Communications and Information Technology  Government Departments Closing in 0 days TDR #22928408

Supply Of Components For Hcdc Group Electronic Components

Issued by Government Departments · Pune, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Dec 2019
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply Of Components For Hcdc Group Electronic Components- 2 Tca9548a 1-To-8 I2c Multiplexer ( Technical Specifications: I2c Sensor, Operating Voltage: 3V To 5V ) 3 Cd74hc4067 High Speed ??Cmos 16-Channel Analog / Digital Multiplexer Breakout Module ( Technical Specification : 2V To 6V Operation, “On” Resistance: 70 Ohms @ 4.5V, 6Ns Break-Before-Make @ 4.5V, Wide Operating Temperature Range: -55C To 125C, Pcb Size ( Mm ) - 40×18, Weight ( Gm ) - 3 ) 4 Mini Sd Card Mp3 Sound Module For Pic Arduino Wtv020-Sd ( Technical Specifications : Fat File System Sd Carrier, 4Bit Adcpm Format Files, Audio Output: 16Bitdac And Pwm, Maximum Voice Storage: 512 Voice, Operating Voltage: Dc 2.6 To 3.6V, Quiescent Current: 16 Μa ( Sd Card Is Not Inserted ) ) 5 Breadboard-Friendly Pcb Mount Mini Speaker ( Technical Specification : 8 Ohm Impedance, 0.2W Output Power, Weight-8 G, Diameter - 29 Mm, Height - 12 Mm, Distance Between Pins - 15 Mm ) 6 0. 91 Inch 128 X 32 Iic I2c Blue Oled Lcd Display Ssd1306 Driver Dc 3. 3V 5V Module ( Technical Specification: Driving Ic: Ssd1306, Operating Voltage: 3.3-5V, Resolution Ratio: 128 X 32, Size: 091 Inch, Text Color: Blue, Background Color: Black ) 7 Tp Link Wireless Router ( Tp Link ) ( Tl-Wr840n ) ( Technical Specifications- Upstream Line Rate ( Gbps ) : 1.244, Downstream Line Rate ( Gbps ) : 2.488, Minimum Tx Output Power ( Launch Powe ) ( Dbm ) R : 0.5, Maximum Tx Output Power ( Launch Powe ) ( Dbm ) R : 5, Rx Sensitivity ( Dbm ) : -27, Number Of Ethernet Ports ( Minimum ) : 4, Number Of Pots ( Minimum ) : 0 ) 8 7 Inch Monitor Display Screen ( Technical Specification: Input Voltage: Dc 7.4~35V, Input Current: Dc 0.5A-1.5A, Power Consumption: =8W Watts, Resolution: 1024 X 600, Aspect Ratio: 16:9 & 4:3, Contrast Ratio: 500:1 ) 9 3.5 Tft Colour Screen Module 320X480 Ultra Hd Lcd Shield For Arduino ( Technical Specification: 3.5 Tft Screen With 320X480 Resolution, Driver: Ili9486, Bus Used: 8-Bit, Touch: No, Module Size: 55.63Mm*83.49Mm, Item Weight: 200Gm ) 10 Usb Charger For 7.4V Lipo Battery ( Technical Specification: Charge Input Voltage ( Usb In ) :3-6V ( 5V, Typical For Usb In ) , Battery Input ( Bat In ) : 7.4V 2S Cells Li-Polymer / Li-Ion Battery, Maximum Charge Current: 1A Trickle Charging, Constant Current, Constant Voltage Three Phases Charging Charge Cutoff Voltage: 8.4V±1%, Charge Efficiency: >90%, Protections: I. Bat In: Over Charge / Reverse Connection Protection, Ii. Usb In: Adaptive Input Current Limitation, Over Heat / Reverse Connection Protection, Operation Temperature: -40?~85?, Dimension: 28.0Mm*37.0Mm / 1.1 * 1.46 Inches ) 11 Jdy-19 2.4Ghz Ultra Low Power Bluetooth 4.2 Module Ble Ibeacon ( Technical Specifications: Working Voltage:1.8V – 3.6V, Transmission Distance:40 Meters, Working Frequency Band: 2.4G, Modulation Mode Is Gfsk, Transmit Power: 4Db ( Maximum ) , Communication Interface: Uart, Operating Voltage: 1.8V – 3.6V, Operating Temperature: -40 ° C - 80 ° C, Receive Sensitivity: -97Dbm, Awakening State Current: 500Ua ( With Broadcast ) , Light Sleep State Current: <50Ua ( With Broadcast ) , Deep Sleep Current: 3Ua ( No Broadcast ) , Instruction Parameter Saving: Parameter Configuration Power-Down Data Is Saved, Stm Soldering Temperature: <260°C, Module Size: 19.6 * 14.94 * 1.8 Mm ) 12 Jdy-62 Stereo Dual Channel Audio Bluetooth 4.0 Module ( Technical Specifications- Ble Protocol: Bluetooth 4.0, Working Voltage Range 4.2 To 5V, Module Size: 25*15.5*2.4Mm ) 13 Bluetooth Ble4.0 Uart Module Based On Jdy-08 ( Technical Specifications - Operation Level: 3.3V, Working Frequency: 2.4Ghz, Modulation Method: Gfsk ( Gaussian Frequency Shift Keying ) , Speed: 0.4 Seconds For Apple, No Byte Limit For Android Up To 6K Byte / Sec, Service: Bluetooth Uuid, Size: 20 X 15 X 3Mm, Weight: 4.00G ) 14 Nrf51822 Bluetooth 4.0 Module ( Blue ) ( Technical Specifications: 24Ghz Multi-Protocol Radio Frequency, 32-Bit Arm Cortex M0 Processor, 128-Bit Hardware Encryption Processor 256Kb Flash / 32Kb Ram, Digital Interface: Spi / I2c / Uart, Output Power: + 4Dbm To -20Dbm, Power Management Operating Voltage Range ( 18 V ~ 36 V ) ) 15 Hm-10 Cc2541 Cc41 Bluetooth Low Energy Ble 4.0 Uart Transceiver Serial Module ( Technical Specifications: Bluetooth Protocol: Bluetooth Specification V4.0 Ble Receives No Byte Limit Iphone 4S Under Open Environment And Can Achieve 110 M Long Distance Communication, Cc2541 Chip Configuration 256Kb Space Follow The Bluetooth Specification V4.0 Ble, Supports At Commands The User Can Modify The Serial Port , Baud Rate, Device Name , Password And Other Parameters According To The Pair, The Module Supports Uart Interface And Supports Bluetooth Spp Serial Protocol, Connected With Iphone 4S And Android 4.3 Above, Low-Power Dissipation, Hm-10 Cc2541 Cc41 Bluetooth 4.0 Uart Transceiver Serial Module Used By The U S, Operating Frequency: 2.4Ghz, Ism Band Modulation: Gfsk ( Gaussian Frequency Shift Keying ) ) 16 Esp-Wroom-02D - Wi-Fi Rf Module ( Pcb Antenna ) ( Technical Specifications: Core Esp8266, Antenna Onboard Antenna, Dimensions ( 18.00±0.10 ) X ( 20.00±0.10 ) X ( 3.20±0.10 ) , Wi-Fi Protocols 802.11 B / G / N, Frequency Range 2.4 Ghz ~ 2.5 Ghz, Operating Voltage 2.7V ~ 3.6V, Spi Flash 2Mb ) 17 Wifi+Bt / Ble Module, Single-Core, 4 Mb Spi Flash, Pcb Antenna ( Technical Specifications: Manufacturer:Espressif Systems, Frequency Range:2.4~2.5 Ghz, Wi-Fi:802.11 B / G / N ( 802.11N Up To 150 Mbps ) , On-Chip Sensor:Hall Sensor, Interface: Sd Card, Uart, Spi, Sdio, I2c, Led Pwm, Motor Pwm, I 2S, Ir, Pulse Counter, Gpio, Capacitive Touch Sensor, Adc, Dac, Bluetooth:Bluetooth V4.2 Br / Edr And Ble Specification, Spi Flash:, 4 Mb, Crystal:40 Mhz Crystal, Power Supply:2.7~3.6 V, Size:18.00 × 25.50 × 3.10 Mm, Operating Temperature:-40~85C ) 18 Esp32-Wroom-32D ( 16Mb ) - Wi-Fi+Bt+Ble Mcu Module ( Spi Flash 16Mb, Pcb Antenna ) 19 Esp32-Wrover ( 16Mb ) - Wi-Fi+Bt+Ble Mcu Module ( Spi Flash 16Mb, Pcb Antenna ) 20 Esp32-Wroom-32D - Wi-Fi+Bt+Ble Mcu Module ( Spi Flash 4Mb, Pcb Antenna ) 21 Lifi Visible Light Communication ( Technical Specification: 38400 Baud Rate, 5-15 Feet Distance, High Quality Pcb Fr4 Grade With Fpt Certified, Package Contains : Nli Fi Transmitter +Li Fi Reciever + Led Light+Led Driver+Ft232rl Breakout Board-2+Usb Cable-2+Jumper Wires ) 22 Lightblue Beanb ( Technical Specifications: Sensors - 3- Axis Accelerometer & Temperature Sensor, Rgb Led Indicator, Ble Programming, Atmega328 Processor, 8 Mhz Clock Frequency, 3V Operating Voltage, Ble Peripherals ) 23 Resistive Touchscreen Overlay ( Technicalspecifications: Size - 7 Inch, Dimensions : 165Mm X 105Mm, 4 Wire ) 24 Tcs34725 Rgb Gesture Light Color Sensor Recognition Module Ir Blocking Filter For Arduino ( Technical Specifications: Features: N1. Red, Green, Blue ( Rgb ) , And White Light Sensing With Ir Blocking Filter. N2. Programmable Analog Gain And Integration Time. N3. 3, 800, 000:1 Dynamic Range. N4. Ideally Suited For Operation Behind Dark Glass. N5. Maskable Interrupt. N6. Programmable Upper And Lower Thresholds With Persistence Filter. N7. Power Management. N8. Low Power 2.5-Ua Sleep State. N9. 65-Ua Wait State With Programmable Wait State Time From 2.4 Ms To > 7 Seconds. N10. I2c Fast Mode Compatible Interface. N11. Data Rates Up To 400 Kbit / S. N12. Input Voltage Levels Compatible With Vdd Or 1.8 V Bus. N13. Register Set And Pin Compatible With The Tcs3x71 Series. N14. Small 2 Mm*2.4 Mm Dual Flat No-Lead ( Fn ) ) 25 Color Sensor, Complete Color Detector ( Technical Specifications: Sensor Chip - Tcs3200 ( Rgb Color Detector ) , Square Wave Output, Supports Fill-Light By Onboard Leds, Power: 2.7V ~ 5.5V, Ideal Detection Distance: 10Mm, Dimension: 36.0Mm * 20.6Mm, Mounting Holes Size: 2.0Mm ) 26 Orange Transmitter ( Tx ) 2500Mah 2S 3C ( 7.4V ) Lithium Polymer Battery Pack ( Li-Po ) ( Technical Specifications- Capacity ( Mah ) : 2500, Weight ( Gm ) 105, Output Voltage :7.4 V, Charge Rate : 1-3 C ( Recommended ) , Discharge Plug : Xt-60, Balance Plug : Jst-Xh, Length ( Mm ) :97, Width ( Mm ) :30, Height ( Mm ) : 18, Max. Burst Discharge: 5C ( 10 Sec ) , Max. Charge Rate: 5 C, Max. Continuous Discharge: 3C ) 27 2200Mah 7.4V Lipo Battery ( Technical Specifications: Power 2200Mah Battery, Voltage: 7.4V, Xt60 Connector ) 28 3300Mah 30C 2S1p 7.4V Lipo Battery ( Technical Specifications- Capacity: 3300Mah, Weight: 215G, Voltage:7.4, Dimensions: 25*46*138 ( Mm ) , Max Continuous Discharge:35C ( 99A ) , Balance Plug: Jst-Xh, Max Burst Discharge:60C ( 198A ) , Discharge Plug: Xt 60 Plug, Charge Rate: 1-3C, Recommended: 5C Max ) 29 Duracell Pb3350 5002730 3350Mah Lithium Ion Powerbank ( Technical Specifications: 3350Mah Lithium-Ion Battery, Up To 24 Hours Extra Of Talk Or Surf Time ( Hours Of Time And Number Of Charges Are Estimated By Comparing The Iphone 7 Internal Batteries Specification On Apple To The Internal Batteries Of Duracell Powerbank; Results Will Vary By Device And Conditions ) , Dual Charge Technology For Simultaneous Charge Of The Power Bank And A Phone Or Other Usb-Powered Device, Up To 1.7 Charges For Iphone 7 ( Hours Of Time And Number Of Charges Are Estimated By Comparing The Iphone 7 Internal Batteries Specification On Apple To The Internal Batteries Of Duracell Power Bank; Results Will Vary By Device And Conditions ) , 4-Level Led Indication Showing How Much Back-Up Energy Is Left In The Power Bank, Fast Charge Technology To Speed Up The Charging Process, Dual Charge Technology For Simultaneous Charging Of The Power Bank And A Phone Or Other Usb-Powered Device, Comes Pre-Charged With 3-Year Guarantee And 10 Safety Features, Power Bank On Plane - Flight Approved For Carry-On Luggage ( Usage On Board Is Subject To Any Applicable Regulations ) , 3 Year Warranty Provided By The Manufacturer From Date Of Purchase, High Efficiency - 85.95% ) 30 Morui Mo10 10000Mah Lithium-Polymer Power Bank ( Pink ) ( Technical Specifications- Battery: Lithium-Polymer, Capacity: 10000 Mah, Input: 2X5v / 2.1A, Output: 5V / 2.1A, Connector Type: Micro Usb, Dimensions: 85*85*28Mm, Weight: 230 Gm ) 31 Duracell Pb6700 5003094 6700Mah Lithium Ion Powerbank ( Technical Specifications: 6700Mah Lithium-Ion Battery, Up To 48 Hours Extra Of Talk Or Surf Time ( Hours Of Time And Number Of Charges Are Estimated By Comparing The Iphone 7 Internal Batteries Specification On Apple To The Internal Batteries Of Duracell Powerbank; Results Will Vary By Device And Conditions ) , Dual Charge Technology For Simultaneous Charge Of The Power Bank And A Phone Or Other Usb-Powered Device, Up To 3 Charges For Iphone 7 ( Hours Of Time And Number Of Charges Are Estimated By Comparing The Iphone 7 Internal Batteries Specification On Apple To The Internal Batteries Of Duracell Powerbank; Results Will Vary By Device And Conditions ) , 4-Level Led Indication Showing How Much Back-Up Energy Is Left In The Power Bank, 2X Faster Charge Of The Power Bank And The Smartphone Thanks To 2.4 Amps Input And Output ( Based On Usb 1.0 / 2.0 Battery Charging Speeds ) , Dual Charge Technology For Simultaneous Charging Of The Power Bank And A Phone Or Other Usb-Powered Device, Comes Pre-Charged With 3-Year Guarantee And 10 Safety Features, Power Bank On Plane - Flight Approved For Carry-On Luggage ( Usage On Board Is Subject To Any Applicable Regulations ) , 3 Year Warranty Provided By The Manufacturer From Date Of Purchase ) 32 One Bank Pb_6000_P 6000 -Mah Li-Ion Power Bank White ( Technical Specifications- Battery Type:Li-Ion, Mah ( Capacity ) :6000, No Of Output Ports:2, Output Power:5V / 1A ) 33 Passive Rfid Uhf Antenna With Following Technical Specifications- Operating Frequency: 865 To 868 Mhz, Antenna Connection: Sma Socket ( 50 Ohm ) , Antenna Gain: Min 10 Dbi To Max 14 Dbi, Antenna Type : Omni-Directional / Circular, Read Range: At Least 10 Meters, Protection: Ip65 Power Supply: Max 12 V. 34 Passive Rfid Uhf Floor Mat Antenna With Following Specification - Antenna Type: Omni Directional / Circular Polarisation, Antenna Gain : Min 10 Dbi To Max 14 Dbi, Connector Type: Sma Connector ( 50 Ohm ) , Input Power: Max 100W, Transponder Detection: At Least 50 Tag / Sec, Weight - Max 1.5 Kg, Connection Position- Bottom. 35 Passive Rfid Uhf Reader With Following Specification- Operating Frequency- 865-868 Mhz, Antenna Type- Circular / Omni-Directional, Antenna Support-External ( Min 4 Ports ) , Antenna Connector Tuype- 4X Sma Female ( 50 Ohm ) , Other- Integrated Multiplexer, Support External Multiplexer, Communication Interfaces: Rs 232, Ethernet, Usb, Sdk Support: C, C++, C#, Java, Net , Supported Transponders - Epc Class 1 Gen 2, Epc Class 1 Gen 2 V2, Iso 18000-6E, Reading Range - At Least 12 Meter ( 40 Feet ) Secure Read Range, Protection Class- Ip 53, Ip 64, Output Power- 100Mw To Max 2 Watt Rfdiagnosis: Rf-Channel Monitoring, Antenna Swr Control, Internal Overheatting Control, Other Feature- Anti-Collision, Battery Assisted Real Time Clock, Supports Encypted Transponder Communication, Power Supply- 24 V Dc. 36 Paasive Rfid Uhf Tags With Following Specifications- Operating Frequency:865-868 Mhz Standards-Epc Class 1 Gen 2, Epc Class 2 Gen 2 V2, Iso 18000-6C, Atleast 64 Bit Tid ( Truly Unique Id ) , Various Types - Adhesive ( Non Corrosive ) , Screw Support, Base Material Support:Metal, Non-Metal, Fabric Etc. ) 37 Rfid Uhf Multiplexer With Following Technical Specifications- Operating Frequency: 865-868 Mhz, Dc Coupling: 7V / 150 Ma Or 12V

BOQ

Name of Work: Supply of Components for HCDC group
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Supply of Components for C-DAC HCDC group.
21.01TCA9548A 1-to-8 I2C Multiplexer (Technical Specifications: I2C sensor, Operating Voltage: 3V to 5V)Item Code 25Nos
31.02CD74HC4067 High Speed ??CMOS 16-Channel Analog/Digital Multiplexer Breakout Module (Technical Specification : 2V to 6V operation, “On” resistance: 70 Ohms @ 4.5V, 6ns break-before-make @ 4.5V, Wide operating temperature range: -55C to 125C, PCB Size (mm) - 40×18, Weight (gm)- 3)Item Code 320Nos
41.03Mini SD Card MP3 Sound Module For PIC Arduino WTV020-SD (Technical Specifications : FAT file system SD carrier, 4Bit ADCPM format files, Audio output: 16bitDAC and PWM, Maximum voice storage: 512 voice, Operating voltage: DC 2.6 to 3.6V, Quiescent current: 16 µA (SD card is not inserted))Item Code 410Nos
51.04Breadboard-Friendly PCB Mount Mini Speaker (Technical Specification : 8 Ohm impedance, 0.2W Output Power, Weight-8 g, Diameter - 29 mm, Height - 12 mm, Distance Between pins - 15 mm)Item Cod 510Nos
61.050. 91 Inch 128 x 32 IIC I2C Blue OLED LCD Display SSD1306 Driver DC 3. 3V 5V Module( Technical Specification: Driving IC: SSD1306, Operating Voltage: 3.3-5V, Resolution Ratio: 128 x 32, Size: 091 Inch, Text Color: Blue, Background Color: Black)Item Code 610Nos
71.06TP Link Wireless Router (TP Link) (TL-WR840N) (Technical Specifications- Upstream Line Rate (Gbps) : 1.244, Downstream Line Rate (Gbps) : 2.488, Minimum Tx Output power ( launch powe) (dBm)r : 0.5, Maximum Tx Output power ( launch powe) (dBm)r : 5, Rx Sensitivity (dBm) : -27, Number of Ethernet Ports (Minimum) : 4, Number of POTS (Minimum) : 0 )Item Code 72Nos
81.077 Inch Monitor Display Screen (Technical Specification: Input Voltage: DC 7.4~35V, Input Current: DC 0.5A-1.5A, Power Consumption: =8W Watts, Resolution: 1024 x 600, Aspect Ratio: 16:9 & 4:3, Contrast Ratio: 500:1)Item Code 82Nos
91.083.5 TFT Colour Screen Module 320x480 Ultra HD LCD Shield for Arduino (Technical Specification: 3.5\" TFT screen with 320x480 Resolution, Driver: ILI9486, Bus used: 8-bit, Touch: No, Module size: 55.63mm*83.49mm, Item Weight: 200gm )Item Code 92Nos
101.09USB Charger for 7.4V LiPo Battery (Technical Specification: Charge input voltage (USB IN):3-6V (5V, typical for USB IN), Battery input (BAT IN): 7.4V 2s cells Li-polymer/Li-ion battery, Maximum charge current: 1A trickle charging, constant current, constant voltage three phases charging Charge cutoff voltage: 8.4V±1%, Charge efficiency: >90%, Protections: i. BAT IN: over charge/reverse connection protection, ii. USB IN: adaptive input current limitation, over heat/reverse connection protection, Operation temperature: -40?~85?, Dimension: 28.0mm*37.0mm/ 1.1 * 1.46 inches)Item Code 105Nos
111.1JDY-19 2.4GHZ Ultra Low Power Bluetooth 4.2 Module BLE IBEACON (Technical Specifications: Working voltage:1.8V – 3.6V, Transmission Distance:40 meters, Working frequency band: 2.4G, modulation mode is GFSK, Transmit power: 4db (maximum), Communication interface: UART, Operating voltage: 1.8V – 3.6V, Operating temperature: -40 ° C - 80 ° C, Receive sensitivity: -97dbm, Awakening state current: 500uA (with broadcast), Light sleep state current: <50uA (with broadcast), Deep sleep current: 3uA (no broadcast), Instruction parameter saving: Parameter configuration power-down data is saved, STM soldering temperature: <260°C, Module size: 19.6 * 14.94 * 1.8 mm )Item Code 1110Nos
121.11JDY-62 Stereo Dual Channel Audio Bluetooth 4.0 Module (Technical Specifications- BLE Protocol: Bluetooth 4.0, Working Voltage range 4.2 to 5V, Module size: 25*15.5*2.4mm)Item Cod 1210Nos
131.12Bluetooth BLE4.0 UART Module Based On JDY-08 (Technical Specifications - Operation Level: 3.3V, Working frequency: 2.4GHz, Modulation method: GFSK(Gaussian Frequency Shift Keying), Speed: 0.4 Seconds for Apple, No byte limit for Android up to 6k Byte/sec, Service: Bluetooth UUID, Size: 20 x 15 x 3mm, Weight: 4.00g)Item Code 1310Nos
141.13NRF51822 BLUETOOTH 4.0 MODULE (Blue) (Technical Specifications: 24GHz multi-protocol radio frequency, 32-bit arm cortex M0 processor, 128-bit hardware encryption processor 256kb flash / 32kb ram, digital interface: Spi / i2c / uart, output power: + 4dbm to -20dbm, Power Management Operating Voltage Range (18 v ~ 36 v))Item Code 1410Nos
151.14HM-10 CC2541 CC41 Bluetooth Low Energy BLE 4.0 UART Transceiver Serial Module (Technical Specifications: Bluetooth protocol: Bluetooth Specification V4.0 BLE receives no byte limit Iphone 4s under open environment and can achieve 110 m long distance communication, CC2541 chip configuration 256Kb space follow the Bluetooth specification V4.0 BLE, Supports AT commands the user can modify the serial port ,baud rate, device name ,password and other parameters according to the pair, The module supports UART interface and supports Bluetooth SPP serial protocol, Connected with Iphone 4S and Android 4.3 above, Low-power dissipation, HM-10 CC2541 CC41 Bluetooth 4.0 UART Transceiver Serial Module used by the U S, Operating frequency: 2.4GHz, ISM band Modulation: GFSK (Gaussian Frequency Shift Keying))Item Code 1510Nos
161.15ESP-WROOM-02D - Wi-Fi RF Module (PCB Antenna) (Technical Specifications: Core ESP8266, Antenna Onboard antenna, Dimensions (18.00±0.10) x (20.00±0.10) x (3.20±0.10), Wi-Fi protocols 802.11 b/g/n, Frequency range 2.4 GHz ~ 2.5 GHz, Operating voltage 2.7V ~ 3.6V, SPI Flash 2MB)Item Code 1610Nos
171.16WiFi+BT/BLE Module, Single-core, 4 MB SPI Flash, PCB Antenna (Technical SPecifications: Manufacturer:EspressIf Systems,Frequency range:2.4~2.5 GHz,Wi-Fi:802.11 b/g/n (802.11n up to 150 Mbps),On-chip sensor:Hall sensor, Interface: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I 2S, IR, pulse counter, GPIO, capacitive touch sensor, ADC, DAC, Bluetooth:Bluetooth v4.2 BR/EDR and BLE specification,SPI flash:,4 MB,Crystal:40 MHz crystal, Power supply:2.7~3.6 V, Size:18.00 × 25.50 × 3.10 mm, Operating temperature:-40~85C)Item Code 1710Nos
181.17ESP32-WROOM-32D (16MB) - Wi-Fi+BT+BLE MCU Module (SPI Flash 16MB, PCB Antenna)Item Code 1810Nos
191.18ESP32-WROVER (16MB) - Wi-Fi+BT+BLE MCU Module (SPI Flash 16MB, PCB Antenna)Item Code 1910Nos
201.19ESP32-WROOM-32D - Wi-Fi+BT+BLE MCU Module (SPI Flash 4MB, PCB Antenna)Item Code 2010Nos
211.2LiFi Visible Light Communication (Technical Specification: 38400 baud rate, 5-15 feet distance,High quality PCB FR4 Grade with FPT Certified, Package Contains :\nLi Fi Transmitter +Li Fi Reciever + LED Light+LED Driver+FT232RL Breakout Board-2+USB Cable-2+Jumper Wires)Item Code 211Nos
221.21LightBlue Beanb (Technical Specifications: Sensors - 3- axis accelerometer & Temperature sensor, RGB LED indicator, BLE programming, ATMEGA328 Processor, 8 MHz Clock Frequency, 3V Operating Voltage, BLE Peripherals)Item Code 221Nos
231.22Resistive Touchscreen Overlay (TechnicalSpecifications: Size - 7 Inch, Dimensions : 165mm x 105mm, 4 Wire)Item Code 232Nos
241.23TCS34725 RGB Gesture Light Color Sensor Recognition Module Ir Blocking Filter for Arduino (Technical Specifications: Features:\n1. Red, Green, Blue (RGB), and White Light Sensing with IR Blocking Filter.\n2. Programmable Analog Gain and Integration Time.\n3. 3,800,000:1 Dynamic Range.\n4. Ideally Suited for Operation Behind Dark Glass.\n5. Maskable Interrupt.\n6. Programmable Upper and Lower Thresholds with Persistence Filter.\n7. Power Management.\n8. Low Power 2.5-uA Sleep State.\n9. 65-uA Wait State with Programmable Wait State Time from 2.4 ms to > 7 Seconds.\n10. I2C Fast Mode Compatible Interface.\n11. Data Rates up to 400 kbit/s.\n12. Input Voltage Levels Compatible with VDD or 1.8 V Bus.\n13. Register Set and Pin Compatible with the TCS3x71 Series.\n14. Small 2 mm*2.4 mm Dual Flat No-Lead (FN) )Item Code 245Nos
251.24Color Sensor, Complete Color Detector (Technical Specifications: Sensor Chip - TCS3200 (RGB color detector), Square wave output, Supports fill-light by onboard LEDs, Power: 2.7V ~ 5.5V, Ideal detection distance: 10mm, Dimension: 36.0mm * 20.6mm, Mounting holes size: 2.0mm)Item Code 255Nos
261.25Orange Transmitter (TX) 2500mAh 2S 3C (7.4V) Lithium Polymer Battery Pack (Li-PO) (Technical Specifications- Capacity (mAh): 2500, Weight (gm) 105, Output Voltage :7.4 V, Charge Rate : 1-3 C (Recommended), Discharge Plug : XT-60, Balance Plug : JST-XH, Length (mm) :97,Width (mm):30,Height (mm): 18, Max. Burst Discharge: 5C (10 sec), Max. Charge Rate: 5 C, Max. Continuous Discharge: 3C)Item Code 265Nos
271.262200mAh 7.4V Lipo battery (Technical Specifications: Power 2200mAh Battery, Voltage: 7.4V, XT60 Connector )Item Code 275Nos
281.273300mAh 30C 2S1P 7.4V Lipo Battery (Technical Specifications- Capacity: 3300mAh, Weight: 215g, Voltage:7.4, Dimensions: 25*46*138(mm), Max Continuous Discharge:35C (99A), Balance Plug: JST-XH, Max Burst Discharge:60C(198A), Discharge Plug: XT 60 plug, Charge Rate: 1-3C, Recommended: 5C Max)Item Cod 285Nos
291.28Duracell PB3350 5002730 3350mAH Lithium Ion Powerbank (Technical Specifications: 3350mAH lithium-ion battery,Up to 24 hours extra of talk or surf time (hours of time and number of charges are estimated by comparing the iPhone 7 internal batteries specification on apple to the internal batteries of Duracell Powerbank; Results will vary by device and conditions), Dual charge technology for simultaneous charge of the power bank and a phone or other USB-powered device, Up to 1.7 charges for iPhone 7 (hours of time and number of charges are estimated by comparing the iPhone 7 internal batteries specification on apple to the internal batteries of Duracell power bank; Results will vary by device and conditions), 4-level LED indication showing how much back-up energy is left in the power bank, Fast charge technology to speed up the charging process, Dual charge technology for simultaneous charging of the power bank and a phone or other USB-powered device, comes pre-charged with 3-year guarantee and 10 safety features, power bank on plane - flight approved for carry-on luggage (Usage on board is subject to any applicable regulations), 3 year warranty provided by the manufacturer from date of purchase, High Efficiency - 85.95%)Item Code 293Nos
301.29Morui MO10 10000mAh Lithium-Polymer Power Bank (Pink) (Technical Specifications- Battery: Lithium-Polymer, Capacity: 10000 mAh, Input: 2X5V/2.1A, Output: 5V/2.1A, Connector Type: Micro USB, Dimensions: 85*85*28mm, Weight: 230 gm)Item Code 303Nos
311.3Duracell PB6700 5003094 6700mAH Lithium Ion Powerbank (Technical Specifications: 6700mAH lithium-ion battery, Up to 48 hours extra of talk or surf time (hours of time and number of charges are estimated by comparing the iPhone 7 internal batteries specification on apple to the internal batteries of Duracell Powerbank; Results will vary by device and conditions), Dual charge technology for simultaneous charge of the power bank and a phone or other USB-powered device, Up to 3 charges for iPhone 7 (hours of time and number of charges are estimated by comparing the iPhone 7 internal batteries specification on apple to the internal batteries of Duracell Powerbank; Results will vary by device and conditions), 4-level LED indication showing how much back-up energy is left in the power bank, 2x faster charge of the power bank and the smartphone thanks to 2.4 Amps input and output (based on USB 1.0/2.0 battery charging speeds), dual charge technology for simultaneous charging of the power bank and a phone or other USB-powered device, comes pre-charged with 3-year guarantee and 10 safety features, power bank on plane - flight approved for carry-on luggage (Usage on board is subject to any applicable regulations), 3 year warranty provided by the manufacturer from date of purchase)Item Code 313Nos
321.31ONE BANK PB_6000_P 6000 -mAh Li-Ion Power Bank White (Technical Specifications- Battery Type:Li-Ion, mAh ( Capacity):6000, No of Output Ports:2, Output Power:5V/1A )Item Code 323Nos
331.32Passive RFID UHF Antenna with following technical specifications- Operating Frequency: 865 to 868 MHz, Antenna Connection: SMA Socket (50 Ohm), Antenna Gain: Min 10 dBi to Max 14 dBi, Antenna type : Omni-Directional/Circular, Read range: At least 10 meters, Protection: IP65 Power Supply: Max 12 V.Item Code 331Nos
341.33Passive RFID UHF Floor Mat Antenna with following specification - Antenna type: Omni Directional /Circular Polarisation, Antenna Gain : Min 10 dBi to Max 14 dBi, Connector type: SMA Connector (50 Ohm), Input Power: Max 100W, Transponder detection: At least 50 Tag/sec, weight - Max 1.5 Kg, Connection Position- Bottom.Item Code 341Nos
351.34Passive RFID UHF Reader with following specification- Operating Frequency- 865-868 MHz, Antenna Type- Circular/Omni-directional, Antenna Support-External (Min 4 ports), Antenna Connector Tuype- 4x SMA Female (50 Ohm), Other- Integrated Multiplexer, support External Multiplexer, Communication Interfaces: RS 232, Ethernet, USB, SDK Support: C, C++, C#, Java, NET ,Supported Transponders - EPC Class 1 Gen 2, EPC Class 1 Gen 2 V2, ISO 18000-6e, Reading Range - At least 12 meter (40 feet) secure read range, Protection Class- IP 53, IP 64, Output Power- 100mW to max 2 Watt RFDiagnosis: RF-channel monitoring, Antenna SWR control, Internal Overheatting control, Other feature- Anti-collision, Battery assisted Real Time Clock, Supports Encypted transponder communication, Power Supply- 24 V DC.Item Code 351Nos
361.35Paasive RFID UHF Tags with following specifications- Operating Frequency:865-868 Mhz Standards-EPC Class 1 Gen 2, EPC Class 2 Gen 2 V2, ISO 18000-6c, Atleast 64 bit TID (Truly Unique ID), Various Types - Adhesive (Non corrosive), Screw support, base Material support:Metal, Non-Metal, Fabric etc.)Item Code 36200Nos
371.36RFID UHF Multiplexer with following technical specifications- Operating Frequency: 865-868 MHz, DC Coupling: 7v/150 ma or 12vItem Cod 31Nos

AI Tender Summary

OUR REF NO 22928408
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 28-12-2019
Authority
Authority Name Department Of Electronics And Information Technology
Work Description Supply Of Components For Hcdc Group Electronic Components- 2 Tca9548a 1-To-8 I2c Multiplexer ( Technical Specifications: I2c Sensor, Operating Voltage: 3V To 5V ) 3 Cd74hc4067 High Speed ??Cmos 16-Channel Analog / Digital Multiplexer Breakout Module ( Technical Specification : 2V To 6V Operation, “On” Resistance: 70 Ohms @ 4.5V, 6Ns Break-Before-Make @ 4.5V, Wide Operating Temperature Range: -55C To 125C, Pcb Size ( Mm ) - 40×18, Weight ( Gm ) - 3 ) 4 Mini Sd Card Mp3 Sound Module For Pic Arduino Wtv020-Sd ( Technical Specifications : Fat File System Sd Carrier, 4Bit Adcpm Format Files, Audio Output: 16Bitdac And Pwm, Maximum Voice Storage: 512 Voice, Operating Voltage: Dc 2.6 To 3.6V, Quiescent Current: 16 Μa ( Sd Card Is Not Inserted ) ) 5 Breadboard-Friendly Pcb Mount Mini Speaker ( Technical Specification : 8 Ohm Impedance, 0.2W Output Power, Weight-8 G, Diameter - 29 Mm, Height - 12 Mm, Distance Between Pins - 15 Mm ) 6 0. 91 Inch 128 X 32 Iic I2c Blue Oled Lcd Display Ssd1306 Driver Dc 3. 3V 5V Module ( Technical Specification: Driving Ic: Ssd1306, Operating Voltage: 3.3-5V, Resolution Ratio: 128 X 32, Size: 091 Inch, Text Color: Blue, Background Color: Black ) 7 Tp Link Wireless Router ( Tp Link ) ( Tl-Wr840n ) ( Technical Specifications- Upstream Line Rate ( Gbps ) : 1.244, Downstream Line Rate ( Gbps ) : 2.488, Minimum Tx Output Power ( Launch Powe ) ( Dbm ) R : 0.5, Maximum Tx Output Power ( Launch Powe ) ( Dbm ) R : 5, Rx Sensitivity ( Dbm ) : -27, Number Of Ethernet Ports ( Minimum ) : 4, Number Of Pots ( Minimum ) : 0 ) 8 7 Inch Monitor Display Screen ( Technical Specification: Input Voltage: Dc 7.4~35V, Input Current: Dc 0.5A-1.5A, Power Consumption: =8W Watts, Resolution: 1024 X 600, Aspect Ratio: 16:9 & 4:3, Contrast Ratio: 500:1 ) 9 3.5 Tft Colour Screen Module 320X480 Ultra Hd Lcd Shield For Arduino ( Technical Specification: 3.5 Tft Screen With 320X480 Resolution, Driver: Ili9486, Bus Used: 8-Bit, Touch: No, Module Size: 55.63Mm*83.49Mm, Item Weight: 200Gm ) 10 Usb Charger For 7.4V Lipo Battery ( Technical Specification: Charge Input Voltage ( Usb In ) :3-6V ( 5V, Typical For Usb In ) , Battery Input ( Bat In ) : 7.4V 2S Cells Li-Polymer / Li-Ion Battery, Maximum Charge Current: 1A Trickle Charging, Constant Current, Constant Voltage Three Phases Charging Charge Cutoff Voltage: 8.4V±1%, Charge Efficiency: >90%, Protections: I. Bat In: Over Charge / Reverse Connection Protection, Ii. Usb In: Adaptive Input Current Limitation, Over Heat / Reverse Connection Protection, Operation Temperature: -40?~85?, Dimension: 28.0Mm*37.0Mm / 1.1 * 1.46 Inches ) 11 Jdy-19 2.4Ghz Ultra Low Power Bluetooth 4.2 Module Ble Ibeacon ( Technical Specifications: Working Voltage:1.8V – 3.6V, Transmission Distance:40 Meters, Working Frequency Band: 2.4G, Modulation Mode Is Gfsk, Transmit Power: 4Db ( Maximum ) , Communication Interface: Uart, Operating Voltage: 1.8V – 3.6V, Operating Temperature: -40 ° C - 80 ° C, Receive Sensitivity: -97Dbm, Awakening State Current: 500Ua ( With Broadcast ) , Light Sleep State Current: <50Ua ( With Broadcast ) , Deep Sleep Current: 3Ua ( No Broadcast ) , Instruction Parameter Saving: Parameter Configuration Power-Down Data Is Saved, Stm Soldering Temperature: <260°C, Module Size: 19.6 * 14.94 * 1.8 Mm ) 12 Jdy-62 Stereo Dual Channel Audio Bluetooth 4.0 Module ( Technical Specifications- Ble Protocol: Bluetooth 4.0, Working Voltage Range 4.2 To 5V, Module Size: 25*15.5*2.4Mm ) 13 Bluetooth Ble4.0 Uart Module Based On Jdy-08 ( Technical Specifications - Operation Level: 3.3V, Working Frequency: 2.4Ghz, Modulation Method: Gfsk ( Gaussian Frequency Shift Keying ) , Speed: 0.4 Seconds For Apple, No Byte Limit For Android Up To 6K Byte / Sec, Service: Bluetooth Uuid, Size: 20 X 15 X 3Mm, Weight: 4.00G ) 14 Nrf51822 Bluetooth 4.0 Module ( Blue ) ( Technical Specifications: 24Ghz Multi-Protocol Radio Frequency, 32-Bit Arm Cortex M0 Processor, 128-Bit Hardware Encryption Processor 256Kb Flash / 32Kb Ram, Digital Interface: Spi / I2c / Uart, Output Power: + 4Dbm To -20Dbm, Power Management Operating Voltage Range ( 18 V ~ 36 V ) ) 15 Hm-10 Cc2541 Cc41 Bluetooth Low Energy Ble 4.0 Uart Transceiver Serial Module ( Technical Specifications: Bluetooth Protocol: Bluetooth Specification V4.0 Ble Receives No Byte Limit Iphone 4S Under Open Environment And Can Achieve 110 M Long Distance Communication, Cc2541 Chip Configuration 256Kb Space Follow The Bluetooth Specification V4.0 Ble, Supports At Commands The User Can Modify The Serial Port , Baud Rate, Device Name , Password And Other Parameters According To The Pair, The Module Supports Uart Interface And Supports Bluetooth Spp Serial Protocol, Connected With Iphone 4S And Android 4.3 Above, Low-Power Dissipation, Hm-10 Cc2541 Cc41 Bluetooth 4.0 Uart Transceiver Serial Module Used By The U S, Operating Frequency: 2.4Ghz, Ism Band Modulation: Gfsk ( Gaussian Frequency Shift Keying ) ) 16 Esp-Wroom-02D - Wi-Fi Rf Module ( Pcb Antenna ) ( Technical Specifications: Core Esp8266, Antenna Onboard Antenna, Dimensions ( 18.00±0.10 ) X ( 20.00±0.10 ) X ( 3.20±0.10 ) , Wi-Fi Protocols 802.11 B / G / N, Frequency Range 2.4 Ghz ~ 2.5 Ghz, Operating Voltage 2.7V ~ 3.6V, Spi Flash 2Mb ) 17 Wifi+Bt / Ble Module, Single-Core, 4 Mb Spi Flash, Pcb Antenna ( Technical Specifications: Manufacturer:Espressif Systems, Frequency Range:2.4~2.5 Ghz, Wi-Fi:802.11 B / G / N ( 802.11N Up To 150 Mbps ) , On-Chip Sensor:Hall Sensor, Interface: Sd Card, Uart, Spi, Sdio, I2c, Led Pwm, Motor Pwm, I 2S, Ir, Pulse Counter, Gpio, Capacitive Touch Sensor, Adc, Dac, Bluetooth:Bluetooth V4.2 Br / Edr And Ble Specification, Spi Flash:, 4 Mb, Crystal:40 Mhz Crystal, Power Supply:2.7~3.6 V, Size:18.00 × 25.50 × 3.10 Mm, Operating Temperature:-40~85C ) 18 Esp32-Wroom-32D ( 16Mb ) - Wi-Fi+Bt+Ble Mcu Module ( Spi Flash 16Mb, Pcb Antenna ) 19 Esp32-Wrover ( 16Mb ) - Wi-Fi+Bt+Ble Mcu Module ( Spi Flash 16Mb, Pcb Antenna ) 20 Esp32-Wroom-32D - Wi-Fi+Bt+Ble Mcu Module ( Spi Flash 4Mb, Pcb Antenna ) 21 Lifi Visible Light Communication ( Technical Specification: 38400 Baud Rate, 5-15 Feet Distance, High Quality Pcb Fr4 Grade With Fpt Certified, Package Contains : Nli Fi Transmitter +Li Fi Reciever + Led Light+Led Driver+Ft232rl Breakout Board-2+Usb Cable-2+Jumper Wires ) 22 Lightblue Beanb ( Technical Specifications: Sensors - 3- Axis Accelerometer & Temperature Sensor, Rgb Led Indicator, Ble Programming, Atmega328 Processor, 8 Mhz Clock Frequency, 3V Operating Voltage, Ble Peripherals ) 23 Resistive Touchscreen Overlay ( Technicalspecifications: Size - 7 Inch, Dimensions : 165Mm X 105Mm, 4 Wire ) 24 Tcs34725 Rgb Gesture Light Color Sensor Recognition Module Ir Blocking Filter For Arduino ( Technical Specifications: Features: N1. Red, Green, Blue ( Rgb ) , And White Light Sensing With Ir Blocking Filter. N2. Programmable Analog Gain And Integration Time. N3. 3, 800, 000:1 Dynamic Range. N4. Ideally Suited For Operation Behind Dark Glass. N5. Maskable Interrupt. N6. Programmable Upper And Lower Thresholds With Persistence Filter. N7. Power Management. N8. Low Power 2.5-Ua Sleep State. N9. 65-Ua Wait State With Programmable Wait State Time From 2.4 Ms To > 7 Seconds. N10. I2c Fast Mode Compatible Interface. N11. Data Rates Up To 400 Kbit / S. N12. Input Voltage Levels Compatible With Vdd Or 1.8 V Bus. N13. Register Set And Pin Compatible With The Tcs3x71 Series. N14. Small 2 Mm*2.4 Mm Dual Flat No-Lead ( Fn ) ) 25 Color Sensor, Complete Color Detector ( Technical Specifications: Sensor Chip - Tcs3200 ( Rgb Color Detector ) , Square Wave Output, Supports Fill-Light By Onboard Leds, Power: 2.7V ~ 5.5V, Ideal Detection Distance: 10Mm, Dimension: 36.0Mm * 20.6Mm, Mounting Holes Size: 2.0Mm ) 26 Orange Transmitter ( Tx ) 2500Mah 2S 3C ( 7.4V ) Lithium Polymer Battery Pack ( Li-Po ) ( Technical Specifications- Capacity ( Mah ) : 2500, Weight ( Gm ) 105, Output Voltage :7.4 V, Charge Rate : 1-3 C ( Recommended ) , Discharge Plug : Xt-60, Balance Plug : Jst-Xh, Length ( Mm ) :97, Width ( Mm ) :30, Height ( Mm ) : 18, Max. Burst Discharge: 5C ( 10 Sec ) , Max. Charge Rate: 5 C, Max. Continuous Discharge: 3C ) 27 2200Mah 7.4V Lipo Battery ( Technical Specifications: Power 2200Mah Battery, Voltage: 7.4V, Xt60 Connector ) 28 3300Mah 30C 2S1p 7.4V Lipo Battery ( Technical Specifications- Capacity: 3300Mah, Weight: 215G, Voltage:7.4, Dimensions: 25*46*138 ( Mm ) , Max Continuous Discharge:35C ( 99A ) , Balance Plug: Jst-Xh, Max Burst Discharge:60C ( 198A ) , Discharge Plug: Xt 60 Plug, Charge Rate: 1-3C, Recommended: 5C Max ) 29 Duracell Pb3350 5002730 3350Mah Lithium Ion Powerbank ( Technical Specifications: 3350Mah Lithium-Ion Battery, Up To 24 Hours Extra Of Talk Or Surf Time ( Hours Of Time And Number Of Charges Are Estimated By Comparing The Iphone 7 Internal Batteries Specification On Apple To The Internal Batteries Of Duracell Powerbank; Results Will Vary By Device And Conditions ) , Dual Charge Technology For Simultaneous Charge Of The Power Bank And A Phone Or Other Usb-Powered Device, Up To 1.7 Charges For Iphone 7 ( Hours Of Time And Number Of Charges Are Estimated By Comparing The Iphone 7 Internal Batteries Specification On Apple To The Internal Batteries Of Duracell Power Bank; Results Will Vary By Device And Conditions ) , 4-Level Led Indication Showing How Much Back-Up Energy Is Left In The Power Bank, Fast Charge Technology To Speed Up The Charging Process, Dual Charge Technology For Simultaneous Charging Of The Power Bank And A Phone Or Other Usb-Powered Device, Comes Pre-Charged With 3-Year Guarantee And 10 Safety Features, Power Bank On Plane - Flight Approved For Carry-On Luggage ( Usage On Board Is Subject To Any Applicable Regulations ) , 3 Year Warranty Provided By The Manufacturer From Date Of Purchase, High Efficiency - 85.95% ) 30 Morui Mo10 10000Mah Lithium-Polymer Power Bank ( Pink ) ( Technical Specifications- Battery: Lithium-Polymer, Capacity: 10000 Mah, Input: 2X5v / 2.1A, Output: 5V / 2.1A, Connector Type: Micro Usb, Dimensions: 85*85*28Mm, Weight: 230 Gm ) 31 Duracell Pb6700 5003094 6700Mah Lithium Ion Powerbank ( Technical Specifications: 6700Mah Lithium-Ion Battery, Up To 48 Hours Extra Of Talk Or Surf Time ( Hours Of Time And Number Of Charges Are Estimated By Comparing The Iphone 7 Internal Batteries Specification On Apple To The Internal Batteries Of Duracell Powerbank; Results Will Vary By Device And Conditions ) , Dual Charge Technology For Simultaneous Charge Of The Power Bank And A Phone Or Other Usb-Powered Device, Up To 3 Charges For Iphone 7 ( Hours Of Time And Number Of Charges Are Estimated By Comparing The Iphone 7 Internal Batteries Specification On Apple To The Internal Batteries Of Duracell Powerbank; Results Will Vary By Device And Conditions ) , 4-Level Led Indication Showing How Much Back-Up Energy Is Left In The Power Bank, 2X Faster Charge Of The Power Bank And The Smartphone Thanks To 2.4 Amps Input And Output ( Based On Usb 1.0 / 2.0 Battery Charging Speeds ) , Dual Charge Technology For Simultaneous Charging Of The Power Bank And A Phone Or Other Usb-Powered Device, Comes Pre-Charged With 3-Year Guarantee And 10 Safety Features, Power Bank On Plane - Flight Approved For Carry-On Luggage ( Usage On Board Is Subject To Any Applicable Regulations ) , 3 Year Warranty Provided By The Manufacturer From Date Of Purchase ) 32 One Bank Pb_6000_P 6000 -Mah Li-Ion Power Bank White ( Technical Specifications- Battery Type:Li-Ion, Mah ( Capacity ) :6000, No Of Output Ports:2, Output Power:5V / 1A ) 33 Passive Rfid Uhf Antenna With Following Technical Specifications- Operating Frequency: 865 To 868 Mhz, Antenna Connection: Sma Socket ( 50 Ohm ) , Antenna Gain: Min 10 Dbi To Max 14 Dbi, Antenna Type : Omni-Directional / Circular, Read Range: At Least 10 Meters, Protection: Ip65 Power Supply: Max 12 V. 34 Passive Rfid Uhf Floor Mat Antenna With Following Specification - Antenna Type: Omni Directional / Circular Polarisation, Antenna Gain : Min 10 Dbi To Max 14 Dbi, Connector Type: Sma Connector ( 50 Ohm ) , Input Power: Max 100W, Transponder Detection: At Least 50 Tag / Sec, Weight - Max 1.5 Kg, Connection Position- Bottom. 35 Passive Rfid Uhf Reader With Following Specification- Operating Frequency- 865-868 Mhz, Antenna Type- Circular / Omni-Directional, Antenna Support-External ( Min 4 Ports ) , Antenna Connector Tuype- 4X Sma Female ( 50 Ohm ) , Other- Integrated Multiplexer, Support External Multiplexer, Communication Interfaces: Rs 232, Ethernet, Usb, Sdk Support: C, C++, C#, Java, Net , Supported Transponders - Epc Class 1 Gen 2, Epc Class 1 Gen 2 V2, Iso 18000-6E, Reading Range - At Least 12 Meter ( 40 Feet ) Secure Read Range, Protection Class- Ip 53, Ip 64, Output Power- 100Mw To Max 2 Watt Rfdiagnosis: Rf-Channel Monitoring, Antenna Swr Control, Internal Overheatting Control, Other Feature- Anti-Collision, Battery Assisted Real Time Clock, Supports Encypted Transponder Communication, Power Supply- 24 V Dc. 36 Paasive Rfid Uhf Tags With Following Specifications- Operating Frequency:865-868 Mhz Standards-Epc Class 1 Gen 2, Epc Class 2 Gen 2 V2, Iso 18000-6C, Atleast 64 Bit Tid ( Truly Unique Id ) , Various Types - Adhesive ( Non Corrosive ) , Screw Support, Base Material Support:Metal, Non-Metal, Fabric Etc. ) 37 Rfid Uhf Multiplexer With Following Technical Specifications- Operating Frequency: 865-868 Mhz, Dc Coupling: 7V / 150 Ma Or 12V
Basic Detail
Tender No CDACP/24-1722/Components
Bidding Type Tender
Location
City Pune
State Maharashtra
Key Dates
Publish Date 17 Dec 2019
Submission Date 28 Dec 2019
Open Date 30 Dec 2019
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
24-1722-Re-Tender-Components-HCDC.pdf
Tendernotice_1.pdf
BOQ_552769.xls
098FE3A8-DAD9-4E5D-8DFB-4476AEE7FCC2.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 17, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 28, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 30, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

24-1722-Re-Tender-Components-HCDC.pdf

pdf

Tendernotice_1.pdf

xls

BOQ_552769.xls

html

098FE3A8-DAD9-4E5D-8DFB-4476AEE7FCC2.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders