Corrigendum - Tender For Purchase Of Laboratory And Office Furniture, IISER KOLKATA-West Bengal

Corrigendum - Tender For Purchase Of Laboratory And Office Furniture - 1 Laboratory Table With Granite Top With Single Rack: Nsize: 54” Length X 30” Width X 36” Height. Nproviding And Placing Laboratory Table With Granite Top As Per Following Specification. Table Top Must Be Rested On A Framing Work All Around And A Middle Support Placed Width Wise. The Whole Structure Will Be Rested On Four Legs. The Section Of Frame Should Be 35Mm X 35Mm And Section Of Legs Should Be 35Mm X 35Mm Made Of Ms 16Gauge Hollow Type. The Remaining ½ Back Portion Of Table Will Be Used As An Open Rack With One Shelve. Total Structure And Body Of The Cabinet Should Be Epoxy Powder Coated ( 7 Tanks ) By Grey And Blue Colour. 02Mm Rubber Pad Will Be Fitted On The Top Of The Table Along With 18Mm Polished Granite Slab. N 2 Laboratory Workstation Table With Granite Top And Chemical Holding Rack: Nsize: 240” Length X 48” Width X 31” Height. Nan Arrangement For 12 Persons Consists Of Free Standing Desk System Based Designed To Promote Team Work And Easy Communication In Laboratory. The 06 Back To Back Workstation ( 40” X 24” ) Table Top Must Be Rested On A Framing Work All Around And A Middle Support Placed Width Wise. The Whole Structure Will Be Rested On Four Legs. The Section Of Frame Should Be 35Mm X 35Mm And Section Of Legs Should Be 35Mm X 35Mm Made Of Ms 16Gauge Hollow Type. The Individual Table Consist Of Channel Fitted One No. Drawer ( With Locking Arrangement ) Of 6”X15”X14” ( Approx ) And One Cabinet With One Shelves ( With Locking Arrangement ) At Bottom As Per Standard Design. Drawer & Cabinet Should Made Of Ms Sheet Having Thickness Of 20 Gauge. Cabinet Doors Must Open Front Side. The Remaining ½ Portion Of Table Will Be Used Of Lag Space, All Table Should Be Fitted On Additional Rack ( Size: 40”Length X 9” Width X 2’-6”Height ) Fitted On The Table, Made Of Square Ms Frame ( 2”X2’ ) 16Gaug Hollow Type Along With Open Ms Shelve. Total Structure And Body Of The Cabinet Should Be Epoxy Powder Coated ( 7 Tanks ) By Grey And Blue Colour. 02Mm Rubber Pad Will Be Fitted On The Top Of The Table Along With 18Mm Polished Granite Slab. Electrical Provision Will Be Provided On The Table Top On The Raceway With Switch Plate Cut Out As Per Your Requirement. N 3 Laboratory Table With Granite Top: Nsize: 108” Length X 36” Width X 36” Height. Nproviding And Placing Laboratory Table With Granite Top As Per Following Specification Table Top Must Be Rested On A Framing Work All Around And A Middle Support Placed Width Wise. The Whole Structure Will Be Rested On Four Legs. The Section Of Frame Should Be 35Mm X 35Mm And Section Of Legs Should Be 35Mm X 35Mm Made Of Ms 16Gauge Hollow Type. There Will Be Channel Fitted Drawer ( With Locking Arrangement ) Of 6”X18”X18” ( Approx ) And One Cabinet With One Shelves ( With Locking Arrangement ) At Bottom As Per Standard Design. Drawer & Cabinet Should Made Of Ms Sheet Having Thickness Of 20 Gauge. Cabinet Doors Must Open Front Side. 02’ Gap Exist Middle Portion Of The Table. The Total Structure And Body Of The Cabinet Should Be Epoxy Powder Coated ( 7 Tanks ) By Grey And Blue Colour. 02Mm Rubber Pad Will Be Fitted On The Top Of The Table Along With 18Mm Polished Granite Slab. Electrical Provision Will Be Provided On The Table Top On The Raceway With Switch Plate Cut Out As Per Your Requirement. N 4 Laboratory Table With Sink: Nsize: 36” Length X 30” Width X 36” Height. Nproviding And Placing Laboratory Table With Sink As Per Following Specification Table Top Must Be Rested On A Framing Work All Around And A Middle Support Placed Width Wise. The Whole Structure Will Be Rested On Four Legs. The Section Of Frame Should Be 35Mm X 35Mm And Section Of Legs Should Be 35Mm X 35Mm Made Of Ms 16Gauge Hollow Type. One Additional Sink ( 28” X 18” ) Fitted On Middle Portion Of The Table. The Total Structure And Body Of The Cabinet Should Be Epoxy Powder Coated ( 7 Tanks ) By Grey And Blue Colour. 02Mm Rubber Pad Will Be Fitted On The Top Of The Table Along With 18Mm Polished Granite Slab. N 5 Laboratory Table With Granite Top: Nsize: 123” Length X 33” Width X 36” Height. Nproviding And Placing Laboratory Table With Granite Top As Per Following Specification Table Top Must Be Rested On A Framing Work All Around And A Middle Support Placed Width Wise. The Whole Structure Will Be Rested On Six Legs. The Section Of Frame Should Be 35Mm X 35Mm And Section Of Legs Should Be 35Mm X 35Mm Made Of Ms 16Gauge Hollow Type. There Will Be Channel Fitted One No. Drawer ( With Locking Arrangement ) Of 6”X18”X18” ( Approx ) And One Cabinet With One Shelves ( With Locking Arrangement ) At Bottom As Per Standard Design. Drawer & Cabinet Should Made Of Ms Sheet Having Thickness Of 20 Gauge. Cabinet Doors Must Open Front Side. Total Structure And Body Of The Cabinet Should Be Epoxy Powder Coated ( 7 Tanks ) By Grey And Blue Colour. 02Mm Rubber Pad Will Be Fitted On The Top Of The Table Along With 18Mm Polished Granite Slab. Electrical Provision Will Be Provided On The Table Top On The Raceway With Switch Plate Cut Out As Per Your Requirement. N 6 Laboratory Table With Granite Top: Nsize: 30” Length X 30” Width X 36” Height. Nproviding And Placing Laboratory Table With Granite Top As Per Following Specification Table Top Must Be Rested On A Framing Work All Around And A Middle Support Placed Width Wise. The Whole Structure Will Be Rested On Six Legs. The Section Of Frame Should Be 35Mm X 35Mm And Section Of Legs Should Be 35Mm X 35Mm Made Of Ms 16Gauge Hollow Type. There Will Be Channel Fitted Two No. Drawer ( With Locking Arrangement ) Of 6”X18”X18” ( Approx ) And One Cabinet With One Shelves ( With Locking Arrangement ) At Bottom As Per Standard Design. Drawer & Cabinet Should Made Of Ms Sheet Having Thickness Of 20 Gauge. Cabinet Doors Must Open Front Side. Total Structure And Body Of The Cabinet Should Be Epoxy Powder Coated ( 7 Tanks ) By Grey And Blue Colour. 02Mm Rubber Pad Will Be Fitted On The Top Of The Table Along With 18Mm Polished Granite Slab. N 7 Office Table With Wooden Top: Nsize: 36” Length X 30” Width X 36” Height. Nproviding And Placing Laboratory Table With Wooden Top As Per Following Specification Table Top Must Be Rested On A Framing Work All Around And A Middle Support Placed Width Wise. The Whole Structure Will Be Rested On Four Legs. The Section Of Frame Should Be 35Mm X 35Mm And Section Of Legs Should Be 35Mm X 35Mm Made Of Ms 16Gauge Hollow Type. There Will Be Channel Fitted One No. Drawer ( With Locking Arrangement ) Of 6”X18”X18” ( Approx ) And One Cabinet With One Shelves ( With Locking Arrangement ) At Bottom As Per Standard Design. Drawer & Cabinet Should Made Of Ms Sheet Having Thickness Of 20 Gauge. Cabinet Doors Must Open Front Side. Total Structure And Body Of The Cabinet Should Be Epoxy Powder Coated ( 7 Tanks ) By Grey And Blue Colour. N 8 Laboratory Table With Granite Top With Power Backup Provisions Nsize: 72” Length X 30” Width X 36” Height. Nproviding And Placing Laboratory Table With Granite Top As Per Following Specification. Table Top Must Be Rested On A Framing Work All Around And A Middle Support Placed Width Wise. The Whole Structure Will Be Rested On Four Legs. The Section Of Frame Should Be 35Mm X 35Mm And Section Of Legs Should Be 35Mm X 35Mm Made Of Ms 16Gauge Hollow Type. The Remaining ½ Back Portion Of Table Will Be Used As An Open Rack With One Shelve. Total Structure And Body Of The Cabinet Should Be Epoxy Powder Coated ( 7 Tanks ) By Grey And Blue Colour. 02Mm Rubber Pad Will Be Fitted On The Top Of The Table Along With 18Mm Polished Granite Slab. Electrical Provision Will Be Provided On The Table Top On The Raceway With Switch Plate Cut Out As Per Your Requirement. Npower Backup Accessories: Online Sine Wave 10Kva 3Ph / 1Ph Ups ( Three Phase Input / Single Phase Output ) With Inbuilt Isolation Transformer At Ups Output And External Isolation Transformer At The Input Of Ups With 12V Smf Battery To Provide 30Mins Backup And Connecting Cables Along With Accessories. Vdc: 240 Vdc Battery:12V / 26Ah X 20 Nos Battery. N 9 Wall Mount Adjustable Chemical Rack: Nsupply Of Adjustable Steel Single Faced Rack Made Of 22 Gauge Ms Sheet Having Shelve, Dies Angular Plate, 14 Gauge Adjustable Slotted Angel, 20 Gauge Shelves And Epoxy Painted. N 10 A ) Size: 96 ( H ) X 16 ( W ) X 120 ( L ) ( Seven Shelve ) 11 B ) Size: 96 ( H ) X 16 ( D ) X 36 ( W ) ( Six Shelve ) 12 C ) Size: 30 ( H ) X 12 ( D ) X 36 ( W ) ( Two Shelve ) 13 Chair: Nproviding & Placing Computer Chair Consists Of Seat Size 15”X15”, 2” Density Rubber Made Upholstery Covered With Synthetic Leather Or Polirich Fabric With 5Nos. Ms Special Castor Wheels Fitted Legs Including Gas Lift Height Adjustment Facility Attached With Sinero Lifting System, Pu Armrest Etc. Overall Height Of The Chair From Ground Level 32”. N 14 Revolving Stool: Nproviding & Placing Revolving Stool Consists Of Overall Height 38” From Ground Level, Seat Size 12” Diameter Along With Upholstery Made Of 2” High Density Rubber Covered With Synthetic Leather, Back Rest With 1” 16 Swg Crc Round Pipe With Padded Upholstery, Foot Ring Is Attached To The Bottom Portion Of The Stool And 4” Dia 16 Swg Hollow Crc Pipe Made Middle Base Frame Work With Gas Lift Height Adjustable Facility Etc. All Complete As Per Direction. N 15 Office Steel Book Shelve: Nsize 66” Height X 33” Wide X 15” Depth. N4 No: 4Mm Glass Fitted Sliding Door With Machine Made Frame With 1”Side Bending.20 Swg Crc Steel Made Structure With ( Six Liver ) Individual Locking Arrangement With S.S Flat Key In Duplicate ( Set Locking Key ) . N 16 Battery Rack: Nsize: 36 ( H ) X 12 ( W ) X 72 ( L ) Nbattery Rack Having Three Shelve Two Compartment , Dies Angular Plate, 14 Gauge Slotted Angel, 20 Gauge Shelves Total Structure And Shelve Of The Rack Should Be Epoxy Powder Coated ( 7 Tanks ) Colour. N 17 Cylinder Hoder Clamp: Nthe Whole Structure Will Be Made Of Ms Sheet Having Thickness Of 20 Gauge, The Rack Should Be Epoxy Powder Coated ( 7 Tanks ) Colour. N

Refer document

INR 25000.0 /-

Refer document