Proposed ( G Plus 3 ) Storied Residential Building Including Electrical Works At Holdings No . 77/2 , Makardah Road , Howrah-711101 Under Hmc Ward No-22 , ( Block- A , Block-B , Block-C ) ( 3Rd Call ) .
Tender Value
7.94 Crore
Estimated cost
Bid Submission
25 Jan 2020
0 days left
EMD
15.89 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
HOWRAH → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed ( G Plus 3 ) Storied Residential Building Including Electrical Works At Holdings No . 77 / 2 , Makardah Road , Howrah-711101 Under Hmc Ward No-22 , ( Block- A , Block-B , Block-C ) ( 3Rd Call ) .
BOQ
| Name of Work: Proposed G+3 storied Residential Building at holding No. 77/2, Makardh Road, Howrah 711101 under HMC Ward No-22 (Block-A,Block-B,Block-C). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including moving,spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete | 3 | 1735 | %Cum |
| 2 | 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer\ncomplete. (Payment to be made on the basis of measurement of finished quantity of work)(P-1, It. No-3a) 1/3 of Item No.1 | 580.864 | %Cum | |
| 3 | 3 | (d) Treatment to the back filling of R.C.C. foundation\nwith chemical emulsion by admixing chloropyrofos\nemulsifiable concentrate (1% concentration) with\nwater by weight at the rate of 7.5 ltr. per sq.m. of the\nvertical surface of the substructure of each side of the\nfoundation. The work shall be carried out as per\nspecification as described in para 6.3.1 of code IS-\n6313 (part-II) 1981 (Mode of measurement will be per\nsq.m. of vertical area of foundation treated). | 3720 | Sqm. | |
| 4 | 4 | (c) Anti termite treatment to the top surface of the\nconsolidated earth within plinth walls with chemical\nemulsion by admixing chloropyrofos emulsifiable\nconcentrates (1% concentration) with water by weight\nat the rate of 5 Litres per sq. m. of the surface before\nsand bed or sub-grade is laid. Holes upto 50 mm. to\n75 mm. deep at 150 mm. centre to centre both ways\nshall be made with 12 mm, diameter mild steel rod on\nthe surface to facilitate saturation of the soil with the\nchemical emulsion. The work shall be carried out as\nper specification described in para 6.4 of code IS-\n6313 (part -II) 1981. ( Mode of measurment will be\nper Sq.m of plan area of plinth treated.) | 1130 | SqM | |
| 5 | 5 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(P-2, It. No-4a) | 6 | 864 | %Cum |
| 6 | 6 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand | 7 | 2330 | SqM |
| 7 | 7 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.\na) Pakur Variety | 240 | Cum | |
| 8 | 7.01 | 1st floor | 6 | Cum | |
| 9 | 7.02 | 2nd floor | 6 | Cum | |
| 10 | 7.03 | 3rd floor | 6 | Cum | |
| 11 | 8 | Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item .[cement to be supplied by the Manufacturer/ supplier]\nIn Ground Floor and Foundation. (ii) With approved concrete pump | 205 | Cum | |
| 12 | 9.01 | Supplying ready mixed concrete of M 20 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work, compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item.[Cement to be supplied by the Manufacturer or supplier] (ii) With approved concrete pump. In Ground Floor and Foundation | 222 | Cum | |
| 13 | 9.02 | first floor | 221 | Cum | |
| 14 | 9.03 | Second Floor | 221 | Cum | |
| 15 | 9.04 | Third Floor | 222 | Cum | |
| 16 | 9.05 | Fourth Floor | 26 | Cum | |
| 17 | 10 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge (f) 25 mm to 30 mm shuttering without staging in foundation | 1056 | sqm | |
| 18 | 10.01 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)25 mm to 30 mm thick wooden shuttering as per decision & direction ofEngineer-In-Charge | 2400 | Sqm | |
| 19 | 10.02 | (ii) Upto roof of 1st. Floor. | 1950 | Sqm | |
| 20 | 10.03 | (iii) Upto roof of 2nd. Floor. | 1950 | Sqm | |
| 21 | 10.04 | (iv) Upto roof of 3rd. Floor. | 1950 | Sqm | |
| 22 | 10.05 | (iv) Upto roof of 4th. Floor. | 355 | Sqm | |
| 23 | 11.01 | Reinforcement for reinforced concrete work in all sorts of structures\nincluding distribution bars, stirrups, binders etc initial straightening and\nremoval of loose rust (if necessary), cutting to requisite length, hooking and\nbending to correct shape, placing in proper position and binding with 16\ngauge black annealed wire at every intersection, complete as per drawing\nand direction. a) For works in foundation and upto roof of ground floor/upto 4 m\n(i) Tor steel/Mild Steel\nI. SAIL/ TATA/RINL | 47.5 | MT | |
| 24 | 11.02 | (b) For works of Ist floor Upto roof | 31.5 | MT | |
| 25 | 11.03 | (c) For works of 2nd floor Upto roof | 33.5 | MT | |
| 26 | 11.04 | (d) For works of 3th floor Upto roof | 33.5 | MT | |
| 27 | 11.05 | (e) For works of 4th floor Upto roof | 4.6 | MT | |
| 28 | 12 | Supplying, fitting and fixing Fan Hook for celling with 1 metre 16mm. Dia. Rod complete including mending damages . | 700 | Each | |
| 29 | 13.01 | Brick work with 1st class bricks in cement mortar (1:4)\n(a) In foundation and plinth | 55 | Cum. | |
| 30 | 13.02 | (b) In superstructure, ground floor | 12 | Cum. | |
| 31 | 14.01 | 1st class brickwork of width 200 mm. with non-modular bricks in cement and\nsand mortar (1:4)\n(a) In foundation and plinth b) In superstructure ground floor | 146 | Cum. | |
| 32 | 14.02 | (d) In Superstructure,1st. floor. | 172 | Cum. | |
| 33 | 14.03 | (d) In Superstructure,2nd. floor. | 172 | Cum. | |
| 34 | 14.04 | (e) In Superstructure,3rd. floor. | 172 | Cum. | |
| 35 | 14.05 | (f) In Superstructure,4th. floor. | 48 | Cum. | |
| 36 | 15.01 | 125 mm thick brickwork with 1st class bricks in cement mortar (4:1) (a) In ground floor | 963 | Sqm | |
| 37 | 15.02 | (b) In1st. floor. | 313 | Sqm | |
| 38 | 15.03 | (c) In2nd. floor. | 313 | Sqm | |
| 39 | 15.04 | (d) In3rd. floor. | 309 | Sqm | |
| 40 | 16 | Labour for Chipping of concrete surface before taking up Plastering work. | 6250 | Sqm | |
| 41 | 17.01 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or hamfering corners as directed andraking out joints including throating, nosing anddripcourse,scaffolding/staging where necessary (Ground floor).[Excludingcost of chipping over concrete surface]Outside:- with 1:6 cement mortar & 20 mm thick | 2528 | Sqm | |
| 42 | 17.02 | (b) In1st. floor. | 860 | Sqm | |
| 43 | 17.03 | (c) In2nd. floor. | 860 | Sqm | |
| 44 | 17.04 | (d) In3rd. floor. | 860 | Sqm | |
| 45 | 17.05 | (e) In4th. floor. | 266 | Sqm | |
| 46 | 17.06 | Inside:- with 1:6 cement mortar & 15 mm thick | 3645 | Sqm | |
| 47 | 17.07 | (b) In1st. floor. | 2505 | Sqm | |
| 48 | 17.08 | (c) In2nd. floor. | 2505 | Sqm | |
| 49 | 17.09 | (d) In3rd. floor. | 2505 | Sqm | |
| 50 | 17.1 | (e) In4th. floor. | 495 | Sqm | |
| 51 | 17.11 | (ii) With 1:4 cement mortar (c) 10 mm thick plaster | 560 | Sqm | |
| 52 | 17.12 | (b) In1st. floor. | 560 | Sqm | |
| 53 | 17.13 | (c) In2nd. floor. | 560 | Sqm | |
| 54 | 17.14 | (d) In3rd. floor. | 560 | Sqm | |
| 55 | 17.15 | (e) In4th. floor. | 175 | Sqm | |
| 56 | 18 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. | 265 | Sqm | |
| 57 | 19 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm\nthickness in floor, lobby, stair, landing & treads etc. over 20\nmm (av.) thck base of Cement mortar (1:2) laid with white\ncement slurry @ 4.4 kg/Sq.m before placing marble & jointed\nwith white cement slurry @ 2.0 kg/Sq.m with necessary\npigments including grinding and Granite polishing as per\ndirection of Engineering -in -Charge in Ground Floor. {White\ncement and Pigment to be supplied by the Agency] (b) With Chawk Dungri iv) Area of each slab/tile exceeding 1.00 sq.m (This item to be\nexecuted on Specific permission of Superintending Engineer) | 110 | Sqm | |
| 58 | 19.01 | 1st Floor | 325 | Sqm | |
| 59 | 19.02 | 2nd Floor | 325 | Sqm | |
| 60 | 19.03 | 3rd Floor | 325 | Sqm | |
| 61 | 20 | Extra cost of labour for prefinished and premoulded Nosing\nto treads of steps, railing, window sill etc. of Marble Stone | 550 | Meter | |
| 62 | 21 | Extra cost of labour for Marble Stone Floor in treads of Steps | 120 | Sq. M | |
| 63 | 21.01 | Supplying and laying true to line and level vitrified tiles of\napproved brand (size not less than 600 mm X 600 mm X 10\nmm thick) in floor, skirting etc. set in 20 mm sand cement\nmortar (1:4) and 2 mm thick cement slurry back side of tiles\nusing cement @ 2.91Kg./sqM or using polymerised adhesive\n(6 mm thick layer applied directly over finished artificial stone\nfloor/Mosaic etc without any backing course) laid after\napplication slurry using 1.75 Kg of cement per sqM below\nmortar only, joints grouted with admixture of white cement\nand colouring pigment to match with colour of tiles / epoxy\ngrout materials of approved make as directed and removal of\nwax coating of top surface of tiles with warm water and\npolishing the tiles using soft and dry cloth upto mirror finish\ncomplete including the cost of materials, labour and all other\nincidental charges complete true to the manufacturer's\nspecification and direction of Engineer-in-Charge. (White\ncement, synthetic adhesive and grout material to be supplied\nby the contrr]e)\nI\n(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand\ncement mortar (1:4) & 2 mm thick cement slurry at back side\nof tiles, 0.2 kg/ Sq.m white cement for joint filling with\npigment.\n(A) Deep Colour & White | 720 | sqm | |
| 64 | 21.02 | (a) In1st. floor. | 860 | sqm | |
| 65 | 21.03 | (b) In2nd. floor. | 860 | sqm | |
| 66 | 21.04 | (c) In3rd. floor. | 860 | sqm | |
| 67 | 22 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls\nand floors to match with the existing work & 4 nos. of key\nstones (10mm) fixed with araldite at the back of each tile &\nfinishing the joints with white cement mixed with colouring\noxide if required to match the colour of tiles including\nroughening of concrete surface, if necessary or by synthetic\nadhesive & grout materials etc.(B) Wall\nWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick\ncement slurry at back side of tiles using cement @ 2.91\nKg/Sq.m & joint filling using white cement slurry @\n0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m\n(i) Coloured decorative | 750 | sqm | |
| 68 | 22.01 | Supplying and laying true to line and level 20 mm / 25 mm.\nthick precast roof tiles made of cement conc. with stone chips\nas per approved strength and density set in 25mm avg. thick\ncement morter(1:3) and filling up joint (3 mm wide) with\ncement sand mortar (1:1) applying cement slurry @ 1.75 kg\nper Sq.m back of tiles and then settting close the precast\ntiles, finishing up the joints with slurry already laid and\nfinally finishing the top surface including providing 150 mm.\nhigh skirting with the same tiles flushed with the inside\nsurface of parapet wall,finishing the mouth of rain water\npipes, curving etc. as necessary complete as per direction of\nthe Engineer-in-charge. (Levelling if necessary may be paid\nseparately)\n(a) For 20 mm. thick precast tiles (cement 14.6 kg/ Sq.m for\nunderlayer) | 845 | Sqm | |
| 69 | 23.01 | a) M.S.or W.I. Ornamental grill of approved design joints\ncontinuously welded with M.S, W.I. Flats and bars of windows,\nrailing etc. fitted and fixed with necessary screws and lugs in ground\nfloor.(ii) Grill weighing above 16 Kg./sq.mtr and above | 0.7 | Qntl | |
| 70 | 23.02 | (b) In1st. floor. | 17.95 | Qntl | |
| 71 | 23.03 | (c) In2nd. floor. | 17.95 | Qntl | |
| 72 | 23.04 | (d) In3rd. floor. | 17.95 | Qntl | |
| 73 | 23.05 | (d) In4th. floor. | 0.7 | Qntl | |
| 74 | 24.01 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. | 12.1 | SqM | |
| 75 | 24.02 | (b) In1st. floor. | 33.68 | SqM | |
| 76 | 24.03 | (c) In2nd. floor. | 33.68 | SqM | |
| 77 | 24.04 | (d) In3rd. floor. | 33.68 | SqM | |
| 78 | 24.05 | (e) In4th. floor. | 19.25 | SqM | |
| 79 | 25 | Supplying fitting and fixing M.S. clamps for door and Window frame made of flat bent bar, end bifercated with nessary screws etc ,by cement concrete (4:2:1) as per direction. (cost of concrete willbe paid seperately). (a) 40 mm X 6 mm, 250mm length W1 | 150 | Each | |
| 80 | 26 | Supplying solid flush type doors of deluxe decorative (both side) quality,\nconforming to I:S 2202 timber frame consisting of top and bottom rail and side\nstyles of well seasoned timber 65mm wide each and the entire frame fitted with\n27.5mm wide battens places both ways in order to made the door of solid core\nand internal lipping with teak, mahogony or rose wood approved decorative\nveneers using phenol formaldehyde as glue etc. complete, including fitting, fixing\nthe shutters in position but excluding the cost of hinges and other fittings in\nground floor: (a) 35mm thick shutters (single leaf) | 145 | SQM | |
| 81 | 27.01 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals)Sal : Siliguri. | 0.61 | Cum. | |
| 82 | 27.02 | (a) In1st. floor. | 4 | Cum. | |
| 83 | 27.03 | (b) In2nd. floor. | 4 | Cum. | |
| 84 | 27.04 | (c) In3rd. floor. | 4 | Cum. | |
| 85 | 27.05 | (c) In4th. floor. | 1.75 | Cum. | |
| 86 | 28.01 | Panel shutters of door and window, as per design (each panel consisting of single\nplank without joint), including fitting and fixing the same in position but\nexcluding the cost of hinge and other fittings.\nIn ground floor.\n(In case of non-supply of single plank, penal rate of reduction of 20% will be\nmade)\n(i) 50mm thick shutters with 25mm thick panel of size 30 to 45 cm (a) 1st class best Indian teak. | 6.9 | Sq.M | |
| 87 | 28.02 | (a) In1st. floor. | 25.1 | Sq.M | |
| 88 | 28.03 | (b) In2nd. floor. | 25.1 | Sq.M | |
| 89 | 28.04 | (c) In3rd. floor. | 25.1 | Sq.M | |
| 90 | 28.05 | (c) In4th. floor. | 14.1 | Sq.M | |
| 91 | 29 | Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge.\n(b) Pre-laminated Colour. | 143 | M | |
| 92 | 30 | Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc profile . The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted profile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±) 1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm / welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30 mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers specifications and direction of Engineer-in- Charge. Factory made Single piece extruded PVC profiles door shutter of both side laminated wood grains decorative Finish: | 109.5 | SQM | |
| 93 | 31 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding\nWindow of all Aluminium sections viz. window frame (top,bottom & side\nframe), shutter (top, bottom, side & interlock member) made of aluminium\nalloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised\nconforming to IS 1868-1983, fitted with all other accessories viz. PVC\nroller, EPDM gasket, maruti lock, screws etc. including labour charges\nfor fitting & fixing of aluminium 2-track/3-track sliding window with\nfixing of glass (excluding cost of glass) all complete as per architectural\ndrawings and direction of Engineer-in-charge.\n10-12 Micron thickness Annodizing film\nNatural white For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr.\nand for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom\nand Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg\nper Mtr. and Interlock member @ 0.612 Kg per Mtr.\nFor 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr.\nand for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom\nand Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg\nper Mtr. and Interlock member @ 0.612 Kg per Mtr. | 455 | kg | |
| 94 | 32.01 | Wood work in upper rails of railing, hand rail of staircase, balcony etc. includig\nnecessary bend, moulding fitted and fixed complete (for purpose of payment\nsection will be measured in the square).\n(a) 1st class best Indian teak | 0.3 | Cum. | |
| 95 | 32.02 | (b) In1st. floor. | 0.3 | Cum. | |
| 96 | 32.03 | (c) In2nd. floor. | 0.3 | Cum. | |
| 97 | 32.04 | (d) In3rd. floor. | 0.3 | Cum. | |
| 98 | 33 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark . viii) 100mm. X 75mm. X 3.50mm. | 400 | Each | |
| 99 | 34 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured\nfrom extruded section conforming to I.S. specification (I.S. 2681/66) fitted and\nfixed complete.\n(i) 250mm x 16mm dia bolt. | 400 | Each | |
| 100 | 35 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with\n16mm dia rod with centre bolt and round fitting.\n(a) 200mm long | 450 | Each | |
| 101 | 36 | Iron door ring of approved quality fitted and fixed with nut and washers complete.50mm dia | 150 | Each | |
| 102 | 37 | (b) Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including\nfitting & fixing complete. | 45 | Each | |
| 103 | 38 | Anodised aluminium grip handle with base plate of approved quality fitted and\nfixed complete.\n(a) With base plate.\n(i) 165mm grip x 12mm dia rod x 42mm plate x 3.2mm thick. | 150 | Each | |
| 104 | 39 | 19 (i) Door stopper.(Brass) | 120 | Each | |
| 105 | 40 | Renewing 125mm long wooden buffer block ii) With Sal : Malayasian | 150 | Each | |
| 106 | 41 | 32 (a) Metallic magic eye of approved quality fitted and fixed complete. | 120 | Each | |
| 107 | 42 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm\ndia and 900mm height vertical balustrade at every two alternative\nsteps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal\nStrainless steel pipe and base/cover plate with Strainless Steel\nGRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat\nfinish, complete as per direction of the Engineer-in-charge.\nWeight of Strainless Steel railing per metre 6.5 Kg (approx) | 225 | M | |
| 108 | 43 | Applying interior grade acrylic primer of approved quality and brand on plastered or concrete or similer surface old or new surface to receive Distemper / Acrylic emulsion paint including scraping and prepairing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC.ii) Solvent based interior grade Acrylic Primer. In all floors.(b) Two Coatsii) Solvent based interior grade Acrylic Primer | 13140 | %SqM | |
| 109 | 44 | Applying Acrylic Emulsion Paint of approved make and brand on walls\nand ceiling including sand papering in intermediate coats including putty\n(to be done under specific instruction of Superintending Engineer) :\n(Two coats)ii) Luxury Quality | 13140 | SqM | |
| 110 | 45.01 | Applying Exterior grade Acrylic primer of approved quality and brand\non plastered or cencrete surface old or new surface to receive\ndecorative textured (matt finish) or smooth finish acrylic exterior\nemulsion paint including scraping and preparing the surface throughly,\ncomplete as per manufacturer's specification and as per direction of the\nEIC.\nIn Ground Floor:(b) Two Coats | 2537 | %SqM | |
| 111 | 45.02 | (b) In1st. floor. | 870 | %SqM | |
| 112 | 45.03 | (c) In2nd. floor. | 870 | %SqM | |
| 113 | 45.04 | (d) In3rd. floor. | 870 | %SqM | |
| 114 | 45.05 | (e) In4th. floor. | 640 | %SqM | |
| 115 | 46.01 | Protective and Decorative Acrylic exterior emulsion paint of approved\nquality, as per manufacturer's specification and as per direction of\nEngineer-in-Charge to be applied over acrylic primer as required. The\nrate includes cost of material, labour, scaffolding and all incidental\ncharges but excluding the cost of primer.\nIn Ground floor (Two Coat)\na) Normal Acrylic Emulsion | 1437 | SqM | |
| 116 | 46.02 | (b) In1st. floor. | 870 | SqM | |
| 117 | 46.03 | (c) In2nd. floor. | 870 | SqM | |
| 118 | 46.04 | (d) In3rd. floor. | 870 | SqM | |
| 119 | 46.05 | (e) In4th. floor. | 640 | SqM | |
| 120 | 47 | (b) Rendering the surface of walls and ceiling with white cement based\nwall putty of approved make and brand(1.5mm thick) | 11850 | SqM | |
| 121 | 48 | (a) Priming one coat on steel or other metal surface with synthetic oil\nbound primer of approved quality including smoothening surfaces by sand\npapering etc. | 150 | SqM | |
| 122 | 49 | P(A) Painting with best quality synthetic enamel paint of approved make\nand brand including smoothening surface by sand papering etc. including\nusing of approved putty etc. on the surface, if necessary :\n(a) On timber or plastered surface :\nWith super gloss (hi-gloss) -iv) Two coats (with any shade except white) Sq. | 150 | SqM | |
| 123 | 50 | French polishing to wood work including preparing surface (ordinary\ngloss)\n(a) On new wood work | 169.5 | Sqm | |
| 124 | 51.01 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to\nIS:13592-1992 with all necessary clamps nails, including making holes in\nwalls, floor etc. cutting trenches in any soil through masonry concrete\nstructures etc if necessary and mending good damages including joining with\njointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) completeA) UPVC Pipes:(ii) 110 mm. Dia. | 800 | M | |
| 125 | 51.02 | (c) UPVC Shoe. | 280 | Each | |
| 126 | 52 | Supplying & laying as per IRC-SP:063-2004 paver unit of any\nshade of approved quality as per relevant IS code, laid in\npattern as directed in pavement, footpath, driveway (paver\nblock only), etc including necessary underlay complete in all\nrespect with all labour and material.\n[Border concrete if necessary to be paid separately].\nNote: Sub-grade CBR should not be less than 5.c) 60 mm thick interlocking designer concrete paver block M-\n35 grade for light-traffic zone,commercial & office\ncomplex,tourist resort as per IS: 15658-2006 (over 20-40 mm\nmedium sand bed on 250mm thk WBM/ WMM base course &\n250 mm thk bound gnaular /granular sub-base course\nincluding cost of sand for sand bed but excluding cost of base\n,sub-base course & subgrade preparation(ii) Coloured Decorative | 1195 | SqM | |
| 127 | 53.01 | Supplying, fitting and fixing Black Stone slab used in Kitchen\nslab, alcove, wardrobe etc. laid and jointed with necessary\nadhesive Cement mortar (1:2) including grinding or polishing\nas per direction of Engineer-in -Charge in Ground Floor.(a) Slab Thickness 20 to 25 mm 1st floor | 26 | SqM | |
| 128 | 53.02 | (c) In2nd. floor. | 26 | SqM | |
| 129 | 53.03 | (d) In3rd. floor. | 26 | SqM | |
| 130 | 54 | Removal of rubbish,earth etc. from the working\nsite and disposal of the same beyond the\ncompound, in conformity with the Municipal /\nCorporation Rules for such disposal, loading into\ntruck and cleaning the site in all respect as per\ndirection of Engineer in charge | 400 | Cu.M | |
| 131 | 55 | Construction of septic tank of different capacities as per approved drawing with 1st\nclass brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole\ncover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick\nR.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1)\nwith neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1)\nto outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial\nstone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and\nfixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation\nearth in all sorts of soil, shoring, bailing out and pumping out water as necessary,\nramming, dressing the bed and fefilling the sides of the tanks with earth, removing\nspoils, filling up the chamber with clear water, removing foreign materials from the\nchamber and including constructing attached inspection pit as per approved drawing\nand connecting all necessary pipes, joints etc. with internal plaster work and artificial\nstone flooring is to be done with admixture of water proofing compound @ 0.5% by\nweight of cement with all costs of labour and materials. Note:- (i) Finished level of\nSeptic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm.\nVentilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part-\nI.Payment will be made separetly on the basis of actual height based on relevant\nI.S.Code.(v) For 100 users\nA) With Pakur variety. (SAIL/TATA/RINL) | 3 | Each | |
| 132 | 56 | Supplying, fitting and fixing with cement jointing (3:1) salt glazed\nstoneware pipe including excavation of earth upto 1.50 metre depth in all\nsorts of soil both mixed or unmixed and refilling (but excluding concreting\nat bottom and sidesii) 225 mm | 700 | Mtr. | |
| 133 | 57 | Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class\nbrick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick\ncement concrete with stone chips (1:3:6) including necessary earth work, fitting and\nfixing approved type S.W. master trap, constructing masonry invert with cement\nconcrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300\nmm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning,\nincluding supplying,fitting and fixing one 560 mm. dia R.C.C. manhole cover of\napproved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with\nstone chips including necessary reinforcement (upto 1%) and shuttering and\nnecessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm\nabove adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the\ntop slab as directed complete in all respect and removal of surplus earth with all\ncosts of labour and materials (excluding the cost of master trap only).\n(i) 900 mm X 750 mm (inside) chamber including fitting and fixing S.W. master\ntrap of 150 mm dia. of approved make\nA) With Pakur variety. (SAIL/TATA/RINL) | 3 | Each | |
| 134 | 58 | Supplying, fitting and fixing S.W. master trap.\n225 mm X 225 mm | 40 | Each | |
| 135 | 59.01 | Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/\n2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in\nthe wall, floor etc. and cutting trenches etc. in any floor through masonry\nconcrete, if necessary, and mending good damages with necessary jointing\nmaterials and painting two coats to the exposed surface with approved\npaint complete. (Measurement will be made along the center line of the\ntotal pipe line in fitted condition including specials,payment for specials &\nPainting will however be paid seperately).\n(a) With valamoid joints including sealing with sand cement morter (4:1)(i) 150 mm dia. (internal) | 400 | metre | |
| 136 | 59.02 | 100 mm dia. (internal) | 200 | metre | |
| 137 | 60 | Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S.\n3989/ 2009 and 1729/ 2002 including lead caulked joints and painting two\ncoats to the exposed surface. (Painting to be paid seperately(B) 'S' Trap(iv) 150 mm | 100 | Each | |
| 138 | 61 | Supplying, fitting and fixing cast iron extension pipes for using in Traps\nonly (connector) conforming to I.S.3989/2009 and 1729/2002 including\nlead caulked joints complete and painting two coats to the exposed surface\nwith approved paint complete. (Payment of Painting will however be paid\nseperately).\n(a) (i) 100 mm X 150 mm | 100 | Each | |
| 139 | 62 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of\napproved make complete in position with necessary bolts, nuts etc.\n(a) With 'P' trap | 62 | Each | |
| 140 | 63 | Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid seperately). \n100 mm dia. | 45 | Each | |
| 141 | 64 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P.\nhinges, rubber buffer and brass screws complete.\n(a) E.W.C.(iv) Bestolite (solid type) white | 62 | Each | |
| 142 | 65 | Supplying, fitting and fixing soap holder.\n(a) PTMT (Prayag or equivalent) | 58 | each | |
| 143 | 66 | Supplying, fitting and fixing towel rail with two brackets.\n(a) C.P. over brass\n(iii) 25 mm dia. and 750 mm long | 58 | Each | |
| 144 | 67 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick\nwith silvering as per I.S.I. specifications supported on fibre glass frame of\nany colour, frame size 550 mm X 400 mm | 87 | Each | |
| 145 | 68 | Supplying, fitting and fixing PTMT Smart Shelf of approved make of size\n300 mm | 63 | Each | |
| 146 | 69 | Supplying, fitting and fixing 10 litre porcelain low-down cistern of\napproved make with either side or bottom inlet, side overflow, brackets\ncomplete with all internnal PVC fittings.\nWhite | 63 | Nos | |
| 147 | 70 | Wash basin vitreous china of approved make (without fittings)\nsupplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood\nblocks and C.I. brackets including two coats of painting of C.I. brackets.\n(i) 450 mm X 300 mm size | 63 | each | |
| 148 | 71 | Supplying, fitting and fixing white vitreous china best quality approved\nmake wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,\nC.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar\ncock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved\nquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved\nquality P.V.C. connection pipe with heavy brass C.P. nut including\nmending good all damages and painting the brackets with two coats of\napproved paint.(iii) 630 mm X 450 mm size | 32 | each | |
| 149 | 72 | Supplying, fitting and fixing stainless steel sink complete with waste\nfittings and two coats of painting of C.I. brackets.\n(a) Sink only\n(i) 530 mm X 430 mm x 180 mm | 30 | each | |
| 150 | 73.01 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary\naccessories, specials viz. socket, bend, tee, union, cross, elbo, nipple,\nlongscrew, reducing socket, reducing tee, short piece etc. fitted with\nholder bats clamps, including cutting pipes, making threads, fitting, fixing\netc. complete in all respect including cost of all necessary fittings as\nrequired,jointing materials and two coats of painting with approved paint\nin any position above ground. (Payment will be made on the centre line\nmeasurements of total pipe line including all specials. No separate\npayment will be made for accesories, specials. Payment for painting will\nbe made seperately)\n(A) For Exposed Work(ii) 40 mm dia. medium quality\n | 550 | Mtr | |
| 151 | 73.02 | 80 mm dia. medium quality | 350 | Mtr | |
| 152 | 74 | Supplying, fitting and fixing shower of approved brand and make.\n(a) (i) Chromium plated round shower with revolving joint 100 mm dia\nwith rubid cleaning system (Equivalent to Code No. 542(N) & Model -\nTropical / Sumthing Special of ESSCO or similar brand). | 54 | each | |
| 153 | 75 | (g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/\nstop cock of approved brand and make, spray painted and tested to 21 kg\nper sq. cm.\n(ii) 20 mm | 130 | each | |
| 154 | 76 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) &\n513(B) & Model - Tropical / Sumthing Special of ESSCO or similar | 174 | each | |
| 155 | 77 | Supplying, fitting and fixing pillar cock of approved make.c) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of\nJAQUAR or equivalent). | 78 | each | |
| 156 | 78 | (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall\nHook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or\nsimilar). | 102 | each | |
| 157 | 79 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and\nmake tested to 21 kg per sq. cm. (for water lines only).(v) 40 mm dia | 40 | each | |
| 158 | 80 | Hire and labour charges for shoring work (including\nnecessary close plank walling, framing,\nEucalyptus/Jhou bulla piling, strutting etc) complete\nas per direction of the Engineer-in-charge for\nfoundation excavation (vertical surface are in contact\nwith supported earth is to be measured.) (This item\nshould be executed on specific direction of the\nEnginner in charge).(a) Depth upto 1.5 m. | 740 | SqM | |
| 159 | 81.01 | Applying decorative cement based paint of approved quality after\npreparing the surface including scraping the same thoroughly\n(plastered or concrete surface) as per manufacturer's specification.\nIn Ground floor:(iii) Two coats. | 740 | SqM | |
| 160 | 81.02 | 1st floor | 870 | SqM | |
| 161 | 81.03 | 2nd floor | 870 | SqM | |
| 162 | 81.04 | 3rd foor | 870 | SqM | |
| 163 | 82.01 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes\n& fittings conforming to IS-15778: 2007\n(A)(I) CPVC Pipes Class-1,SDR-11 (Dia)\n15 mm | 470 | Mtr | |
| 164 | 82.02 | 20 mm | 350 | Mtr | |
| 165 | 82.03 | 25 mm | 190 | Mtr | |
| 166 | 82.04 | 50 mm | 105 | Mtr | |
| 167 | 83.01 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992\n(A) (i) Single Socketed 3 Meter Length (a) 75 mm | 150 | Mtr | |
| 168 | 83.02 | (b) 110 mm | 100 | Mtr | |
| 169 | 83.03 | (c) 160 mm | 100 | Mtr | |
| 170 | 84 | Supply, Erection, testing & commissioning of LT panel comprising of the following items .i) Incommer MCCB FP 100 A - 02 no ii) Change over 4 pole 100 A - 01 no iii) Outgoing MCCB 63 A FP - 03 No, Outgoing MCCB 32 A FP - 04 no iv) Aluminium Bus bar TPN 150 A - 01 set v) Indication lamp - 06 no vi) Internal wiring -01 lot Vii) Analog voltmeter - 01 no viii) Analog ammeter -01 no ix) MS enclosure having 2 mm thick CRCA sheet and duly painted as directed by EIC. | 3 | no | |
| 171 | 85 | Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating Rating 100 A, Make :-L &T or equivelant. (On angle iron frame) | 6 | no | |
| 172 | 86 | Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating Rating 63 A, Make :-L & T . (On angle iron frame) | 6 | no | |
| 173 | 87 | Supplying and fixing sheet steel (16SWG) cable end box on TPN SFU enclosure with nuts bolts etc incl. powder coated painting. (For 63 A/125 A SFU) | 12 | no | |
| 174 | 88 | Supplying and fixing Sheet steel Main Switches on\nflat iron frame on wall (On flat iron frame) . 240V DP with fuse on L&N . Make :-Havells . | 36 | no | |
| 175 | 89 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) 4 Bar, 100A/125A, (for DG supply) . | 6 | no | |
| 176 | 90 | Supply and delivery of autometic change over with current limiter (SPN 4, 800 watt ) 30 A/4 Amp ACCL (Havells / Standard make) | 36 | each | |
| 177 | 91 | Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. ( 4 Way) | 36 | each | |
| 178 | 92 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2 + 4 way, make : Cabtree/ Approved make | 18 | no | |
| 179 | 93 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2 + 14 way, make : legrand/ Approved make | 36 | no | |
| 180 | 94 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & ' C ' characteristics on din rail of existing DBs and necessary connection , Rating 6-32 A, SP, make : Cabtree/ Approved make | 576 | no | |
| 181 | 95 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection, rating 40A,DP, make : Cabtree/ Approved make | 54 | no | |
| 182 | 96 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish (2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC) Average run 6 meter. | 1450 | no | |
| 183 | 97 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish. ( 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC) On Board. | 310 | no | |
| 184 | 98 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish. ( 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC) Average run 3 meter. | 340 | no | |
| 185 | 99 | Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction. (19mm dia 3mm thick Polythene Pipe) | 4800 | RM | |
| 186 | 100 | Supply & fixing Two way Circular Box & cover | 910 | no | |
| 187 | 101 | Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building work.19 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire. | 9500 | RM | |
| 188 | 102 | Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 25 mm, | 530 | RM | |
| 189 | 103 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (2 X 6 sqmm + 1 x 4.0 sqmm) | 360 | RM | |
| 190 | 104 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (2 X 4 sqmm + 1 x 2.5 sqmm) | 1620 | RM | |
| 191 | 105 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (2 X 2.5 sqmm + 1 x 1.5 sqmm) | 1470 | RM | |
| 192 | 106 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (3 X 1.5 sqmm) | 1960 | RM | |
| 193 | 107 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.) | 125 | no | |
| 194 | 108 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) without plug top on 2 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F2 module board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.) | 94 | no | |
| 195 | 109 | Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.\n | 94 | no | |
| 196 | 110 | Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. | 162 | no | |
| 197 | 111 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. | 162 | no | |
| 198 | 112 | Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works (100 mm x 100 mm x 65 mm) | 92 | no | |
| 199 | 113 | Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works (150 mm x 100 mm x 65 mm) | 102 | no | |
| 200 | 114 | Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works (200 mm x 150 mm x 65 mm) | 60 | no | |
| 201 | 115 | Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) on existing GI Modular board having top cover plate and making necessary connections as required. | 44 | no | |
| 202 | 116 | Supply and fixing of 2 modular box with top cover and TV cable socket.(Rs 52+59+81 = 192) . | 33 | no | |
| 203 | 117 | Supply and delivery of unarmoured telephone cable, Havells Make i) Single pair | 1000 | mtr. | |
| 204 | 118 | ii) 10 pairs | 300 | mtr. | |
| 205 | 119 | Supplying and laying of CA TV co-axial cable RG 11 through the existing prelaid polythin pipe. (Havells / Standard make) | 1000 | mtr. | |
| 206 | 120 | Supply and delivery , installation of Panasonic / approved make Smart IP EPABX system. | 3 | each | |
| 207 | 121 | a) Supply, delivery and installation of 10 pairs DP Box | 18 | each | |
| 208 | 122 | MFD with Krone Module and Connecting Patch Cable for System. | 12 | item | |
| 209 | 123 | Supply Installation, Testing and Commissioning of Digital Phone (32Key). | 5 | No | |
| 210 | 124 | Supply and delivery of 1.1 KV Gr. Aluminium conductor XLPE insulated Armoured PVC outer sheathed power cable conforming to IS: 7098(part-1) (Make : Gloster/Havells)Approved make 3.5 Core 50 Sq. mm. Cable. | 750 | mtr | |
| 211 | 124.01 | 4 Core 16 Sq. mm. Cable. | 610 | mtr | |
| 212 | 124.02 | 2 Core 10 Sq. mm. Cable. | 2250 | mtr | |
| 213 | 124.03 | 2 Core 6 Sq. mm. Cable. | 1020 | mtr | |
| 214 | 125 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 2 Core 6 sq.mm. | 60 | Sets | |
| 215 | 125.01 | 2 Core 10 sq.mm. | 80 | Sets | |
| 216 | 125.02 | 4 Core 16 sq.mm. | 16 | Sets | |
| 217 | 125.03 | 3.5 Core 50sq.mm. | 20 | Sets | |
| 218 | 126 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 Core 6 sq.mm. | 60 | Sets | |
| 219 | 126.01 | 2 Core 10 sq.mm. | 80 | Sets | |
| 220 | 126.02 | 4 Core 16 sq.mm. | 16 | Sets | |
| 221 | 126.03 | 3.5 Core 50sq.mm. | 20 | Sets | |
| 222 | 127 | Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring\nsurface duly rammed | 750 | mtr. | |
| 223 | 128 | Laying of cable as below, after cutting floor/ pavement /wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. emoving the rubbish - From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc. | 2310 | mtr. | |
| 224 | 129 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting | 1000 | mtr. | |
| 225 | 130 | Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire. Up to 50 sqmm | 570 | mtr. | |
| 226 | 131 | Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS uspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. 200x50x1.25mm (18SWG) | 180 | mtr. | |
| 227 | 132 | Supply fitting fixing LED Glowsign board (8ft. X 4 ft.) (32 sq.ft.) to be installed at the entarnce as per actual site condition as directed by EIC. (3 sets) | 96 | sq.ft. | |
| 228 | 133 | Supplying & fixing medium gauge GI Pipe (ISI-Medium) protection with necessary fittings and jointing materials as required. (for 50 mm dia) | 280 | Mtr. | |
| 229 | 134 | (a) Supply & Delivery of 19mm Green Wooden Ply (water proof) required for main switch fixing for cable connection in Meter Room (CESC Meter) flat main line cable run, 2.23 Sq. Mtr. i.e. (6 ft X 4 ft) each, total 3 nos. with carrying etc. as required. | 30 | Sq. Mtr. | |
| 230 | 135 | (b) Supply & Delivery of fast, nut bolts, screws etc. as required. | 3 | Sets | |
| 231 | 136 | upply & delivery of 125 KVA Acoustic Enclosed D.G. Set with Microprocessor based manual control panel. 'Greaves' make coupled to a \"Crompton Greaves / Mecc alte\" make Alternator, Engine Model : 4G11TAG26 | 1 | No | |
| 232 | 137 | Supply, Delivery and fixing of Sub mersible pump 3 h.p. (Model No. 4VO30RH3) , Crompton Make. | 3 | each | |
| 233 | 138 | Supply, Delivery of Sub mersible pump control panel (Model No. ospc3) , Crompton Make. | 3 | each | |
| 234 | 139 | Fixing only starters (for motor control) on flat iron frame / angle iron frame on wall . Direct on Line starter for motor (upto 5 HP) | 3 | each | |
| 235 | 140 | Supply, Delivery and laying of 4sqmm sub mersible cable | 250 | mtr. | |
| 236 | 141 | Supply and delivery of 18 W LED Tube, Ultra Line LED Batten type, Make : Magik / Approved make | 50 | No | |
| 237 | 142 | Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required | 50 | No | |
| 238 | 143 | Supply fitting fixing of 415V street light timer control panel (Make- Havells / Approved make) | 5 | no | |
| 239 | 144 | Supply & delivery of LED 30 W Solis Street Light. Make: Magik / Approved make | 50 | each | |
| 240 | 145 | Supply & delivery 0f LED Post Top Globestar 12 W as gate light. Make : Surya / as approved by EIC. | 10 | each | |
| 241 | 146 | Supply & delivery of Antique LED 20 W Bollard . Make : Magik Brand / As approved by EIC (5500+450) | 30 | no | |
| 242 | 147 | Supply & delivery of 20 W LED Post Top Bright Yard (Clear) Make : Magik / as approved by EIC. | 75 | each | |
| 243 | 148 | Erection of LED Bollard with earth cutting & foundation base having dimension 200mm X 200mm X 450mm with M20 concrete and shuttering as required. | 30 | each | |
| 244 | 149 | Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set. | 30 | Set | |
| 245 | 150 | Supply and delivery of 12 watt LED surface mounted light with surface ring. Aura Slim Plus Panel Round. Make: Magik / Approved make | 210 | no | |
| 246 | 151 | Fixing only bracket light/bulk head light fitting on wall/ceiling by screw etc. | 210 | no | |
| 247 | 152 | Supply & delivery of LED 10 watt Atlantis Flood light of Magik Brand. Make: Century LED Ltd. /Approved make | 6 | each | |
| 248 | 153 | Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required. | 91 | each | |
| 249 | 154 | Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated & sheathed wire (single core) partly in GI conduit & partly through above bracket from OH line to the fitting, without control switch, incl. making connections and painting. | 50 | no | |
| 250 | 155 | Supply & delivery 300 mm sweep ventil Air DS exhaust fan(Metal type), Havells make | 4 | no | |
| 251 | 156 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: | 4 | no | |
| 252 | 157 | Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 300 mm. | 4 | no | |
| 253 | 158 | Supplying and fixing of GI water proof type looping cable box size 200 X 150 X 100 mm deep having 4 mm thick comprising of one no 240 V, 15 A kit kat fuse unit /MCB one NL on porceline insulator one compression type brass cable gland for upto 2/4 core 16 sqmm PVC/XLPE Al cable having lined with rubber gasketted GI top cover with brass machine screw etc.earthing trminal with lug on steel tubular pole near base including s&f 40 X 6 mm thick MS clamp with bolt,nut etc including painting with anti corrosive paint. | 40 | no | |
| 254 | 159 | Excavation of soil for installation of Earth Electrode and filling\n& ramming.\n(a) For Soft Soil | 72 | cum | |
| 255 | 160 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:\n(a) By ISI-Medium GI pipe | 24 | no | |
| 256 | 161 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe | 24 | set | |
| 257 | 162 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode | 24 | set | |
| 258 | 163 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. 10 SWG. | 640 | mtr | |
| 259 | 164 | Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. | 350 | mtr | |
| 260 | 165 | Supply of 5 spike lightning prong made by copper with atleast 1 feet extension as directed by EIC. | 12 | no | |
| 261 | 166 | G.S.T @12% for the items from Sl no. 1 to 83,85 to 89, 91 to 116, 125 to 131, 133 to 142, 149,151,153,154,156 to 164 on Rs. 66694639.22 | 1 | each | |
| 262 | 167 | Labour welfare cess @1% from Sl no. 1 to 166 on Rs.78671888.93 | 1 | each |
AI Tender Summary
Tender Timeline
Jan 02, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 25, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 27, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender