Construction Of A Gram Panchayat Office At Kaledhon Ta Khatav
Tender Value
8.81 Lakhs
Estimated cost
Bid Submission
03 Jan 2020
0 days left
EMD
8900
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kaledhon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of A Gram Panchayat Office At Kaledhon Ta Khatav
BOQ
| Name of Work : Const.Grampanchayat Office Building @ KALEDHON {Jansuvidha 2019/20} Tal-Khatav. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and laying cast in situ / Ready Mix cement conrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed, including steel centering, formwork, cover blocks,aying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete.with fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For 2nd Floor)\nItem / Page No : 31 / 232\nSpecification No : Bd.F.5, B-7\nSpec. Page No : 300, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | BI01010001010000000000000515BI0100001112 | 3.35 | Cubic Metre |
| 2 | 2 | Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For 2nd Floor)\nItem / Page No : 50 / 234\nSpecification No : Bd.F.6, B-7\nSpec. Page No : 300-301, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | BI01010001010000000000000515BI0100001113 | 3.53 | Cubic Metre |
| 3 | 3.01 | Providing and laying cast in situ / Ready Mix Cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, compacting, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For Ground Floor)\nItem / Page No : 17 / 240\nSpecification No : Bd.F.11, B-7\nSpec. Page No : 304, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | BI01010001010000000000000515BI0100001114 | 4.62 | Cubic Metre |
| 4 | 3.02 | For First Floor\nItem / Page No : 17 / 240\nSpecification No : As per Item No 3a\nSpec. Page No : ---\nAdditional Specifications : As per Item No 3a | BI01010001010000000000000515BI0100001115 | 3.28 | Cubic Metre |
| 5 | 4 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates excetra as per detailed desings and drawings or as directed including cuting, fabricating, hoisting, erecting, fixing in position, making rivetted / bolted / welded connection and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade, excetra complete. (For 2nd Floor)\nItem / Page No : 4 / 223\nSpecification No : Bd.C.8\nSpec. Page No : 278\n | BI01010001010000000000000515BI0100001116 | 0.433 | Metric Ton |
| 6 | 5 | Providing and fixing of colour coated zincalume (R) AZ 150 (Minimum 150 grams per square metre total on each sides) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 milimetre base metal thickness (BMT) (0.5 milimetre TCT), Hi-strength steel with minium 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium, 43.4% zinc, 1.6% silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nominal 950-1050 milimetre effective cover width and nominal 25-30 milimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 milimetre center to centre. The end rib shall be designed for anti capilary groove and return leg. The feed material should have coil manufacturer's product details marked at regular interval. Including fasteners with minium fatened with minium 25 um zinc-tin alloy coated, hex head, self-drilling screw, excetra complete. (Weight of profile 4.52 kilogram per square metre). (For 2nd Floor)\nItem / Page No : 34 / 302\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001117 | 127 | Square Metre |
| 7 | 6 | Providing and fixing of colour coated zincalume (R) AZ 150 (Minimum 150 grams per square metre total on each sides) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 milimetre base metal thickness (BMT) (0.5 milimetre TCT), Hi-strength steel with minium 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium, 43.4% zinc, 1.6% silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nominal 950-1050 milimetre effective cover width and nominal 25-30 milimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 milimetre center to centre. The end rib shall be designed for anti capilary groove and return leg. The feed material should have coil manufacturer's product details marked at regular interval. Including fasteners with minium fatened with minium 25 um zinc-tin alloy coated, hex head, self-drilling screw, excetra complete. (Weight of profile 4.52 kilogram per square metre). - 301 milimetre to 600 milimetre girth (surface width) (For 2nd Floor)\nItem / Page No : 35 / 303\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001118 | 12.7 | Running Metre |
| 8 | 7 | Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 superstructure including striking joints, racking out joints, watering and scaffolding, excetra complete. (For 2nd Floor)\nItem / Page No : 5 / 254\nSpecification No : Bd.G.5\nSpec. Page No : 315\n | BI01010001010000000000000515BI0100001119 | 22.78 | Cubic Metre |
| 9 | 8 | Providing and fixing mild steel grill work for windows, ventilators, excetra 15 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, excetra complete. (For 2nd Floor)\nItem / Page No : 2 / 338\nSpecification No : Bd.U.1\nSpec. Page No : 537\n | BI01010001010000000000000515BI0100001120 | 18.72 | Square Metre |
| 10 | 9 | Providing and fixing frame with / without ventilator of size as specified with non teak wood for doors and windows including chamfering, rounding, rebating holdfast of size 300 milimetre X 40 milimetre X 5 milimetre with oil painting, excetra complete. (For 2nd Floor)\nItem / Page No : 2 / 313\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001121 | 0.041 | Cubic Metre |
| 11 | 10 | Providing and fixing solid core flush door shutter in single leaf 32 milimetre thick decorative type of exterior grade as per detailed drawings, approved face veneers 3 milimetre thick on both faces or as directed, all necessary beeds, moulding and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides and finishing with french polish, excetra complete. (For 2nd Floor)\nItem / Page No : 9 / 314\nSpecification No : Bd.T.34\nSpec. Page No : 499\n | BI01010001010000000000000515BI0100001122 | 1.89 | Square Metre |
| 12 | 11 | Providing and fixing in position (as per Indian Standard 1868/1982) aluminium sliding window of three tracks with rectangular pipe having overall dimentsions 95 milimetre X 38 milimetre X 0.90 milimetre at weight 0.637 kilogram per running metre and window frame bottom track section 92 milimetre X 31.75 milimetre X 1.30 milimetre at weight 1.070 kilogram per running metre. Top and side track section 92 milimetre X 31.75 milimetre X 1.30 milimetre at weight 0.933 kilogram per running metre. The shutter should be of bearing bottom 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre. Interlocking secion 40 milimetre X 18 milimetre X 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 milimetre X 18 milimetre X 1.25 milimetre at weight 0.417 kilogram per running metre as per detailed drawing and as directed by Engineer in-charge with all necessary aluminium sections, fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts excetra complete. - With colour anodising without box. (For 2nd Floor)\nItem / Page No : 42 / 323\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001123 | 18.72 | Square Metre |
| 13 | 12.01 | Providing and fixing in position thermo mechnically treated FE-500 bar reinforcements of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. (For First Floor)\nItem / Page No : 33 / 245\nSpecification No : Bd.F.17\nSpec. Page No : 306\n | BI01010001010000000000000515BI0100001124 | 0.18 | Metric Ton |
| 14 | 12.02 | For 2nd Floor\nItem / Page No : 33 / 245\nSpecification No : As per Item No 12a\nSpec. Page No : ---\nAdditional Specifications : As per Item No 12a | BI01010001010000000000000515BI0100001125 | 0.671 | Metric Ton |
| 15 | 13.01 | Providing and fixing mild steel grill railing weighing 15 kilogram per square metre with polyvinyl chloride handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing polyvinyl chloride handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, excetra complete. (For Ground Floor)\nItem / Page No : 10 / 339\nAdditional Specifications : The work shall be carried out as directed by Engineer-In-Charge. | BI01010001010000000000000515BI0100001126 | 4.5 | Square Metre |
| 16 | 13.02 | For First Floor\nItem / Page No : 10 / 339\nSpecification No : As per Item No 13a\nSpec. Page No : ---\nAdditional Specifications : As per Item No 13a | BI01010001010000000000000515BI0100001127 | 4.68 | Square Metre |
| 17 | 14 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. - Flooring (For First Floor)\nItem / Page No : 40 / 279\nSpecification No : Bd.M.12\nSpec. Page No : 385\n | BI01010001010000000000000515BI0100001128 | 67.83 | Square Metre |
| 18 | 15 | Providing and laying vitrified mirror / glossy finish decorative type tiles of size 590 milimetre to 605 milimetre X 590 milimetre to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. - Skirting (For First Floor)\nItem / Page No : 41 / 279\nSpecification No : Bd.M.12\nSpec. Page No : 385\n | BI01010001010000000000000515BI0100001129 | 1 | Square Metre |
| 19 | 16 | Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing, excetra complete. (For 2nd Floor)\nItem / Page No : 5 / 268\nSpecification No : Bd.L.2\nSpec. Page No : 368\n | BI01010001010000000000000515BI0100001130 | 3 | Square Metre |
| 20 | 17 | Provdiding internal cement plaster 20 milimetre thick in single coat in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (For 2nd Floor)\nItem / Page No : 8 / 268\nSpecification No : Bd.L.4\nSpec. Page No : 368\n | BI01010001010000000000000515BI0100001131 | 2 | Square Metre |
| 21 | 18.01 | Providing and fixing machine cut polished 18 milimetre to 20 milimetre thick telephone black / amba white / cadbury brown / RBI red / ocean brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on a bed of 1:4 cement mortar including float, filling joints with neat cement slurry, curing, polishing and cleaning, excetra complete. (For Ground Floor)\nItem / Page No : 35 / 278\nSpecification No : Bd.M.22 B\nSpec. Page No : 390\n | BI01010001010000000000000515BI0100001132 | 6.48 | Square Metre |
| 22 | 18.02 | For First Floor\nItem / Page No : 35 / 278\nSpecification No : As per Item No 18a\nSpec. Page No : ---\nAdditional Specifications : As per Item No 18a | BI01010001010000000000000515BI0100001133 | 6.48 | Square Metre |
| 23 | 19 | Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.\nItem / Page No : 3 / 0\nAdditional Specifications : 1. Government of Maharashtra, Revenue and Forest Department Gazette Number 67 Dated 15-5-2015 and Government of Maharashtra Public Works Department State Schedule of Rates 2017-18 General Note Number 4.3. 2. Above / below percentage quoted by the contractor will not be applicable for this item. | BI01010001010000000000000515BI0100001134 | 16.25 | Cubic Metre |
| 24 | 20 | Contribution towards District Mineral Foundation at the rate of 10 percent of prevailing rate of Royalty for various building construction bonafied materials which are used for government bonafied works and for which Royalty is to be paid by the contractor.\nItem / Page No : 10 / 0\nAdditional Specifications : 1. Government of Maharashtra, Industries, Energy and Labour Department Government Resolution Number MDF/0615/CR-34/IND-9 Dated 1-9-2016 and Section 2 thereof. 2. Above / below percentage quoted by the contractor will not be applicable for this item. | BI01010001010000000000000515BI0100001135 | 16.25 | Cubic Metre |
| 25 | 21 | Surcharge on Royalty charges at the rate of two percent of Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.\nItem / Page No : 14 / 0\nAdditional Specifications : 1. Letter from the Chief Engineer, Public Works Region, Nagpur; bearing number Ka.Raste-6/Darsuchi/7618/2019 dated 11/09/2019 and Corrigendum number 1 attached to the letter. 2. Above / below percentage quoted by the contractor will not be applicable for this item. | BI01010001010000000000000515BI0100001136 | 16.25 | Cubic Metre |
| 26 | 22 | Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.\nItem / Page No : 4 / 0\nAdditional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it. | BI01010001010000000000000515BI0100001137 | 1 | Job |
| 27 | 23 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m X 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols excetra with approved colour shade paint complete, on M.S.angle of size 35 X 35 X 3 milimetre frame with properly cross braced mild steel angles of size 35mmx35mmx3mm duly painted including Two mild steel angle iron posts of size 65 milimetre X 65 milimetre X 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 centimetre X 60 centimetre X 75 centimetre including, excavation, refilling, transportation, and labour etc complete. Spec. number As directed by Engineer in Charge\nItem / Page No : 36 / 73\nSpecification No : MoRTH-801\nSpec. Page No : ---\nAdditional Specifications : The work shall be carried out as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001138 | 1 | Number |
AI Tender Summary
Tender Timeline
Dec 20, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedJan 03, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 04, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender