Name of Work:-SITC of knife gate valve of set no.1,2,3 & 6 at Jasola SPS
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1.01
Supply of 350mm Dia swift operating Ductile Iron Non Rising Type with open / close Indication having visible SS304 Shutter while operating Knife Gate with SS CF8 Steel retainer ring, EPDM seal, SS 304 Knife Gate to cut solid particles for complete closure, SS 410 ASTM A 276 Spindle, Brass spindle nut, SS 304 Fastener and carbon steel epoxy painted with MS hand wheel. Make: JASH/IVC\n
item1
2
Nos
2
1.02
Supply of 300mm Dia swift operating Ductile Iron Non Rising Type same as above. Make: JASH/IVC
item2
2
Nos
3
1.03
Supply of 250mm Dia swift operating Ductile Iron Non Rising Type same as above. Make: JASH/IVC
item3
4
Nos
4
1.04
Supply of MS Gap Piece of 350mm Dia of suitable length welded flanged at both ends with suitable drillings.
item4
4
Nos
5
1.05
Supply of MS Gap Piece of 300mm Dia of suitable length welded flanged at both ends with suitable drillings.
item5
4
Nos
6
1.06
Supply of MS Gap Piece of 250mm Dia of suitable length welded flanged at both ends with suitable drillings.
item6
4
Nos
7
1.07
Fabrication / supply of 250mm Dismantle joint with flange drilled as per KGV on one end and flanges at other.
item7
4
Nos
8
1.08
Supply of semi synthetic Rubber insertion sheet for Gap Piece, KGV and delivery/ suction line.
item8
32
Nos
9
1.09
Supply of Nut bolts and washers.
item9
250
Kg
10
1.1
Dismantling of Old 250mm/350mm dia Sluice valve, MS Pipe, NRV etc from the existing suction and delivery system by cutting old, jammed nut bolts with help of gas cutters and heavy manual labour, dewatering with Submersible pumps and taking out all the parts from the line up to the ground level with Crane using all safety precautions to avoid any accident at site.
item10
4
Jobs
11
1.11
Installation of New KGV 250mm/350mm, MS Gap piece, dismantle joint, NRV with nut bolts, rubber packing in existing line after cleaning the surface and flanges with chemical, scrapper and emery paper. The job includes assembling all parts as mentioned above by manual labour and installing them.
item11
4
Jobs
12
1.12
Repairing, strengthening and Painting of RCC Foundation, Gap piece, Dismantle joints etc with 1 coat of red oxide anti rust primer and 2 Coats of Enamel paint.
item12
4
Jobs
13
1.13
Testing, commissioning of line on pressure on full load and making good of leakage or problem if any.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.