Retender3 - Kstp Ii- Strengthening Trauma Care Services On Safe Corridor Demonstration Project- Construction Of Trauma Care Icu At Taluk Head Quarters Hospital , Kottarakkara
Tender Value
13.92 Lakhs
Estimated cost
Bid Submission
01 Jan 2020
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2830
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kollam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Retender3 - Kstp Ii- Strengthening Trauma Care Services On Safe Corridor Demonstration Project- Construction Of Trauma Care Icu At Taluk Head Quarters Hospital , Kottarakkara
BOQ
| Name of Work:RETENDER3-KSTP II : STRENGTHENING TRAUMA CARE SERVICES ON SAFE CORRIDOR DEMONSTRATION PROJECT- CONSTRUCTION OF TRAUMA CARE ICU AT TALUK HEAD QUARTERS HOSPITAL,KOTTARAKKARA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Trauma surgical ICU | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | 21.5 Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | BI01010001010000000000000515BI0100001113 | 338.65 | Kg |
| 3 | 1.02 | 21.6 Providing and fixing 6 mm dia. G I level adjusting hangers ( upto 1200 mm length), fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-Charge. | 100 | no | |
| 4 | 1.03 | 50.12.4.2 Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 188.14 | sqm | |
| 5 | 1.04 | 21.1.1.2 For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) | 187.28 | kg | |
| 6 | 1.05 | 21.1.2.2 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) | 90.36 | kg | |
| 7 | 1.06 | 21.2.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge. Prelaminated particle board with decorative lamination on both sides | 27.9 | sqm | |
| 8 | 1.07 | 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness | 20.25 | sqm | |
| 9 | 1.08 | od12473/2019_2020 null Providing and fixing aluminium door handles: Anodised Aluminium handles 100 mm with plate 150 x 32 mm | 2 | no | |
| 10 | 1.09 | 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | 1 | no | |
| 11 | 1.1 | od12515/2019_2020 null ICU Curtain Partition :-Providing and Fixing: Curtain made out of high quality synthetic washable, stain free cloth of Size L 2025mmxW 1300mm. With Hooks & wheels per curtain nos. & standard Colors having partly Net on upper side.Curtain Track of aluminum alloys End caps, supporting brackets, Roller, Rings, Curtain, ceiling support. | 113.7 | sqm | |
| 12 | 1.11 | 10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable\narrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | BI01010001010000000000000515BI0100001114 | 25 | kg |
| 13 | 1.12 | 13.82.1 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour. One coat | BI01010001010000000000000515BI0100001115 | 95.28 | sqm |
| 14 | 1.13 | 9.12 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. ( Area of opening for glass panes excluding portion inside rebate shall be measured). | BI01010001010000000000000515BI0100001116 | 20.25 | sqm |
| 15 | 1.14 | 21.19.1 Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 Upto 5 mm depth and 5 mm width | BI01010001010000000000000515BI0100001117 | 26 | metre |
| 16 | 2 | Manifold Room | BI01010001010000000000000515BI0100001118 | ||
| 17 | 2.01 | od18306/2019_2020 null Dismantling interlock & cleaning and stacking the materials as directed with in a lead of 50 m | BI01010001010000000000000515BI0100001119 | 54 | sqm |
| 18 | 2.02 | od18307/2019_2020 null Scavenger (bhisti) engaging for cleaning the drainage | 8 | no | |
| 19 | 2.03 | 2.33.1 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyound 30 cm girth up to and including 60 cm girth | 31 | no | |
| 20 | 2.04 | 2.33.2 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyound 60 cm girth up to and including 120 cm girth | 13 | no | |
| 21 | 2.05 | 19.7.2.1 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg): With common burnt clay F.P.S ( non modular) bricks of class designation 7.5 | 2 | no | |
| 22 | 2.06 | 50.18.9.9.2 Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 | 25 | metre | |
| 23 | 2.07 | 50.18.9.19.2 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall | 6 | metre | |
| 24 | 2.08 | 50.18.9.22.1 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow | 5 | no | |
| 25 | 2.09 | 50.18.9.22.4 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend | 5 | no | |
| 26 | 2.1 | 50.18.9.22.5 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee | 4 | no | |
| 27 | 2.11 | 50.18.9.22.6 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,\nincluding jointing with PVC solvent cement - 110x110x110 mm dia Door tee | 3 | no | |
| 28 | 2.12 | 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil | 15.78 | cum | |
| 29 | 2.13 | 4.1.2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) | 4.53 | cum | |
| 30 | 2.14 | 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | 5.88 | cum | |
| 31 | 2.15 | 4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns | 10.56 | sqm | |
| 32 | 2.16 | 5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | 2.61 | cum | |
| 33 | 2.17 | 5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more | 261 | kilogram | |
| 34 | 2.18 | 5.9.5 Centering and shuttering including strutting, etc. and removal of form for: Lintels, beams, plinth beams, girders bressumers and cantilevers | 4.35 | sqm | |
| 35 | 2.19 | 7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand) | 13.92 | cum | |
| 36 | 2.2 | 50.6.2.2 Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 9.14 | cum | |
| 37 | 2.21 | 13.1.1 12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand) | 269.7 | sqm | |
| 38 | 2.22 | 13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm | 269.7 | sqm | |
| 39 | 2.23 | 10.5.1 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces | 3.15 | sqm | |
| 40 | 2.24 | 15.17.2 Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in: Channels, angles, tees and flats | 200 | kg | |
| 41 | 2.25 | 15.28.1 Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of : G.S. Sheet | 35 | sqm | |
| 42 | 2.26 | 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | 413.2 | kg | |
| 43 | 2.27 | od19329/2019_2020 null Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | 200 | kg | |
| 44 | 2.28 | od19328/2019_2020 null Providing and fixing precoated aluzinc sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.30 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and\nshould be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001120 | 15.3 | sqm |
| 45 | 2.29 | od18941/2019_2020 null Providing and fixing precoated aluzinc sheets (department material ) The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | BI01010001010000000000000515BI0100001121 | 20.8 | sqm |
| 46 | 2.3 | 50.12.2.1 Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where\never required. | BI01010001010000000000000515BI0100001122 | 26.52 | sqm |
| 47 | 2.31 | 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work | BI01010001010000000000000515BI0100001123 | 41.89 | sqm |
AI Tender Summary
Tender Timeline
Dec 21, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedJan 01, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 01, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender