| 1 | 1 | Supply and Installation of Solar Panel incuding module stand (250 Watt/ 12V and above with 10 year warranty.Module stand with MS hot dip galvanized to minimum of 16 microns zinc coating thicknes tilted to 13-15 degrees) | BI01010001010000000000000515BI0100001113 | 2 | Nos |
|---|
| 2 | 2 | Supply and installation of battery (Tubular))150AH/12V C10 battery with 5 year warranty) | BI01010001010000000000000515BI0100001114 | 2 | Nos |
|---|
| 3 | 3 | Energiser (Energiser with 10KVA output Safety Standards to be followed are BIS 302-2-76 IEC335-2-76. Switch-high, medium and low power setting. Solar panel option to recharge 12 V battery. Full and reduced power output terminals to operate -different fences independently | | 2 | Nos |
|---|
| 4 | 4 | Charge Control Unit Maximum Power point tracking charge control unit with 12x48 Volt battery auto sensing 40A charging current | | 2 | Nos |
|---|
| 5 | 5 | Lead Out Cable (Must be double insulated\nwithstanding 15 KV voltages and inner core wire must be hot dip galvanized.) | | 40 | Mtr |
|---|
| 6 | 6 | Supply and fixing Corner Post assembly - including cost of GI-pipe, cutting, welding, Painting and fixing. (8 ft., GI-2\",14 guage Thickness,50NB Class ‘B’ pipe-Hot dip galvanized to more than 60 microns. Must include fasteners. | | 45 | Nos |
|---|
| 7 | 7 | Supply and installation of Supporting post including cost of GI Pipe, cutting welding and fixing (8 ft., GI-2\",14 guage Thickness,50NB Class ‘B’ pipe-Hot dip galvanized to more than 60 microns. Must include fasteners. | | 45 | Nos |
|---|
| 8 | 8 | Live Intermedate Post - including cost of T-angle, cutting, welding charges (8 ft., (25mmx25mmx3mm) T post or 16mm TMT rod hot dip galvanized more than 60 microns, bottom insulated to energize the entire post.) | | 175 | Nos |
|---|
| 9 | 9 | Super Strain Insulator (Must of poly polypropylene plstic rated for 15KV UV stabilized.) | | 300 | Nos |
|---|
| 10 | 10 | PP Reel Insulator (Must be of virgin plastic material. Polypropylene or equivalent.) | | 1000 | Nos |
|---|
| 11 | 11 | Joint Clamps (Spring steel capable of taking compression loads. Galvanized) | | 60 | Nos |
|---|
| 12 | 12 | Tension Spring (15 cm length, Withstand 400 Kg) | | 25 | Nos |
|---|
| 13 | 13 | Wire Tightener ( should be made from Al-alloy non-rusting\nquality mechanical strength 500 N) | | 80 | Nos |
|---|
| 14 | 14 | Gate Set (Gate.Steel rope with handle and spring assembly. Handle made of polyethylene) | | 5 | Nos |
|---|
| 15 | 15 | Earth Device (Steel Rod with Earthing mixture (1.5\" pipe) -6 ft. length.Must contain earth mixture capable of retaining , moisture and 8 mm dia copper plated IS-3043 rod non rusting quality with earthing compound 10kg/km) | | 4 | Nos |
|---|
| 16 | 16 | Supply of 12Gauge ACSR wire (12 guage, 2.5 mm. wire dia High tensile wire with minimum of 230-300 gms./sq.m zinc coated thickness. UTS 140.5kg/mm2, Break strength of 740 kgs. Zn purity above 99%.) | | 600 | Kg |
|---|
| 17 | 17 | Supply of C clamp (60 micron thick) | | 80 | Nos |
|---|
| 18 | 18 | 14 Gauge Wire (High quality zic coating wire for binding insulators) | | 25 | Kg |
|---|
| 19 | 19 | Warning Sign Board (Polyethylene plastic with satutarory warning with signs.) | | 7 | Nos |
|---|
| 20 | 20 | Tool Kit (Wire tighting handle,twisting tool, pilers, double handed spanner ) | | 2 | Nos |
|---|
| 21 | 21 | Base unit box with stand 18 gauge thickness steel box (lockable) painted GI Sheet, painted and fixed on 100 NB class and should be capable of housing battery and energizer | | 2 | Nos |
|---|
| 22 | 22 | Digital Volt Meter must display fence volatage digitally upto 12 KV only. Made of no shocking plastic | | 1 | Nos |
|---|
| 23 | 23 | Installation charge including digging pits, fixing post, and installation of lines (1 km x 5 lines x Rs. 3.5/m) | BI01010001010000000000000515BI0100001126 | 10000 | mtr |
|---|
| 24 | 24 | Clearing boundary line to a width of 2 M wide fencing boundary (As per FSR Item 100a(2) 18.532 mm including VDA @171.60) (3000x2) | BI01010001010000000000000515BI0100001127 | 0.4 | LS |
|---|
| 25 | 25 | PCC 1:2:4 30x30x30 cm using graded stone aggregate 20mm for corner and supporting post DSR item 4:1:3 | BI01010001010000000000000515BI0100001128 | 2.43 | M3 |
|---|
| 26 | 26 | Contract Profit and overhead charge 15% only for the labour involved ie for the items No. 23 & 24 | BI01010001010000000000000515BI0100001129 | 1 | LS |
|---|
| 27 | 27 | Quality Testing Fees | | 1 | LS |
|---|
