Mtc Of Bagmara Sub Centre Under Bagmara Adc Village Sabroom South Tripura During The Year 2019 20 Sh Mtc Of Existing Building Including Sanitation
Tender Value
6.76 Lakhs
Estimated cost
Bid Submission
06 Jan 2020
0 days left
EMD
6769
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rupaichari → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Mtc Of Bagmara Sub Centre Under Bagmara Adc Village Sabroom South Tripura During The Year 2019 20 Sh Mtc Of Existing Building Including Sanitation
BOQ
| Name of Work: Mtc. Of Bagmara Sub-centre under Bagmara ADC village, Sabroom, South Tripura during the year 2019-20./ SH:- Mtc. of existing building in/c sanitation. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. | 120001 | 121 | sqm |
| 2 | 2 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge: | 120002 | 5.8575 | cum |
| 3 | 3 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 120003 | 475.48 | sqm |
| 4 | 4 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil a)By manual means | 120004 | 6.24 | Cum |
| 5 | 5 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. | 120005 | 1.17 | Cum |
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering (a) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) | 120006 | 1.56 | Cum |
| 7 | 7 | Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement. | 120007 | 8 | Kg |
| 8 | 8 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. | 120008 | 22 | Sqm |
| 9 | 9 | First class brick work in foundation and plinth including cost of all materials as required complete a) In cement mortar 1:4 ( 1 cement : 4 fine sand ). | 120009 | 3.9 | Cum |
| 10 | 10 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). | 120010 | 48.4 | Sqm. |
| 11 | 11 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. A) Fixed to openings /wooden frames with rawl plugs screws etc. | 120011 | 491.375 | Kg. |
| 12 | 12 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : a) 300 x 16 mm | 120012 | 4 | Nos. |
| 13 | 13 | Providing and fixing ISI marked aluminium tower bolts anodised (anodised coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc. complete as per clauses of Chapter - 9 of CPWD specification. a) 300 x 10 mm | 120013 | 12 | Nos. |
| 14 | 14 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : a) 125 mm | 120014 | 8 | Nos. |
| 15 | 15 | Providing and fixing precast chequered cement concrete tiles 22 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete.In dark shade using ordinary cement | 120015 | 25.2 | Nos. |
| 16 | 16 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.. | 120016 | 27.78 | Sqm. |
| 17 | 17 | Providing and laying rectified glazed ceramic floor tiles 300 x 300 mm or more ( thickness to be specified by the manufacturer ) of 1st quality conforming to IS : 15622 of approved make in all colours, shades except white, ivory, grey, fume red, brown over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. | 120017 | 88.2 | Sqm. |
| 18 | 18 | 12 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete. A) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) | 120018 | 38.4 | Nos. |
| 19 | 19 | 15 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete.In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) | 120019 | 63 | Nos. |
| 20 | 20 | Neat cement punning. | 120020 | 47.2 | Sqm. |
| 21 | 21 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including a priming coat of cement primer to give an even shade complete. | 120021 | 355 | Sqm. |
| 22 | 22 | Finishing walls with textured exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 3.28 litre/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. | 120022 | 390 | Sqm |
| 23 | 23 | Applying priming coat:b) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work. | 120023 | 63.6 | Sqm. |
| 24 | 24 | Finishing with epoxy paint ( two or more coats ) of approved brand and manufacture at all locations prepared and applied as per manufacturer's specification on new work including appropriate priming coat, preparation of surface etc. complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] 12.36.1 On steel work | 120024 | 63.6 | Sqm. |
| 25 | 25 | Grading roof for water proofing treatment [Payment shall be made after submission of the product performance shall carry guaranteed for 7 years against any leakage] complete as required as per direction of the Engineer-in-charge with. Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) | 120025 | 6.132 | Cum |
| 26 | 26 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. | 120026 | 1 | Sqm. |
| 27 | 27 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid | 120027 | 1 | Cum |
| 28 | 28 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. | 120028 | 1 | Cum |
| 29 | 29 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: Flat back wash basin of size 550x400mm. | 120029 | 1 | Nos. |
| 30 | 30 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 120030 | 2 | Nos. |
| 31 | 31 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms | 120031 | 2 | Nos. |
| 32 | 32 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms | 120032 | 1 | Nos. |
| 33 | 33 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. | 120033 | 2 | Nos. |
| 34 | 34 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore | 120034 | 3 | Nos. |
| 35 | 35 | Providing and fixing brass stop cock of approved quality : 15 mm dia nominal bore | 120035 | 1 | Nos. |
| 36 | 36.1 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): a) 25 mm nominal bore | 120036 | 1 | Nos. |
| 37 | 36.2 | b) 40 mm nominal bore | 120037 | 1 | Nos. |
| 38 | 37.1 | Providing and fixing gun metal non-return valve of approved quality (screwed end):a) 25 mm nominal bore Vertical | 120038 | 2 | Nos. |
| 39 | 37.2 | b) 40 mm nominal bore Vertical | 120039 | 1 | Nos. |
| 40 | 38 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | 120040 | 1000 | Nos. |
| 41 | 39 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. | 120041 | 1 | Nos. |
| 42 | 40 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required: II. In stringers, treads, landing etc. of stair cases including use of chequered plate wherever required, all complete | 120042 | 515 | kg |
| 43 | 41 | Providing and fixing hand rail using structural steel etc. of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as required: II. G.I.pipes. | 120043 | 220 | kg |
| 44 | 42 | Providing and fixing hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62 x 19 mm beading of Gamair wood | 120044 | 93.6 | sqm |
AI Tender Summary
Tender Timeline
Dec 17, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedJan 06, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 10, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender