| 1 | 1 | B&R Items\nSurface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed. | | 95 | SQM |
|---|
| 2 | 2 | Excavation in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed. | | 2 | CUM |
|---|
| 3 | 3 | M&L Plain cement concrete (1:4:8) type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. | | 0.6 | CUM |
|---|
| 4 | 4 | M&L for walling of random rubble uncoursed, well bonded bedded and solidly hearted built in CM 1:6 (below ground level) complete all as specified as directed. | | 2.5 | CUM |
|---|
| 5 | 5 | Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. | | 1 | CUM |
|---|
| 6 | 6 | Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed. | | 13.25 | CUM |
|---|
| 7 | 7 | M&L for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers n exe 15cm thick, watered and rammed to a true surface complete all as specified and directed. | | 11 | CUM |
|---|
| 8 | 8 | M&L 75mm PCC type D2, 1:4:8 ( 40mm graded stone aggr) as in sub base of floor complete all as specified as directed. | | 4.5 | SQM |
|---|
| 9 | 9 | M&L for precast cement concrete block masonry 1:3:6 type C1 (using 20mm graded stone aggr) 10 cm thick set in CM 1:4 complete all as specified and directed. | | 55 | SQM |
|---|
| 10 | 10 | M&L for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels complete all as specified and directed.\n(Note: Steel reinforcement shall be measured & paid separately)\n | | 0.5 | CUM |
|---|
| 11 | 11 | Material and Labour TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. | | 35 | KGS |
|---|
| 12 | 12 | Material and Labour TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. | | 20 | KGS |
|---|
| 13 | 13 | M&L for formwork to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, etc for rough finished flat surfaces of concrete complete all as specified and directed | | 4 | SQM |
|---|
| 14 | 14 | Supply and fix second-class hard wood timber scantlings, wrought timber fixed in any position with nails complete all as specified and directed. | | 0.22 | CUM |
|---|
| 15 | 15 | S&F second class hard wood plain, solid, straight chowkhats and frame, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed | | 0.43 | CUM |
|---|
| 16 | 16 | S&F 30mm th 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divieded into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secuering glass etc size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed. | | 6.5 | SQM |
|---|
| 17 | 17 | S&F Plain framed, panelled shutter 35 mm thick (any number of panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed. | | 10 | SQM |
|---|
| 18 | 18 | Supply & Fixing PVC door frame 50 mm x 47 mm made out of 5 mm thich plain colour PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. | | 6 | RM |
|---|
| 19 | 19 | Material and Labour factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail, lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS frame welded / sealed to stiles & rails with suitable PVC Sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site complete all as specified and directed. | | 2.8 | SQM |
|---|
| 20 | 20 | S&F 100 mm long butt hinges medium grade cold rollled mild steel and fixed complete all as specified and directed. | | 21 | EACH |
|---|
| 21 | 21 | S&F Aluminium anodised barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. | | 12 | EACH |
|---|
| 22 | 22 | S&F 150 mm long aluminium handles cast type anodised complete all as specified and directed. | | 14 | EACH |
|---|
| 23 | 23 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. | | 7 | EACH |
|---|
| 24 | 24 | S&F 75 mm long butt hinges medium grade cold rollled mild steel and fixed complete all as specified and directed. | | 36 | EACH |
|---|
| 25 | 25 | S&F Aluminium anodised barrel tower bolts 125 mm of extruded section and fixed complete all as specified and directed. | | 13 | EACH |
|---|
| 26 | 26 | S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed. | | 13 | EACH |
|---|
| 27 | 27 | M&L 4 mm thick shet glass, ordinary quality and glazing with oil puty or wooden beads/PVC beads in square n exc 0.5 sqm in each pane complete all as specified and directed. | | 6.6 | SQM |
|---|
| 28 | 28 | M&L 25 mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in sub base finishing the surface even and rough to receive the topping layer complete all as specified and directed. | | 84.5 | SQM |
|---|
| 29 | 29 | M&L screed bed or bedding layer of mortar (1:4) 15 mm thick for laying floor finishers complete all as specified and directed. | | 84.5 | SQM |
|---|
| 30 | 30 | M&L non-skid ceremic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | | 14.5 | SQM |
|---|
| 31 | 31 | M&L rendering 10 mm thick on fair faces of brick/concrete work CM 1:4 rough to received tiles rough finished complete all as specified and directed. | | 13 | SQM |
|---|
| 32 | 32 | M&L for Cloured Glazed ceramic tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. | | 19 | SQM |
|---|
| 33 | 33 | M&L for rendering 15 mm thick plaster on fair faces of brick/concrete surfaces in CM (1:6) on wall surface, finished even and smooth without using extra cement complete all as specified and directed. | | 80 | SQM |
|---|
| 34 | 34 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. | | 88 | SQM |
|---|
| 35 | 35 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. | | 5 | SQM |
|---|
| 36 | 36 | M&L for three coats of white washing on new plaster wall surface over primer including preparation of plastered surfaces complete all as specified and directed. | | 30 | SQM |
|---|
| 37 | 37 | M&L for for preparation of new wooden/ply wood surfaces of any description exc 10cm width or girth and applying two coat of synthetic over a coat of pink primer complete all as specified and directed. | | 103 | SQM |
|---|
| 38 | 38 | M&L for 75mm thick PCC 1:3:6 type C2 40mm graded aggregate as in plinth protection, finishing the surfaces even and smooth without using extra cement complete all as specified and directed. | | 30 | SQM |
|---|
| 39 | 39 | S&F vitreous china squatting pan Orissa patern, size 580 x 440 mm white with integeral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding complete all as specified and directed. | | 2 | EACH |
|---|
| 40 | 40 | S&F PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. | | 2 | EACH |
|---|
| 41 | 41 | Supply only PVC flush pipe 32mm dia polyethylene of low or high density for low lewel flushing cistern complete all as specified and directed. | | 2 | EACH |
|---|
| 42 | 42 | M&L viterous china WHB, white flat back size 580x450mm exc taps, waste, chain and plug and porcelein stopper but including cutting for aned pinning in ends of brackets or erecting stand complete all as specified and directed. | | 1 | EACH |
|---|
| 43 | 43 | M&L waste cuplings 32mm dia (half or full threads). (minimum weght 32 mm-45grms/40mm- 60grms) complete all as specified and directed. | | 1 | EACH |
|---|
| 44 | 44 | S&F pillar taps 15mm bore dia, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Coldwith long shanks and fly nuts,screwed for iron pipe and fixed complete all as specified and directed. | | 1 | EACH |
|---|
| 45 | 45 | S&F stop cock fancy type 15mm dia CP high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. | | 3 | EACH |
|---|
| 46 | 46 | S&F Bib tap, fancy type, chromium plated, ISI marked, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore and fixed, (weight of one bib tap shall not less than 400 gm each) complete all as specified and directed. | | 2 | EACH |
|---|
| 47 | 47 | M&L 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm th AC building bolt or commercial plywood and fixed to wodden plugs with chromium plated brass screw and cup washers complete all as specified and directed. | | 1 | EACH |
|---|
| 48 | 48 | S&F tower rail 600mm long of PTMT fixed with and including chromium plated brass screws and wodden/plastic cleats (minimum weght 190grms) complete all as specified and directed. | | 2 | EACH |
|---|
| 49 | 49 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. | | 5 | EACH |
|---|
| 50 | 50 | S&F CP grating round 140 mm size of PTMT (min weight 50 gms) complete all as specified and directed. | | 1 | EACH |
|---|
| 51 | 51 | S&F 16mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or laid in floor complete all as specified and directed. | | 10 | RM |
|---|
| 52 | 52 | S&F 20mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or laid in floor complete all as specified and directed. | | 5 | RM |
|---|
| 53 | 53 | S&F 32mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or laid in floor complete all as specified and directed. | | 10 | RM |
|---|
| 54 | 54 | S&F rotatiional moulded polyetylene water storage tanks 500 ltr capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm brass float valve & necessary fittings complete all as specified and directed. | | 1 | EACH |
|---|
| 55 | 55 | S&F PVC ( SWR) pipe 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed. | | 9 | RM |
|---|
| 56 | 56 | S&F PVC ( SWR) pipe 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed. | | 7 | RM |
|---|
| 57 | 57 | M&L PVC (SWR) floor trap with grating including jointing withsolvent cement of 75mm dia complete all as specified and directed. | | 2 | EACH |
|---|
| 58 | 58 | Supply and fix 110mm bore (SWR) bends any radius with acess doore, complete all as specified and directed | | 2 | EACH |
|---|
| 59 | 59 | Supply and fix 110mm bore (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. | | 1 | EACH |
|---|
| 60 | 60 | Material and Labour plain Cement Concrete (1:3:6) type C-1, using 20mm graded stone aggregate as in surface channel and drain complete all as specified and as directed. | | 1 | CUM |
|---|
| 61 | 61 | M&L for 100mm thick PCC Type B-1, 1:2:4 (20mm graded aggregate) as in footpath, hardstanding, finished the surface even & smooth without using extra cement including necessary form work complete all as specified and directed. | | 80 | SQM |
|---|
| 62 | 62 | Material and Labour forming contraction (Dummy) joints 65 mm deepx10 mm wide filled with sealing compound of grade'A' complete all as specified and directed. | | 2 | 10 RM |
|---|
| 63 | 63 | Dismantling plain or corrugated steel sheeting any thickness, any gauge, thickness, including nainital or similar roof covering complete all as specified and directed. | | 85 | SQM |
|---|
| 64 | 64 | Taking down chowkets or frame with shutter (without taking off shutters from the frame) n.exe 1.5 sqm each complete all as specified and directed. | | 5 | EACH |
|---|
| 65 | 65 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. | | 5 | EACH |
|---|
| 66 | 66 | Dismantaling timber scantling 40 Sq cm as in unframed work and over in sec in any position complete all as specified and directed. | | 0.15 | CUM |
|---|
| 67 | 67 | Dismantling of wall and celling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets. in any thickness incl cover fillets complete all as specified and directed. | | 125 | SQM |
|---|
| 68 | 68 | Dismantling boarding any description/ thickness fixed in any position with nails complete all as specified and directed. | | 10 | SQM |
|---|
| 69 | 69 | M&L Second class hard wood clean sawan boarding, 50 mm thick, with butt joints ln any situation fixed with nails complete all as specified and directed. | | 10 | SQM |
|---|
| 70 | 70 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber framework in wall complete all as specified and directed. | | 70 | SQM |
|---|
| 71 | 71 | M&L galvanized iron snap grid with powder coated section of size 24mmx38mmx0.7mm thick ‘T’ section and 25mmx25mmx0.35mm thick wall cleat of angle section and 4mm dia galvanized iron wire suspended with 4mm thick non AC board of Make : M/s EVEREST Industries Ltd of size 600mmx600mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions including two coats of distemper oil emulsion over a coat of cement primer complete all as specified and as directed. | | 50 | SQM |
|---|
| 72 | 72 | M&L for second class hard wood plain fillets, square, rectangular or triangular in section, wrought secured with nails of sectional area exc 3 Sqcm and n.exc 6 Sqcm complete all as specified and directed. | | 160 | SQM |
|---|
| 73 | 73 | Demolition of concrete in ground floor and pavings nexc 15cm thickness including floor finishes like tiles if any of any description. (below or above ground level) complete all as specified and directed. | | 3 | CUM |
|---|
| 74 | 74 | M&L vitrified tiles light shade10mm thick (square /retangular) area of each tiles exc 0.36 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or cloured cement to match complete all as specified and directed. | | 70 | SQM |
|---|
| 75 | 75 | M&L vitrified tiles light shade10mm thick (square /retangular) area of each tiles exc 0.36 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or cloured cement to match on vertical surface complete all as specified and directed. | | 1 | SQM |
|---|
| 76 | 76 | Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.\n | | 10 | SQM |
|---|
| 77 | 77 | M & L preparation of new surface & applying two coats of cement based paints on wall complete all as specified and directed. | | 15 | SQM |
|---|
| 78 | 78 | Material and labour roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces,cleats etc complete all as specified and directed. | | 90 | KGS |
|---|
| 79 | 79 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. | | 0.4 | CUM |
|---|
| 80 | 80 | Demolition of precast concrete block/stone boulder walling built in C.M. complete all as specified and directed. | | 3 | CUM |
|---|
| 81 | 81 | M&L for preparation of old painted surfaces and apply one coat of synthetic ennamel paint of steel surfaces of any description over 10 cm width or girth, not otherwise described complete all as specified and directed. | | 70 | SQM |
|---|
| 82 | 82 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | | 15 | SQM |
|---|
| 83 | 83 | M&L for applying two coats of distemper on new plastered wall surfaces of any description over a coat of alkali registance primer including preparation of plastered surfaces complete all as specified and directed. | | 35 | SQM |
|---|
| 84 | 84 | E&M Items\nTaking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder,ceiling roses, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors etc complete all as specified and directed. | | 35 | PER \nPOINT |
|---|
| 85 | 85 | Taking down carefully by unscrewing from board/outlet boxes, fittings and fixture such as main switches & DBs of any size and any capacity complete all as specified and directed | | 2 | EACH |
|---|
| 86 | 86 | M/L for point wiring with 2 single core FRLS PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with teak wood boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complet with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity complete all as specified and directed. | | 17 | PER \nPOINT |
|---|
| 87 | 87 | All as per item No 91 here-in-before but for one 5 Amp socket outlet independent board complete all as specified and directed | | 6 | PER \nPOINT |
|---|
| 88 | 88 | All as per item No 91 here-in-before but for one 5 Amp socket outlet on the same board complete all as specified and directed | | 6 | PER \nPOINT |
|---|
| 89 | 89 | All as per item Ser No 91 above but for one 15 Amp socket outlet independent with 2 run of cable of size 4 sq mm and one run of 2.5 sq mm cable as earth continuity all as specified and directed | | 6 | PER \nPOINT |
|---|
| 90 | 90 | Supply and fixing switch piano flush type single pole one way 5 Amp 240 volts all as specified and directed \n | | 17 | EACH |
|---|
| 91 | 91 | Supply and fixing for switch socket combination 2 in 1 , 5 pin 5 Amps flush type 240 volts all as specified and directed | | 12 | EACH |
|---|
| 92 | 92 | Supply and fixing for switch socket combination multipurpose 15 A flush type, 5 in 1 240 volts all as specified and directed | | 6 | EACH |
|---|
| 93 | 93 | S&F for ceiliing rose three terminal surface type bakelite 65x50 mm all as specified and directed. | | 17 | EACH |
|---|
| 94 | 94 | S&F security LED light fittings, 1x40W LED luminiaries Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ, 40mm light grade GI pipe with suitable clamps, nuts, bolts and all fitting accessories complete all as specified and directed.\nMake Havells Cat part No. ENDURAPEARLNEOSL40WLED757PASYTOPC & equivalent make specified. | | 2 | EACH |
|---|
| 95 | 95 | Supply & fixing Surface and wall mounted LED batten 20 watt extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with LED Lamp complete all as specified and directed. \nMake Havells ENDURALINEARNEOBS20WLED840SPCWH & equivalent make specified. | | 10 | EACH |
|---|
| 96 | 96 | S&F security LED light battern holder, 1x10W LED luminiaries Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ, and all fitting accessories complete all as specified and directed.Make Havells Cat part No.LED Adore Lamp 10W B22 WW & equivalent make specified. | | 3 | EACH |
|---|
| 97 | 97 | Supply and fix sheet metal enclosures for DBs (Double door type) when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. \n | | 1 | EACH |
|---|
| 98 | 98 | Supply and fixing only MCB SP, 240V,6 to 32 Amps,10 KA complete all as specified and directed. | | 10 | EACH |
|---|
| 99 | 99 | Supply and fixing MCB SPN 240V 40 Amps,10 KA complete all as specified and directed. | | 1 | EACH |
|---|
| 100 | 100 | M&L in replacement of circuit/submain wiring alongwith earth wire with the size of 2x4 Sqmm + 1x2.5 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed as required in and including PVC casing caping complete fixing on wall, roof and floor complete all as specified and directed. | | 25 | RM |
|---|
| 101 | 101 | Materials and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as shown on electrical plate No 5 of SSR Part –I (2009) complete all as specified and directed. | | 1 | EACH |
|---|
