}

Comprehensive Annual Maintenance Contract For Elect Motor Fire Pumps & Sprinklers/Down Comer System Of Various High Rise & School Buildings Of Ndmc And Renewal Of Noc, NDMC Buildings-Delhi

New Delhi Municipal Council-NDMC has published Comprehensive Annual Maintenance Contract For Elect Motor Fire Pumps & Sprinklers/Down Comer System Of Various High Rise & School Buildings Of Ndmc And Renewal Of Noc. Submission Date for this Tender is 09-01-2020. Irrigation System Tenders in NDMC Buildings Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

23114733
Comprehensive Annual Maintenance Contract For Elect Motor Fire Pumps & Sprinklers/Down Comer System Of Various High Rise & School Buildings Of Ndmc And Renewal Of Noc
Open Tender
Indian
Delhi
NDMC Buildings
09-01-2020

Tender Details

Comprehensive Annual Maintenance Contract For Elect Motor Fire Pumps & Sprinklers / Down Comer System Of Various High Rise & School Buildings Of Ndmc And Renewal Of Noc

Key Value

Document Fees
Refer document
EMD
INR 72936.0 /-
Tender Value
INR 36.46 Lakhs /-

BOQ Items

Name of Work: Comprehensive Annual Maintenance Contract for Elect Motor Fire Pumps & Sprinklers/Down Comer System of various High Rise & School Buildings of NDMC and renewal of NOC.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Annual Maintenance Contract (as per schedule given in the NIT) for the fire fighting wet riser / sprinkler system including electric motor, fire pumps, diesel driven fire engine, Fire Fighting accessories as per relevant BIS and keeping the system in perfect functional order round the clock, installed inventory below mentioned of various high rise buildings and schools of NDMC for servicing, maintenance, testing & fixing etc. with monthly two visit for each building by the Engineer/Technical Supervisor, four visit for each building by the Foreman and four visit for each building by the Helpers or whenever required in case of any defect occur/mishappening in the system as per relevant Code and attend the same immediately after calling by the NDMC staff. AMC shall be carried out to the entire satisfaction of Fire Officer/Engineer In Charge. BI01010001010000000000000515BI0100001113
2 1.01 NDMC BUILDINGS:\n1. Palika Bazar\n2. Palika Parking\n3. Pragati Bhawan 12 Months
3 1.02 NDMC BUILDINGS:\n1. Palika Kendra\n2. Palika Bhawan\n3. Chander Lok Building\n4. Mayur Bhawan 12 Months
4 1.03 NDMC SCHOOLS\n1. N.P. Boys Sr. Sec School, Mandir Marg.\n2. Navyug School, Mandir Marg\n3. N.P.Bengali Girls Sr. Sec. School, Gole market.\n4. N.P. Girls Sr. Sec. School, Gole market.\n5. N.P. Middle School Gole market \n6. N.P Pry. School, R.K. Ashram Marg.\n7. N.P. Girls Sr. Sec. School, Balmiki Basti \n8. N.P. Co-Ed Sr. Sec. School, Havlok Square\n9. Navyug School, Patodi House \n10. N.P. Co-Ed Day Boarding Middle School, Hanuman Lane\n11. N.P. Co-Ed Sr. Sec. School, Bapu Dham\n12. N.P. Co-Ed Sec. School, Sangli Mess\n13. N.P. Pry. School No – 3, Babar Road\n14. N.P. Co-Ed Sec. School, Babar Road\n15. Navyug School, Pandara Park\n16. N.P. Co-Ed Sr. Sec. School, Aurangzeb Lane\n17. N.P. Pry School, Lodi Road\n18. N.P. Co-Ed Sr. Sec. School, Lodi Road\n19. N.P. Co-Ed. Sr. Sec. School, Lodi Estate\n20. Navyug Sr. Sec. School Sarojini Nagar\n21. Navyug Sr. Sec. School, Peshwa Road\n22. Navyug Sr. Sec. School, Laxmi Bai Nagar\n 12 Months
5 2 Fire Fighting Work\n\nProviding and Fixing of G.I. Tank Fitting 80 mm dia with complete fitted nipple, sockets, tank connection etc. complete as per the direction of Fire Officer. 5 Nos.
6 3 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including cutting, screwing Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets, chilly clamps, including cutting holes and chases in bricks/core cutting in RCC wall/slab etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame including, dismantling of MS Pipe providing coat of steel primer and painting with two or more coats of synthetic enamel paint of approved required shade etc. complete to the entire satisfaction of Fire Officer. The measurement of pipe upto the level finish MS Pipe in the elbow.
7 3.01 25 mm dia. 30 Metre
8 3.02 80 mm dia. 30 Metre
9 3.03 100 mm dia. 50 Metre
10 3.04 150 mm dia. 45 Metre
11 3.05 200 mm dia. (6.35 mm thickness) 12 Metre
12 4 P/F/T/C of First Aid Hose Reel Drum ISI marked IS:884 swinging type finish with signal red paint duly fitted with thermo plastic reinforced flexible hose reel of ISI marked IS:12585/444 type II size 20 mm dia, 30 mtr. long of yellow / black colour with shut off nozel including dismantling of hose reel drum etc. complete with all respect to the entire satisfaction of Fire Officer. 15 Nos.
13 5 P/F/T/C of Hose Reel Tubing with thermo plastic reinforced 20 mm dia 30 metre long of yellow / black colour of high pressure ISI marked (IS:444) hose reel tubing type II in existing hose reel drum including dismantling of hose reel tubing etc. complete to the entire satisfaction of Fire Officer. 10 Nos.
14 6 Supplying and fixing Single Headed Stainless Steel Internal Hydrant Valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with 80 mm dia flanged inlet, cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap, chain and all accessories as required etc. complete to the entire satisfaction of Fire Officer.\n 4 Nos.
15 7 P/F/T/C of First Aid Hose Reel Drum ISI marked IS:884 swinging type finish with signal red paint including dismantling the same etc. complete with all respect to the entire satisfaction of Fire Officer. 12 Nos.
16 8 Providing, installation, testing and commissioning of Non-Return Valve of PN 1.6 of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required and complete in all respect to the entire satisfaction of Fire Officer.
17 8.01 65 mm dia. 4 Nos.
18 8.02 100 mm dia. 4 Nos.
19 8.03 150 mm dia. 4 Nos.
20 8.04 200 mm dia. 1 No.
21 8.05 80 mm dia. 4 Nos.
22 9 P/F/T/C of cast iron flanged ISI marked Sluice Valve class PN 1.6 complete with rubber insertion, nuts, bolts, washers and compression flanges complete as required of following sizes of Kirloskar Make including dismantling of NR valve with all respect to the entire satisfaction of Fire Officer:
23 9.01 65 mm dia. 3 Nos.
24 9.02 80 mm dia. 4 Nos.
25 9.03 100 mm dia. 2 Nos.
26 9.04 150 mm dia. 2 Nos.
27 9.05 200 mm dia. 2 Nos.
28 10 P/F/T/C of 15 mm dia Quartzoid Bulb Type Sprinkler to HD/Tyco make with tempreture rating 680C made out forged (brass and nickel) chrome finished UL listed pendent/side wall type including dismantling of 15 mm dia quartzoid etc. complete to the entire satisfaction of Fire Officer. " PENDENT TYPE" 35 Nos.
29 11 P/F/T/C of Lead Acid battery Exide/Amron/ Luminus ( Heavy Duty) make of 12 volts, 20 plats and 150 AH fully charged for operation of D.G.Set/Diesel driven pump installed fire pump room including battery terminator and connecting copper cables of approved quality and including dismantling battery etc. as required at site & making necessary connection complete in all respect to the entire satisfaction of Fire Officer. 5 Nos.
30 12 Complete servicing of Diesel driven fire engine of model DSM, Kirloskar make/Leyland make including replacement of air filter, fuel filter, oil filter by pass filter and packing including providing & fixing of servicing kit and replacement of engine oil as per capacity of fire engine of approved grade & quality including labour charges as required at site and making the diesel driven fire engine in proper working condition and complete in all respect to the entire satisfaction of Fire Officer.
31 12.01 60 to 100 HP 1 No.
32 12.02 More than 100 to 150 HP 1 No.
33 13 Rewinding of 3 Phase, 50 HZ 440 Volt monoblock/main pump set of 3000 RPM including providing, fixing / commissioning of insulated copper winding wire (Wire –ATLAS or equivalent) of required size and capacity ( bunt copper wire shall not be returned to the deptt.) with providing suitable grade varnish (Doctor back make or equivalent ), packing papers, sleeves etc. The work including dismantling of existing motor with proper tools, cartage charge & labour charges etc and providing and fixing of nuts bolt of required size and proper alignment of the entire satisfaction Fire Officer.
34 13.01 5 HP Capacity 2 Nos.
35 13.02 7.5 HP Capacity 2 Nos.
36 13.03 15 HP Capacity 1 No.
37 13.04 20 HP Capacity 1 No.
38 13.05 60 HP to 100 HP 1 No.
39 13.06 More than 100 HP to 150 HP 1 No.
40 14 Repairing of Jockey/main pump of following with replacement/repairing of mechanical seal, ball bearing, gun metal sleeve, impeller welding & smoothing of S.S. shaft, including carriage of heavy fire pump from pump room to the workshop by mechanical transport including loading, unloading through chain pully etc. and dismantling of pump set and refixing the same after repairing etc. complete to the entire satisfaction of Fire Officer.
41 14.01 5 / 7.5 HP 8 Nos.
42 14.02 15 / 20 HP 2 Nos.
43 14.03 60 HP to 100 HP 2 Nos.
44 14.04 More than 100 HP to 125 HP 2 Nos.
45 14.05 215 HP 1 No.
46 15 Dismantling, Repairing, Fixing and Servicing of D.G. Engine self changing of damaged armature and making connection to D.G. Fire Engine etc. complete to the entire satisfaction of Fire Officer. 100 HP to 150 HP 1 No.
47 16 P/F/T/C of Single Phase Preventor Relay for starter panel of 7.5/5 HP for three phase induction motor, 415 volt (6 wire) etc. complete to the entire satisfaction of Fire Officer. 2 Nos.
48 17 Replacement of Power Contactor various following sizes, 3 pole type ML/MNX, 415 volt, 50 Hz 125 AMP., L&T make or equivalent for electric panel of the starter for the fire pump motor including dismantling of power contactor and spare coil and replacing the same including connection, wiring thimbles including labour charges etc. complete to the entire satisfaction of Fire Officer.
49 17.01 ML - 2 2 Nos.
50 17.02 ML – 3 2 Nos.
51 17.03 ML – 4 2 Nos.
52 17.04 ML – 6 1 No.
53 17.05 MNX 12 8 Nos.
54 17.06 MNX 18 8 Nos.
55 17.07 MNX 22/MNX 25 6 Nos.
56 17.08 MNX 110 3 Nos.
57 18 P/F/T/C of various following type MCB, 3/4 Pole, 415 volt, 50 HZ type L&T/Schneider Electric make or equivalent including dismantling of burnt MCB, connection, wiring, thimble etc. complete to the entire satisfaction of Fire Officer.
58 18.01 32 Amp. 2 Nos.
59 18.02 63 Amp. 1 No.
60 19 P/F/T/C of Forged Brass Ball valve of approved quality with screwed inside etc. complete to the entire satisfaction of Fire Officer ( Zoloto/Sant Brand only)
61 19.01 25 mm dia. 20 Nos.
62 19.02 50 mm dia. 2 Nos.
63 20 Providing and Placing Water Storage Tank on terrace (at all floor level) ISI : 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and over flow pipe, but without fittings and the base support for tank complete as per the direction of Fire Officer. \n5,000 Ltrs. X 1 Tank = 5,000 Ltrs. 5000 Litre
64 21 Providing suitable foundation for Polyethylene Water Storage Tank 2.15 M dia with 0.15 M height. at terrace level with having CC 1:2:4 (1 cement : 2 Coarsened : 4 Stone aggregate of 20 mm nominal size) for placing the same at terrace level. The work included 12 mm cement plaster 1:3 (1 cement : 3 Coarsened) with a floating coat of neat cement including centering and shuttering required etc. complete to the entire satisfaction of Fire Officer. 1 No.
65 22 Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, C.I. compression flange, gaskets conforming to IS 13095 of following sizes as required etc. complete to the entire satisfaction of Fire Officer.:
66 22.01 65 MM Dia 1 No.
67 22.02 80 MM Dia 3 Nos.
68 22.03 100 MM Dia 4 Nos.
69 22.04 150 MM Dia 3 Nos.
70 23 P/F/T/C of DN2-250 M, 250 A, type MCCB, 3 pole Breaking Capacity Icu at 415 V, AC, 50 Hz (kA) L & T make including dismantling of burnt MCCB etc. complete to the entire satisfaction of Fire officer. 1 No.
71 24 P/F/T/C of Electro Megnatic relay of 25 Amp, 24 Volt 250 ohm for diesel engine of Kirti make including dismantling of burnt relay etc. complete to the entire satisfaction of Fire Officer. 1 No.
72 25 Providing and Fixing G.I. Union, band and socket etc. in G.I. pipe including cutting and threading the pipe and making long screws etc. complete to the entire satisfaction of Fire Officer.\na) 25 mm dia 5 Nos.
73 26 P/F/T/C of Tyre Coupling, rubber bush and fixing the pump in proper alignment, line and level by providing suitable size of nuts and bolts etc. complete to the entire satisfaction of Fire Officer.
74 26.01 20 HP Capacity 1 No.
75 26.02 Above 20 HP to 100 HP Capacity 1 No.
76 27 P/F/T/C of Star Coupling, rubber bush and fixing the pump in proper alignment, line and level by providing suitable size of nuts & bolts as required at site complete…….
77 27.01 Upto 20 HP Capacity 1 No.
78 27.02 Above 20 HP to 100 Hp Capacity 1 No.
79 28 P/F of Solenoisn Coil of superior quality for required size of main pumps including nuts, bolts, sleevs including oiling of coupling from pump including heavy labour etc. complete to the entire satisfaction of Fire Officer. a) 60 HP to 125 HP 1 No.
80 29 Dismantling of Damaged Radiator of Diesel Fire Pump of model DSM( Kirrlosker make & equivalent) and Providing / Fixing / Commissioning new radiator for suitable Diesel Fire Pump etc. complete to the entire satisfaction of Fire Officer. 1 No.
81 30 Painting and synthetic enamel paint of approved brand and manufacture of required colour to give and even shade One or more coats on old work etc. complete in all respect to the entire satisfaction of Fire Officer 1000 Square Metre
82 31 P/F/T/C of various Bimetel/Thermal Overload Relay over Contactor,/ ML/MNX, 415Volts. ,50Hz. L & T Make or equivalent ot the Electric Panel for monoblock/Jockey Pump including dismantling of connection, wiring, Relay etc. for proper wiring of Motor etc. complete to the entire satisfaction of Fire Officer/Engineer In-Charge.
83 31.01 MNX- 18/ MNX-22 ( 9 to 40 Amp.) 4 Nos.
84 31.02 MNX 25 ( 20 to 33 Amp.) 4 Nos.
85 32 Complete servicing and Fixing of Diesel Driven Fire Engine due to oil seal leakage and filling of water in the Fire Engine of model DSM, Kirloskar make including replacement of all filter kit, piston, piston ring, liner, rod, ring, head, gasket, seal set complete, thimble, Hose pipe, packing and repairing of bearing sets, pump injector etc. complete and providing & fixing items in the engine whenever necessary and replacement of engine oil (Castrol 40W) coolant as per capacity of fire engine of approved grade & quality including labour charges as required at site and making the diesel driven fire engine in proper working condition etc. complete to the entire satisfaction of Fire Officer. Above 100 HP 1 No.
86 33 Providing of Battery Charger suitable for double battery system of 180 AH of 12 volt/24 volt 25 plate heavy duty etc. complete to the entire satisfaction of Fire Officer.\n100 HP to 150 HP 2 Nos.
87 34 P/F/T/C of Kirloskar make KDS Monoblock Pump Set of 7.50 HP, 3 phase, 50 Hz, 3000 RPM, 440 Volts with CI impeller and mechanical seal fitted and having suction size 65 mm and delivery size 50 mm, the pump shall be end suction type with cast iron body including Common Base Plate made with M.S.Channel, Viberation Isolation Pad and Cement Concrete with plaster etc. complete to the entire satisfaction of Fire Officer. 1 Set
88 35 P/F/T/C of Electrical Control panel for terrace pump,wall mounted type, fabricated out of 16 swg. Thick CRCA sheet,compartmentalised with hinged lockable doors,dust and verminproof,powder coated of approved shade,cable alley,inter-connection,having switchgears and accessories mounting and internal wiring,earth terminals, numbering etc. complete in all respect,suitable to operat 10 HP Motor on 415 V + 10%, 3 Phase, 50 Hz. AC supply with enclosure protection class IP-55 etc. to the entire satisfaction of enginner in-charge / Fire oficer. 1 Set
89 36 Credit of dismantle battery including brass terminal required size and disconnection cables etc. nothing extra will be paid( dismantle battery shall be issued to the contractor as per market rate) 5 Nos.
90 37 Credit of unservicable material with cutting welding machine including cutting in wall/ slab whenever required and stacking of unserviciable material at site in al respect to the entire satisfaction of FO (dismantle material shall be issued to the contractor as per market rate)
91 37.01 M.S. Pipe, Hose Reel Drum etc. 3801.23 Kilogram
92 37.02 Brass fitting accessories 9 Kilogram
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail