Tender For Chain Conveyor Works Bahadurgarh Lpg Plant -DESIGN, MANUFACTURE AND SUPPLYING GALVANIZED IRON (HOT DIPPED GALVANIZED) CHAIN CONVEYOR SYSTEM FOR HANDLING 14.2 KG AND 19 KG TYPE OF CYLINDERS (DESIGN WEIGHT OF CYLINDER IS APPROXIMATE 42 KG) AT 1800 CYL/HOUR NET CAPACITY INCLUDING SUPPLY OF CONVEYOR TRACK, LEG SUPPORTS, RAILING WITH SUPPORTS, CHAIN, PE STRIPS FOR THE BOTTOM OF CHAIN AND INSIDE SURFACES OF RAILING ANGLES, SPROCKETS, SHAFTS, BEARINGS, TAKE UPS, GASKETS, GALVANIZED IRON NUT BOLTS FOR JOINING THE CONVEYOR SECTIONS AND OTHER ACCESSORIES ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS DETAILED IN THE TENDER DOCUMENT AND AS ADVISED BY HPCL. RATE TO INCLUDE CARRYING OUT THIRD PARTY INSPECTION AS PER THE SCOPE OF INSPECTION DETAILED IN THE TENDER DOCUMENT. TRANSPORTATION OF ABOVE MATERIAL TO HUBLI LPG PLANT AND UNLOADING/STACKING THE MATERIAL AT SITE SHALL BE IN THE SCOPE OF VENDOR. THE FOLLOWING MATERIAL/ACCESSORIES TO BE SUPPLIED UNDER THIS ITEM SHALL BE GALVANIZED IRON QUALITY AND THE REST OF ACCESSORIES LIKE SPROCKETS, SHAFTS, BEARINGS, PE STRIPS, CONVEYOR CHAIN, COUNTER WEIGHTS, SOAP TRAYS ETC. SHALL BE AS PER THE RESPECTIVE MATERIAL QUALITY SPECIFIED IN THE TENDER DOCUMENT. GALVANIZED IRON QUALITY MATERIAL:CONVEYOR STRAIGHT SECTIONS, BENDS, T-SECTIONS, DRIVE SECTIONS, Y/T SECTIONS, LEG SUPPORTS, RAILING WITH SUPPORTS ETC. AS PER THE DESIGN OF CONVEYOR SYSTEM ARE INCLUDED IN SCOPE AND SHALL NOT BE PAID SEPARATELY. GALVANIZATION SHALL BE “HOT DIP” TYPE MEETING THE RELEVANT BIS SPECIFICATIONS. MINIMUM GALVANIZATION THICKNESS SHALL BE 50 MICRONS. NOTE: THE TOP OF CHAIN CONVEYOR INSIDE THE FILLING SHED SHALL BE KEPT NORMALLY AT 550 MM ABOVE THE FLOOR LEVEL AND IN ALL OTHER SHEDS, THE CHAIN CONVEYOR SHALL BE LAID ON THE FLOOR WITH 50 MM TO 100 MM CLEARANCE FROM THE FLOOR. HOWEVER THE HEIGHT OF LEG SUPPORTS IN CONNECTING PLATFORMS AND SHEDS (IF REQUIRED) SHALL VARY AS PER THE SITE REQUIREMENT. PART OF THE CONVEYOR SYSTEM SHALL BE BI-DIRECTIONAL. NO SEPARATE RATE IS PAYABLE FOR BI-DIRECTIONAL CONVEYORS. THE VENDORS TO CONSIDER THE ABOVE REQUIREMENT WHILE QUOTING THE RATES FOR THIS ITEM, DESIGN, MANUFACTURE AND SUPPLY OF DOUBLE STOPPER ASSEMBLY CONSISTING OF 2 NOS. OF ARMS FOR STOPPER, NECESSARY PNEUMATIC VALVES, TUBING ETC. COMPLETE AS PER THE REQUIREMENT AND TECHNICAL SPECIFICATIONS OF THE BID DOCUMENT AND AS ADVISED BY HPCL, DESIGN, MANUFACTURE AND SUPPLY OF AUTOMATIC DIVERTING UNITS OR AUTO CONVERGING UNITS FOR SMOOTH CONVEYANCE OF CYLINDERS FROM A SINGLE CONVEYOR LINE ONTO TWO CONVEYOR LINES OR VICE VERSA. THE UNIT SHALL BE CONSISTING OF DOUBLE STOPPER ASSEMBLIES, NECESSARY PNEUMATIC VALVES, TUBING, PNEUMATICALLY OPERATED ARM, MANUAL OVERRIDE, ETC., COMPLETE AS PER THE REQUIREMENT AND TECHNICAL SPECIFICATIONS OF THE TENDER DOCUMENT AND AS ADVISED BY HPCL, ROLLER CONVEYOR FOR 14.2/19 KG CYLINDERS: DESIGN, MANUFACTURE, SUPPLYING OF UNPOWERED ROLLER CONVEYORS OF SUITABLE DIMENSIONS AND DUTY FOR 14.2/19 KG CYLINDERS AS PER DETAILED TECHNICAL SPECIFICATIONS, DESIGN, MANUFACTURE AND SUPPLYING OF CYLINDER WASHING UNIT OF CAPACITY 2200 CYL/HR CONSISTING OF FLAMEPROOF MOTOR AND PUMP, FLEXIBLE COUPLING, BASE FRAME, CONVEYOR SECTION FOR TRANSPORTING THE CYLINDERS THROUGH WASHING UNIT, STAINLESS STEEL WATER SUMP, SPRINKLER NOZZLES, FLAMEPROOF PUSH BUTTON STATION WITH STAND ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL, DESIGN, MANUFACTURE AND SUPPLYING OF TELESCOPIC CONVEYORS-7.5 METER LENGTH WITH CHAIN DRIVE AND BOOM DRIVE, LEG SUPPORTS, RAILING, PE STRIPS, SPROCKETS, BEARINGS, SHAFTS, SOAP TRAYS, FOUNDATION BOLTS, LIMIT SWITCHES ETC. COMPLETE AS PER THE DETAILED TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. NOTE: MOTOR USED FOR TELESCOPIC CONVEYOR SHOULD BE CRANE AND HOIST DUTY MOTORS, DESIGN, MANUFACTURE AND SUPPLYING OF AUTO SOAP SOLUTION SUPPLY SYSTEM WITH GI PIPELINES AND STAINLESS STEEL BALL VALVE TO EVERY SOAP SOLUTION TRAY, FLP MOTOR, PUMP, SUITABLE SOAP SOLUTION STORAGE TANK, SOAP MIXING ARRANGEMENT, NECESSARY PNEUMATIC ACCESSORIES ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL, PLC BASED ONLINE AUTO PURGING UNIT 1000 CYL/HR DESIGN, MANUFACTURE, SUPPLY OF FULLY AUTOMATIC PURGING UNIT HAVING CAPACITY 1000 CYL/HR WITH ALL NECESSARY ACCESSORIES, CONTROL PANEL ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL, INSTALLATION, TESTING AND COMMISSIONING OF PUSHER ASSEMBLY INCLUDING SUPPLY OF NECESSARY NUT BOLTS, FOUNDATION BOLTS, FOUNDATION ETC. COMPLETE AS PER THE DETAILED TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK, ERECTION AND COMMISSIONING OF DOUBLE STOPPER ASSEMBLY SUPPLIED FOR 14.2/19/35/47.5 KG CYLINDERS INCLUDING SUPPLY OF NECESSARY NUT BOLTS, FOUNDATION BOLTS, FOUNDATION ETC. COMPLETE AS PER THE DETAILED TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK, ERECTION, TESTING AND COMMISSIONING OF ROLLER CONVEYOR SUPPLIED FOR 35/47.5KG CYLINDER INCLUDING SUPPLY OF NECESSARY FOUNDATION BOLTS, PREPARATION OF FOUNDATION POCKETS, GROUTING THE SAME WITH SPECIAL GROUTING CEMENT AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK, DISMANTLE, ERECTION AND COMMISSIONING OF OLD VALVE CHANGING UNIT WITH COMPLETE ACCESSORIES, DESIGN, MANUFACTURE, SUPPLY, TEST AND COMMISSIONING OF PORTABLE HOT AIR SEALING UNIT INCLUDING, FLAMEPROOF PUSH BUTTON STATION WITH STAND ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL, ERECTION, TESTING AND COMMISSIONING OF SUPPLIED 2 TO 7.5 HP HELICAL DRIVES, CONVEYOR DISMANTLING: THE SCOPE OF THE JOB INCLUDES ALL ACTIVITIES WHICH WOULD BE NECESSARY FOR REMOVING EXISTING CONVEYOR SECTIONS AS ADVISED BY HPCL OFFICER, DISMANTLING, SHIFTING AND REFIXING OF ADJUSTMENT UNIT AS PER INSTRUCTIONS FROM ENGINEER-IN-CHARGE, DESIGN, MANUFACTURE AND SUPPLYING OF IN-LINE SINGLE CONVEYOR TEST BATH OF CAPACITY 2250 CYL/HR. SUITABLE FOR INSPECTION OF 14.2 KG AND 19 KG TYPE OF FILLED LPG CYLINDERS INCLUDING PROVIDING INLET AND OUTLET CONVEYOR TRACKS, CHAIN, SPROCKETS, SHAFTS, NECESSARY SIDE RAILING, AND SUITABLE ARRANGEMENT TO STOP THE CYLINDER FROM FLOATATION ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL, etc.
