Provisioning Of Officers Toilet Facility At Power House, Toilet Facility Near Helipad, Qty 03 Attached Toilets For Cto, Coo And Co 782 (Los) And Misc B/R Works, Special Repairs To Existing Bore Wells, Replacement Of Chain Link Fence And Concertina Coil At
Tender Value
29 Lakhs
Estimated cost
Bid Submission
08 Jan 2020
0 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
SAMANA → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provisioning Of Officers Toilet Facility At Power House, Toilet Facility Near Helipad, Qty 03 Attached Toilets For Cto, Coo And Co 782 ( Los ) And Misc B / R Works, Special Repairs To Existing Bore Wells, Replacement Of Chain Link Fence And Concertina Coil At Various Locations At Af Stn Saman Under Ge ( Af ) Jamnagar No. 1
BOQ
| Name of Work: PROVISIONING OF OFFICERS TOILET FACILITY AT POWER HOUSE, TOILET FACILITY NEAR HELIPAD, QTY 03 ATTACHED TOILETS FOR CTO, COO AND CO 782 (LOS) AND MISC B/R WORKS, SPECIAL REPAIRS TO EXISTING BOREWELLS, REPLACEMENT OF CHAIN LINK FENCE AND CONCERTINA COIL AT VARIOUS LOCATIONS AT AF STN SAMAN UNDER GE (AF) JAMNAGAR No.1 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out soft / loose soil complete.\n\n | 50 | Sqm | |
| 2 | 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft / loose soil.\n\n | 37 | Cum | |
| 3 | 3 | M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.\n\n | 31 | Cum | |
| 4 | 4 | M&L for cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.\n\n | 20 | Cum | |
| 5 | 5 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick using excavated soil all complete all as directed.\n\n | 27 | Cum | |
| 6 | 6 | Removing excavated soil to a distance exc 250 m but n exc 500 m and depositing where directed at a level of n.exc 1.5 m above the starting point all complete all as directed.\n\n | 22 | Cum | |
| 7 | 7 | Cutting opening in cement concrete walls (any description)\nfor door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc.with or without reinforcement complete\n\n | 2 | Cum | |
| 8 | 8 | Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams and similar works for flat rough finished surface complete all as directed.\n\n | 45 | Sqm | |
| 9 | 9 | M&L for RCC design mix M-30 grade, using 20 mm graded stone aggregate as in foundation, footings, plinth Beam and similar RCC works all as specified and directed.\n\n | 6 | Cum | |
| 10 | 10 | Use & waste form work to sides of pillars, posts and columns for rough finished surface square/rectangular of concrete complete all as directed.\n\n | 28 | Sqm | |
| 11 | 11 | M&L for RCC design mix M-30 grade, using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts & similar RCC works all as specified and directed.\n\n | 3 | Cum | |
| 12 | 12 | Use & waste of Form work to sides and soffits of floor or roof beams,lintiles cantilever etc for flat rough finished surface complete all as directed.\n\n | 50 | Sqm | |
| 13 | 13 | M&L for RCC design mix M-30 grade, using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels & similar RCC works all as specified and directed.\n\n | 4 | Cum | |
| 14 | 14 | Use & waste of Form work to soffits of suspended slabs such as roof slabs, floor slab, landing and similar work for flat rough finished surface complete all as directed.\n\n | 60 | Sqm | |
| 15 | 15 | M&L for RCC design mix M-30 grade, using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like & similar RCC works all as specified and directed.\n\n | 7 | Cum | |
| 16 | 16 | Use & waste of Form work to edges of suspended slabs n.exc 20 cm thickness for fair finished surface complete all as directed.\n\n | 50 | RM | |
| 17 | 17 | M & L for precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) set in CM 1:6 complete in wall or pillars all as specified and directed.\n\n | 64 | Cum | |
| 18 | 18 | M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded aggregate as in cover slabs for manholes.\n\n | 2 | Cum | |
| 19 | 19 | M&L for steel reinforcement of TMT bars (Fe-500 Grade) 10 mm dia and over cut to length and bent to shape required including cranking, bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.\n\n | 950 | Kg | |
| 20 | 20 | M&L for steel reinforcement of TMT bars (Fe-500 Grade) 6 to 8 mm dia cut to length and bent to shape required including cranking, bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.\n\n | 550 | kg | |
| 21 | 21 | M&L for steel reinforcement of TMT bars (Fe-500 Grade) not exc 8 mm dia as in stirrups cut to length and bent to shape required including cranking, bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed.\n\n | 450 | Kg | |
| 22 | 22 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surface of slab, beam & ceiling surfaces finished even and fair all as specified and directed.\n\n | 80 | Sqm | |
| 23 | 23 | M&L for rendering 15 mm thick on brick wall or concrete surface in cement mortar 1:4 finished even & fair all as specified and directed.\n\n | 465 | Sqm | |
| 24 | 24 | M&L for rendering 10 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:6 finished even & fair all as specified and directed.\n\n | 200 | Sqm | |
| 25 | 25 | M&L for preparation of plastered surface of walls including plaster / cornices etc and applying two coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved over one coat of primer applied as per manufacturer's instruction complete.\n\n | 465 | Sqm | |
| 26 | 26 | M&L for preparation of plastered surface of walls including plaster / cornices etc and applying two coats of oil bound distemper over one coat primer over and including one coat of cement base wall care putty applied as per manufacturer's instruction complete.\n\n | 400 | Sqm | |
| 27 | 27 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed by Engineer-In-Charge.\n\n | 80 | Sqm | |
| 28 | 28 | M&L for moorum filling in floors or paving laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering & well ramming complete all all as directed .\n\n | 18 | Cum | |
| 29 | 29 | Hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface.\n\n | 6 | Cum | |
| 30 | 30 | M&L for 100 mm thick plain cement concrete 1:4:8 type B2, using 40 mm graded stone aggregate, as in sub base to floors and paving etc all complete all as directed.\n\n | 75 | Sqm | |
| 31 | 31 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified.\n\n | 60 | Sqm | |
| 32 | 32 | M&L for joint free (edgecut) digital printed coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) polished area of each tile exc 0.11 Sqm but n. exc 0.18 sqm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.\n\n | 180 | Sqm | |
| 33 | 33 | M&L for outdoor coloured vitrified ceramic paving tiles, joint free (edge cut) of size 300 mm x 300 mm x 8 to 10 mm thick as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete. \nMake - HR Johnson - Endura series or equivalent type of make mention in Appx 'B'\n\n | 80 | Sqm | |
| 34 | 34 | M&L for 75 mm thick plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate as in plinth protection surfaces finished even and smooth without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:1 by weight complete all as directed.\n\n | 25 | Sqm | |
| 35 | 35 | M&L for 18 to 20 mm thick pre polished Green marble slab, machine cut bedded, jointed with neat cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match as in window cill, risers / Treads of steps over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.\n\n | 7 | Sqm | |
| 36 | 36 | S&F aluminium powder coated (powder coating shall not be less than 50 micron of approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position complete. \n\n | 3 | Sqm | |
| 37 | 36.01 | Note:-\n(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B\n\n | |||
| 38 | 37 | M&L for preparation of new steel surfaces exc 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of aluminium red oxide primer all as specified.\n\n | 66 | Sqm | |
| 39 | 38 | M&L for screed bed 10 mm thick on concrete surface over roof in cement mortar (1:4) finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer's instruction complete all as specified and as directed.\n \nNote:- WPC will be measured & Paid separately\n\n | 120 | Sqm | |
| 40 | 39 | Material and labour for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg / Sqm with brush / roller, laying of 3 mm thick APP based polymer modified membrane (mineral finish) reinforced non-woven polyester, weight not less than 3.50 Kg / Sqm and sealing all the over laps 100 mm in length side and 100 mm in width side of membranes laid with torch application complete all as specified and as directed.\n\n | 120 | Sqm | |
| 41 | 40 | Supply only Liquid water proofing compound\n\n | 3 | Litre | |
| 42 | 41 | M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete. \n\n | 80 | RM | |
| 43 | 42 | S&F 15 mm bore GI tubing medium grade including all fittings & fixture fixed to walls and ceilings or laid in floors complete all as specified and directed.\n\n | 80 | RM | |
| 44 | 43 | S&F 20 mm bore GI tubing medium grade including all fittings & fixture fixed to walls and ceilings or laid in floors complete all as specified and directed.\n\n | 24 | RM | |
| 45 | 44 | S&F cast iron floor trap 100 mm dia of outlet, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate complete. \n\n | 8 | Each | |
| 46 | 45 | S & F 125 mm x 125 mm Salt-glazed stoneware gully traps, square or round mouthed, type 'P' including PCC 1:3:6 type C1 for surround concrete.\n\n | 5 | Each | |
| 47 | 46 | S&F 75 mm dia Cast iron sand cast iron pipe, for soil, waste and vent in any length , laid in trenches, with cement joints, complete.\n\n | 26 | RM | |
| 48 | 47 | S&F 100 mm dia Cast iron sand cast iron pipe, for soil, waste and vent in any length , laid in trenches, with cement joints, complete.\n\n | 26 | RM | |
| 49 | 48 | S&F 75 mm dia bore Cast iron oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete.\n\n | 5 | Each | |
| 50 | 49 | S&F 100 mm dia bore CI oval access door bend (any radius) diminishing pieces or tapers (Larger bore measured) complete.\n\n | 5 | Each | |
| 51 | 50 | Supply and fix 100 mm cast iron Cowls.\n\n | 5 | Each | |
| 52 | 51 | Supply and fix 100 mm dia Sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete.\n\n | 15 | RM | |
| 53 | 52 | M&L for providing 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars.\n\n | 80 | RM | |
| 54 | 53 | M&L for Concrete bed to drain pipes type C2 1:4:8 bore of pipe 150 mm including packing under, and haunching against the sides of pipes after they are laid and tested\n\n | 80 | RM | |
| 55 | 54 | Supply and fix 500 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.\n\n | 5 | Each | |
| 56 | 55 | S&F 20 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.\n\n | 5 | Each | |
| 57 | 56 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.\n\n | 40 | RM | |
| 58 | 57 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, fixing to frame with 100 mm stainless steel hinges at site as per specification & drawing.\n\n | 22 | Sqm | |
| 59 | 58 | M&L for 150mm long aluminium handles fabricated type anodised all as specified.\n\n | 20 | Each | |
| 60 | 59 | M&L for 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed.\n\n | 30 | Each | |
| 61 | 60 | M&L for 150 mm aluminium anodised barrel tower bolts of extruded section and fixed.\n\n | 20 | Each | |
| 62 | 61 | S&F white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete.\n\n | 5 | Each | |
| 63 | 62 | Supply and fix 10 Litre capacity PVC syphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete.\n\n | 5 | Each | |
| 64 | 63 | S&F 15 mm size two way bib taps cast copper alloy, chromium plated, fancy type, screwed for iron pipes complete.\n\n\n | 5 | Each | |
| 65 | 64 | S&F 15 mm size bib taps cast copper alloy, chromium plated, fancy type, screwed for iron pipes complete.\n\n\n\n | 15 | Each | |
| 66 | 65 | S&F Angular stop cock cast copper alloy fancy type chromium plated fixed to pipe complete all as specified.\n\n\n | 15 | Each | |
| 67 | 66 | S&F PVC connections 15mm size with PTMT nuts of length 450mm.\n\n | 10 | Each | |
| 68 | 67 | S&F Toilet Roll holder fixed to wall complete all as specified.\n\n\n | 5 | Each | |
| 69 | 68 | S&F Health faucet (ABS Body) with 1 meter long PVC tube & wall hook complete.\n\n\n\n | 5 | Each | |
| 70 | 69 | Supply and fix white vitreous China wash hand basin (Flat back) of size 580 x 450 mm fixed on and including brackets complete including 15 mm size pillar tap, cast copper alloy, chromium plated with capstan head, screwed down high Pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, screwed for iron pipe, 32 mm size brass chromium plated waste coupling, 750 mm long PVC waste pipe, PVC connection pipe, 15 mm size and 450 mm long with PTMT nuts and washer at both end etc complete. \n\n | 5 | Each | |
| 71 | 70 | S&F 6 mm thick looking mirror of selected quality glass, diamond polished edge, fixed on wall with stainless steel stud complete \n\n | 3 | Sqm | |
| 72 | 71 | Supply and fix single towel rail 600 mm long fixed to wall complete all as specified.\n | 5 | Each | |
| 73 | 72 | S&F Vitreous China bowl urinal flat back, size\nof 465 mm x 355 mm x 265 mm white (minimum),\nwith grating and union for discharge pipe\ncomplete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 secured to plugs with and including 60 mm long brass screws pointing around urinal back in white cement complete.\n\n\n\n | 5 | Each | |
| 74 | 73 | S&F urinal spreader of brass chromium plated suitable for 15mm dia pipe complete.\n\n | 5 | Each | |
| 75 | 74 | Dismantling of chain link fencing of any description from post including line wire etc complete.\n\n | 2300 | Sqm | |
| 76 | 75 | Dismantling post or struts RCC any section including taking out concrete embedded portion and making good disturbed ground.\n\n | 1360 | RM | |
| 77 | 76 | Dismantling wrought iron or mild steel work of any description not other wise provided for.\n\n | 12.5 | Qtl | |
| 78 | 77 | Supply and fix hot dip galvanised mild steel section for post and struts for fencing including cutting top to shape as directed, drilling hole, notching for wire etc.or flat iron fillet (for securing wire mesh etc)including all necessary drilling bolting, using steel section of grade E-165 ( Fe-290) complete.\n\n\n | 6400 | Kg | |
| 79 | 77.01 | Note:-\nMeasurement shall be carried out for weight of steel section without galvanising, i.e. without considering any increase in weight due to galvanising. \n\n | |||
| 80 | 78 | Supply only chain link fencing made out of mild steel galvanised wire, conforming to IS 2721 all as specified & directed. \n\nNote:- Fixing only fencing will be measured and paid separately.\n\n | 5700 | Kg | |
| 81 | 79 | Fixing only chain link fencing of description fixed to steel post with mild steel flat & nut bolt etc.\n\nNote:\n(I) Supply only fencing will be measured and paid separately.\n\n(ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately.\n\n | 2300 | Sqm | |
| 82 | 80 | S&F hot dip galvanised Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long & dia of shank 11 to 15 mm long.\n\n | 460 | Kg | |
| 83 | 81 | Supply and fix hot dip galvanised 6 mm dia mild steel round bar as in line wire for chain link fencing fixed with GI wire complete all as directed.\n\n | 250 | KG | |
| 84 | 81.01 | Note:-\nMeasurement shall be carried out for weight of steel section without galvanising, i.e. without considering any increase in weight due to galvanising. \n\n | |||
| 85 | 82 | S&F in repairs galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt .including .securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pins etc. as directed ( each line wire to be measured ) \n\n | 88 | 100 RM | |
| 86 | 83 | Supply and fix in repair mild steel galvanised punched type concertina coil of loop dia 1050 mm (dia of coil when up stretched) fixed to existing angle post strut and tying at three places i.e. two, bottom & one at top with 3.15 mm dia galvanised mild steel wire all as specified and directed by Engineer in Charge.\n\nNote:- \nThe punched type concertina coil shall be stretched to maintain the dia of up stretched coil as 1050 mm and number of circles as 52 per coil and shall cover 8 running metre per coil. \n\n | 700 | RM | |
| 87 | 84 | Excavation in post holes in soft / loose soil (or similar holes) each n.exc 0.5 cum, getting out, returning, refilling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil removing surplus soil to a distance n exc 50 m complete all as specified and directed.\n\n | 350 | Each | |
| 88 | 85 | Demolition of brick / stone / PCC block masonry built in cement mortar including all quoins, pillars, arches etc. including removal of debries to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed.\n\n | 20 | Cum | |
| 89 | 86 | Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km.\n\n | 2 | Cum | |
| 90 | 87 | M&L for Rubber moulded Chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, in white cement with pigment, set, jointed in neat cement slurry & pointed in coloured cement, as in floors, laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.\n\n | 15 | Sqm | |
| 91 | 88 | S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165\n\n | 350 | Kg | |
| 92 | 89 | Supply and fix / lay in trenches 25 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends / elbow, tee, union etc complete and connecting to water supply pipe line complete all as specified and as directed by Engineer-in-Charge. \n\n | 130 | RM | |
| 93 | 90 | S&F gun metal gate valves of size 25 mm bore ISI marked with iron wheel head screwed both ends for iron pipe and fixed, all as specified and directed .\n\n | 5 | Each | |
| 94 | 91 | Material & labour for cutting 25 mm bore GI water pipe line for making new connection by inserting GI Tee, including provision of GI union complete all as specified & directed.\n\n | 5 | Each | |
| 95 | 92 | Material & Labour for point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked, drawn through and including PVC capping & casing not less than 25 mm wide, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including pressed steel terminal box of suitable size with laminated white top sheet cover of 3.00 mm thick complete.\n\n | 22 | Point | |
| 96 | 93 | All as per item No 92 above but point wiring for one 5 Amps socket outlet on independent board controlled by one-way switch. \n\n | 5 | Point | |
| 97 | 94 | M&L Switch Piano type, white polycarbonate body, single pole, one way 6 amp, 230 V, including connecting complete.\n\n | 22 | Each | |
| 98 | 95 | S & F Switch socket combination out let 2 in 1 multipurpose 5 pin 5 Amps, flush type, 230 / 250 Volts complete. \n\n | 5 | Each | |
| 99 | 96 | M&L for Ceiling rose, 3 terminal polycarbonate body 6 Amps, 250 volts AC, including connecting complete.\n\n | 22 | Each | |
| 100 | 97 | Supply and fix Ventilating fan 300 mm sweep AC, 240 volts, metal body, fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable complete. \n\nMake Havells Cat No. Ventil Air - DSP or equivalent of Make mention Appendix B.\n\n | 6 | Each | |
| 101 | 98 | S&F energy efficient LED mirror fitting with built in LED & integral LED driver 14 watt, channel housing & diffuser with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge. \n\nMake :- Crompton Cat NoLCL-14-CDL or equivalent make mention in Appx B\n\n | 10 | Each | |
| 102 | 99 | S&F energy efficient LED tube light fitting with built in LED & integral LED driver 18 to 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge. \n\n | 7 | Each | |
| 103 | 100 | Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 2.5 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 2.5 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete.\n\nNote: \n2 Runs of main cable and one run earth wire with conduit will be measured as one RM for payment.\n\n | 95 | RM | |
| 104 | 101 | S&F distribution board (DB), single door (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 250 Volts, flush to wall complete all as specified and directed.\n\n | 4 | Each | |
| 105 | 102 | Supply and fix MCB’s single pole 6-32 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.\n\n | 8 | Each | |
| 106 | 103 | Supply and fix MCB’s single pole & neutral 6-32 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.\n\n | 4 | Each | |
| 107 | 104 | S&F in repair Standard Automatic Star Delta Submersible Pump Starter unit of capacity 20 HP with on off switch Incorporating Heavy Duty 4 Pole contactor type TC1-DX, overload relay type LR3D/LR1D, Auto Start switch, 3 position selector switch for SPP Auto / SPP Manual / Manual, On / Off Rocker switch, voltmeter with selector switch suppressed scale ammeter, Motor ON & Trip LED Indicator as directed by Engr-in-charge\n\nMake:- Havells Cat No IHSASAP4*A or equivalent of make L&T / C&S, \n\n | 2 | Each | |
| 108 | 105 | Supply and fix in repair submersible cable flat , PVC insulated, PVC sheathed, multistranded copper conductor of size 10 Sqmm 3 core 1100 volt grade & connecting complete including taking down unserviceable cable.\n\n | 200 | RM |
AI Tender Summary
Tender Timeline
Dec 18, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedJan 08, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 09, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender