Repair Of Se Residence And Boundary Wall Nh Circle Dehri On Sone
Tender Value
19.70 Lakhs
Estimated cost
Bid Submission
16 Jan 2020
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehri on Sone → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Of Se Residence And Boundary Wall Nh Circle Dehri On Sone
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Jan-2020 | Corrigendum | Date | 16-Jan-2020 |
BOQ
| Name of Work: Repair of S.E. Residence & Boundary wall, NH Circle, Dehri-on-sone | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. | Item 1 | 6535.75 | M2 |
| 2 | 2 | Dismantling G.S. Sheet roofing and stacking the material within 50 meters lead. | Item 2 | 18.2 | M2 |
| 3 | 3 | Demolishing cement concrete including disposal of material\nwithin 50 meter lead | Item 3 | 9.33 | M3 |
| 4 | 4 | Demolishing of brick work including stacking of serviceable material and disposal of unserviceable material within 50m lead, in etc. completed all as per the direction of Engineering-In-Charge. | Item 4 | 17.49 | M3 |
| 5 | 5 | Pile work making 25cm (10”) dia bore up to 4m depth below ground with hand auger of approved quality in ordinary soil (vide classification of soil item A) true to plumb and without eccentric city in any stage of operation and disposal of the excavated earth up to 50m, lead in eluding all lifts, Details of cost 4 piles of 4m = 16 16m depth all complete as per approved design and direction of Engineer-In-Charge. | Item 5 | 14 | M |
| 6 | 6 | Reinforced Cement Concrete for pile and Beam providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement all work upto plinth level 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) etc all complete as per the direction of Engineer-In- Charge. | Item 6 | 1.84 | M3 |
| 7 | 7 | Reinforced Cement Concrete for colum/ pillar reinforced concrete work in wall (any thickness), including attached pilasters, buttress, plinth and string courses, fillets, column, pillar, piers, abutments, post and strut, etc upto floor five level excluding cost of centaring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) etc all complete as per the direction of Engineer-In- Charge. | Item 7 | 0.89 | M3 |
| 8 | 8 | Reinforced cement concrete work in band, lintel up to floor five level excluding cost of centering, shuttering, finishing and reinforcement with 1:2:4 grade stone aggregate 20mm nominal size etc. Completed all as per the direction of Engineer-In-Charge | Item 8 | 1.082 | M3 |
| 9 | 9 | Reinforcement for R.C.C works including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically treated bars TMTC-500 | Item 9 | 240.92 | Kg |
| 10 | 10 | Reinforcement for R.C.C works including straightening, cutting, bending, placing in position and binding all complete. | Item 10 | 95.47 | Kg |
| 11 | 11 | Centering and shuttering including strutting, propping etc. and removal of form work. | Item 11 | 9.25 | M2 |
| 12 | 12 | Lintels, beams, plinth beam, griders, bressumers and contilevers, for | Item 12 | 14.47 | M2 |
| 13 | 13 | Columns, pillars, abutments, posts and struts for column | Item 13 | 14 | M2 |
| 14 | 14 | Brick soling (Labour cost) providing one brick flat soling joints filling with local sand including cost of watering etc. Completed as per direction of Engineer-In-Charge. | Item 14 | 79.32 | M2 |
| 15 | 15 | Brick work with brick of class designation 100A in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) | Item 15 | 7.23 | M3 |
| 16 | 16 | 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20\nmm nominal size) for flooring work. Complete jncluding applying a priming coat of approved steel primer. | Item 16 | 11.87 | M3 |
| 17 | 17 | Chipping of 25mm Avg. thk unsound/week concrete material from slab, beams, columns etc. with manual chisel and /or by standard power driven percussion type or approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all completed as per direction of Engineer-In-Charge. | Item 17 | 217.15 | M2 |
| 18 | 18 | Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) 110 mm diameter rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion etc. Completed as per direction of Engineer-In-Charge. | Item 18 | 36 | M |
| 19 | 19 | Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water –proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken\nbricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS 2545 to required slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (C) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (E) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, With average thickness of 120 mm and minimum thickness at khurras point to be 65. All operations to be done in order as directed and specified by the E-I-C. | Item 19 | 217.15 | M2 |
| 20 | 20 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead. | Item 20 | 1087.36 | M2 |
| 21 | 21 | Cement plaster in course sand 1:4(1 cement :4 coarse sand)\n15mm thick. | Item 21 | 1040.35 | M2 |
| 22 | 22 | Cement plaster in course sand 1:4 (1 cement :4 coarse sand)\n6mm thick. | Item 22 | 194.62 | M2 |
| 23 | 23 | Providing and applying white cement based putty of average\nthickness 2 mm, of approved brand and manufacturer, over\nthe plastered wall surface to prepare the surface even and\nsmooth complete. | Item 23 | 558.85 | M2 |
| 24 | 24 | Anti-termites with chlorpyriphos E.C. 20% with 1% concentration along the external wall below concrete or masonry apron using chemical emulsion @ 2.55 litres per linear metre including drilling and plugging holes etc. Complete as per direction of Engineer-In-Charege. | Item 24 | 336 | M |
| 25 | 25 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. | Item 25 | 558.85 | M2 |
| 26 | 26 | Wall painting with plastic emulsion paint Two or more coats on new work of approved brand and manufacture to give an even shade. | Item 26 | 558.85 | M2 |
| 27 | 27 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairing to scratches etc. completed as per direction of Engineer-In-Charge. | Item 27 | 715.4 | M2 |
| 28 | 28 | Applying one coat of cement primer of approved brand and manufacture on wall surface. | Item 28 | 1373.06 | M2 |
| 29 | 29 | Finishing walls with water proofing cement paint on old work (three or more coats)of approved brand and manufacture of required shade to give an even shade. | Item 29 | 1373.06 | M2 |
| 30 | 30 | Taking out doors, windows and clerestory window shutters area 3 sqm and below (steel or wood) including stacking within 50 meters lead. | Item 30 | 32 | Each |
| 31 | 31 | Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required. In gratings, frames, guard bar, ladders, railings, brackts. | Item 31 | 1432.95 | Kg |
| 32 | 32 | Providing and fixing to steel windows by welding M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. | Item 32 | 385.52 | Kg |
| 33 | 33 | Painting with ready mixed paint on new steel work (two or more coats)of approved brand and manufacture in all shades to give an even shade. | Item 33 | 94.69 | M2 |
| 34 | 34 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) 125 x 64 2.50mm with stainless steel screws etc. complete. | Item 34 | 45 | Each |
| 35 | 35 | Providing and fixing ISI marked oxidised M.S. sliding door bolts 300x16 mm with nuts and screws etc. complete. | Item 35 | 32 | Each |
| 36 | 36 | Providing and fixing ISI marked 125 mm oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete. | Item 36 | 32 | Each |
| 37 | 37 | Providing and laying Vitrified tile 600 x 600 mm. sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. | Item 37 | 42.54 | M2 |
| 38 | 38 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm\nincluding pointing in white cement mixed with pigment of matching shade complete. | Item 38 | 75.81 | M2 |
| 39 | 39 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS :15622 of approved make in colours such as white , Ivory , Grey , Fume, Red , Brown, laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. | Item 39 | 13.75 | M2 |
| 40 | 40 | Providing and fixing 18 mm thick area of slab over 0.50 sqm gang saw cut, mirror polished, pre molded and pre polished, machine cut for kitchen platforms, vanity counters, window sills and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. | Item 40 | 2.57 | M2 |
| 41 | 41 | Providing edge moulding granite work to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | Item 41 | 4.7 | M |
| 42 | 42 | Extra for fixing marble/granite stone over and above coresponding basic item, in facia and drops of width upto 150\nmm with expoxy resin based (Araldite or equivalent) adhesive including cleaning etc. complete. | Item 42 | 4.7 | M |
| 43 | 43 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling, C.P. brass / stainless steel screws Powder coated aluminium (minimum thickness of powder coating 50 micron), all complete as per architectural drawings and the directions of Engineer-in-charge. | Item 43 | 150.51 | Kg |
| 44 | 44 | Providing and fixing glazing in aluminium door, window,\nventilator shutters and partitions etc. with EPDM rubber /\nneoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5.50 mm thickness. | Item 44 | 16.18 | M2 |
| 45 | 45 | Filling the gap in between aluminium frame & adjacent\nRCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-incharge complete. Upto 5mm depth and 5 mm width. | Item 45 | 76.8 | M |
| 46 | 46 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws Powder coated minimum thickness 50 micron aluminium etc. complete. | Item 46 | 136 | Each |
| 47 | 47 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws Powder coated minimum thickness 50 micron aluminium etc. complete as per direction of Engineer in-charge. | Item 47 | 28 | Each |
| 48 | 48 | Providing and fixing 20 mm dia metre curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc. wherever necessary complete. | Item 48 | 38.9 | M |
| 49 | 49 | Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0mm (± 0.2 mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer’s specification and direction of engineer-in charge. | Item 49 | 15 | M |
| 50 | 50 | Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer’s specification and direction of engineer-in-charge. | Item 50 | 5.04 | M2 |
| 51 | 51 | Providing and fixing 250x16 mm aluminium sliding door bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete. | Item 51 | 12 | Each |
| 52 | 52 | Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. | Item 52 | 6 | Each |
| 53 | 53 | Providing and fixing White Vitreous China wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. | Item 53 | 2 | Each |
| 54 | 54 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink 510x1040 mm bowl depth 250 mm as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required etc. Completed as per direction of Engineer-In-Charge. | Item 54 | 1 | Each |
| 55 | 55 | Providing and fixing P.V.C. waste pipe 40 mm dia for sink including P.V.C. waste fittings complete. | Item 55 | 1 | Each |
| 56 | 56 | Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. | Item 56 | 1 | Each |
| 57 | 57 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic and lid seat and lid, 10 liters low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and W.C. pan with ISI marked white solid plastic seat and lid floors wherever required. | Item 57 | 1 | Each |
| 58 | 58 | Providing and fixing G.I. inlet connection for flush pipe connecting withW.C. pan. | Item 58 | 1 | Each |
| 59 | 59 | Providing and fixing soil, waste and vent pipes : Centrifugally cast (spun) iron socket & spigot (S&S) pipe asper IS: 3989 | Item 59 | 3.5 | M |
| 60 | 60 | Providing and fixing sand cast iron S&S as per IS - 1729 bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. | Item 60 | 2 | Each |
| 61 | 61 | Providing and fixing heel rest 100 mm dia sand cast iron S&S as per IS-3989 sanitary bend. | Item 61 | 1 | Each |
| 62 | 62 | Providing and fixing sand cast iron S&S as per IS – 1729 double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. | Item 62 | 1 | Each |
| 63 | 63 | Providing and fixing PTMT total length of 645 mm, width\n78 mm and effective height of 88 mm, weighing not less\nthan 190 gms complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. | Item 63 | 4 | Each |
| 64 | 64 | Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Completed as per direction of Engineer-In-Charge. | Item 64 | 45 | M |
| 65 | 65 | Providing and fixing 25 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Completed as per direction of Engineer-In-Charge. | Item 65 | 35 | M |
| 66 | 66 | Providing and fixing 40 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Completed as per direction of Engineer-In-Charge. | Item 66 | 25 | M |
| 67 | 67 | Making connection of 25 to 40 mm nominal bore G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. Completed as per direction of Engineer-In-Charge. | Item 67 | 8 | Each |
| 68 | 68 | Providing and fixing 20 mm nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc .Completed as per direction of Engineer-In-Charge. | Item 68 | 10 | Each |
| 69 | 69 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. etc .Completed as per direction of Engineer-In-Charge. | Item 69 | 8 | Each |
| 70 | 70 | Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. | Item 70 | 8 | Each |
| 71 | 71 | Providing and fixing mirror of superior glass rectangular shape 453x357 mm (of approved quality) and of required shape and size with plastic molded frame of approved make and shade with 6 mm thick hard board backing . | Item 71 | 3 | Each |
| 72 | 72 | Total | Item 72 | 1 | Nill |
| 73 | 73 | Add 10% charge for Electrical item including fitting as per direction of Engineer-in-Charge over above estimate cost (+) | Item 73 | 1 | Nill |
| 74 | 74 | Seigniorage fee | Item 74 | 1 | Nill |
| 75 | 75 | Total | Item 75 | 1 | Nill |
AI Tender Summary
Tender Timeline
Jan 08, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 16, 2020
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 16, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 17, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender