Out Sourcing And Maintenance Of Stp (Map) At Vsn Nagpur, GE (AF) Nagpur-Maharashtra

Out Sourcing And Maintenance Of Stp ( Map ) At Vsn Nagpur -1 1. Outsourcing And Maintenance Of Mbbr Based Sewage Treatment Plant Capacity 250 Kld At Map Area Vsn , For Operatng The Pump Set , Blowers And Filtrers, Treated Water Pump, And All Connected Equipments To Main Tain The Required Parameters Of Treated Effluent In All Respects , For Each Shift Of 08 Hrs Two Shifts By Skilled Personal 01 Nos In Each Shifts Of 08 Hrs For Three Shifts A Day ( First Shift I.E 06 Hrs Ot 1400 Hrs ) , Second Shift 1400 Hrs To 2200 Hrs ) Third Shift 2200 Hrs To 0600 Hrs ) Including Sunday And Holidays Making The Arrangement For Reliver The Operator Shall Properly Record The Log Book And Cleaning Of Installlatin Including Toilet Is The Responsibility Of Contractor All As Specified And As Directed. 2 ( A ) Log Book, Log Sheet & Chemical Consumption Records Shall Be In Contractor Scope & Testing Of Water ( With Parameters Like. Ph, Tds, Cod, Bod, Total Coliform & Free Residual Chlorine ) Through Reputed / Nabl Lab And The Same Shall Be Produced & Recorded By Department & Needs To Be Approved By Engineer-In-Charge On Quarterly Basis. ( Contractor Will Provide Chlorine Testing Kit And Ot Solution For Testing Of Water And Cost Of The Same Shall Be Deemed To Be Included In The Quoted Rate Of The Respective Item. 3 ( B ) Contractor Shall Be Responsible For Security For The Premises On Round The Clock Basis If Any Losses / Damages Occured At The Primises The Same Shall Be Born By Conmtractor. 4 ( C ) Contractor Shall Be Responsible For Providing All The Safety Personal Protective Eqipments To Their Manpower Deployed For Safe Operation, Prices For Safety Ppes Like Gas Mask, Helmet, Apron, Handglobes, Electrical Safety Equipments & Safety Shoes Shall Be Included In Contractor Scope. 5 ( D ) The Rate Quoted Shall Be Deemed To Include The Cost Of Material & Labour For The Following:- 6 ( I ) Routine Maintence Of Pump Sets Including Motor As Per Manufacturers Instruction ( Item No. 01 Contd / / …. ) 7 ( Ii ) Comprehensive Repair And Maintenance Of One Number Main Control Panel Like Replacement Of Unserviceable Wiring And Push Button, Strat Button, Amp Mtr, Volt Mtr Indication Button And Compressor Starter Switch Etc, The Cost Shall Be Included Total Overhaulling Of Motor Control Panel And Make It Fully Serviceable. Routine Maintenance Of Lt Panels Inside Of Buildings With Motor Starter For Pump Sets. 8 ( Iii ) Checking Of Proper Functioning Of Star Delta Starter For Pump Sets And Replacements Of Minor Spare Parts. 9 ( Iv ) Checking The Foot Valve Of Pump Sets And Rectify The Defects 10 ( V ) Routine Maintenence Of Dosing System. 11 ( Vi ) Replacement Of Foot Valve Jeep Leather And Repair To Any Leakage In Suction Pipe Line And Header Pipe Line In Pump House Premises. 12 ( Vii ) Maintenance And Operation Of All Filter Plants Including All Valves Including Repair And Gland Packing. 13 ( Viii ) The Minimum Qualification Of The Staff To Be Employed By The Contractor Will Have Minimum Iti Passed For Skilled And 10Th Passed For Semiskilled. 14 ( Ix ) Maintaining The Daily Running Record Of Pump And Entering In Log Sheet Register ( Log Sheet To Be Provided By The Contractor As Directed By Engineer-In-Charge. 15 ( X ) In Case Of Any Staff Is Found Absent From The Duty, No Payment Will Be Made For That Shift And Penalty Of Double The Quoted Rate Wil Be Made. 16 ( Xi ) Any Damage To Machinery / Equipment Due To Wrong Handling, Will Be The Responsibility Of The Contractor And The Damage Shall Be Completely Rectified To The Entire Satisfaction Of Engineer-In-Charge 17 ( Xii ) Attendence Register For Personnel Employed By The Contractor To Be Maintained And Produced To Eic At The Time Of Payment ( Rar ) 18 ( Xiii ) To Provide Additional Manpower For Rectification Of Major Problems 19 ( Xiv ) All Types Of T&P Required For Day To Day Requirements Shall Be Provide By The Contractor 20 ( Xv ) All Types Of Transportation If Required For Handling Materials / Equipts Etc Shall Be Provided By The Contractor 21 ( Xvi ) All Types Of Fire Equipts Provided In All The Installations Shall Be Maintained And Operated Properly 22 ( Xvii ) All Electrical Fittings And Fixtures To Be Maintained And Contractor Shall Be Responsible For Any Damage 23 ( Xviii ) All Types Of Water Tanks Including Flushing Tanks Shall Be Maintained 24 ( Xix ) All Installations To Be Kept Neat And Clean All The Time And Security Checks To Be Carried Out Daily 25 ( Xx ) Uniform To Be Maintained For Employees For Workingin O&M Of Stp 26 ( Xxiv ) All Safety Equipments Such As Breathing Apparatus, Safety Belts, Air Hose Respiratory, Portable Lighting Equipments, Driversuit Etc Working Hazardous Condition To Be Provided By Contractor ( Item No. 01 Contd / / …. ) 27 ( Xxii ) First Aid Box With Basic Medicines To Be Kept In Main Installation By The Contractor As Directed 28 ( Xxiii ) Misuse Of Electricity And Water To Be Penalised And Effective Recovery Will Be Made By The Department 29 2. Testing Of Treated Water Sample Collected From Vayusena Nagar Nagpur And Testing Report Required From Through Reputed Laboratory As Per Bis -10500:2012 For Sewage Treated Water Are Required Folowing Test; Followings Parameters For Waste Treated Water Should Be Maintained By The Contractor Of Stp Plant: - Nph 6.5-8.5, Tds; Bod Mg / L- <10; Cod Mg / L <150; Tss ( Total Suspended Solids ) Mg / L <10; Coli Form Count - Counts / 100Ml; Residual Chlorine - >1.0 30 3. Supply Of Trichloroisocyanuric Acid ( 90% ) ( C3ci3n303 ) Chlorine Granuals ( 90% ) Size 5-8 Mesh, Appearance : White Granuals, Effective Chlorine : 90%, Ph : 2.7 To 3.3 Nnote: - Mixing & Dosing Will Be In Contractor Scope As Directed By Enfr-In-Charge. 31 4. Sewage Transfer Pump ( Horizantal Type ) :- M&L For Opening Pump Set Split Case Centrifugal Of Capacity 10.5 M3 / Hr With Head Of 12 Mwc Kirloskar Make From Motor Coupling After Isolating The Electric And Earth Lead Connections Opening The Pump Set For Repair / Overhauling & Proper Alignment Of Shaft Etc Including Replacing The Items With New Items Given Vide Item Below, Reassemblying The Pumpset Greasing Connecting, Testing And Commissioning Complete Including Necessary Lath Works All As Specified At 250 Kld Stp At Af Vayusena Nagar. Nnote: - Major Spares Parts Will Be Measured & Paid Seperatly As Supply Only. 32 5. Supply Only Spare Parts For Pump Set For Fixing Against Item No. 4 As Follows:- 33 A ) Supply Only Pump Shaft Sleeve Made Out Of Gun Metal 34 B ) Supply Only Key For Main Shaft / Impeller 35 C ) Supply Only Motor Pump Coupling Complete With Nut, Bolts Etc 36 D ) Supply Only Pump Set Bearing Housing 37 E ) Supply Only Pump Shaft 38 F ) Supply Only Ball / Roller Bearing Complete 39 G ) Supply Only Impeller 40 6. Treated Water Transfer Pump Set :- M&L For Opening Pump Set Split Case Centrifugal Of Capacity 7.5 Hp Kirloskar Make From Motor Coupling After Isolating The Electric And Earth Lead Connections Opening The Pump Set For Repair / Overhauling & Proper Alignment Of Shaft Etc Including Replacing The Items With New Items Given Vide Item Below, Reassemblying The Pumpset Greasing Connecting, Testing And Commissioning Complete Including Necessary Lath Works All As Specified At 250 Kld Stp At Af Vayusena Nagar. Nnote: - Major Spares Parts Will Be Measured & Paid Seperatly As Supply Only. 41 7. Supply Only Spare Parts For Treated Water Transfer Pump Set As Follows:- 42 A ) Supply Only Pump Shaft Sleeve Made Out Of Gun Metal 43 B ) Supply Only Key For Main Shaft / Impeller 44 C ) Supply Only Check Nut For Pump Set Shaft 45 D ) Supply Only Motor Pump Coupling Complete With Nut, Bolts Etc 46 E ) Supply Only Pump Set Bearing Housing 47 F ) Supply Only Pump Shaft 48 G ) Supply Ball / Roller Bearing Complete 49 H ) Supply Only Impeller 50 8. Filter Feed Pump ( Horizantal Centrifugal Mono Block Type ) : - M&L For Opening Pump Set Monoblock Type Of Capacity 11.4 Cum / Hr @ 26 Mtr Head 2.2 Kw 2900 Rpm Kirloskar Make Coupling After Isolating The Electric And Earth Lead Connections Opening The Pump Set For Repair / Overhauling & Proper Alignment Of Shaft Etc Including Replacing The Items With New Items Given Vide Item Below, Reassemblying The Pumpset Greasing Connecting, Testing And Commissioning Complete Including Necessary Lath Works All As Specified At 250 Kld Stp At Af Vayusena Nagar. Nnote: - Major Spares Parts Will Be Measured & Paid Seperatly As Supply Only 51 9. Supply Only Spare Parts For Feed Pump As Follows:- 52 ( A ) Supply Only Pump Bearing 53 ( B ) Supply Only Pump Shaft Sleev, Gland Packng & Oil Seal 54 ( C ) Supply Only Pump Shaft 55 ( D ) Supply Only Impeller 56 10. Air Blower For Stp :- M&L For Opening Air Blower Set Twin Lobe Type Of Capacity 140 Cum / Hr With Head Of 0.65 M Make Everest Rpm 1367 , Blower & Motor Coupling After Isolating The Electric And Earth Lead Connections Opening The Pump Set For Repair / Overhauling & Proper Alignment Of Shaft Etc Including Replacing The Items With New Items Given Below, Reassemblying The Pumpset Greasing Connecting, Testing And Commissioning Complete Including Necessary Lath Works All As Specified At 250 Kld Stp At Af Vayusena Nagar Note :- Major Spares Parts Will Be Measured & Paid Seperatly.As Supply Only 57 11. Supply Only Spare Parts For Air Blower Follows:- 58 A ) Supply Only Blower Bearing Of Size 22210 Make Skf 59 B ) Supply Only Blower V Belt Of Size B1465 Lp / B56 60 C ) Supply Only Blower Pulley Of Size Od-187.5 Mm / Id-62.5 Mm 61 D ) Supply Only Blower Oil Seal & Packing 62 E ) Supply Only Blower Suction Filter 63 F ) Supply And Fill Blower Oil No. 90 Servo / Shell 64 12. Taking Down Electric Motor 7.5Kw / 10 Hp 415 Volt Coupled To Pump After Disconnecting The Electrical Connection, And Earth Connections From Its Foundation And Transportation To Work Shop Opening Carefully The Rotor And Stator Winding And Cleaning And Removing All Dust And Dirt Carefully , Warnishing The Stator To Enhance The Insulation Level, Baking, Drying Complete, Greasing Reassemblying The Motor To Reinstallation On Foundation, Reconnecting Back The Cable And Earth Connections Etc Complete In All Respect And Starting The Pump All As Directed. 65 13. Taking Down Electric Motor 2.8 Kw / 415 Volt Coupled To Pump After Disconnecting The Electrical Connection, And Earth Connections From Its Foundation And Transportation To Work Shop Opening Carefully The Rotor And Stator Winding And Cleaning And Removing All Dust And Dirt Carefully , Warnishing The Stator To Enhance The Insulation Level, Baking, Drying Complete, Greasing Reassemblying The Motor To Reinstallation On Foundation, Reconnecting Back The Cable And Earth Connections Etc Complete In All Respect And Starting The Pump All As Directed. 66 14. Taking Down Electric Motor 1.75 Kw / 415 Volt Coupled To Pump After Disconnecting The Electrical Connection, And Earth Connections From Its Foundation And Transportation To Work Shop Opening Carefully The Rotor And Stator Winding And Cleaning And Removing All Dust And Dirt Carefully , Warnishing The Stator To Enhance The Insulation Level, Baking, Drying Complete, Greasing Reassemblying The Motor To Reinstallation On Foundation, Reconnecting Back The Cable And Earth Connections Etc Complete In All Respect And Starting The Pump All As Directed. 67 15. M & L For Rewinding Of Pump Motor 415 Volt 3 Phase After Disconnecting Electric Cable And Eath Lead, Suction And Delivery Pipes, Shifting To Work Shop, Dismantling The Motor Assembly And Removing The Burnt Out Copper Winding Of Stator And Cleaning The Stator Slots And Core Assembly, Rewinding To Stator With Suitable Gauge Super Enamelled Copper Wire With Insulating Papers And Insulation Cloths, Varnishing The Winding And Baking Heating For Achieving The Required Insulation Resistance, Re-Assembling The Motor And Testing Complete, Incl Transporting Back To Site And Fixing Motor To Its Original Place, Reconnecting Electric Cable And Earth Leads Etc Testing And Commissioning Complete In All Respect All As Specified And As Directed By Engr-In-Charge For The Following Capacity: - 68 ( A ) 7.5 Kw / 10 Hp 69 ( B ) Up To3 Kw 70 16. Material And Labour For Cleaning Of Equalisation Sewage Tank For 250 Kld Stp By Cleaning Entire Internal Surface By Removing Dirt, Sludge Etc With Wire Brush By Applying Bleaching Power And Fresh Water And Clean Entire Surface Repeatedly With Fresh Water And Draining Out Soiled Water Including Using Pressure Jet Pump And Suction Pump Suitable Capacity Surface Complete In All In As Specified And Directed.Using Acid And Other Suitable Methods Before Filling As Required At Site All As Specified And Directed By Engineer-In-Charge For The Following Note -Quoted Rates Shall Include For Using Fresh Water For Cleaning & Sludge Cutter Pump For Removing Of Sludge From Tank And De-Watering Will Be The Contractor Unser His Own Arrangement. 71 17 Material And Labour For Cleaning Of Mbbr Reactor Tank / Tube Settler Tank / Sewage Tank For 250 Kld Stp By Cleaning Entire Internal Surface By Removing Dirt, Sludge Etc With Wire Brush By Applying Bleaching Power And Fresh Water And Clean Entire Surface Repeatedly With Fresh Water And Draining Out Soiled Water Including Using Pressure Jet Pump And Suction Pumpsuitable Capacity Complete .Using Acid And Other Suitable Methods Before Filling As Required At Site . Note -Quoted Rates Shall Include For Using Fresh Water For Cleaning & Sludge Cutter Pump For Removing Of Sludge From Tank And De-Watering Will Be The Contractor Under His Own Scope Arrangement. 72 18. Material And Labour For Cleaning Of Hypo Solution Tank / Treated Water Tank / Sewage Tank For 250 Kld Stp By Cleaning Entire Internal Surface By Removing Dirt, Sludge Etc With Wire Brush By Applying Bleaching Power And Fresh Water And Clean Entire Surface Repeatedly With Fresh Water And Draining Out Soiled Water Including Using Pressure Jet Pump And Suction Pump Capacity Of Pool Surface Complete In All In As Specified And Directed.Using Acid And Other Suitable Methods Before Filling As Required At Site All As Specified And Directed By Engineer-In-Charge For The Following Note -Quoted Rates Shall Include For Using Fresh Water For Cleaning & Sludge Cutter Pump For Removing Of Sludge From Tank And De-Watering Will Be Contractor Scope Under His Own Arrangement. 73 19. Material And Labour For Cleaning Of Sludge Dryer Tank / For 250 Kld Stp By Cleaning Entire Internal Surface By Removing Dirt, Sludge Etc With Fresh Water And Clean Entire Surface Repeatedly With Fresh Water And Draining Out Soiled Waste Material Including Using Suitable Equipment / Tools Surface Complete In All In As Specified And Directed.Using Acid All As Specified And Directed By Engineer-In-Charge For The Following 74 20. Taking Out Old U / S And Supply And Fix Ci Body Nrv Valve Conforming To Is Of Size 50 Dia Complete With Nuts, Bolts, Rubber Gaskets Etc Including , Testing , Isi Marked , Including Jointing Material Such As Rubber Gasket, Bolts, Nuts, Etc Suitable For Size 50 Mm All As Specified And As Directed By Eng-In-Charge Make: Kirloskar Or Venus All As Specified.. 75 21. Taking Out Unserviceable & Supply And Fix Ci Body Foot Valve Conforming To Is Of Size 80 Dia Complete With Nuts, Bolts, Rubber Gaskets Etc Including , Testing All As Specified. 76 22. Taking Out Unserviceable Butter Fly Valve Of Size 40 Mm Bore And Supply And Fix New Butter Fly Valve Wafer Type In Ci Body With Integrally Moulded Liner Of Nitrile Or Epdm Stainless Steel Disc & Stem, Liver Operated As Per Is 13095 In Pn 1.0 In Including Jointing Material Such As Rubber Gasket, Bolts, Nuts, Etc Direct Integrally All As Specified And As Directed By Eng-In-Charge Make: Kirloskar Or Kartar , / Isi 77 23. Taking Out Unserviceable Butter Fly Valve Of Size 50 Mm Bore And Supply And Fix New Butter Fly Valve Wafer Type In Ci Body With Integrally Moulded Liner Of Nitrile Or Epdm Stainless Steel Disc & Stem, Liver Operated As Per Is 13095 In Pn 1.0 In Including Jointing Material Such As Rubber Gasket, Bolts, Nuts, Etc Direct Integrally All As Specified And As Directed By Eng-In-Charge Make: Kirloskar Or Kartar / Isi , / Zoloto 78 24. Taking Out Unserviceable Butter Fly Valve Of Size 65 Mm Bore And Supply And Fix New Butter Fly Valve Wafer Type In Ci Body With Integrally Moulded Liner Of Nitrile Or Epdm Stainless Steel Disc & Stem, Liver Operated As Per Is 13095 In Pn 1.0 In Including Jointing Material Such As Rubber Gasket, Bolts, Nuts, Etc Direct Integrally All As Specified And As Directed By Eng-In-Charge Make: Kirloskar Or Kartar , / Isi / Zoloto 79 25. Taking Out Unserviceable Butter Fly Valve Of Size 80 Mm Bore And Supply And Fix New Butter Fly Valve Wafer Type In Ci Body With Integrally Moulded Liner Of Nitrile Or Epdm Stainless Steel Disc & Stem, Liver Operated As Per Is 13095 In Pn 1.0 In Including Jointing Material Such As Rubber Gasket, Bolts, Nuts, Etc Direct Integrally All As Specified And As Directed By Eng-In-Charge Make: Kirloskar Or Kartar / Isi / Zoloto , 80 26. Taking Out Unserviceable Ball Valve & Supply And Fix Ball Valve 1 / 2 Size In Ci Body Including All Accessories And As Directed By Eng-In-Charge Make: Kirloskar Or Kartar / Isi , / Zoloto 81 27. Supply And Laying Only, Lt Ug Xlpe Insulated 1100 Volt Grade Heavy Duty Cable Multi Stranded Aluminium Conductor Served With An Inner Sheathing Of Pvc Tape Armoured With Galvanised Steel Strip Wire Of Tape And Connecting Up To The Electrical System With Suitable Size Of Aluminium Lugs Of Size 6 Sqmm 3 Core All As Specified And As Directed. 82 28. Supply And Laying Only, Lt Ug Xlpe Insulated 1100 Volt Grade Heavy Duty Cable Multi Stranded Aluminium Conductor Served With An Inner Sheathing Of Pvc Tape Armoured With Galvanised Steel Strip Wire Of Tape And Connecting Up To The Electrical System With Suitable Size Of Aluminium Lugs Of Size 2.5 Sqmm 3 Core All As Specified And As Directed. 83 29. Replacements Of Unserviceable Nut Bolts Of Any Sizes 12X55 Mm, 16X55 Mm, 12X110mm, 16X110 Mm 84 30. Taking Out Unservicable & S & F Mccb 3 Pole 63Amps C Series, Breaking Capacity 35 Ka, C Curve 415 Volts, 50 Hz Including Necessary Incoming And Out Going Electric Connection With Suitable Size Of Copper Lugs Etc. Make : Legrand / Havell Hager, L&T. 85 31. Taking Out Unserviceable Filter Media & Refilling Or Replacement Of Filter Media ( Pabble ) Suitbale Size For 250 Kld Stp Dual Media Filter All As Specified And Directed. 86 32. Replacement Of Filter Media ( Gravel ) Suitbale Size For 250 Kld Stp Dual Media Filte All As Specified And Directed. 87 33. Replacement Of Filter Media ( Coarse Sand Suitbale Size For 250 Kld Stp Dual Media Filte All As Specified And Directed. 88 34. Replacement Of Filter Media ( Fine Sand ) Suitbale Size For 250 Kld Stp Dual Media Filter All As Specified And Directed. 89 35. Replacement Of Filter Media ( Antheracite Suitbale Size For 250 Kld Stp Dmf. All As Specified And Directed. 90 36. Replacement Of Carbon For Acf ( Activated Carbon Filter ) Media Suitbale Size For 250 Kld Stp All As Specified And Directed. 91 37. Replacements Of Unserviceable Media For Mbbr Type Of Media Floating Pp, Cylindrical Shaped, Specific Gravity 0-90 -0-95 Gms / Cm3, Colour Black For 250 Kld Note: Sample Available At Age E / M Office 92 38. Replacements Of Unserviceable Media For Settler Tank ( Tube Deck Media ) Type Pvc , Tube Type For 250 Kld Stp All As Specified & Directed Note: ( Sample Available At Age E / M Office ) 93 39. Taking Out Unservicable & Supply And Install , Test , Commissioning Flow Meter Rotameter Type , 11.4 M3 / Hr Size 50 Mm ( Sample Available At Age E / M Office ) 94 40 Taking Out Unservicable & Supply And Install, Test, Commissioning Air Flow Meter Rotameter Type, 54.0M3 / Hr Nb Size 32 Mm For Mbbr Tanks -01 ( Sample Available At Age E / M Office ) 95 41. Taking Out Unservicable & Supply And Install , Test , Commissioning Air Flow Meter Rotameter Type , 36 .0 M3 / Hr Nb Size 32 Mm For Mbbr Tanks-2 ( Sample Available At Age E / M Office ) 96 42. Taking Down U / S & M&L Switch Fuse Unit Rated Current Capacity 32 Amps With 6 Amp Hrc Fuses 4 Pole With Advance System And With On Off Indication Accessories Make L&T / Legrand / Schneider 97 43. Painting Work: Nm&L For Painting Of Installed Machineries At Swmming Pool Pump House Of The Followings: Using Scrapping Existing Paint And Spraying One Coat Of Synthetic Enamel Paint Over One Coat Of Primer For Following Items All As Directed 98 Pump Set With Motor :- 06 No 99 Sand Filter :- 01 No 100 Acf-01No 101 Air Blower -02 No 102 Suction Sweeper :- 01 No. 103 Lt Panel / Control Panel 104 All The Suction / Discharge Pipe Lines Complete Length 105 44 Taking Down U / S & Supply And Installation , Testing , Commissioning Of Hydrochloride Solution Dosing Pump Capable For 0- 6 Lpm For Maintang Free Chlorine @7.0 Ppm For Desinfection Complete With Suction And Discharge Pipe , Self Priming Foot Valve , Adapter , Pump Make Seko Or Equivalent Including All Accessories Such As Electrical / Control Connection Complete Note: The Cost Shall Be Included Power And Controll Cable Required Size And Core Recommended By Oem . Length Of Power And Control Cable 30 Rm Each N Sample Available At Age E / M Office 106 45. Supply & Fix Hdpe Tank Of 50 Ltr Hdpe Hypochlorite Dosing Tank With 50 Ltr Hypo Solution ( Naocl ) , 107 46. Taking Out U / S Pressure Gauge / Vaccume Gauge & Supply And Fix Pressure Gauge With Nipple 0-14 Kgs Rating Bourdons Tube Type Make H Guru Or Equivalent 108 47. Taking Out U / S & Supply And Fix Volt Mtr 0-500 Volt With Selector Switch-01No 109 48. Taking Out U / S & Supply And Fix Ammeter Mtr 0-100 Amp With Current Transformer With Selector Switch-01 Set 110 49 Taking Out U / S Bar Screen ( Coarse ) Size 25 Mm X 5 Mm Thick Bar Screen & Supply And Fix Size 25 Mm X 5 Mm Thick Bar Screen And Testing Commissioning Complete As All Directed 111 50. Taking Out U / S & Supply And Fix For Level Control Switch - For Equalization Tank & Filter Feed Tank Suitable For 250 Kld Stp Plant Including Electrical Cable / Control Wiring And Testing Commissioning Complete As All Directed Note: Sample Available Ar Age E / M Office 112 51. Cutting Of Vegetation / Grasses Earth Hips Etc, Cleaning And Leveling Of Cutting Areas In Stp Area Installaions Surrounding Of Pump , Filters Water Storage Tanks Complete All As Specified And Directed 113 52. Grubbing Up Tree Trunk Including Cutting Of Trunk Portion Protruding Over Ground , Digging Out Roots , Filling Holes And Levelling Off Ground Stacking Of Serviceable Material And Removing Of Unserviceable Material To A Distance N Exc . 50 M And Clearing Site All As Directed 114 53. Material And Labour For Temporary Shade Size 1.5 Mx 1.5 X1 Mtr Height Using Gi Sheet Made Of Gi Sheet 0.63 Mm Thick In Cluding Supporting Angles And Pcc Work For Shade Work 115 54. Taking Out The Existing Pump And Motor From The Base Plate Of Capacity Up To 7.5 Hp Including Disconnecting The Existing Electrical Connection, Suction And Delivery Line Including Earth Work And Breaking The Existing Pcc Foundation And Providing New Pcc For Fixing The Up To 7.5 Hp Pump Set Pipe Line Foundation As Per Manufacture Design, And Refixing The Pump Set Including Necessery Electrical Connection And Water Connection Testing Complete. 116 55. Material And Labour For Pcc In 1:2:4 Type B1 Using 20Mm Graded Stone Aggregate As In Couping , Kneelers, Including Weathering Rounded Or Chamferedangles And As Directed. Foundation Filling And Mass Concrete Complete All As Specified. 117 56. Material And Labour For Disconnecting The Existing 80Mm Gi Pipe , Suction And Delivery Of Any Type From The Pump Set And Fixing Hose Pipe 80 / 50 / 40 Mm Dia Mm Bore And Rubber Flange Joints Complete For Suction And Supply Delivery Side Including Necessary Nuts Bolts And Rubber Etc, All As Specified And Directed. Note: The Cost Shall Be Included All Fittings Such As X Nipple , Clamp, Nut Bolts Flanges , Socket, Union Etc For For Fixing Of Hose Pipe In To The Existing Pump 118 57. Taking Out Unservicable Pvc Pipe And Supply And Fix Garden Irrigation Green Hose Pipe Pvc Material With Fibre Reinforce 40 Mm Bore Including Suitable Metal Clamps With Nut And Bolts 119 58. Taking Out Unservicable Pvc Pipe And Supply And Fix Garden Irrigation Green Hose Pipe Pvc Material With Fibre Reinforce 50 Mm Bore Including Suitable Metal Clamps With Nut And Bolts

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	17-Jan-2020	Corrigendum 02	Date	24-01-2020

INR 500 /-

INR 28200.0 /-

INR 14.10 Lakhs /-

Name of Work: OUT SOURCING AND MAINTENANCE OF STP (MAP) AT VSN NAGPUR
	Sl. No.	SL No. / Item Description	Item Code / Make	Quantity	Units
1	1	1. Outsourcing and maintenance of MBBR based sewage treatment plant capacity 250 KLD at MAP area VSN , for operatng the pump set , blowers and filtrers, treated water pump, and all connected equipments to main tain the required parameters of treated effluent in all respects , for each shift of 08 hrs two shifts by skilled personal 01 nos in each shifts of 08 hrs for three shifts a day (first shift i.e 06 hrs ot 1400 hrs), second shift 1400 hrs to 2200 hrs) third shift 2200 hrs to 0600 hrs) including sunday and holidays making the arrangement for reliver the operator shall properly record the log book and cleaning of installlatin including toilet is the responsibility of contractor all as specified and as directed.		330	Each Day
2	2	(a) Log Book, Log Sheet & Chemical Consumption records shall be in contractor scope & testing of water (with parameters like. PH, TDS, COD, BOD, Total coliform & Free Residual chlorine) through reputed/NABL Lab and the same shall be produced & recorded by department & needs to be approved by Engineer-in-charge on quarterly basis.(Contractor will provide chlorine testing kit and OT solution for testing of water and cost of the same shall be deemed to be included in the quoted rate of the respective item.
3	3	(b) Contractor shall be responsible for security for the premises on round the clock basis if any losses/damages occured at the primises the same shall be born by conmtractor.
4	4	(c) Contractor shall be responsible for providing all the safety personal protective eqipments to their manpower deployed for safe operation, prices for safety PPE's like Gas Mask, Helmet, Apron, Handglobes, Electrical Safety Equipments & Safety shoes shall be included in contractor scope.
5	5	(d) The rate quoted shall be deemed to include the cost of material & labour for the following:-
6	6	(i) Routine maintence of pump sets including motor as per manufacturer's instruction (Item No. 01 Contd//….)
7	7	(ii) Comprehensive repair and maintenance of one number main control panel like replacement of unserviceable wiring and push button, strat button, amp mtr, volt mtr indication button and compressor starter switch etc, the cost shall be included total overhaulling of motor control panel and make it fully serviceable. Routine maintenance of LT panels inside of buildings with motor starter for pump sets.
8	8	(iii) Checking of proper functioning of star delta starter for pump sets and replacements of minor spare parts.
9	9	(iv) Checking the foot valve of pump sets and rectify the defects
10	10	(v) Routine maintenence of dosing system.
11	11	(vi) Replacement of foot valve jeep leather and repair to any leakage in suction pipe line and header pipe line in pump house premises.
12	12	(vii) Maintenance and operation of all filter plants including all valve's including repair and gland packing.
13	13	(viii) The minimum qualification of the staff to be employed by the contractor will have minimum ITI passed for skilled and 10th passed for semiskilled.
14	14	(ix) Maintaining the daily running record of pump and entering in log sheet register (log sheet to be provided by the contractor as directed by Engineer-in-Charge.
15	15	(x) In case of any staff is found absent from the duty, no payment will be made for that shift and penalty of double the quoted rate wil be made.
16	16	(xi) Any damage to machinery / equipment due to wrong handling, will be the responsibility of the contractor and the damage shall be completely rectified to the entire satisfaction of Engineer-in-charge
17	17	(xii) Attendence register for personnel employed by the contractor to be maintained and produced to EIC at the time of payment(RAR)
18	18	(xiii) To provide additional manpower for rectification of major problems
19	19	(xiv) All types of T&P required for day to day requirements shall be provide by the contractor
20	20	(xv) All types of transportation if required for handling materials /equipts etc shall be provided by the contractor
21	21	(xvi) All types of fire equipts provided in all the installations shall be maintained and operated properly
22	22	(xvii) All electrical fittings and fixtures to be maintained and contractor shall be responsible for any damage
23	23	(xviii) All types of water tanks including flushing tanks shall be maintained
24	24	(xix) All installations to be kept neat and clean all the time and security checks to be carried out daily
25	25	(xx) Uniform to be maintained for employees for workingin O&M of STP
26	26	(xxiv) All safety equipments such as breathing apparatus, safety belts, air hose respiratory, portable lighting equipments, driversuit etc working hazardous condition to be provided by contractor (Item No. 01 Contd//….)
27	27	(xxii) First Aid Box with basic medicines to be kept in main installation by the contractor as directed
28	28	(xxiii) Misuse of electricity and water to be penalised and effective recovery will be made by the department
29	29	2. Testing of treated water sample collected from vayusena nagar nagpur and testing report required from through reputed laboratory as per BIS -10500:2012 for sewage treated water are required folowing test; Followings parameters for waste treated water should be maintained by the contractor of stp plant: -\nPH 6.5-8.5, TDS; BOD MG/L- <10; COD MG/L <150; TSS (Total suspended solids) MG/L <10; COLI FORM COUNT - COUNTS/100ML; RESIDUAL CHLORINE - >1.0		4	Job
30	30	3. Supply of Trichloroisocyanuric Acid (90%) (C3CI3N303) Chlorine Granuals (90%) Size 5-8 Mesh, Appearance : White Granuals, Effective Chlorine : 90%, pH : 2.7 to 3.3\nNote: - Mixing & dosing will be in Contractor scope as directed BY Enfr-In-charge.		300	Kg
31	31	4. SEWAGE TRANSFER PUMP (HORIZANTAL TYPE):- M&L for opening pump set split case centrifugal of capacity 10.5 m3/hr with head of 12 mwc Kirloskar make from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lath works all as specified at 250 KLD STP at AF Vayusena Nagar.\nNote: - Major Spares Parts will be measured & paid seperatly as supply only.		1	Job
32	32	5. Supply only spare parts for pump set for fixing against item No. 4 as follows:-
33	33	a) Supply only pump shaft sleeve made out of gun metal		1	Each
34	34	b) Supply only key for main shaft/impeller		1	Each
35	35	c) Supply only motor pump coupling complete with nut, bolts etc		1	Each
36	36	d) Supply only pump set bearing housing		1	Each
37	37	e) Supply only pump Shaft		1	Each
38	38	f) Supply only ball/roller bearing complete		1	Each
39	39	g) Supply only impeller		1	Each
40	40	6. TREATED WATER TRANSFER PUMP SET :- M&L for opening pump set split case centrifugal of capacity 7.5 HP Kirloskar make from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lath works all as specified at 250 KLD STP at AF Vayusena Nagar.\nNote: - Major Spares Parts will be measured & paid seperatly as supply only.		1	Each
41	41	7. Supply only spare parts for treated water transfer pump set as follows:-
42	42	a) Supply only pump shaft sleeve made out of gun metal		1	Each
43	43	b) Supply only key for main shaft/impeller		1	Each
44	44	c) Supply only check nut for pump set shaft		1	Each
45	45	d) Supply only motor pump coupling complete with nut, bolts etc		1	Each
46	46	e) Supply only pump set bearing housing		1	Each
47	47	f) Supply only pump Shaft		1	Each
48	48	g) Supply ball/roller bearing complete		1	Each
49	49	h) Supply only impeller		1	Each
50	50	8. FILTER FEED PUMP (HORIZANTAL CENTRIFUGAL MONO BLOCK TYPE) : - M&L for opening pump set monoblock type of capacity 11.4 Cum/Hr @ 26 mtr head 2.2 KW 2900 rpm Kirloskar make coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lath works all as specified at 250 KLD STP at AF Vayusena Nagar.\nNote: - Major Spares Parts will be measured & paid seperatly as supply only		1	Job
51	51	9. Supply only spare parts for feed pump as follows:-
52	52	(a)Supply Only Pump Bearing		1	Each
53	53	(b)Supply Only Pump Shaft Sleev, Gland Packng & Oil Seal		1	Each
54	54	(c) Supply only pump Shaft		1	Each
55	55	(d) Supply only impeller		1	Each
56	56	10. AIR BLOWER FOR STP :- M&L for opening air blower set twin lobe type of capacity 140 Cum / Hr with head of 0.65 m Make Everest rpm 1367 , blower & motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lath works all as specified at 250 KLD STP at AF Vayusena Nagar Note :- Major Spares Parts will be measured & paid seperatly.as supply only		1	Job
57	57	11. Supply only spare parts for Air blower follows:-
58	58	a)Supply Only Blower Bearing of size 22210 make SKF		1	Each
59	59	b)Supply Only Blower V Belt of size "B1465 LP/B56"		1	Each
60	60	c)Supply Only Blower Pulley of size "OD-187.5 mm/ID-62.5 mm		1	Each
61	61	d)Supply Only Blower Oil Seal & Packing		1	Each
62	62	e)Supply Only Blower Suction Filter		1	Each
63	63	f)Supply and fill Blower Oil No. 90 Servo/Shell		20	Ltr
64	64	12. Taking down electric motor 7.5kw/10 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop opening carefully the rotor and stator winding and cleaning and removing all dust and dirt carefully ,warnishing the stator to enhance the insulation level, baking, drying complete, greasing reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.		1	Each
65	65	13. Taking down electric motor 2.8 kw/ 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop opening carefully the rotor and stator winding and cleaning and removing all dust and dirt carefully ,warnishing the stator to enhance the insulation level, baking, drying complete, greasing reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.		1	Each
66	66	14. Taking down electric motor 1.75 kw/ 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop opening carefully the rotor and stator winding and cleaning and removing all dust and dirt carefully ,warnishing the stator to enhance the insulation level, baking, drying complete, greasing reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.		1	Each
67	67	15. M & L for Rewinding of pump motor 415 Volt 3 phase after disconnecting electric cable and eath lead, suction and delivery pipes, shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator and cleaning the stator slots and core assembly, rewinding to stator with suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning complete in all respect all as specified and as directed by Engr-in-charge for the following capacity: -
68	68	(a) 7.5 kw/ 10 HP		1	Each
69	69	(b) up to3 kw		1	Each
70	70	16. Material and labour for cleaning of Equalisation sewage tank for 250 KLD STP by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump suitable capacity surface complete in all in as specified and directed.using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge for the following Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be the contractor unser his own arrangement.		1	Each Job
71	71	17 Material and labour for cleaning of MBBR REACTOR TANK/TUBE SETTLER TANK/ sewage tank for 250 KLD stp by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pumpsuitable capacity complete .using acid and other suitable methods before filling as required at site . Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be the contractor under his own scope arrangement.		1	Each Job
72	72	18. Material and labour for cleaning of HYPO SOLUTION TANK/TREATED WATER TANK/ sewage tank for 250 KLD stp by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface complete in all in as specified and directed.using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge for the following Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be contractor scope under his own arrangement.		1	Each Job
73	73	19. Material and labour for cleaning of Sludge dryer TANK/ for 250 KLD stp by cleaning entire internal surface by removing dirt, sludge etc with fresh water and clean entire surface repeatedly with fresh water and draining out soiled waste material including using suitable equipment /tools surface complete in all in as specified and directed.using acid all as specified and directed by Engineer-In-Charge for the following		4	Each
74	74	20. Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 50 dia complete with nuts,bolts,rubber gaskets etc including ,testing ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 50 mm all as specified and as directed by Eng-in-Charge Make: Kirloskar or Venus all as specified..		1	Each
75	75	21. Taking out unserviceable & Supply and fix CI body foot valve conforming to IS of size 80 dia complete with nuts,bolts,rubber gaskets etc including ,testing all as specified.		1	Each
76	76	22. Taking out unserviceable butter fly valve of size 40 mm bore and supply and fix new butter fly valve wafer type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel Disc & stem, Liver operated as per IS 13095 in PN 1.0 in including jointing material such as rubber gasket,bolts,nuts,etc direct integrally all as specified and as directed by Eng-in-Charge Make: Kirloskar or kARTAR ,/ ISI		1	Each
77	77	23. Taking out unserviceable butter fly valve of size 50 mm bore and supply and fix new butter fly valve wafer type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel Disc & stem, Liver operated as per IS 13095 in PN 1.0 in including jointing material such as rubber gasket,bolts,nuts,etc direct integrally all as specified and as directed by Eng-in-Charge Make: Kirloskar or kARTAR/ISI ,/zoloto		1	Each
78	78	24. Taking out unserviceable butter fly valve of size 65 mm bore and supply and fix new butter fly valve wafer type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel Disc & stem, Liver operated as per IS 13095 in PN 1.0 in including jointing material such as rubber gasket,bolts,nuts,etc direct integrally all as specified and as directed by Eng-in-Charge Make: Kirloskar or kARTAR ,/ ISI/zoloto		1	Each
79	79	25. Taking out unserviceable butter fly valve of size 80 mm bore and supply and fix new butter fly valve wafer type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel Disc & stem, Liver operated as per IS 13095 in PN 1.0 in including jointing material such as rubber gasket,bolts,nuts,etc direct integrally all as specified and as directed by Eng-in-Charge Make: Kirloskar or kARTAR /ISI/zoloto ,		1	Each
80	80	26. Taking out unserviceable ball valve & supply and fix ball valve 1/2" size in CI Body including all accessories and as directed by Eng-in-Charge Make: Kirloskar or kARTAR /ISI ,/zoloto		1	Each
81	81	27. Supply and Laying only, LT UG XLPE insulated 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire of tape and connecting up to the electrical system with suitable size of aluminium lugs of size 6 Sqmm 3 Core all as specified and as directed.		20	Rm
82	82	28. Supply and Laying only, LT UG XLPE insulated 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire of tape and connecting up to the electrical system with suitable size of aluminium lugs of size 2.5 Sqmm 3 Core all as specified and as directed.		40	Rm
83	83	29. Replacements of unserviceable nut bolts of any sizes 12x55 mm,16x55 mm,12x110mm,16x110 mm		5	Kg
84	84	30. Taking out unservicable & S & F MCCB 3 pole 63amps 'C' series, breaking capacity 35 Ka, 'C' curve 415 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. Make : Legrand /Havell Hager, L&T.		1	Each
85	85	31. Taking out Unserviceable filter media & refilling or Replacement of filter media (pabble) suitbale size for 250 kld STP dual media filter all as specified and directed.		350	Kg
86	86	32. Replacement of filter media (Gravel) suitbale size for 250 kld STP dual media filte All as specified and directed.		450	Kg
87	87	33. Replacement of filter media (Coarse Sand suitbale size for 250 kld STP dual media filte All as specified and directed.		450	Kg
88	88	34. Replacement of filter media (fine Sand ) suitbale size for 250 kld STP dual media filter All as specified and directed.		700	Kg
89	89	35. Replacement of filter media (Antheracite suitbale size for 250 kld STP DMF. All as specified and directed.		250	Kg
90	90	36. Replacement of Carbon for ACF (activated carbon filter) media suitbale size for 250 kld STP All as specified and directed.		325	Kg
91	91	37. Replacements of unserviceable media for MBBR Type of media floating PP, cylindrical shaped, specific gravity 0-90 -0-95 gms/cm3, colour black for 250 kld Note: Sample available at AGE E/M office		3	Cum
92	92	38. Replacements of unserviceable media for settler tank (tube deck media) type pvc , tube type for 250 kld stp all as specified & directed Note: (Sample available at AGE E/M office)		4	Cum
93	93	39. Taking out unservicable & Supply and install , test , commissioning flow meter rotameter type , 11.4 m3 / hr size 50 mm (Sample available at AGE E/M office)		1	Each
94	94	40 Taking out unservicable & Supply and install, test, commissioning Air flow meter rotameter type, 54.0m3 / hr nb size 32 mm for MBBR tanks -01(Sample available at AGE E/M office)		1	Each
95	95	41. Taking out unservicable & Supply and install , test , commissioning Air flow meter rotameter type , 36 .0 m3 / hr nb size 32 mm for MBBR tanks-2 (Sample available at AGE E/M office)		1	Each
96	96	42. Taking down U/S & M&L switch fuse unit rated current capacity 32 amps with 6 amp hrc fuses 4 pole with advance system and with on off indication accessories Make L&T/Legrand/Schneider		1	Each
97	97	43. Painting work: \nM&L for Painting of Installed Machineries at Swmming Pool Pump House of the followings: using scrapping existing paint and spraying one coat of synthetic enamel paint over one coat of primer for following items all as directed		1	Job
98	98	Pump Set with motor :- 06 No
99	99	Sand Filter :- 01 No
100	100	ACF-01No
101	101	Air Blower -02 No
102	102	Suction Sweeper :- 01 No.
103	103	LT Panel/Control panel
104	104	All the suction/discharge pipe lines complete length
105	105	44 Taking down U/s & Supply and installation , testing , commissioning of hydrochloride solution dosing pump capable for 0- 6 lpm for maintang free chlorine @7.0 ppm for desinfection complete with suction and discharge pipe , self priming foot valve , adapter , Pump make SEKO or equivalent including all accessories such as electrical/ control connection complete Note: The cost shall be included power and controll cable required size and core recommended by oem . Length of power and control cable 30 rm each\n Sample available at AGE E/M office		1	Each Job
106	106	45. Supply & fix HDPE tank of 50 ltr HDPE Hypochlorite dosing tank with 50 ltr hypo solution (NAOCL),		4	Each
107	107	46. Taking out U/S Pressure gauge/vaccume gauge & Supply and fix pressure gauge with Nipple 0-14 kgs rating bourdons' tube type Make H Guru or equivalent		2	Each
108	108	47. Taking out U/S & supply and fix volt mtr 0-500 volt with selector switch-01no		1	Each
109	109	48. Taking out U/S & supply and fix ammeter mtr 0-100 amp with current transformer with selector switch-01 set		1	Each
110	110	49 Taking out U/S bar screen (coarse) size 25 mm x 5 mm thick bar screen & supply and fix size 25 mm x 5 mm thick bar screen and testing commissioning complete as all directed		1	Each
111	111	50. Taking out U/S & supply and fix for level control switch - for equalization tank & filter feed tank suitable for 250 kld stp plant including electrical cable / control wiring and testing commissioning complete as all directed Note: Sample available ar AGE E/M office		1	Each set
112	112	51. Cutting of vegetation / grasses earth hips etc, cleaning and leveling of cutting areas in stp area installaions surrounding of pump , filters water storage tanks complete all as specified and directed		200	SQM
113	113	52. Grubbing up tree trunk including cutting of trunk portion protruding over ground , digging out roots , filling holes and levelling off ground stacking of serviceable material and removing of unserviceable material to a distance n exc . 50 m and clearing site all as directed		10	Each
114	114	53. Material and labour for temporary shade size 1.5 mx 1.5 x1 mtr height using GI sheet made of GI sheet 0.63 mm thick in cluding supporting angles and PCC work for shade work		3	Job
115	115	54. Taking out the existing pump and motor from the base plate of capacity up to 7.5 HP including disconnecting the existing electrical connection, suction and delivery line including earth work and breaking the existing PCC foundation and Providing new PCC for fixing the up to 7.5 HP Pump set pipe line foundation as per manufacture design, and refixing the pump set including necessery electrical connection and water connection testing complete.		4	Job
116	116	55. Material and labour for PCC in 1:2:4 Type B1 using 20mm graded stone aggregate as in couping ,kneelers,including weathering rounded or chamferedangles and as directed. foundation filling and mass concrete complete all as specified.		3	cum
117	117	56. Material and Labour for Disconnecting the existing 80mm GI pipe ,suction and delivery of any type from the pump set and fixing Hose pipe 80/50/40 mm dia mm bore and rubber flange joints complete for suction and supply delivery side including necessary nuts bolts and rubber etc, all as specified and directed. Note: The cost shall be included all fittings such as 'X' Nipple , Clamp, Nut bolts Flanges , socket, union etc for for fixing of Hose pipe in to the existing pump		4	Job
118	118	57. Taking out unservicable pvc pipe and Supply and fix garden irrigation green hose pipe PVC material with fibre reinforce 40 mm bore including suitable metal clamps with nut and bolts		20	RM
119	119	58. Taking out unservicable pvc pipe and Supply and fix garden irrigation green hose pipe PVC material with fibre reinforce 50 mm bore including suitable metal clamps with nut and bolts		15	RM