| 1 | 1 | Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item1 | 2092.24 | Per cubic metre |
|---|
| 2 | 2 | Providing and construction of a gabian structure for retaining earth with segments of wire crates of size 7mx3mx0.6m (seven metre into three metre into zero point six metre) each divided into 1.5m (one point five metre) compartments by cross netting, made from 4mm (four millimetre) galvanized steel wire @ 32kg. (thirty two kilograme) per 10sqm. ( ten square metre) having minimum tensile strength of 300 Mpa conforming to IS: 280 and galvanizing coating conforming to IS: 4826 woven into mesh with double twist, mesh size not exceeding 100x100mm (one hundred into one hundred millimetre) filled with boulders with least dimension of 20mm (twenty millimetre), all loose ends to be tied with 4mm (four millimetre) galvanized steel wire, in all leads and lifts and carriage of material by all modes of transportation as per the direction of Engineer- in-chrage. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item2 | 373.54 | Per cubic metre |
|---|
| 3 | 3 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks, chiseling/wedging out of rocks (where blasting is prohibited) as per drawings and technical specification clause 305.1 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item3 | 285.58 | Per cubic metre |
|---|
| 4 | 4 | Providing concrete for plain/reinforced concrete mechanically mixed and vibrated in open foundation retaining walls, breast walls and like substructures etcetra complete as per drawings nominal mix 1:5:10 (One cement : five sand : ten graded crushed stone aggregate) 40mm (Forty millimetre) nominal size including cost of form work and curing complete as per HPPWD specification complete in all respect including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item4 | 316.95 | Per cubic metre |
|---|
| 5 | 5 | Back filling behind abutment , wing walls and return walls complete as per drawings and technical specification Clause 1204.3.8.Granular Material and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item5 | 99.57 | Per cubic metre |
|---|
| 6 | 6 | Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 110mm ( One hundred ten millimetre ) dia PVC pipe Finolex/ Supreme having pressure not less than 4.00 Kg/Cm² ( four kilogramm ) per centimetre square extending through the full width of the structure with slope of 1(V):20(H) ( one vertical : twenty horizontal ) towards drawing face complete as per drawing and technical specification clauses 614,709,1204.3.7 in all leads and lifts and carriage of material by all modes of transportation as per the direction of Engineer- in-chrage. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item6 | 92 | Each |
|---|
| 7 | 7 | Providing and Erecting Type -A \"W\" metal beam crash barrier comprising of 3 mm ( Three millimetre) thick corrugated sheet metal beam rail to be kept 70 cm (Seventy centimetre) above road/ground level and to be fixed on ISMC series channel vertical post, 150 x 75 x 5 mm (One hundred fifty into seventy five into five millimetre) to be spaced 2 m (Two metre) centre to centre to be kept 1.80 mtr.(One point eightymetre) below groung / road level. All steel parts and fitments to be galvanised by hot dip process.All fittings to conform to IS:1367 and IS:1364, as emended upto date metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm (One hundred fifty into seventy five into five millimetre) and 330 mm (Three hundred thirty millimetre) long complete as per clause 810 conforming to MORD ( Ministry of road transport ( Latest revision ) including all fitting required for erecting at road site of materials. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item7 | 115 | Per running metre |
|---|
| 8 | 8 | Scarifying the existing bituminous road surface with scarifying machine upto a depth of 150 mm (one hundred fifty milimetre) and disposal of scarified material as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item8 | 14419.8 | Per square metre |
|---|
| 9 | 9 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN ( eighty into hundred )weight to achieve the desired density including lighting, barricading and maintenance of diversion, etcetra as per Tables 400.11 and 400.12 and Technical Specification Clause 406 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item9 | 1441.98 | Per cubic metre |
|---|
| 10 | 10 | Providing and applying priming coat with bitumen Emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70 to 1.00kg/sqm (Zero point seven zero to one point zero kilogram per square metre ) using mechanical means as per Technical Specification Clause 502 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item10 | 14419.8 | Per square metre |
|---|
| 11 | 11 | Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 Kg to 0.30 Kg per sqm (Zero point two five to zero point three zero kilogram) per square metre on prepared granular surfaces treated with primer and cleaned with hydraulic broom as per technical specification clause 503 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item11 | 14419.8 | Per square metre |
|---|
| 12 | 12 | Providing and laying 50 mm( Fifty Millimetre) thick bituminous macadam using Bitumen VG-30 (thirty) with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item12 | 720.99 | Per cubic metre |
|---|
| 13 | 13 | Providing and laying 25mm (Twenty five millimetre) thick bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder and filler specified material VG-30 at the rate 5.4 (five point four ) per cent of mix prepared with addition of Silane Nonotechology (ZycoTherm) at the rate of 2% ( two percent) by weight of bitumen in bitumen and filler as per job mix formula, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause 507 as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item13 | 360.5 | Per cubic metre |
|---|
| 14 | 14 | Construction of Hill side V-Shape drains in M-10(M-ten) grade cement concrete mechanically mixed 1:3:6 (One cement : three sand : six graded stone aggregate) 20mm (Twenty millimetre) nominal size wtih thickness of 10cm (Ten centimetre) of size 45cmx25cm (Forty five into twenty five centimetre) inclidng cost of earth work in all kind of soil and form work with steel plates as per MORD specification accordance with the requirements of specifications true to lines and grade dimensions and other particulars as per MORD drawings and technical specification Section 800, 900, 1200 and 1600 as per the direction of the Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item14 | 890 | Per running metre |
|---|
| 15 | 15 | Construction of parapets with cement concrete 1:5:10 (One cement : five sand : ten graded stone aggregate) 40mm (Forty millimetre) nominal size and curing complete including the cost of form work and as per drawing and HPPWD, technical specification and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item15 | 245 | Each |
|---|
| 16 | 16 | Providing and fixing retro - reflectorised Traffic Signs 900x900x900mm ( nine hundred into nine hundred into nine hundred milimetre) triangular of retro reflectorised cautionary, mandatory and informatory sign as per IRC 67 made of encapsulated lens type reflective sheeting wise clause 1701.2.3 fixed over aluminum sheeting 1.5mm ( one point five milimetre) thick supported on a mild steel angle iron ( TATA/SAIL) post 75mmx75mmx6mm (Seventy five into Seventy five into Six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450mmx450mmx600mmx600mm (Four hundred fifty into four hundred fifty into six hundred in to Six hundred millimetre) below ground level as per drawings and technical specifications clause 801 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item16 | 2 | Each |
|---|
| 17 | 17 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm (One point six millimetre) thick, top and middle plate duly welded with MS flat iron( TATA/SAIL) 25mm x 5m (Twenty five millimetre into five meters) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mmx5mm (Twenty five into twenty five into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. (Two numbers)75mm x 75mm ( Seventi five millimetre into seventy five millimetre) of 12 (Twelve) SWG sheet tubes posts ( TATA/SAIL) duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600 mm, 600mm (Four hundred fifty into four hundred fifty into six hundred millimetre, Six hundred) below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm (Forty seven millimetre into forty seven millimetre) of 12 (Twelve) SWG steel plate tube. All M.S. will be stove embedded on both sides. Lettering and printing arrows, border etc. will be painted with readymixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 as per approved drawing Clause 1701.2.2 including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item17 | 6 | Each |
|---|
| 18 | 18 | Providing and fixing Ordinary kilometre stone (precast) reinforced cement concrete mechanically mixed and vibrated M-15 (M-fifteen) grade nominal mix 1:2½:5 ( one cement: two & half sand : five graded srushed stone aggregate 20mm ( twenty milimetre) nominal size, kilometre stone/ Local stone of standard design as per IRC :8 Fixing in position including painting and printing etcetra as per drawing and M.O.R.D. technical specification rural roads Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item18 | 5 | Each |
|---|
| 19 | 19 | Providing and fixing 200 (Two hundred) metre stone (precast) reinforced cement concrete mechanically mixed and vibrated M-15(M-fifteen) grade nominal mix 1:2½:5 ( one cement: two & half sand : five graded srushed stone aggregate 20mm ( twenty milimetre) nominal size, kilometre stone/ Local stone of standard design as per IRC :8 Fixing in position including painting and printing etcetra as per drawing and M.O.R.D. technical specification rural roads Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | Item19 | 32 | Each |
|---|
| 20 | 20 | Maintenance cost for 1st Year | Item20 | 4.5 | Per km. |
|---|
| 21 | 21 | Maintenance cost for 2nd year @ 8% on 1st Year | Item21 | 4.5 | Per km. |
|---|
| 22 | 22 | Maintenance cost for 3rd year @ 8% on 2nd Year | Item22 | 4.5 | Per km. |
|---|
| 23 | 23 | Maintenance cost for 4th year @ 8% on 3rd Year | Item23 | 4.5 | Per km. |
|---|
| 24 | 24 | Maintenance cost for 5th year @ 8% on 4th Year | Item24 | 4.5 | Per km. |
|---|
