Supply Of Equipments For Automobil Lab And I.C. Engine, As Per Tender Documents-Rajasthan

TDR : 22883907

Tender Notice
BOQ

Expired

As Per Tender Documents , Rajasthan

Tender Brief : Supply Of Equipments For Automobil Lab And I.C. Engine

Document Fees
₹ 400 /-

EMD
₹ 22000.0 /-

Tender Value
₹ 11 Lakhs /-

Submission Date
03-01-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: SUPPLY OF EQUIPMENTS FOR AUTOMOBIL LAB AND I.C. ENGINE
1	1	Cut Sectional Working clutch system with pressure plates of old CAR/JEEP\nFull Specification as per Annexure ‘H’	item1	1	Nos
2	2	Cut Sectional Working gear box with differential of old Maruti 800\nFull Specification as per Annexure ‘H’	item2	1	Nos
3	3	Cut sectional model of actual gear box system Sliding mesh \nFull Specification as per Annexure ‘H’	item3	1	Nos
4	4	Cut sectional model of actual gear box system Constant Mesh\nFull Specification as per Annexure ‘H’	item4	1	Nos
5	5	Cut sectional model of actual gear box system Synchro Mesh\n Full Specification as per Annexure ‘H’	item5	1	Nos
6	6	Propeller shaft wit universal joint of old LMV\nFull Specification as per Annexure ‘H’	item6	1	Nos
7	7	Working differential system with live axle, back plate and drum of old Jeep / LMV (cut sectional)\nFull Specification as per Annexure ‘H’	item7	1	Nos
8	8	Cut Sectional Working steering system of rack and pinion types of old LMV\nFull Specification as per Annexure ‘H’	item8	1	Nos
9	9	Cut Sectional Working steering system Worm and Worm wheel type\n Full Specification as per Annexure ‘H’	item9	1	Nos
10	10	Working braking system with stub axle, back plate, drum, master cylinder, wheel cylinder of old LMV \nFull Specification as per Annexure ‘H’	item10	1	Nos
11	11	Cut section model of mechanical braking system\nFull Specification as per Annexure ‘H’	item11	1	Nos
12	12	Working ignition system of 4 cylinder engine with switch, coil, distributor and spark plugs mounted on board.\nFull Specification as per Annexure ‘H’	item12	1	Nos
13	13	Cut sectional working system of petrol engine Automotive vehicle driven by electric motor, showing clutch system , gear box, universal joint and propeller shaft, differential, front and rear axle, steering system, fuel supply system, lightning system, braking system and wheel arrangement.\n Full Specification as per Annexure ‘H’	item13	1	Nos
14	14	Double ended spanner set 6mm to30mm \nFull Specification as per Annexure ‘H’	item14	1	Nos
15	15	Ring spanner set 6mm to 30mm\n Full Specification as per Annexure ‘H’	item15	1	Nos
16	16	Box spanner set 6mm to 30mm \n Full Specification as per Annexure ‘H’	item16	2	Nos
17	17	Working model of fuel supply system of diesel engine showing fuel injector pump and fuel injector for 4 cylinder \nFull Specification as per Annexure ‘H’	item17	1	Nos
18	18	Bore gauge for measuring cylinder bore\nFull Specification as per Annexure ‘H’	item18	5	Nos
19	19	Inside vernier caliperFull Specification as per Annexure ‘H’	item19	1	Nos
20	20	Cut section model of front actual suspension system of car\nFull Specification as per Annexure ‘H’	item20	1	Nos
21	21	Cut section model of rear actual suspension system of car\nFull Specification as per Annexure ‘H’	item21	1	Nos
22	22	Cut section model of front actual suspension system of truck\nFull Specification as per Annexure ‘H’	item22	1	Nos
23	23	Cut section model of rear actual suspension system of truck\nFull Specification as per Annexure ‘H’	item23	1	Nos
24	24	Cut section power steering system\nFull Specification as per Annexure ‘H’	item24	1	Nos
25	25	I.C. Engine Illustrative, detailed, cut section, working models driven By suitable electric motor mounted on steel frame -Two stroke Petrol engine (Approx. height 16\")\nFull Specification as per Annexure ‘H’	item25	1	Nos
26	26	Illustrative, detailed, cut section, working models driven By suitable electric motor mounted on steel frame- Four Stroke Diesel engine (Approx. height 16\"\nFull Specification as per Annexure ‘H’	item26	2	Nos
27	27	Illustrative, detailed, cut section, working models driven - By suitable electric motor mounted on steel frame -Four stroke Petrol engine (Approx. height 16\")\nFull Specification as per Annexure ‘H’	item27	2	Nos
28	28	Illustrative detailed, cut section models of actual components (mounted on steel base) - Zenith carburetor\nFull Specification as per Annexure ‘H’	item28	2	Nos
29	29	Illustrative detailed, cut section models of actual components (mounted on steel base)- S.U. carburetor\nFull Specification as per Annexure ‘H’	item29	2	Nos
30	30	Illustrative detailed, cut section models of actual components (mounted on steel base)- Solex carburetor\nFull Specification as per Annexure ‘H’	item30	1	Nos
31	31	Multi cylinder four stroke petrol engine Test rig. \nFull Specification as per Annexure ‘H’	item31	1	Nos
32	32	Single cylinder diesel engine Test rig\nFull Specification as per Annexure ‘H’	item32	1	Nos
33	33	Air Compressor Performance Test rig.\nFull Specification as per Annexure ‘H’	item33	1	Nos
34	34	Illustrative detailed cut section Working Model of Fuel Injection pump and Fuel injector of 6 cylinder TATA/ Leyland engine\nFull Specification as per Annexure ‘H’	item34	3	Nos
35	35	TECHOMETER DIGITAL\nFull Specification as per Annexure ‘H’	item35	2	Nos
36	36	Cut section of Actual MPFI System of Four Wheeler\nFull Specification as per Annexure ‘H’	item36	3	Nos
37	37	Actual electrical feed pump\nFull Specification as per Annexure ‘H’	item37	2	Nos
38	38	Actual Mechanical feed pump\nFull Specification as per Annexure ‘H’	item38	1	Nos

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Rajasthan Tenders

Laboratory Equipment and Supplies Tenders

Laboratory Equipments Tenders

Laboratory Equipment Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Supply Of Equipments For Automobil Lab And I.C. Engine, As Per Tender Documents-Rajasthan

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Name of Work: SUPPLY OF EQUIPMENTS FOR AUTOMOBIL LAB AND I.C. ENGINE
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	Cut Sectional Working clutch system with pressure plates of old CAR/JEEP\nFull Specification as per Annexure ‘H’	item1	1	Nos
2	2	Cut Sectional Working gear box with differential of old Maruti 800\nFull Specification as per Annexure ‘H’	item2	1	Nos
3	3	Cut sectional model of actual gear box system Sliding mesh \nFull Specification as per Annexure ‘H’	item3	1	Nos
4	4	Cut sectional model of actual gear box system Constant Mesh\nFull Specification as per Annexure ‘H’	item4	1	Nos
5	5	Cut sectional model of actual gear box system Synchro Mesh\n Full Specification as per Annexure ‘H’	item5	1	Nos
6	6	Propeller shaft wit universal joint of old LMV\nFull Specification as per Annexure ‘H’	item6	1	Nos
7	7	Working differential system with live axle, back plate and drum of old Jeep / LMV (cut sectional)\nFull Specification as per Annexure ‘H’	item7	1	Nos
8	8	Cut Sectional Working steering system of rack and pinion types of old LMV\nFull Specification as per Annexure ‘H’	item8	1	Nos
9	9	Cut Sectional Working steering system Worm and Worm wheel type\n Full Specification as per Annexure ‘H’	item9	1	Nos
10	10	Working braking system with stub axle, back plate, drum, master cylinder, wheel cylinder of old LMV \nFull Specification as per Annexure ‘H’	item10	1	Nos
11	11	Cut section model of mechanical braking system\nFull Specification as per Annexure ‘H’	item11	1	Nos
12	12	Working ignition system of 4 cylinder engine with switch, coil, distributor and spark plugs mounted on board.\nFull Specification as per Annexure ‘H’	item12	1	Nos
13	13	Cut sectional working system of petrol engine Automotive vehicle driven by electric motor, showing clutch system , gear box, universal joint and propeller shaft, differential, front and rear axle, steering system, fuel supply system, lightning system, braking system and wheel arrangement.\n Full Specification as per Annexure ‘H’	item13	1	Nos
14	14	Double ended spanner set 6mm to30mm \nFull Specification as per Annexure ‘H’	item14	1	Nos
15	15	Ring spanner set 6mm to 30mm\n Full Specification as per Annexure ‘H’	item15	1	Nos
16	16	Box spanner set 6mm to 30mm \n Full Specification as per Annexure ‘H’	item16	2	Nos
17	17	Working model of fuel supply system of diesel engine showing fuel injector pump and fuel injector for 4 cylinder \nFull Specification as per Annexure ‘H’	item17	1	Nos
18	18	Bore gauge for measuring cylinder bore\nFull Specification as per Annexure ‘H’	item18	5	Nos
19	19	Inside vernier caliperFull Specification as per Annexure ‘H’	item19	1	Nos
20	20	Cut section model of front actual suspension system of car\nFull Specification as per Annexure ‘H’	item20	1	Nos
21	21	Cut section model of rear actual suspension system of car\nFull Specification as per Annexure ‘H’	item21	1	Nos
22	22	Cut section model of front actual suspension system of truck\nFull Specification as per Annexure ‘H’	item22	1	Nos
23	23	Cut section model of rear actual suspension system of truck\nFull Specification as per Annexure ‘H’	item23	1	Nos
24	24	Cut section power steering system\nFull Specification as per Annexure ‘H’	item24	1	Nos
25	25	I.C. Engine Illustrative, detailed, cut section, working models driven By suitable electric motor mounted on steel frame -Two stroke Petrol engine (Approx. height 16\")\nFull Specification as per Annexure ‘H’	item25	1	Nos
26	26	Illustrative, detailed, cut section, working models driven By suitable electric motor mounted on steel frame- Four Stroke Diesel engine (Approx. height 16\"\nFull Specification as per Annexure ‘H’	item26	2	Nos
27	27	Illustrative, detailed, cut section, working models driven - By suitable electric motor mounted on steel frame -Four stroke Petrol engine (Approx. height 16\")\nFull Specification as per Annexure ‘H’	item27	2	Nos
28	28	Illustrative detailed, cut section models of actual components (mounted on steel base) - Zenith carburetor\nFull Specification as per Annexure ‘H’	item28	2	Nos
29	29	Illustrative detailed, cut section models of actual components (mounted on steel base)- S.U. carburetor\nFull Specification as per Annexure ‘H’	item29	2	Nos
30	30	Illustrative detailed, cut section models of actual components (mounted on steel base)- Solex carburetor\nFull Specification as per Annexure ‘H’	item30	1	Nos
31	31	Multi cylinder four stroke petrol engine Test rig. \nFull Specification as per Annexure ‘H’	item31	1	Nos
32	32	Single cylinder diesel engine Test rig\nFull Specification as per Annexure ‘H’	item32	1	Nos
33	33	Air Compressor Performance Test rig.\nFull Specification as per Annexure ‘H’	item33	1	Nos
34	34	Illustrative detailed cut section Working Model of Fuel Injection pump and Fuel injector of 6 cylinder TATA/ Leyland engine\nFull Specification as per Annexure ‘H’	item34	3	Nos
35	35	TECHOMETER DIGITAL\nFull Specification as per Annexure ‘H’	item35	2	Nos
36	36	Cut section of Actual MPFI System of Four Wheeler\nFull Specification as per Annexure ‘H’	item36	3	Nos
37	37	Actual electrical feed pump\nFull Specification as per Annexure ‘H’	item37	2	Nos
38	38	Actual Mechanical feed pump\nFull Specification as per Annexure ‘H’	item38	1	Nos

Supply Of Equipments For Automobil Lab And I.C. Engine, As Per Tender Documents-Rajasthan

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us