Supply And Fixing Of Kitchen Equipment At Sap Camp , Thiruvananthapuram, Thiruvananthapuram-Kerala

Supply And Fixing Of Kitchen Equipment At Sap Camp , Thiruvananthapuram - 2 15.7.4 Ndemolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. Nin Cement Mortar 3 15.13.2 Ntaking Out Doors, Windows And Clerestory Window Shutters ( Steel Or Wood ) Including Stacking Within 50 Metres Lead:Of Area Beyond 3 Sq. Metres 4 15.23.1 Ndismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. Nfor Thickness Of Tiles 10 Mm To 25 Mm 5 9.1.1 Nproviding Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately ) . Nsecond Class Teak Wood 6 9.7.1 Nproviding And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) , Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick: Nsecond Class Teak Wood N 7 4.1.6 Nproviding And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level: N1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 40 Mm Nominal Size ) 8 2.25 Nfilling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M. 9 6.3.2 N Brick Work With Common Burnt Clay Machine Moulded Perforated Bricks Of Classdesignation 12.5 Conforming To Is: 2222 In Superstructure Above Plinth Level Up Tofloor Five Level In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) : Nwith Modular Bricks ( From Floor 2 Level Up To Floor 5 Level ) 10 10.29.1 Nproviding & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete. Ngalvanised M.S. Wire Gauze With 0.63 Mm Dia Wire And 1.4 Mm Aperture On Both Sides N 11 10.16.1 N Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Nhot Finished Welded Type Tubes 12 12.1.3 Nproviding Corrugate G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Up To Any Pitch In Horizontal / Vertical Or Curved Surfaces ) , Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. N0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm / M2 13 13.5.1 N15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: N1:4 ( 1 Cement : 4 Coarse Sand ) N 14 13.37.1 Nwhite Washing With Lime To Give An Even Shade: Nnew Work ( Three Or More Coats ) N 15 13.48.1 Nfinishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications: Ntwo Or More Coats Applied On Walls @ 1.25 Ltr / 10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr / 10 Sqm 16 13.48.3 Nfinishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications: Npainting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr / 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr / 10 Sqm Of Approved Brand And Manufacture 17 13.48.2 N Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications: Npainting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr / 10 Sqm Over An Under Coat Of Primer Applied @ 0.75 Ltr / 10 Sqm Of Approved Brand And Manufacture 18 N10.4 Nproviding And Fixing 1 Mm Thick M.S. Sheet Sliding- Shutters, With Frame And Diagonal Braces Of 40X40x6 Mm Angle Iron, 3 Mm M.S. Gusset Plates At The Junction And Corners, 25 Mm Dia Pulley, 40X40x6 Mm Angle And T-Iron Guide At The Top And Bottom Respectively, Including Applying A Priming Coat Of Approved Steel Primer. 19 Drainage System 20 50.18.9.9.1 Nproviding And Fixing Pvc Pipes Includings Jointing Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.110 Mm Dia 6Kgf / Cm2 21 50.18.9.22.1 Nproviding And Fixing Pvc Moulded Fittings / Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110 Mm Dia Elbow 22 50.18.9.22.2 Nproviding And Fixing Pvc Moulded Fittings / Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110 Mm Dia 45 Degree Elbow 23 50.18.9.22.6 Nproviding And Fixing Pvc Moulded Fittings / Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110X110x110 Mm Dia Door Tee 24 50.18.9.8.1 Nproviding And Fixing Pvc Pipes Includings Jointing Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 75 Mm Dia 6 Kgf / Cm2 25 50.18.9.21 Nproviding And Fixing Pvc Moulded Fittings / Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 75 Mm Dia Elbow 26 50.18.9.21.2 Nproviding And Fixing Pvc Moulded Fittings / Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement -75 Mm Dia 45 Degree Elbow 27 50.18.9.21.3 Nproviding And Fixing Pvc Moulded Fittings / Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement-110 Mm Dia Door Elbow 28 5.3 N Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs, Having Slope Up To 150 Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) . 29 5.9.16.2 Ncentering And Shuttering Including Strutting, Etc. And Removal Of Form For: Nedges Of Slabs And Breaks In Floors And Walls Nabove 20 Cm Wide N 30 5.22.6 Nsteel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level Nthermo - Mechanically Treated Bars Of Grade Fe-500D Or More 31 Providing And Fixing Pvc Pipes Including Jointings Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling And Amp:Amp:Testing Of Joints Complete As Per Direction Of Engineer In Charge. 160 Mm Dia 6Kgf / Cm2; Qty 25 Meter; Rs 650 / Meter 32 Proposed Kitchen Equipment 33 Kitchen Steam Boiler Operated By Lpg Outer Shell Is Made Out Of 8 And 5 Mm Ms Plates Inner Shell Is Made Out Of 2 Mm Thickness 304 Grade S.5 Sheet. Boiler Is Fitted With Gauge Glass Set For Knowing Water Level Safety Valve And Smoke Vent No:5 Model Boiler Size 32X 50 Height With 178 Burner 34 Single Jacketed Rise Vessels It Is Made Out Of 2Mm Thickness ( 14 Swg ) 304 Grade S.S Sheet. Side Support Is Made Out Of 65 Mm Od S.S Rods . Bottom Perforated Sheet Is Provided For Drain Out Of Kanji. Handle Rod Is Provided For Easily Tilting The Vessel. 30 Kg Capacity Rice Vessel, Size 25Od X 25 Height 35 Double Jacketed Sambar Vessel Inner Jacket Is Made Out Of 2 Mm Thickness ( 14Swg ) And Outer Jacket Is Made Out Of ( 14Swg ) 304 Grade S.S Sheet . Side Support Is Made Out Of 65 Mm Od S.S Rods . Handle Rod Is Provided For Easily Tilting The Vessel 100 Litres. Capacity Sambar Ve Ssel Size : 20 Odx 20 Height 36 Frame Vessels Stands Vessels Stand Are Made Out 2 Od S.S Pipes And 8 Mm S.S Plates For Mounting 5 No Vessels 37 240 Nos Capacity Idly Box It Is Made Out Of 18 Swg 304 Grade S.S Sheet . Each Chamber Contains Three Trays And Makes 60 Idly . Four Chambers Make 240 Idly In One Time Within 10 Minuts . No: Of Trays ( 12 +3 ) With S.S Stands. 38 Steam Line Materials 3 / 4 G.I.C Class Pipe For Steam Line , Gi Elbow , T And Ball Valves 39 Steam Line Erection Charges 40 Masonry Work For Platform And Fixing Steam Utensils. Fixing On The Ground And Basement Works ( 15Ft X 6Ft ) No Tiling Required. Drain In Cement With Grout Finish For Waste Water. 41 Chapathy Machine Semi Automatic 2000 Chappathy Per Hour. Single Phase 1Hp Motor. Uncooked Chappathy 42 Commercial Atta Kneader 230-440V 20Kg 43 Ss Tumbler 300 Ml 44 Ss Meals Plate 4 Compartment 45 Dinner Set With Plates And Bowl 33 Piece Porcelean 46 Plate Racks Fabricated In Steel Tube With Painting. 4 Rack 47 Food Placing Table Inside Mess Hall Stainless Steel 2 Shelve 48 Gas Pipe Line Works - 25 Mtrs -With Pipes, Fittings, Connectors, Outlets And Inlets 49 Gas Stove 2 Burner For Kitchen Fabricated In Steel 50 Wet Grinder With Heavy Stand Tiltable Motor Of Capacity 1.5 Hp Equipped With Grinding Capacity Of 15L Robust Design And Sturdy Construction Aids Longer Service Life Hassle Free Operations, Easy Handling And Setup 51 Wet Grinder Non Tiliting, Stainless Steel Drum, 5-7 Kg Capacity. Single Phase Power Supply 52 Heavy Duty Mixer Grinder With Jar Ideal For Both Dry & Wet Grinding, Stainless Steel 2Hp Motor 53 Canteen Seating Stainless Steel Table With 6 Stools Seating Foldable 54 20L Stainless Steel Electric Water Catering Boiler 55 Serving Bowl With Lid L23xb16xh22.5 56 Plain Stainless Steel Water Jug With Handle 57 Serving Spatulas, Rice Spoons, Lids And Accessories 58 Stainless Steel Buckets Heavy Duty 59 Steel Trolley ( Painted ) With Handle And 3 Racks For Heavy Duty Application Upto 300 Kg Weight. Wheels With Foot Lock Brake. 60 Stainless Steel Food Serving Trolley Maximum 50 Kg Support ( 3 Rack ) 61 Double Layered Water Tank, Food Grade, Antibacterial, Uv Resistant, Bpa-Free 1000 Litres 62 Plumbing Line Works From Tank In Upvc And Gi Pipe ( Boiler ) 63 Platform For Watertank In Rcc After Earth Levelling ( 2.2 X 2.2 X 0.20 ) 64 Supply, Installation Testing And Commissioning Of Exhuast Fan Including Wiring With 2.5Sqmm Frls Pvc Insulated, Copper Conductor, Single Core Cable Etc..As Required.380Mm Light Duty Exhuast Fan Working On 230V A / C 65 Supply And Fixing Of High Purification Ro Water Purifier.Purification Production Rate 80L / Hr.Max Duty Cycle 400L / Day.Net Weight 25Kg 66 Electrification 67 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point Nwith 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. 68 Group A ( 1.10.1 ) 69 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Nconduit As Required. 70 25 Mm ( 1.21.2 ) 71 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Casing And Capping 72 25 Mm ( Lmr ) 73 Supply & Fixing The Following Types / Sizes Of Boxes Suitable For Modular Accessories In Surface / Recess Including Making Good The Damages, Colour Washing Etc As Required ( Rohs Compliant ) ( 90.10.1 ) 74 1 Or 2 Module 75 8 Module 76 Supplying And Fixing Following Modular Base & Cover Plate On Nexisting Modular Metal Boxes Etc. As Required. ( 1.28 ) 77 1 Or 2 Module 78 8 Module 79 Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Nfollowing Sizes Of Frls Pvc Insulated Copper Conductor, Single Ncore Cable In Surface / Recessed Medium Class Pvc Conduit As Nrequired. ( 1.14 ) 80 2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire ( 1.14.3 ) 81 2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire ( 1.14.2 ) 82 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. ( 1.17 ) 83 2 X 1Sq. Mm ( Lmr ) 84 3 X 4 Sq. Mm ( 1.17.21 ) 85 2 X 2.5 Sq. Mm ( 1.17.11 ) 86 3 X 2.5 Sq. Mm ( 1.17.12 ) 87 Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. ( 1.24 ) 88 5 / 6 A Switch ( 1.24.1 ) 89 3 Pin 5 / 6 A Socket Outlet ( 1.24.4 ) 90 15 / 16 A Switch 91 6 Pin 15 / 16 A Socket Outlet 92 Supply And Installation Of Sheet Steel, Phosphatised And Painted, Dust And Vermin Proof Enclosure Of Mcb Db Including Copper / Brass Bus Bar, Neutral Link, Earth Bus And Din Rail Suitable For Fixing Mcb / Isolator Etc. Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall , Making Good The Damages, Colour Washing Etc. As Required ( 90.11.1.10 ) 93 4 Way ( 8+12 ) - Three Phase Double Cover ( Ip 42 / 43 ) 94 Supplying And Fixing 5 A To 32 A Rating, 240 / 415 V, 10 Ka, “C” Ncurve, Miniature Circuit Breaker Suitable For Inductive Load Of Nfollowing Poles In The Existing Mcb Db Complete With Nconnections, Testing And Commissioning Etc. As Required. N 95 Single Pole ( 2.10.1 ) 96 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In Nthe Existing Mcb Db Complete With Connections, Testing And Ncommissioning Etc. As Required. 97 63 A ( 2.13.2 ) 98 Supplying And Fixing Following Rating, Four Pole, ( Three Phase Nand Neutral ) , 415 V, Residual Current Circuit Breaker ( Rccb ) , Nhaving A Sensitivity Current 30 Ma In The Existing Mcb Db Ncomplete With Connections, Testing And Commissioning Etc. As Nrequired. 99 40A ( 2.15.2 ) 100 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal / Coke And Salt As Required. ( 5.4 ) 101 Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required.Standard Make And Isi Marked 102 3.15 Mm Copper Conductor ( 10 Swg ) ( Lmr ) 103 Supply And Installation Of 9W Led Bulb. ( Make: Philips / Crompton / Equivalent ) Standard Make And Isi Marked ( Lmr ) 104 Led Tube Light Fitting Suitable For Single 20 W T5 Lamp With Lamp Nholder, Apf Electronic Ballest Suitable For Continious Operation With Thd N<10%, Power Factor >0.98, Rohs Compliant, Duly Wired Up For Use On N230 V Ac Supply Without Fluorescent Tubes. The Fittings Shall Be Made Nfrom Crca Ms Sheet Of Minimum Thickness 0.50 Mm Nominal Thickness Ninside And Outside. ( Make: Philips / Crompton / Equivalent ) Standard Make And Isi Marked ( Lmr ) 105 Supply And Installation 1200 Mm Sweep- 5 Star Rated Ceiling Fan, Complete With 300Mm Down Nrod, Canopies, Shackles And Blades And Resistance Type Regulator Nworking On 230 / 240V Single Phase A / Cstandard Make And Isi Marked ( Lmr ) N 106 Supplying And Fixing Brass Batten / Angle Holder Including Nconnections Etc. As Required.

INR 2950 /-

INR 50000.0 /-

INR 27.28 Lakhs /-

Name of Work: Supply and fixing of kitchen equipment at SAP Camp, Thiruvananthapuram
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Civil works	BI01010001010000000000000515BI0100001112
2	1.01	15.7.4\nDemolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.\nIn cement mortar	BI01010001010000000000000515BI0100001113	7.003	cum
3	1.02	15.13.2\nTaking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area beyond 3 sq. metres	BI01010001010000000000000515BI0100001114	2	each
4	1.03	15.23.1\nDismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.\nFor thickness of tiles 10 mm to 25 mm	BI01010001010000000000000515BI0100001115	13.573	sqm
5	1.04	9.1.1\nProviding wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).\nSecond class teak wood	BI01010001010000000000000515BI0100001116	0.036	cum
6	1.05	9.7.1\nProviding and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:\nSecond class teak wood\n	BI01010001010000000000000515BI0100001117	2.46	sqm
7	1.06	4.1.6 \nProviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:\n1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)	BI01010001010000000000000515BI0100001118	3.36	cum
8	1.07	2.25\nFilling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.	BI01010001010000000000000515BI0100001119	8.1	cum
9	1.08	6.3.2\n Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):\nWith Modular bricks(from floor 2 level up to floor 5 level)	BI01010001010000000000000515BI0100001120	7.375	cum
10	1.09	10.29.1\nProviding & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.\nGalvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides\n	BI01010001010000000000000515BI0100001121	24.92	sqm
11	1.1	10.16.1\n Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.\nHot finished welded type tubes	BI01010001010000000000000515BI0100001122	230.031	kg
12	1.11	12.1.3\nProviding corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.\n0.63 mm thick with zinc coating not less than 275 gm/m2	BI01010001010000000000000515BI0100001123	23.806	sqm
13	1.12	13.5.1\n15 mm cement plaster on rough side of single or half brick wall of mix:\n1:4 ( 1 Cement : 4 coarse sand)\n	BI01010001010000000000000515BI0100001124	49.072	sqm
14	1.13	13.37.1\nWhite washing with lime to give an even shade:\nNew work (three or more coats)\n	BI01010001010000000000000515BI0100001125	675.613	sqm
15	1.14	13.48.1\nFinishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:\nTwo or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm	BI01010001010000000000000515BI0100001126	667.273	sqm
16	1.15	13.48.3\nFinishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:\nPainting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture	BI01010001010000000000000515BI0100001127	38.858	sqm
17	1.16	13.48.2\n Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:\nPainting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture	BI01010001010000000000000515BI0100001128	5.04	sqm
18	1.17	\n10.4 \nProviding and fixing 1 mm thick M.S. sheet sliding- shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junction and corners, 25 mm dia pulley, 40x40x6 mm angle and T-iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer.	BI01010001010000000000000515BI0100001129	1.891	sqm
19	2	Drainage system	BI01010001010000000000000515BI0100001130
20	2.01	50.18.9.9.1\nProviding and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2	BI01010001010000000000000515BI0100001131	100	m
21	2.02	50.18.9.22.1\nProviding and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow	BI01010001010000000000000515BI0100001132	10	no
22	2.03	50.18.9.22.2\nProviding and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow	BI01010001010000000000000515BI0100001133	10	no
23	2.04	50.18.9.22.6\nProviding and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee	BI01010001010000000000000515BI0100001134	2	no
24	2.05	50.18.9.8.1\nProviding and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2	BI01010001010000000000000515BI0100001135	5	m
25	2.06	50.18.9.21\nProviding and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Elbow	BI01010001010000000000000515BI0100001136	2	no
26	2.07	50.18.9.21.2\nProviding and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia 45 degree Elbow	BI01010001010000000000000515BI0100001137	3	no
27	2.08	50.18.9.21.3\nProviding and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow	BI01010001010000000000000515BI0100001138	4	no
28	2.09	5.3\n Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).	BI01010001010000000000000515BI0100001139	0.2	cum
29	2.1	5.9.16.2\nCentering and shuttering including strutting, etc. and removal of form for:\nEdges of slabs and breaks in floors and walls\nAbove 20 cm wide\n	BI01010001010000000000000515BI0100001140	1.6	sqm
30	2.11	5.22.6\nSteel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level\nThermo - Mechanically Treated bars of grade Fe-500D or more	BI01010001010000000000000515BI0100001141	16	kg
31	3	Providing and fixing PVC pipes including jointings of pipes with one step PVC solvent cement, trenching, refilling and amp:amp:testing of Joints complete as per direction of engineer in charge. 160 mm dia 6Kgf/cm2; Qty 25 meter; Rs 650/meter	BI01010001010000000000000515BI0100001142	1	LS
32	4	Proposed kitchen Equipment	BI01010001010000000000000515BI0100001143
33	4.01	Kitchen Steam Boiler Operated by LPG Outer shell is made out of 8 and 5 mm MS Plates inner shell is made out of 2 mm thickness 304 grade S.5 sheet. Boiler is fitted with gauge glass set for knowing water level safety valve and smoke vent No:5 model boiler size 32x 50" height with 178 burner	BI01010001010000000000000515BI0100001144	1	Each
34	4.02	Single Jacketed Rise Vessels It is made out of 2mm thickness (14 SWG) 304 Grade S.S Sheet. Side support is made out of 65 mm OD S.S rods . Bottom perforated sheet is provided for drain out of kanji. Handle rod is provided for easily tilting the vessel. 30 Kg Capacity Rice vessel, size 25"OD x 25" height	BI01010001010000000000000515BI0100001145	3	Each
35	4.03	Double Jacketed Sambar Vessel Inner jacket is made out of 2 mm thickness (14SWG) and outer jacket is made out of (14SWG ) 304 grade S.S Sheet . Side support is made out of 65 mm OD S.S rods . Handle rod is provided for easily tilting the vessel 100 Litres. Capacity Sambar ve ssel size : 20" ODx 20" height	BI01010001010000000000000515BI0100001146	2	Each
36	4.04	Frame vessels stands Vessels stand are made out 2" OD S.S pipes and 8 mm S.S Plates for mounting 5 No Vessels	BI01010001010000000000000515BI0100001147	6	Each
37	4.05	240 Nos Capacity Idly box It is made out of 18 SWG 304 grade S.S sheet . Each chamber contains three trays and makes 60 Idly . Four Chambers make 240 Idly in one time within 10 minuts . No: of trays (12 +3 ) with S.S stands.	BI01010001010000000000000515BI0100001148	1	Each
38	4.06	Steam line materials 3/4" G.I.C class pipe for steam line , GI elbow , T and ball valves	BI01010001010000000000000515BI0100001149	50	RFT
39	4.07	Steam Line Erection Charges	BI01010001010000000000000515BI0100001150	1	LSM
40	4.08	Masonry work for platform and fixing steam utensils. Fixing on the ground and basement works (15ft x 6Ft) No tiling required. Drain in cement with grout finish for waste water.	BI01010001010000000000000515BI0100001151	1	LSM
41	4.09	Chapathy machine Semi Automatic 2000 Chappathy per Hour. Single Phase 1HP Motor. Uncooked Chappathy	BI01010001010000000000000515BI0100001152	1	Each
42	4.1	Commercial Atta Kneader 230-440V 20Kg	BI01010001010000000000000515BI0100001153	1	Each
43	4.11	SS Tumbler 300 ML	BI01010001010000000000000515BI0100001154	300	Each
44	4.12	SS Meals Plate 4 compartment	BI01010001010000000000000515BI0100001155	300	Each
45	4.13	Dinner Set with plates and Bowl 33 Piece Porcelean	BI01010001010000000000000515BI0100001156	10	Each
46	4.14	Plate racks fabricated in Steel Tube with painting. 4 Rack	BI01010001010000000000000515BI0100001157	2	Each
47	4.15	Food Placing Table inside Mess Hall Stainless Steel 2 shelve	BI01010001010000000000000515BI0100001158	2	Each
48	4.16	Gas Pipe line works - 25 Mtrs -with pipes, fittings, connectors, outlets and inlets	BI01010001010000000000000515BI0100001159	1	LSM
49	4.17	Gas Stove 2 Burner for Kitchen Fabricated in Steel	BI01010001010000000000000515BI0100001160	2	Each
50	4.18	Wet Grinder with heavy stand tiltable motor of capacity 1.5 hp Equipped with grinding capacity of 15L Robust design and sturdy construction aids longer service life Hassle free operations, easy handling and setup	BI01010001010000000000000515BI0100001161	2	Each
51	4.19	Wet Grinder Non Tiliting, Stainless Steel drum, 5-7 Kg capacity. Single Phase Power Supply	BI01010001010000000000000515BI0100001162	1	Each
52	4.2	Heavy Duty Mixer Grinder with jar Ideal for both dry & wet grinding, Stainless Steel 2HP Motor	BI01010001010000000000000515BI0100001163	2	Each
53	4.21	Canteen Seating Stainless Steel Table with 6 stools seating foldable	BI01010001010000000000000515BI0100001164	10	Each
54	4.22	20L Stainless Steel Electric Water Catering Boiler	BI01010001010000000000000515BI0100001165	1	Each
55	4.23	Serving bowl with lid L23xB16xH22.5	BI01010001010000000000000515BI0100001166	10	Each
56	4.24	Plain Stainless Steel Water Jug with handle	BI01010001010000000000000515BI0100001167	20	Each
57	4.25	Serving spatulas, Rice spoons, lids and accessories	BI01010001010000000000000515BI0100001168	1	LOT
58	4.26	Stainless Steel Buckets Heavy Duty	BI01010001010000000000000515BI0100001169	10	Each
59	4.27	Steel Trolley (Painted) with handle and 3 racks for heavy duty application upto 300 kg weight. Wheels with foot lock brake.	BI01010001010000000000000515BI0100001170	1	Each
60	4.28	Stainless Steel Food serving trolley maximum 50 Kg support (3 Rack)	BI01010001010000000000000515BI0100001171	1	Each
61	4.29	Double Layered Water Tank, Food Grade, Antibacterial, UV Resistant, BPA-Free 1000 Litres	BI01010001010000000000000515BI0100001172	1	Each
62	4.3	Plumbing line works from tank in UPVC and GI pipe (boiler)	BI01010001010000000000000515BI0100001173	1	LOT
63	4.31	Platform for watertank in RCC after earth levelling (2.2 x 2.2 x 0.20)	BI01010001010000000000000515BI0100001174	1	LSM
64	4.32	Supply,installation testing and commissioning of exhuast fan including wiring with 2.5sqmm FRLS pvc insulated,copper conductor, single core cable etc..as required.380mm light duty exhuast fan working on 230v A/C	BI01010001010000000000000515BI0100001175	6	Each
65	4.33	Supply and fixing of high purification RO water purifier.purification production rate 80L/hr.Max duty cycle 400L/day.net weight 25kg	BI01010001010000000000000515BI0100001176	2	Each
66	5	Electrification	BI01010001010000000000000515BI0100001177
67	5.01	Wiring for light point/ fan point/ exhaust fan point/ call bell point\nwith 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.	BI01010001010000000000000515BI0100001178
68	5.011	Group A(1.10.1 )	BI01010001010000000000000515BI0100001179	23	point
69	5.02	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed\nconduit as required.	BI01010001010000000000000515BI0100001180
70	5.021	25 mm (1.21.2)	BI01010001010000000000000515BI0100001181	50	mtr
71	5.03	Supplying and fixing of following sizes of medium class PVC casing and capping	BI01010001010000000000000515BI0100001182
72	5.031	25 mm (LMR)	BI01010001010000000000000515BI0100001183	40	mtr
73	5.04	Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (RoHS compliant )(90.10.1)	BI01010001010000000000000515BI0100001184
74	5.041	1 or 2 Module	BI01010001010000000000000515BI0100001185	14	each
75	5.042	8 Module	BI01010001010000000000000515BI0100001186	2	each
76	5.05	Supplying and fixing following Modular base & cover plate on\nexisting modular metal boxes etc. as required.(1.28)	BI01010001010000000000000515BI0100001187
77	5.051	1 or 2 Module	BI01010001010000000000000515BI0100001188	14	each
78	5.052	8 Module	BI01010001010000000000000515BI0100001189	2	each
79	5.06	Wiring for circuit/ submain wiring alongwith earth wire with the\nfollowing sizes of FRLS PVC insulated copper conductor, single\ncore cable in surface/ recessed medium class PVC conduit as\nrequired.(1.14)	BI01010001010000000000000515BI0100001190
80	5.061	2 X 4 sq. mm + 1 X 4 sq. mm earth wire (1.14.3)	BI01010001010000000000000515BI0100001191	35	mtr
81	5.062	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire(1.14.2)	BI01010001010000000000000515BI0100001192	40	mtr
82	5.07	Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.(1.17)	BI01010001010000000000000515BI0100001193
83	5.071	2 x 1sq. mm(LMR)	BI01010001010000000000000515BI0100001194	200	mtr
84	5.072	3 x 4 sq. mm(1.17.21)	BI01010001010000000000000515BI0100001195	80	mtr
85	5.073	2 x 2.5 sq. mm(1.17.11)	BI01010001010000000000000515BI0100001196	100	mtr
86	5.074	3 x 2.5 sq. mm(1.17.12)	BI01010001010000000000000515BI0100001197	50	mtr
87	5.08	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(1.24)	BI01010001010000000000000515BI0100001198
88	5.081	5/6 A switch(1.24.1)	BI01010001010000000000000515BI0100001199	2	each
89	5.082	3 pin 5/6 A socket outlet(1.24.4)	BI01010001010000000000000515BI0100001200	2	each
90	5.083	15/16 A switch	BI01010001010000000000000515BI0100001201	14	each
91	5.084	6 pin 15/16 A socket outlet	BI01010001010000000000000515BI0100001202	8	each
92	5.09	Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required (90.11.1.10)	BI01010001010000000000000515BI0100001203
93	5.091	4 way (8+12) - three phase double cover (IP 42/43)	BI01010001010000000000000515BI0100001204	1	each
94	5.1	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C”\ncurve, miniature circuit breaker suitable for inductive load of\nfollowing poles in the existing MCB DB complete with\nconnections, testing and commissioning etc. as required.\n	BI01010001010000000000000515BI0100001205
95	5.101	Single pole(2.10.1)	BI01010001010000000000000515BI0100001206	6	each
96	5.11	Supplying and fixing following rating, four pole, 415 V, isolator in\nthe existing MCB DB complete with connections, testing and\ncommissioning etc. as required.	BI01010001010000000000000515BI0100001207
97	5.111	63 A (2.13.2)	BI01010001010000000000000515BI0100001208	1	each
98	5.12	Supplying and fixing following rating, four pole, (three phase\nand neutral), 415 V, residual current circuit breaker (RCCB),\nhaving a sensitivity current 30 mA in the existing MCB DB\ncomplete with connections, testing and commissioning etc. as\nrequired.	BI01010001010000000000000515BI0100001209
99	5.121	40A(2.15.2)	BI01010001010000000000000515BI0100001210	1	each
100	5.13	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.(5.4)	BI01010001010000000000000515BI0100001211	1	each
101	5.14	Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.Standard make and ISI Marked	BI01010001010000000000000515BI0100001212
102	5.141	3.15 mm copper conductor (10 SWG)(LMR)	BI01010001010000000000000515BI0100001213	50	mtr
103	5.15	Supply and installation of 9W LED bulb. (Make: Philips/Crompton/equivalent)Standard make and ISI Marked(LMR)	BI01010001010000000000000515BI0100001214	2	each
104	5.16	LED tube light fitting suitable for single 20 W T5 lamp with lamp\nholder, APF electronic ballest suitable for continious operation with THD\n<10%, power factor >0.98, RoHS compliant, duly wired up for use on\n230 V AC supply without fluorescent tubes. The fittings shall be made\nfrom CRCA MS sheet of minimum thickness 0.50 mm nominal thickness\ninside and outside.(Make: Philips/Crompton/equivalent)Standard make and ISI Marked(LMR)	BI01010001010000000000000515BI0100001215	15	each
105	5.17	Supply and installation 1200 mm sweep- 5 star rated Ceiling fan, complete with 300mm down\nrod, canopies, shackles and blades and resistance type regulator\nworking on 230/240V single phase A/CStandard make and ISI Marked(LMR)\n	BI01010001010000000000000515BI0100001216	2	each
106	5.18	Supplying and fixing brass batten/ angle holder including\nconnections etc. as required.	BI01010001010000000000000515BI0100001217	2	each