| 1 | 1 | Dismantling plain or corrugated steel sheeting (Roof covering) of any description or any gauge or thickness complete all as specified and directed by Engr -in-Charge. | 1 | 153 | Sqm |
|---|
| 2 | 2 | Demolition of brick /block or stone masonry built in cement mortar, complete all as specified and directed by Engr -in-Charge. | 2 | 6 | Cum |
|---|
| 3 | 3 | Dismantling wall and ceiling boards of any description or any thickness including cover fillets complete all as specified and directed by Engr -in-Charge. | 3 | 200 | Sqm |
|---|
| 4 | 4 | Dismantling boarding, any description, fixed in any position with nails. | 4 | 120 | Sqm |
|---|
| 5 | 5 | Dismantling floor hearth and wall tiles including cement mortar bedding (but not backing) and removing from site complete all as directed. | 5 | 305.75 | Sqm |
|---|
| 6 | 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr -in-Charge. | 6 | 0.6 | Qtl |
|---|
| 7 | 7 | S&F rolled mild steel Fe -290(Gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified. | 7 | 60 | Kg |
|---|
| 8 | 8 | S &F Galvanized, corrugated mild steel sheeting, 0.63 mm thick, with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in roofs etc. with grade of zinc coating 275 in repair complete all as specified. | 8 | 70 | Sqm |
|---|
| 9 | 9 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering with self tapping screws as in ridge complete all as specified and as directed | 9 | 70 | Sqm |
|---|
| 10 | 10 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering with self tapping screws as in ridge complete all as specified and as directed | 10 | 8 | Sqm |
|---|
| 11 | 11 | S &F Plain, galvanized, mild steel sheeting, 0.80 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 in repairs complete all as specified. | 11 | 5 | Sqm |
|---|
| 12 | 12 | M&L for Pre-cast cement concrete block masonry in 1:3:6 type C1 using 20mm graded stone agg with solid block exc 10cm width and setting in CM 1:6 complete all as directed. | 12 | 6 | Cum |
|---|
| 13 | 13 | S &F Gypsum Board 12mm thick in ceiling as per manufacturers instructions, including GI frame work for seamless ceiling grid work, size of grid 605x605 mm for false ceiling, hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long complete all as specified. | 13 | 200 | Sqm |
|---|
| 14 | 14 | M&L for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 using liquid WPC, finished even and fair, complete all as specified. (Note : Liquid WPC shall be measured and paid separately) | 14 | 31 | Sqm |
|---|
| 15 | 15 | Supply only liquid water proofing compound, complete all as specified. | 15 | 2 | Ltr |
|---|
| 16 | 16 | M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed. | 16 | 31 | Sqm |
|---|
| 17 | 17 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint complete all as specified and directed. | 17 | 31 | Sqm |
|---|
| 18 | 18 | M&L for preparation of newly plastered surface of walls and applying two coat of oil bound distemper over birla wall care putty on walls, complete all as specified and directed. | 18 | 31 | Sqm |
|---|
| 19 | 19 | S&F hollow PVC Wall Lining Plain colour PVC sheet inclusive of solvent cement including PVC strip/corners and fixing at site on PVC frame as per specification and directed. | 19 | 120 | Sqm |
|---|
| 20 | 20 | M&L for Vitrified tiles of 10mm thick (square/Rectangular), polished area of each tiles n.exc 0.36 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed or bedding layer in CM 1:6 complete all as specified and as directed. | 20 | 275 | Sqm |
|---|
| 21 | 21 | M&L for Vitrified tiles of 10mm thick (square/Rectangular), polished area of each tiles n.exc 0.36 Sqm as in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed. | 21 | 30.75 | Sqm |
|---|
| 22 | 22 | M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 22 | 12 | Sqm |
|---|
| 23 | 23 | Net Contract Sum will be after deducting Sch Of Credit of Rs. 21340.00 | 23 | | |
|---|
