Public Works Department-PWD has published Construction Of Link Road On Bharoon Sandh To Nerti Via Lower Nerti ) ( Sh- Providing Laying Cement Concrete Pavement In Km . 0/0 To 0/400 And 1/280 To 1/480 ) ( Under Scsp ). Submission Date for this Tender is 02-01-2020. Road Work Tenders in Work Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: C/O link road on Bharoon Sandh to Nerti via Lower Nerti (Sub Head:- Providing and laying Cement concrete pavement in km.0/0 to 0/400 & 1/280 to 1/480) under SCSP. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing, laying spreading and compacting by mechanical means of stone aggregate size 63mm to 45mm (Sixty three millimetre to forty millimetre) Grading-II (75mm (Seventy five millimetre) consolidated thickness) to water bound macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (Eighty to Hundred)kN static roller in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (Eleven point two millimetre) nominal size at the rate of 0.20 (Zero point two zero cubic metres) per ten square metre and binding material at the rate 0.06 (Zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD technical specification clause 405 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government. | 33.75 | Per Cubic metre | |
| 2 | 2 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement thickness as per design, over a prepared sub base with 43 (forty three) grade cement M-30 (M-Thirty) grade, coarse and fine aggregate confirming to ISI :383 maximum size of coarse aggregate not exceeding 25mm (Twenty five millimetre) mixed in a concrete mixer of not less than 0.2 cum (Zero point Two) cubic metre capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron (One hundred twenty five micron) thick polythene film wedges, steel plates including levelling the form work as per drawing, spreading, the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridge/culvert and construction joints, admixture as approved curing of concrete slab, for 14 days using curing compound (where specified) and water finishing to lines and grade as per drawing and M.O.R.D. technical specification clause 1501 including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 337.5 | Per Cubic metre |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
