Repair/Maintenance Of Guard Posts , Guard Rest Rooms And Watch Towers Etc In Tech Area At Af Stn Maharajpur
Tender Value
30 Lakhs
Estimated cost
Bid Submission
28 Jan 2020
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE(AF) TECH AREA MAHARAJPUR → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair/Maintenance Of Guard Posts , Guard Rest Rooms And Watch Towers Etc In Tech Area At Af Stn Maharajpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Jan-2020 | Change in critical dates | Date | 28-Jan-2020 |
BOQ
| Name of Work: REPAIR/MAINT OF GUARD POSTS, GUARD REST ROOMS AND WATCH TOWERS ETC IN TECH AREA AT AF STN MAHARAJPUR | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demollition of cement concrete ( unreinforced) in ground floors and pavings n. exc 15 cm thick below or above ground level including floor tiles etc complete all as specified and directed . | 30 | Cum | |
| 2 | 1.01 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubish off the premises complete all as specified and directed. | 200 | Sqm | |
| 3 | 1.02 | M&L for non skid joint free coloured ceramic tiles 7-8mm thick (Square/Rectangular), area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles complete all as specified and directed.Make : KAJARIA/SOMANY/JOHNSON/ORIENT | 160 | Sqm | |
| 4 | 1.03 | All as per item No.3 here in before but as in skirting etc. | 15 | Sqm | |
| 5 | 1.04 | M&L for glazed ceramic tiles white colour in vertical surface 300x200x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over and including 10mm thick rendering on fair faces of brick work or concrete surface in cement moratar 1:4 complete all as specified and directed.Make : KAJARIA/SOMANY/JOHNSON/ORIENT | 150 | Sqm | |
| 6 | 1.05 | M&L for coloured chequered cement concrete tiles 25 cm x 25 cm x 22 to 25 mm thick set ,jointed and pointed in neat cement slurry as in floors with grey cement and pigment complete all as specified and directed.\nMake : MEHTAB TILES Indore/Star Tiles Kanpur/Mayur tiles Lucknow | 250 | Sqm | |
| 7 | 2 | M&L for 15mm thick screed bed or bedding in layer of mortar for laying floor finishes in cement mortar 1:6 complete all as specified and directed. | 410 | Sqm | |
| 8 | 3 | M&L for 25mm thick PCC (1:2:4) type B0 (12.5 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed. | 410 | Sqm | |
| 9 | 4 | M&L for 10mm thick screed bed or bedding in layer of mortar for laying skirting etc. in cement mortar 1:4 complete all as specified and directed. | 15 | Sqm | |
| 10 | 5 | Demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed. | 8 | Cum | |
| 11 | 6 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6M mean radius built in cement mortar (1:6) complete all as specified and directed. | 6 | Cum | |
| 12 | 7 | All as per item No 11 here-in-before but, except brick using old bricks obtained from demolition in serviceable conditions complete all as specified and directed. | 2 | Cum | |
| 13 | 8 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and prepare to receive the plaster complete all as specified and directed. | 200 | Sqm | |
| 14 | 9 | M&L for 15mm thick rendering on fair faces fare face of brick work in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed. | 150 | Sqm | |
| 15 | 10 | M&L for 15mm thick rendering on other than fair faces of brick/stone masonry walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed. | 50 | Sqm | |
| 16 | 11 | M&L for preparation of new plastered surfaces of wall and applying two coats of external emulsion paint (Apex of M/S asian paint or equivalent of M/S Berger or M/S ICI as approved) over a coat of primer on external surfaces of building complete all as specified and directed. | 150 | Sqm | |
| 17 | 12 | M&L for applying two coats of white wall care putty on newly plastered surface of wall to prepare surface smooth make the edges sharp & in proper alignment including rubbing by sandpaper and finally applying two coats of oil emulsion distemper on internal wall surfaces complete all as specified and directed. | 50 | Sqm | |
| 18 | 13 | M&L for Preparing old decorated plastered or unplastered surfaces of walls and applying one coat of cement base paint, white or tinted complete all as specified and directed . | 600 | Sqm | |
| 19 | 14 | M&L for preparation of old treated surface by complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. of wall and applying two coats of white wall care putty to make a smooth surface, edges sharp and proper in alignment including all rubbing by sandpaper and finally applying two coats of oil emulsion distemper on internal wall surfaces complete all as specified and directed. | 400 | Sqm | |
| 20 | 15 | M&L for preparation of old treated surface by complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. of wall and applying two coats of external emulsion paint (Apex of M/S asian paint or equivalent of M/S Berger or M/S ICI as approved) over one coat of primer on external surfaces of building complete all as specified and directed. | 750 | Sqm | |
| 21 | 16 | M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed. | 400 | Sqm | |
| 22 | 17 | M&L for 75mm thick cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate as in plinth protection and finishing the surface even & fair complete all as specified & directed.\n | 100 | Sqm | |
| 23 | 18 | M&L for plain cement concrete 1:4:8 Type D2 ( using 40mm graded Stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. | 20 | Cum | |
| 24 | 19 | M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in coping/kerbs/bed block etc complete all as specified and as directed.\nNote : The cost of adequate form work shall deemed to be incl in unit rate quoted by the tenderer. | 4 | Cum | |
| 25 | 20 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including grids/cover fillets etc. complete all as specified and directed. | 100 | Sqm | |
| 26 | 21 | S&F MS galvanised powder coated suspended false ceiling system with grid of size 600mmx 600mm; consisting of MS galvanised powder coated main runner of size 24mmx32mm and cross Tee of size 24mm x 27mm and wall angle of size 22.2mmx22.2 mm , suspended with 2mm dia GI wire hanger at 1200 mm spacing, fixed with steel dash fasteners or from purlin of roofs with butterfly clips etc complete all as specified and directed. | 100 | Sqm | |
| 27 | 22 | S&F 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic ) decorative finish fixed to aluminim or powder coated MS snap grid frame work with hold down clips in ceiling complete all as specified and directed. | 100 | Sqm | |
| 28 | 23 | Taking up or down steel tubing 15mm dia and connections etc including cleaning for refixing or removal to store etc complete all as specified and directed. | 50 | RM | |
| 29 | 24 | All as per item no.28 here in before but of 20 mm bore bore . | 50 | RM | |
| 30 | 25 | Supply and fixing only 15mm bore medium grade galvanized iron tubing with all fittings including cutting of pipe in required size , making threads etc. complete all as specified and directed.MAKE:TATA/JINDAL\n(ii) cutting chases and making good shall be measured and paid for separately under respective item.\n(iii) Rate for small fittings e.g. socket, union, nipple etc. shall be included in this items, nothing shall be separately for the same. | 40 | RM | |
| 31 | 26 | All as per item no.30 here in before but of 20 mm bore . | 40 | RM | |
| 32 | 27 | Refixing only old steel tubing of 15 mm bore and connections in new or old location of wall, ceiling & floors complete all as specified and directed.\nNote: Old serviceable pipe retrieved from taking down shall be used. | 10 | RM | |
| 33 | 28 | All as per item no. 32 here in before but of 20 mm bore . | 10 | RM | |
| 34 | 29 | M&L for Cutting chases , pinning in making good to facing for concealed water tubing n.exc. 10 cm girth and making good with (1:3) cement mortar complete all as specified and directed. | 20 | RM | |
| 35 | 30 | S&F fancy type chromium plated concealed stop cock/angle cock with adjustable wall flanges 15mm bore complete all as specified and directed. \nMAKE:JAQUAR/PARKO/PLUMBER | 8 | Each | |
| 36 | 31 | S&F in repair 10 litre capacity PVC valve less symphonic action type low level flushing cistern, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.\nMAKE:HINDWARE/PARRYWARE/JOHNSON PEDDER/CERA\n | 15 | Each | |
| 37 | 32 | S&F in repair vitreous china squatting pan 'Orrisa' pattern size 580 x 440mm white integral floor rests ( excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe, anti syphonage pipe etc including making good to floor complete all as specified and directed.\nMAKE:HINDWARE/PARRYWARE/JOHNSON PEDDER | 8 | Each | |
| 38 | 33 | S&F in repair Vitreous China urinals half stall flat back white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing flush pipe grating, coupling and union for discharge pipe complete all as specfied and directed.MAKE:HINDWARE/PARRYWARE/CERA | 8 | Each | |
| 39 | 34 | S&F in repair vitreous china wash basin, white, flat back size 630 X 450mm including waste pipe complete all as specified and directed..\nMAKE:HINDWARE/PARRYWARE/CERA | 8 | Each | |
| 40 | 35 | S&F in repair 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed. MAKE:PRINCE/FINOLEX/SUPREME | 50 | RM | |
| 41 | 36 | S&F in repair 110mm bore PVC(SWR) bends complete all as specfied and directed. MAKE:PRINCE/FINOLEX/SUPREME | 10 | Each | |
| 42 | 37 | S&F in repair 110mm bore PVC(SWR) junction single, (Single T) equal or unequal complete all specfied and directed. MAKE:PRINCE/FINOLEX/SUPREME | 4 | Each | |
| 43 | 38 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. | 22 | Each | |
| 44 | 39 | S&F in repair chromium plated, fency type, bib taps, long body, cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed in 15mm bore pipe complete all as specified and directed.\nMAKE:JAQUAR/PARKO/PLUMBER | 15 | Each | |
| 45 | 40 | Supply only 15mm bore pillar taps, fancy type, chromium plated, screwed down high pressure with or without lettered with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. \nMAKE:JAQUAR/PARKO/PLUMBER | 10 | Each | |
| 46 | 41 | S&F in replacement rotational moulded white colour ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 500 Ltr capacity including float valve 20mm dia complete all as specified and directed.\nMake: SINTEX/TUFF | 10 | Each | |
| 47 | 42 | S&F in repair galvanized mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples including wooden beading etc complete all as directed.\n\n | 36 | Sqm | |
| 48 | 43 | Hacking out old broken glass pane(any thickness, size, quality or descriptionh ) from wooden frames or steel, concrete or brick surrounds glazed with putty or fixed with beqads etc all as specified and directed | 50 | Sqm | |
| 49 | 44 | S&F 3mm thick sheet glass, any type , ordinary quality and glazing with oil putty in squre n exc 0.50Sqm in each pane complete all as specified and directed. \n | 30 | Sqm | |
| 50 | 45 | All as per item No.49 here in before but exc. 0.50 sqm each. | 20 | Sqm | |
| 51 | 46 | Taking down chowkhats with shutters of any description n.exc 1.5 Sqm each complete all as specified & directed | 34 | Each | |
| 52 | 47 | Taking down chowkhats or frame (without taking off shutters from the frame) area exc 1.5Sqm but nexc 4.00Sqm each complete all as specified and directed. | 10 | Each | |
| 53 | 48 | Taking down shutters of any description exc 1Sqm and n exc 2Sqm each complete all as specified & directed. | 15 | Each | |
| 54 | 49 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.\nMAKE:RAJSREE/SINTEX | 47 | RM | |
| 55 | 50 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded -sealed to the styles & rails with suitable PVC sheet beading,and jointing together with solvent cement complete all as specified and directed.\nMAKE:RAJSREE/SINTEX | 10 | Sqm | |
| 56 | 51 | S&F framed work of angles or tees with web and flanges cut to shape , drilled and counter sunk for screw , including bending and welding angles as necessary , gusset plates, riveting , etc such as etc as in door frame etc confirming to Fe-290 Gde-E-165 complete all as specified and as directed. | 200 | Kg | |
| 57 | 52 | S&F 30mm thick flush shuttter, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed. | 30 | Sqm | |
| 58 | 53 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. | 15 | Sqm | |
| 59 | 54 | All as per item No. 58 here in before , but without glazing bars. | 15 | Sqm | |
| 60 | 55 | S&F 35mm thick factory made glazed and skelton door shutter open rebated of second class hard wood rail and styles , prepare to receive glass gauze etc (without sash bars) edges of framing chamfer or rounded fitted with cut and mitred beads for securing gauge etc. complete all as specified and as directed. | 10 | Sqm | |
| 61 | 56 | All as per item no. 60 above but as in window , ventilators etc. complete all as specified and directed. | 5 | Sqm | |
| 62 | 57 | S&F of mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290 etc complete all as specified and directed. | 150 | Kg | |
| 63 | 58 | S&F galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperature 1.18mm and fixed with necessary fillet complete all as directed | 24 | Sqm | |
| 64 | 59 | S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed. | 105 | Each | |
| 65 | 60 | S&F 150mm long aluminium handles, cast type, anodised complete all as specified and directed . | 70 | Each | |
| 66 | 61 | S&F 150mm long aluminium barrel tower bolts , cast type, anodised barrel tower bolt of extruded section complete all as specified and directed . | 70 | Each | |
| 67 | 62 | S&F in repair 300 mm long aluminium alloy, anodised , sliding door bolt with hasp , staple ( bolt type ) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified & directed | 5 | Each | |
| 68 | 63 | M&L for preparation of new wood surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 90 | Sqm | |
| 69 | 64 | M&L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint ) over a coat of red oxide primer complete all as specified and directed. | 45 | Sqm | |
| 70 | 65 | S&F in repair 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. | 100 | Sqm | |
| 71 | 66 | S&F in repair 4mm thick Fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc complete all as specified and directed. | 40 | Sqm | |
| 72 | 67 | M&L for preparation of old decorated wood surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and dircted | 90 | Sqm | |
| 73 | 68 | Taking down carefully existing unserviceable aluminum/copper point wiring of any description & in any position with and including existing wooden battens/conduits fixed on surface or concealed and all fittings including sunken/surface boxes & terminal boxes of any description, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including sunken boxes / junction boxes and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed. | 180 | Each point | |
| 74 | 69 | Taking down carefully existing unserviceable aluminum/copper point wiring of any descreption & in any position from existing conduits fixed on surface or concealed including accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed. | 125 | Each point | |
| 75 | 70 | Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduits (Medium grade) of size not less than 20 mm dia all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with laminated top sheet of 3 mm thick for housing of switchws, sockets, regulators etc including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. \nNOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduit to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers | 80 | Each point | |
| 76 | 71 | Description same as per Srl item No 75 above but, point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board and ditto. | 40 | Each point | |
| 77 | 72 | Description same as per Srl item No 75 above but, point wiring for 5 pin socket outlet, 5/6 Amps on same board and ditto. | 15 | Each point | |
| 78 | 73 | Description same as per Srl item No 75 above but, point wiring for one six pin switch socket outlet combination, 15Amps & 5Amp (independent) with using 2.5Sqmm (nominal area) stranded copper conductor and 1.5Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete and ditto. | 45 | Each Point | |
| 79 | 74 | Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in existing conduit as directed with using old existing sunken type pressed steel box / cast iron switch boards/terminal boxes for mounting fittings/junction boxes and wiring to be terminated in existing sunken boxes with laminated top sheet of 3 mm thick for housing of switchws, sockets, regulators etc including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed.\nNOTES : (i) The quoted rates shall be deemed to be inclusive for provision of covering existing sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers. \n(ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A' \n(iii) Quoted rate shall be deemed to include the cost of making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. | 70 | Each point | |
| 80 | 75 | Description same as per Srl item No79 above but, point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board complete all as specified and directed. | 20 | Each point | |
| 81 | 76 | Description same as per Srl item No 79 above but, point wiring for 5 pin socket outlet, 5/6 Amps on same board complete all as specified and directed. | 10 | Each point | |
| 82 | 77 | Description same as per Srl item No 79 above but point wiring for one six pin switch socket outlet combination, 15Amps & 5Amp on independent board with using 2.5Sqmm nominal area, stranded copper conductor complete all as specified and directed. | 25 | Each point | |
| 83 | 78 | Supplying & fixing for switch socket outlet combination, five pin, 5Amps, flush type, 230 volts AC circuit complete all as specified and directed.\nMake: Anchor/Cona/Havells | 60 | Each | |
| 84 | 79 | Supplying & fixing for socket outlet, five pin 2-1, 5 Amps, flush type, 230 volts AC circuit complete all as specified and directed.\nMake: Anchor/Cona/Havells | 25 | Each | |
| 85 | 80 | Supplying & fixing for switch socket outlet combination, multipurpose, three pin, 15Amps & three pin 5Amps controlled by one switch , flush type, 230 volts AC circuit complete all as specified and directed.\nMake: Anchor/Cona/Havells | 70 | Each | |
| 86 | 81 | Supplying & fixing for ceiling rose surface bakelite 63.5 x 20mm, three terminals, complete all as specified and directed.\nMake: Anchor/Cona/Havells | 100 | Each | |
| 87 | 82 | Supplying & fixing for switch flush type, 5/6 Amps, single pole, one way, 230 volts AC circuit complete all as specified and directed. \nMake: Anchor/Cona/Havells | 150 | Each | |
| 88 | 83 | Supplying & fixing for lamp holder, insulated body with back plate suitable for batten fitting complete with & including one No. CFL 15 Watt complete all as specified and directed.\nMake: Anchor/Cona/Havells | 20 | EACH JOB | |
| 89 | 84 | M&L for sub main wiring in repair using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm of voltage rating 1100 Volts drawn in and including surface PVC conduit of dia not less than 20mm/ casing caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor all as specified and directed. \nNOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. | 150 | RM | |
| 90 | 85 | Description as per item No 89 above but cable of size 6 Sqmm with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor all as specified and directed.\n(Note : Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit | 50 | RM | |
| 91 | 86 | Supplying & fixing surface and wall mounted LED batten ,extruded aluminium housing provided for effcient heat dissiption with polycarbonate diffuser & integrated electronic drive 20 watt and connecting the same two ceiling rose to three core PVC insulated and sheathed copper conductor 1.5sqmm cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface complete all as specified and directed.\nMake :Havells cat part No Enduralinearneobs 20W LED 840SPCWHor equvlaint in Bajaj /CG/Philips | 100 | Each | |
| 92 | 87 | S&F in replacement LED street light 45 watt made up of pressure dia cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seprate driver compartment with IP66 protection and resistance of IK07accessories including GI light grade tube 40mm bore bracket of required shape & size, with and connecting the fitting to electric source with using copper conductor 23/0.0076 flexible twisted twin core cable , including all accessories and fixing arrangements for fixing the light fitting to walls / pillars complete all as specified and directed.\nMake :- Bajaj Cat Part No. BRTFG 45W LED or equivalent CG/Philips/Wipro | 40 | Each | |
| 93 | 88 | Supply, fixing, connecting & testing sheet metal enclosures double door, single pole and neutral, 8 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200Amps rating including disconnecting and taking down of old unserviceable distribution board with all fitting and fixture complete all as specified and directed.\nMake :-Legrand/L&T/Havells | 12 | Each | |
| 94 | 89 | Supply, fixing, connecting & testing sheet metal enclosures double door, single pole and neutral, 4 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating including disconnecting and taking down of old unserviceable distribution board with all fitting and fixture complete all as specified and directed.\nMake :-Legrand/L&T/Havells | 6 | Each | |
| 95 | 90 | S&F MCB SPN, 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.\nMake :- Legrand/L&T/Havells | 18 | Each | |
| 96 | 91 | S&F MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.\nMake :- Legrand/L&T/Havells | 84 | Each | |
| 97 | 92 | S&F fan regulator electronic, step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed. \nMake: Anchor/Cona/Havells | 20 | Each | |
| 98 | 93 | Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed by Engineer-in-Charge. \nNOTE: Earth lead wire and its protection pipe upto and including 7.5mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’ | 5 | Each | |
| 99 | 94 | Supplying & fixing earth continuity conductor or main earthing lead fixed to walls or to poles or any other indicated situation for loop earthing with using 4mm dia GI earth wire complete all as specified and directed | 20 | RM | |
| 100 | 95 | Supply and fixing / laying GI pipe, medium grade 15mm bore fixed on walls or laid under floor complete with all accessories complete all as specified and directed.\n | 20 | RM | |
| 101 | 96 | Supplying and laying testing and commissioning in repair LT cable XLPE insulated armoured, heavy duty, aluminium conductor cable 10Sqmm 2core, 1100 volt grade fixed on walls, roof, ducts & floor complete all as specified and directed.\nMake : Havells/Polycab/Finolex/RR Kable | 150 | RM | |
| 102 | 97 | Supplying & fixing Ceilling fan 230 v ,AC,single phase complete all as specified and directed. \nMake :-Havells /Bajaj/CG | 20 | Each |
AI Tender Summary
Tender Timeline
Jan 21, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 28, 2020
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 28, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedFeb 01, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender