Supply Of Steel Fabrication Items For Construction Of Stone Structures., 117 Engineer Regiment Pin 914117 c/o 56 APO-Uttar Pradesh

Supply Of Steel Fabrication Items For Construction Of Stone Structures. - 1.01 Srt 2100Mm Long 615Mm Wide, 2Mm Thick Isi Mark Hot Rolled Carbon Steel Sheets, Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Make:Sail / Tata / Ispat / Jindal With Nos Of Capsule Shaped Hole Having 10Mm Dia And 20Mm Length. 1.02 Ismb 250 ( 3400 Mm Long ) Conforming To Is-226 Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Make: Sail / Tata / Ispat / Jindal. 1.03 Ismb 250 ( 2200 Mm Long ) Conforming To Is-226 Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Make: Sail / Tata / Ispat / Jindal 1.04 Ismb 150 ( 1200 Mm Long ) Conforming To Is-226 Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Make: Sail / Tata / Ispat / Jindal. 1.05 Tmt Bar 8Mm Confirming To Is - 1768 ( 2008 ) And Make: Sail / Tata / Ispat / Jindalsteel 1.06 Loop Holes Of Size 600X500 Mm Will Be Provided With Purpose Made ‘U’ Channel Frame. A Trapezoidal Frame As Per The Drawing Shall Be Made Of Angle Iron 50X50x6 Mm, 45X45x6 Mm And Flat Iron 40X6 Mm Covered With 2 Mm Thick Ms Sheet On Four Sides Except Outer And Inner Opening With 4 Nos Hold Fast Size 200X50x6 Mm Flat Iron Two On Either Side With Ms Shutter Made Of 8 Mm Thick Ms Plate 300X480 Mm 02 Nos With Sliding Slit Of 75X75 Mm On One Shutter. The Shutters Should Be Fixed With Required Nos Of Heavy Duty Box Hinges Of 10 Mm Size. With The Dimension Of The Outer Opening Of The Loop Hole Box Being 900Mm X 800Mm. Ms Tower Bolt 2 Nos 16 Mm Dia 200 Mm Long To Be Provided To Shut The Doors. The Doors Should Be Opening Inside With Locking Arrangement In The Form Of Hook Of 6 Mm Dia To Prevent The Door From Closing Back Again Whenever Required. Edges Of The Loop Holes To Be Chamfered Evenly. All Steel Parts Shall Be Conforming To Is-226 & Prepainted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Sail / Tata / Ispat / Jindal Brand Iron Parts To Be Used For The Loophole Fabrication. 1.07 Steel Door Of Size 750X1800 Mm Shall Be Provided As Per Drawing. Main Frame Work Shall Be Of Ms Angle 50X50x6 Mm. Ms Sheet 2 Mm Thick Shall Be Provided As Cladding Of The Door With Flat Iron 25X4 Mm Bracings Including Locking Arrangements On Both Sides Of The Shutters. The Door Shall Be Open-Able Inwards. The Door Shall Have Sliding Opening 900Mm X 250Mm Made Of 14 Guage Ms Sheet With Handle, With 04 Nos 12Mm Dia Guard Bars At 1200 Mm From Bottom. Necessary Handles And Other Fittings Will Be Provided Both Sides Of Door. The Door Frame Will Have 06 Nos Hold Fast 200 Mm Long Made Of 50X6 Mm Flat Iron. Job No Will Be Engraved On The Inner Side. All Steel Parts Shall Be Conforming To Is- 226 And Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Sail / Tata / Ispat / Jindal Steel Branded Iron Parts To Be Used For The Door Fabrication. 1.08 Steel Window Of Size 750X900 Mm Shall Be Provided As Per Drawing. Main Frame Work Shall Be Of Ms Angle 50X50x6 Mm. Ms Sheet 2 Mm Thick Shall Be Provided As Cladding Of The Window With Flat Iron 25X4 Mm Bracings Including Locking Arrangements On Both Sides Of The Shutters. The Window Shall Be Open-Able Inwards. Necessary Handles And Other Fittings Will Be Provided Both Sides Of Window. The Window Frame Will Have 04 Nos Hold Fast 200 Mm Long Made Of 50X6 Mm Flat Iron. Job No Will Be Engraved On The Inner Side. All Steel Parts Shall Be Conforming To Is-226 And Pre Painted With Two Coats Of Og Colour Over One Coat Of Red Oxide. Sail / Tata / Ispat / Jindal Steel Branded Iron Parts To Be Used For The Window Fabrication. 1.09 10 Mm Dia Bolts With Nut & Bitumen Washer 150Mm Long With Isi Mark For Fixing Srt 1.1 Double Sleeping Bunks ( Dsb ) , 1.11 Glazing On Front 3 Sides Of Bunker:- 1.12 Store Rack , 2 Steel Items For Malari Loc, 2.1 Double Sleeping Bunks ( Dsb ) 2.11 Glazing On Front 3 Sides Of Bunker , 2.12 Store Rack .

Refer document

INR 44900.0 /-

Refer document