Jamia Millia Islamia-JMI has published White Washing , Oil Bound Distempering And Painting At Faculty Of Low Whole Building At Jamia Millia Islamia. Submission Date for this Tender is 24-12-2019. Painting Tenders in MM Ali Jauhar Marg, JMI, New Delhi Delhi. Bidders can get complete Tender details and download the document.
| Name of Work: White washing, Oil bound distempering and Painting at Faculty Of Law whole building, Jamia Millia Islamia | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 2 | CIVIL WORK | |||
| 2 | 3 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified._2 mm thick flat | Item1 | 20 | sqm |
| 3 | 4 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete._On steel work | Item2 | 1481.23 | sqm |
| 4 | 5 | White washing with lime to give an even shade_Old work (two or more coats) | Item3 | 5356.87 | sqm |
| 5 | 6 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade_Old work (one or more coats) | Item4 | 8865.39 | sqm |
| 6 | 7 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Item5 | 4400 | sqm |
| 7 | 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade_One or more coats on old work | Item6 | 303.88 | sqm |
| 8 | 9 | Finishing walls with textured exterior paint of required shade_Old work (One or more coats) applied @ 1.82 ltr/10 sqm. | Item7 | 6038.37 | sqm |
| 9 | 10 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge._With cement mortar 1:4 (1 cement : 4 fine sand) | Item8 | 30 | sqm |
| 10 | 11 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:_Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) | Item9 | 25 | sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
