Medical Education Department has published Supplying And Installation Of 1000 Kvatransformer Including 200 Kvar Apfc Panel Lt Kiosk,Supplying. Submission Date for this Tender is 02-01-2020. Forming Tools Tenders in Karnataka. Bidders can get complete Tender details and download the document.
Sl No | Item Code | Item Name | Item Description | Unit | Quantity |
---|---|---|---|---|---|
1 | TRANSF01 | Supply, installation, testing and commissioning of 1000 kVA , 5 star rated copper wound Distribution Transformer 1111kV/433V, 3 phase, 50 Hz, with Off load Tap switch , Buchhltz relay winding , Temperature indicator , oil Temperature indicator , marshalling box with wiring , oil Level indicator with +5% to -10% steps of 2.5 % , HT and LT cable entry Box type , stacked core with Oil as per IS:1180( Part-1) 2014 with all standard accessories as per latest standard NO:2026/1977 and IS:335 technical specifications & ESCOM approved Rating and Diagram Plate, Earthing Terminals - 2 Nos,Liffting Lugs,Air release hole with plug,Dehydrating Silica Gel Breather,Prismatic Oil level Guage,Oil Conservator with drain plug,Thermometer pocket,Jacking Lugs,Bottom drain cum filter valve,Top filter valve, Pressure relief device,Marshalling Box [wherever applicable],100 mm OTI/ 150 mm OTI with alarm & trip,WTI with alarm and trip,Buchholz Relay with alarm and trip,Shut off valves for Buchholz Relay,Magnetic Oil Level guage,Radiators - Fixed / Detachable With HT & LT Cable end boxes / Provison for LV Bus Duct type, All routing test as per IS shall be conducted on the transformer. The Transformer Enclosure shall have suitably designed Louvers for Air Circulation & efficient Cooling, required Danger boards, signages, lettering etc.. The enclosure shall be Epoxy Powder coated. The transformer shall be subjected to all routine tests as per IS/IEC standards. Type test certificate shall be submitted ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. Pg 85 item 15.7 (including all necessary commissiong approvals to be obtained by the Bidder ) 15.7 .16 1000 KVA – copper Wound 5 star rated | Specification: As per tender Document | Nos | 1 |
2 | TRANSF02 | Supplying fixing and wiring earth electrode for grounding of lifts transformers DG sets etc using 40mm dia 29mm thick 25 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber The connection from the electrode is to be established through GI strip using GI bolts and nuts55/72 ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work pg 40 item 6.2 | Specification: As per tender Document | Nos | 10 |
3 | TRANSF03 | Installing & fixing 1000 KVA transformer on the existing concrete plinth ( This does not include the cost of plinth, cable duct, laying & termination of cable etc.. provision shall be made ) P-87 , CDS-41 , sl no:2 as per ESCOM SR 2018-2019 | Specification: As per tender Document | Each | 1 |
4 | TRANSF04 | Supplying and running of GI/ copper strips for grounding connections using necessary fixing materials as required pg 40 item 6.3 6.3.4 50x6 mm GI strip | Specification: As per tender Document | Mtr | 40 |
5 | TRANSF05 | Supplying and running of GI/ copper strips for grounding connections using necessary fixing materials as required pg 40 item 6.3 6.3.9 50x6 mm copper strip | Specification: As per tender Document | Mtr | 60 |
6 | TRANSF06 | Supplying and running of GI/ copper strips for grounding connections using necessary fixing materials as required pg 40 item 6.3 6.3.10 600x600 x 3mm copper plate | Specification: As per tender Document | Each | 8 |
7 | TRANSF07 | Supplying and fixing of 4 pole manual operated 800 AMPS Air circuit Breaker 4 pole | Specification: As per tender Document | Nos | 1 |
8 | TRANSF08 | Supplying of 1.1 KV LT UG cable XLPE or heat resistant PVC insulated , PVC extruded inner sheath armoured UG LT cable as per IS-1554 ( part-1) or IS-7098 part-1 , Armouring strip thickness in average +5% and resistivity 14 ohms/KMS ( Max) as per IS-3975 Pg 40 item 6.4 6.4.14 3.5 core 300 sqmm | Specification: As per tender Document | Mtr | 70 |
9 | TRANSF09 | Digging of tetench of 0.6 mtr deep x0.50 mtr wide Refilling the trench to the required ground level and consolidating etc.. complete pg 41 item 6.6 6.6.3 C C cutting | Specification: As per tender Document | Mtr | 50 |
10 | TRANSF10 | Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all round the cable pg 41 item 6.7 | Specification: As per tender Document | Mtr | 40 |
11 | TRANSF11 | Supplying and fixing of class A ( Medium duty ) GI pipe of wall thickness not less than 3.25 mm on pole / wall/ drain crossing with necessary clamping arrangements for UG cable of 1.1 KV Pg 41 & 42 item 6.9 6.9.5 100 mm | Specification: As per tender Document | Mtr | 20 |
12 | TRANSF12 | Supplying and fixing of heavy duty cable gland s suitable for UG cable of 1.1 KV class ( metal only) Pg 42 item 6.11 6.11.1 19/20 mm dia | Specification: As per tender Document | Nos | 2 |
13 | TRANSF13 | Supplying and fixing of heavy duty cable gland s suitable for UG cable of 1.1 KV class ( metal only) Pg 42 item 6.11 6.11.7 75mm dia | Specification: As per tender Document | Nos | 10 |
14 | TRANSF14 | Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape , wire armoured alluminium conductor 4 core cable of 1.1 KV grade of the following sizes pg 42 item 6.12 6.12.7 3 1/2 x185/ 225 sqmm | Specification: As per tender Document | Per Kit | 3 |
15 | TRANSF15 | Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape , wire armoured alluminium conductor 4 core cable of 1.1 KV grade of the following sizes pg 42 item 6.12 6.12.8 3 1/2 x 240 sqmm | Specification: As per tender Document | Per Kit | 2 |
16 | TRANSF16 | Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape , wire armoured alluminium conductor 4 core cable of 1.1 KV grade of the following sizes pg 42 & 43 item 6.12 6.12.9 3 1/2 x 300 sqmm | Specification: As per tender Document | Per Kit | 1 |
17 | TRANSF17 | Heat shrinkable indoor Type cable Termination kit for XLPE cable as per ESCOM SR 2018-2019 | Specification: As per tender Document | Set | 2 |
18 | TRANSF18 | Making and fixing pot head for HT cable only heat shrinkable type as per ESCOM SR 2018-2019 | Specification: As per tender Document | Set | 2 |
19 | TRANSF19 | HT cable : supplying and Laying of high Tension 11 KV cable , dry curing & Dry cooling with true triple extrusion simultaneously through a single common head , 3 core under ground XLPE(E) cable having stranded compact circular aluminium conductor , screened insulated , insulation screened with extruded semiconducting compound in combination with copper tape , core laid up extruded inner sheathed of GI flat strip armoured and overlall PVC sheathed with specified IS 7098/11/85 with latest amendments Pg 83 item 15.3 15.3.4 3 Core x185sqmm | Specification: As per tender Document | Mtr | 20 |
20 | TRANSF20 | Supplying tinned copper Lugs and crimping and wiring to terminal point for wire of the following sizes Pg 43 item 6.17 6.17.12 120 sqmm Long barrel | Specification: As per tender Document | Nos | 10 |
21 | TRANSF21 | Supplying tinned copper Lugs and crimping and wiring to terminal point for wire of the following sizes Pg 43 item 6.17 6.17.13 150 sqmm Long | Specification: As per tender Document | Nos | 10 |
22 | TRANSF22 | Supplying tinned copper Lugs and crimping and wiring to terminal point for wire of the following sizes Pg 43 item 6.17 6.17.14 185 sqmm Long barrel | Specification: As per tender Document | Nos | 16 |
23 | TRANSF23 | Supplying tinned copper Lugs and crimping and wiring to terminal point for wire of the following sizes Pg 43 item 6.17 6.17.14 240 sqmm Long barrel | Specification: As per tender Document | Nos | 10 |
24 | TRANSF24 | Supplying tinned copper Lugs and crimping and wiring to terminal point for wire of the following sizes Pg 43 item 6.17 6.17.15 300 sqmm Long barrel | Specification: As per tender Document | Nos | 30 |
25 | TRANSF25 | Supplying tinned copper Lugs and crimping and wiring to terminal point for wire of the following sizes Pg 43 item 6.17 6.17.16 400 sqmm Long barrel | Specification: As per tender Document | Nos | 18 |
26 | TRANSF26 | Supplying , fixing and wiring heavy duty low voltage capacitors conforming to IS 2834, 3phase , 400/440 volts grade , for power factor improvement Pg 29 item 5.37 | Specification: As per tender Document | Per KVAR | 100 |
27 | TRANSF27 | Supplying of switch disconnector fuse unit (TPN) HRC type ( but witout HRC fuses) with AC-23 A DUTY AND AS PER is- 13947 PG 25 ITEM 5.8 5.8.1 63Amps | Specification: As per tender Document | Each | 12 |
28 | TRANSF28 | Supplying and fixing HRC fuse link on existing switch fuse with watt loss as per IS-13703 pg 25 item 5.10 5.10.1 up to 63 Amps | Specification: As per tender Document | Each | 24 |
29 | TRANSF29 | Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three place LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect / disconnect banks, with automatic recognition or with standard programs. ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. Pg 30 item 5.39 | Specification: As per tender Document | Each | 2 |
30 | TRANSF30 | Supplying of multi function digital meter with three lines back light LCD type display for voltage, current , frequency , power, power factor KVA,KWH, KVAR suitable for 3 phase 4 wire LT network with IP 54 degree of protection and completely wired as required with with communication port and class 0.5s accuracy pg 29 item 5.33 | Specification: As per tender Document | Each | 2 |
31 | TRANSF31 | Supplying , fixing and wiring 1000/5A to 1600/5A 15 VA Burden class 1 current Transformer Pg 29 item 5.36 | Specification: As per tender Document | Each | 3 |
32 | TRANSF32 | Supplying and fixing of LED type panel board indicating Lamps with required colour suitable for 230 Volts /440 Volts AC 50 HZ 12/24 Volt DC pg 29 item 5.38 | Specification: As per tender Document | Each | 18 |
33 | TRANSF33 | Supplying ..1000 Amps. amps rated 3phase with neutral bus bar using required capacity electrolytic Alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. - 1000Amps double run of 60x10mm per phase and single run of 60x10mm for neutral ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. Pg 30 item 5.40 5.40.5 1000 Amps double run of 4x60x10mm per phase and single run of 60 x10mm for neutral | Specification: As per tender Document | Mtr | 16 |
34 | TRANSF34 | Supplying ..1000 Amps. amps rated 3phase with neutral bus bar using required capacity electrolytic Alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. - 1000Amps double run of 60x10mm per phase and single run of 60x10mm for neutral ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. Pg 30 item 5.40 5.40.3 400 Amps 4x50x10mm Alluminium strips | Specification: As per tender Document | Mtr | 8 |
35 | TRANSF35 | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. - 50x50x6mm ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. Pg 30 item 5.41.5 5.41.4 50x100x50x6mm | Specification: As per tender Document | Mtr | 10 |
36 | TRANSF36 | Supplying and fixing Moulded case circuit Breakers (MCCB) over existing wood/panel board using necessary screws, bolts, nuts and wiring complete , protection of overload and short circuit with thermal Magnetic/Micro processor release and Earth fault as per (IS -13947 Pg 26 & 27 item 5.14 Four Pole 5.14.12 400 Amps 50 KA | Specification: As per tender Document | Each | 3 |
37 | TRANSF37 | Supplying and fixing Moulded case circuit Breakers (MCCB) over existing wood/panel board using necessary screws, bolts, nuts and wiring complete , protection of overload and short circuit with thermal Magnetic/Micro processor release and Earth fault as per (IS -13947 Pg 46 item 6.3 5.14.14 500-630 Amps 50 KA | Specification: As per tender Document | Each | 2 |
38 | TRANSF38 | Supplying and fixing of 200 KVAR APFC panel including 800 Amps ACB , capacitors, MCB,s contactors ,selector switch for manual/ Auto mode / operation, selector switch for voltage/ current and Auto matic power factor controller relay, complete wiring and to be fabricated with 14 SWG MS sheet as out door door panel confirming to IS and supplying and drawing 300 sqmm cable from the LT panel and controlling cable, etc..( market Rates) | Specification: As per tender Document | Each | 1 |
39 | TRANSF39 | Fabricating supplying and mounting MS Box made out 14… SWG suitable for floor/wall mounting , fully weather proof with provision for better heat dissipation , provided with hinged front cover , equipped with tamper proof locking arrangements , with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc.. complete Pg 30 item 5.42, 5.42.1 14 SWG | Specification: As per tender Document | sq.cms | 230000 |
40 | TRANSF40 | Providing repairs and welding with MS sheet 2mm to the existing LT Kiosks alredy installed at the sunstation and providing Two coats of painting to match with the existing color | Specification: As per tender Document | L/S | 2 |
41 | TRANSF41 | Providing settings for RMU panel including CT,s etc | Specification: As per tender Document | L/S | 1 |
42 | TRANSF42 | KSRB 2-1.1 : earth work in surface excavation in ordinary soil for leveling and lowering the ground manually( other than foundation of building , culverts road drains and trenches of pipe lines and cables and removing the excavated surface leveled and neatly dressed , disposed earth to be leveled including braking of clods and neatly dressed as per specifications ( PWP & IWTD, Bangalore circle civil Sr 2018-2019 2.3/ P6 | Specification: As per tender Document | Cmtr | 7.8 |
43 | TRANSF43 | KSRB4-1.2: Providing and laying in position plain cement concrete of mix M-15 (1:2:4) with OPC cement @ 240 Kgs with 20mm down size graded granite metal coarse aggregates @0.69 cum and fine aggregates @ 0.459 cum , machine mixed , concrete laid in Layers not exceeding 15 cms thick well compacted in foundation, plinth , including cost all materials labour HOM of machinery, curing complete as per specifications . Specification No: KBS 4,1, 4,2 ( PWP &IWRD bangalore circle SR 2018-2019 4.6/P13 | Specification: As per tender Document | Cum | 6.4 |
44 | TRANSF44 | KSRB5.2-3 : providing and constructing granite / trap basalt size stone masonry in foundation with cement morter 1:6 , stone hammered dressed in courses not less than 20 cms high, bond stones at two mtr apart in each course including cost of materials , labour , curing complete as per specifications . Specification No:KBS 5.2-3 ( PWP & IWTD , Bangalore circle SR2018-2019 5.6/P25 | Specification: As per tender Document | Cum | 2.7 |
45 | TRANSF45 | Lettering the RMU with enamel paint and also wiring single line diagram of each panel, caution board, Danger Board etc.. including cost of paint and Brush etc.. escom SR 2018-2019 | Specification: As per tender Document | Per Panel | 6 |
46 | TRANSF46 | Buy back offer price for old 500 KVA Transformer: The Tenderer shall quote the rates for offering price for old 500 kVA transformer including labour and transportation charges and GST | Specification: As per tender Document | Nos | 1 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail