Construction Of Court Building/Residential Quarters ( Excluding Cost Of Cement And Electric Works ) At Bandikui ( 06 Works )
Tender Value
9.30 Crore
Estimated cost
Bid Submission
03 Jan 2020
0 days left
EMD
18.60 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BANDIKUI → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Court Building/Residential Quarters ( Excluding Cost Of Cement And Electric Works ) At Bandikui ( 06 Works )
BOQ
| Name of Work: Construction of Court Building /Residential Quarters (Excluding cost of Cement & Electric Works) at Bandikui (6 Works) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | 1- Court Complex Building (4 Courts) | 0.0001 | Sqm. | |
| 2 | 1.02 | Part-A: Civil Work | 0.0001 | Sqm. | |
| 3 | 1.03 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with a lead in a 50 meter . All Kinds of soils | 4581.92 | Per Cum | |
| 4 | 1.04 | Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand | 730.07 | Per Cum | |
| 5 | 1.05 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix (with graded stone aggregate 40mm nominal size). | 989.49 | Per Cum | |
| 6 | 1.06 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | 10 | Per Cum | |
| 7 | 1.07 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20% | 1732 | Per Ltr | |
| 8 | 1.08 | Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRECONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion). | 1731.48 | Per Sqm | |
| 9 | 1.09 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). | 1545.39 | Per Cum | |
| 10 | 1.1 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. | 2848.96 | Per Sqm | |
| 11 | 1.11 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. | 7054.33 | Per Sqm | |
| 12 | 1.12 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor three level for : Columns, pillars, posts and struts etc. | 2243.12 | Per Sqm | |
| 13 | 1.13 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M25 grade Design Mix (Using minimum 410 kg of cement per cum of concrete) | 958.14 | Per Cum | |
| 14 | 1.14 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M25 grade Design Mix (Using minimum 410 kg of cement per cum of concrete) | 194.52 | Per Cum | |
| 15 | 1.15 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement for :-Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases. M25 grade Design Mix (Using minimum 410 kg of cement per cum of concrete) | 872.23 | Per Cum | |
| 16 | 1.16 | Providing and fixing up to floor five level pre cast cement concrete string or lacing courses, copings, bed plates, anchor blocks, windows sills, shelves, louvers steps, staircases, etc. including carriage, hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surface, including all T & P, curing etc. complete: M15 grade Nominal Mix. 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). | 39.55 | Per Cum | |
| 17 | 1.17 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Design Mix (Using minimum 400 kg of cement per cum of concrete) | 14 | Per Cum | |
| 18 | 1.18 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level Thermo-mechanically Treated bars (Conforming of relevent IS code) | 223755 | Per Kg | |
| 19 | 1.19 | Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 90 | Per Cum | |
| 20 | 1.2 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 622.99 | Per Cum | |
| 21 | 1.21 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75, Cement mortar 1 : 4 (1 cement : 4 coarse sand) including providing and placing in position 2 Nos. ,6mm Ø M.S. bar at every third course of half brick masonry . | 2020.1 | Per Sqm. | |
| 22 | 1.22 | Supplying and Filling in plinth with sandy soil free from deleterious and organic material under floors including watering ramming consolidating and dressing complete including cost of sandy soil with all lead and lift. | 1379.33 | Per Cum | |
| 23 | 1.23 | Random rubble dry stone Kharanja under floor. | 410.54 | Per Cum | |
| 24 | 1.24 | Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade. 50 mm | 726.97 | Per Sqm | |
| 25 | 1.25 | Supplying and fixing dressed sand or other approved stone shelves, tands in cement mortar 1:3 with fine dressed edges : Sand and other approved stone 50 mm thick | 4.46 | Per Sqm | |
| 26 | 1.26 | Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished :-20 mm thick | 6612.4 | Per Sqm | |
| 27 | 1.27 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . | 7719.56 | Per Sqm | |
| 28 | 1.28 | Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) : Flush/Ruled/Struk or weathered pointing. | 708 | Per Sqm | |
| 29 | 1.29 | Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design | 578.4 | Per Rmt | |
| 30 | 1.3 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles ISI marked [IS : 13753] of size 300mm x 450mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar). | 797.96 | Per Sqm | |
| 31 | 1.31 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13753 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4) | 49.47 | Per Sqm | |
| 32 | 1.32 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Green / Black 1501 Sqcm to 3600 Sqcm tiles | 182.96 | Per Sqm | |
| 33 | 1.33 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm x 600 mm | 1543.96 | Per Sqm | |
| 34 | 1.34 | Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work. | 272.74 | Per Rmt | |
| 35 | 1.35 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick For area of each slab from 2001 to 5000 Sq.Cm | 88.18 | Per Sqm | |
| 36 | 1.36 | Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete:25mm thick For area of each slab from 2001 to 5000 Sqcm | 21.1 | Per Sqm | |
| 37 | 1.37 | Rough Chisel dressed Kota stone 35 mm thick flooring of approved shade set in pattern over 20mm thick base ofcement mortar 1:6 (1 cement : 6 coarse sand) and pointing with cement sand mortar 1:3 with pigment to match the shade of stone with joint thickness up to 15 mm complete in all respects : | 51.1 | Per Sqm | |
| 38 | 1.38 | Fine dressed & machine cut edges 30-35 mm thick sand stone flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per esign drawing and instruction of Engineer Incharge. Pink sand stone (Bansi Paharpur stone) | 198.69 | Per Sqm | |
| 39 | 1.39 | Providing & laying Chequered terrazzo tiles of approved make 22mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed wit pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28mm thick bed of C.M. 1:4 :Medium shade using approximately 50% white cement and 50% ordinary cement. | 41.81 | Per Sqm | |
| 40 | 1.4 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete | 13365.9 | Per Sqm | |
| 41 | 1.41 | Supply and fixing in cement mortar welded hand railing made out of MS round or square bars, flats etc. for staircase or verandah as per design complete in all respect (wooden or PVC hand railing to be paid extra) with priming coat of red oxide. | 3360 | Per Kg. | |
| 42 | 1.42 | Extra for providing D type pipe head as top of hand railing | 3360 | Per Kg. | |
| 43 | 1.43 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of Tiron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). | 55 | Per Sqm | |
| 44 | 1.44 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of ivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge Window openable. | 5.57 | Per Sqm | |
| 45 | 1.45 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, -(do)- Window fixed | 6.51 | Per Sqm | |
| 46 | 1.46 | Extra for additional shutter in pipe section windows with wire gauge 14 mesh x 24 gauge | 5.57 | Per Sqm | |
| 47 | 1.47 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint | 4.55 | Per Sqm | |
| 48 | 1.48 | Providing and fixing M.S. sheet 1mm thick double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint | 2.6 | Per Sqm | |
| 49 | 1.49 | Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design. (Clear openable area to be measured for payment). | 13.38 | Per Sqm | |
| 50 | 1.5 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide | 26114 | Per Kg. | |
| 51 | 1.51 | Extra if square,rectangular hollow tubelar sections are used or grill made by flats only | 11200 | Per Kg. | |
| 52 | 1.52 | Providing and fixing cow catcher made of R.S. joist angles channels MS rounds including cutting welding and fabrication with priming coat of red oxide (as per design). | 3000 | Per Kg | |
| 53 | 1.53 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm | 247.27 | Per Rmt | |
| 54 | 1.54 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. | 26 | Each | |
| 55 | 1.55 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. | 6612.4 | Per Sqm | |
| 56 | 1.56 | Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat Trowel Finish av. thickness 1500 to 2000 microns. | 1722 | Per Sqm | |
| 57 | 1.57 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect:New Work | 1723.62 | Per Sqm | |
| 58 | 1.58 | Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 673.84 | Per Sqm | |
| 59 | 1.59 | Colour washing of all shades to give an even shade including all scaffolding : New work (two or more coats) with a base coat of white washing with lime. | 4118.64 | Per Sqm | |
| 60 | 1.6 | Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade :Ivory coast wood Grade I | 4.31 | Per Cum | |
| 61 | 1.61 | Providing and applying Malamine polish on teak wood work of approved brand and manufacture to give an even shade with two or more coats by compressor including sand papering, wood filler coat etc complete in all respect: New work | 199.34 | Per Sqm | |
| 62 | 1.62 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. | 1781.28 | Per Kg | |
| 63 | 1.63 | Grading roof for water proofing treatment with :Cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | 172.44 | Per Cum | |
| 64 | 1.64 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : | 373.65 | Per Rmt | |
| 65 | 1.65 | Providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture as per direction of Engineer-in-charge of size 595 X 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.33 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X32mm made out of 0.33mm (Minimum) sheet, 1200mm long spaced between main ‘T’ at 600mm centre to centre to form a grid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24X32mm made out of 0.33 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edged calcium silicate ceiling tiles of approved texture in the grid including cutting /making opening for services like diffusers,grills, light fitting, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using M 6 dash fasteners, 6mm G.I. fully threaded rods with galvnised steel level adjusters of size 85x30x0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawing and as directed by engineer-incharge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs)having area less than 0.30 Sqm. The calcium silicate ceiling tiles shall have NRC. Value 0.50 (Minimum), light reflection> 85% noncombustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity < 0.043 w/m0KC. | 901.13 | Per Sqm | |
| 66 | 1.66 | Supplying and providing of two components poly sulphide sealant containing solid contents, confirming to standard specification and approved compatible primer, for priming vertical faces prior to application of poly sulphide sealant including all labour charges for sealing of expansion joints after drill mixing of two components sealing compound. Cleaning and preparation of expansion joint using wire brush sand papering with emery paper and filing with suitable mechanical means. The work includes racking and cleaning of joints, sticking, debonding tape on bottom of joint, applying primer on edges, using masking tape on edges, providing of sealant and removal of masking tape immediately after providing sealant in joint. To vertical joint between RCC columns, bricks & stone masonry in size 40 mm width and 12 mm depth, including providing back up material (Thermocoal foam) if required. | 132.94 | Per Mtr | |
| 67 | 1.67 | Supplying and providing of two components poly sulphide sealant containing solid contents, confirming to standard specification and approved compatible primer, for priming vertical faces prior to application of poly sulphide sealant including all labour charges for sealing of expansion joints after drill mixing of two components sealing compound. Cleaning and preparation of expansion joint using wire brush sand papering with emery paper and filing with suitable mechanical means. The work includes racking and cleaning of joints, sticking, debonding tape on bottom of joint, applying primer on edges, using masking tape on edges, providing of sealant and removal of masking tape immediately after providing sealant in joint. To joints in flooring, as per drawing with first layer of poly sulphide sealant in size 20 mm width and 10 mm depth over PE Foam and then providing polyethylene foam back up rod 25 mm dia size and finally providing another layer of poly sulphide sealant in size 20 mm width and 10 mm depth over P.E. back up rod as per application procedure and direction of Engineer-in-charge. | 79.27 | Per Mtr | |
| 68 | 1.68 | Providing and fixing expansion joint board for building RCC column beams, walls, slab of Polyethylene foam of density 30 to 35 Kg/m3 of Armour Board. 40 mm Thick | 363.7 | Per Sqm | |
| 69 | 1.69 | Providing and fixing expansion joint board for building RCC column beams, walls, slab of Polyethylene foam of density 30 to 35 Kg/m3 of Armour Board. 25 mm Thick | 41.25 | Per Sqm | |
| 70 | 1.7 | Providing and fixing 150 mm wide sheet covering over expansion joints with iron screws as per design to match the colour / shade of wall treatment. Aluminum fluted strips 2 mm thick | 240.26 | Per Mtr | |
| 71 | 1.71 | Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes. | 23302.1 | Per Kg | |
| 72 | 1.72 | Providing non-asbestos high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (As per IS: 14871) roofing upto any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete excluding the cost of purlins, rafters and trusses corrugated sheets and including cutting to size and shape wherever required | 1206.9 | Per Sqm | |
| 73 | 1.73 | Extra for providing and fixing wind ties of 40x 6mm flat iron section. | 223.14 | Per Mtr | |
| 74 | 1.74 | Providing and fixing ridges and hips in non-asbestos fibre ement high impact polypropylene reinforced roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. Close fitting adjustable ridges | 90 | Per Mtr | |
| 75 | 1.75 | Providing and fixing non-asbestos fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete : Barge boards | 54.06 | Per Mtr | |
| 76 | 1.76 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, | 932 | Per Kg | |
| 77 | 1.77 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, djustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike- late and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile C | 828.72 | Per Rmt | |
| 78 | 1.78 | Providing and fixing external grade board solid core single leaf water proof flush door shutters ISI 2202-67 marked using Phenol formaldehyde resin glue both sides with approved stainless steel fittings complete as per annexure 'A' : 35 mm thick Commercial Veneer both side | 233.59 | Per Sqm | |
| 79 | 1.79 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. | 233.59 | Per Sqm | |
| 80 | 1.8 | Extra for providing other type of fittings as mention in annexure A ( as approved by EI) :Stainless steel fittings | 233.59 | Per Sqm | |
| 81 | 1.81 | Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured). | 44.68 | Per Sqm | |
| 82 | 1.82 | Renewing glass panes with wooden fillets wherever necessary :5mm thick plain glass panes | 53.23 | Per Sqm | |
| 83 | 1.83 | Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent with pair of CP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. | 78 | Each | |
| 84 | 1.84 | Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 0.8mm thick mica | 490.539 | Per Sqm | |
| 85 | 1.85 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of Tiron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). | 26.76 | Per Sqm | |
| 86 | 1.86 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone 25 to 30mm thick. | 156.07 | Per Sqm | |
| 87 | 1.87 | Providing and fixing of double leaf steel shutter for upboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge | 29.73 | Per Sqm | |
| 88 | 1.88 | Providing & Fixing mirror polished and machine edge cut Rajasthan Granite Stone laid on 20mm thick base of cement mortar 1:3 jointing with white cement mortar 1:2 ( 1 white cement:2 marble dust ) with pigment to match the shade of the granite slab complete including grinding, rubbing and polishing etc , as per direction of engineer in charge, of size above 3601 Sqcm. Sirohi White, Dewada Green, Zeerawal, | 2167.16 | Per Sqm | |
| 89 | 1.89 | Providing & Fixing mirror polished and machine edge cut Rajasthan Granite Stone laid on 20mm thick base of cement mortar 1:3 jointing with white cement mortar 1:2 ( 1 white cement:2 marble dust ) with pigment to match the shade of the granite slab complete including grinding, rubbing and polishing etc , as per direction of engineer in charge, of size above 3601 Sqcm. Devgarh Black, Magestic Black | 104.63 | Per Sqm | |
| 90 | 1.9 | Providing & Fixing Casement Door complete, consisting of 3 box multi-chamber construction, with UPVC frame of size 62X58mm with 1.5mm/2mm thick GI reinforcement wherever required. Door shutter of 102mmX62mm shall consist of 5mm thick toughened glass or solid PVC panel along with complete Zinc powder coated fittings, hinges, gear and handles for operating door. Casement door frame shall be fixed with virgin quality plugs and MS screws and sealing shall be done with silicon sealant.. All welding joints of frame and shutter shall be cleaned and milled with CNC mechanism to provide uniform good finish on all visible joints. Complete door shall be installed with 10mmX100mm fasteners with white cap in existing prefinished wall cut out cemented to glass level plane at all height and width. All corners shall be mitered cut and thermal welded. Frame shall consist of EPDM gasket fitted in groove of frame profile for proper air and sound insulation. The shutters shall be fitted with UPVC glazing bead of size 36mmX20mm with inner and outer co-extruded EPDM/TPE-E weather seal gaskets. Each openable door shutter is to be fixed with 3 load beading butt hinges and locking of door is to be provided with multi point transmission gear ( ESPAG ) with white finish. \nRate shall be inclusive of all risks & costs involved in labour, material, production process, machinery , T & P, contingencies, fittings and fixtures, testing, loading, transportation, unloading, installation, taxes/cess/levies fixing/assembling at site of work , complete in all respect, as per standards , drawings, specifications and directions of Engineer-in-Charge. White Coloured Double Leaf | 115.47 | Per Sqm | |
| 91 | 1.91 | Providing & Fixing 3 track UPVC Sliding Window complete consisting of UPVC frame of size 112x52mm and UPVC Shutter of size 42mmX68MM with 1.5mm/2mm thick GI section reinforcement, wherever required, manufactured in ISO 9001:2000 and 14001 certified company. Frame shall have 3 track configuration , vertical member of frame shall have rail/track. All the four corners shall be mitered cut and thermal welded. Shutter shall be duly mitered cut and thermal welded with UPVC glazing bead of size 22mmX20mm with inner and outer co-extruded with and outer EPDM/TYPE weather gaskets fitted in in built groove of frame profile for proper air and sound insulation. Frame shall be milled with drain and air equalizer hole , in order to be water tight and for drainage of accumulated water if any, to outer side. Shutters shall consist of 5mm thick toughened glass. The window shall consist of 2 shutters. One shutter shall have SS wire mesh along with complete Zinc powder coated fittings, locks, pulley/rollers, gear and handle for operating window, fixing of frame with virgin quality plugs and MS screw sealing. Sealing shall be done with silicon sealant. Frame shall be co extruded with n. All welding joints of frame and shutter shall be cleaned and milled with CNC mechanism to provide uniform good finish on all visible joints. Complete window shall be installed with 10mmX100mm fasteners with white cap in existing prefinished wall cut out cemented to glass level plane at all height and width. \nRate shall be inclusive of all risks & costs involved in labour, material, production process, machinery , T & P, contingencies, fittings and fixtures, testing, loading, transportation, unloading, installation, taxes/cess/levies fixing/assembling at site of work , complete in all respect, as per standards , drawings, specifications and directions of Engineer-in-Charge. White Colour. | 33.44 | Per Sqm | |
| 92 | 1.92 | Providing & Fixing Double Panel Fame ( DPF ) Window complete, consisting of UPVC frame of size 110mmX38mm with 1.5mm/2mm thick GI reinforcement, wherever required , manufactured in ISO 9001:2000 and 14001 certified company. Out side openable shutter (with 5mm thick toughened glass) and Inside openable S S Wire Mesh Shutter , shall be of section of size 75mmX50mmX35mm. The window shutter shall consist of Zinc powder coated fittings, friction hinges, gear and handle for operating window. Window frame shall be fixed with virgin quality plugs and MS screw. Sealing shall be done with silicon sealant. All the four corners shall be mitred cut and thermal welded and fitted with UPVC glazing bead of size 36mmX20mm, with inner and outer co-extruded with and outer EPDM/TPE weather gaskets fitted in in built groove of frame profile for proper air and sound insulation. Frame shall be milled with drain and air equaliser hole, in order to be water tight and for drainage of accumulated water if any, to outer side. Locking system of window shall be provided with multi point transmission gear (ESPAG) with white finish. Complete window shall be installed with 10mmX100mm fasteners with white cap in existing prefinished wall cut out cemented to glass level plane at all height and width. All welding joints of frame and shutter shall be cleaned and milled with CNC mechanism to provide uniform good finish on all visible joints. Windows shall be partly fixed and partly openable. Provision shall be kept for safety bars. Rate shall be inclusive of all risks & costs involved in labour, material, production process, machinery , T & P, contingencies, fittings and fixtures, testing, loading, transportation, unloading, installation, taxes/cess/levies fixing/assembling at site of work , complete in all respect, as per standards , drawings, specifications and directions of Engineer-in-Charge. White Colour. | 217.11 | Per Sqm | |
| 93 | 1.93 | Providing & Fixing Ventilator having UPVC/glass louvers , openable, top hung, with section of size 58mmX62mm with 5mm thick frosted glass. Fixing shall be done with virgin quality plugs and MS screws and sealing shall be done with silicon sealant. Complete ventilator shall be installed with 10mmX100mm fasteners with white cap in existing prefinished wall cut out cemented to glass level plane at all height and width. Frame shall consist of EPDM gasket fitted in groove of frame profile for proper air and sound insulation. All welding joints of frame and shutter shall be cleaned and milled with CNC mechanism to provide uniform good finish on all visible joints. locking of door is to be provided with multi point transmission gear ( ESPAG ) with white finish. Complete ventilator shall be installed with 10mmX100mm fasteners with white cap in existing prefinished wall cut out cemented to glass level plane at all height and width. Ventilator shall have Zinc powder coated fittings, friction hinges, gear and handle for operating ventilator. Ventilator frame shall be fixed with virgin quality plugs and MS screw. Sealing shall be done with silicon sealant. All the four corners shall be mitered cut and thermal welded and fitted. Frame shall be milled with drain and air equalizer hole , in order to be water tight and for drainage of accumulated water if any, to outer side. \nRate shall be inclusive of all risks & costs involved in labour, material, production process, machinery , T & P, contingencies, fittings and fixtures, testing, loading, transportation, unloading, installation, taxes/cess/levies fixing/assembling at site of work, complete in all respect, as per standards , drawings, specifications and directions of Engineer-in-Charge. White Colour. | 25.69 | Per Sqm | |
| 94 | 1.94 | Providing and fixing 1st quality cool roof white vitrified tile size 300x300x10 mm confirming to IS : 4457:2007 on roofs having water absorption <0.5%, SRI>90 (ASTME1980,EN673andEn 411) BEPL (Building Energy Performance Laboratory Certified), laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | 1711.5 | Per Sqm | |
| 95 | 1.95 | Providing and fixing 50 mm thick Extruded Polystyrene (XPS) Thermal Insulation boards in cavity walls having minimum compressive strength 350kPa, @ 10% deflection, minimum flexural strength 414 KPa, and minimum density 34 Kg per cum | 1770.56 | Per Sqm. | |
| 96 | 1.96 | Total Part-A : Civil work | 0.0001 | Sqm. | |
| 97 | 1.97 | Part-B : Sanitary Work | 0.0001 | Sqm. | |
| 98 | 1.98 | P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. | 12 | Each | |
| 99 | 1.99 | P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : Size 580x440 mm. | 22 | Each | |
| 100 | 2 | P & F water closet Seat Covers with brass hinges complete : Solid PVC (IS 2548 marked) grade-I White for EWC. | 12 | Each | |
| 101 | 2.01 | P & F C.P. lugs for toilet seat cover. | 12 | Per Pair | |
| 102 | 2.02 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. | 12 | Each | |
| 103 | 2.03 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Paper Holder | 12 | Each | |
| 104 | 2.04 | P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : WVC with C.P. brass bend. | 22 | Each. | |
| 105 | 2.05 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 630 mm x 500 mm dia for counter top. | 30 | Each | |
| 106 | 2.06 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 580 mm x 450 mm | 2 | Each | |
| 107 | 2.07 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick commercial ply base fixed to wooden screws & washers. Size 600 x 450mm x 4 mm thick | 30 | Each | |
| 108 | 2.08 | Glass Shelf with edges rounded off Anodised Aluminium angle frame & C.P. brass brackets & guard rail size 600x120mm | 10 | Each | |
| 109 | 2.09 | P & F Bottle Trap of approved make :C.P Brass 32 mm | 26 | Each | |
| 110 | 2.1 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI 600 mm long towel rail | 16 | Each | |
| 111 | 2.11 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Revolving type towel ring | 10 | Each | |
| 112 | 2.12 | P&F Grating of approved quality/ make : C.P. brass with frame (Heavy) & superior quality size 125mm dia. | 76 | Each | |
| 113 | 2.13 | P & F Liquid Soap Container with brackets complete of approved make:C.P. brass | 22 | Each | |
| 114 | 2.14 | P & F Soap Dish or Tray of approved quality/make C.P. brass heavy and superior quality. | 2 | Each | |
| 115 | 2.15 | P & F Pillar Cocks (IS:8934 Mark) of superior quality and approved make : C.P. Pillar cock, Swan-neck with casted spout, 15 mm nominal bore. | 4 | Each | |
| 116 | 2.16 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : C.P.Brass bib cock, 15 mm nominal bore. | 7 | Each | |
| 117 | 2.17 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make : Long body, 15mm nominal bore weight not less than 690 gm | 8 | Each | |
| 118 | 2.18 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked) with 37 cm long thread and nut. | 11 | Each | |
| 119 | 2.19 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Soap dish | 20 | Each | |
| 120 | 2.2 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Double coat hook | 10 | Each | |
| 121 | 2.21 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Single lever wash basin mixer with 450 mm long copper connection pipe | 12 | Each | |
| 122 | 2.22 | P & F Mixing Range (15mm) C.P. sink mixer with swinging spout J-pipe. | 2 | Each | |
| 123 | 2.23 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Wall mixer 3 in 1 system with provision of tetephonic bath shower with bend pipe | 1 | Each | |
| 124 | 2.24 | P & F Stop cock (IS:8931 Mark) superior quality & of approved make : Brass 400 gm. 15 mm nominal bore. | 40 | Each | |
| 125 | 2.25 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Bib Cock with long thread 15 mm nominal size | 48 | Each | |
| 126 | 2.26 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Long body Bib Cock 15 mm nominal size | 14 | Each | |
| 127 | 2.27 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Angular stop cock with long thread 15 mm nominal size | 86 | Each | |
| 128 | 2.28 | P & F 15 mm. Dia Connection Pipe of approved quality/make : CP Brass Pipe with CP Brass nuts upto length 600mm. | 86 | Each | |
| 129 | 2.29 | 1.0 mm thick Salem stainless steel AISI -304 kitchen sink of approved make (Nirali, Neel – kanth, Jaina, Faber-Castell ) with large waste coupling. Overall size 45\"x 20\"x8\", Bowl size 20\"x16\"x8\" (with drain board) | 2 | Each. | |
| 130 | 2.3 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Mini stall size 455x385x350mm | 26 | Each | |
| 131 | 2.31 | P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. Makrana `Albeta` Marble having light streaks. | 15 | Each | |
| 132 | 2.32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 15 mm nominal outer dia pipes | 162 | Rmt | |
| 133 | 2.33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominal outer dia pipes | 190 | Rmt | |
| 134 | 2.34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 25 mm nominal outer dia pipes | 150 | Rmt | |
| 135 | 2.35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work).25 mm nominal outer dia pipes | 80 | Rmt | |
| 136 | 2.36 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 40mm dia nominal bore, B-class | 90 | Rmt | |
| 137 | 2.37 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 50mm dia nominal bore, B-class | 210 | Rmt | |
| 138 | 2.38 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : 40mm dia nominal bore | 10 | Each | |
| 139 | 2.39 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : 50mm dia nominal bore | 8 | Each | |
| 140 | 2.4 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 25 mm nominal bore. | 22 | Each | |
| 141 | 2.41 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 40 mm nominal bore. | 6 | Each | |
| 142 | 2.42 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 50 mm nominal bore. | 4 | Each | |
| 143 | 2.43 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design 1000 litres capacity. | 14 | Each | |
| 144 | 2.44 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 75 mm dia | 175 | Mtr. | |
| 145 | 2.45 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B (-do-) 110 mm dia | 640 | Mtr. | |
| 146 | 2.46 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 160 mm dia | 740 | Rmt | |
| 147 | 2.47 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Coupler 110 mm dia | 34 | Each | |
| 148 | 2.48 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Bend 87.5 Deg 110 mm dia | 54 | Each | |
| 149 | 2.49 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Bend 45 Deg 110 mm dia | 68 | Each | |
| 150 | 2.5 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Door Bend 87.5 Deg 110 mm dia | 56 | Each | |
| 151 | 2.51 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Single 'Y' with door 110 mm dia | 17 | Each | |
| 152 | 2.52 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Double 'Y' with door 110 mm dia | 17 | Each | |
| 153 | 2.53 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Pipe clip 110 mm dia | 330 | Each | |
| 154 | 2.54 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Single Tee with door 110 mm dia | 152 | Each | |
| 155 | 2.55 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Nahani Trap without Jali 4\" 110 mm dia | 70 | Each | |
| 156 | 2.56 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Nahani Trap without Jali 3\", 75 mm dia. | 63 | Each | |
| 157 | 2.57 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Vent Cowel 110 mm dia | 58 | Each | |
| 158 | 2.58 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Pipe clip 110 mm dia | 360 | Each | |
| 159 | 2.59 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Gully Trap 110 mm dia | 6 | Each | |
| 160 | 2.6 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.50 M | 20 | Each | |
| 161 | 2.61 | Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design : Depth up to 1.50 M | 11 | Each | |
| 162 | 2.62 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 450 X 450 mm depth upto 0.5 M Cement cover with frame. | 110 | Each | |
| 163 | 2.63 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 600 X 450 mm depth upto 0.5 M to 1.0 M Cement cover with frame. | 10 | Each | |
| 164 | 2.64 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: Size 300 Cm. dia outside & 300 Cm. depth. | 5 | Each. | |
| 165 | 2.65 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400x140x150 cm. (for 50 users) | 5 | Each. | |
| 166 | 2.66 | Supplying and fixing Ferro- cement cover with C.I. frame for chambers & man holes of size.500mm dia 25 Kg.-do-70 MT centre point load seal type (Heavy duty.) | 8 | Each | |
| 167 | 2.67 | P & F M.S. Foot Rests in with C.M.,1:3, standard design in 20mm square M.S. bar 50 mm embedded in wall & 10 cms. projected out complete. | 10 | Each | |
| 168 | 2.68 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification | 78 | Per Cum | |
| 169 | 2.69 | Total Part-B | 0.0001 | Sqm. | |
| 170 | 2.7 | Part - C : Internal Road and Parking Work | 0.0001 | Sqm. | |
| 171 | 2.71 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201. By Mechanical Means In area of thorny jungle | 3.8 | Per Hect | |
| 172 | 2.72 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3 | 2622 | Per Cum | |
| 173 | 2.73 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300-1 and 300-2 with a lead upto 1000 m as per MoRTH Specification Clause 305.3 | 6044 | Per Cum | |
| 174 | 2.74 | Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means with lead up to 20 km For Grading I Material | 1986.16 | Per Cum | |
| 175 | 2.75 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, coarse aggregate 26.5mm nominal size aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. as per MoRTH Specification cl. 601. | 1489.62 | Per Cum | |
| 176 | 2.76 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104, P.C.C grade M 10, Nominal mix 1:3:6 | 188.46 | Per Cum | |
| 177 | 2.77 | Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 602.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound and water finishing to lines and grade as per drawing and MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments (Without dowel bar) | 1420.2 | Per Cum | |
| 178 | 2.78 | Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 100 mm as per drawings and as per IS 15658:2006.and all materials shall conform to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks. Category 'A' : Dentated units to key into each other on all four faces Zigzag shape as per IRC:SP:63-2004 | 2512.8 | Per Sqm | |
| 179 | 2.79 | Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 80 mm as per drawings and as per IS 15658:2006.and all materials shall conform to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks. Category 'A' : Dentated units to key into each other on all four faces Zigzag shape as per IRC:SP:63-2004 | 440 | Per Sqm | |
| 180 | 2.8 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 2905.300 mm dia | 570 | Per Mtr | |
| 181 | 2.81 | P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia.110 / 95 mm | 520 | Per Mtr | |
| 182 | 2.82 | Part-D: Tube well and RWH | 0.0001 | Sqm. | |
| 183 | 2.83 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 200 mm dia Nominal bore. | 250 | R.Mtr | |
| 184 | 2.84 | Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well. | 2 | Per Hr. | |
| 185 | 2.85 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work. Nominal bore of pipe 200 mm | 132 | R.Mtr | |
| 186 | 2.86 | Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. 200mm-Nominal Bore. | 118 | R.Mtr | |
| 187 | 2.87 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size: 200 mm | 1 | Each | |
| 188 | 2.88 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. | 30 | Each | |
| 189 | 2.89 | Installation of submersible motor pump set in Tube-well/open well complete ( labour charges only) including transportation of tripod, chain pulley block & any other material required for lowering purpose. | 1 | Each | |
| 190 | 2.9 | SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. 150 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively. 10.0 HP, 3-Ø, (93-200)Mtr, (240-60)LPM, Group 1 | 1 | Each | |
| 191 | 2.91 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire | 180 | Each | |
| 192 | 2.92 | P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 4.0 Sq mm 4 core. | 180 | R.Mtr | |
| 193 | 2.93 | Supply and fixing of Oil / Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors.For Three phase Submersible / Mono block pump 3.0 HP to 10.0 HP ( DOL )-Group 1 | 1 | Each | |
| 194 | 2.94 | Providing & lowering of G.I. Pipes, flange pipe including rubber washer and nuts of 8 mm dia complete in all respect I.S.1239 Marked. B Class 50 mm dia | 180 | R.Mtr | |
| 195 | 2.95 | Construction of Recharge Shaft in filter pit including Earth work Excavation , lifting excavted earth with all lift and 50 m lead and centering & shuttering evenever required. Diameter 900 mm | 24 | R.Mtr | |
| 196 | 2.96 | Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of M20 mix with 40 mm thickness Diameter 900 mm | 24 | R.Mtr | |
| 197 | 2.97 | Supply & lowering air line of 25mm dia, G.I. pipe 'B' class having perforation 3 to 5mm size all arrow of G.I. pipe in Zig-Zag fashion & making air vent at top including the cost of Tee-Nipples, Elbow, Socket etc. | 104 | R.Mtr | |
| 198 | 2.98 | Supply & lying River-gravels of 9 to 12 mm size in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids. | 11 | Per Cum | |
| 199 | 2.99 | Supply & lying River-gravels of 3 to 5 mm size in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids . | 6 | Per Cum | |
| 200 | 3 | Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse, without deduction of voids. | 10 | Per Cum | |
| 201 | 3.01 | Total Part-D : Tube well and RWH | 0.0001 | Sqm. | |
| 202 | 3.02 | Part - E : Plantation Work | 0.0001 | Sqm. | |
| 203 | 3.03 | Supply & Planting of shady plants ( Neem, Peepal, Goolar, Jamun, Imli or other specified ) along road side including the following activities:- \n1. Preparation of soil including cleaning & removing of unwanted shrubs removal of stones & garbage. \n2. Supply of plant at site of two years of age & height more than 1.50 Mtr \n3. Supply of dry manure ( Farm yard manure organic ) \n4. Supply of Insecticides \n5. Digging of pits size 60x60x60 cms. Including removal of stones. Manuring application of insecticides & watering at least 15 liter per plant after planting. \n6. Half brick Circular tree guard in second class bricks, internal dia 1.25 meter and height 1.20 meter above ground and 0.20 meter below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1Cement : 6 Sand) and the intermediate courses being in dry honey comb masonry, as per design complete. 7. Watering to plants. \n8.Maintenance of plants by the contractor including of pits/bids preparation of Thavala Hoeing weeding etc. & application of insecticides etc. & security. If the plant die during maintenance contractor has to replace same height plant at his own cost. \nNote:- SD Shall be refunded after counting of plants on completion of defect liability period of 5 years | 200 | Each | |
| 204 | 3.04 | Supply of dry manure including loading unloading, transportation & stacking at site.Farm yard manure organic | 10 | Per Cum | |
| 205 | 3.05 | Supply of dry manure including loading unloading, transportation & stacking at site.Goat dungmanure. | 10 | Per Cum | |
| 206 | 3.06 | Supply of Chemical Fertilizers at store in bags weighing not less than 50 kg. each including loading unloading & ransporation etc. D.A.P. | 250 | Per Kg | |
| 207 | 3.07 | Supply of Insecticides & Pesticides at store in dust / liquid form complete. Methyl Prathion 2%. | 125 | Per Kg | |
| 208 | 3.08 | Spreading of manure and good earth in required thickness (cost of manure and good earth to be paid\nseparately). | 200 | Per Cum | |
| 209 | 3.09 | Preparation of beds for bedging and shrubbary by excavating 60 cms. deep and trenching the excavated base to a further depth of 30 cms. refilling the excavated earth after breaking clods & mixing with manure in the ratio 8 :1 (8 parts of stacked\nvalume of manure after reduction by 8% flooding with water filling with earth if necessary (cost of manure of extra earth to be paid for seperately). | 180 | Each | |
| 210 | 3.1 | Laying of lawns including ploughing levelling breaking of clods manuring & removal of stones etc.(Cost of manure or extra good earth to be paid seperately) Maintenance of lawns for 30 days or more till the grass forms a thick lawns free from weeds & fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost. In rows 15 Cms. apart in either direction | 2000 | Per Sqm | |
| 211 | 3.11 | Supply of different varities of tree / shrubs / climbers according to height and age of the plant at site including loading/ unloading & transportation etc. complete : Different flowing plants 900 mm to 1500 mm. | 300 | Each | |
| 212 | 3.12 | Supply of different varities of tree / shrubs / climbers according to height and age of the plant at site including loading/ unloading & transportation etc. complete :Different varrities of shrubs 600 mm to 900 mm. | 150 | Each | |
| 213 | 3.13 | Supply of different varities of tree / shrubs / climbers according to height and age of the plant at site including loading/ unloading & transportation etc. complete :Different varrities of climbers 900 mm to 1500 mm. | 90 | Each | |
| 214 | 3.14 | Supply of different varieties of Bougainvillea in poly bags / earthen pots according to height growth & age of plant at site including loading. unloading & transportation etc. complete : Different varieties of Boungainvillea 600 mm to 900 mm | 120 | Each | |
| 215 | 3.15 | Supply of different varieties of Rose plants in polyetlene bags / earthen pots according to height. growth & age of the plant at site including loading, unloading & transportation etc.complete :Different varieties of Grafted Rose Plant. | 75 | Each | |
| 216 | 3.16 | Supply of different varietis of palms in polyethylene bags / earthen pots according to height. growth & age of the plant at site including loading. unloading & transportation etc. complete : | 75 | Each | |
| 217 | 3.17 | 2- Residential Quarters (2 Nos Type II) | 0.0001 | Sqm. | |
| 218 | 3.18 | Part-A: Civil Work | 0.0001 | Sqm. | |
| 219 | 3.19 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with a lead in a 50 meter . All Kinds of soils | 937.61 | Per Cum | |
| 220 | 3.2 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos / Lindane emulsifiable concentrate of 20% | 375 | Per Ltr | |
| 221 | 3.21 | Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRECONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion). | 375.2 | Per Sqm | |
| 222 | 3.22 | Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand | 101.55 | Per Cum | |
| 223 | 3.23 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix (with graded stone aggregate 40mm nominal size). | 182.88 | Per Cum | |
| 224 | 3.24 | Providing and fixing up to floor five level pre cast cement concrete string or lacing courses, copings, bed plates, anchor blocks, windows sills, shelves, louvers steps, staircases, etc. including carriage, hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surface, including all T & P, curing etc. complete: M15 grade Nominal Mix. 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). | 4.31 | Per Cum | |
| 225 | 3.25 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). | 379.05 | Per Cum | |
| 226 | 3.26 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. | 236.2 | Per Sqm | |
| 227 | 3.27 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor Three level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. | 1117.74 | Per Sqm | |
| 228 | 3.28 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor three level for : Columns, pillars, posts and struts etc. | 432.17 | Per Sqm | |
| 229 | 3.29 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M25 grade Design Mix (Using minimum 410 kg of cement per cum of concrete) | 157.65 | Per Cum | |
| 230 | 3.3 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M25 grade Design Mix (Using minimum 410 kg of cement per cum of concrete) | 29.52 | Per Cum | |
| 231 | 3.31 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement for :-Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases. M25 grade Design Mix (Using minimum 410 kg of cement per cum of concrete) | 125.72 | Per Cum | |
| 232 | 3.32 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level Thermo-mechanically Treated bars (Conforming of relevent IS code) | 40333 | Per Kg | |
| 233 | 3.33 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) | 212.23 | Per Cum | |
| 234 | 3.34 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75, Cement mortar 1 : 4 (1 cement : 4 coarse sand) including providing and placing in position 2 Nos. ,6mm Ø M.S. bar at every third course of half brick masonry . | 110.67 | Per Sqm | |
| 235 | 3.35 | Supplying and Filling in plinth with sandy soil free from deleterious and organic material under floors including watering ramming consolidating and dressing complete including cost of sandy soil with all lead and lift. | 384.58 | Per Cum | |
| 236 | 3.36 | Random rubble dry stone Kharanja under floor. | 81.32 | Per Cum | |
| 237 | 3.37 | Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade. 50 mm | 49.79 | Per Sqm | |
| 238 | 3.38 | Plaster on new surface on walls in cement sand mortar 1:6 including raking of joints etc. complete fine finished :-20 mm thick | 1442.92 | Per Sqm | |
| 239 | 3.39 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . | 1388.76 | Per Sqm | |
| 240 | 3.4 | Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design | 87.96 | Per Rmt | |
| 241 | 3.41 | Grading roof for water proofing treatment with :Cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) | 26.59 | Per Cum | |
| 242 | 3.42 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : | 205.88 | Per Rmt | |
| 243 | 3.43 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, djustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike- late and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile E | 93.3 | Per Rmt | |
| 244 | 3.44 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, djustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike- late and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile C | 167.7 | Per Rmt | |
| 245 | 3.45 | Providing and fixing external grade board solid core single leaf water proof flush door shutters ISI 2202-67 marked using Phenol formaldehyde resin glue both sides with approved stainless steel fittings complete as per annexure 'A' : 35 mm thick Commercial Veneer both side | 69.14 | Per Sqm | |
| 246 | 3.46 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. | 69.14 | Per Sqm | |
| 247 | 3.47 | Extra for providing other type of fittings as mention in annexure A ( as approved by EI) :Stainless steel fittings | 69.14 | Per Sqm | |
| 248 | 3.48 | Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured). | 4.7 | Per Sqm | |
| 249 | 3.49 | Providing and fixing fully panelled/partly panelled/ double leaf shutter frame for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - 'A' and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete : 30 mm thick Ghana wood grade I | 24.46 | Per Sqm | |
| 250 | 3.5 | Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick SS wire gauge 14 mesh x 24 gauge | 12.23 | Per Sqm | |
| 251 | 3.51 | Extra for providing ISI marked Stainless Steel butt hinges instead of black enamelled M.S. butt hinges with necessary screws. (Shutter area to be measured). | 24.46 | Per Sqm | |
| 252 | 3.52 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. | 10 | Each | |
| 253 | 3.53 | Renewing glass panes with wooden fillets wherever necessary :5mm thick plain glass panes | 12.33 | Per Sqm | |
| 254 | 3.54 | Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent with pair of CP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. | 26 | Each | |
| 255 | 3.55 | Supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm. long wire springs grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per design. (Clear openable area to be measured for payment). | 18.58 | Per Sqm | |
| 256 | 3.56 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of Tiron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). | 7.35 | Per Sqm | |
| 257 | 3.57 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide | 1200 | Per Kg | |
| 258 | 3.58 | Colour washing of all shades to give an even shade including all scaffolding : New work (two or more coats) with a base coat of white washing with lime. | 637.92 | Per Sqm | |
| 259 | 3.59 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., herever necessary complete: 20 mm | 63.11 | Per Rmt | |
| 260 | 3.6 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles ISI marked [IS : 13753] of size 300mm x 450mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar). | 142.4 | Per Sqm | |
| 261 | 3.61 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13753 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4) | 38.47 | Per Sqm | |
| 262 | 3.62 | P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm x 600 mm | 189.97 | Per Sqm | |
| 263 | 3.63 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick For area of each slab from 2001 to 5000 Sq.Cm | 290.06 | Per Sqm | |
| 264 | 3.64 | Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete:25mm thick For area of each slab from 2001 to 5000 Sqcm | 51.04 | Per Sqm | |
| 265 | 3.65 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :Kota stone 25 to 30mm thick. | 38.46 | Per Sqm | |
| 266 | 3.66 | Supplying and fixing dressed sand or other approved stone shelves, tands in cement mortar 1:3 with fine dressed edges : Sand and other approved stone 50 mm thick | 6.69 | Per Sqm | |
| 267 | 3.67 | Providing & Fixing mirror polished and machine edge cut Rajasthan Granite Stone laid on 20mm thick base of cement mortar 1:3 jointing with white cement mortar 1:2 ( 1 white cement:2 marble dust ) with pigment to match the shade of the granite slab complete including grinding, rubbing and polishing etc , as per direction of engineer in charge, of size above 3601 Sqcm. Sirohi White, Dewada Green, Zeerawal, | 62.76 | Per Sqm | |
| 268 | 3.68 | Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work | 154.89 | Per Rmt | |
| 269 | 3.69 | Providing & laying Chequered terrazzo tiles of approved make 22mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed wit pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28mm thick bed of C.M. 1:4 :Medium shade using approximately 50% white cement and 50% ordinary cement. | 24.33 | Per Sqm | |
| 270 | 3.7 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: | 400 | Per Kg. | |
| 271 | 3.71 | Providing non-asbestos high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (As per IS: 14871) roofing upto any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete excluding the cost of purlins, rafters and trusses corrugated sheets and including cutting to size and shape wherever required | 18.58 | Per Sqm | |
| 272 | 3.72 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete | 437.53 | Per Sqm | |
| 273 | 3.73 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. | 437.53 | Per Sqm | |
| 274 | 3.74 | Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat Trowel Finish av. thickness 1500 to 2000 microns. | 500.06 | Per Sqm | |
| 275 | 3.75 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect:New Work | 333.38 | Per Sqm | |
| 276 | 3.76 | Providing and applying Malamine polish on teak wood work of approved brand and manufacture to give an even shade with two or more coats by compressor including sand papering, wood filler coat etc complete in all respect: New Surface | 24.46 | Per Sqm | |
| 277 | 3.77 | Painting with enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 270.45 | Per Sqm | |
| 278 | 3.78 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. | 543.3 | Per Kg | |
| 279 | 3.79 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge Window Fixed | 6.5 | Per Sqm | |
| 280 | 3.8 | Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 0.8mm thick mica | 145.194 | Per Sqm | |
| 281 | 3.81 | Providing & Fixing of ward robe shutters made out of 19mm thick BWP block board ISI of superior quality make. Front side finishing with 4mm thick teak veneer approved make and 0.8mm thick approved shade mica in the inner side. Covering with teak wood beading 25x12mm all the sides of shutter & 35x12mm on outer frame for making good the wall joint including heavy brass S.S. fittings (Handle 200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass\nLock 1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos., SS Hanger Rod 20mm dia) complete with melamine polishing as per drawing and design approved by Engineer in Charge. | 36.23 | Per Sqm | |
| 282 | 3.82 | Providing and fixing stainless steel ( Grade 304) railing made of\nHollow tubes, channels, plates etc., including welding, grinding, | 190 | Per Kg | |
| 283 | 3.83 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Partly fixed and partly openable [fixed area not to exceed 33%] | 47.66 | Per Sqm | |
| 284 | 3.84 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Windows side hung /Ventilators top or centre hung (openable) | 7.43 | Per Sqm | |
| 285 | 3.85 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. | 55.09 | Per Sqm | |
| 286 | 3.86 | Providing brass handles/peg stays and fittings in place of oxidized fitting | 55.09 | Per Sqm | |
| 287 | 3.87 | Providing and fixing 1st quality cool roof white vitrified tile size 300x300x10 mm confirming to IS : 4457:2007 on roofs having water absorption <0.5%, SRI>90 (ASTME1980,EN673andEn 411) BEPL (Building Energy Performance Laboratory Certified), laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | 348.17 | Per Sqm | |
| 288 | 3.88 | Total Part-A : Civil work | 0.0001 | Sqm. | |
| 289 | 3.89 | Part-B : Sanitary Work | 0.0001 | Sqm. | |
| 290 | 3.9 | P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. | 2 | Each | |
| 291 | 3.91 | P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : Size 580x440 mm. | 4 | Each | |
| 292 | 3.92 | P & F water closet Seat Covers with brass hinges complete : Solid PVC (IS 2548 marked) grade-I White for EWC. | 2 | Each | |
| 293 | 3.93 | P & F C.P. lugs for toilet seat cover. | 2 | Pair | |
| 294 | 3.94 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. | 2 | Each | |
| 295 | 3.95 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Paper Holder | 2 | Each | |
| 296 | 3.96 | P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : WVC with C.P. brass bend. | 4 | Each | |
| 297 | 3.97 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 630 mm x 500 mm dia for counter top. | 4 | Each | |
| 298 | 3.98 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 580 mm x 450 mm | 2 | Each | |
| 299 | 3.99 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick commercial ply base fixed to wooden screws & washers. Size 600 x 450mm x 4 mm thick | 6 | Each | |
| 300 | 4 | Glass Shelf with edges rounded off Anodised Aluminium angle frame & C.P. brass brackets & guard rail size 600x120mm | 6 | Each | |
| 301 | 4.01 | P & F Bottle Trap of approved make :C.P Brass 32 mm | 6 | Each | |
| 302 | 4.02 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI 600 mm long towel rail | 6 | Each | |
| 303 | 4.03 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Revolving type towel ring | 6 | Each | |
| 304 | 4.04 | P&F Grating of approved quality/ make : C.P. brass with frame (Heavy) & superior quality size 125mm dia. | 16 | Each | |
| 305 | 4.05 | P & F Liquid Soap Container with brackets complete of approved make:C.P. brass | 4 | Each | |
| 306 | 4.06 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Soap dish | 6 | Each | |
| 307 | 4.07 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Double coat hook | 4 | Each | |
| 308 | 4.08 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Single lever wash basin mixer with 450 mm long copper connection pipe | 4 | Each | |
| 309 | 4.09 | P & F Mixing Range (15mm) C.P. sink mixer with swinging spout J-pipe. | 2 | Each | |
| 310 | 4.1 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Wall mixer 3 in 1 system with provision of tetephonic bath shower with bend pipe | 4 | Each | |
| 311 | 4.11 | P & F Stop cock (IS:8931 Mark) superior quality & of approved make : Brass 400 gm. 15 mm nominal bore. | 12 | Each | |
| 312 | 4.12 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Bib Cock with long thread 15 mm nominal size | 10 | Each | |
| 313 | 4.13 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Long body Bib Cock 15 mm nominal size | 8 | Each | |
| 314 | 4.14 | Providing and fixing Superior quality (Jaguar Contiental ) CP Brass fittings complete as per direction of EI Angular stop cock with long thread 15 mm nominal size | 28 | Each | |
| 315 | 4.15 | P & F 15 mm. Dia Connection Pipe of approved quality/make : CP Brass Pipe with CP Brass nuts upto length 600mm. | 28 | Each | |
| 316 | 4.16 | 1.0 mm thick Salem stainless steel AISI -304 kitchen sink of approved make (Nirali, Neel – kanth, Jaina, Faber-Castell ) with large waste coupling. Overall size 45\"x 20\"x8\", Bowl size 20\"x16\"x8\" (with drain board) | 2 | Each | |
| 317 | 4.17 | P & F Bath Shower of approved quality/make.C.P. brass of Heavy & superior quality revolving with adjustable key150mm. | 4 | Each | |
| 318 | 4.18 | P & F Shower arm 15mm dia of approved quality/make.(-do-) size 370mm.(-do-) | 4 | Each | |
| 319 | 4.19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 15 mm nominal outer dia pipes | 36 | Rmt | |
| 320 | 4.2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominal outer dia pipes | 48 | Rmt | |
| 321 | 4.21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 25 mm nominal outer dia pipes | 36 | Rmt | |
| 322 | 4.22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work).25 mm nominal outer dia pipes | 48 | Rmt | |
| 323 | 4.23 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 25 mm nominal bore. | 12 | Each | |
| 324 | 4.24 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design 500 litres capacity. | 4 | Each | |
| 325 | 4.25 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design 1000 litres capacity. | 4 | Each | |
| 326 | 4.26 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 75 mm dia | 42 | Mtr. | |
| 327 | 4.27 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B (-do-) 110 mm dia | 160 | Mtr. | |
| 328 | 4.28 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 160 mm dia | 120 | Rmt | |
| 329 | 4.29 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Coupler 110 mm dia | 8 | Each | |
| 330 | 4.3 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Bend 87.5 Deg 110 mm dia | 20 | Each | |
| 331 | 4.31 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Bend 45 Deg 110 mm dia | 20 | Each | |
| 332 | 4.32 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Door Bend 87.5 Deg 110 mm dia | 24 | Each | |
| 333 | 4.33 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Single 'Y' with door 110 mm dia | 8 | Each | |
| 334 | 4.34 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Double 'Y' with door 110 mm dia | 8 | Each | |
| 335 | 4.35 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Pipe clip 110 mm dia | 60 | Each | |
| 336 | 4.36 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Single Tee with door 110 mm dia | 28 | Each | |
| 337 | 4.37 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Gully Trap 110 mm dia | 16 | Each | |
| 338 | 4.38 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Nahani Trap without Jali 4\" 110 mm dia | 22 | Each | |
| 339 | 4.39 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Nahani Trap without Jali 3\", 75 mm dia. | 8 | Each | |
| 340 | 4.4 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B (-do) Vent Cowel 110 mm dia | 20 | Each | |
| 341 | 4.41 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.50 M | 16 | Each | |
| 342 | 4.42 | Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design : Depth up to 1.50 M | 4 | Each | |
| 343 | 4.43 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 450 X 450 mm depth upto 0.5 M Cement cover with frame. | 48 | Each | |
| 344 | 4.44 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 230x110x150 cm.(for 20 users) | 4 | Each. | |
| 345 | 4.45 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: Size 300 Cm. dia outside & 300 Cm. depth. | 4 | Each. | |
| 346 | 4.46 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:3:6 light concrete, using brick bats complete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification | 42.6 | Per Cum |
AI Tender Summary
Tender Timeline
Dec 28, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedJan 03, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 06, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender