| 1 | 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in charge.\nA. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)\n | BI01010001010000000000000515BI0100001113 | 12 | cum |
|---|
| 2 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level.\nA. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)\n | BI01010001010000000000000515BI0100001114 | 12 | cum |
|---|
| 3 | 3 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001115 | 354 | sqm |
|---|
| 4 | 4 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). | BI01010001010000000000000515BI0100001116 | 1 | cum |
|---|
| 5 | 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :\na.One or more coats on old work\n | BI01010001010000000000000515BI0100001117 | 37 | sqm |
|---|
| 6 | 6 | Providing and fixing 18 mm thick gang saw cut, mirror polished, remoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.\na. Granite of any colour and shade. Area of slab over 0.50 sqm\n | BI01010001010000000000000515BI0100001118 | 8 | sqm |
|---|
| 7 | 7 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels,, etc including welding, grinding, buffing, polishing and making curvature (wherever required) and fixing the same with necessary stainless steel nuts and bolts complete including fixing the railing of required size, as per approval of engineer in charge (for payment purpose only weight of stainless steel members shall be considered. | BI01010001010000000000000515BI0100001119 | 112 | Kg |
|---|
| 8 | 8 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in- charge.(Structural frame work including M.S. plate to be provided separately . Rectangular area of the sheet only shall be measured for payment).\na.Overhead informatory road signage\n | BI01010001010000000000000515BI0100001120 | 4.3 | sqm |
|---|
