| 1 | 1 | Earth work in excavation in foundation trenches in all sorts of soil (including mixed soil but excluding late rite and sand stone) including removing spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling dressing and ramming the bottom, bailing out water as required complete.\n(a) Depth of excavation not exceeding 1500 mm. | BI01010001010000000000000515BI0100001138 | 22.373 | CuM |
|---|
| 2 | 2 | Earth work in filling in foundation trenches or plinth with earth. in layer not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (payment to be on basis of measurement of finished quantity of work.)\n(a) with earth obtainedfrom excavation of foundation | BI01010001010000000000000515BI0100001139 | 10.341 | CuM |
|---|
| 3 | 3 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to Proper level and filling joints with local sand. | BI01010001010000000000000515BI0100001140 | 61.301 | SqM |
|---|
| 4 | 4 | Cement Concrete (1:3:6) with graded stone (30 mm size) excluding shuttering\nIn ground floor and foundation.\n(a) 1:3:6 proportion | BI01010001010000000000000515BI0100001141 | 4.598 | CuM |
|---|
| 5 | 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.\nIn Ground Floor :\nii) River Bazree | BI01010001010000000000000515BI0100001142 | 17.926 | CuM |
|---|
| 6 | 6 | Reinforcement for Reinforced Concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. Including supplies of rods , initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.\nFor works in foundation, basement and upto roof of ground floor/upto 4 m. \nTor Steel/Mild Steel\nI. TATA TISCON/ SAIL…. | BI01010001010000000000000515BI0100001143 | 1.759 | MT |
|---|
| 7 | 7 | Hire and labour for shuttering with centering and necessary staging upto 4 m using approved stout and thick hard wood planks ……………. Fitting, fixing & striking out after completion of works (upto roof of groung floor)\n25 mm to 30 mm shuttering without staging in foundation.\nb) With out staging in foundation and plinth. | BI01010001010000000000000515BI0100001144 | 49.68 | SqM |
|---|
| 8 | 7.1 | a) For Superstructure with staging. | BI01010001010000000000000515BI0100001145 | 126.77 | SqM |
|---|
| 9 | 8 | Brick work with 1st class bricks in cement mortar (1:4) in ground floor. In foundation & plinth | BI01010001010000000000000515BI0100001146 | 3.268 | SqM |
|---|
| 10 | 9 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification…. | BI01010001010000000000000515BI0100001147 | 5.988 | SqM |
|---|
| 11 | 10 | 125 mm th. brick work with 1st class bricks in cement mortar (1:4) in ground floor.\nIn Ground Floor : | BI01010001010000000000000515BI0100001148 | 87.559 | SqM |
|---|
| 12 | 11 | Plaster (to wall, floor, celling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]\nIn Ground Floor :\n(ii) With 1:4 cement morter\na) 20 mm thick plaster | BI01010001010000000000000515BI0100001149 | 96.828 | SqM |
|---|
| 13 | 11.1 | ii) With 1:4 cement morter\nb) 15 mm thick plaster | BI01010001010000000000000515BI0100001150 | 181.547 | SqM |
|---|
| 14 | 11.2 | ii) With 1:4 cement morter\nc) 15 mm thick plaster | BI01010001010000000000000515BI0100001151 | 150 | SqM |
|---|
| 15 | 12 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.\n(A) Floor\nWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.\nb) Area of each tile above 0.09 Sq.m\n(i) Coloured decorative | BI01010001010000000000000515BI0100001152 | 31.993 | SqM |
|---|
| 16 | 12.1 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.\n(B) Wall\nWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m Coloured decorative | BI01010001010000000000000515BI0100001153 | 58.05 | SqM |
|---|
| 17 | 13 | Neat cement punning about 1.50 mm. th. in wall, dado, window, sills, floor, drain etc. | BI01010001010000000000000515BI0100001154 | 12.33 | SqM |
|---|
| 18 | 14 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction protecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc. including hoisting in position, straightening if required, fixing lugs locking bracket, handle plate etc, including hosting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cuttings holes and mending good damages to match with existing surface complete in all respect excluding glazing.\nIn Ground Floor :\nFlash butt welded windows and ventilators\n(No shop priming will be allowed to facilate inspecation of workmanship)\nb) Openable steel windows as per IS sizes with side hung shutters and horizontal glazing bars with/without fixed type ventilators. | BI01010001010000000000000515BI0100001155 | 5.49 | SqM |
|---|
| 19 | 14.1 | (C) Extra over this item :\n(VIII) MS integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with MS flats and bars. | BI01010001010000000000000515BI0100001156 | 17.28 | Kg |
|---|
| 20 | 15 | Supplying 1.5 mm thick MS sheet fitted & fixed on one or both faces of MS / WI gate etc with point weilding at not more than 150 mm apart complite….. Materials. | BI01010001010000000000000515BI0100001157 | 5.49 | SqM |
|---|
| 21 | 16 | Supplying Fitting & fixing Factory made Pre - laminated P.V.C. door frame of size 50 mm. X 47 mm with a wall thickness of 5 mm. made out of extruded 5 mm. Pre - laminated P.V.C sheet cut at two corners and joined with two No. of 1.5 mm. long brackets of 15 mm X 15 mm. M.S. Square tube. The two vertical door profiles are to be re inforced with 19 mm X 19 mm. M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65 / 100 mm M.S Screws through the frame by using P.V.C. fasteners. A minimum of 4 Nos. of screws to be provided for each vertical members and minimum 2 Nos for horizontal members etc. complete as per Manufacturer's specification and direction of the Engineer - in - Charge. | BI01010001010000000000000515BI0100001158 | 19.8 | M |
|---|
| 22 | 17 | Supplying,Fitting & Fixing 30 mm thick both side pre laminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S.tubes of 19 gauge thickness and size 19 mm x 19 mm for styles, top and bottom rails, M.S. frame shall have cost of stee lprimers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flatand 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th .95 mm wide PVC sheet out of which 75 mm shall be flatand 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5mm x 2) th., 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded / sealed to the styles &rails with 7 mm (5mm + 2mm) th . x 15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. Anadditional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the \"C\" channel using PVC solvent adhesive etc. complete excluding all necessary hardwires as per direction of Engineer - in - Charge. | BI01010001010000000000000515BI0100001159 | 6.3 | SqM |
|---|
| 23 | 18 | (b) Priming one coat on steel or metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001160 | 5.49 | SqM |
|---|
| 24 | 18.1 | (a).Priming one coat on timber or plastered surface with synthetic oil bound prinmer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001161 | 12.33 | SqM |
|---|
| 25 | 19 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surfaces by sand papering etc. including using of approved putty etc. on the surface, if necessary.\nA) On Timber or Plastered surface iv) Two coats | BI01010001010000000000000515BI0100001162 | 12.33 | SqM |
|---|
| 26 | 19.1 | On steel or other metal surface : iv) Two coats\nWith super gloss (hi-gloss) | BI01010001010000000000000515BI0100001163 | 5.49 | SqM |
|---|
| 27 | 20 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coat.\n(i) Internal surface : (b) Two coat. (i) Other then Yellow & Pink. | BI01010001010000000000000515BI0100001164 | 146.58 | SqM |
|---|
| 28 | 21 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, abour, scaffolding and all incidental charges but excluding the cost of primer.\nIn Ground floor (Two Coat)\na) Normal Acrylic Emulsion | BI01010001010000000000000515BI0100001165 | 113.21 | SqM |
|---|
| 29 | 22 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560with dia. RCC manhole cover (heavy type) of approved make3 supplied, fitted and fixed in the 100mm thick RCC(1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4:1) with neat cement finish to the internal surfaces and 15mm thick cement plaster (4:1) to outside wall upto 200 mm. below G.L. floor finished with 25 mm. thick grey artificial stone over 100 mm thick R.C.C. (1:1.5:3) bottom slab including supplying fitting and fixing all necessary specials, fittings S.W. tees. C. I foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and filling the sides of the tanks with earth removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @0.5% by weight of cement with all costs of labour and materials.\n (i) For 20 users. B) With River Bazree | BI01010001010000000000000515BI0100001166 | 1 | Each |
|---|
| 30 | 23 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6metre from the bottom having 150mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 meter from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6mm thick cement plaster (1:4) on top of the RCC cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including RCCcover slab of 100 mm. thick with cement conc( 1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm. dia RCC manhole cover (heavy duty) of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making necessary arrangements for pipe connections, excavation of well including shoring dewatering and removing the excess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250mm thick dry brick work and 250 mm thick cement brick work (6:1) and 1.00 m inside dia. | BI01010001010000000000000515BI0100001167 | 1 | Each |
|---|
| 31 | 24 | Painting block letters or digits in Black Japan or any approved paint as per direction. | BI01010001010000000000000515BI0100001168 | 100 | Each |
|---|
| 32 | 25 | Sanitary and Plumbing Works (L.S.)\n(Payment will be made as per PWD (S&P) Schedule of Rates. | BI01010001010000000000000515BI0100001169 | 1 | LS |
|---|
| 33 | 26 | GST 12% | | 1 | Nos |
|---|
| 34 | 27 | W.W. CESS 1% | | 1 | Nos |
|---|
