Construction Of Wall Compound To Z . P . Primary School Building At . Bori Khu . Tq . Maregaon Dist . Yavatmal
Tender Value
16.90 Lakhs
Estimated cost
Bid Submission
06 Jan 2020
0 days left
EMD
17000
Bank guarantee accepted
Document Fee
560
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MAREGAON → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Wall Compound To Z . P . Primary School Building At . Bori Khu . Tq . Maregaon Dist . Yavatmal
BOQ
| Name of Work: CONSTRUCTION OF WALL COMPOUND TO Z.P. PRIMARY SCHOOL BUILDING AT.BORI KHU.TQ.MAREGAON DIST. YAVATMAL | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Removing wire fencing with wooden post and stacking the material with all leads, lifts etc. complete. | 134.4 | rmt | |
| 2 | 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means | 189 | Cum | |
| 3 | 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. | 37.8 | Cum | |
| 4 | 4 | Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation andbedding including bailing out water, Steel centering, formwork,\nlaying/pumping, compacting, roughening them if special finish is tobe provided, finishing if required and curing complete, with fullyautomatic micro processor based PLC with SCADA enabled\nreversible Drum Type mixer/concrete Batch mix plant (Pan mixer)etc. complete. With fine aggregate (Natural Sand / Crushed sandVSI Grade finely washed etc) (SSR IT No.24.01 P.No. ) | 21.9 | Cum | |
| 5 | 5 | Providing and laying in situ /Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. work infoundations like raft, strip foundations, grillage and footings of R.C.\nC. columns and steel stanchions etc. including bailing out water,Steel centering formwork, laying/pumping cover blocks,compaction and curing roughening the surface if special finish is to\nbe provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mix\nplant (Pan mixer) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc) (SSR IT No.25.11 P.No. 222) | 16.56 | Cum | |
| 6 | 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20of trap / granite /quartzite/ gneiss metal for R.C.C. columns as perdetailed designs and drawing or as directed including steelcentering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficientminimum thickness to give a smooth and even surface orroughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fullyautomatic micro processor based PLC with SCADA enabledreversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)\netc. complete. With fine aggregate (Natural Sand / Crushed sandVSI Grade finely washed etc) (SSR IT No.25.31 P.No. 224) | 9.54 | Cum | |
| 7 | 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20of trap / granite /quartzite/ gneiss metal for R.C.C. beams andlintels as per detailed designs and drawings or as directed including\nsteel centering, formwork, cover blocks, laying /pumping,compactionand roughening the surface if special finish is to beprovided and curing etc. complete. (Excluding reinforcement and\nstructural steel). with fully automatic micro processor based PLCwith SCADA enabled reversible Drum Type mixer/ concrete Batch\nmix plant (Pan mixer) etc. complete. With fine aggregate (NaturalSand / Crushed sand VSI Grade finely washed etc) (SSR IT No.25.50 P.No. 225) | 9.11 | Cum | |
| 8 | 8 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. | 4.55 | Cum | |
| 9 | 9 | Providing second class Burnt Brick masonry with conventional/ I.S.type bricks in cement mortar 1:6 in superstructure including strikingjoints, raking out joints, watering and scaffolding etc. Complete (SSR IT No.27.05 P.No. 246) | 36.43 | Cum | |
| 10 | 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-15of trap/ granite/quartzite/gneiss metal for coping to plinth orparapet, moulded or chamfered as per drawing or as directed\nincluding steel centering, plywood/ steel formwork compacting,roughening them if special finish is to be provided, finishing unevenand honeycombed surface and curing etc. complete. The Cement\nMortar 1:3 plaster is considered for rendering uneven andhoneycombed surface only. Newly laid concrete shall be covered bygunny bag, plastic, tarpaulin etc. (Wooden centering will not be\nallowed.) With fine aggregate (Natural Sand / Crushed sand VSIGrade finely washed etc) (SSR IT No.24.16 P.No. 221) | 6.04 | Cum | |
| 11 | 11 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete | 267.84 | sqm | |
| 12 | 12 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. | 267.84 | sqm | |
| 13 | 13 | Providing and fixing in position TMT - FE - 500 bar reinforcement ofvarious diameters for R.C.C. pile caps, footings, foundations, slabs,beams columns, canopies, staircase, newels, chajjas, lintels pardis,\ncopings, fins, arches etc. as per detailed designs, drawings andschedules. including cutting, bending, hooking the bars, binding withwires or tack welding and supporting as required complete. (SSR IT No.26.33 P.No. 236) | 2.287 | MT | |
| 14 | 14 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. | 534.68 | sqm | |
| 15 | 15 | Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and R.C.C beams or Column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete. | 50 | rmt | |
| 16 | 16 | Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. | 50 | rmt | |
| 17 | 17 | Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg/Smt. | 4.5 | sqm | |
| 18 | 18 | Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. | 10 | rmt | |
| 19 | 19 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. | 111.99 | Cum | |
| 20 | 20 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge | 1 | nos |
AI Tender Summary
Tender Timeline
Dec 23, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedJan 06, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 07, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender