Tender For 136/Ae/Lsgd/19-20 Karunagappally Municipality Muslim Lps Vayarath Jn Road Rettaring Div 11
Tender Value
13.35 Lakhs
Estimated cost
Bid Submission
26 Dec 2019
0 days left
EMD
33380
Bank guarantee accepted
Document Fee
2800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
karunagappally → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
tender for 136 / ae / lsgd / 19-20 karunagappally municipality muslim lps vayarath jn road rettaring div 11
BOQ
| Work Name:KARUNAGAPPALLY MUNICIPALITY 2019-20- PROJECT NO.136/20 MUSLIM LPS JN VAYARATH JN ROAD RETARRING DN-11 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Retarring | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 75.5.5.B.2pb : Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates\n<br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. | BI01010001010000000000000515BI0100001114 | 299.173 | sqm |
| 3 | 1.002 | 75.5.2.1pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | BI01010001010000000000000515BI0100001115 | 2400 | sqm |
| 4 | 1.003 | 75.5.9.2.2.Pd : Plastic Roads - Bitumen - S-65 <br> 20 mm thick Open- Graded Premix Carpet using Bituminous ( Penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearinf course on a previously prepared base, including mixing in a suitable plant,laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B Type C as Techinical Specification Clause 508 (with 7% of bitumen replaced by shreadded waste plastice) <br> Case - I By Manual Means <br> <br> (II) Bitumen (S-65) ( VG-30) | BI01010001010000000000000515BI0100001116 | 2400 | sqm |
| 5 | 1.004 | 75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510\t<br>\nA.\tBy Manual Means\t<br>\nCase III : Type C\t<br>\t\t\t\n(II)\tBitumen (S-65) | BI01010001010000000000000515BI0100001117 | 2400 | sqm |
| 6 | 2 | berm concreting | BI01010001010000000000000515BI0100001118 | ||
| 7 | 2.001 | od282048/2019_2020 : od46757/2019_2020 :Surface dressing of the ground in all kinds of soil including removing vegitation and inequalities<br>not exceeding 15cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5m | BI01010001010000000000000515BI0100001119 | 423 | sqm |
| 8 | 2.002 | od282049/2019_2020 : construction of plain cement concrete pavement thickness of asper design over prepared subgrade/sub b ase with 43 grade cement or any other typeas per clause 1501.2.2M 20grade, caorse agregate conforming ti IS 383 maximum size of coarse aggrgatenot exeeding 25mm muxed inconcrete mixer fo not less trhan.2cum capacity and appropriate weigh bather using approved mix design laid in approved fixed side form work (steel channel wedges steelplates including vibrtor andfinished in continous operation includuing provision of constuction expansion jionts curing of concrete slab for14 days with water finished to lines and grade as per drawingTEChnicalspecificationclause1501. | BI01010001010000000000000515BI0100001120 | 63.45 | cum |
AI Tender Summary
Tender Timeline
Dec 16, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 26, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 01, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender