| 1 | 1 | Earth work excavation in hard soil for foundation within initial lead of 50 m and initial lift of 1.5 m including rough dressing and levelling the bed as per the specification approved by the department and direction of Engg -in- charge. | | 23.98 | cum |
|---|
| 2 | 2 | Convaying the exacavated Earth away from the work site by mechnical means with in 5 km lead as per direction of EIC. | | 21.58 | cum |
|---|
| 3 | 3 | Filling in foundation with sand well watered & rammed including cost, conveyance, royalty & taxes etc. complete of all materials to work site as the specification approved by the department and direction of Engg-in-charge. | | 15.73 | cum |
|---|
| 4 | 4 | C.C (1:4:8) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. | | 7.33 | cum |
|---|
| 5 | 5 | R.C.C (1:1.5:3) with 12mm size Cresher broken chips including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. \nA)Column Footing | | 5.51 | cum |
|---|
| 6 | 5.015 | B)Column | | 0.78 | cum |
|---|
| 7 | 5.02 | C)Plinth band pendi for yoga | | 3.38 | cum |
|---|
| 8 | 5.03 | C)Lintel | | 0.39 | cum |
|---|
| 9 | 5.04 | D) Roof | | 0.88 | cum |
|---|
| 10 | 6 | Supplying fitting placinguncoated HYSD reinforcecement,including, cutting bending, binding ,& placing, the steal rods as per drawing technical speci fications with cost of binding wire 18 to 20 gauges etc complete. | | 15 | qntl |
|---|
| 11 | 7 | Fly ash brick masonry in C.M. (1:6) in founadtion & plinth using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. | | 15.81 | cum |
|---|
| 12 | 8 | Fly ash brick work in C.M. (1:6) in super structure using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. | | 8.38 | cum |
|---|
| 13 | 9 | C.C (1:1.5:3) with 12mm to 20mm size Cresher broken chips including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. | | 4.45 | cum |
|---|
| 14 | 10 | 12mm thick C:P (1:6) over brick workIncluding all cost conveyance , Royalty & taxes etc. complete of all materials to work site as per specification approved of E.I.C. | | 48.59 | sqm |
|---|
| 15 | 11 | 16mm thick C:P (1:6) over brick work Including all cost conveyance , Royalty & taxes etc. complete of all materials to work site as per specification approved of E.I.C. | | 58.32 | sqm |
|---|
| 16 | 12 | Supplying fitting fixing of M.S Grill including cost of material & labour charges etc complete. | | 648 | kg |
|---|
| 17 | 13 | Painting 2 coat weather coat over a coat of primer including cost of material and labour charges etc complete. | | 106.91 | sqm |
|---|
| 18 | 14 | Painting 2 coat enamal paint over a coat of primer including cost of material and labour charges etc complete. | | 36 | sqm |
|---|
| 19 | 15 | Supplying fitting fixing of M.S trust with I section pole including cost of material & labour charges etc complete.\n | | 2165.54 | kg |
|---|
| 20 | 16 | Supplying fitting fixing of Galvanise sheet of TATA make of 5 mm thick etc complete. | | 54.9 | sqm |
|---|
| 21 | 17 | Supplying fitting fixing of Ridge sheet of TATA make of 5 mm thick etc complete. | | 7 | no |
|---|
| 22 | 18 | Supplying all materials, labour, T&P for fitting and fixing of 2000Ltrs capacity Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701--1996 over head water storage tank of Sintex make with tank cover including lock and key arrangement etc. all complete as per direction of Engineer-in-charge. | | 1 | no |
|---|
| 23 | 19 | Supplying all materials, labours, T&P for construction of brick massonry staging for installation of 1000ltrs capacity Sintex tank with flyash brick work with C.M.(1:6) up to reqd. height & length & plastering with C.M.(1:4) including white washing two coats with shell lime & colour washing 1 coat with shell lime & colouring materials, providing RCC slab of 10cm. thick and 0.30m.x0.25m. size & 2.60m. long RCC beam with CC(1:1.5:3) using 12mm. HG chips including centering & shuttering & providing 1st class flyash brick work with C.M.(1:6) circular dia. upto a height of 46cm. over the slab to support the tank including conveyance of all materials to worksite watering, curing, royalty, taxes etc. all complete as per P.H.D. specification and direction of the Engineer in charge. (On the roof of the G. floor) | | 1 | no |
|---|
| 24 | 20 | Supplying fitting fixing of single pannel Rajashree make PVC door with choukath incluidng cost of all fittings, labour charges, T&P etc. all complete as per direction of Engineer-in-charge. | | 3.15 | sqm |
|---|
| 25 | 21 | Cutting grooves in brick masonry wall / pucca floor for taking G.I. pipes and making good to the damages etc. all complete as per direction of Engineer-in-charge. | | 15 | rmt |
|---|
| 26 | 22 | Supplying all materials, labour, T&P conveyances, fitting and fixing the following nominal bore G.I. / P.V.C. Pipe to walls / ceiling / floor with required G.I. Fittings including cutting the pipes and threading, making good the damage all complete as per direction of Engineer-in-charge | | 23 | rmt |
|---|
| 27 | 23 | Supplying all materials, labour, T&P and fixing of following P.H. fittings of approved make including supplying of all necessary jointing materials all complete as per approved specification and direction of Engineer-in-charge.\na)15mm dia. C.P. short body bib cock.(Amber Delux) | | 4 | no |
|---|
| 28 | 23.01 | B)15mm dia C.P. long body bib cock (Amber Delux) | | 2 | no |
|---|
| 29 | 23.02 | C)15mm dia. C.P. Angle stop cock.(Amber Delux) | | 2 | no |
|---|
| 30 | 23.03 | D) 125mm dia CP grating | | 6 | no |
|---|
| 31 | 23.04 | e)23\" long Orissa pan with 'P' trap (Nycer / Parryware | | 2 | no |
|---|
| 32 | 23.05 | f) 23\" long EWC with 'S' trap including Seat cover(Nycer / Parryware) | | 2 | no |
|---|
| 33 | 23.06 | g)10 ltrs. Capacity P.V.C. Low level cistern with 32mm dia. PVC Long flush bend (Parryware slim line). | | 2 | no |
|---|
| 34 | 23.07 | h)CP Soap holder | | 2 | no |
|---|
| 35 | 23.08 | i)25 mm UPVC-ASTM Ball Valve | | 2 | no |
|---|
| 36 | 23.09 | j) 40 mm UPVC-ASTM Ball Valve | | 1 | no |
|---|
| 37 | 23.1 | k)25 mm PVC Ball Cock | | 1 | no |
|---|
| 38 | 24 | Providing and fixing in position FRP Plain Slide of approved design and make of minimum 6.0meter x 1.0meter size (Safe play area minimum 7meter X 2 meter ) and overall minimum height of 2.1 meter from ground consisting of: \n1. SLIDE CHUTE (UV stabilized HDPE Roller Mat with nylon bush)\n2. MAIN FRAME (MS angle 50mm X 50mm X 5mm, handrail 25NB GI pipe)\n3. LADDER FRAME ( 25NB & 20NB Frame GI pipe )\n4. Small H-Support (25NB GI Pipe length 600mm with 10mm tor rod of length 300mm )\n5. CENTRAL SUPPORT : (80NB hot dip galvanized pipe of length 1980mm confirming to IS 1239 with GI thickness of 60micron)\n6. PLATFORM: (16 SWG GI Plate of Size -500 X 450 X60mm, 5000mm X 90mm (Cold formed 16 gauge GI plated Sheet Steps confirming to En1176-1:1998,550mm high Guard Railing. ) | | 1 | no |
|---|
| 39 | 25 | Supplying the following making Garden equipments including fixing at work site etc complete as per direction of EIC. 3 seater concrete chair. | | 6 | each |
|---|
| 40 | 26 | Providing & Fixing in position self standing FRP frong/Animal shape dustbin of approved design and make of minimum height of 0.85 mtr dia 0.60 mtr dia design for accomandating dry as well as wet kind of trash in the garden made out of in pure polyster fiberglass rainforced plastic of 2mm thick with matt finish. | | 4 | no |
|---|
| 41 | 27 | Providing and fixing in position FRP Merry Go Round (MGR) of approved design and make of minimum area 1.8m dia, (safe play area minimum 3.0m dia), overall minimum of 900mm height from ground consisting of :\n1. FRP PLATFORM (Minimum 5mm Thick, 1800mm dia with checkered texture)\n2. PLATFORM SUPPORTING (Structured frame of IAS-40x40x5 & 25x25x5, ISF-130x50x10 & 65x50x5 welded together , Triangular frame. Of 75x40x5 C Channel ),\n3. CENTER SUPPORT (80NB 500mm long GI pipe with 150x 150mm base plate, with Ball Bearing no. 6209Z and Taper Roller Bearing no. 30209) | | 1 | no |
|---|
| 42 | 28 | Providing and fixing in position leg PRESS of approved design and make of minimum product size 72(h),68(L),24\"(W)(Safe play area minimum 2.2m X1.9m ) consisting of\n1. VERTICAL SUPPORT :(80NB hot dip GI pipe of minimum length of 2800mm with two arch swing flanges welded at both the end )\n2. SEAT:(FRP /HDPE/LLDP , seat frame hinged over vertical support pipe through 40NB GI pipe)\n3. HANDLE PIPE: (25NB GI pipe linked to the seat with 40NB pipe hinged to main vertical support pipe with rubber handle grip at its both ends.)\n4. All open ends of pipe been closed by GI / HDPE caps.\n | | 1 | each |
|---|
| 43 | 29 | Air Skier (60''(H),36;;(l),36''(w) | | 1 | each |
|---|
| 44 | 30 | Air walker (45''(H),44;;(l),12''(w) | | 1 | each |
|---|
| 45 | 31 | Supplying fitting fixing of body rotater of approved design in proper position including cost of fitting fixing & labour charges,etc conplete as per direction of EIC. | | 1 | no |
|---|
| 46 | 32 | Supplying fitting fixing of body twister 48''(h),5'(w) of approved design in proper position including cost of fitting fixing & labour charges,etc conplete as per direction of EIC. | | 1 | no |
|---|
| 47 | 33 | Tai chi spiner 54''(H),48''(L),48''(W) | | 1 | no |
|---|
| 48 | 34 | Fixing tiles & Glazed /Ceramic in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles etc. (Data for 10 sq.mt.) | | 44.51 | sqm |
|---|
| 49 | 35 | Fixing tiles & Glazed /Ceramic in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. per 1 sqm (Data for 10 sq.mt.) | | 48.59 | sqm |
|---|
