm sweep (Crompton make) | 16 | Each | |
| 1701 | 1701 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 35 | each | |
| 1702 | 1702 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate) Philips/ Wipro/ Bajaj/Havells/HPL /Solar/ Jaquar make. | 60 | each | |
| 1703 | 1703 | Philips make) Cat No.SGP 401 1xSONT-150W For Lamp 1xSONT-150W (IP-65) / Crompton Greaves make) SSGN1215H/FG For lamp 1x150W HPSV (T) / Havells: LHBW20115036 For lamp 1x150W SON-T. | 2 | Each | |
| 1704 | 1704 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 6 way SPN double door | 4 | Each | |
| 1705 | 1705 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series (ABB, Schneider MG, legrand, Hager make) 40A | 4 | Each | |
| 1706 | 1706 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. 6 A to 32A | 16 | each | |
| 1707 | 1707 | Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.25M X0.7MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 250A 4pole 415V MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:\n1. 20mm X 5mm 4 strip copper Bus-Bar 0.6M length each\n2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no\n3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no\n4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no\n5. Voltmeter & Ammeter Selector Switch - 2 no\n6. 2 A Slide fuse unit - 3nos. \n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) \n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | 1 | Each | |
| 1708 | 1708 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 2 | each | |
| 1709 | 1709 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 2 | each | |
| 1710 | 1710 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | 67 | Metre. | |
| 1711 | 1711 | Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 25 KA 415V 50 Hz 4P MCCB \n(Schneider, legrand, Siemens, Indo Asian make) 125A | 1 | Each | |
| 1712 | 1712 | Supplying with fitting and fixing Single Phase D.O.L Starter of the following specification complete including making necessary connection as approved, specified and directed by the deptt. Overload Relay Range 3.8 - 6.0 Amps for 2.2 KW | 1 | Each | |
| 1713 | 1713 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 11KV gd aluminium conductor LT armoured U.G. cable laid in ground/partially in air (10% sq mm balance stranded conductor,XLPE insulated,cores laid up PVC tape inner sheathed,Armour(Aluminium for single core up to 70 sq.mm balance aluminium strip,Galvanish for cables up to 2x10 sq.mm 3x10 sq.mm,4x6 sq.mm balance all galvanish steel strip)extruded PVC type ST2 sheathed,650/1100V grade as per IS 7908(part 1) 1988 armoured U.G Cable U.G cable laid in ground/partially in air(as required for termination over ground including excavation of cable treanch up to depth of 75cm,refilling,protective brick covering,sand cushioning etc complete handing of surplus spoil,debris etc to proper place as specified and directed by the deptt.(Nicco / Havells/ RPG / CCI /Polycab/Gloster/ Finolex made or equivalent) 3 & 1/2 Core A2XFY. 50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 78 | Metre | |
| 1714 | 1714 | (19) 2-STORIED RCC RESIDENTIAL BUILDING(4 UNITS) FOR NURSE QUARTER- 2 UNITS & DRIVER QUARTER- 2 UNITS CIVIL WORK:- \nSurface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | 357.33 | Sqm | |
| 1715 | 1715 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil | 250 | Cum | |
| 1716 | 1716 | Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (a) Upto a depth of 1.5 metre | 233 | Sqm | |
| 1717 | 1717 | (b) Above 1.5 m upto 3.00 m depth | 150 | Sqm | |
| 1718 | 1718 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 220 | Sqm | |
| 1719 | 1719 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 8.45 | Cum | |
| 1720 | 1720 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (i) using 25mm thick plank | 38 | Sqm | |
| 1721 | 1721 | Sides of tie beams, grade beams etc. at or below ground level.\n(b) Using 25mm thick plank | 51 | Sqm | |
| 1722 | 1722 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | 200 | Sqm | |
| 1723 | 1723 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 300 | Sqm | |
| 1724 | 1724 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.(a) Floors etc. upto 200mm in thickness | 350 | Sqm | |
| 1725 | 1725 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. | 15 | Sqm | |
| 1726 | 1726 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). | 200 | Sqm | |
| 1727 | 1727 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) . (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. b) M20 grade concrete or Prop. 1:1.5:3 | 12 | Cum | |
| 1728 | 1728 | (B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 20 | Cum | |
| 1729 | 1729 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | 15 | Cum | |
| 1730 | 1730 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.\n | 10.51 | Cum | |
| 1731 | 1731 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 320 | Sqm | |
| 1732 | 1732 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned in above item\n(a) 112mm thick brick/ R.B wall | 70 | Sqm | |
| 1733 | 1733 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 10 | Sqm | |
| 1734 | 1734 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.\n(a) With earth or silt or sand obtained by head load with lead upto 90m and lift upto 2m | 60 | Cum | |
| 1735 | 1735 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 100 | Sqm | |
| 1736 | 1736 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed. (b) 20 mm thick | 148 | Sqm | |
| 1737 | 1737 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 30.62 | Sqm | |
| 1738 | 1738 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable | 20.5 | Sqm | |
| 1739 | 1739 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | 10.5 | Sqm | |
| 1740 | 1740 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 75 | Rm | |
| 1741 | 1741 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core. (ii) 35 mm thick . | 12 | Sqm | |
| 1742 | 1742 | Grading roof for water proofing treatment with \n(b) Cement mortar \n(i) 1:3 (1 cement: 3 coarse sand) | 2.65 | Cum | |
| 1743 | 1743 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \n(b) In cement mortar 1:4 | 500 | Sqm | |
| 1744 | 1744 | 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete. B) On fair side\n (b) In cement mortar 1:4 | 500 | Sqm | |
| 1745 | 1745 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | 300 | Sqm | |
| 1746 | 1746 | Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster | 250 | Sqm | |
| 1747 | 1747 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. a) On Single coat plaster | 250 | Sqm | |
| 1748 | 1748 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. a) On Single coat plaster | 89.55 | Sqm | |
| 1749 | 1749 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (b) 20 mm thick | 140.05 | Sqm | |
| 1750 | 1750 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range \nSomany/ Orient/Nitco/Asian Make ii) Of size 200mmx300mm and above | 59.04 | Sqm | |
| 1751 | 1751 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 210.6 | Sqm | |
| 1752 | 1752 | Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. (a) Using white cement | 2.5 | Sqm | |
| 1753 | 1753 | Providing 0.63 mm thick(24 gauge) galvd plain sheet in valley , lining, flashing etc. and fitted with gavd. Iron J or L hook bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in a positions as directed. | 7.32 | Sqm | |
| 1754 | 1754 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. b) 75mm thick slab | 5.09 | Sqm | |
| 1755 | 1755 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\n(a) Sliding door bolts. \ni) 300mm x 16mm | 28 | Each | |
| 1756 | 1756 | (b) Tower bolts\niii) 200mm x 12mm | 25 | Each | |
| 1757 | 1757 | (c) Door handles\niii) 150mm | 10 | Each | |
| 1758 | 1758 | t) Door stopper with rubber stopper | 8 | Each | |
| 1759 | 1759 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars | 62 | Qtl | |
| 1760 | 1760 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 2.5 | Qtl | |
| 1761 | 1761 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 200 | Kg | |
| 1762 | 1762 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 11 | Sq.m. | |
| 1763 | 1763 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 1050 | Sqm | |
| 1764 | 1764 | b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | 1050 | Sqm | |
| 1765 | 1765 | d) Extra over item no. (b) and (c) above for every subsequent coat of water proofing cement paint of approved brand and manufactured. | 1050 | Sqm | |
| 1766 | 1766 | e) Extra over item no (b) above for finishing with cement paint on celing and sloping roof. | 420 | Sqm | |
| 1767 | 1767 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 420 | Sqm | |
| 1768 | 1768 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (a). With ready mixed paint , Wood primer (pink) | 85 | Sqm | |
| 1769 | 1769 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 85 | Sqm | |
| 1770 | 1770 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed \"red-lead/ red oxide\" primer. | 58 | Sqm | |
| 1771 | 1771 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 58 | Sqm | |
| 1772 | 1772 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | 85 | Sqm | |
| 1773 | 1773 | Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed. | 1050 | Sqm | |
| 1774 | 1774 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (a) Within Guwahati city only | 120 | Cum | |
| 1775 | 1775 | Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | 39.24 | Cum | |
| 1776 | 1776 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | 48.4 | Rm | |
| 1777 | 1777 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (1) Area of glass panes not exceeding 0.15m2 (c). 3.00mm thick. | 61.65 | Sqm | |
| 1778 | 1778 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 105.3 | Sqm | |
| 1779 | 1779 | SANITARY AND WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Vitreous water closet squatting pan (Indian type W.C Orissa pattern) of size 530 x 410 mm \n(a) White i)Hindware make | 4 | Each | |
| 1780 | 1780 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (B) Hindware Make (a) White (vii) Lotus (Cat.No.10013/11019) | 4 | Each | |
| 1781 | 1781 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (viii) Square Plain Small (Bowl Size - 355 x 355 x 180) Glossy | 4 | Each | |
| 1782 | 1782 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 4 | Each | |
| 1783 | 1783 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make (iii) Corner Soap tray (Cat. No.C9949) | 4 | Each | |
| 1784 | 1784 | Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (v) Towel rail Diplomat 900mm long (Cat.No.TR-0605) | 4 | Each | |
| 1785 | 1785 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051) | 4 | Each | |
| 1786 | 1786 | Providing, fitting and fixing Chrome Plated bottle trap pipe complete as directed and specified. (a) Sona make (ii) Pipe for bottle trap 450mm long (Cat. No.BT-0762) | 4 | Each | |
| 1787 | 1787 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 140 | Rm | |
| 1788 | 1788 | (iv) 75mm dia. | 70 | Rm | |
| 1789 | 1789 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 16 | Each | |
| 1790 | 1790 | (iv) 75 mm dia. | 12 | Each | |
| 1791 | 1791 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 12 | Each | |
| 1792 | 1792 | (iv) 75 mm dia. | 12 | Each | |
| 1793 | 1793 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make | 4 | Each | |
| 1794 | 1794 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 110mm dia. PVC cowel of ISI make | 4 | Each | |
| 1795 | 1795 | Providing fiting & fixing C.I. Grating to the floors complete as directed and specified. (a) 110mm dia | 16 | Each | |
| 1796 | 1796 | (c) 50mm dia | 16 | Each | |
| 1797 | 1797 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 8.1 | Cum | |
| 1798 | 1798 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 4 | Each | |
| 1799 | 1799 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (a) Supreme shower with arm | 4 | Each | |
| 1800 | 1800 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (A) Exposed on walls \na) 50 mm dia (Medium) i) Using Tata make | 49.8 | Rm | |
| 1801 | 1801 | b) 40 mm dia (Medium) i) Using Tata make | 60.5 | Rm | |
| 1802 | 1802 | c) 32 mm dia (Medium) i) Using Tata make | 100.7 | Rm | |
| 1803 | 1803 | d) 25 mm dia (Medium) i) Using Tata make | 108.2 | Rm | |
| 1804 | 1804 | e) 20 mm dia (Medium) i) Using Tata make | 42.4 | Rm | |
| 1805 | 1805 | (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. \nf) 15 mm dia (Medium) i) Using Tata make | 102 | Rm | |
| 1806 | 1806 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) \n1) Essco make (Delux/ Sumthing spl./Tropical) \n(a) Bib cock short body | 12 | Each | |
| 1807 | 1807 | Supplying fitting and fixing polymer stop-cock of Prayag polymer makeof approved size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \n(c) 15mm dia (Concealed type Roman handle) | 12 | Each | |
| 1808 | 1808 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \n(iii) Agmeco (classic) \n(a) Flat | 8 | Each | |
| 1809 | 1809 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.\n(a) 50 mm dia | 2 | Each | |
| 1810 | 1810 | Supplying fitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes. \n(b) 40 mm dia (Heavy duty) | 1 | Each | |
| 1811 | 1811 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes\n1) 2000 litre capacity\nii) Polycon make | 2 | Each | |
| 1812 | 1812 | Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed.\n(a) 2000 litres capacity | 2 | Each | |
| 1813 | 1813 | FIRE FIGHTING WORKS\nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 2 | Each | |
| 1814 | 1814 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 10 | RM | |
| 1815 | 1815 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 2 | each | |
| 1816 | 1816 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 2 | Each | |
| 1817 | 1817 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 2 | Each | |
| 1818 | 1818 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 2 | Each | |
| 1819 | 1819 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 2 | Each | |
| 1820 | 1820 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 10 | Each | |
| 1821 | 1821 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 10 | Each | |
| 1822 | 1822 | ELECTRICAL WORKS\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point. (b) Medium point ………………….. | 50 | P/P | |
| 1823 | 1823 | Ceiling Fan Point. (b) Medium point ………………….. | 18 | P/P | |
| 1824 | 1824 | Exhust Fan © Long point ………………….. | 7 | P/P | |
| 1825 | 1825 | Call bell Point Medium point ………………….. | 2 | P/P | |
| 1826 | 1826 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 16 | P/P | |
| 1827 | 1827 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Medium point up to 6.00 metre. Length. | 15 | Each | |
| 1828 | 1828 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Long point up to 10.00 metre. Length. | 1 | Each | |
| 1829 | 1829 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 720 | Rm | |
| 1830 | 1830 | (b) With 2 x 4 sq. mm + 1 x 2.5 sq. mm PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits | 180 | Rm | |
| 1831 | 1831 | Supplying and fixing of call bell (Buzzer ) including 5/6 Amp capacity button piano type bell push switch including connection as approved by the dep't.as required. | 2 | Each | |
| 1832 | 1832 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt.\n Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 20 | Each | |
| 1833 | 1833 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 20 | Each | |
| 1834 | 1834 | Supplying including fitting and fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the dep't. \n Trans Air 300 mm sweep (Crompton make) | 7 | Each | |
| 1835 | 1835 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 20 | Each | |
| 1836 | 1836 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 30 | Each | |
| 1837 | 1837 | Supplying with fitting & fixing sheet steel phosphatised, power painted Single door surface mounting MCB DB incorporated with bas-bar, neutral link, earth bar and din rail etc. fitted on wall with grouting nuts & bolts as per reqd. complete with making necessary connection as specified and directed by the deptt. (ABB,Schneider MG,legrand,Hager,Crabtreexpro make) 8 Way SPN Single door | 2 | Each | |
| 1838 | 1838 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series. (ABB, Schneider MG, legrand, Hager make) 40 A | 2 | Each | |
| 1839 | 1839 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. 6 A to 32A | 12 | Each | |
| 1840 | 1840 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 11KV gd aluminium conductor LT armoured U.G. cable laid in ground/partially in air (10% sq mm balance stranded conductor,XLPE insulated,cores laid up PVC tape inner sheathed,Armour(Aluminium for single core up to 70 sq.mm balance aluminium strip,Galvanish for cables up to 2x10 sq.mm 3x10 sq.mm,4x6 sq.mm balance all galvanish steel strip)extruded PVC type ST2 sheathed,650/1100V grade as per IS 7908(part 1) 1988 armoured U.G Cable U.G cable laid in ground/partially in air(as required for termination over ground including excavation of cable treanch up to depth of 75cm,refilling,protective brick covering,sand cushioning etc complete handing of surplus spoil,debris etc to proper place as specified and directed by the deptt.(Nicco / Havells/ RPG / CCI /Polycab/Gloster/ Finolex made or equivalent) 3 & 1/2 Core A2XFY. 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 30 | Metre | |
| 1841 | 1841 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 1842 | 1842 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 1843 | 1843 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 36 | R.m | |
| 1844 | 1844 | (20) ASSAM TYPE SWEEPERS QUARTER- 2 UNITS CIVIL WORK:- \nJungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm | 151.32 | Sqm | |
| 1845 | 1845 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (c) In soft or laminated rock or medium shale | 37 | Cum | |
| 1846 | 1846 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. | 100 | Sqm | |
| 1847 | 1847 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. . | 7 | Qntl | |
| 1848 | 1848 | c) ISI approved Mild steel reinforcement bar(M.S.Bar) | 1 | Qntl | |
| 1849 | 1849 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank | 10 | Sqm | |
| 1850 | 1850 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. | 40 | Sqm | |
| 1851 | 1851 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 3.5 | cum | |
| 1852 | 1852 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M15 grade concrete or Prop. 1:2:4 | 6 | Cum | |
| 1853 | 1853 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 3.2 | Cum | |
| 1854 | 1854 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5. | 4.2 | Cum | |
| 1855 | 1855 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. | 32 | Cum | |
| 1856 | 1856 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | 14 | Cum | |
| 1857 | 1857 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 25 | RM | |
| 1858 | 1858 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable | 7.5 | Sqm | |
| 1859 | 1859 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | 2.95 | Sqm | |
| 1860 | 1860 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. \n(1 cement:4 sand) | 98 | Sqm | |
| 1861 | 1861 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 15.65 | Sqm | |
| 1862 | 1862 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4 | 180 | Sqm | |
| 1863 | 1863 | B) On fair side b) In cement mortar 1:4 | 180 | Sqm | |
| 1864 | 1864 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 72 | Sqm | |
| 1865 | 1865 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 66.5 | Sqm | |
| 1866 | 1866 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Normal range Somany/ Orient/Nitco /Asian Make Of size 300mmx300mm and above | 20.16 | Sqm | |
| 1867 | 1867 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (i) 9.5mm thick | 64.5 | Sqm | |
| 1868 | 1868 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. b) Using other ISI marked approved circular hollow section | 3 | Qntl | |
| 1869 | 1869 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 110 | Sqm | |
| 1870 | 1870 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete. TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick | 19.67 | RM | |
| 1871 | 1871 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | 48 | RM | |
| 1872 | 1872 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. b) Non decorative type and block board core. (ii) 35 mm thick . | 10 | Sqm | |
| 1873 | 1873 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 100 | Kg | |
| 1874 | 1874 | c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 100 | Sqm | |
| 1875 | 1875 | g) Distempering with dry distemper of approved brand and manufacture (twocoats) and of required shade on new wall surface to give an even shade,after throughly brushing the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth. | 100 | Sqm | |
| 1876 | 1876 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 200 | Sqm | |
| 1877 | 1877 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | 200 | Sqm | |
| 1878 | 1878 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 140.78 | Sqm | |
| 1879 | 1879 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 30.69 | Sqm | |
| 1880 | 1880 | (ii).Surfaces up to 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | 40.39 | Sqm | |
| 1881 | 1881 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts ii) 250mm x 16mm | 1 | Each | |
| 1882 | 1882 | b) Tower bolts iii) 200mm x 12mm | 10 | Each | |
| 1883 | 1883 | c) Door handles ii) 100mm | 10 | Each | |
| 1884 | 1884 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2. (c). 3.00mm thick. | 17.81 | Sqm | |
| 1885 | 1885 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. a) 100mm thick slab | 4.39 | Sqm | |
| 1886 | 1886 | b) 75mm thick slab | 0.56 | Sqm | |
| 1887 | 1887 | Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). (b) 50mm thick | 26.91 | Sqm | |
| 1888 | 1888 | Pre-cast cement concrete tiles 20 mm thick with aggregate of sizes up to 6 mm laid in floors, treads of steps and landing with 20 mm thick bed of cement mortar in prop. 1:6 (1cement : 6 coarse sand ) joined with neat cement slurry with pigment to match the (c) Any shade or combination of shades using grey cement. | 20.42 | Sqm | |
| 1889 | 1889 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | 47.5 | RM | |
| 1890 | 1890 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city | 50 | Sqm | |
| 1891 | 1891 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 66.5 | Sqm | |
| 1892 | 1892 | SANITARY AND WATER SUPPLY WORKS\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm a) White ii) Hindware make | 2 | Each | |
| 1893 | 1893 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) ii) Hindware make a) White (i) Sleek+ PVC cistern | 2 | Each | |
| 1894 | 1894 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (B) Hindware Make (a) White (x) Neptune 550 x 460 (Cat. No.10072/11029) | 2 | Each | |
| 1895 | 1895 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (i) Single Bowl with Veg Bowl & Drain Board (400 x 200) Flat Edge- Glossy (Cat.No.C8545) | 1 | Each | |
| 1896 | 1896 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 2 | Each | |
| 1897 | 1897 | Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (iii) Towel rail Diplomat 600mm long (Cat.No.TR-0605) | 2 | Each | |
| 1898 | 1898 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. (b) Sona make (i) Towel ring round (Cat.No.TR-06051) | 2 | Each | |
| 1899 | 1899 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 10.7 | RM | |
| 1900 | 1900 | (iv) 75mm dia. | 7.5 | RM | |
| 1901 | 1901 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia. | 2 | Each | |
| 1902 | 1902 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. | 2 | Each | |
| 1903 | 1903 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (iv) 75mm dia. PVC cowel of ISI make | 2 | Each | |
| 1904 | 1904 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 1.5 | Cum | |
| 1905 | 1905 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. (A) Exposed on walls c) 32 mm dia (Medium) i) Using Tata make | 15 | RM | |
| 1906 | 1906 | d) 25 mm dia (Medium) i) Using Tata make | 25 | RM | |
| 1907 | 1907 | f) 15 mm dia (Medium) i) Using Tata make | 10 | RM | |
| 1908 | 1908 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (d) Hammer shower with arm | 2 | Each | |
| 1909 | 1909 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Essco make (Delux/Sumthing spl./Tropical) (a) Bib cock short body | 4 | Each | |
| 1910 | 1910 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (v) Essco brand (a) Stop cock 15 mm dia male/female end | 4 | Each | |
| 1911 | 1911 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (c) New Diplomat/ / Rocket/ Mini Kranti/ Mini Hex shower with arm | 2 | Each | |
| 1912 | 1912 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 1 | Each | |
| 1913 | 1913 | LANDSCAPING WORKS\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 2 | Each | |
| 1914 | 1914 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 2 | Each | |
| 1915 | 1915 | ELECTRICAL WORKS\nWiring for light / Fan/ Call Point with 2 x1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 6 Amps flush type switch/bell push (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)GI/Ms switch board(ISI marked)half conceal on wall with phenilic laminated sheet cover,ceiling rose (Anchor/Gold medal/Kolor Kany,Kom/Havells or equvalent make as approved by the deptt.)etc complete as directed and specified by the deptt. Light Point. (b) Medium point ………………….. | 10 | P/P | |
| 1916 | 1916 | Ceiling Fan Point. (b) Medium point ………………….. | 8 | P/P | |
| 1917 | 1917 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent make as approved by the deptt.including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) and 6 amp flush type switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.)earthing the third pin of the socket .as required on the switch board in flat ISI marked casing \"n\" capping system,when fitted on same board of light and fan. | 3 | P/P | |
| 1918 | 1918 | Wiring to 5 pin 6 Amps plug point with 1.5 sq m m.PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 100 volts(Finolex/RR kable or equivalent marke as approved by the deptt.with flat 19mm ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.)in surface system,including 5 pin 6 Amps flush typeplug socket and 6 Amps F/T switch (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) GI / MS switch board ( ISI marked) with phenilic laminated sheet cover including earth continuity with 1.5 sq.mm.cable to third pin of the plug socket etc.as required complete,when placed elsewhere. \n(b) Medium point ………………….. | 1 | P/P | |
| 1919 | 1919 | Wiring for drawing sub-main line with PVC insulated single core unsheathed unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts(Finolex/RR kable or equivalent marke as approved by the deptt) in surface flat ISI marked casing 'n' capping (AKG/precision/presto plast/polycab.MW or equivalent make as approved by the deptt.) system including earth continuity. (a) With 2 x 2.5 sq. mm + 1x 2.5 sq. mm ,PVC insulated unsheathed single core cooper conductor cable with 19 mm dia rigid PVC casing caping conduits. | 85 | Rm | |
| 1920 | 1920 | Supplying including fitting & fixing of high speed AC ceiling fan completed with all accessories like down rod, canopy etc. of following sweeps with making necessary connection etc. as required complete and directed by the deptt. Premium model 1200 mm sweep(Orient PSPO make)/Premium model 1050/1200 mm sweep SS-390 Deco (Havells make) | 8 | Each | |
| 1921 | 1921 | Supplying including fitting fixing of Electronic STEP Type Regulator for eciling fan complete with all connection in the existing board as required complete and as directed by the deptt. Electronic Type | 8 | Each | |
| 1922 | 1922 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/Angle holder/decorative bracket/bulk head fitting/pendent holder etc. as specified and directed by the dep't. | 4 | Each | |
| 1923 | 1923 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as lamp,ballast,stsrter etc.directly on wall/ceiling including connection as approved by the dep't.) with 1.5 sq.mm PVC insulated S.C. copper conductor a srequired and as directed by the deptt. Sleek and compact T-8 in plastic batten luminaries complete with Electronic ballast with 1x36 watt Fluorescent tube.(Crompton Greaves make) Model - T8 L036 EB X LITE with power Lux Lamp/ L036 EBR X LITE with super Saver Lamp/L036 EBR X LITE with power Lux Lamp or equivalent (Equivalent will be selected by the deptt. considering the mother items rate)Philips/ Wipro/ Bajaj/Havells/HPL/Solar/Jaquar make. | 6 | Each | |
| 1924 | 1924 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) \n6 way SPN double door | 1 | Each | |
| 1925 | 1925 | Supplying with fitting and fixing single pole 10KA 240/415 V 50 Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt.(Legrand/MerlinGerin/Hagger make) B.C.Series. 6 A to 32A | 4 | Each | |
| 1926 | 1926 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. C Series\n(ABB, Schneider MG, legrand, Hager make) 6 to 32A | 1 | Each | |
| 1927 | 1927 | Supply,installation & testing of G.I. earth station with perforated 40mm dia and 4.50 Metre long heavy duty G.I.pipe with necessary 40mm dia G.I. fitting such as socket,Tee,elbow,nipple and 50mmx40mm G.I. reducing socket for funnel including locking arrangement with 300 x 300 x 6mm hinged cover C.I.cover plate complete with digging of earth pit,construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | 1 | Each | |
| 1928 | 1928 | Extra for using salt ( 5 Kg) and charcoal (64 Kg)in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the dep't. | 1 | Each | |
| 1929 | 1929 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears of electrical machineries including making necessary connection as approved,specified and directed by the dep't. | 33 | R.m | |
| 1930 | 1930 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 2 Core A2XWaY A2XFaY. 6.00 Sq.mm 2 Core armoured U.G. cable | 25 | Rm | |
| 1931 | 1931 | (21) SITE DEVELOPEMENT CUM RETAINING WALL CIVIL WORK:- Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.(b) Other than Guwahati city | 46467.2 | Cum | |
| 1932 | 1932 | Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage. | 383 | RM | |
| 1933 | 1933 | (22) CONSTRUCTION OF INTERNAL ROAD, BOX CULVERT \nCIVIL WORK:- Construction of Internal Road with 300 mm thick subgrade with approved materials, 150 mm thick granular sub base,using Grading III materials, 75 mm thick W.B.M. Grading III over which providing & laying of inter locking concrete block pavement (I.C.B.P) etc. complete (a) Road of 3.50M of width (Total length 970.00 RM) | 3395 | Cum | |
| 1934 | 1934 | Construction of Internal Road with 300 mm thick subgrade with approved materials, 150 mm thick granular sub base,using Grading III materials, 75 mm thick W.B.M. Grading III over which providing & laying of inter locking concrete block pavement (I.C.B.P) etc. complete (b) Road of 3.00M of width (Total length 223.40 RM) | 670.2 | Cum | |
| 1935 | 1935 | (c) Box Culvert at Approach Road:- Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.(A) Up to a depth of 2.00m below the existing ground level.(a) In ordinary soil | 7.59 | Cum | |
| 1936 | 1936 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(a) Brick on flat soling. | 13.13 | Sqm | |
| 1937 | 1937 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).(a) In prop 1cement: 3 sand :6 coarse aggregate by volume | 0.98 | cum | |
| 1938 | 1938 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)\n (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. . | 10.64 | Qtl | |
| 1939 | 1939 | Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) I) Using mixture machine(A) In sub - structure up to plinth levelFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.P) Using admixture, plasticiser etc (b) M20 or Prop. 1:11/2:3 | 32.38 | Cum | |
| 1940 | 1940 | (23) CONSTRUCTION OF INTERNAL DRAIN CIVIL WORK:- \nProviding drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. (a) Along road of 3.50M of width | 1940 | Rm | |
| 1941 | 1941 | (b) Along road of 3.00M of width | 417.39 | Rm | |
| 1942 | 1942 | (24) PROVIDING 100 KVA TRANSFORMER SUB-STATION, D.G. SET, CAMPUS LIGHTING,H.T. & L.T. LINE ETC. ELECTRICAL WORK:\nSupplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 40 A | 10 | Each | |
| 1943 | 1943 | Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 160 A | 2 | Each | |
| 1944 | 1944 | Supplying with fitting and fixing Four Pole 415V Front handle operated On Load Change over switch (IP-20 protection powder painted sheet steel enclosure fitted on angle iron frame of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100 A | 1 | Each | |
| 1945 | 1945 | Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.35M X 1.20MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 6nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: \n1. 20mm X 3mm4 strip copper Bus-Bar 0.6 M length each \n2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no\n3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no\n4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no\n5. Voltmeter & Ammeter Selector Switch - 2 no6. 2 A Slide fuse unit - 3nos(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | 2 | Each | |
| 1946 | 1946 | Supplying, erection, testing and commissioning of 12 M high mast system with its accessories such as foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates, non-integral flood light luminaries with 1 no. 400 W HPSVT lamps and its control gear boxes (Bajaj/ Crompton/ Wipro/ HPL/ Solar/ Philips make) twin dome aviation obstruction lights of with Neon spiral lamps, control panel housing 32 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. Mast shaft shall be in two sections, hot dip galvanised and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, steel rope 6 mm dia ( 7 / 19 construction) , trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for 6 luminaries symmetrically & its control gear boxes and lightning finial. The mast shall be erected on suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth. The mast shall have an integral power tool installed inside the base compartment for its operation.(BAJAJ/ SRB/VALMONT/ PHILIPS/ PARUTHI ENGR make) Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates.Supply of 6 nos. non-integral flood light luminaries with one nos 400 W HPSVT lamps and its control gear boxes.\nSupply of twin dome aviation obstruction lights with Neon spiral lamps.\nSupply of control panel housing 32 A TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor.\nB. Erection -Construction of suitable shallow foundation with 1 : 2 : 4 concrete for the high mast considering the safe soil bearing capacity at site as 10 T / Sq meter at 2 metre depth with all materials and labour.\nErection of the high mast with the help of suitable equipments and Wiring of luminaries with all Wiring materials and labour.\nprovision of GI pipe earthing for high mast with 2.5 m long 40 mm dia GI pipe including connection as approved by the Deptt.)to high mast terminal with 25 x 3 mm GI strip with all materials and labour. ( 2 nos per mast require .\nErection of the above panel on suitable foundation including all materials and labour. | 1 | Each | |
| 1947 | 1947 | Supplying with fitting & fixing of the following integral type street light luminaries complete and consisting of single piece integral epoxy gray powder coated dia cast aluminium housing gasket, pot optic reflector, cast aluminium frame from heat resistance toughened clear glass cover and accessories such as Condenser, lamp Holder, Ballast, lamp etc. in the existing pole including making necessary connection as approved by the Deptt.)with 2× 2.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the department. Philips make) Cat No.SPP 335 1xSONT-250W For Lamp 1xSONT-250W (IP-66) .\n | 60 | Each | |
| 1948 | 1948 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 6.00 Sq. mm.4 Core armoured U.G. cable | 700 | Rm | |
| 1949 | 1949 | 16.00 Sq. mm.4 Core armoured U.G. cable | 350 | Rm | |
| 1950 | 1950 | 50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 120 | Rm | |
| 1951 | 1951 | 120.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | 20 | Rm | |
| 1952 | 1952 | Supplying, installation testing and commissioning of the following rating copper wound indoor / out door type transformer complete including the payment to be made to power supply authority for supervision charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making necessary arrangement for charging approval of the sub-station from the competent authority as directed and specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200 KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure.\n 100 KVA,50Hz.11/0.433 KV. Oil filled transformer with Off Circuit tap change. | 1 | Each | |
| 1953 | 1953 | Supplying and erection PSC pole 9.75 metre long, the pole is to be erection in 1:3:6 plain cement concrete foundation of size 1.50 m x 0.45 m x 0.45m having P.C.C base foundation 15 cm x 60 cm x 60cm including edge brick soiling and plastering above G.L. portion (0.30 metre complete with excavation of earth, handling of Surplus Soil, debris etc. to the proper place and refilling etc. as specified and as directed by the department. | 2 | Each | |
| 1954 | 1954 | Supplying and erection of H.T. stay set complete (Galvanize with 19mm dia x1.8m long stay rod anchor plate of size 30cm x 30cm x6.4 mm thimble stay clamps tube buckle (19mmx 60c 7/3.15 mm dia G.I stay and strain insulation etc. in cement concrete 1:3:6:(1Cement:3Course sand:6graded stone aggregate 40mm nominal size foundation including excavation and refilling etc. as required and as directed by the department. | 2 | Each | |
| 1955 | 1955 | Supplying and fitting fixing of galvanised channel of 100 mm x 50 mm x 65 x 2200 mm long complete with clamps ,blots, nuts etc. as required and as directed by the department. | 9 | Each | |
| 1956 | 1956 | Supplying and erection of 11 KV Pin insulator (Poly) with G.I.pin, blots and nuts coach screw etc. as required and as directed by the department. | 3 | Each | |
| 1957 | 1957 | Supplying and erection of 11 KV Disc insulator (Poly) 45 KN with hard ware fittings etc. as required and as directed by the department. | 6 | Each | |
| 1958 | 1958 | Supplying and fixing of 11 KV 400 A Gang operated switch with all accessories complete as required and as directed by the department. | 1 | Set | |
| 1959 | 1959 | Supplying and fixing of 11 KV 150 A D.O. fuse set complete as required and as directed by the department. | 1 | Set | |
| 1960 | 1960 | Supplying and fixing of 11 KV 5 KA Lighting arrestor (Poly) set complete as required and as directed by the department. | 1 | Set | |
| 1961 | 1961 | Supplying and fitting fixing pole clamp complete as required and as directed by the department. | 18 | Each | |
| 1962 | 1962 | Supplying and fitting fixing of P.G. clamp for Racoon conductor complete as required and as directed by the department. | 3 | Each | |
| 1963 | 1963 | Supplying including installation of 4' dia. C.I. earth pipe complete as required and as directed by the department. | 12 | Each | |
| 1964 | 1964 | Supplying and fitting fixing of H.T. danger plate complete as required and as directed by the department. | 5 | Each | |
| 1965 | 1965 | Supplying, erection and commissioning of the following specification as per IS:2713 : 410 SP hot dip Galvanized Steel tubular pole manufacturing out from electrically welded in 3 (three section having a base plate including providing all required building materials as directed and specified by the deptt. (BANSAL/SRP / Valmont / PARUTHI ENGR make) 410 SP 43 Length of pole = 10.00 metre., Length of sections, Bottom = 5.20 M, Middle = 2.40 M, Top = 2.40 M, Out side dia. & Thickness Bottom = 165.10 x 4.50 mm, Middle =138.70 x 4.50 mm, Top =114.3 x 3.65 mm | 30 | Each | |
| 1966 | 1966 | Construction of 3 phase 11 KV Line on 8.5 m PSC Pole using AAA Raccoon conductor 7/3.81mm with T cross arm average span 70m. | 0.3 | KM | |
| 1967 | 1967 | Supplying including erection testing and charging of 3 phase 4 wire LT line 7.5 m PSC pole using rabbit conductor. Average span 40m | 1.1 | KM | |
| 1968 | 1968 | Supplying including fitting and fixing of Hot Dip galvanised arm bracket for installation of luminaries. \n Header with top cap 300 mm long pipe of thickness 3 with arrangement to fix on pole top with 3 Nos. of bolts. \ni Armed of required length size 48.3mm out side dia x 3.25mm thick (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezone make) Stiffener plate from arm of the following types : Double arm decorative bracket1000mm long for 3m to 10 metre. Poles. | 30 | Each | |
| 1969 | 1969 | Supplying testing and commissioning of Time switches ( Analog) 24H 16A 30mts 1 channel without reserve in the existing control panel as specified and directed by the department ( Schneider make /CRABTREE).Time switches ( Analog) 24H 16A 30mts 1 channel without reserve | 3 | Each | |
| 1970 | 1970 | Supplying including Fitting & Fixing of Cable Junction Box ( MK or equivalent Schneider/ RR /Legrand) \n | 30 | Each | |
| 1971 | 1971 | Supplying including installation, testing and commissioning of Air/Water Cooled Diesel Generator set coupled to suitable alternator of 220/415 V, AC, 1/3-Phase 0.8 p.f.(la mounted on a 1) M.S. Fabricated base frame.,2) M.S. fuel tank of required capacity.,3) Residual Silencer.,4) Standard Control Panel.5) Suitable batteries with lead.,5) First fill of lube oil.,6) Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the Technical Specification.. as per manufacturer. (RANGE FROM 5 KVA TO 625 KVA) Kirloskar green/bliss, Leyland, Volvo Penta, Perkinson, Mahindra, Greaves, Escort engine and Kirloskar, Stamford, Leroy somer alternator.\n50- 1- 3980x1240x1680- 1870 Kg- A/C | 1 | Each | |
| 1972 | 1972 | Non - Schedule items :-\nPayment to be made to APDCL for Load Security. | 75 | KW | |
| 1973 | 1973 | Control Room, DG shed with sub-station net fencing | 24 | M | |
| 1974 | 1974 | (25) WATER SUPPLY TREATMENT PLANT:- Source Development Deep Tube Well (Machine Boring) | 1 | Each | |
| 1975 | 1975 | Raw water pump set (a) No. of set- 3HP | 1 | Each | |
| 1976 | 1976 | (b) Installation, fitting fixing, Suction & Delivery of RWPS | 1 | Each | |
| 1977 | 1977 | Raw water pump house | 9 | sqm | |
| 1978 | 1978 | Sadimentation Tank | 30000 | Ltr | |
| 1979 | 1979 | Filter Bed | 4 | Cum | |
| 1980 | 1980 | Filter under drainage system, inter connection to CWR, placing and charging of filter media, valve chamber all complete | 1 | Each | |
| 1981 | 1981 | Under Ground Reservoir | 60000 | Ltr | |
| 1982 | 1982 | Over Head Reservoir | 70000 | Ltr | |
| 1983 | 1983 | Clear water pump house | 12 | sqm | |
| 1984 | 1984 | Clear water pump set | 1 | each | |
| 1985 | 1985 | Installation, fitting fixing, Suction & Delivery of CWPS | 1 | each | |
| 1986 | 1986 | Chemical Dozing | 1 | each | |
| 1987 | 1987 | Areator | 1 | each | |
| 1988 | 1988 | Distribution System (i) 110 mm Dia | 1000 | RM | |
| 1989 | 1989 | (i) 90 mm Dia | 1250 | RM | |
| 1990 | 1990 | (i) 75 mm Dia | 750 | RM | |
| 1991 | 1991 | (i) Cost of specials | 1 | each | |
| 1992 | 1992 | Labour Charge | 1 | each | |
| 1993 | 1993 | Trial Run | 1 | each | |
| 1994 | 1994 | Cost of Survey | 1 | each | |
| 1995 | 1995 | T&P Materials | 1 | each | |
| 1996 | 1996 | Miscellaneous | 1 | each |
AI Tender Summary
Tender Timeline
Jan 04, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 14, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 14, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender