Construction Of Additional 2 Storied Rcc Barrack For 100 Inmates Civil Works Etc At District Jail , Tinsukia District
Tender Value
80.61 Lakhs
Estimated cost
Bid Submission
03 Jan 2020
0 days left
EMD
1.61 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
District Jail, Tinsukia District → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Additional 2 Storied Rcc Barrack For 100 Inmates Civil Works Etc At District Jail , Tinsukia District
BOQ
| Name of Work: Construction of Additional 2(Two) Storied RCC Barrack for 100 inmates - Civil works, Sanitary, water Supply, Site preparation etc. at District Jail, Tinsukia District | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL WORK:- Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | 404.6 | Sqm | |
| 2 | 2 | Earth work in excavation for foundation trences of walls, retaining walls, footing of columns, steps, septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2m below the existing ground level. (a) In ordinary soil. | 405.64 | Cum | |
| 3 | 3 | (B) Extra over item No. 1.1 (A) above for each 1 m depth or part thereof beyond the initial depth of 2 m. | 25 | Cum | |
| 4 | 4 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering where necessary shall be measured and paid separately). (a) In prop. 1 cement: 3 sand: 6 coarse aggregate by volume. | 33 | Cum | |
| 5 | 5 | (b) In prop. 1 cement: 4 sand: 8 coarse aggregate by volume. | 18 | Cum | |
| 6 | 6 | Providing and laying 25mm thick damp proof coarse with cement concrete in prop. 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | 70 | Sqm | |
| 7 | 7 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 105 | Cum | |
| 8 | 8 | (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 | 130 | Cum | |
| 9 | 9 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforced concrete and plain concrete work. (A) In sub structure upto plinth level: Foundation, footing, columns with base, tie and plinth beam, pile cape, base slab, retaining walls, walls of septic tank, inspection pit and the like upto plinth level. (i) using 25mm thick plank. | 80 | Sqm | |
| 10 | 10 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M b) using 25mm thick | 180 | Sqm | |
| 11 | 11 | Columns, pillars, posts & strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having palne vertical face. (ii) Using 25 mm thick plank. | 100 | Sqm | |
| 12 | 12 | Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in : (1) Columns, pillars, post and strut of square / rectangular / poligonal in plan or any shape like Tee / L etc. having plain vertical face. | 140 | Sqm | |
| 13 | 13 | Sides and soffits of beams, beam hunching, cantilever, girders, bressumers and lintels and horizontal ties. (a) For depth not exceeding 1.0 M | 140 | Sqm | |
| 14 | 14 | Flat surface such as soffits of suspended floors, roof, landings, cantilever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness | 500 | Sqm | |
| 15 | 15 | Staircase with sloping or stepped soffits including risers and stringers but excluding landing. | 80 | Sqm | |
| 16 | 16 | Providing soling in foundation and under floor at all levels with stone/best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials complete. (a) Brick flat soling | 410 | Sqm | |
| 17 | 17 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In prop. 1:5 | 92 | Cum | |
| 18 | 18 | 112mm thick 1st class brick nogged wall in cement mortar embedded with protruding rod in column including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protruding M.S. rod/ tor steel will be measured and paid separately under relevant item of steel work) (c) In cement mortar in prop. 1:5 | 770 | Sqm | |
| 19 | 19 | Cement concrete works in topping 1:1:2 (1 cement, 1 sand : 2 graded aggregates on RCC floor , tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg of cement per sq m of floor (base concrete to be measured and paid separately) to be laid in panels including curing complete as directed. (b) 20 mm thick. | 400 | Sqm | |
| 20 | 20 | Plain cement concrete floor base in prop 1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick | 780 | Sqm | |
| 21 | 21 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above | 501.6 | Sqm | |
| 22 | 22 | 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering upto 1st floor level including arrises and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (b) In cement mortar 1:4 | 600 | Sqm | |
| 23 | 23 | B) On fair side (b) In Cement mortar 1:4 | 300 | Sqm | |
| 24 | 24 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii)Super Ductile (SD) TMT reinforcement bars | 250 | Qntl | |
| 25 | 25 | (c) I.S.I. approved M.S. Rod | 20 | Qntl | |
| 26 | 26 | Providing fitting & fixing steel windows of standard rolled steel sections as per relevant I.S Code,joints mitredand welded with 15mm x 13mm x 100mm lugs embedded in cement concrete block of M- 10 grade including providing and fixing of projecting hinges (not more than 65mm and not less han 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mm x 12mm sqare bars duly welded to steel frame at not more than 120mm c/c applying a priming coat of red-lead paint etc. complete as per drawing a) Openable. | 35 | Sqm | |
| 27 | 27 | Providing fitting & fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S Code, joints mitred and welded with 15mm x 13mm x 100mm lugs emdedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2 nos. of 12mm x 12mm sqare bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing | 15 | Sqm | |
| 28 | 28 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | 300 | Kg | |
| 29 | 29 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | 30 | Sq.m. | |
| 30 | 30 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | 35 | RM | |
| 31 | 31 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S. Code including oxidised iron butt hinges (100mmx75mmx3.5mm) 6Nos. With necessary wood screws. (b) Non decorative type and block board core. (ii) 35mm thick. | 45 | Sqm | |
| 32 | 32 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished) (A) Sliding door bolts (ii) 250 mm x 16 mm | 24 | Each | |
| 33 | 33 | (B) Tower bolts (iii) 200 mm x 12 mm | 10 | Each | |
| 34 | 34 | (C) Door handles (iii) 150 mm | 10 | Each | |
| 35 | 35 | Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. | 75 | Sqm | |
| 36 | 36 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. (ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | 120 | Rm | |
| 37 | 37 | Earth / Sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, Forest Royalty, Sales tax and other duties & taxes as may be necessary. (b) with hill sand obtained by truck carriage including loading and un loading, and carriage to the site of work. | 350 | Cum | |
| 38 | 38 | (c) With river sand or silt (Predominalty non plastic) by truck carriage including loading and unloading. | 80 | Cum | |
| 39 | 39 | Grading roof for water proofing treatment (a) Cement Concrete (i) 1:2:4 | 7.5 | Cum | |
| 40 | 40 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden beadings including necessary cutting of glass to required sizes (payment for wooden beads shall be made separately) (II) Area of glass panes exceeding 0.15 sq.m but not exceeding 0.52 sq.m b) 4.00 mm thick. | 60 | Sqm | |
| 41 | 41 | (c) Applying one coat of distemper primer of approved brand and manufacture on wall surface after throughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | 720 | Sqm | |
| 42 | 42 | (f) Distempering with dry distemper of approved brand and manufac ture ( two coats) and of reuired shade on new wall surface to give an even shade over and including priming coat of white primer after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing surface even and sand papered smooth. | 720 | Sqm | |
| 43 | 43 | (h) Distempering with dry distemper of approved brand and manufacture (one coat) and of required shade on old wall surface to give an even shade, after throughly brushing the surface clean of all grease, dirt, loose pieces of scales including preparing surface even and sand papered smooth. | 720 | Sqm | |
| 44 | 44 | (a) Applying one coat of cement primer of approved brand & manufacture on new wall surface after thoroughly brooming the surface free from mortar droppings & other foreign matter & including preparing the surface even and sand papered smooth. | 380 | Sqm | |
| 45 | 45 | (b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after thoroughly brooming the surfacesto remove all dirt and remains of loose powdered materials. | 380 | Sqm | |
| 46 | 46 | (d) Extra over item No. (b) and (c) for every subsequent coat of water proofing cement paint of pproved brand and manufacture. | 380 | Sqm | |
| 47 | 47 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | 23 | Cum | |
| 48 | 48 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). | 250 | Sqm | |
| 49 | 49 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned in above item (I) 112mm thick brick /R.B wall. | 150 | sqm | |
| 50 | 50 | Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | 150 | Sqm | |
| 51 | 51 | Providing precast RCC slab in prop. 1:2:4 reinforced with 10 mm TMT/HYSD bars @ 150 mm centre both ways tying with 20 guage black annealed wire with necessary shuttering, curing etc. complete including fixing in position as directed. (a) 100 mm thick slab. | 18 | Sqm | |
| 52 | 52 | Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. (c) Using ordinary cement | 40 | Sqm | |
| 53 | 53 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.(A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate | 80 | Sqm | |
| 54 | 54 | Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. | 880 | Sqm | |
| 55 | 55 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). a) Normal range Somany/ Orient / Nitco / Asian Make (i) of size 300mmx300mm and above | 40 | Sqm | |
| 56 | 56 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). b) Executive range Somany/ Orient/Nitco/Asian Make i) of size 200mmx300mm and above | 179 | Sqm | |
| 57 | 57 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary land compensation, Municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% duduction for shrinkage to be made from total quantity) etc. complete as directed and specified, including forest royalty within a distance of 8.00 km. (forest royalty shall be reimbursed on production of necessary certificate from the forest authority duly counter signed by D.F.O. concerned). (b) Other than Guwahati city | 100 | Sqm | |
| 58 | 58 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | 254 | Sqm | |
| 59 | 59 | SANITARY & WATER SUPPLY WORK\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm b) Coloured ii) Hindware make | 8 | Each | |
| 60 | 60 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\nii) Hindware make b) Coloured (i) Sleek+ PVC cistern | 8 | Sqm | |
| 61 | 61 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) :: Basin (without pedestal) (B) Hindware Make (a) White (iii) Viking 550 x 400 (Cat.No.10008) | 8 | Each | |
| 62 | 62 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | 4 | Each | |
| 63 | 63 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (ii) Agmeco Make (a) Cubin (Cat. No.CB-00102) | 4 | Each | |
| 64 | 64 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 30 | RM | |
| 65 | 65 | (iv) 75 mm dia | 6 | RM | |
| 66 | 66 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia | 8 | Each | |
| 67 | 67 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (v) 63mm dia. PVC cowel of ISI make | 4 | Each | |
| 68 | 68 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | 8 | Cum | |
| 69 | 69 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | 8 | Each | |
| 70 | 70 | Supplying fitting and fixing G.I. pipes of following sizes, with all necessary approved G.I. fitting such as bend, tee, eibow reducer, nipple, plug, long screw fitting H.W. clamps etc. complete at all level including below G.L. as directed and specified. (A) Exposed on walls (d) 25mm dia (i) Using TATA (Medium) | 30 | Rm | |
| 71 | 71 | (ii) Concealed by chiselling or breaking brick wall C.C. / RCC and making good to the damages. (f) 15 mm dia (i) Using Tata (Medium) | 15 | Rm | |
| 72 | 72 | Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) a) Continental (i) Shower arm 190mm long light body with wall flange | 4 | Each | |
| 73 | 73 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified ( G.I. & C.P. pipes will be measured separately) (I) Essco make (Delux/Sumthing spl./Tropical) (b) Long body bib cock with wall flange | 4 | Each | |
| 74 | 74 | Supplying and fitting ball valve as specified and directed. (a) 25mm dia (Gun metal) | 4 | Each | |
| 75 | 75 | Supplying fitting & fixing chrome plated (C.P) stop Cock of approved brand and size as mentioned below a below as directed and specified (G.I & C.P pipes Will be measured and paid separately). (I) Jaquar (a) Continental / Clarion (ii) 15mm dia( Angular stop cock with long thread ) | 4 | Each | |
| 76 | 76 | Supplying fitting & fixing CP pillar cock of 25mm dia of approved brand as specified and directed. (I) Sona make (d) Heavy type | 4 | Each | |
| 77 | 77 | Supplying, fitting and placing in position plastic cylindrical vertical closed top (PCVC) tank of Sintex / Polycon / Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed. (iii) 1000 ltr. (a) Sintex tank | 4 | Each | |
| 78 | 78 | FIRE FIGHTING\nHYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-'A') and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) | 2 | Each | |
| 79 | 79 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required.\n(Make:TATA/JINDAL/NEZONE)a) 200 mm dia | 10 | RM | |
| 80 | 80 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd.\n(Make:Koley/Kalpana/Audco)(a)150 mm dia | 2 | each | |
| 81 | 81 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a) 50 mm dia | 2 | Each | |
| 82 | 82 | Providing ,erection,Testing & Commissioning of Pressure Switch \n(MAKE:INDFOSS) | 2 | Each | |
| 83 | 83 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. | 2 | Each | |
| 84 | 84 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | 2 | Each | |
| 85 | 85 | LANDSCAPING\nPOT PLANTING\nSupplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(C) With Mokara\n(II) Using earthen pot of 60 cm dia. | 10 | Each | |
| 86 | 86 | POT PLANTING\nSupplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(H) With Iron Cross Begonia\n(II) Using earthen pot of 60 cm dia. | 10 | Each |
AI Tender Summary
Tender Timeline
Dec 21, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedJan 03, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 03, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender