Civil Modification Works For Shifting And Setting Up Of Secondary Packing And Storage Facility At Hll Balaramapuram Unit , Thiruvananthapuram , Kerala
Tender Value
30 Lakhs
Estimated cost
Bid Submission
26 Dec 2019
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Balaramapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Civil Modification Works For Shifting And Setting Up Of Secondary Packing And Storage Facility At Hll Balaramapuram Unit , Thiruvananthapuram , Kerala
BOQ
| Name of Work: Civil modification works for shifting and setting up of Secondary Packing and storage facility at HLL Balaramapuram Unit, Thiruvananthapuram, Kerala | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL WORKS | |||
| 2 | 1.01 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | 50 | Sqm | |
| 3 | 1.02 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 12 | Cum | |
| 4 | 1.03 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. | 25 | Sqm | |
| 5 | 1.04 | Demolishing R.C.C. work manually/ by mechanical means including stackingof steel bars and disposal of unserviceable material within 50 metres lead asper direction of Engineer - in- charge | 5 | Cum | |
| 6 | 1.05 | Dismantling steel work in built up sections in angles, tees, flats andchannels including all gusset plates, bolts, nuts, cutting rivets, weldingetc. including dismembering and stacking within 50 metres lead. | 1500 | Kg | |
| 7 | 1.06 | Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of : GS Sheet | 100 | Sqm | |
| 8 | 1.07 | Refixing of dismantled structural members for roofing including all necessary fittings and accessories | 1500 | Kg | |
| 9 | 1.08 | Refixing of dismantled GS Sheets for roofing including all necessary fittings and accessories | 100 | Sqm | |
| 10 | 1.09 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 10 | Cum | |
| 11 | 1.1 | Cement screed concrete flooring on terrace 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, lining etc. complete. 40 mm thick with 10 mm nominal size stone aggregate. | 320 | Sqm | |
| 12 | 1.11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) | 10 | Cum | |
| 13 | 1.12 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.) Gates, trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete. Hot finished seamless type tubes | 1000 | Kg | |
| 14 | 1.13 | Providing corrugated G.S. sheet roofing including vertical / curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead, including a coat of approved steelprimer and two coats of approved paint on overlapping of sheetscomplete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cuttingto size and shape wherever required. \n1.00 mm thick with zinc coating not less than 275 gm/m² | 75 | Sqm | |
| 15 | 1.14 | Providing ridges or hips of width 60 cm overall width plain G.S. sheetfixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I.limpet and bitumen washers complete. \n0.80 mm thick with zinc coating not less than 275 gm/m² | 10 | Metre | |
| 16 | 1.15 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plainG.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts andwashers etc., including making necessary connections with rainwater pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m² | 20 | Metre | |
| 17 | 1.16 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of equired dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):\n | |||
| 18 | 1.161 | For Fixed Portion Powder coated aluminium (minimum thickness of powder coating 50 micron)\n | 360 | Kg | |
| 19 | 1.162 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | 50 | Kg | |
| 20 | 1.17 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness | 35 | Sqm | |
| 21 | 1.18 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 120 | Sqm | |
| 22 | 1.19 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm),with necessary accessories and screws etc. complete.\n | 5 | nos. | |
| 23 | 1.2 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper | 5 | nos. | |
| 24 | 1.21 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | 5 | nos. | |
| 25 | 1.22 | Providing and fixing chromium plated brass handles with necessary screws etc.complete:125 mm | 5 | nos. | |
| 26 | 1.23 | Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm | 5 | nos. | |
| 27 | 1.24 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:100x75x4 mm | 15 | nos. | |
| 28 | 1.25 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. | |||
| 29 | 1.251 | 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made ofGypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I andlaminated with white 0.16mm thick fire retardant PVC film on the face side and 12micronmetalized polyester on the back side with all edges sealed with the face side PVC filmwhich goes around and wraps the edges and is bonded to the edges and the back sidemetalized polyester film so as to make the tile a completely sealed unit. | 100 | Sqm | |
| 30 | 1.26 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover | 10 | Sqm | |
| 31 | 1.27 | Providing and fixing ball bearing for rolling shutters | 2 | nos. | |
| 32 | 1.28 | Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area | 10 | Sqm | |
| 33 | 1.29 | Providing and laying APP ( Atctic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non- woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 250C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. OVER the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Joint strength in longitudinal and transverse direction at 230C as 650/450N/5CM. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 1500C. Cold flexibility shall be up to - 20C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane:3 mm thick | 320 | Sqm | |
| 34 | 1.3 | Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge. | 10 | Metre | |
| 35 | 1.31 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge.Non decorative finish | 4 | Sqm | |
| 36 | 1.32 | Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. | 120 | Sqm | |
| 37 | 1.33 | Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge \nNote: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument. 25mm thick in Grade M 25 with cement content not less than 330 kg per cum | 120 | Sqm | |
| 38 | 1.34 | Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern overand including 50 mm thick compacted bed of coarse sand, filling thejoints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the departmentfree of cost). | 25 | Sqm | |
| 39 | 1.35 | Shifting of existing water tanks about 5KL capacity and re-fixing to new building with all necessary fittings and installations | 2 | Job | |
| 40 | 2 | FINSHING | |||
| 41 | 2.01 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 360 | Sqm | |
| 42 | 2.02 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete | 80 | Sqm | |
| 43 | 2.03 | 12 mm cement plaster of mix : \n1:4 (1 cement: 4 Fine Sand) | 80 | Sqm | |
| 44 | 2.04 | Applying one coat of water thinnable cement primer of approved brand andmanufacture on wall surface. Water thinnable cement primer | 80 | Sqm | |
| 45 | 2.05 | Wall painting with premium plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work (Minimum rate of material should be Rs. 400/litre) | 400 | Sqm | |
| 46 | 2.06 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 25 | Sqm | |
| 47 | 3 | Flooring | |||
| 48 | 3.01 | Providing and laying Vitrified tiles in floor with different sizes (thickness to bespecified by the manufacturer), with water absorption less than 0.08% andconforming to IS:15622, of approved brand & manufacturer, in all colours andshade, laid with cement based high polymer modified quick set tile adhesive(water based) conforming to IS : 15477, in average 6 mm thickness, includinggrouting of joints.Size Of Tile : 600mm x 600mm | 250 | Sqm | |
| 49 | 3.02 | Providing and laying Vitrified tiles in different sizes (thickness to be specifiedby the manufacturer), with water absorption less than 0.08% and conforming toIS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting,riser of steps, laid with cement based high polymer modified quick set tileadhesive (water based) conforming to IS: 15477, in average 6 mm thickness,including grouting of joints. Size Of Tile : 600mm x 600mm | 30 | Sqm | |
| 50 | 3.03 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for indoor floors, laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including Skirting, grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge | 850 | Sqm | |
| 51 | 3.04 | Providing and laying Ceramic glazed floor tiles anti skid of size 300x300 mm (thicknessto be specified by the manufacturer) of 1st quality conforming to IS : 15622 ofapproved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the joints with white cement andmatching pigment etc., complete. | 65 | Sqm | |
| 52 | 3.05 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kgper sqm, including pointing in white cement mixed with pigment of matching shade complete. | 40 | Sqm | |
| 53 | 4 | Plumbing and Sanitary Works | |||
| 54 | 4.01 | Dismantling of existing wash basin , pillar tap ,water connectors and drain pipes including stacking at a distance of 100 meters. | 3 | Each | |
| 55 | 4.02 | Dismantling of existing Urinal , its water connectors and drainage lines without making any damages to water line including stacking at a min distance of 100 meters. | 3 | Each | |
| 56 | 4.03 | Dismantling of existing EWC and its flushing cistern without making damages to sewer Pipe and water pipe including stacking at a distance of distance of 100 metres. | 3 | Each | |
| 57 | 4.04 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 2 | nos. | |
| 58 | 4.05 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix( 1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete.For pipes 100 to 250 mm diameter | 2 | Each | |
| 59 | 4.06 | Supplying and providing Polyethylene Septic Tanks unique size with ISI mark and 3 chamber design with all accessories branded like United , for a capacity of min 2000 litre (35 to 50 flush/day) including Earth work in excavation , all Metreials and fitting and labour charge for fittings etc complete | 1 | Each | |
| 60 | 4.07 | Making soak pit 2.5 m diaMetre 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diaMetre, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 1 | Each | |
| 61 | 4.08 | Providing and fixing PVC pipes with ISI mark for water supply arrangements including cost pipes, fittings like : Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes solvent cement,testing of pipes, labour charges etc complete : Concealed work including cutting chases and making good the wall etc. Make: kelachandra, saktiman, finolex, supreme or equivalent | 5 | meter | |
| 62 | 4.081 | 20mm dia. PVC pipe (10Kgf/cm2 ) | 40 | meter | |
| 63 | 4.082 | 25mm dia. PVC pipe (10Kgf/cm2 ) | 15 | meter | |
| 64 | 4.083 | 32mm dia. PVC pipe (10Kgf/cm2 ) | 15 | meter | |
| 65 | 4.084 | 40mm dia. PVC pipe (10Kgf/cm2 ) | 15 | meter | |
| 66 | 4.09 | Providing and fixing PVC soil, waste and vent pipe to IS : 13592 of SWR quality including all fittings, like : Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement by application of leak proof adhesive like FRP paste including cutting holes in walls and floors and making good. Make:Supreme,Finolex,Prince etc.., | 20 | nos. | |
| 67 | 4.091 | 50mm dia (6 Kgf/cm2 ) | 50 | meter | |
| 68 | 4.092 | 110mm dia (6 Kgf/cm2 ) | 50 | meter | |
| 69 | 4.1 | Providing and fixing CP grating of 6mm thick with rim including setting in floor with white cement mortar and making good the floor 125mm dia | 3 | Each | |
| 70 | 4.11 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 40 mm nominal bore | |||
| 71 | 4.111 | Horizontal | 2 | Each | |
| 72 | 4.112 | Vertical | 2 | Each | |
| 73 | 4.12 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :\n(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.\n(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | 30 | Sqm | |
| 74 | 4.13 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Range of three half stall urinals with 10 litre PVC. automatic flushing cistern | 6 | nos. | |
| 75 | 4.14 | Providing & fixing of CP Health faucet. Hand operated spray unit (instand type) with 2 Mtr Flexible Full CP Tube and Abs Chrome Plate Stand ,including all .Make:Jaguar, Hindware, Parryware, crome or equivalent as per the instructions of Engineer in charge | 3 | nos. | |
| 76 | 4.15 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid\n Make: Hindware, Rak, Cera or Equivalent | 6 | nos. | |
| 77 | 4.16 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap | 2 | nos. | |
| 78 | 4.17 | Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm | 3 | Each | |
| 79 | 4.18 | Providing and fixing brass bib cock of approved quality : | |||
| 80 | 4.181 | 15 mm nominal bore | 5 | Each | |
| 81 | 4.182 | 20 mm nominal bore | 5 | Each | |
| 82 | 4.19 | Providing and fixing SS soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. | 4 | Each | |
| 83 | 4.2 | Providing and fixing SS towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, | 5 | Each | |
| 84 | 4.21 | Providing and fixing square – mouth PVC. Gully trap grade “A” complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design | 5 | Each | |
| 85 | 4.22 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore | 5 | Each | |
| 86 | 4.23 | Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms. | 3 | Each | |
| 87 | 4.24 | Providing and fixing C.P. brass angle valve of approved quality conforming to IS:8931 a) 15 mm nominal bore: .Make:Hindware,Cera,Jaguar etc.. | |||
| 88 | 4.241 | 15 mm nominal bore | 8 | Each | |
| 89 | 4.242 | 40 mm nominal bore | 8 | Each |
AI Tender Summary
Tender Timeline
Dec 17, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 26, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 27, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender