Construction Of Nirbhaya Centre ( One Stop Centre ) At Balrampur .
Tender Value
37.32 Lakhs
Estimated cost
Bid Submission
10 Jan 2020
0 days left
EMD
3.73 Lakhs
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BAHRAICH → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Nirbhaya Centre ( One Stop Centre ) At Balrampur .
BOQ
| Name of Work : CONSTRUCTION OF NIRBHAYA CENTRE (ONE STOP CENTRE) AT BALRAMPUR. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in exacavation in foundation in ordinary soil including lift upto 1.5 m and lead upto 30m. and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 30 m. | BI01010001010000000000000515BI0100001113 | 86.2933 | CUM |
| 2 | 2 | Filling with avilable earth in trenches, plinth, sides of foundation, etc.in layers not exceeding 20 cms in depth consolidating each deposited layer by ramming and watering including lead upto 50m and lift upto 1.5m. | BI01010001010000000000000515BI0100001114 | 60.4053 | CUM |
| 3 | 3 | Carted of earth (15 Km) in trenches, plinth, sides of foundation, etc.in layers not exceeding 20 cms in depth consolidating each deposited layer by ramming and watering including lead upto 50m and lift upto 1.5m. | BI01010001010000000000000515BI0100001115 | 25.888 | CUM |
| 4 | 4 | Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead upto 50 mt.and lift upto 1.5 m excluding cost of sand | BI01010001010000000000000515BI0100001116 | 9.9894 | CUM |
| 5 | 5 | Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded brickaggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors. | BI01010001010000000000000515BI0100001117 | 25.5208 | CUM |
| 6 | 6 | Same as item 5.0 above but 1:6:12 | BI01010001010000000000000515BI0100001118 | 0.66194 | CUM |
| 7 | 7 | Providing and injecting chemical emulsion for pre-constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction surrounding of pipe sand conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (Part-II-1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or chordance will be used.The rate of application of chemical emulsion shall be as follows : \n(a) Treatment of soil under apron along external perimter 5 liters/100 sqm. | BI01010001010000000000000515BI0100001119 | 110 | CUM |
| 8 | 8 | R.C.C. work with cement approved coarse sand and 2 cm (3/4\") gauge approved stone ballast in the proportion 1:1.5:3 (1 cement :1.5 coarse sand : 3 aggregates) , in raft foundation and footings excluding supply of reinforcement and its bending the same with 24 WG binding wire and necessary centring and shuttering etc and also including supply of all materials labour and tools and plants etc. required for proper completion of the works. Strength of the concrete shall not be less than with M-20 concrete nominal mix | BI01010001010000000000000515BI0100001120 | 18.478 | CUM |
| 9 | 9 | Same as above item 8 but in Plinth beam | BI01010001010000000000000515BI0100001121 | 5.26891 | CUM |
| 10 | 10 | R.C.C. work with cement approved coarse sand and 2 cm (3/4\") gauge approved stone ballast in the proportion 1:1.5:3 (1 cement :1.5 coarse sand : 3 aggregates) , in lintels of doors and windows excluding supply of rienforcement and its bending the same with 24 WG binding wire and necessary centring and shuttering etc and also including supply of all materials labour and tools and plants etc. required for proper completion of the works. Strength of the concrete shall not be less than M-20.nominal size | BI01010001010000000000000515BI0100001122 | 1.1799 | CUM |
| 11 | 11 | As in item 9.0 above but in lighter Beams having spans upto six meter nominal size with M-20 concrete nominal size | BI01010001010000000000000515BI0100001123 | 9.57497 | CUM |
| 12 | 12 | As in item 9.0 above but in SLAB in M 20 concrete with M-20 concrete nominal size | BI01010001010000000000000515BI0100001124 | 16.9005 | CUM |
| 13 | 13 | R.C.C. work with cement approved coarse sand and 2 cm (3/4\") gauge approved stone ballast in the proportion 1:1.5:3 (1 cement :1. coarse sand : 2 aggregates) , columns excluding supply of rienforcement and its bending the same with 24 WG binding wire and necessary centring and shuttering etc and also including supply of all materials labour and tools and plants etc. required for proper completion of the works. Strength of the concrete shall not be less than M-20 nominal size | BI01010001010000000000000515BI0100001125 | 15.81 | CUM |
| 14 | 14 | Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in an over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. | BI01010001010000000000000515BI0100001126 | 67.3013 | CUM |
| 15 | 15 | Class 150 brick work in 1:6 cement and coarse sand in foundation and plinth including supply of all materials, labour and tools and plants etc.required for proper completion of the work. | BI01010001010000000000000515BI0100001127 | 14.1367 | CUM |
| 16 | 16 | Same as in item no. 15 above but in super-structure including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall one brick thick. 1:4Ground Floor | BI01010001010000000000000515BI0100001128 | 60.3078 | CUM |
| 17 | 17 | Same as in item no. 15 but in 1:3 cement and coarse sand mortar in super structure for wall thickness 4.5\" thick . Ground Floor | BI01010001010000000000000515BI0100001129 | 9.39895 | CUM |
| 18 | 18 | Terrace | BI01010001010000000000000515BI0100001130 | 4.33941 | CUM |
| 19 | 19 | External Plastering 15mm thick plaster with cement mortar in proportion of 1:6cement & coarse sand of 1.5-2.00 FM along for external walls PWD 586 | BI01010001010000000000000515BI0100001131 | 326.489 | CUM |
| 20 | 20 | Internal Plastering 15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 1.5-2.00 FM along for internal walls PWD 586 | BI01010001010000000000000515BI0100001132 | 556.642 | CUM |
| 21 | 21 | Column Plastering with cement mortar in proportion of 1:4 cement & coarse sand of 1.5-2.00 FM for cealing and add for extra labour of plaster (1)1 cement : 4 c sand | BI01010001010000000000000515BI0100001133 | 124.48 | CUM |
| 22 | 22 | Providing and laying vitrified floor tiles in different sizes ( design, thickness & specifications asper Architectural drawing) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. (a) Size of Tile 60x60 cm | BI01010001010000000000000515BI0100001134 | 113.424 | CUM |
| 23 | 23 | Providing and laying vitrified floor tiles in different sizes ( design, thickness & specifications asper Architectural drawing) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.\n(a) Size of Tile 60x60 cm | BI01010001010000000000000515BI0100001135 | 14.311 | CUM |
| 24 | 24 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).\nDark shade | BI01010001010000000000000515BI0100001136 | 4.05 | CUM |
| 25 | 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001137 | 13.545 | CUM |
| 26 | 26 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001138 | 51.135 | CUM |
| 27 | 27 | DOOR / WINDOW WORK Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work. | BI01010001010000000000000515BI0100001139 | 57.6 | CUM |
| 28 | 28 | Providing & fixing pressed steel door frames confirming to IS:4351 manufactured from commercial mild steel sheet of 1.25 mm thickness incluing hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.25 mm presse mild steel welded or rigidly fixed together by mechanical means, adustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strikeplate and shock absorbers as specifie and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge.\n(a) Profie B | BI01010001010000000000000515BI0100001140 | 108.3 | CUM |
| 29 | 29 | Providing and laying in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in holdfast fixing, in Pressed steel chaukhat and curing complete, including cost of form-work. | BI01010001010000000000000515BI0100001141 | 0.5595 | CUM |
| 30 | 30 | Supply of Dash Fastener | BI01010001010000000000000515BI0100001142 | 88 | CUM |
| 31 | 31 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete\nas per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | BI01010001010000000000000515BI0100001143 | 244.8 | CUM |
| 32 | 32 | Providing and fixing aluminium work for doors, windows, ventilators and partitions extruded built up standard Tubelar section/ appropriate Z section and other section of approved make confirming to IS 733 and IS 1285 , fixing with dash fastner of required dia ans size including necessary filling of the gap at junctions, i.e. at top, bottom and side with required EPDM rubber neoprene gasket aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing , panelling, C.P. brass/ stainless steel screw all complete as per architectural drawing and the direction of engineer in charge\nPowder coated aluminium ( minimum thickness powder coating 50 micron) for fixed porttion i.e. door/ window frames | BI01010001010000000000000515BI0100001144 | 120.15 | CUM |
| 33 | 33 | Providing and fixing aluminium work for doors, windows, ventilators and partitions extruded built up standard Tubelar section/ appropriate Z section and other section of approved make confirming to IS 733 and IS 1285 , fixing with dash fastner of required dia ans size including necessary filling of the gap at junctions, i.e. at top, bottom and side with required EPDM rubber neoprene gasket aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing , panelling, C.P. brass/ stainless steel screw all complete as per architectural drawing and the direction of engineer in charge\nPowder coated aluminium ( minimum thickness powder coating 50 micron) for openable porttion i.e. door/ window frames | BI01010001010000000000000515BI0100001145 | 146.88 | CUM |
| 34 | 34 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the drg with float glass panes of 4mm thickness (a) 4 mm thick | BI01010001010000000000000515BI0100001146 | 24.48 | CUM |
| 35 | 35 | Providng and fixing ISI marked flush door shutters confirming to IS 2202 ( Part I) non decorative type core of block board construction with frame of first class hard wood and well matched commercial three ply veneering with vertical grains or cross bands and face veneer on both face of shutters\n(a) 35mm thick including ISI marked stainless steel butt hinge with necessary screws | BI01010001010000000000000515BI0100001147 | 23.31 | CUM |
| 36 | 36 | (b)Extra for providing and fixing flush door with decorative veneering instead of non decorative ISI marked flush door shutters confirming to IS :2202 (Part I) | BI01010001010000000000000515BI0100001148 | 46.62 | CUM |
| 37 | 37 | Providing and fixing stainless steel (Grade 304) railing made of hollow tubes channels, plates etc. including welding grinding, buffering, polishing making curvature wherever required and fitting the same with necessary stainless steel nut and bolt complete including fixing the railing with necessary acessaries complete in all respects Steel Railing | BI01010001010000000000000515BI0100001149 | 28.8 | CUM |
| 38 | 38 | Fixing of Door, windows/ventilators chaukhats in position. \n(a) Window chaukhats | BI01010001010000000000000515BI0100001150 | 12 | CUM |
| 39 | 39 | (b) Ventilator chaukhats | BI01010001010000000000000515BI0100001151 | 12 | CUM |
| 40 | 40 | Providing and fixing Aluminium sliding door bolts ISI marked anodised( (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. ( a) 300x16 mm. | BI01010001010000000000000515BI0100001152 | 12 | CUM |
| 41 | 41 | Providing and fixing Aluminium sliding door bolts ISI marked anodised( (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. (b).250x16 mm. | BI01010001010000000000000515BI0100001153 | 12 | CUM |
| 42 | 42 | Providing and fixing Aluminium tower bolts ISI marked anodised( (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete.300x10 mm. | BI01010001010000000000000515BI0100001154 | 12 | CUM |
| 43 | 43 | Providing and fixing Aluminium tower bolts ISI marked anodised( (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete.200x9 mm. | BI01010001010000000000000515BI0100001155 | 12 | CUM |
| 44 | 44 | Providing and fixing Aluminium handles ISI marked anodised( (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary scrtews etc. complete. 150 mm. | BI01010001010000000000000515BI0100001156 | 24 | CUM |
| 45 | 45 | Providing and fixing Aluminium hanging floor door stoper ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin rubber stoper | BI01010001010000000000000515BI0100001157 | 12 | CUM |
| 46 | 46 | Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm)\nover and including priming coat of exterior primer applied\n@ 2.20kg/10 sqm | BI01010001010000000000000515BI0100001158 | 326.489 | CUM |
| 47 | 47 | Wall painting ( Two coat ) with plastic emulsion paint of aproved brand and manufacture on decorative wall surface to give an even shade including thoughly brushing the surface clean of all dirt grease loose pieces and prepared smooth. | BI01010001010000000000000515BI0100001159 | 681.122 | CUM |
| 48 | 48 | Providing & applying Birla putty of Av. 1. mm thickness over plastered surface to prepare the surface even & smooth complete | BI01010001010000000000000515BI0100001160 | 1007.61 | CUM |
| 49 | 49 | P/A synthietic enamal paint including primer over steel surface | BI01010001010000000000000515BI0100001161 | 23.31 | CUM |
| 50 | 50 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS :2645 and approved by engineer- in- charge d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4(1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern 300 X300 mm square 3mm deep.e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above oprerations to be done in order and as directed and specified by Engineer-in-charge\nWith average thickness thickness of 120 mmand minimum thickness at khurra as 65 mm. | BI01010001010000000000000515BI0100001162 | 110 | CUM |
| 51 | 51 | Sand cast iron plain shoes 150mm dia pipe | BI01010001010000000000000515BI0100001163 | 100 | RM |
| 52 | 52 | Providing lead caulked joints to sand cast iron rainwater pipes & fitting 150 mm dia | BI01010001010000000000000515BI0100001164 | 20 | Nos |
| 53 | 53 | Providing and fixing M.S. holder bar clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1.2.4 mix (1 Cement : 2 Coarse sand : 4 Graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good thewalls etc. | BI01010001010000000000000515BI0100001165 | 5 | Nos |
| 54 | 54 | P/F C.I. shoe for rain water pipe 150 mm | BI01010001010000000000000515BI0100001166 | 5 | Nos. |
| 55 | 55 | P/F C.I. door band rain water pipe 150 mm | BI01010001010000000000000515BI0100001167 | 5 | RM |
| 56 | 56 | P/F of G.I. pipe 80 mm dia along parapet | BI01010001010000000000000515BI0100001168 | 40.98 | RM |
| 57 | 57 | 40 mm thick 1:2:4 plain cement concrete floor with approved coarse sand and 2 cm (3/4\") graded approved stone laid in panels finished with 3 mm flooring coat of neat cement and mrble dust in 5:1 as specified with out base concrete PWD SI No.605 | BI01010001010000000000000515BI0100001169 | 56.601 | CUM |
| 58 | 58 | Wiring points & Submains:- Wiring point for light with 1.0sq mm FR P.V.C. insulated multistrand single core copper conductor cable in P.V.C. conduit with 1.5 sqm FR P.V.C. insulated multistrand copper conductorcable as earth wire drawn inside,piano type switch and ceiling rose on 3mm phenolic laminated bakelite sheet etc. | BI01010001010000000000000515BI0100001170 | 17 | CUM |
| 59 | 59 | Same as in item no. 1 but for fans and Fresh Air fans (light duty fan). | BI01010001010000000000000515BI0100001171 | 13 | CUM |
| 60 | 60 | Wiring point for plug with 1.0 sqmm FRPVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit concealed in the wall , complete with 14SWG copper earth continuity wire, piano type switch and socket etc. complete in all respects including matching colour wash.Same as above wiring point for plug with 1.0sq mm FR P.V.C. insulated multistrand single core copper conductor cable as earth wire drawn inside the conduit | BI01010001010000000000000515BI0100001172 | 15 | CUM |
| 61 | 61 | Wiring point for exhaust fan with 1.0 sqmm FRPVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit concealed in the wall, complete with 14SWG copper earth continuity wire, 15 A piano type switch, ceiling rose on 3mm thick phenolic laminated bakelite sheet etc. complete in all respect including matching colour wash Same as above but in PVC conduit with 1.5sq mm FR P.V.C. insulated multistrand single core copper conductor cable as earth wire drawn inside the conduit | BI01010001010000000000000515BI0100001173 | 5 | CUM |
| 62 | 62 | Mains & Sub-mains Supply & wiring of sub-main with 2Nos of 6sqmm FRPVC insulated 1100V grade multistrand single core copper conductor cable in 20mm dia heavy gauge rigid steel conduit concealed in wall, complete with 1No. 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect. Same as above but in 20mm dia heavy duty( 2mm thick) PVC conduit with 1No. 2.5 Sqmm. FRPVC insulated multistrand copper conductor cable as earth continuty wire drawn in conduit. (Lumpsum quantity has been taken in consideration) | BI01010001010000000000000515BI0100001174 | 40 | CUM |
| 63 | 63 | Same as above but in 20mm dia heavy duty( 2mm thick) PVC conduit with 1No. 2.5 Sqmm. FRPVC insulated multistrand copper conductor cable as earth continuty wire drawn in conduit. (Lumpsum quantity has been taken in consideration) | BI01010001010000000000000515BI0100001175 | 30 | CUM |
| 64 | 64 | Supply and Fixing of 32 A 240 V DP metal clad rewireable type switch fuse unit of M.D.F.E.G./ teak wood board complete in all respect for Sodium Lamp on pole\nCAT. B | BI01010001010000000000000515BI0100001176 | 1 | CUM |
| 65 | 65 | Supply and Fixing of 63 A 415 V heavy duty double break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron bracket complete in all respect (Hovell's Make) CAT. A | BI01010001010000000000000515BI0100001177 | 1 | CUM |
| 66 | 66 | Supply and Fixing of LED Tube light batten suitable for up to 1x22 watt LED tube light fitting incluling tube on Surface in all respect. CAT. AA | BI01010001010000000000000515BI0100001178 | 19 | CUM |
| 67 | 67 | Supply and Fixing of LED 23 watt of Philips/ Bajaj make. For wall bracket | BI01010001010000000000000515BI0100001179 | 10 | CUM |
| 68 | 68 | Supply and laying of aluminium conductor PVC insulated armourd served sheathed cable 1100volts grade at a depth of 750mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the engineer in charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. ( Hovell's make)\n6 sq mm 2 core | BI01010001010000000000000515BI0100001180 | 30 | CUM |
| 69 | 69 | 10 sq mm 2 core | BI01010001010000000000000515BI0100001181 | 15 | CUM |
| 70 | 70 | 16 sq mm 4 core | BI01010001010000000000000515BI0100001182 | 10 | CUM |
| 71 | 71 | Supply and Fixing of 6A to 32A MCB (10KA)(Hovell's make) | BI01010001010000000000000515BI0100001183 | 13 | CUM |
| 72 | 72 | Supply and Fixing of 63A 4P MCB (10KA) (Hovell's make) | BI01010001010000000000000515BI0100001184 | 1 | CUM |
| 73 | 73 | Supply and Fixing of power plug with 15A/250V flush type switch and 5 pin 15A/250V flush type universal socket in suitable MS box of 175x100x50mm size with phenolic laminated bakelite sheet cover 3 mm thick fixed with brass machine screw and cup washer | BI01010001010000000000000515BI0100001185 | 5 | CUM |
| 74 | 74 | Supply and Fixing of electronic fan regulator 120-280V . ISI marked on the existing switch board including making connections required material, labour , T& P etc. for proper completion of work to the satisfaction of engineer in charge of work | BI01010001010000000000000515BI0100001186 | 13 | CUM |
| 75 | 75 | Supply and wiring of submain with 2 no. 2.5 sqmm FR PVC insulated 1100Vgrade multistrand single core copper conductor cable in 20mm dia heavy gauge rigid steel conduit on surface, one no. 14SWG copper earth continuity wire etc. complete in all respects Same as above but in 20mm dia heavy duty 2mm thick PVC conduit with one no. 1.5 sqmm FRPVC insulated 1100V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit (Lumpsum quantity has been taken in consideration) | BI01010001010000000000000515BI0100001187 | 120 | CUM |
| 76 | 76 | Supplying and burrying earth electrod for lighting conductor of 600mmx600mmx6mm GI plate vertically for earthing with its top atleast 3meter below ground level complete with 20mm dia GI pipe for watering funnel, 30sqcm CI frame with hinge cover mesh masonary housing alternate layers of charcol/coke and salt atleast 150mm thick alaround etc. as per direction of engineer in charge complete in all respects | BI01010001010000000000000515BI0100001188 | 1 | CUM |
| 77 | 77 | Supplying and laying of 25mmx3mm GI strip for earth electrode directly in the ground as required complete in all respect | BI01010001010000000000000515BI0100001189 | 4 | CUM |
| 78 | 78 | Supplying and fixing of 1 no. 8 SWG GI wire in 15 mm dia GI pipe for earthing, laid in ground over in wall duly concealed including the cost of cement sand , labour , T&P other material required for proper completion of the work as directed at site. | BI01010001010000000000000515BI0100001190 | 4 | CUM |
| 79 | 79 | Supply and fixing of GI pipe B class 50mm dia | BI01010001010000000000000515BI0100001191 | 4 | CUM |
| 80 | 80 | Supply and erection of AC 230/250 Volts 50 Hz Ceiling fan with regulater standard down rod blades including connection etc. complete as required (Crompton Greaves/ Bajaj / Orient or equivalevt mark) BEE 5 STAR RATED- 1200 mm Sweep | BI01010001010000000000000515BI0100001192 | 13 | CUM |
| 81 | 81 | SITC of Grid Connected Rooftop Solar Power Plants including tranportation , insurance , five year AMC/CMC , and applicable fees and taxes | BI01010001010000000000000515BI0100001193 | 750 | CUM |
| 82 | 82 | Suppy and fixing of LED Street light Fitting having die cast aluminium body and diffrser with driver set suitable for 15 Watt. To 25 Watt. Confirming to IP65/66 protection complete having Company LOGO Engraved including Labour Complete all respect.1650-2200 system lumens, High Power LED with lenses ,110lm/W,PF>0.95,THD<10% at full load CRI>70 Potted driver Set(Not Circuitory) with 5 year warantee | BI01010001010000000000000515BI0100001194 | 6 | CUM |
| 83 | 83 | Supplying and fixing of steel Tubelar pole 7.5 meter(93kg) long designated 410 SP-6 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respects | BI01010001010000000000000515BI0100001195 | 6 | CUM |
| 84 | 84 | Supplying and fixing of 100mmx110mm shakle insulator/ 100mmx80mm pin insulator including GI boardrs/ spindle nuts etc. complete in all respect. | BI01010001010000000000000515BI0100001196 | 16 | CUM |
| 85 | 85 | Supply and erection of \"D\" clamps of 50mmx6mm flat iron on steel tubelar poles/ steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paints | BI01010001010000000000000515BI0100001197 | 16 | CUM |
| 86 | 86 | Supply and erection of over head line with ACSR conductor on poles/ service bracket including binding etc. complete in all respects | BI01010001010000000000000515BI0100001198 | 60 | CUM |
| 87 | 87 | Supply and erection of overhead line with GI wire no. 824 SWG on poles/ service bracket including binding etc. complete in all respects | BI01010001010000000000000515BI0100001199 | 15 | CUM |
| 88 | 88 | Supply and erection of hexagonal/ cradle type gauged of GI wire no. 824 SWG including binding etc. complete in all respects | BI01010001010000000000000515BI0100001200 | 6 | CUM |
| 89 | 89 | Supply and erection of stay set atleast 3.5 meters away from the pole complete with galvanised 19mm diax 1.8 meter long stay rod, 40cmx30cm x6.3mm anchor plate, thimble stay clamps, stay insulator, 19mmx600x600 double screw tightner, 7/4.00 mm GI stay wire etc. in 1:3:6 cement concrete complete in all respect | BI01010001010000000000000515BI0100001201 | 6 | CUM |
| 90 | 90 | Painting of electric pole with two coats aluminium paint over red oxide primer complete in all respects | BI01010001010000000000000515BI0100001202 | 6 | CUM |
| 91 | 91 | Non Schedule Items ( As per Market Rates ) Supply and erection of AC 230/250 Volts 50 Hz Exhaust fan including providing nuts bolts amounting frame & other accessories including connection etc. complete as required (Crompton Greaves/ GEC / Orient or equivalevt mark)\n(a) - 300 mm Sweep Airs Fresh Fans ( Light duty ) | BI01010001010000000000000515BI0100001203 | 5 | CUM |
| 92 | 92 | SANITARY FIXTURES & ACCESSORIES : Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required.\nOrissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement. | BI01010001010000000000000515BI0100001204 | 2 | CUM |
| 93 | 93 | Same as above but for European type W.C. pan with black plastic seat and lid. Make- Cera,Hindustan. | BI01010001010000000000000515BI0100001205 | 1 | CUM |
| 94 | 94 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:\n(a) a) One urinal basins with 5 litre white P.V.C. automatic flushing cistern Parryware/ Hindware Seabird/ Orient (Coral) | BI01010001010000000000000515BI0100001206 | 1 | CUM |
| 95 | 95 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :\n Kitchen sink with drain board\n 510x1040 mm bowl depth 250 mm | BI01010001010000000000000515BI0100001207 | 2 | CUM |
| 96 | 96 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.\na) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap. | BI01010001010000000000000515BI0100001208 | 2 | CUM |
| 97 | 97 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.\na) 40mm dia | BI01010001010000000000000515BI0100001209 | 4 | CUM |
| 98 | 98 | Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. | BI01010001010000000000000515BI0100001210 | 4 | CUM |
| 99 | 99 | Providing & fixing 60x2cm. C.P. brass towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw. | BI01010001010000000000000515BI0100001211 | 1 | CUM |
| 100 | 100 | Unscheduled Items | BI01010001010000000000000515BI0100001212 | 1 | CUM |
| 101 | 101 | SOIL WASTE & VENT PIPES AND FITTINGS - II Providing & fixing soil, waste and vent pipes. a) 100mm dia centrifugally cast iron S & S pipe. | BI01010001010000000000000515BI0100001213 | 8 | CUM |
| 102 | 102 | b) 75mm dia centrifugally cast iron S & S pipe. | BI01010001010000000000000515BI0100001214 | 10 | CUM |
| 103 | 103 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.\n(a) 100mm | BI01010001010000000000000515BI0100001215 | 3 | CUM |
| 104 | 104 | (b) 75mm | BI01010001010000000000000515BI0100001216 | 3 | CUM |
| 105 | 105 | Providing & fixing cast iron trap of self cleansing design with or without vent arm complete, including cost of cutting & making good the walls & floors. (a) 100mm inlet & 75mm outlet. | BI01010001010000000000000515BI0100001217 | 3 | CUM |
| 106 | 106 | Providing & fixing cast iron coller. (a) 100mm dia. | BI01010001010000000000000515BI0100001218 | 2 | CUM |
| 107 | 107 | b) 75mm dia. | BI01010001010000000000000515BI0100001219 | 2 | CUM |
| 108 | 108 | Providing and fixing plain cast iron S & S sanitary bend.(a) 100mm | BI01010001010000000000000515BI0100001220 | 3 | CUM |
| 109 | 109 | b) 75mm | BI01010001010000000000000515BI0100001221 | 3 | CUM |
| 110 | 110 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. a) 100mm | BI01010001010000000000000515BI0100001222 | 2 | CUM |
| 111 | 111 | b) 75mm | BI01010001010000000000000515BI0100001223 | 2 | CUM |
| 112 | 112 | Extra for providing & fixing 125mm dia C.P. grating in place of C.I. grating over floor traps. | BI01010001010000000000000515BI0100001224 | 2 | CUM |
| 113 | 113 | Unscheduled Items | BI01010001010000000000000515BI0100001225 | 1 | CUM |
| 114 | 114 | WATER SUPPLY PIPES AND FITTINGS - III Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.\n(internal work)\nExposed on wall (for supply water to tank) a)32mm dia nominal bore (medium duty B GRADE) | BI01010001010000000000000515BI0100001226 | 10 | CUM |
| 115 | 115 | Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall.\na) 15mm dia nominal bore | BI01010001010000000000000515BI0100001227 | 20 | CUM |
| 116 | 116 | b) 20mm dia nominal bore | BI01010001010000000000000515BI0100001228 | 20 | CUM |
| 117 | 117 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. a) 15mm dia nominal bore. | BI01010001010000000000000515BI0100001229 | 20 | CUM |
| 118 | 118 | b) 20mm dia nominal bore. | BI01010001010000000000000515BI0100001230 | 20 | CUM |
| 119 | 119 | c) 32mm dia nominal bore. | BI01010001010000000000000515BI0100001231 | 12 | CUM |
| 120 | 120 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. a) 15mm nominal bore | BI01010001010000000000000515BI0100001232 | 2 | CUM |
| 121 | 121 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 a) 15mm nominal bore short body & mixer | BI01010001010000000000000515BI0100001233 | 4 | CUM |
| 122 | 122 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15mm nominal bore | BI01010001010000000000000515BI0100001234 | 5 | CUM |
| 123 | 123 | Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats). a) 25mm. Nominal bore | BI01010001010000000000000515BI0100001235 | 2 | CUM |
| 124 | 124 | Providing and fixing gun metal gate valve with wheel of approved quality. a) 25mm dia nominal bore | BI01010001010000000000000515BI0100001236 | 1 | CUM |
| 125 | 125 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Capacity 500 litre | BI01010001010000000000000515BI0100001237 | 1000 | CUM |
| 126 | 126 | Providing and fixing brass stop cock of approved quality.\na) 15 mm nominal bore | BI01010001010000000000000515BI0100001238 | 2 | CUM |
| 127 | 127 | Unscheduled Items | BI01010001010000000000000515BI0100001239 | 1 | CUM |
| 128 | 128 | SCHEDULE OF QUANTITIES FOR EXTERNAL SEWERAGE SYSTEM - IV Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter. | BI01010001010000000000000515BI0100001240 | 20 | CUM |
| 129 | 129 | Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.\na) 150mm diameter | BI01010001010000000000000515BI0100001241 | 20 | CUM |
| 130 | 130 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. a) 150mm diameter S.W. Pipe | BI01010001010000000000000515BI0100001242 | 20 | CUM |
| 131 | 131 | Providing and fixing square mouth S.W. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design. \na) 150 x 100 mm. size P type | BI01010001010000000000000515BI0100001243 | 1 | CUM |
| 132 | 132 | Constructing brick masonry chamber for underground C.I. inspection kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38\nWith common burnt clay F.P.S. (non modular) bricks of\nclass designation 7.5 | BI01010001010000000000000515BI0100001244 | 1 | CUM |
| 133 | 133 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class\ndesignation 7.5 | BI01010001010000000000000515BI0100001245 | 1 | CUM |
| 134 | 134 | FIRE FIGHTING SYSTEM Supplying & erection of ISI Marked poratable fire extenguishers , wall mounted type wall brackets complete in all respects as per standard items with all acessories, delivery hose &nozzles wherever required including fixing on all walls as per the direction of engineer in charge Make: Minimax/ Real value/ Firex/ Safex\nA) 9 liters capacity water type Co2 (Gas pressure) fire extinguishers complete with braket, Bolt and intial charge as per IS 940- | BI01010001010000000000000515BI0100001246 | 4 | CUM |
| 135 | 135 | B)CO2 Gas type 4.5 Kg capacity (IS:2878) | BI01010001010000000000000515BI0100001247 | 4 | CUM |
| 136 | 136 | CONVENTIONAL FIRE DETECTION AND ALARM SYSTEM Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed\ntemperature (dual thermistor) type with mounting base complete with all connection etc. as required. | BI01010001010000000000000515BI0100001248 | 6 | CUM |
| 137 | 137 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. | BI01010001010000000000000515BI0100001249 | 6 | CUM |
| 138 | 138 | Site Develpoment | BI01010001010000000000000515BI0100001250 | 1 | CUM |
AI Tender Summary
Tender Timeline
Jan 02, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 10, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 11, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender