Supply, Install & Commissioning Of Tools, Equipments And Machineries For Fitter Trade At Mahasainik Industrial Estate, Bhosari Midc, Pune 411026
Tender Overview
Project Description
Supply, Install & Commissioning Of Tools, Equipments And Machineries For Fitter Trade At Mahasainik Industrial Estate, Bhosari Midc, Pune 411026-1 Steel Rule 15 Cm With Metric & British Graduation - 150 Mm, Stainless Steel 2 Try Square 15 Cm Blade. - 150 Mm 3 Caliper Inside 15 Cm Spring - 150 Mm 4 Caliper 15 Cm Hermaphrodite - 150 Mm 5 Caliper Outside 15 Cm Spring - 150 Mm 6 Divider 15 Cm Spring - 150 Mm 7 Straight Scriber 15 Cm. - 150 Mm 8 Centre Punch 10 Cm - 10 Mm And Length 120 Mm 9 Screw Driver 15 Cm - 150 Mm Insulated Flat Type 10 Chisel Cold Flat - 20 Mm X 150 Mm High Carbon Steel 11 Hammer Ball Peen With Handle - 0.45 Kg. ( 1 Lb ) 12 Hammer Ball Peen With Handle - 0.22 Kg. ( 1 / 2 Lb ) 13 File Flat 25 Cm. Second Cut - 250 Mm 14 File Flat 25 Cm. Smooth - 250 Mm 15 File Half Round Second Cut 15 Cm. - 150 Mm 16 Hacksaw Frame Fixed 30 Cm. - 300 Mm 17 Safety Goggles. 18 Dot Slot Punch 10 Cm. - 100 Mm 19 Steel Rule 30 Cm Graduated Both In Metric And English Unit - 300 Mm 20 Straight Edge Steel - 300 Mm Or Above 21 Spirit Level Metal Type - 2 ( 300 Mm Basic Length Accuracy 0.1 Mm / Meter ) 22 Stud Extractor Ezy – Out Set 0F 8 23 Combination Set 30 Cm. - 300 Mm 24 Micrometer 0 – 25 Mm Outside. 25 Micrometer 25 – 50 Mm Outside. 26 Micrometer 50 –75 Mm Outside. 27 Micrometer Inside 25 - 50 Mm With Extension Rods. ( Accuracy 0.01 Mm With Extension Rods Upto 150 Mm ) 28 Vernier Caliper 15 Cm -150 Mm 29 Vernier Height Gauges 30 Cm - 300 Mm 30 Vernier Bevel Protractor Blade With Acute Angle Attachment 31 Screw Pitch Gauge - 0.25 To 6 Mm 32 Wire Gauge, Metric Standard. 33 Surface Plate Ci / Granite With Stand And Cover - 600 X 600 Mm 34 Marking Table ( Mild Steel ) 900 X 900 X 900 Mm. 35 Universal Scribing Block 22 Cm - 220 Mm 36 V-Block Pair With Clamps - 150 X 100 X 100 Mm 37 Angle Plate - 150X 150 X 250 Mm 38 Punch Letter 3 Mm Set. 39 Punch Number Set 3 Mm. 40 Portable Hand Drill ( Electric ) 0 To 13 Mm Capacity 41 Drill Twist Straight Shank 3 Mm To 12 Mm By 0.5 Mm H.S.S 42 Drill Twist Taper Shank 8 Mm To 20 Mm By 0.5 Mm H.S.S 43 Taps And Dies Complete Set In Box With-Worth. 44 Taps And Dies Complete Set In Box 5, 6, 8, 10, & 12 Mm Set Of 5 45 File Knife Edge 15 Cm Smooth - 150 Mm 46 File Feather Edge 15 Cm Smooth - 150 Mm 47 File Triangular 20 Cm Smooth - 200 Mm 48 File Round 20 Cm Second Cut - 200 Mm 49 File Square 25 Cm Second Cut - 250 Mm 50 Feeler Gauge - Gauge Feeler / Thickness - 0.05 Mm To 0.3 Mm By 0.05 And 0.4Mm To 1 Mm By 0.1 Mm - 13 Leaves 51 File Triangular 20 Cm Second Cut. - 200 Mm 52 File Flat 30 Cm Second Cut Safe Edge - 300 Mm 53 File Flat 20 Cm Bastard - 200 Mm 54 File Flat 30 Cm Bastard - 300 Mm 55 File Swiss Type Needle Set Of 12. Length - 150 Mm 56 File Half Round 25 Cm Second Cut. - 250 Mm 57 File Half Round 25 Cm Bastard. - 250 Mm 58 File Round 25 Cm Bastard. - 250 Mm 59 File Hand 15 Cm Second Cut. - 150 Mm 60 File Card - 3 X 5 Size , Brass Or Steel Wire 61 Oil Can 0.25 Liters. - 250 Ml 62 Pliers Combination 15 Cm - 150 Mm 63 Wooden Handle Forged Soldering Iron Copper Bit - 230 V, 250 W, 350 Gm 64 Blow Lamp 0.50 Liters. 65 Spanner D.E. 6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22 - 1 Set Each 66 Spanner Adjustable 15 Cm - 150Mm 67 Interchangeable Ratchet Socket Set With A 12 Mm Driver, Sized10-32 Mm Set Of 18 Socket & Attachments. 68 Double Ended Tubular Box Spanner Set 6-25 Mm Set Of 8 With Tommy Bar. 69 Glass Magnifying 7.5 Cm - 75 Mm 70 Clamp Toolmaker 5 Cm And 7.5 Cm Set Of 2. 71 Clamp “C” 10 Cm - 100 Mm 72 Clamp “C” 20 Cm - 200 Mm 73 Hand Reamer Set ( Tapar Pin Straigh Flute ) Nominal Dia 6, 8, 10, 12, 16 M 74 Machine Reamer Parallel ( Helical Flute ) 12 - 16Mm Set Of 5. 75 Scraper Flat 15 Cm. - 150 Mm 76 Scraper Triangular 15 Cm 77 Scraper Half Round 15Cm 78 Chisel Cold 9 Mm Cross Cut 9 Mm X 150 Mm Diamond. 79 Chisel Cold Flat 9 Mm X 100 Mm 80 Chisel Cold Round Noze. 9 Mm X 100 Mm 81 Drill Chuck With Key 12 Mm. 82 Pipe Wrench 40 Cm - 400 Mm 83 Pipe Vice 100Mm 84 Adjustable Pipe Tap Set Bsp With Die Set Cover Pipe Size 1 Or 3 / 4 85 Wheel Dresser ( One For 4 Units ) . Star / Dresser With Holder 86 Machine Vice - Swivel Base 10 Cm -100 Mm 87 Machine Vice 125 Mm 88 Sleeve Drill Morse 0 - 1, 1 - 2, 2 - 3., 3-4, 4-5 89 Vice Bench 15 Cm Jaws - 150 Mm 90 Bench Working 240 X 120 X 90 Cm. 91 Almirah 180 X 90 X 45 Cm. 92 Lockers With 8 Drawers ( Standard Size ) . 93 Metal Rack 182 X 182 X 45 Cm 94 Instructor Table 95 Instructor Chair 96 Black Board With Easel. 97 Fire Extinguisher ( For 4 Units ) Co2 Type, 3Kg Capacity 98 Fire Buckets. 99 Machine Vice 100Mm. 100 Wing Compass 25.4 Cm Or 30 Cm. 101 Hand Hammer 1 Kg. With Handle. 102 Torque Wrench ( Standard / Ratchet Type ) ( 14 To 68 Nm ) 103 Power Tools For Fastening Capacity 10-18 Mm 104 Different Profile Gauges ( Plat Type ) - For Demonstration Metric Standard 105 Knurling Tool ( Diamond, Straight & Diagonal ) 106 Indexable Boring Bar With Inserts - 1 Shank 107 Machine Maintenance Mannual For Lathe, Npedestal Grinder, Drill Machine, Power Saw N 108 Temperature Gauge Range 0 - 150°C 109 Dowel Pin ( Straight ) Dia. -1 Length -4 ( Mat: Nstainless Steel ) N 110 Standard Tap Screws M3, M4, M5, M6, M8, M10, M12, Nm14, M16 N 111 Lapping Plate Dia. -6 112 Medium Carbon Heat Treated Alloy Steel Metric Studs And Bolts Along With Nuts ( For Display ) Of Standard Length ( May Be Manufactured In-House ) M6, M8, M10, M12, M14, M16 N ( Standard ) N N 113 Caps Screws M6, M8, M10, M12 114 Drill Gauges Letter Drill Gauge ( A To Z ) , Number Drill Gauge ( 1 To 60 ) , Metric Drill Gauge ( 1.5Mm To 12.5Mm, 30 Holes ) N 115 Cast Iron Globe Valve ( Flanged Type ) 150Nb, Class# 150 Flange: Ansi125-B16.1 N 116 C.I. Sluice / Gate Valve ( Flanged Type ) 150Nb, Class# 150 Nflange:Ansi125-B16.1 N 117 Stop Cock 25Nb ( 2-Way, Threaded End ) 118 M.S. Pipe 150Nb, Sch.40, Erw, Is:1239 119 G.I. Pipe 25Mm, Sch.40, Erw 120 Slip-On Forged Steel Flange 150Nb, Ansi-B16.5, Class#150 121 Bolt & Nut With Washer ( May Be Nmanufactured In-House ) M20x2.5X90 Long ( Part Thread - Nhex. Head ) N N 122 Pipe Threading Die With Handle Ratchet Type Die Head Of 1 / 2 , 3 / 4 And 1 N 123 Jigs & Fixture ( Sample ) -For Demonstration N ( May Be Manufactured In-House ) N 124 M. S. Shaft ( May Be Manufactured In-House ) Bright M.S. Round Bar ? 80Mm, 600Mm Long, Stepped ?? 0Mm On 300Mm One End N 125 Pulleys ( For V-Belt Or Flat Belt ) To Fit On 50Mm Dia. Shaft With Key Slot 126 Steel Keys ( May Be Manufactured In-House ) To Fit With Keyslot Of Shaft & Pulley N 127 Damaged Old Spur Gear To Fit 50Mm Dia. Shaft 128 V-Belt And Flat Belt To Fit On Pulley 129 Packing Gasket Ptfe Gasket Roll Small Size 130 Washer, Clutch, Keys, Jib, Cotter & Circlip Minimum 25Mm Size, Carbon Steel Material N 131 Hollow Punch Straight Shank Hollow Punch Sets N5-12Mm N 132 Drill Drift ( May Be Manufactured In-House ) 200Mm Hardened And Black Finish 133 Bearing Different Types Each Type Of Diameter 25Mm N ( Min. ) N 134 Lifting Sling 8Mm Nominal Dia. Single Leg Sling N 135 Bearing Extractor Universal Gear Puller 2 Or 3 Jaws Nadjustable N 136 Pulley Extractor Universal Gear Puller 2 Or 3 Jaws Nadjustable N 137 Trammel 30Cm. - 300 Mm 138 Pocker. 139 Prick Punch 140 Mallet. 141 Aviation Snips Straight Cut 30 Cm - 300 Mm. 142 Flat Head Hammers With Handle. 143 Planishing Hammer. 144 Snip Bent Left Cut 25 Cm. - 250 Mm 145 Stake Hatchet With Leg 300X200x20 Mm 146 Stake Grooving 100X100x300 Mm 147 Slip Gauge As Johnson Metric Set. 87 Pieces Set 148 Gauge Snap Go And Not Go 25 To 50 Mm By 5Mm. Set Of 6 Pcs. 149 Gauge Plug Single Ended 5 To 55 By 5 Mm. Set Of 11 Pcs. 150 Gauge Telescopic Upto 8-150 Mm. 151 Dial Test Indicator .01 Mm On Stand 152 Sine Bar 125 Mm. 153 Dial Vernier Caliper 0 – 300 Mm Lco 0.05 Mm. ( Universal Type ) . 154 Screw Thread Micrometer With Interchangeable 0-25Mm. Pitch Anvils For Checking Metric Threads 60 155 Depth Micrometer 0-25 Mm. Accuracy 0.01 Mm With Standard Set Of Extension Rods Upto 200 Mm 156 Vernier Caliper 0-150 Mm. L.C. 0.02 Mm. 157 Digital Micrometer 0 – 25 Mm Outside. L.C. 0.001 Mm. 158 Comparators Gauge Dial Indicator With Stand And Bracket Lc 0.01Mm. 159 Engineer?S Try Square ( Knife-Edge ) 150 Mm Blade. 160 Surface Roughness Comparison Plates N1-N12 Grade 161 Digital Vernier Caliper 0-200 Mm. L.C. 0.001 Mm. ( Optional ) 162 Vernier Bevel Protector Range 360Deg, Lc. : 5Min ( 150Mm Blade ) N 163 Carbide Wear Block 1 Mm - 2 Mm 164 Lathe Tools H.S.S. Tipped Set. 165 Lathe Tools Bit 6 Mm X 75 Mm Hss / Carbide 166 Lathe Tools Bit 8 Mm X 75 Mm. Hss / Carbide 167 Lathe Tools Bit 10 Mm X 85Mm. Hss / Carbide 168 Arm Strong Type Tool Bit Holder Right.Hand. 169 Arm Strong Type Tool Bit Holder Left.Hand. 170 Arm Strong Type Tool Bit Holder Straight. 171 Stilson Wrenches 6 Mm To 25 Mm 172 Pipe Cutter 6 Mm To 50 Mm Wheel Type. 173 Pipe Bender Machine Spool Type Up To 25 Mm Cold Bending. With Stand Manually Operated. 174 Adjustable Pipe Chain Tonge To Take Pipes Up To 300 Mm. 175 Adjustable Spanner 38 Cm Long.- 380 Mm 176 Ss And Sc Centre Lathe ( All Geared ) With Minimum Specification As: Centre Height 150 Mm And Centre Distance 1000 Mm Along With 3 & 4 Jaw Chucks, Auto Feed System, Safety Guard, Taper Turning Attachment, Motorized Coolant System, Lighting Arrangement & Standard Accessories. 177 Drilling Machine Pillar Sensitive 0-20 Mm Cap With Swivel Table Motorised With Chuck & Key. ( Pls Refer Terms & Conditions For Detailed Technical Specifications ) 178 Drilling Machine Bench - Sensitive 0-12 Mm Cap Motorised With Chuck And Key. 179 D.E. Pedestal Grinding Machine With 200Mm Diameter Wheels Rough And Smooth With Twist Drill Grinding Attachment. ( Ps Refer Terms & Conditions For Detailed Technical Specifications ) 180 Transformer Welding Set Continuous Welding Current, With All Accessories And Electrode Holder 60% Duty Cycle With Standard Accessories - 300 A, Ocv 60-100 V 181 Welder Cable To Carry 300 Amps. With Flexible Rubber Cover 182 Lugs For Cable 183 Earth Clamps. 184 Arc Welding Table ( All Metal Top ) 1200 Mm X 1200 Mm X 750 Mm With Positioner 185 Oxy - Acetylene Gas Welding Set Equipment With Hoses, Oxygen & Acetylene Cylenders, Regulator And Other Accessories. 186 Gas Welding Table With Positioner With Fire Bricks N 187 Welding Torch Tips Of Different Sizes For Oxy - Acetylene Gas Welding To Fit Nozzel No 1, 2, & 3 188 Gas Lighter. 189 Trolley For Gas Cylinders. 190 Chipping Hammer. 191 Gloves ( Leather ) 192 Leather Apron. 193 Spindle Key For Cylinder Valve. 194 Welding Torches Nozzles No 1, 2, & 3. 195 Welding Goggles 196 Welding Helmet With Coloured Flame Retardent Glass 197 Tip Cleaner 198 Compressor Unit : Please Refer Technical Specification For Detail Specifications 199 Pneumatic Trainer Kit, Each Consisting Of The Following Matching Components And Accessories: Please Refer Technical Specification For Detail Specifications 200 Cut Section Model For Pneumatic Components 201 Hydraulic Trainer Kit, Each Consisting Of The Following Matching Components And Accessories: Please Refer Technical Specification For Detail Specifications 202 Cut-Section Models For Hydraulic Components
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Jan-2020 | Date Extension | Date | 20-Jan-2020 |
| 2 | 18-Jan-2020 | DateExtension2 | Date | 10-Feb-2020 |
BOQ
| Name of Work: SUPPLY, INSTALL & COMMISSIONING OF TOOLS, EQUIPMENTS AND MACHINERIES FOR FITTER TRADE AT MAHASAINIK INDUSTRIAL ESTATE, BHOSARI MIDC, PUNE 411026 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Steel Rule 15 cm with metric & British graduation - 150 mm, Stainless Steel | item1 | 17 | Nos |
| 2 | 2 | Try Square 15 cm blade. - 150 mm | item2 | 17 | Nos |
| 3 | 3 | Caliper inside 15 cm spring - 150 mm | item3 | 17 | Nos |
| 4 | 4 | Caliper 15 cm hermaphrodite - 150 mm | item4 | 17 | Nos |
| 5 | 5 | Caliper outside 15 cm spring - 150 mm | item5 | 17 | Nos |
| 6 | 6 | Divider 15 cm spring - 150 mm | item6 | 17 | Nos |
| 7 | 7 | Straight Scriber 15 cm. - 150 mm | item7 | 17 | Nos |
| 8 | 8 | Centre Punch 10 cm - 10 mm and Length 120 mm | item8 | 17 | Nos |
| 9 | 9 | Screw driver 15 cm - 150 mm insulated flat type | item9 | 17 | Nos |
| 10 | 10 | Chisel cold flat - 20 mm X 150 mm High Carbon Steel | item10 | 17 | Nos |
| 11 | 11 | Hammer ball peen With handle - 0.45 kg. (1 lb) | item11 | 17 | Nos |
| 12 | 12 | Hammer ball peen With handle - 0.22 kg. (1/2 lb) | item12 | 17 | Nos |
| 13 | 13 | File flat 25 cm. second cut - 250 mm | item13 | 17 | Nos |
| 14 | 14 | File flat 25 cm. smooth - 250 mm | item14 | 17 | Nos |
| 15 | 15 | File half round second cut 15 cm. - 150 mm | item15 | 17 | Nos |
| 16 | 16 | Hacksaw frame fixed 30 cm. - 300 mm | item16 | 17 | Nos |
| 17 | 17 | Safety goggles. | item17 | 17 | Nos |
| 18 | 18 | Dot slot punch 10 cm. - 100 mm | item18 | 17 | Nos |
| 19 | 19 | Steel Rule 30 cm Graduated both in Metric and English Unit - 300 mm | item19 | 4 | Nos |
| 20 | 20 | Straight edge steel - 300 mm or above | item20 | 2 | Nos |
| 21 | 21 | Spirit Level metal Type - 2 (300 mm Basic length accuracy 0.1 mm/Meter) | item21 | 1 | Nos |
| 22 | 22 | Stud Extractor EZY – out Set 0f 8 | item22 | 2 | Sets. |
| 23 | 23 | Combination Set 30 cm. - 300 mm | item23 | 2 | Nos |
| 24 | 24 | Micrometer 0 – 25 mm outside. | item24 | 2 | Nos |
| 25 | 25 | Micrometer 25 – 50 mm outside. | item25 | 2 | Nos |
| 26 | 26 | Micrometer 50 –75 mm outside. | item26 | 2 | Nos |
| 27 | 27 | Micrometer inside 25 - 50 mm with extension rods. (Accuracy 0.01 mm with extension rods upto 150 mm) | item27 | 1 | Nos |
| 28 | 28 | Vernier caliper 15 cm -150 mm | item28 | 4 | Nos |
| 29 | 29 | Vernier height gauges 30 cm - 300 mm | item29 | 1 | Nos |
| 30 | 30 | Vernier bevel protractor blade with Acute Angle attachment | item30 | 1 | Nos |
| 31 | 31 | Screw pitch gauge - 0.25 to 6 mm | item31 | 1 | Nos |
| 32 | 32 | Wire gauge, metric standard. | item32 | 1 | Nos |
| 33 | 33 | Surface plate CI / Granite with Stand and Cover - 600 x 600 mm | item33 | 1 | Nos |
| 34 | 34 | Marking table (Mild Steel) 900 x 900 x 900 mm. | item34 | 1 | Nos |
| 35 | 35 | Universal scribing block 22 cm - 220 mm | item35 | 2 | Nos |
| 36 | 36 | V-Block pair with clamps - 150 x 100 x 100 mm | item36 | 2 | Nos |
| 37 | 37 | Angle plate - 150x 150 x 250 mm | item37 | 2 | Nos |
| 38 | 38 | Punch letter 3 mm set. | item38 | 1 | Nos |
| 39 | 39 | Punch number set 3 mm. | item39 | 1 | Nos |
| 40 | 40 | Portable hand drill (Electric) 0 to 13 mm Capacity | item40 | 1 | Nos |
| 41 | 41 | Drill twist straight shank 3 mm to 12 mm by 0.5 mm H.S.S | item41 | 2 | Sets. |
| 42 | 42 | Drill twist taper shank 8 mm to 20 mm by 0.5 mm H.S.S | item42 | 2 | Sets. |
| 43 | 43 | Taps and dies complete set in box With-worth. | item43 | 1 | Nos |
| 44 | 44 | Taps and dies complete set in box 5, 6, 8, 10, & 12 mm set of 5 | item44 | 2 | Sets. |
| 45 | 45 | File knife edge 15 cm smooth - 150 mm | item45 | 4 | Nos |
| 46 | 46 | File feather edge 15 cm smooth - 150 mm | item46 | 4 | Nos |
| 47 | 47 | File triangular 20 cm smooth - 200 mm | item47 | 8 | Nos |
| 48 | 48 | File round 20 cm second cut - 200 mm | item48 | 8 | Nos |
| 49 | 49 | File square 25 cm second cut - 250 mm | item49 | 8 | Nos |
| 50 | 50 | Feeler gauge - Gauge Feeler /Thickness - 0.05 mm to 0.3 mm by 0.05 and 0.4mm to 1 mm by 0.1 mm - 13 leaves | item50 | 1 | Set |
| 51 | 51 | File triangular 20 cm second cut. - 200 mm | item51 | 8 | Nos |
| 52 | 52 | File flat 30 cm second cut safe edge - 300 mm | item52 | 8 | Nos |
| 53 | 53 | File flat 20 cm bastard - 200 mm | item53 | 10 | Nos |
| 54 | 54 | File flat 30 cm bastard - 300 mm | item54 | 10 | Nos |
| 55 | 55 | File Swiss type needle set of 12. Length - 150 mm | item55 | 2 | Sets. |
| 56 | 56 | File half round 25 cm second cut. - 250 mm | item56 | 10 | Nos |
| 57 | 57 | File half round 25 cm bastard. - 250 mm | item57 | 10 | Nos |
| 58 | 58 | File round 25 cm bastard. - 250 mm | item58 | 10 | Nos |
| 59 | 59 | File hand 15 cm second cut. - 150 mm | item59 | 8 | Nos |
| 60 | 60 | File Card - 3\" x 5 \" size , brass or steel wire | item60 | 8 | Nos |
| 61 | 61 | Oil Can 0.25 liters. - 250 ml | item61 | 2 | Nos |
| 62 | 62 | Pliers combination 15 cm - 150 mm | item62 | 2 | Nos |
| 63 | 63 | Wooden handle forged Soldering iron copper bit - 230 V, 250 W, 350 gm | item63 | 2 | Nos |
| 64 | 64 | Blow Lamp 0.50 liters. | item64 | 2 | Nos |
| 65 | 65 | Spanner D.E. 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22 - 1 set each | item65 | 1 | Set |
| 66 | 66 | Spanner adjustable 15 cm - 150mm | item66 | 2 | Nos |
| 67 | 67 | Interchangeable ratchet socket set with a 12 mm driver, sized10-32 mm set of 18 socket & attachments. | item67 | 1 | Set |
| 68 | 68 | Double Ended tubular Box spanner set 6-25 mm set of 8 with Tommy bar. | item68 | 1 | Set |
| 69 | 69 | Glass magnifying 7.5 cm - 75 mm | item69 | 2 | Nos |
| 70 | 70 | Clamp toolmaker 5 cm and 7.5 cm set of 2. | item70 | 2 | Nos |
| 71 | 71 | Clamp “C” 10 cm - 100 mm | item71 | 2 | Nos |
| 72 | 72 | Clamp “C” 20 cm - 200 mm | item72 | 2 | Nos |
| 73 | 73 | Hand Reamer Set (Tapar pin straigh flute) Nominal Dia 6,8,10,12,16 m | item73 | 1 | Set |
| 74 | 74 | Machine Reamer parallel (Helical flute)12 - 16mm set of 5. | item74 | 1 | Nos |
| 75 | 75 | Scraper flat 15 cm. - 150 mm | item75 | 8 | Nos |
| 76 | 76 | Scraper triangular 15 cm | item76 | 8 | Nos |
| 77 | 77 | Scraper half round 15cm | item77 | 8 | Nos |
| 78 | 78 | Chisel cold 9 mm cross cut 9 mm X 150 mm diamond. | item78 | 8 | Nos |
| 79 | 79 | Chisel cold flat 9 mm X 100 mm | item79 | 8 | Nos |
| 80 | 80 | Chisel cold round noze. 9 mm X 100 mm | item80 | 8 | Nos |
| 81 | 81 | Drill chuck with key 12 mm. | item81 | 1 | Nos |
| 82 | 82 | Pipe wrench 40 cm - 400 mm | item82 | 1 | Nos |
| 83 | 83 | Pipe vice 100mm | item83 | 1 | Nos |
| 84 | 84 | Adjustable pipe tap set BSP with die set cover pipe size 1\" or 3/4\" | item84 | 1 | Set |
| 85 | 85 | Wheel dresser (One for 4 units). Star/Dresser with Holder | item85 | 1 | Nos |
| 86 | 86 | Machine vice - Swivel Base 10 cm -100 mm | item86 | 1 | Nos |
| 87 | 87 | Machine vice 125 mm | item87 | 1 | Nos |
| 88 | 88 | Sleeve drill Morse 0 - 1, 1 - 2, 2 - 3., 3-4, 4-5 | item88 | 1 | Set |
| 89 | 89 | Vice bench 15 cm jaws - 150 mm | item89 | 20 | Nos |
| 90 | 90 | Bench working 240 x 120 x 90 cm. | item90 | 4 | Nos |
| 91 | 91 | Almirah 180 x 90 x 45 cm. | item91 | 2 | Nos |
| 92 | 92 | Lockers with 8 drawers (standard size). | item92 | 2 | Nos |
| 93 | 93 | Metal rack 182 x 182 x 45 cm | item93 | 1 | Nos |
| 94 | 94 | Instructor Table | item94 | 1 | Nos |
| 95 | 95 | Instructor Chair | item95 | 1 | Nos |
| 96 | 96 | Black board with easel. | item96 | 1 | Nos |
| 97 | 97 | Fire extinguisher (For 4 Units) CO2 type, 3kg capacity | item97 | 2 | Nos |
| 98 | 98 | Fire buckets. | item98 | 2 | Nos |
| 99 | 99 | Machine vice 100mm. | item99 | 2 | Nos |
| 100 | 100 | Wing compass 25.4 cm or 30 cm. | item100 | 2 | Nos |
| 101 | 101 | Hand hammer 1 kg. with handle. | item101 | 1 | Nos |
| 102 | 102 | Torque wrench (Standard/Ratchet type) (14 to 68 Nm) | item102 | 1 | Nos |
| 103 | 103 | Power tools for fastening Capacity 10-18 mm | item103 | 1 | Nos |
| 104 | 104 | Different profile gauges (Plat type) - For demonstration Metric Standard | item104 | 4 | Nos |
| 105 | 105 | Knurling tool (Diamond, Straight & Diagonal) | item105 | 1 | each |
| 106 | 106 | Indexable boring bar with inserts - 1\" shank | item106 | 4 | Nos |
| 107 | 107 | Machine maintenance mannual for Lathe,\nPedestal grinder, Drill machine, Power saw\n | item107 | 1 | Nos |
| 108 | 108 | Temperature gauge Range 0 - 150°C | item108 | 1 | each |
| 109 | 109 | Dowel pin ( straight) Dia. -1\" Length -4\" (Mat:\nStainless Steel)\n | item109 | 1 | each |
| 110 | 110 | Standard Tap screws M3, M4, M5, M6, M8, M10, M12,\nM14, M16\n | item110 | 1 | each |
| 111 | 111 | Lapping plate Dia. -6\" | item111 | 2 | each |
| 112 | 112 | Medium carbon Heat treated alloy steel Metric Studs and bolts along with nuts (for display) of standard length (May be manufactured in-house) M6, M8, M10, M12, M14, M16\n(Standard)\n\n | item112 | 2 | each |
| 113 | 113 | Caps screws M6, M8, M10, M12 | item113 | 2 | each |
| 114 | 114 | Drill gauges Letter drill gauge (A to Z) , Number drill gauge (1 to 60) , Metric drill gauge (1.5mm to 12.5mm, 30 holes)\n | item114 | 2 | Nos |
| 115 | 115 | Cast Iron Globe Valve (Flanged type) 150NB, Class# 150 Flange: ANSI125-B16.1\n | item115 | 2 | Nos |
| 116 | 116 | C.I. Sluice / Gate valve (flanged type) 150NB, Class# 150\nFlange:ANSI125-B16.1\n | item116 | 2 | Nos |
| 117 | 117 | Stop cock 25NB (2-way, Threaded end) | item117 | 2 | Nos |
| 118 | 118 | M.S. Pipe 150NB, Sch.40, ERW, IS:1239 | item118 | 1 | As Required |
| 119 | 119 | G.I. Pipe 25mm, Sch.40, ERW | item119 | 1 | As Required |
| 120 | 120 | Slip-on Forged steel Flange 150NB, ANSI-B16.5, Class#150 | item120 | 4 | Nos |
| 121 | 121 | Bolt & Nut with washer (May be\nmanufactured in-house) M20x2.5x90 Long (part thread -\nHex. Head)\n\n | item121 | 16 | Nos |
| 122 | 122 | Pipe threading die with handle Ratchet type Die head of 1/2\" , 3/4\" and 1\"\n | item122 | 2 | Nos |
| 123 | 123 | Jigs & Fixture (sample)-For demonstration\n(May be manufactured in-house)\n | item123 | 1 | Nos |
| 124 | 124 | M. S. Shaft (May be manufactured in-house) Bright M.S. round bar ? 80mm, 600mm long, Stepped ?? 0mm on 300mm one end\n | item124 | 2 | Nos |
| 125 | 125 | Pulleys (for V-belt or Flat belt) to fit on 50mm dia. Shaft with key slot | item125 | 1 | Nos |
| 126 | 126 | Steel keys (May be manufactured in-house) to fit with keyslot of shaft & pulley\n | item126 | 2 | Nos |
| 127 | 127 | Damaged old spur gear to fit 50mm dia. Shaft | item127 | 2 | Nos |
| 128 | 128 | V-belt and Flat belt to fit on pulley | item128 | 1 | each |
| 129 | 129 | Packing gasket PTFE gasket roll small size | item129 | 1 | Nos |
| 130 | 130 | Washer, clutch, keys, jib, cotter & circlip minimum 25mm size, carbon steel material\n | item130 | 2 | each |
| 131 | 131 | Hollow punch Straight Shank Hollow Punch Sets\n5-12mm\n | item131 | 1 | set |
| 132 | 132 | Drill Drift (May be manufactured in-house) 200mm hardened and black finish | item132 | 2 | Nos |
| 133 | 133 | Bearing different types each type of diameter 25mm\n(min.)\n | item133 | 1 | each |
| 134 | 134 | Lifting sling 8mm Nominal Dia. Single leg sling\n | item134 | 2 | Nos |
| 135 | 135 | Bearing extractor Universal gear puller 2 or 3 jaws\nadjustable\n | item135 | 1 | Nos |
| 136 | 136 | Pulley extractor Universal gear puller 2 or 3 jaws\nadjustable\n | item136 | 1 | Nos |
| 137 | 137 | Trammel 30cm. - 300 mm | item137 | 1 | Nos |
| 138 | 138 | Pocker. | item138 | 2 | Nos |
| 139 | 139 | Prick punch | item139 | 2 | Nos |
| 140 | 140 | Mallet. | item140 | 2 | Nos |
| 141 | 141 | Aviation Snips straight cut 30 cm - 300 mm. | item141 | 2 | Nos |
| 142 | 142 | Flat head hammers with handle. | item142 | 2 | Nos |
| 143 | 143 | Planishing hammer. | item143 | 2 | Nos |
| 144 | 144 | Snip bent left cut 25 cm. - 250 mm | item144 | 2 | Nos |
| 145 | 145 | Stake hatchet with leg 300x200x20 mm | item145 | 2 | Nos |
| 146 | 146 | Stake grooving 100x100x300 mm | item146 | 2 | Nos |
| 147 | 147 | Slip Gauge as Johnson metric set. 87 pieces set | item147 | 1 | Set |
| 148 | 148 | Gauge snap Go and Not Go 25 to 50 mm by 5mm. Set of 6 pcs. | item148 | 1 | Set |
| 149 | 149 | Gauge plug single ended 5 to 55 by 5 mm. Set of 11 pcs. | item149 | 1 | Set |
| 150 | 150 | Gauge telescopic upto 8-150 mm. | item150 | 1 | Nos |
| 151 | 151 | Dial test indicator .01 mm on stand | item151 | 1 | Nos |
| 152 | 152 | Sine bar 125 mm. | item152 | 1 | Nos |
| 153 | 153 | Dial vernier caliper 0 – 300 mm LCO 0.05 mm. (Universal type). | item153 | 1 | Nos |
| 154 | 154 | Screw thread micrometer with interchangeable 0-25mm. Pitch anvils for checking metric threads 60 | item154 | 1 | Nos |
| 155 | 155 | Depth micrometer 0-25 mm. Accuracy 0.01 mm with standard set of extension rods upto 200 mm | item155 | 1 | Nos |
| 156 | 156 | Vernier caliper 0-150 mm. L.C. 0.02 mm. | item156 | 1 | Nos |
| 157 | 157 | Digital Micrometer 0 – 25 mm outside. L.C. 0.001 mm. | item157 | 1 | Nos |
| 158 | 158 | Comparators Gauge dial indicator with stand and bracket LC 0.01mm. | item158 | 1 | Nos |
| 159 | 159 | Engineer?s try square (knife-edge) 150 mm blade. | item159 | 1 | Nos |
| 160 | 160 | Surface roughness comparison plates N1-N12 grade | item160 | 1 | Nos |
| 161 | 161 | Digital Vernier caliper 0-200 mm. L.C. 0.001 mm.(Optional) | item161 | 1 | Nos |
| 162 | 162 | Vernier Bevel Protector Range 360deg, LC. : 5min(150mm blade)\n | item162 | 1 | Nos |
| 163 | 163 | Carbide Wear Block 1 mm - 2 mm | item163 | 2 | each |
| 164 | 164 | Lathe tools H.S.S. tipped set. | item164 | 2 | Nos |
| 165 | 165 | Lathe tools bit 6 mm X 75 mm HSS/Carbide | item165 | 2 | Nos |
| 166 | 166 | Lathe tools bit 8 mm x 75 mm. HSS/Carbide | item166 | 4 | Nos |
| 167 | 167 | Lathe tools bit 10 mm x 85mm. HSS/Carbide | item167 | 4 | Nos |
| 168 | 168 | Arm strong type tool bit holder Right.Hand. | item168 | 2 | Nos |
| 169 | 169 | Arm strong type tool bit holder Left.Hand. | item169 | 2 | Nos |
| 170 | 170 | Arm strong type tool bit holder straight. | item170 | 2 | Nos |
| 171 | 171 | Stilson wrenches 6 mm to 25 mm | item171 | 2 | Nos |
| 172 | 172 | Pipe cutter 6 mm to 50 mm wheel type. | item172 | 1 | Nos |
| 173 | 173 | Pipe bender machine spool type up to 25 mm cold bending. with stand manually operated. | item173 | 1 | Nos |
| 174 | 174 | Adjustable pipe chain tonge to take pipes up to 300 mm. | item174 | 1 | Nos |
| 175 | 175 | Adjustable spanner 38 cm long.- 380 mm | item175 | 1 | Nos |
| 176 | 176 | SS and SC centre lathe (all geared) with minimum specification as: Centre height 150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed system, safety guard, taper turning attachment, motorized coolant system, lighting arrangement & standard accessories. | item176 | 2 | Nos |
| 177 | 177 | Drilling machine pillar sensitive 0-20 mm cap with swivel table motorised with chuck & key. (Pls refer Terms & Conditions for detailed Technical Specifications) | item177 | 1 | Nos |
| 178 | 178 | Drilling machine bench - Sensitive 0-12 mm cap motorised with chuck and key. | item178 | 2 | Nos |
| 179 | 179 | D.E. pedestal Grinding machine with 200mm diameter wheels rough and smooth with twist drill grinding attachment. (Ps refer Terms & Conditions for detailed Technical Specifications) | item179 | 1 | Nos |
| 180 | 180 | Transformer welding set continuous welding current, with all accessories and electrode holder 60% Duty Cycle with Standard Accessories - 300 A, OCV 60-100 V | item180 | 1 | Set |
| 181 | 181 | Welder cable to carry 300 amps. With flexible rubber cover | item181 | 20 | Meter |
| 182 | 182 | Lugs for cable | item182 | 12 | Nos |
| 183 | 183 | Earth clamps. | item183 | 2 | Nos |
| 184 | 184 | ARC welding table (all metal top) 1200 mm X 1200 mm X 750 mm with positioner | item184 | 1 | Nos |
| 185 | 185 | Oxy - acetylene gas welding set equipment with hoses, Oxygen & Acetylene cylenders, regulator and other accessories. | item185 | 1 | Set |
| 186 | 186 | Gas welding table with positioner with Fire Bricks\n | item186 | 1 | Nos |
| 187 | 187 | Welding torch tips of different sizes for Oxy - Acetylene gas welding To fit nozzel no 1,2, & 3 | item187 | 1 | set |
| 188 | 188 | Gas lighter. | item188 | 2 | Nos |
| 189 | 189 | Trolley for gas cylinders. | item189 | 1 | Nos |
| 190 | 190 | Chipping hammer. | item190 | 2 | Nos |
| 191 | 191 | Gloves (Leather) | item191 | 2 | PAIR |
| 192 | 192 | Leather apron. | item192 | 2 | Nos |
| 193 | 193 | Spindle key for cylinder valve. | item193 | 2 | Nos |
| 194 | 194 | Welding torches nozzles no 1,2,& 3. | item194 | 1 | Set |
| 195 | 195 | Welding goggles | item195 | 4 | PAIR |
| 196 | 196 | Welding helmet with coloured flame retardent glass | item196 | 2 | Nos |
| 197 | 197 | Tip cleaner | item197 | 5 | Sets. |
| 198 | 198 | Compressor unit : Please Refer Technical Specification for Detail Specifications | item198 | 1 | Nos |
| 199 | 199 | Pneumatic Trainer Kit, each consisting of the following matching components and accessories: Please Refer Technical Specification for Detail Specifications | item199 | 1 | Sets. |
| 200 | 200 | Cut section model for pneumatic components | item200 | 1 | Nos |
| 201 | 201 | Hydraulic Trainer Kit, each consisting of the following matching components and accessories: Please Refer Technical Specification for Detail Specifications | item201 | 1 | Set |
| 202 | 202 | Cut-section models for hydraulic components | item202 | 1 | Set |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender