Construction Of Court Building/Residential Quarters ( Excluding Cost Of Cement And Electric Works ) At Udaipurwati ( 01 Work )
Tender Value
58.16 Lakhs
Estimated cost
Bid Submission
03 Jan 2020
0 days left
EMD
1.16 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
UDAIPURWATI → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Court Building/Residential Quarters ( Excluding Cost Of Cement And Electric Works ) At Udaipurwati ( 01 Work )
BOQ
| Name of Work: Construction of Court Building/ Residential Quarters (Excluding cost of Cement & Electric works) at Udaipurwati(1 work) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | PART- \"A\" CIVIL WORK | 0.0001 | hect. | |
| 2 | 1.02 | Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements excluding the cost of centering, shuttering and reinforcement including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints and admixtures in recommended proportions as per IS : 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-20 grade reinforced cement concrete. All work from plinth level up to floor three level.(Excluding cost of cement) | 0.0001 | hect. | |
| 3 | 1.03 | Beams, plinth beams, girders, bressumers, cantilevers, suspended floors, lintels, roofs and staircases including spiral staircases, shelves etc.(Excluding cost of cement) | 141.26 | cum | |
| 4 | 1.04 | Add or deduct for providing richer or leaner mixes respectively. Providing M-25 grade R.C.C. instead of M-20 grade R.C.C.(Excluding cost of cement) | 141.26 | cum | |
| 5 | 1.05 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for: | 0.0001 | hect. | |
| 6 | 1.06 | Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. | 790.18 | Sqm | |
| 7 | 1.07 | Add extra for using steel props and bressings etc. instead of Wooden Member | 0.0001 | hect. | |
| 8 | 1.08 | slab Shuttering | 790.18 | Sqm | |
| 9 | 1.09 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Tremo Mechanically treated bar. | 12713.4 | kg | |
| 10 | 1.1 | Brick masonary in Superstructure up to third storey with bricks of class designation 75 mm in : cement mortar 1:6 ( 1 cement: 6 Coarse sand)(Excluding cost of cement) | 283.25 | Cum | |
| 11 | 1.11 | Half brick masonry in Superstructure up to third story using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm MS bar 2x2x1.00 = 4.0Cement Mortar 1:4 ( 1 cement :4 coarse sand only)(Excluding cost of cement) | 28.74 | Sqm | |
| 12 | 1.12 | Wood work | 0.0001 | hect. | |
| 13 | 1.13 | Providing & fixing ms sheet single leaf door shutters in angle iron frame 35x35x5 mm suitablly diagonally braced with 25x3mm flat ironabove and below lock rail of size 50x5 mm beading extra includingall fittings, as per direction of engg. incharge but excluding coes of chokhats including two coats of anti corrastie red oxide primer panit. MS sheet 18 SWG | 2.28 | Sqm | |
| 14 | 1.14 | Supply & fixing of steel window made out 75x40 mm hollow metal pressed section of 16 gauge thick sheet partly openable and partly fixed panel shutter with 5 mm thick plain glass panes outside openable and wire gauge 14x24 gauge inside openable shutter with M.S. square bar 10 mm side, fixed, portion of window should be glazed by 5 mm thick plain glass of TG welded to M.S. frame and approved make putty with glazing clips inching joints mitred and plug welded with suitable hinges hold fast steel lug and screws with approved oxidized steel handles fittings peg stays etc. complete in all respect including providing 10 mm square MS bars 15 cm. center to cernter and applying priming coat of red oxide paints as per approved drawing by Engineer's incharge | 0.0001 | hect. | |
| 15 | 1.15 | Hollow metal pressed section (75x40 mm) of 16 gauge. | 81.78 | Sqm | |
| 16 | 1.16 | Providing and fixing Square bars or other flat welded to window, ventilators etc. | 613.38 | Kg | |
| 17 | 1.17 | Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25 mm (16Cgauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steelprimer after pre-treatment of the surface as directed by Engineer-in-charge. Profile 'B' | 64.63 | Rmt | |
| 18 | 1.18 | Profile C | 99.39 | Rmt | |
| 19 | 1.19 | Making khurras 450 x 450mm with average minimum thickness 50 mm cement concrete 1:2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40 micron finished with 12 mm cement plaster 1:3 and one coat of neat cement, rounding edges and making and finishing the out let complete.(Excluding cost of cement) | 30 | Each | |
| 20 | 1.2 | Providing batta (gola) 75mm x 75mm in cement concrete 1:2:4) including finished with cement mortar 1:3 as per standard design.(Excluding cost of cement) | 88.41 | Rmt | |
| 21 | 1.21 | Crazy marble stone flooring 20 mm thick marble stone with black or of specified colour topping including filling the gaps with cement marble chips mix in proportion of 4:7 (4-Cement:7-White black or white or black marble chips) size from 1 mm to 4 mm by volume and under layer of 25 mm thick cement concrete [1:2:4, graded stone aggregate 12.5 mm nominal size] rubbing and polishing and cement slurry etc. complete :(Excluding cost of cement) | 0.0001 | hect. | |
| 22 | 1.22 | In ordinary cement | 388.35 | Sqm | |
| 23 | 1.23 | Polished Blue Kota Stone slab in steps, walls, pillars having fine machine cut edges laid on 12mm (Av.) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete (Excluding cost of cement) | 0.0001 | hect. | |
| 24 | 1.24 | 25 mm thick slab area upto 901 to 2000 Sq.Cm. | 16.96 | Sqm | |
| 25 | 1.25 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete (Excluding cost of cement) | 0.0001 | hect. | |
| 26 | 1.26 | For area of each slab up to 2001 to 5000 Sq. Cm : | 0.0001 | hect. | |
| 27 | 1.27 | (A) 25 mm thick slab. | 54.65 | Sqm | |
| 28 | 1.28 | Marble stone flooring table rubbed, 18-20 mm thick over 20 mm (Av.) thick base of CM 1:4 (1-Cement:4-coarse sand) jointing with white cement mortar 1:2 (1-White cement:2-marble dust) with pigment to match the shade of the marble slab including grinding rubbing and polishing complete. (Excluding cost of cement) | 0.0001 | hect. | |
| 29 | 1.29 | Makrana second quality plain. | 0.0001 | hect. | |
| 30 | 1.3 | Upto 801 to 1500 Cm2 Tiles | 40.47 | Sqm | |
| 31 | 1.31 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of: a Green/Black/other granite(Excluding cost of cement) | 0.0001 | hect. | |
| 32 | 1.32 | 1501 to 3600 cm2 | 20.73 | Sqm | |
| 33 | 1.33 | Size above 3600 cm2 | 7.43 | Sqm | |
| 34 | 1.34 | Extra for providing edge moulding to 18 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. | 76.37 | R.mtr | |
| 35 | 1.35 | P&F Double Charged Vitrified Porcelain Polished tiles and approved size(600mmX600mm) as pattern (Naveen/Bell/Johnson/Kajariya)10mm thick on floor skirting and steps etc. laid with tileadmixture (Roof Pidilite of equivalent) including joints to be filled with tile grout to conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete.(Excluding cost of cement) | 537.15 | Sqm | |
| 36 | 1.36 | Providing and fixing Ist quality coloured Glazed Tiles ISI marked [IS:13753] of size 450mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement plaster 1:4 ,1 : cement 4: Fine sand )20 mm thick . Category-I : Kajariya, Jhonson, Orient, Somani make etc.(Excluding cost of cement) | 99.41 | Sqm | |
| 37 | 1.37 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar 1:4 , 1-Cement : 4- fine sand ). (Excluding cost of cement) | 22.35 | Sqm | |
| 38 | 1.38 | FINISHING WORK | 0.0001 | hect. | |
| 39 | 1.39 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 25 mm thick(Excluding cost of cement) | 724.72 | Sqm | |
| 40 | 1.4 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick inner side(Excluding cost of cement) | 1372.04 | Sqm | |
| 41 | 1.41 | 6mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand)(Excluding cost of cement) | 486.41 | Sqm | |
| 42 | 1.42 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete | 2583.17 | Sqm | |
| 43 | 1.43 | Making grooves as per design in plaster 10mm to 20mm wide. | 1087.08 | Rmt | |
| 44 | 1.44 | Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacture specification including primer coat and protecting Coat | 543.54 | Sqm | |
| 45 | 1.45 | Roller Finish av. thickness 400 to 500 microns. | 0.0001 | hect. | |
| 46 | 1.46 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect. | 0.0001 | hect. | |
| 47 | 1.47 | New Work | 181.18 | Sqm | |
| 48 | 1.48 | Wall painting with Oil bound washable of approved brand and manufacture to give an even shade including all scaffolding: New work (Two or more coats ) over and including scrapping and priming coat with cement primer | 2039.63 | Sqm | |
| 49 | 1.49 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. | 405.26 | Sqm | |
| 50 | 1.5 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying Polymen modified cementous slurry mixed with armour cerete of M/s The Structural Water Proofing Company Pvt. Ltd., or Tapecrere of M/s Cico Engineer Service or Hydro Proof of Fosroc consisting of appering : I) first layer of slurry of cement @ 0.488 Kg./sqm mixed with Armourcrete or Tapecrete @ 0.253 Kg/sqm. This layer will be allowed to air cure for 4 hours.II) Second layer of slurry of cement @ .242 Kg./sqm mixed with Armourcrete or Tapecrete @ 0.126 Kg./Sam. This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints corners, junction with polymer mixed slurry. Note- Rendering /plastering as protective layer, if require will be paid separately. | 0.0001 | hect. | |
| 51 | 1.51 | II) Second layer of slurry of cement @ .242 Kg./sqm mixed with Armourcrete or Tapecrete @ 0.126 Kg./Sam. This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints corners, junction with polymer mixed slurry. Note- Rendering /plastering as protective layer, if require will be paid separately.(Excluding cost of cement) | 74.47 | p.sqm | |
| 52 | 1.52 | Finishing with neat cement slurry(Excluding cost of cement) | 74.47 | Sqm | |
| 53 | 1.53 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1:2:4 light concrete , using brick bats complete leveling and dressing the surface by 50 mm thick cement concrete 1:2:4 as per specification(Excluding cost of cement) | 10.79 | Cum | |
| 54 | 1.54 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt manufactured by Bitumat Co., Ltd., Soprema, General membranes or Tamko consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Ltr./Sq.Mt. by the same membrane manufacture of density at 250 C, 0.87-0.89 Kg,./Ltr. and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chamical parameters of the membrane shall be as under Joint strength in longitudinal and transverse direction at 230 as 650/450N/5Cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 1500C. Cold flexibility shall be up to - 20C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane.3mm thick. | 388.35 | Sqm | |
| 55 | 1.55 | Extra for covering top membrane with Geotextile, 120gsm non woven ,100% polyster of Thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures | 388.35 | Sqm | |
| 56 | 1.56 | Grading roof water proofing treatment with With Cement concrete 1:2:4 (1-Cement : 2 -Coarse sand : 4-Graded stone aggregate 20 mm nominal size)(Excluding cost of cement) | 38.83 | Cum | |
| 57 | 1.57 | Providing and fixing factory made of uPVC Extruded section having an overall dimension as below (tolerance+/-1mm) with wall thickness 2.0mm+/-0.2mm,corners of the door frame to be mitred and welded of plastic ,galvanized brackets and stain less steel screws.The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19x19mm and 1mm+/-0.1mm wall thickness and 3 nos.stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge.\n\n\n\n | 0.0001 | hect. | |
| 58 | 1.58 | Extruded section profile size 42x50 mm | 14.18 | ,mtr | |
| 59 | 1.59 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : | 0.0001 | hect. | |
| 60 | 1.6 | 20 mm. | 112.2 | R.mtr | |
| 61 | 1.61 | Providing and fixing fully paneled double leaf shutter for doors as per approved design and drawing with approved ordinary C.P./oxidized steel fittings as per Annexure – A’ and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mmx12mm on both faces complete : | 0.0001 | hect. | |
| 62 | 1.62 | Wire gauge 24 gauge 14 mesh of IS designation 85 gauge wire of dia 0.56mm panels | 0.0001 | hect. | |
| 63 | 1.63 | 35 mm thick | 0.0001 | hect. | |
| 64 | 1.64 | Nigeria teak wood grade - I | 10.04 | sqm | |
| 65 | 1.65 | Providing and Fixing hydraulic door closure ISI marked. | 10 | Per Each | |
| 66 | 1.66 | Providing and fixing glazing in aluminium door, window, vintilator shutters and partitions etc. with PVS/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost. of aluminium snap beading shall be paid in basic item.) | 0.0001 | hect. | |
| 67 | 1.67 | with tinted glass panes of 5.0mm thickness (weight not less than 13.75 Kg/ Sqm) | 15.06 | Sqm | |
| 68 | 1.68 | Providing & laying Chequerred terrazzo tiles of approved make30 mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28 mm thick bed of C.M. 1:4 (Excluding cost of cement) | 0.0001 | hect. | |
| 69 | 1.69 | Dark shade using ordinary cement. | 19.52 | Sqm | |
| 70 | 1.7 | Providing and fixing external grade board water proof/resistant solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides fixed with 1 mm lamination sheet both side shade as per direction of Engineer Incharge and beading of 37 x 10 on all exposed four side with approved stainless steel fittings 4 Nos of Hinges, one aldrop of 300 mm , 2 nos tower bolt rear side , back and front stopper , 2 Nos handle 100 mm of approved quality as approved by Engineer Incharge with complete 37 mm thick as per the specification and direction of Engineer Incharge. | 62.96 | Sqm | |
| 71 | 1.71 | Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge. | 28.3 | Sqm | |
| 72 | 1.72 | PART B - (SANITARY WORK ) | 0.0001 | hect. | |
| 73 | 1.73 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. (Excluding cost of cement) | 1 | Each | |
| 74 | 1.74 | P & F European type white glazed vitreous china Ist quality Double symphonic W.C. (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor.(Excluding cost of cement) | 4 | Each | |
| 75 | 1.75 | P & F water closet Seat Covers with brass hinges complete : Solid PVC (ISI marked) grade-I coloured for EWC. | 4 | Each | |
| 76 | 1.76 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 590x375x390 mm(Excluding cost of cement) | 5 | Each | |
| 77 | 1.77 | 1.17 P & F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. Makrana II quality marble having light spots.(Excluding cost of cement) | 5 | Each | |
| 78 | 1.78 | P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS : 7231 | 5 | Each | |
| 79 | 1.79 | P & F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make.For 2 Urinals | 5 | Each | |
| 80 | 1.8 | P & F C.P. brass Urinal Spreader for stall urinal of approved make. | 5 | Each | |
| 81 | 1.81 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 550 mm x 400 mm dia for counter top. | 6 | Each | |
| 82 | 1.82 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick asbestos cement base fixed to wooden screws & washers. | 4 | Each | |
| 83 | 1.83 | P&F towel rail or ring of approved quality /make: C.P. brass towel ring revolving type | 4 | Each | |
| 84 | 1.84 | P & F Grating of approved quality/make: Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make | 10 | Each | |
| 85 | 1.85 | P & F Liquid Soap Container with brackets complete of approved make:C.P. brass heavy & superior quality | 4 | Each | |
| 86 | 1.86 | P & F Toilet Paper Holder with rod of approved quality/make: C.P. brass | 4 | Each | |
| 87 | 1.87 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. | 4 | Each | |
| 88 | 1.88 | P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors : | 0.0001 | hect. | |
| 89 | 1.89 | Exposed on wall | 0.0001 | hect. | |
| 90 | 1.9 | 15 mm dia nominal bore. | 50 | Per Mtr. | |
| 91 | 1.91 | 25 mm dia nominal bore. Class B | 30 | Per Mtr. | |
| 92 | 1.92 | P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239 Mark) & M.S. clamps including cutting and making good the walls and floors :Concealed pipe in Wall incl. with anticorrosive bitumen paint | 0.0001 | hect. | |
| 93 | 1.93 | 15 mm dia nominal bore. | 50 | Per Mtr. | |
| 94 | 1.94 | P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc. | 0.0001 | hect. | |
| 95 | 1.95 | 50mm dia nominal bore. | 60 | Per Mtr. | |
| 96 | 1.96 | ProvidingandfixingSuperiorqualityCPBrassfittingsofapprovedmakeasperdirectionofEngineer-in-charge | 0.0001 | hect. | |
| 97 | 1.97 | Bib Cock with long thread 15 mm nominal size | 8 | Each | |
| 98 | 1.98 | 2.12 P & F Inlet Connection (Angle Valves) Superior | 0.0001 | hect. | |
| 99 | 1.99 | quality, of approved make, for Wash basin, do with 37 cm long thread and nut | 12 | Each | |
| 100 | 2 | P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C Ball complete do wt 1200 gm ,40mm | 3 | Each | |
| 101 | 2.01 | P & F Stop cock (IS:8931 Mark) superior quality | 0.0001 | hect. | |
| 102 | 2.02 | & of approved make : | 0.0001 | hect. | |
| 103 | 2.03 | -do- Concealed Stop Cock 15 mm. | 12 | Each | |
| 104 | 2.04 | Door cap 75/110 mm | 0.0001 | hect. | |
| 105 | 2.05 | 75 mm | 10 | Each | |
| 106 | 2.06 | 110 mm | 10 | Each | |
| 107 | 2.07 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : | 0.0001 | hect. | |
| 108 | 2.08 | Gun-metal 25 mm nominal bore. | 4 | Each | |
| 109 | 2.09 | P & F Gun-metal Non-return Valve or Check Valve (IS :Make) of approved make, superior quality: | 0.0001 | hect. | |
| 110 | 2.1 | 25 mm nominal bore. | 5 | Each | |
| 111 | 2.11 | 25 mm nominal bore.Horizontal | 5 | Each | |
| 112 | 2.12 | 50 mm nominal bore. | 5 | Each | |
| 113 | 2.13 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: | 0.0001 | hect. | |
| 114 | 2.14 | 1000 litre capacity | 3 | Each | |
| 115 | 2.15 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 75 mm dia | 100 | R.mtr | |
| 116 | 2.16 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. 110 mm dia | 100 | R.mtr | |
| 117 | 2.17 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant | 140 | R.mtr | |
| 118 | 2.18 | 110mm dia | 0.0001 | hect. | |
| 119 | 2.19 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make. | 0.0001 | hect. | |
| 120 | 2.2 | Coupler (socket) | 0.0001 | hect. | |
| 121 | 2.21 | 75mm dia | 10 | Each | |
| 122 | 2.22 | Coupler (socket) | 0.0001 | hect. | |
| 123 | 2.23 | 110mm dia | 10 | Each | |
| 124 | 2.24 | Bend 45 | 0.0001 | hect. | |
| 125 | 2.25 | 110 mm dia | 10 | Each | |
| 126 | 2.26 | Bend 87 .5 | 0.0001 | hect. | |
| 127 | 2.27 | 75mm dia | 10 | Each | |
| 128 | 2.28 | 110 mm dia | 20 | Each | |
| 129 | 2.29 | Vent Cowel | 0.0001 | hect. | |
| 130 | 2.3 | 75mm dia | 4 | Each | |
| 131 | 2.31 | 110 mm dia | 4 | Each | |
| 132 | 2.32 | WC Connector with Ring 110 mm dia | 4 | Each | |
| 133 | 2.33 | Multi floor trap (110 mm dia) | 10 | Each | |
| 134 | 2.34 | Providing and fixing unplasticized Poly Vinyl Chloride(UPVC) SWR pipes type `B' for sciland waste dischare\nsystem (IS : 13592: 1992 marked) of approved quality/make | 0.0001 | hect. | |
| 135 | 2.35 | Single `Y' | 0.0001 | hect. | |
| 136 | 2.36 | 75mm | 10 | Each | |
| 137 | 2.37 | 110mm | 10 | Each | |
| 138 | 2.38 | Single Tee | 0.0001 | hect. | |
| 139 | 2.39 | 75mm | 10 | Each | |
| 140 | 2.4 | 110mm | 10 | Each | |
| 141 | 2.41 | Door Bend 87.5Dg. | 20 | Each | |
| 142 | 2.42 | Single Tee with Door | 20 | Each | |
| 143 | 2.43 | P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.(Excluding cost of cement) | 0.0001 | hect. | |
| 144 | 2.44 | Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm.(Excluding cost of cement) | 5 | Each | |
| 145 | 2.45 | Pipe clip(110 mm dia) | 50 | Each | |
| 146 | 2.46 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. Depth up to 0.5 M(Excluding cost of cement) | 4 | Each | |
| 147 | 2.47 | Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design : Depth up to 1.5 M(Excluding cost of cement) | 4 | Each | |
| 148 | 2.48 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame.(Excluding cost of cement) | 10 | Each | |
| 149 | 2.49 | Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. : Size 300 Cm. dia outside & 300 Cm. depth.(Excluding cost of cement) | 1 | Each | |
| 150 | 2.5 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400 x140x150 cm.(for 50 users)(Excluding cost of cement) | 1 | Each |
AI Tender Summary
Tender Timeline
Dec 28, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedJan 03, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 06, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender