Laying Of Cc In Between The Place Of Rural Godown And Gby Godown At Market Yard Ghanpur ( Station ) Under Amc., Ghanpur (Station) Of Janagaon Disrict.
Tender Value
42.30 Lakhs
Estimated cost
Bid Submission
18 Jan 2020
0 days left
EMD
42400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
JANGOAN → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Laying Of Cc In Between The Place Of Rural Godown And Gby Godown At Market Yard Ghanpur ( Station ) Under Amc., Ghanpur (Station) Of Janagaon Disrict.
BOQ
| S.No | Subwork Name | Specification Number | Quantity | UOM | Rate(INR) | Amount(INR) |
|---|---|---|---|---|---|---|
| 1 | Laying of CC in between the place of Rural | Spl. Spn | 1190.00 | Rmt | 10.50 | 12495.00 |
| Providing Bitumin hot sealing compound (grade - A ISI) in groove cutting including cost and conveyence of all materials and labour charges etc., complete for finished item of work as per Standard Specification and as directed by the Departmental Engineer-in-charge. | ||||||
| 2 | Laying of CC in between the place of Rural | Spl. Spn | 1190.00 | Rmt | 50.00 | 59500.00 |
| Construction of sawn joint groove using diamond studded blades 3 to 5mm wide, 25mm completing with Clause 602.6.5 of specification of Roads & Bridges works published at New Delhi in 1995 by IPC on behalf of Govt of India, Ministry of Surface Transportation etc., complete for finished item of work as per Standard Specification and as directed by the Departmental Engineer-in-charge. | ||||||
| 3 | Laying of CC in between the place of Rural | Spl. Spn | 2975.00 | Sqm | 60.00 | 178500.00 |
| Providing dish finished flooring to the CC surface for having good compaction of CC surface and to have smooth surface of the road including cost and conveyance of all materials, hire charges of dish and fan, incidental and operational and labour charges etc., complete for finished item of work as per Standard Specification and as directed by the Departmental Engineer-in-charge. | ||||||
| 4 | Laying of CC in between the place of Rural | 126.0 | 1.00 | MT | 55080.55 | 55081.00 |
| Providing TMT bars of Fe-500 grade as per IS 1786-1979 of different diameters for RCC works, including labour charges for streightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No. 126) TATA / SAIL / VSP & JINDAL | ||||||
| 5 | Laying of CC in between the place of Rural | Spl. Spn | 178.50 | Sqm | 430.60 | 76862.00 |
| Providing Mastic Pad (Siflex make) 12.70mm thick in between CC panel including cost and conveyance of all materials and labour charges etc., complete for finished item of work and as per Standard Specication and as directed by the Departmental Engineer-in-charge. | ||||||
| 6 | Laying of CC in between the place of Rural | 1501 & 1515 | 446.25 | Cum | 5199.31 | 2320192.00 |
| Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement of 350 Kgs or any other type as per Clause 1501.2.2 M20 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. | ||||||
| 7 | Laying of CC in between the place of Rural | Spl. Spn | 2975.00 | Sqm | 15.00 | 44625.00 |
| Supply and fixing of 125 micron polythene sheet as seperator layer in between lean concrete and flooring concrete including cost and conveyance of all materials etc., complete for finished item of work as per Standard Specication and as directed by the Departmental Engineer-in-charge. | ||||||
| 8 | Laying of CC in between the place of Rural | 402.0 | 297.50 | Cum | 3592.96 | 1068906.00 |
| PCC (1:5:10) prop.using 40mm HBG machine crushed metal and unscreened sand including cost and conveyance of all materials to site from approved source, centering machine mixing & vibrating, laying concrete in position, tamping curing for requred period, labour charges for all items all other incidental and operational charges etc., complete for finished item of work as per Standard Specification and as directed by the Departmental Engineer-in-charge. | ||||||
| 9 | Laying of CC in between the place of Rural | 1501 & 1502 | 933.00 | Cum | 443.84 | 414103.00 |
| Construction of Gravel surface course by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller / Vibratory Roller 80-100 kN capacity to achieve the desired density, complete as per Technical Specification Clause 402 MORD etc., complete as per Standard Specification and as directed by the Engineer-in-charge for finished item of work. |
AI Tender Summary
Tender Timeline
Jan 01, 1900
11:30 IST
Tender Published
Tender notice published.
CompletedJan 18, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender