O/W Construction Of Veterinary Dispensary Building At Dhulghat Road Tq . Dharni
Tender Value
36.99 Lakhs
Estimated cost
Bid Submission
03 Jan 2020
0 days left
EMD
37000
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
DHARNI → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
O/W Construction Of Veterinary Dispensary Building At Dhulghat Road Tq . Dharni
BOQ
| Name of Work: O/W Construction of Veterinary Dispensary Building at Dhulghat Road Tq.Dharni | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) \nBy Mechanical Means | BI01010001010000000000000515BI0100001113 | 199.53 | Cum |
| 2 | 2 | Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) \nBy Mechanical Means | BI01010001010000000000000515BI0100001114 | 71.58 | Cum |
| 3 | 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.\n(SSR 18-19 Item No.21.40) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001115 | 80.96 | Cum |
| 4 | 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.24.01) Bd. E. 1 Page No. 287 | BI01010001010000000000000515BI0100001116 | 47.48 | Cum |
| 5 | 5 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.25.11) Bd.F.3 Page No. 298 and B.7, Page No.38 | BI01010001010000000000000515BI0100001117 | 25.71 | Cum |
| 6 | 6 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.\n(SSR 18-19 Item No.21.37) Bd.A.11 Page No. 263 | BI01010001010000000000000515BI0100001118 | 133.72 | Cum |
| 7 | 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.25.31) Bd.F.5 Page No. 300 and B.7, Page.No. 38 | BI01010001010000000000000515BI0100001119 | 12.11 | Cum |
| 8 | 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\n(SSR 18-19 Item No.25.50) Bd.F.6 Page No. 300 and B.7, Page No.38 | BI01010001010000000000000515BI0100001120 | 18.68 | Cum |
| 9 | 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.25.70) Bd.F.8 Page No. 302 and B.7, Page No.38 | BI01010001010000000000000515BI0100001121 | 18.27 | Cum |
| 10 | 10 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.26.17) Bd.F.11 Page No. 304 and B.7, Page No. 38 | BI01010001010000000000000515BI0100001122 | 0.69 | Cum |
| 11 | 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.26.05) Bd.F.9 Page No.303 and B.7, Page No.38 | BI01010001010000000000000515BI0100001123 | 1.18 | Cum |
| 12 | 12 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.\n(SSR 18-19 Item No.26.33) Bd.F.17, Page No. 306 | BI01010001010000000000000515BI0100001125 | 6.07 | MT |
| 13 | 13 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.\n(SSR 18-19 Item No.27.01) Bd.G. 1 Page No.313 | BI01010001010000000000000515BI0100001126 | 23.18 | Cum |
| 14 | 14 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.24.16) Bd.E. 3/Page No. 288/I.S. 456 (2000) | BI01010001010000000000000515BI0100001127 | 3.12 | Cum |
| 15 | 15 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete\n(SSR 18-19 Item No.27.05) Bd.G.5 Page No. 315 | BI01010001010000000000000515BI0100001128 | 54.68 | Cum |
| 16 | 16 | Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.)\n(SSR 18-19 Item No.39.20) BD-T-53 Page No. 509 | BI01010001010000000000000515BI0100001129 | 3.48 | Sqm |
| 17 | 17 | Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) \nCommercial Hard Wood shutter\n (NEW CSR item No.4, Page No.) Bd.T.34/Page No.499 | BI01010001010000000000000515BI0100001130 | 14.07 | Sqm |
| 18 | 18 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .\n(SSR 18-19 Item No.39.56) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001131 | 46.3 | Rmt |
| 19 | 19 | Providing and fixing FRP (Fiber reinforced Plastic) Door with shutter 25 to 30 mm. Thick having properties such as water proof resistantto termite resistant to mild acids and chemical. The thickness of FRP shold of 1.5 mm. With extra reinforcement to sides, edges, recess for alluminium fixtures and fastenings and commercial types as per the approved design including alluminium, fixtures and fastenings and two coats of synthetic acrylic emulsion paint etc. complete.( Excluding door frame) (for W.C. and bath doors)\n(NEW CSR item No.9, Page No.) As directed by Engineer- in-charge. | BI01010001010000000000000515BI0100001132 | 2.85 | Sqm |
| 20 | 20 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.\n(SSR 18-19 Item No.27.06) Bd.G.7 Page No. 316 | BI01010001010000000000000515BI0100001133 | 5.69 | Sqm |
| 21 | 21 | Providing and fixing in position Mild steel fixed staggered ( Z Type ) Ventilator as per detailed drawing with hot deep zink coating including fabricating with Mild steel 'Z 'Section of size 20mm x 25 mm and 3 mm thick at weight 1.42 Kg/Rmt,with stainless steel mosquito net of 304 Grade,4 mm thick float glass ?as directed by Engineer In charge including necessary welding, grinding, two coats of oil paint\netc.complete\n(SSR 18-19 Item No.39.77) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001134 | 3.48 | Sqm |
| 22 | 22 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.\n(SSR 18-19 Item No.32.04) Bd. L.2 Page No. 368 | BI01010001010000000000000515BI0100001135 | 337.62 | Sqm |
| 23 | 23 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.\n(SSR 18-19 Item No.32.01) Bd. L.1 Page No. 367 | BI01010001010000000000000515BI0100001136 | 98.89 | Sqm |
| 24 | 24 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. \n(SSR 18-19 Item No.32.34) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001137 | 436.51 | Sqm |
| 25 | 25 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.\n(SSR 18-19 Item No.32.07) Bd.L.4 Page No. 368 | BI01010001010000000000000515BI0100001138 | 251.51 | Sqm |
| 26 | 26 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring\n(SSR 18-19 Item No.33.40) Bd.M. 12 Page No.385 | BI01010001010000000000000515BI0100001139 | 94.51 | Sqm |
| 27 | 27 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting\n(SSR 18-19 Item No.33.41) Bd.M. 12 Page No.385 | BI01010001010000000000000515BI0100001140 | 7.72 | Sqm |
| 28 | 28 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.\n(SSR 18-19 Item No.33.24) Bd.M.12 Page No. 385 | BI01010001010000000000000515BI0100001141 | 22.16 | Sqm |
| 29 | 29 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.\n(SSR 18-19 Item No.33.25) Bd.M.13 Page No. 386 | BI01010001010000000000000515BI0100001142 | 38.68 | Sqm |
| 30 | 30 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.\n(SSR 18-19 Item No.35.21) As directed by Engineerin charge. | BI01010001010000000000000515BI0100001143 | 436.51 | Sqm |
| 31 | 31 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.\n(SSR 18-19 Item No.36.14) Bd.P.6 Page No. 414 and Pre-approval of Superintending Engineer | BI01010001010000000000000515BI0100001144 | 436.51 | Sqm |
| 32 | 32 | Providing and applying two coat of Polymer based external paint of standard manufacture like Apex from Asian paints, Excel from Nerolac paints,promise from Dulux of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface etc. for specified buildings complete.(including primer coat )(Prior specific permission of S.E. shall be obtained before inclusion of this item in the estimate.)\n(NEW CSR item No.13, Page No.) As directed by Engineer- in-charge. | BI01010001010000000000000515BI0100001145 | 251.51 | Sqm |
| 33 | 33 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. \n(SSR 18-19 Item No.42.12) Bd.V.43, Page No. 574 | BI01010001010000000000000515BI0100001146 | 2 | No |
| 34 | 34 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete\n(SSR 18-19 Item No.42.51) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001147 | 6 | Rmt |
| 35 | 35 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.\n(SSR 18-19 Item No.42.52) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001148 | 6 | Rmt |
| 36 | 36 | Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.\n(SSR 18-19 Item No.33.23) Bd.M.29 Page No. 391 | BI01010001010000000000000515BI0100001149 | 3.6 | Sqm |
| 37 | 37 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.\n(SSR 18-19 Item No.42.19) Bd.V.46, Page No. 576 | BI01010001010000000000000515BI0100001150 | 1 | No |
| 38 | 38 | Providing and fixing coloured glazed earthenware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.\n(SSR 18-19 Item No.41.67) Bd.V.30 Page No. 565 | BI01010001010000000000000515BI0100001151 | 3 | No |
| 39 | 39 | Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)\n(SSR 18-19 Item No.43.18) Specfications | BI01010001010000000000000515BI0100001152 | 3 | No |
| 40 | 40 | Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.\n(SSR 18-19 Item No.42.33) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001153 | 2 | No |
| 41 | 41 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.\n(SSR 18-19 Item No.21.36) Bd.A.10 Page No. 262 | BI01010001010000000000000515BI0100001154 | 10.8 | Cum |
| 42 | 42 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters\n(SSR 18-19 Item No.42.53) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001155 | 2000 | Litre |
| 43 | 43 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand)\n(SSR 18-19 Item No.33.53) Bd. M-12 page No. 385 | BI01010001010000000000000515BI0100001156 | 164 | Sqm |
| 44 | 44 | Finishing the terrece slab integrally mixed with water proofing compound in C.M. 1:3 with 12 mm thick layer including curing, finishing,using waterproofing compound as approved by Engineer-in-charge at the rate of 1 kg per bag of cement etc. complete.(Note : Item not to be used as waterproofing treatment over terreces.)\n(NEW CSR item No.14, Page No.29)\nAs directed by Engineer- in-charge. | BI01010001010000000000000515BI0100001157 | 133.49 | Sqm |
| 45 | 45 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.\n(SSR 18-19 Item No.42.55) BD.V 5 page 551 and as directed by Engineer in charge | BI01010001010000000000000515BI0100001158 | 50 | Rmt |
| 46 | 46 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.\n(SSR 18-19 Item No.42.56) BD.V 5 page 551 and as directed by Engineer in charge | BI01010001010000000000000515BI0100001159 | 80 | Rmt |
| 47 | 47 | Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super bib tap with flange including all accessories etc complete\n(SSR 18-19 Item No.43.33) As Directected By Engineer Incharge | BI01010001010000000000000515BI0100001160 | 5 | No |
| 48 | 48 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.24.08) Bd.E.4 Page No. 289 and B-7, Page No.38 | BI01010001010000000000000515BI0100001161 | 0.04 | Cum |
| 49 | 49 | Providing and fixing 12 mm dia. mild steel bar upto 0.5 M. length for anchor rods with necessary threading nuts and bolts etc. complete.\n(SSR 18-19 Item No.38.32) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001162 | 4 | No |
| 50 | 50 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.\n(SSR 18-19 Item No.23.04) Bd.C.8 Page No. 278 | BI01010001010000000000000515BI0100001163 | 0.0110042 | MT |
| 51 | 51 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983).\n(SSR 18-19 Item No.39.26) BD-T-57 Page No. 511 | BI01010001010000000000000515BI0100001164 | 3.15 | Sqm |
| 52 | 52 | Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. b) Granite \n(SSR 18-19 Item No.33.22) Spec.No.: Bd.M.31/Page No.393 | BI01010001010000000000000515BI0100001165 | 4.95 | Sqm |
| 53 | 53 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box\n(SSR 18-19 Item No.39.40) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001166 | 19.44 | Sqm |
| 54 | 54 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.\n(SSR 18-19 Item No.40.01) Bd.U.1 Page No. 537 | BI01010001010000000000000515BI0100001167 | 19.44 | Sqm |
| 55 | 55 | Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)\n(SSR 18-19 Item No.40.08) As directed by Engineer Incharge | BI01010001010000000000000515BI0100001168 | 10.53 | Rmt |
| 56 | 56 | Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box\n(SSR 18-19 Item No.39.41) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001169 | 3.6 | Sqm |
| 57 | 57 | Providing & Fixing mat finish stainless steel lettering of various heights as directed by Engineer in-charge including material, labour, cleaning etc. complete.\n(NEW CSR item No.18, Page No.) As directed by Engineer- in-charge. \nA) For single letter like A, B, C etc. in english and †,²Ö, ú ‡ŸµÖÖ¤üß ´Ö¸üÖšüߟÖæÖ\n1) Upto height of 30 cm. | BI01010001010000000000000515BI0100001170 | 20 | per cm.of height |
| 58 | 58 | 2) From 30 to 45 cm. height | BI01010001010000000000000515BI0100001171 | 20 | per cm.of height |
| 59 | 59 | Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. \na) Marble other than white makraDeleted \n(SSR 18-19 Item No.33.21) Spec.No.: Bd.M.31/Page No.392 | BI01010001010000000000000515BI0100001172 | 4.32 | Sqm |
| 60 | 60 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.\n(SSR 18-19 Item No.33.34) Bd.M. 3 B/Page No. 380 | BI01010001010000000000000515BI0100001173 | 3.6 | Sqm |
| 61 | 61 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.\n(SSR 18-19 Item No.42.87) As directed by engineer-in-charge. | BI01010001010000000000000515BI0100001174 | 20 | Rmt |
| 62 | 62 | CEMENT\nStandard Consistancy, Fineness, Specific Gravity, Initial Setting Time, Final Setting Time. Compressive Strength, Soundness by Lechatelier Apparatus | BI01010001010000000000000515BI0100001175 | 1 | No |
| 63 | 63 | Aggregate\n Water Absorption, Specific Gravity, Impact Value, Crushing Value | BI01010001010000000000000515BI0100001176 | 1 | No |
| 64 | 64 | Bricks\nWater Absorption (Set of 5 Bricks), Compressive Strength (Set of 5 Bricks), Efflorescence ((Set of 5 Bricks) | BI01010001010000000000000515BI0100001177 | 1 | No |
| 65 | 65 | Concrete\nOne Test For R.C.C. Footing | BI01010001010000000000000515BI0100001178 | 4 | No |
| 66 | 66 | One Test For R.C.C. Column | BI01010001010000000000000515BI0100001179 | 3 | No |
| 67 | 67 | One Test For R.C.C. Beam | BI01010001010000000000000515BI0100001180 | 4 | No |
| 68 | 68 | One Test For R.C.C. Slab | BI01010001010000000000000515BI0100001181 | 3 | No |
| 69 | 69 | One Test For R.C.C. Chajaa | BI01010001010000000000000515BI0100001182 | 1 | No |
| 70 | 70 | Steel\nTensile Strength, Elongation, Yield Stress, Weight Per Meter, Bend / Rebend Test, Proof Stress | BI01010001010000000000000515BI0100001183 | 1 | No |
| 71 | 71 | Sand\nFineness Modulus (Sieve Analysis), Silt and Clay Content | BI01010001010000000000000515BI0100001184 | 1 | No |
| 72 | 72 | Paving Block\nCompressive Strength Water Absorption | BI01010001010000000000000515BI0100001185 | 1 | No |
| 73 | 73 | Royalty Charges | BI01010001010000000000000515BI0100001186 | 332.135 | Cum |
AI Tender Summary
Tender Timeline
Dec 20, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedJan 03, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 04, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender