Reinforcement Work Of Kalady Police Station Phase 2 Reinforcement Work Of Kalady Police Station Phase 2
Tender Value
6.13 Lakhs
Estimated cost
Bid Submission
04 Jan 2020
0 days left
EMD
15339
Bank guarantee accepted
Document Fee
1448
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KALADY → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Corrigendum - Reinforcement Work Of Kalady Police Station Phase 2 Reinforcement Work Of Kalady PoliceStation Phase 2
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Jan-2020 | Date extension corrigendum | Date | 04-Jan-2020 |
BOQ
| Name of Work: Reinforcement work of Kalady Police Station Phase 2 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)(13.1.1) | BI01010001010000000000000515BI0100001113 | 90 | sqm |
| 2 | 2 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer(13.43.1) | BI01010001010000000000000515BI0100001114 | 356.967 | sqm |
| 3 | 3 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)(13.46.1) | BI01010001010000000000000515BI0100001115 | 356.967 | sqm |
| 4 | 4 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture(13.48.2) | BI01010001010000000000000515BI0100001116 | 356.967 | sqm |
| 5 | 5 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work(13.61.1) | BI01010001010000000000000515BI0100001117 | 356.967 | sqm |
| 6 | 6 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be\nspecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(11.36) | BI01010001010000000000000515BI0100001118 | 24.36 | sqm |
| 7 | 7 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the\nmanufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.(11.37) | BI01010001010000000000000515BI0100001119 | 6.611 | sqm |
| 8 | 8 | Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm(11.46.2) | BI01010001010000000000000515BI0100001120 | 63.226 | sqm |
| 9 | 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood(9.1.1) | BI01010001010000000000000515BI0100001121 | 0.483 | cum |
| 10 | 10 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood (9.7.1) | BI01010001010000000000000515BI0100001122 | 0.311 | sqm |
| 11 | 11 | Providing and fixing glazed shutters for door, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. Pressed butt hinges bright finished of required size with necessary screws.Kiln seasoned and chemically treated hollock wood35 mm thick(9.9.2.1) | BI01010001010000000000000515BI0100001123 | 9.48 | sqm |
| 12 | 12 | Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. ressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.Second class teak wood35 mm thick shutters(9.5.1.1) | BI01010001010000000000000515BI0100001124 | 6.721 | sqm |
| 13 | 13 | Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square,\nround bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc(9.48.2) | BI01010001010000000000000515BI0100001125 | 230 | kg |
| 14 | 14 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer all complete.(10.1) | BI01010001010000000000000515BI0100001126 | 108 | kg |
| 15 | 15 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)(21.1.1.1) | BI01010001010000000000000515BI0100001127 | 0.421 | kg |
| 16 | 16 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)(21.1.2.1) | BI01010001010000000000000515BI0100001128 | 0.421 | kg |
| 17 | 17 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side(21.2.1) | BI01010001010000000000000515BI0100001129 | 30 | sqm |
| 18 | 18 | Plumbing works | BI01010001010000000000000515BI0100001130 | ||
| 19 | 18.1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (2.8.1) | BI01010001010000000000000515BI0100001131 | 7.943 | cum |
| 20 | 18.2 | Providing and fixing PVC Septic tank of approved make and brand of 6 users / 15 Flush / 1700 L capacity with Sock pit in concrete of size near 0.90x0.90x0.90 m (LMR) | BI01010001010000000000000515BI0100001132 | 1 | each |
| 21 | 18.3 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall (50.18.9.19.1) | BI01010001010000000000000515BI0100001133 | 3 | metre |
| 22 | 18.4 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow 50.18.9.22.1 | BI01010001010000000000000515BI0100001134 | 8 | no. |
| 23 | 18.5 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall (50.18.9.14.1) | BI01010001010000000000000515BI0100001135 | 6 | metre |
| 24 | 18.6 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2 (50.18.8.2.2) | BI01010001010000000000000515BI0100001136 | 6.6 | metre |
| 25 | 18.7 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge Concealed work, including cutting chases and making good the wall etc. 15 mm pipe 10kgf/cm2 (50.18.8.1.2) | BI01010001010000000000000515BI0100001137 | 9 | metre |
| 26 | 18.8 | Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 (50.18.9.9.1) | BI01010001010000000000000515BI0100001138 | 3 | metre |
| 27 | 18.9 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (18.32) | BI01010001010000000000000515BI0100001139 | 1 | each |
| 28 | 19 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid each (17.2.2) | BI01010001010000000000000515BI0100001140 | 3 | each |
| 29 | 19.1 | Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. (50.17.1.4) | BI01010001010000000000000515BI0100001141 | 2 | each |
| 30 | 19.2 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (17.7.4) | BI01010001010000000000000515BI0100001142 | 2 | each |
| 31 | 19.3 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia (17.28.2.2) each | BI01010001010000000000000515BI0100001143 | 2 | nos |
| 32 | 19.4 | Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. (17.30) | BI01010001010000000000000515BI0100001144 | 3 | Each |
| 33 | 19.5 | Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal dia (18.58.1.1) | BI01010001010000000000000515BI0100001145 | 3 | Each |
| 34 | 19.6 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 18.18.2 20 mm nominal bore each 327.05 | BI01010001010000000000000515BI0100001146 | 1 | Each |
| 35 | 19.7 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore (18.51.1) | BI01010001010000000000000515BI0100001147 | 3 | Each |
| 36 | 19.8 | Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. (50.17.1.1) | BI01010001010000000000000515BI0100001148 | 2 | Each |
| 37 | 19.9 | Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. (50.17.1.2) | BI01010001010000000000000515BI0100001149 | 2 | Nos |
| 38 | 20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable ocking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(18.48 ) | BI01010001010000000000000515BI0100001150 | 500 | L |
| 39 | 21 | Electrical Works | BI01010001010000000000000515BI0100001151 | ||
| 40 | 21.1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. | BI01010001010000000000000515BI0100001152 | ||
| 41 | 21.11 | 1.10.1 (Group A) | BI01010001010000000000000515BI0100001153 | 9 | point |
| 42 | 21.2 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. | BI01010001010000000000000515BI0100001154 | ||
| 43 | 21.21 | 1 or 2 Module (75 mmX75 mm) (1.27.1) | BI01010001010000000000000515BI0100001155 | 5 | each |
| 44 | 21.22 | 8 Module (125 mmX125 mm)(1.27.5) | BI01010001010000000000000515BI0100001156 | 2 | each |
| 45 | 21.3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. | BI01010001010000000000000515BI0100001157 | ||
| 46 | 21.31 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(1.7.1) | BI01010001010000000000000515BI0100001158 | 34 | mtr |
| 47 | 21.32 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire(1.7.3) | BI01010001010000000000000515BI0100001159 | 23 | mtr |
| 48 | 21.4 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (1.25) | BI01010001010000000000000515BI0100001160 | 2 | each |
| 49 | 21.5 | Supply and Fixing 1200 mm sweep- 5 star rated Ceiling fan, complete with 300mm down rod, canopies, shackles and blades working on 230 /240 AC.standard make as approved by the site engineer.(LMR) | BI01010001010000000000000515BI0100001161 | 2 | each |
| 50 | 21.6 | Supply and Fixing 150mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230V single phase A/C.standard make as approved by the site engineer.(LMR) | BI01010001010000000000000515BI0100001162 | 2 | each |
| 51 | 21.7 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(1.24) | BI01010001010000000000000515BI0100001163 | ||
| 52 | 21.71 | 5/6 A switch(1.24.1) | BI01010001010000000000000515BI0100001164 | 2 | each |
| 53 | 21.72 | 3 pin 5/6 A socket outlet(1.24.4) | BI01010001010000000000000515BI0100001165 | 2 | each |
| 54 | 21.73 | 15/16 A switch(1.24.3) | BI01010001010000000000000515BI0100001166 | 1 | each |
| 55 | 21.74 | 6 pin 15/16 A socket outlet(1.24.5) | BI01010001010000000000000515BI0100001167 | 1 | each |
| 56 | 21.8 | Supplying and fixing brass batten/ angle holder including connections etc. as required.(1.34) | BI01010001010000000000000515BI0100001168 | 4 | each |
| 57 | 21.9 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. (1.33) | BI01010001010000000000000515BI0100001169 | 4 | each |
| 58 | 22 | Supply and installation of 9W LED bulb. (Make: Philips/Crompton/equivalent)(LMR) | BI01010001010000000000000515BI0100001170 | 4 | nos |
| 59 | 22.1 | Supplying and installation of LED tube light fitting suitable for single 20 W with lampholder.(LMR) | BI01010001010000000000000515BI0100001171 | 2 | each |
| 60 | 22.2 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. | BI01010001010000000000000515BI0100001172 | ||
| 61 | 22.21 | Single pole(2.10.1) | BI01010001010000000000000515BI0100001173 | 4 | each |
| 62 | 22.3 | Supply and installation of 9W Led Ceiling Spot Focus Light (Make: Dewton/Citra)(LMR) | BI01010001010000000000000515BI0100001174 | 1 | each |
| 63 | 22.4 | Providing and fixing 2 nos of uPVC door of approved make as per instruction of engineer in charge including cost of materials, conveyance charges, labours etc…(LMR) | BI01010001010000000000000515BI0100001175 | 2 | nos |
AI Tender Summary
Tender Timeline
Jan 02, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 04, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 06, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender