Bidhan Chandra Krishi Viswavidyalaya has published Supply , Installation And Demonstration Of Microprocessor Controlled Plant Growth Chamber. Submission Date for this Tender is 02-01-2020. Planting and Seeding Machinery Tenders in BCKV, MOHANPUR, NADIA West Bengal. Bidders can get complete Tender details and download the document.
| Name of Work: Supply, Installation and Demonstration of Microprocessor Controlled Plant Growth Chamber | ||||
|---|---|---|---|---|
| Item Description | Item Code / Make | Quantity | Units | |
| 1 | Microprocessor Controlled Plant Growth Chamber with Temperature, Light & Humidity Control Operated On 220v/50hz, CFC Free Refrigeration System\nTechnical Specification \nGrowth chamber volume: GMP, ISO & CE Certified at least 1000 L or more to be installed inside a room with double door to be used in microbiological and biological processes, Temperature range: 5°C-50°C with fluctuation not more than ± 0.5°C, Humidity: 50-95% RH (at 20-35°C) ±3% (at 60%), Illumination range 0 to 35000 lux or higher with control of 10 steps or more. The system should have minimum FL lamps 32W X 16nos or higher to achieve the desired illumination. Microprocessor PID controller, Temperature calibration and automatic tuning. The Temperature, humidity, and illumination profiles repeatable steps more than 900 cycles for long continuous operation. Designed to exhaust heated air through upper vent holes. Stable and long lasting lighting through introduction of high frequency electronic ballast lamps. Water level check indicated by water level bar in the tank. Water supply during operation must be there for long term test purposes. Detachable condenser air filter. Caster wheel for easy mobility during installation or relocation. Automatic alarm. Low and empty water level alarm. Power supply leakage breaker. Inner Chamber Material: Stainless steel 304 Grades. Exterior Construction: Stainless Steel 304 Grades. Inner door: Tempered safety glass with Silicone Packing. Shelves: minimum10nos. Refrigeration: minimum ¾ H.P. Temp. Heater Power(w): minimum 1500W x 2EA. 10 nos 32W FL lamps and 2 nos 400W metallamps as extra. 10 KVA online UPS as alternative power source. LUX and humidity measurement instrument for periodic checking.\nOther conditions\nThe system should be quoted with 2 years non-comprehensive AMC after expiry of standard warranty of 1 year. List of reputed users with certificates from the users. Must have post sales local service back up facilities so that problem could be attended within 48 hours (documents to be attached) | item1 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
