National Institute Of Science Education And Research has published Provision Of Kitchen Equipment Supply , Installation , Ducting , Plumbing , Civil Work And Other Allied Electrical Work For Cafeteria Of Auditorium Complex Inside Niser Campus Jatni. Submission Date for this Tender is 10-01-2020. Kitchen Equipment Tenders in NISER Bhubaneswar/Jatni Odisha. Bidders can get complete Tender details and download the document.
| Name of Work: “Provision of Kitchen equipment supply, installation, ducting, plumbing, civil work, and other allied electrical work for Cafeteria of Auditorium complex inside NISER campus Jatni” | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | WEIGHING SCALE LOAD :- 75/150 kg Heavy duty platform scale with stainless steelATCO MAKE MODEL-D15AP75/150W | Item1 | 1 | NOS |
| 2 | 2 | STORAGE RACK - SHELVES 5 NOS. OF 18 SWG S.S. SHEET EQUIDISTANT FROM EACH OTHER,DULY STRENGTHENED WITH STAINLESS STEEL STIFFENERS FROM BENEATH, UPRIGHTS : 30X30MM STAINLESS STEEL SQUARE PIPES WITH ADJUSTABLE NYLON BULLET FEET. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S.950X600X1800 | Item2 | 1 | NOS |
| 3 | 3 | STORAGE RACK, SHELVES : 5 NOS. OF 18 SWG S.S. SHEET EQUIDISTANT FROM EACH OTHER,DULY STRENGTHENED WITH STAINLESS STEEL STIFFENERSFROM BENEATH, UPRIGHTS : 30X30MM STAINLESS STEEL SQUARE PIPES WITH ADJUSTABLE\nNYLON BULLET FEET. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S.1050X600X1800 | Item3 | 3 | NOS |
| 4 | 4 | GRAIN PALLET CORNER PIECE-14SWG SS (150x150MM) CORNER PIECE,FOR ADDITIONAL STRENGTHENING, SS PIPE-(25X25) MM SQUARE PIPE @75 MM CLEAR DISTANCE FROM EACH OTHER, LEGS-(30X30 MM)SS SQUARE PIPE WITH ADJ NYLON BULLET FEET. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1200X1200X300 | Item4 | 2 | NOS |
| 5 | 5 | 2 DOOR VERTICAL REFRIGERATOR, STANDARD - 500 LRTS.\nFORCED DRAFT COOLING, CAPACITY-500 LTR TO ACCOMMODATE 1/1 GN PANS ON ANGLES. TEMPERATURE RANGE- (+4 TO +8 DEGREE CELSIUS) INNER 20SWG SS, OUTER CABINET -OUTER AND DOOR 20 SWG SS, INSULATION-2 1/2 " THICK IN-SITU POLYURETHANE FOAM, DOORS-2 DOOR SPRING LOADED FOR SELF CLOSING WITH GODREJ LOCKING ARRANGEMENT, WIRE SELVES- SS 8NOS, COMPRESSOR-HARMETICAL SEALED 3/8 HP KIRLOSKAR.DRAIN PLATE TO BE PROVIDED. LEGS-1 1/2" SS ROUND PIPE WITH ADJUSTABLE BULLET FEET. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S.675X825X2100 | Item5 | 1 | NOS |
| 6 | 6 | 2 DOOR VERTICAL FREEZER , STANDARD - 500 LRTS,CAPACITY-500 LTR TO ACCOMMODATE 1/1 GN PANS ON ANGLES, TEMPERATURE RANGE- (-18 TO -22 DEGREE CELSIUS) INNER -20SWG SS, OUTER CABINET -OUTER AND DOOR 20 SWG SS, INSULATION-2 1/2 " THICK IN-SITU POLYURETHANE FOAM, DOORS-2 DOOR SPRING LOADED FOR SELF CLOSING WITH GODREJ LOCKING ARRANGEMENT, WIRE SELVES- SS 8NOS, COMPRESSOR-HARMETICAL SEALED 3/8 HP KIRLOSKAR.DRAIN PLATE TO BE PROVIDED. LEGS-1 1/2" SS ROUND PIPE WITH ADJUSTABLE BULLET FEET. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S.675X825X2100 | Item6 | 1 | NOS |
| 7 | 7 | WORK TOP REFRIGERATOR FORCED DRAFT COOLING, SPECIFICATION :-\nTOP : 16 SWG STAINLESS STEEL TOP WITH SPLASH BACK, TEMPERATURE RANGE- (+4 TO +8 DEGREE CELSIUS),INNER -20SWG SS, INSULATION-2 1/2 " THICK IN-SITU POLYURETHANE FOAM, DOORS-3 NOS. INSULATED DOORS WITH INTEGRATED HANDLE& SPRING LOADED DOORS FOR SELF CLOSING WITH GODREJ OR EQUIVALENT LOCKING. TO ACCOMMODATE 1/1 GN PAN ON ANGLE. AMBIENT DRAWER : 1NO. AMBIENT DRAWER WITH INTEGRATED HANDLE &1/1X150MM DEEP GN PAN COMPATIBLE WITH GODREJ OR EQUIVALENT LOCKING, COMPRESSOR :1 NO. HERMETICALLY SEALED-KIRLOSKAR OR ANY REPUTED BRAND L.H.S. ELECTRIC : I PHASE /220V/ 50 CYCLES.* DRAIN PLATE TO BE PROVIDED, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1875X700X850+150 | Item7 | 1 | NOS |
| 8 | 8 | TWO TIER WALL SHELF SHELF : 18 SWG STAINLESS STEEL, 3 SIDES BEEDED UPWARD AND FRONT BEEDED TWICE DOWNWARD. BRACKETS : 4+4 NOS. S.S. BRACKETS EACH SHELF FIXING : FIX TO WALL WITH ANCHOR FASTNERS, SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S2300X300 WIDE | Item8 | 1 | NOS |
| 9 | 9 | WORK TABLE WITH 2 UNDER SHELVES :- TOP- 16SWG SS TOP WITH SPLASH BACK,UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS,LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.\nNYLON BULLET FEET,FRAME WORK-35X35X3 MM THICK SS ANGLE.SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S600X800X850+150 | Item9 | 1 | NOS |
| 10 | 10 | CHAPATTI PLATE PUFFER WITH 1 UNDER SHELF TOP- 14 SWG SS TOP WITH SPLASH BACK, CHAPATI PLATE-SIZE 900X700X25 MM THICK MILD STEEL,PUFFER PLATE-300X700X40 MM THICK CAST IRON, FRONT PLATE-18 SWG SS WITH IGNITION WINDOW,GREASE COLLECTING DRAWER 18 SWG (REMOVABLE), SIDE & REAR-18 SWG SS,BURNERS-2 NOS V BURNERS,V 600 MM LONG WITH PILOT, 1 NOS V BURNER , V 600 MM LONG WITH PILOT, UNDER SHELVES- 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1200X800X850+150 | Item10 | 1 | NOS |
| 11 | 11 | EXHAUST HOOD WITH FRESH AIR (DOUBLE SKIN), FRAME WORK :112"X112"X3 MM FULLY WELDED BOXED S.S. ANGLE FRAME WORK\nBODY :18 SWG POLISHED S.S. FULLY WIELDED BODY CONSTRUCTION,WITH GREASE COLLECTION TRAY AND FILTER FIXTURES.\nGREASE FILTER : REMOVABLE 18 GA S.S. WIDE SECTIONS COMPATIBLE TO THE LENGTH OF THE HOOD, OPEN ABLE TYPE FOR EASY CLEANING.BAFFLE TYPE\nFRESH AIR : FRESH AIR DUCTING CONNECTED TO THE HOOD LIGHTS : LED 36 WATTS FIXTURES , CLEAN ROOM TYPE - 2 NOS\nFIXING : SUSPENDED FROM CEILING ON M.S. RODS DULY PAINTED ON ANCHOR FASTENERS.\n* THE UNIT TO BE FULLY ARGON ARC WELDED AND SATIN FINISHED BUFFING . SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S\n1500X1150X600 | Item11 | 1 | NOS |
| 12 | 12 | WORK TABLE WITH 2 UNDER SHELVES- TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS,WORK TABLE WITH 2 US-, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE.SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S600X800X850+150 | Item12 | 1 | NOS |
| 13 | 13 | MARBLE CHAPATTI ROLLING TABLE ON WHEEL TOP-MARVEL TOP 1 1/2 THICK(Two 3/4" GRAINTE PASTED TOGETHERWITH EPOXY STONE MOUNTED ON 35X35X3 MM THICK SS ANGLE FRAME,RECTANGLE PIPE25X25X16 SWG SS PIPE, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS, UPRIGHT-30X30 MM SS PIPE,CASTOR -4 NOS PLATE FITTED 125 MM DIA RUBBERSIED SWIVEL CASTORS 2 NOS WITH BRAKES, FRAME WORK-35X35X3 MM THICK SS ANGLE,SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1500X700X850 | Item13 | 1 | NOS |
| 14 | 14 | WORK TABLE WITH 2 UNDER SHELVES- TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.\nNYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S600X800X850+150 | Item14 | 1 | NOS |
| 15 | 15 | SINGLE BURNER CHINESE RANGE TOP-16 SWG SS SHUNK IN TOP WITH SPLASH, BURNER-1 NOS HIGH PRESSURE BURNER WITH HEAT OUT PUT @ 100000 BTU/HOUR & 1 NOS LOW PRESSURE BURNER WITH OUTPUT 21,000 BTU/HOUR(UNITTED MAKE OR EQUIVALENT)WITH INDIVIDUAL PILOT AND CAST IRON VESSEL PLATE , VESSEL PLATE-1 NOS CHINES VESSEL REST OF SIZE 450 MM DIA,AND 1 NOS CAST IRON VESEL REST OF SIZE 350X350MM, FRONT AND CONTROL PANEL- 18 SWG SS, SIDE AND REAR-20 SWG SS, DRIP TRAY-18 SWG SS WITH INTIGRATED HANDLE,LEGS : 30X30X16 MM STAINLESS STEEL SQUARE PIPE WITH ADJ. UNDER SHELVES- 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS\nNYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE. DRAIN CHANEL-FULL LENGTH X 100M WIDE X 100 MM DEEP 16 SWG SS DRAIN CHANEEL SLOPING 25 MM TOWARD DRAIN AND 38 MM DRAIN PIPE CONNECTED TO FLOOR DRAIN REMOVEBLE SSPERFORETED LIDWITH FINGER HOLES , FAUCET -SWAN NAKE FAUCET 450 MM LONG SWIVEL ,SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1200X800X750+250 | Item15 | 1 | NOS |
| 16 | 16 | WORK TABLE WITH SINK TOP- 16SWG SS TOP WITH SPLASH BACK,SINK-1 NOS 450X450X250 MM DEEP WITH DRAIN COUPLING &SINGLE SWIVEL FAUCET DRAIN TOWARD REAR SIDE SINK WITH STRAINER BASKET, STRAINER BASKET-18 SWG SS STRAINER ,BASKET 40 MM DEEP-(3 MM HOLE READY PERFORATED SHEET COMPATIBLE TO THE SHINK), UNIT TO BE SUPPLIED WITH FAUCET-CROSS BRACING 25X25 MM SS SQUARE PIPE.LEGS : 30X30X16 MM STAINLESS STEEL SQUARE PIPE WITH ADJ NYLON BULLET FEET,FRAME WORK-35X35X3 MM THICK SS ANGLE1200X800X850+150 | Item16 | 1 | NOS |
| 17 | 17 | TANDOOR-COAL TOP- MADE OF GRANITE TOP, OUTER BODY-18 SWG SS WITH 5 MM SS FRAME WORK TOP DULY CLADDED WITH WOODEN SKIRTING FOR BODY PROTECTION, INNER LINING- 2 MM MS AT 50 MM FROM OUTER BODY DULY FILLED WITH BLANKED GLASS WOOL. TANDOOR-CONVENTIONAL KING SIZE PRE BAKED EARTHERN TANDOOR POT , INSULATION- PROVIDE DENSE INSULATION OF A MIX OF BROKEN GLASS ,SALT SAND DULY FITTED WITH OVEN BRICK AND CEMENT, BASE-5 MM MS PLATE WITH FRAME WORK. ASH TRAY-20SWG SS REMOVABLE AS COLLECTION TRAY. CASTOR-4" DIA ALL SWIVEL RUBBERIZED CASTOR (ALL SWIVEL WITH 2 NOS BRAKES) WITH RUBBER BUMPER AT ALL 4 CORNER.900X900X1000 | Item17 | 2 | NOS |
| 18 | 18 | WORK TABLE WITH 2 US TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS,, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET,FRAME WORK-35X35X3 MM THICK SS ANGLE. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S600X900X1000+150 | Item18 | 1 | NOS |
| 19 | 19 | EXHAUST HOOD WITH FRESH AIR FRAME WORK :1*1/2"X1*1/2"X3 MM FULLY WELDED BOXED S.S. ANGLE FRAME WORK\nBODY :18 SWG POLISHED S.S. FULLY WIELDED BODY CONSTRUCTION,WITH GREASE COLLECTION TRAY AND FILTER FIXTURES.\nGREASE FILTER : REMOVABLE 18 GA S.S. WIDE SECTIONS COMPATIBLE TO THE LENGTH OF THE HOOD, OPEN ABLE TYPE FOR EASY CLEANING.BAFFLE TYPE\nFRESH AIR : FRESH AIR DUCTING CONNECTED TO THE HOOD LIGHTS : LED 36 WATTS FIXTURES , CLEAN ROOM TYPE - 6 NOS\nFIXING : SUSPENDED FROM CEILING ON M.S. RODS DULY PAINTED ON ANCHOR FASTENERS.\n* THE UNIT TO BE FULLY ARGON ARC WELDED AND SATIN FINISHED BUFFING . SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S5600X1400X600 | Item19 | 1 | NOS |
| 20 | 20 | THREE BURNER RANGE WITH 1 UNDER SHELF TOP-16 SWG SS TOP WITH SPLASH,BURNER-2 NOS HIGH PRESSURE T35 BURNER WITH HEAT OUT PUT @ 70,000 BTU/HOUR & 1 NOS LOW PRESSURE BURNER WITH OUTPUT 21,000 BTU/HOUR(UNITTED MAKE OR EQUIVALENT)WITH INDIVIDUAL PILOT AND GAS INLET ON REAR , VESSEL PLATE-3 NOS CAST IRON VESSEL REST OF SIZE 400 MM X400MM WIDE , FRONT AND CONTROL PANEL- 18 SWG SS, SIDE AND REAR-20 SWG SS, DRIP TRAY-18 SWG SS WITH INTIGRATED HANDLE, LEGS : 30X30X16 MM STAINLESS STEEL SQUARE PIPE WITH ADJ.UNDER SHELVES- 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE. INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1600X800X850+150 | Item20 | 1 | NOS |
| 21 | 21 | WORK TABLE WITH 2 US TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS,WORK TABLE WITH 2 US-, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S600X800X850+150 | Item21 | 1 | NOS |
| 22 | 22 | DEEP FAT FRYER TOP-16 SWG SS SUNK IN WITH CUT OUT TO HOUSE TO OIL TANK. HEATERS- 2 NOS OIL IMMERSED HEATER ,ELE4.5 KW EACH THREE PHASE THERMOSTATIC CONTROL, OIL TANK-OIL TANK OF 8 LTR CAPACITY EACH 1/2" SIZE 200 MM DEEP G.N PAN REMOVABLE, FRONT-18 SWG SS, UNDER SHELVES-18 SWG SS, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS600X800X850+150 | Item22 | 1 | NOS |
| 23 | 23 | WORK TABLE WITH 2 US TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S500X800X850+150 | Item23 | 2 | NOS |
| 24 | 24 | BULK KADAI FRYER TOP- 16 SWG SS TOP WITH CUTOUT TO HOUSE RING TYPE CAST IRON VESSEL REST. KADAI-HEAVY DUTY MS FRYING KADAI OF APPROX SIZE 550 MM DIA READY MADE, BURNER- 1NOS HP M-22 WITH HEAT OUTPUT @ 42,000 BTU/HR WITH INDIVIDUAL GAS INLET AT REAR SIDE, FRONT AND CONTROL PANEL-18 SWG SS, SIDE AND REAR -20 SWG SS, DRIP TRAY-20 SWG SS UNDER BURNER WITH 18 SWG SS INTEGRATED HANDLE, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE, NOTE-KADAI TO FIT PROPERLY IN TO UNIT NACESSARY GAP BETWEEN KADAI AND TOP FOR HOT AIR TO ESCAPE800X800X750 | Item24 | 1 | NOS |
| 25 | 25 | FOUR BURNER RANGE WITH OVEN TOP-16 SWG SS WITH GN STAND AND CUT OUT TO HOUSE BURNER AND VESSEL REST, BURNER- 2 NOS HIGH PRESSURE T35 BURNER WITH HEAT OUT PUT @ 70,000 BTU/HOUR &2 NOS T-22 BURNER WITH OUTPUT 42,000 BTU/HOUR(UNITTED MAKE OR EQUIVALENT)WITH INDIVIDUAL PILOT AND GAS INLET ON REAR, ELECTRIC OVEN-4.5 KW 3 PHASE, VESAL REST- 300X 300MM WIDE, FRONT AND CONTROL PANEL-18 SWG SS, SIDE AND REAR -20 SWG SS, DRIP TRAY-20 SWG SS UNDER BURNER WITH 18 SWG SS INTEGRATED HANDLE, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE, 800X800X850+150 | Item25 | 1 | NOS |
| 26 | 26 | EXHAUST HOOD WITH FRESH AIR FRAME WORK : 1 1/2"X1 1/2"X3 MM FULLY WELDED BOXED S.S. ANGLE FRAME WORK\nBODY :18 SWG POLISHED S.S. FULLY WIELDED BODY CONSTRUCTION,WITH GREASE COLLECTION TRAY AND FILTER FIXTURES.\nGREASE FILTER : REMOVABLE 18 GA S.S. WIDE SECTIONS COMPATIBLE TO THE LENGTH OF THE HOOD, OPEN ABLE TYPE FOR EASY CLEANING.BAFFLE TYPE\nFRESH AIR : FRESH AIR DUCTING CONNECTED TO THE HOOD LIGHTS : LED 36 WATTS FIXTURES , CLEAN ROOM TYPE - 6 NOS\nFIXING : SUSPENDED FROM CEILING ON M.S. RODS DULY PAINTED ON ANCHOR FASTENERS.\n* THE UNIT TO BE FULLY ARGON ARC WELDED AND SATIN FINISHED BUFFING . SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S5600X1350X600 | Item26 | 1 | NOS |
| 27 | 27 | WORK TOP REFRIGERATOR WITH 2 OHS & 2 NOS 700MM LONG RR TOP : 16 SWG STAINLESS STEEL TOP, TEMPERATURE RANGE- (+4 TO +8 DEGREE CELSIUS),INNER & EXTERIOR -20SWG SS, INSULATION- 2 *1/2 " THICK IN-SITU POLYURETHANE FOAM, DOORS-3 NOS. INSULATED DOORS WITH INTEGRATED HANDLE& SPRING LOADED DOORS FOR SELF CLOSING WITH GODREJ OR EQUIVALENT LOCKING. AMBIENT DRAWER : 1NO. AMBIENT DRAWER 1/1X150MM DEEP GN PAN ON SS TELESCOPIC CHANEL COMPRESSOR :1 NO. HERMETICALLY SEALED-KIRLOSKAR OR ANY REPUTED BRAND L.H.S.ELECTRIC : I PHASE /220V/ 50 CYCLES.* DRAIN PLATE TO BE PROVIDED,LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.\nNYLON BULLET FEET. RADIATION REFLECTOR- 2 NOS 750 MM LONG WITH THERMOSTATE TO BE OPERATED AT 2.25 KW EACH, SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1875X700X850+450+300 | Item27 | 2 | NOS |
| 28 | 28 | WORK TOP REFRIGERATOR WITH 2 OHS TOP : 16 SWG STAINLESS STEEL TOP, TEMPERATURE RANGE- (+4 TO +8 DEGREE CELSIUS),INNER & EXTERIOR -20SWG SS, INSULATION- 2 *1/2 " THICK IN-SITU POLYURETHANE FOAM, DOORS-3 NOS. INSULATED DOORS WITH INTEGRATED HANDLE& SPRING LOADED DOORS FOR SELF CLOSING WITH GODREJ OR EQUIVALENT LOCKING. AMBIENT DRAWER : 1NO. AMBIENT DRAWER 1/1X150MM DEEP GN PAN ON SS TELESCOPIC CHANEL COMPRESSOR :1 NO. HERMETICALLY SEALED-KIRLOSKAR OR ANY REPUTED BRAND L.H.S.ELECTRIC : I PHASE /220V/ 50 CYCLES.* DRAIN PLATE TO BE PROVIDED,LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.\nNYLON BULLET FEET. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1875X700X850+450+300 | Item28 | 1 | NOS |
| 29 | 29 | WORK TABLE WITH SINK WITH 2 OHS TOP- 16SWG SS TOP WITH SPLASH BACK, SINK-1 NOS 450X450X250 MM DEEP WITH DRAIN COUPLING &SINGLE SWIVEL FAUCET DRAIN TOWARD REAR SIDE SINK WITH STRAINER BASKET, STRAINER BASKET-18 SWG SS STRAINER ,BASKET 40 MM DEEP-(3 MM HOLE READY PERFORATED SHEET COMPATIBLE TO THE SHINK), UNIT TO BE SUPPLIED WITH FAUCET-OVER HEAD SHELF- 2 NOS 18 SWG SS TOP BEEDING THREE SIDE UP ONE SIDE DOWN & 25 X 25 MM SQUARE PIPE , UNDER SHELVES -2 NOS APPROX 600MM LONG 18 SWG SS ALL SIDE BEEDED TWICE DOWNWARD. CROSS BRACING 25X25 MM SS SQUARE PIPE. LEGS : 30X30X16 MM STAINLESS STEEL SQUARE PIPE WITH ADJ NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE1200X700X850+450+300 | Item29 | 1 | NOS |
| 30 | 30 | WORK TABLE WITH 2 US & 2 OHS TOP- 16SWG SS TOP, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS, OVER HEAD SHELVES-2 NOS 18 SWG SS,BEEDED THREE SIDE UP ONE SIDE DOWN & 25X 25 MM SQ SS PIPE. , LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1500X700X850+450+300 | Item30 | 1 | NOS |
| 31 | 31 | DOSA PLATE TOP : 16 SWG STAINLESS STEEL TOP.\nBURNERS : 2 NOS. V-750 BURNERS WITH PILOT AND GAS INLET ON\nREAR SIDES\nHOT PLATE : 5/8"THICK MILD STEEL DULY MACHINED AND\nPOLISHED STAINLESS STEEL SPLASH FOR PLATE.\nUNDER SHELF : 1 NO. 18 SWG STAINLESS STEEL, ALL SIDES BEEDED TWICE DOWNWARDS.\nSIDES & REAR : 20 SWG STAINLESS STEEL WITH LOUVERS.\nDRIP TRAY : 20 SWG S.S. UNDER BURNER WITH 18 SWG S.S.\nINTEGRATED HANDLE.\nLEGS : 30X30MM STAINLESS STEEL SQUARE PIPES WITH\nADJUSTABLE NYLON BULLET FEET.\nFRAMEWORK : 35X35X3 MM THICK STAINLESS STEEL ANGLE, SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S900X750X850+150 | Item31 | 2 | NOS |
| 32 | 32 | WORK TABLE WITH 2 US TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS,WORK TABLE WITH 2 US-, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S700X750X850+150 | Item32 | 1 | NOS |
| 33 | 33 | WORK TABLE WITH 2 US TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS,WORK TABLE WITH 2 US-, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE. PECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1200X750X850+150 | Item33 | 1 | NOS |
| 34 | 34 | IDLI MACHINE GAS 6 NOS 22 SWG IDLY TRAY (15 IDLY EACH) SIZE- 12 7/8" X 20 7/8", 6 NOS 18 SWG ALUMINIUM TRAY SIZE- 12 5/8" X 20 5/8" CAPACITY- 90 IDLIES | Item34 | 1 | NOS |
| 35 | 35 | EXHAUST HOOD WITH FRESH AIR - FRAME WORK : 1 1/2"X1 1/2"X3 MM FULLY WELDED BOXED S.S. ANGLE FRAME WORK\nBODY :18 SWG POLISHED S.S. FULLY WIELDED BODY CONSTRUCTION,WITH GREASE COLLECTION TRAY AND FILTER FIXTURES.\nGREASE FILTER : REMOVABLE 18 GA S.S. WIDE SECTIONS COMPATIBLE TO THE LENGTH OF THE HOOD, OPEN ABLE TYPE FOR EASY CLEANING.BAFFLE TYPE\nFRESH AIR : FRESH AIR DUCTING CONNECTED TO THE HOOD LIGHTS : LED 36 WATTS FIXTURES , CLEAN ROOM TYPE - 2 NOS\nFIXING : SUSPENDED FROM CEILING ON M.S. RODS DULY PAINTED ON ANCHOR FASTENERS.\n* THE UNIT TO BE FULLY ARGON ARC WELDED AND SATIN FINISHED BUFFING .SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S3600X950X600 | Item35 | 1 | NOS |
| 36 | 36 | WORK TOP REFRIGERATOR WITH COLD WELL & 2 OHS TOP : 16 SWG STAINLESS STEEL TOP .\nGN PAN : GN PAN 1/6X100MM 10 GN PAN ELEVATED...WITH INSULATED COLD WELL\n* UNIT TO BE SUPPLIED WITH GN PANS & LIDS.\nTEMPERATURE RANGE- (+4 TO +8 DEGREE CELSIUS)\nINNER & EXTERIOR : 20 SWG S.S. INSULATION-2 1/2 " THICK IN-SITU POLYURETHANE FOAM\nDOORS : 3 NOS. INSULATED DOORS WITH INTEGRATED HANDLE & SPRING LOADED DOORS FOR SELF CLOSING WITH GODREJ OR EQUIVALENT LOCKING.TO ACCOMODATE 1/1 GN PAN ON ANGLES.\nAMBIENT DRAWER : 1NO. 1/1X150MM DEEP GN PAN ON STAINLESS STEEL TELESCOPIC CHANNEL.\nCOMPRESSOR : 1 NO. HERMETICALLY SEALED - KIRLOSKAR OR ANY REPUTED BRAND L.H.S. ELECTRIC : I PHASE /220V/ 50 CYCLES.\n* DRAIN PLATE TO BE PROVIDED.\nLEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S1875X700X850+450+300 | Item36 | 1 | NOS |
| 37 | 37 | MICROWAVE SPECIFICATION Model RMS510TS UPC Code 728028020830\nConfiguration Countertop\nControl System Touch\nProgrammable Control Pads 10\nSettings Programmable 20\nMax. Cooking Time 60:00\nPower Levels 5\nDefrost Yes\nTime Entry Option Yes\nMicrowave Distribution Rotating stirrer, bottom\nMagnetron 1\nDisplay LED\nStage Cooking Yes, 3\nInterior Light Yes\nDoor Handle Grab & Go\nSignal End of cycle, adjustable\nExterior Dimensions H 311 (12 1/4”) W 508 (20”) D* 419 (16 1/2”)\nCavity Dimensions H 197 (7 3/4”) W 330 (13”) D 330 (13”)\nDoor Depth 737 (29”), 90o+ door open\nUsable Cavity Space 23 liter (0.8 cu. ft.)\nExterior Finish Stainless steel wrap\nInterior Finish Stainless steel\nPower Consumption 1500 W, 7.3 A\nPower Output** 1000 W** Microwave\nPower Source 230V, 50 Hz, 16 A single phase Plug Configuration / Cord CEE 7/7 1.5 m (5 ft.)\nFrequency 2450 MHzMAKE - MENUMASTER MODEL - RMS510TS | Item37 | 1 | NOS |
| 38 | 38 | SANDWICH GRILLER DEEP TRAY OF SIZE (12" x 1) (1/4"X7/8 ") HT BODY SS CONSTRUCTION , G.I COVER FROM BASE ,HANDLE,ON/OFF SWITCH,INDICATING LAMP,THERMOSTATE ,NYLON BUSH | Item38 | 2 | NOS |
| 39 | 39 | WORK TABLE WITH SINK & 2 OHS TOP- 16SWG SS TOP WITH SPLASH BACK, SINK-1 NOS 450X450X250 MM DEEP WITH DRAIN COUPLING &SINGLE SWIVEL FAUCET DRAIN TOWARD REAR SIDE SINK WITH STRAINER BASKET, STRAINER BASKET-18 SWG SS STRAINER ,BASKET 40 MM DEEP-(3 MM HOLE READY PERFORATED SHEET COMPATIBLE TO THE SHINK),UNIT TO BE SUPPLIED WITH FAUCET- OVER HEAD SHELF- 2 NOS 18 SWG SS TOP BEEDING THREE SIDE UP ONE SIDE DOWN & 25 X 25 MM SQUARE PIPE , UNDER SHELVES -2 NOS APPROX 600MM LONG 18 SWG SS ALL SIDE BEEDED TWICE DOWNWARD.CROSS BRACING 25X25 MM SS SQUARE PIPE. LEGS : 30X30X16SWG STAINLESS STEEL SQUARE PIPE WITH ADJ NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S1800X700X850+150 | Item39 | 1 | NOS |
| 40 | 40 | CITRUS JUICER Citrus juicer to use everywhere you need a freshly squeezed citrus juice:\nhealth food stores, hotels, bars, restaurants, institutions...\nCommercial juicer, built to last, with a heavy duty and quiet induction\nmotor.\nDelivered with 3 removable squeezers for oranges, lemons, limes and\ngrapefruits.\nEasy to clean: removable bowl, grid and squuezer.\nSpout height: 135 mm (5"), to make juice in a glass.\nAverage output: 30 l/h\nMotor\nSingle phase\n100 - 120 V - 50/60 Hz - 155 W\n220 - 240 V - 50/60 Hz - 130 W\nSpeed:\n1500 rpm (50 Hz)\n1800 rpm (60 Hz)\nWeight\nNet: 5,2 kg (11 lbs)\nPacked: 6 kg (12,3 lbs)\nDimensions\nD: 340 mm (13,4")\nW: 255 mm (10")\nH: 400 mm (15,7")\nPacked\nD: 340 mm (13,4")\nW: 255 mm (10")\nH: 400 mm (15,7")MAKE- SANTOS MODEL-CITRUS -38 | Item40 | 1 | NOS |
| 41 | 41 | VACCUM BLENDER Model SV-500E, SV-510E, SV-520E, SV-530E,\nSV-500B, SV-510B, SV-520B, SV-530B, SV-500\nColor Metal Silver\nType High-Speed Quiet VACUUM BLENDER\nSpeed 2,000~20,000RPM (Max 32,000RPM)\nWattage 1500W\nVoltage AC220~240V / 50~60Hz\nDimensions 216 x 240 x 443(mm)\nWeight 6.2kg\nCapacity 1.9L (Real capacity 1.5L)\nContainer\ncapacity\nMaximum capacity of blend: 1300ml / maximum capacity of grinding: 500ml\nMaterials Ultem, Tritan, ABS, PCKUVINS | Item41 | 1 | NOS |
| 42 | 42 | COLD PRESS JUICER 24 hours of continuous operation\nThe 88mm flip gate – Wide feed chute\nStylish & sleek design for cafes, restaurants, or juice bars\nEfficient slow-squeezing extractor cold-presses the maximum amount\nof juice\nA rotating cleaning brush for easier cleaning\nSmart Cap for combining juices and preventing leaks.\nSafety-lock & Cooling system\nQuiet operation\n3 in 1 Multi- Function : Juice, Smoothie, Sorbet (Included)MAKE- KUVINS MODEL-CS600 | Item42 | 1 | NOS |
| 43 | 43 | WORK TABLE WITH 2 U/S TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS,WORK TABLE WITH 2 US-, LEGS : 30X30MM STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1800X700X850+150 | Item43 | 1 | NOS |
| 44 | 44 | COFFEE GRINDER Grinder-doser with flat grinding blades\n– Suitable for bars with medium-high consumption needs\n– Stepless micrometrical grinding adjustment\n– On demand grinding\n– Electronic dose adjustment\n– Single and double dose with independent adjustment\n– Digital display with shot counter\n– Ventilation device with electronic control to keep the motor\ncool\nTechnical data\nVoltage V 110 / 230\nRated power W 650\nGrinding burrs Ø mm / in 83 / 3.26 flat\nGrinding burrs speed giri/min / rpm 1400 (50 Hz)\n1600 (60 Hz)\nHopper capacity of\ncoffee beans Kg / lbs 1.8 / 4\nDose adjustment g 0 - 70\nWidth mm / in 214 / 8.4\nDepth mm / in 292 / 11.5\nHeight mm / in 635 / 25\nNet weight kg / lbs 20 /44\nShipping weight kg / lbs 21.5 / 48MAKE- ASTORIA MODEL-MAJOR E | Item44 | 1 | NOS |
| 45 | 45 | COFFEE MACHINE Frame construction: electroplated steel assembled without welding\nSteam wands: stainless steel\nOuter body: baked enamel stainless steel\nEquipment kit: connecting hoses, drain line, portafilters, blind filter\nbasket, and BWT water filter cartridge and filter head supplied with\nmachine\nMotor pump: built-in water cooled motor and adjustable vane pump\nTechnical data\nBoiler capacity (qts) 11.1\nVoltage, Single Phase, 60 Cycle (V) 230\nAmps Rating (Amps) 19.6\nHeating Element (W) 4000\nTotal Wattage (W) 4400\nElectrical Cord Length (ft.) 5\nWidth (in) 30\nDepth (in) 22.25\nHeight (in) 22\nAdjustable legs (in) 4\nCup Height -group head to drain tray- (in) 5.75\nNet Weight (lbs) 151\nShipping Weight with Water Softener (lbs) 207MAKE- ASTORIA MODEL-AEP 2 SEMIAUT | Item45 | 1 | NOS |
| 46 | 46 | WATER FILTERBY OTHERS | Item46 | 1 | NOS |
| 47 | 47 | WORK TABLE WITH 2 U/S TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS,WORK TABLE WITH 2 US-, LEGS : 30X30MM 16 SWG STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S1500X700X850+150 | Item47 | 1 | NOS |
| 48 | 48 | WORK TABLE WITH 2 U/S TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS,WORK TABLE WITH 2 US-, LEGS : 30X30MM 16 SWG STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE.SPECIAL1350X700X850+150 | Item48 | 1 | NOS |
| 49 | 49 | CHEST FREEZER Range: Hard Top: 75, 110, 220, 320, 425 and 500 litres\nDisplay: 220, 320 and 425 litres·\n? Robust construction\n? Corrosion resistant pre-coated GI cabinet\n? Tropicalised for high ambient conditions\n? Lockable lid\n? Double door option available in higher capacities\n? Eco-friendly refrigerant R-134aBLUE STAR CHF - 320 | Item49 | 1 | NOS |
| 50 | 50 | VISI COOLER BLUE STAR VC 350 MODEL – VC 350\nGLASS CAPACITY – 336\nTANK VOLUME - 295\nTEMPERATURE RANGE- 2°C TO 8°C\nPOWER SUPPLY –230/1/50\nREFRIGERANT -R134A\nDOORS - 1\nMIXIMUM AMBIENT/RELATIVE HUMIDITY -41°C TO 75°C\nNUMBER OF SHELVES (STANDARD)-4\nEXTERNAL DIMENSIONS – 575X710X1700MM\nNET WEIGHT/GLASS WEIGHT -98/104\nPROVISION FOR LOCKING- OPTIONAL – AVAILABLE\nINTERNAL LIGHT - AVAILABLE\nADJUSTABLE FEET/ROLLER – ROLLER\nTEMPERATURE CONTROL - ELECTRO-MECHINICAL\nSHELF TYPE – ADJUCTABLE\nFeatures\nUV protected galvanised sheets for interior and exterior\nAdjustable plastic-coated wire mesh shelves\nEnergy-efficient cooling unit\nEco-friendly refrigerant (R134a)\nUniform cooling by forced air circulation\nClear product visibility with dual glass\nSelf-closing door\nCanopy for merchandising with rear illumination\nTested for higher ambient and outdoor conditions575X710X1700 | Item50 | 1 | NOS |
| 51 | 51 | WORK TABLE WITH 2 OHS TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES -2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS SQUARE PIPE , OVER HEAD SHELF- 2 NOS 18 SWG SS TOP BEEDING THREE SIDE UP ONE SIDE DOWN & 25 X 25 MM SQUARE PIPE, LEGS : 30X30MM 16 SWG STAINLESS STEEL SQUARE PIPE WITH ADJ NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S1800X600X850+450+300 | Item51 | 1 | NOS |
| 52 | 52 | MOBILE TABLE TOP- 16SWG SS TOP, UNDER SHELVES -2 NOS 18 SWG SS,ALL SIDE BEEDED DOWNWARDS CASTOR - 4 NOS PLATE FITTED 100 MM DIA SWIVEL CASTORS 2 NOS WITH BRAKE , LEGS : 30X30MM 16 SWG STAINLESS STEEL SQUARE PIPE WITH ADJ NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY1500X450X850 | Item52 | 1 | NOS |
| 53 | 53 | WORK TABLE WITH 2 U/S TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS,WORK TABLE WITH 2 US-, LEGS : 30X30MM 16 SWG STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE.SPECIAL750X700X850+150 | Item53 | 1 | NOS |
| 54 | 54 | VEG PROCESSOR Prepare 1200 plus servings in 3 hours or less. Continuous feed unit\ndesigned for quality, continuous feed slicing, dicing, shredding,\ngrating, French fry and julienne. Accommodates 34 different\nprocessing plates.\nPower: 1.5 HP—Single phase.\nSpeed: 425 rpm.\nInduction motor: Magnetic safety system and motor brake. Stainless\nsteel motor base. Automatic restart of the machine with the kidney shaped\npusher.\nDelivered with :All metal vegetable prep attachment with a kidney shaped\nhopper (L × W—7 6.6" × 3") and a cylindrical hopper (diameter 2\n5/16").discs included : C446SA (3mm) 1/8" slicing disc and C450GPA\n(3mm) 1/8" grating discComplete selection of 40 discs available.\nProcessor has dicing and French fry capabilities.\nCube : 3.57\nApprox. shipping weight—53 lbs\nApprox. carton size : (H×L×W) : 24 1/2" × 15 3/4" × 16"MAKE-ROBO COUPE MODEL-CL-50E ULTRA | Item54 | 1 | NOS |
| 55 | 55 | WORK TABLE WITH SINK TOP- 16SWG SS SINK IN TOP SINK-1 NOS 700X500X250 MM DEEP WITH DRAIN COUPLING &SINGLE SWIVEL FAUCET DRAIN TOWARD REAR SIDE SINK WITH STRAINER BASKET, STRAINER BASKET-18 SWG SS STRAINER ,BASKET 40 MM DEEP-(3 MM HOLE READY PERFORATED SHEET COMPATIBLE TO THE SHINK),UNIT TO BE SUPPLIED WITH FAUCET, CROSS BRACING 25X25 MM SS SQUARE PIPE /CROSS SUPPORT. LEGS : 30X30X16SWG STAINLESS STEEL SQUARE PIPE WITH ADJ NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S2000X700X850+150 | Item55 | 1 | NOS |
| 56 | 56 | GARBAGE BIN SINTEX DIA 500X700 HT | Item56 | 1 | NOS |
| 57 | 57 | CHOPPING BOARD STERLIZER - TOP- 16SWG SS SINK-16 SWG SS SINK OF SIZE 450X500X400 DEEP WITH 38 MM DIA BSP DRAIN COUPLING AND BALL VALVE , CHOPPING BOARD STACKER -3/8" DIA SS ROD @50MM CLEAR DISTANCE BETWEEN TWO ROD TO STACK /HOLD CHOPPING BOARD OF THICKNESS 1 1/2" (COMPATEBLE TO SINK SIZE) CROSS BRACING -25 MM DIA SS TUBULAR PIPES LEG - 38 MM DIA SS PIPE, CASTOR -04 NOS PLATE FITTED DIA 100MM ALL SWIVEL RUBBERIZED CASTOR, 2 NOS WITH BRAKES FRAME WORK-35X35X3 MM THICK SS ANGLE SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S600X600X700 | Item57 | 1 | NOS |
| 58 | 58 | TWO TIER WALL SHELF : 18 SWG STAINLESS STEEL, 3 SIDES BEEDED UPWARD AND FRONT BEEDED TWICE DOWNWARD. BRACKETS : 4+4 NOS. S.S. BRACKETS EACH SHELF FIXING : FIX TO WALL WITH ANCHOR FASTNERS, SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S2800X350 WIDE | Item58 | 1 | NOS |
| 59 | 59 | WORK TABLE WITH 2 U/S TOP- 16SWG SS TOP WITH SPLASH BACK, UNDER SHELVES-2 NOS 18 SWG SS,ALL SIDE BEEDED TWICE DOWNWARDS,WORK TABLE WITH 2 US-, LEGS : 30X30MM 16 SWG STAINLESS STEEL SQUARE PIPE WITH ADJ.NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE.SPECIAL800X600X850+150 | Item59 | 1 | NOS |
| 60 | 60 | WORK TABLE WITH SINK TOP- 16SWG SS SINK IN TOP SINK-1 NOS 700X500X250 MM DEEP WITH DRAIN COUPLING &SINGLE SWIVEL FAUCET DRAIN TOWARD REAR SIDE SINK WITH STRAINER BASKET, STRAINER BASKET-18 SWG SS STRAINER ,BASKET 40 MM DEEP-(3 MM HOLE READY PERFORATED SHEET COMPATIBLE TO THE SHINK), UNIT TO BE SUPPLIED WITH FAUCET,CROSS BRACING 25X25 MM SS SQUARE PIPE /CROSS SUPPORT.LEGS : 30X30X16SWG STAINLESS STEEL SQUARE PIPE WITH ADJ NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S1500X700X850+150 | Item60 | 1 | NOS |
| 61 | 61 | GARBAGE BIN SINTEX DIA 500X700 HT | Item61 | 1 | NOS |
| 62 | 62 | MEAT MINCER Meat grinder TC 22 E from SIRMAN is made up specially for\ncooking minced meat, fish, fruits and vegetables. Simple and easy\nto use Meat grinder\nAnnounced dimensions of the Meat grinder grater TC 22 E\nFeature: length – 215 mm, depth – 440 mm, height – 520 mm. And\ngrid opening diameter – 4.5 mm. There - a supplemental kit to the\nMeat grinder, which consists of a number of attachments, herewith,\nattachments provides an opportunity significantly increase the\namount of meals, which can be cooked with the applying of this\nperformed Meat grinder. The set also includes - grater, and grater\nenables expand the capabilities of the device and gives a\npossibility to prepare more variety of dishes. Used by the\nmanufacturer of this Meat grinder case material – aluminum, that\nensures the employment of this equipment long-term. Furthermore,\nhopper material – stainless steel. This Meat grinder is very handy,\ncontrol system – electromechanical.MAKE- SIRMAN MODEL - TC12 | Item62 | 1 | NOS |
| 63 | 63 | TWO TIER WALL SHELF : 18 SWG STAINLESS STEEL, 3 SIDES BEEDED UPWARD AND FRONT BEEDED TWICE DOWNWARD. BRACKETS : 4+4 NOS. S.S. BRACKETS EACH SHELF FIXING : FIX TO WALL WITH ANCHOR FASTNERS, SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S2250X350 WIDE | Item63 | 1 | NOS |
| 64 | 64 | CHOPPING BLOCK - TOP 75 MM THICK CHOPPING BLOCK MADE OF FERO NYLON MATERIAL , CHANNEL-25X100X25X16 SWG SS CHANNEL, CORNERS-14 SWG SS CORNER , CROSS BRACING -25X25MM 16 SWG SS SQ PIPE /CROSS SUPPORT, LEG : 30X30X16SWG STAINLESS STEEL SQUARE PIPE WITH ADJ NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S700X700X850 | Item64 | 1 | NOS |
| 65 | 65 | CHOPPING BOARD STERLIZER - TOP- 16SWG SS SINK-16 SWG SS SINK OF SIZE 450X500X400 DEEP WITH 38 MM DIA BSP DRAIN COUPLING AND BALL VALVE , CHOPPING BOARD STACKER -3/8" DIA SS ROD @50MM CLEAR DISTANCE BETWEEN TWO ROD TO STACK /HOLD CHOPPING BOARD OF THICKNESS 1 1/2" (COMPATEBLE TO SINK SIZE) CROSS BRACING -25 MM DIA SS TUBULAR PIPES LEG - 38 MM DIA SS PIPE, CASTOR -04 NOS PLATE FITTED DIA 100MM ALL SWIVEL RUBBERIZED CASTOR, 2 NOS WITH BRAKES FRAME WORK-35X35X3 MM THICK SS ANGLE SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S550X600X700 | Item65 | 1 | NOS |
| 66 | 66 | WET MASALA GRINDER TILTING TYPE CAPACITY -15LTRS WITH SS PANEL ,ELECTRIC -3.3 KW /III PHASETILTING TYPE CAP - 15 Kg | Item66 | 1 | NOS |
| 67 | 67 | PULVERISER POWERFUL CRUSHER WITH DOOR,DIRECTLY COUPLED III PHSE MOTOR ,EXTRA HEAVY CRUSHING CHAMBER AND DOOR CLOSING PROXIMITY SWITCH , SIDES-ALL SIDE OF 20 SWG SS , CONTAINER -18 SWG SS FEEDING CONTAINER WITH LID AND NYLON PUSHER , CONTROL PANE- 18 SWG SS CONTROL PANEL ON /OFF PUSH BUTTON ,CONTACTOR WITH OVERLOAD RELAY, UPRIGHTS- 30X30X16 SWG SS PIPE CONSTRUCTION WITH ADJ NYLON BULLET FEET. CROSS BRACING- 25X25X16 SWG SS PIPE CROSS BRACING ONLY AT REAR ,FRAME WORK- 35X35X3 THICK SS . PROVIDE 1 NOS 1/2 X100MM DEEP J/N CONTAINER ON 16 SWG SS SLIDING ANGLE .5HP | Item67 | 1 | NOS |
| 68 | 68 | GRATING WITH PERFORATED BASKET GRATING-20X 20MM 16 SWG SS SQ PIPE AT 40 MM CTC .MAX LENGTH OF GRATING UNIT IN MULTIPLES OF 600 MM. PERFORATED BASKET-REMOVBLE PERFORATED BASKET 2MM HOLES PRE -PERFORATED SHEET OF 18 SWG SS. MAX LENGTH OF BASKET UNIT IN MULTIPLES OF 900MM WITH PICKUP HANDLE . 25X25X14 SWG SS ANGLE FRAME WITH GROUTING SUPPORT. CIVIL WORKS AND FIXING BY CIVIL CONTRACTOR2400X300 WIDE | Item68 | 1 | NOS |
| 69 | 69 | DIRTY DISH LANDING TABLE TOP- 16 SWG SS SUNK -IN TOP WITH 100 MM HIGH ,TURNED DOWN BY 40MM IN BY 12 MM FROM 3 SIDE WITH 200MM DIA CUTOUT FOR GARBAGE CHUTE ON L.H.S ,OVER HEAD SHELF -18 SWG SS ALL SIDE BIDDED TWICE UP WARDS ,LEGS-30X30MM SS SQ PIPE WITH ADJ NYLON BULLET FEET ,CROSS BRACING-25X25MM SS SQ PIPE ,FRAME WORK-35X35X3MM THICK SS ANGLE .1500X700X850 | Item69 | 1 | NOS |
| 70 | 70 | GARBAGE BIN SINTEXDIA 450x700MM HT | Item70 | 2 | NOS |
| 71 | 71 | DIRTY DROP OFF WINDOW SHELVES -3 NOS 18SWG SS ALL SIDES BIDDED TWICE DOWNWARDS, FRAME WORK-35X35X3 MM THICK SS ANGLE .1000X400X850 | Item71 | 1 | NOS |
| 72 | 72 | ENTRY TABLE TWO SINK TOP- 16SWG SS SINK IN TOP WITH SPLASH BACK .RAW BEDDING AS PER DESIGN TOWARDS THE DISH WASHER MACHINE SIDE . SINK-2 NOS 45X450X250 MM DEEP WITH DRAIN COUPLING LEVER OPERATED BALL VALVE OVERFLOW SYSTEM WITH MIXING FAUCET AND HAND SPRAY UNIT. T&C .SINK WITH STRAINER BASKET , STRAINER BASKET-2 NOS 18 SWG SS STRAINER ,BASKET 40 MM DEEP-(3 MM HOLE READY PERFORATED SHEET COMPATIBLE TO THE SHINK),UNIT TO BE SUPPLIED WITH FAUCET,CROSS BRACING 25X25 MM SS SQUARE PIPE /CROSS SUPPORT. LEGS : 30X30X16SWG STAINLESS STEEL SQUARE PIPE WITH ADJ NYLON BULLET FEET, FRAME WORK-35X35X3 MM THICK SS ANGLE SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S1200X700X850+250 | Item72 | 1 | NOS |
| 73 | 73 | HAND SPRAY UNIT ? 6" (152mm) center deck mounted base faucet\n(008963-40)\n? 49-3/8" (1254mm) high\n? 14" (356mm) overhang\n? 23-3/4" (603mm) clearance\n? 1/2" NPT female eccentric flanged inlets (00AA)\n? 24" (610mm) riser model (000372-40)\n? B-0107 spray valve\n? B-0044-H flexible stainless steel hose\n? B-0109-01 wall bracket\n? EPAct 2005 CompliantT&S-B-2223 | Item73 | 1 | NOS |
| 74 | 74 | GYSER- RACOLD CAP:30 LITRES BY ID | Item74 | 1 | NOS |
| 75 | 75 | DISH WASHER Technical data –\nPass-through dishwashing machine\nFresh water line: Soft cold water 0-3°dH\n3-phase current: 3N PE 400V 50Hz\nRack capacity/h (theoretical) 40 / 24 / 15 racks/h\nProgramme cycle total 90 / 150 / 240 s\nRack dimension 500 x 500 mm (540 x 500)\nEntry height 440 mm\nDimensions (W x Hmin x D) 635( 687) x 1470 x 750(850) mm (with\nhood rod)\nElectrical feeding cable 3-phase current 3N PE 400V 50Hz*\nTotal connected load: 8,9 kW\nmax. rated current: 17,4 A\nLocal fuse protection 20 A\nMachine protection class IP X4\nEquipment Hood start\nMIKE control\nInfrared interface for wireless communication\nDrain pump\nBoiler safety device\nAutomatic self-cleaning when tank is drained Booster pumpMEIKO-UPSTER - H - 500 | Item75 | 1 | NOS |
| 76 | 76 | EXHAUST HOOD FOR DISH WASHER FRAME WORK :1*1/2"X1*1/2"X3 MM FULLY WELDED BOXED S.S. ANGLE FRAME WORK\nBODY :18 SWG POLISHED S.S. FULLY WIELDED BODY CONSTRUCTION,WITH GREASE COLLECTION TRAY AND FILTER FIXTURES.\nGREASE FILTER : INNER BAFFLE SHEETS PERFORATED BELOW TOP COLLAR SOLID SHEETS ON ALL FOUR SIDES AS PER DRAWING,\nFIXING : SUSPENDED FROM CEILING ON M.S. RODS DULY PAINTED ON ANCHOR FASTENERS.\n* THE UNIT TO BE FULLY ARGON ARC WELDED AND SATIN FINISHED BUFFING . SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S 18/8 GRADE 304 QUALITY S.S1000X1000X600 | Item76 | 1 | NOS |
| 77 | 77 | EXIT TABLE TOP 16 SWG SS SUNK-IN TOP WITH SPLASH BACK RAW BEEDING AS PER DESIGNE TOWARDS THE DISH WASHER MACHINE SIDE. ANGLE -5 PAIRS OF 35X35X16 SWG SS ANGLES AT 125MM CLEAR DISTANCE TO HOLD DISH WASHER BASKET . CROSS BRACING -25X25MM SS SQ PIPE, LEGS- 30X30MM SS SQ PIPE WITHADJ NYLON BULLET FEET, FRAME WORK-35X35X3MM THICK SS ANGLE 900X700X850+250 | Item77 | 1 | NOS |
| 78 | 78 | STORAGE RACK- SHELVES 5 NOS. OF 18 SWG S.S. SHEET EQUIDISTANT FROM EACH OTHER,\nDULY STRENGTHENED WITH STAINLESS STEEL STIFFENERS\nFROM BENEATH, UPRIGHTS : 30X30MM STAINLESS STEEL SQUARE PIPES WITH ADJUSTABLE\nNYLON BULLET FEET. SPECIAL INSTRUCTION :- CONSTRUCTION 18/8 GRADE 304 QUALITY S.S.1050X600X1800 | Item78 | 3 | NOS |
| 79 | 79 | POT RACK- OUTER FRAME -INNER CROSS -30MM 16SWG SS ROUND PIPES. SUPPORTS -20MM DIA 16 SWG SS ROUND PIPE INSERTED IN TO THE OUTER FRAME WIDTH WISE AT 75MM CTC UPRIGHTS -38MM DIA SS ROUND PIPE WITH ADJ NYLON BULLET FEET. 1050X600X1800 | Item79 | 1 | NOS |
| 80 | 80 | POT SINK - TOP -16 SWG SS SUNK IN TOP WITH SPLASH BACK ,SINK -OF SIZE 1050X600X250MM DEEP WITH DRAIN COUPLING LEVER OPERATED BALL VALVE HAND SPRAY UNIT T&S AND PERFORATED BASKET . CROSS BRACING-25X25MM SS SQ PIPE LEG-30X30MM SS SQ PIPE WITH ADJ NYLON BULLET FEET FRAME WORK-35X35X3MM THICK SS ANGLE.1200X750X850+250 | Item80 | 1 | NOS |
| 81 | 81 | HAND SPRAT UNIT MAKE - T&S MODEL -B-2223 | Item81 | 1 | NOS |
| 82 | 82 | GEYSER -RACOLD BY ID/ARCHITECT\nCAP:30 LITRES BY ID/CIVIL | Item82 | 1 | NOS |
| 83 | 83 | GRATING WITH PERFORATED BASKET GRATING WITH PERFORATED BASKET GRATING-20X 20MM 16 SWG SS SQ PIPE AT 40 MM CTC .MAX LENGTH OF GRATING UNIT IN MULTIPLES OF 600 MM. PERFORATED BASKET-REMOVBLE PERFORATED BASKET 2MM HOLES PRE -PERFORATED SHEET OF 18 SWG SS. MAX LENGTH OF BASKET UNIT IN MULTIPLES OF 900MM WITH PICKUP HANDLE . 25X25X14 SWG SS ANGLE FRAME WITH GROUTING SUPPORT. CIVIL WORKS AND FIXING BY CIVIL CONTRACTOR4650X300 WIDE | Item83 | 1 | NOS |
| 84 | 84 | DRAIN TROUGH- GRATING-20X20X1.2MM INNER ND OUTER SQ PIPES AT 20 MM DISTANCE , REMOVABLE PERFORATED BASKET-3MM HOLES READY SHEET OF 18SWG SS . DRAIN THROUGH -16 SWG SS CONSTRUCTION 63 MM ROUND PIPE. 2 NOS OF 18 SWG SS HOLDING FASTNER SPOT WELDED , SIZE-50X25 MM AND 8MM DIA HOLE 600X300 WIDE | Item84 | 7 | NOS |
| 85 | 85 | PEST-O- FLASH 24” long 20 watt X 2 tubes incased in G.I. powder\ncoated body.With removable insect tray.RUSSELL-Matrix M Series/ GODREJ/PCI | Item85 | 2 | NOS |
| 86 | 86 | EXHAUST BLOWER (SOUND LESS AXIAL FLOW FAN FOR HOT AIR VENTILLATION, 1.5KW/2 HP CG/ALMONARD MOTOR, Preffered make - CG / ALMONARD)12700 CFM | Item86 | 1 | NOS |
| 87 | 87 | FRESH AIR FAN (SOUND LESS AXIAL FLOW FAN FOR HOT AIR VENTILLATION, 1.5KW/2 HP CG/ALMONARD MOTOR, Preffered make - CG / ALMONARD)10,800 CFM | Item87 | 1 | NOS |
| 88 | 88 | SUPPLY,INSTALLATION,BALANCING,AND COMMISSIONING OF FABRICATED AT SITE GSS SHEET METAL RECTANGULAR/ROUND DUCTING COMPLETE WITH NEOPRENE RUBBER GASKET,ELBOWS,SPLITTER ,DAMPERS,VANS,HANGER,SUPPORT ETC.AS PER APPROVED DRAWING AND SPECIFICATION OF FOLLOWING SHEET THICKNESS COMPLETE AS REQUIRED | |||
| 89 | 88.01 | 0.8 MM THICKNESS(CPWD 16.12.2.2)0.8 MM SHEET | Item88 | 251 | SQ MTR |
| 90 | 88.02 | 0.63MM THICKNESS(CPWD 16.12.2.1)0.63 MM SHEET | Item89 | 53.6 | SQ MTR |
| 91 | 89 | SUPPLY,FIXING,TESTING,COMMISSIONING OF RETURN AIR DIFFUSERS OF POWDER COATED ALUMINIUM WITH ALUMINIUM VOLUM CONTROL DAMPER WITH ANTI SMUDGE RING AND REMOVABLE CORE (CPWD 16.18)400X400 | Item90 | 3 | SQ MTR |
| 92 | 90 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as\nrequired. | |||
| 93 | 90.01 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire | Item91 | 150 | meter |
| 94 | 90.02 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire | Item92 | 100 | meter |
| 95 | 90.03 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire | Item93 | 200 | meter |
| 96 | 91 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. | |||
| 97 | 91.01 | 3 x 2.5 sq. mm | Item94 | 300 | meter |
| 98 | 91.02 | 3 x 4 sq. mm | Item95 | 50 | meter |
| 99 | 92 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc.as required. | |||
| 100 | 92.01 | 3 Module (100mmX75mm) | Item96 | 10 | each |
| 101 | 92.02 | 6 Module (200mmX75mm) | Item97 | 25 | each |
| 102 | 92.03 | 12 Module (200mmX150mm) | Item98 | 10 | each |
| 103 | 93 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. | Item99 | 5 | each |
| 104 | 94 | Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. | Item100 | 10 | each |
| 105 | 95 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. | |||
| 106 | 95.01 | 15/16 A switch | Item101 | 80 | each |
| 107 | 95.02 | 6 pin 15/16 A socket outlet | Item102 | 80 | each |
| 108 | 96 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of\n200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used\nwhere 3 phase outlets are required.) | |||
| 109 | 96.01 | 8 way (4 + 24), Double door | Item103 | 1 | each |
| 110 | 96.02 | 12 way (4 + 36), Double door | Item104 | 1 | each |
| 111 | 97 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal\nspreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A,36KA,FPMCCB | Item105 | 2 | each |
| 112 | 98 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | |||
| 113 | 98.01 | Single pole | Item106 | 40 | each |
| 114 | 98.02 | Triple pole | Item107 | 10 | each |
| 115 | 99 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Up to 35 Sq.mm (clamped with 1mm thick saddle) | Item108 | 200 | mtr |
| 116 | 100 | Supplying and making end termination with brass compression gland , aluminium lugs and gland earthing with nearest earth bus for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required..Make:-Dowells,comet 3½ X 25 sq. mm (28mm) | Item109 | 6 | set |
| 117 | 101 | Supplyof 3.5 C x 25 Sq.mm pvc insulated and pvc round seathed FRLS copper. conductor armoured industrial cable of 1100V grade as per Is 694:1990 .Make:- Polycab/RR cable/universa/KEI | Item110 | 200 | mtr |
| 118 | 102 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (a) For Drainagae Pipe | Item111 | 7.25 | cum |
| 119 | 103 | Dismantling stone slab flooring laid in cement mortar including stacking of\nserviceable material and disposal of unserviceable material within 50 metres lead. | Item112 | 170 | sqm |
| 120 | 104 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) : For Drainagae Pipe | Item113 | 4.55 | cum |
| 121 | 105 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:4 (1 cement : 4 coarse sand) | Item114 | 4.95 | cum |
| 122 | 106 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. wall tiles | Item115 | 121.8 | sqm |
| 123 | 107 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. | Item116 | 2.63 | sqm |
| 124 | 108 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)Kichen Flooring and Hand wash area | Item117 | 177.22 | sqm |
| 125 | 109 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Kichen Flooring and Hand wash area | Item118 | 172 | sqm |
| 126 | 110 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Item119 | 214.8 | sqm |
| 127 | 111 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.: | |||
| 128 | 111.01 | (a) 75 mm diameter | Item120 | 85.2 | mtr |
| 129 | 111.02 | (b) 110 mm diameter | Item121 | 85.2 | mtr |
| 130 | 112 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler | |||
| 131 | 112.01 | (a) 75 mm diameter | Item122 | 10 | nos |
| 132 | 112.02 | (b) 110 mm diameter | Item123 | 10 | nos |
| 133 | 113 | Single pushfit Coupler | |||
| 134 | 113.01 | (a) 75 mm diameter | Item124 | 10 | nos |
| 135 | 113.02 | (b) 110 mm diameter | Item125 | 10 | nos |
| 136 | 114 | Single tee with door | |||
| 137 | 114.01 | (a) 75x75x75 mm | Item126 | 5 | nos |
| 138 | 114.02 | (b) 110x110x110 mm | Item127 | 5 | nos |
| 139 | 115 | Single tee with door | |||
| 140 | 115.01 | (a)75x75x75 mm | Item128 | 20 | nos |
| 141 | 115.02 | (b) 110x110x110 mm | Item129 | 20 | nos |
| 142 | 116 | Bend 87.5° | |||
| 143 | 116.01 | (a) 75 mm diameter | Item130 | 15 | nos |
| 144 | 116.02 | (b) 110 mm diameter | Item131 | 10 | nos |
| 145 | 117 | Shoe (Plain) | |||
| 146 | 117.01 | (a) 75 mm diameter | Item132 | 8 | nos |
| 147 | 117.02 | (b) 110 mm diameter | Item133 | 8 | nos |
| 148 | 118 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall | |||
| 149 | 118.01 | 15 mm nominal outer dia Pipes | Item134 | 30 | mtr |
| 150 | 118.02 | 20 mm nominal outer dia Pipes | Item135 | 30 | mtr |
| 151 | 118.03 | 25 mm nominal outer dia Pipes | Item136 | 10 | mtr |
| 152 | 118.04 | 32 mm nominal outer dia Pipes | Item137 | 10 | mtr |
| 153 | 118.05 | 40 mm nominal outer dia Pipes | Item138 | 10 | mtr |
| 154 | 119 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (a)15 mm nominal outer dia Pipes | Item139 | 20 | mtr |
| 155 | 120 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore | Item140 | 1 | nos |
| 156 | 121 | Providing uPVC Floor Trap / Nahani Trap of following size having not less than 40mm effective water seal, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommendation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, providing and fixing 200 x 200 mm size top tile with central strainer & flat cover / flush strainer, closing the side inlets with plugs if required etc. all complete as per specification and as directed by Engineer-in-Charge.Multifloor trap of 110 x 75 x 75mm size of 3 pc. Mat finish heavy quality | Item141 | 20 | nos |
| 157 | 122 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore | Item142 | 20 | nos |
| 158 | 123 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore | Item143 | 15 | nos |
| 159 | 124 | Providing and fixing C.P. CQT-23309B Sink Mixer with Swinging Casted Round Shape Spout (Table Mounted Model) with 450mm Long Braided Hoses conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore | Item144 | 5 | nos |
| 160 | 125 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. | Item145 | 15 | nos |
| 161 | 126 | Providing and fixing 16 SWG stainless steel floor drain through of required size and specification, with removable perforated basket having 3mm hloes ready sheet of 18 SWG stainless steel. The total system is covered with SS grating (Removable type) made from square pipes of 20*20*1.2 mm @ 75 mm Centre to Centre distance. The drain through will be provided with 65 mm round pipe which will be connected to drain pipes. The measurement will be based on the actual weight of Stainless steel. The required civil works will be paid in the other items. | Item146 | 80 | nos |
| 162 | 127 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work | Item147 | 247.3 | mtr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
