Proposed Work Of Development And Ornamentation At Balasaheb Thakre Nagar In W . No . 1
Tender Value
86 Lakhs
Estimated cost
Bid Submission
25 Jan 2020
0 days left
EMD
86007
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
PCMC Parbhani → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Proposed Work Of Development And Ornamentation At Balasaheb Thakre Nagar In W . No . 1
BOQ
| Name of Work: Proposed work of Development and Ornamentation At Balasaheb Thakre Nagar, Ward No. 01, for P.C.M.C. Parbhani | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART_I Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. | BI01010001010000000000000515BI0100001113 | 1121.54 | CuM. |
| 2 | 2 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed | BI01010001010000000000000515BI0100001114 | 1121.54 | CuM. |
| 3 | 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. | BI01010001010000000000000515BI0100001115 | 156.77 | CuM. |
| 4 | 4 | Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) | BI01010001010000000000000515BI0100001116 | 78.38 | CuM. |
| 5 | 5 | Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) | BI01010001010000000000000515BI0100001117 | 287.34 | CuM. |
| 6 | 6 | Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) | BI01010001010000000000000515BI0100001118 | 24.84 | CuM. |
| 7 | 7 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. | BI01010001010000000000000515BI0100001119 | 26.66 | MT |
| 8 | 8 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge | BI01010001010000000000000515BI0100001120 | 1 | Nos |
| 9 | 9 | Testing of compressive strength (1 set 3 cube) | BI01010001010000000000000515BI0100001121 | 3 | CuM. |
| 10 | 10 | Royalty | BI01010001010000000000000515BI0100001122 | 326.29 | CuM. |
| 11 | 11 | PART 2 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. | BI01010001010000000000000515BI0100001123 | 1134 | CuM. |
| 12 | 12 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. | BI01010001010000000000000515BI0100001124 | 1134 | CuM. |
| 13 | 13 | Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources) | BI01010001010000000000000515BI0100001125 | 810 | CuM. |
| 14 | 14 | Supplying 60 mm trap /granite / genisis stone over size matel at the side for soling including conveying and stacking etc. complete as per directed by engineer incharge | BI01010001010000000000000515BI0100001126 | 243.01 | CuM. |
| 15 | 15 | Supplying 40 mm trap /granite / genisis stone over size matel at the side for soling including conveying and stacking etc. complete as per directed by engineer incharge | BI01010001010000000000000515BI0100001127 | 243.01 | CuM. |
| 16 | 16 | Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete. | BI01010001010000000000000515BI0100001128 | 3240 | Sq.M. |
| 17 | 17 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete | BI01010001010000000000000515BI0100001129 | 486.02 | CuM. |
| 18 | 18 | Supplying soft murum at the road site, including conveying and stacking complete. | BI01010001010000000000000515BI0100001130 | 324 | CuM. |
| 19 | 19 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge | BI01010001010000000000000515BI0100001131 | 1 | Nos |
| 20 | 20 | C.B.R. Test ( Lab ) With compaction test. | BI01010001010000000000000515BI0100001132 | 1 | Test |
| 21 | 21 | Royalty | BI01010001010000000000000515BI0100001133 | 1053.01 | CuM. |
| 22 | 22 | PART 3 Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. | BI01010001010000000000000515BI0100001134 | 150.68 | CuM. |
| 23 | 23 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. | BI01010001010000000000000515BI0100001135 | 150.68 | CuM. |
| 24 | 24 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. | BI01010001010000000000000515BI0100001136 | 75.34 | CuM. |
| 25 | 25 | Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) | BI01010001010000000000000515BI0100001137 | 50.23 | CuM. |
| 26 | 26 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. | BI01010001010000000000000515BI0100001138 | 0.42 | MT |
| 27 | 27 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge | BI01010001010000000000000515BI0100001139 | 1 | nOS |
| 28 | 28 | Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete | BI01010001010000000000000515BI0100001140 | 461.41 | Sq.M. |
| 29 | 29 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | BI01010001010000000000000515BI0100001141 | 12.22 | CuM. |
| 30 | 30 | Compressive strength of CC paver blocks | BI01010001010000000000000515BI0100001142 | 1 | Test |
| 31 | 31 | Testing of compressive strength (1 set 3 cube) | BI01010001010000000000000515BI0100001143 | 2 | Test |
| 32 | 32 | Royalty | BI01010001010000000000000515BI0100001144 | 117.98 | Test |
AI Tender Summary
Tender Timeline
Dec 31, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedJan 25, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 28, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender