Agriculture Government Departments Closing in 0 days TDR #22852257

Up-Gradation & Strengthening Of Existing Wholesale Market Yard At Paonta Sahib, Distt. Sirmaur, Hp. Sh: - Site Development Work,Provision Of Retaining Wall, Fencing, Gate Post, C/O Toilet Block, Repair/Maintenance, Addition & Alteration Work In Administra

Issued by Government Departments · Paonta Sahib, Himachal Pradesh
Tender Value
2.63 Crore
Estimated cost
Bid Submission
26 Dec 2019
0 days left
EMD
5 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Paonta Sahib → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Up-Gradation & Strengthening Of Existing Wholesale Market Yard At Paonta Sahib, Distt. Sirmaur, Hp. Sh: - Site Development Work, Provision Of Retaining Wall, Fencing, Gate Post, C / O Toilet Block, Repair / Maintenance, Addition & Alteration Work In Administrative Office Building , Civil Works For Esmp Component, Ws & Si And Electrical Installation Work Thereof. Estimated Cost:Rupees 2, 63, 50, 265 / - Earnest Money: Rupees 5, 00, 000 / - Cost Of Form: Rupees 5900 / - Time Limit: Twenty One Months Class- A

BOQ

Name of Work: Up-Gradation & strengthening of Existing Wholesale Market Yard at Paonta Sahib, Distt. Sirmaur, HP. SH: - Site development work,provision of retaining wall, fencing, gate post, C/O Toilet block, Repair/maintenance, addition & alteration work in administrative office building ,civil works for ESMP Component,WS & SI and Electrical Installation work thereof. Estimated Cost:Rupees 2,63,50,265/- Earnest money: Rupees 5,00,000/- Cost of form: Rupees 5900/- Time limit: Twenty one Months Class- A
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11New Work:-\na) Site Development :-\nConstruction of Embackment with approved material deposited at site from the cutting and excavation from drain and foundation of other structure graded compacted to meet requirement of table 300.1 and 300.2 as per tech. specification clause 301.5 as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all iincidential charges.5778.3Cum
22Providing and laying cement concrete 1:4:8 (one cement:four sand: eight graded stone aggregate 40mm(forty milimete) nominal size) and curing complete excluding cost of form work in foundation and plinth as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all iincidential charges.559.97Cum
33Boulder filling under floor including ramming watering consolidation etc. with land burmost complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government743.19Cum
44Providing and laying heavy duty pre cast cement concrete inter locking paver block vibro compacting upto M-50 grade including based on kurb block grey/coloured over sub-base of concrete with 25mm(twenty five milimeter)thick base of cement mortar 1:4(one cement: four sand):- 80mm(eighty milimeter) thick as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.4954.58Sqm
55Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 (M-Fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm ( twenty five millimeters ) thick average thickness of cement mortar 1:4 (one cement :four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (Sub base concrete floor to be paid for separately) 40mm (forty millimeters ) thick inter locking blocks as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.645.11Sqm
66Painting lines,dashes, arrows,letters etc. on roads, air fields and like in two coats with road marking paint , brushing including cleaning the surface of all dirt, dust and other foreign matter as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.184.23Sqm
77b) Retaining Walls:-\nExcavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and iincidentials necessary to complete the work by mechanized means and labour (if any required) . All usefull materials, such as stones, shingles, aggregate and slates shall be sorted to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidential charges.82.56Cum
88Providing and laying plain concrete 1:3:6 (One cement isto three sand isto six graded crushed hard stone agreegate ) mechanically mixed, vibrated and curing complete includig form work in open foundation as per drawing and technical specification clause 802, 803, 1202 and 1203(Eight hundred two, eight hundred three, one thousand two hundred two and ond thousand two hundred three) including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.203.88Cum
99Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8:- Granular material as per H.P.PWD. spesification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipment and material to various location of site through all modes of transportation in all leads and lifts , including all incidental charges.78Cum
1010Providing weep holes in brick masonary/stone masonary/ plain reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full width of the structure with slope of 1(V) :120(H) towards technical specification clause 614, 709, 1204.3.7 as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.46.8Rmt
1111c) Fencing :-\nExcavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD.specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and iincidentials necessary to complete the work by mechanized means and labour (if any required) . All usefull materials, such as stones, shingles, aggregate and slates shall be sorted to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all iincidential charges.25.33Cum
1212Providing and laying plain concrete 1:3:6 (One cement isto three sand isto six graded crushed hard stone agreegate ) mechanically mixed, vibrated and curing complete includig form work in open foundation as per drawing and technical specification clause 802, 803, 1202 and 1203(Eight hundred two, eight hundred three, one thousand two hundred two and ond thousand two hundred three) including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.25.33Cum
1313Structure Steel work in Single section, including cutting, hoisting, fixing in Position and applying a priming coat of approved steel primer all complete. [ISA 50x50x6mm] including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.57.99Qtl
1414Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but not endpost and corner post shall be strutted on both sodes and end post on one side only and provide with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38kg per 100m (minimum), between the two posts fitted and fixed with GI staples complete. (cost of post, struts, earth work and concrete work to be paid separately). payment to be made per meter cost of total length of barbed wire used including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.\na)With GI Barbed wire2070per 100 Rmt
1515Providing and fixing GI chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 4 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.1380Sqm
1616Painting two coats (excluding priming coat)on new steel and other metal surface under coat with enamel paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter:- With enamel paint white / other than white as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.158.46Sqm
1717d) Gate Posts:-\nExcavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD.specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and iincidentials necessary to complete the work by mechanized means and labour (if any required) . All usefull materials, such as stones, shingles, aggregate and slates shall be sorted to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all iincidential charges.\n1.69Cum
1818Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plain in any heights / thickness/depths etcetera upto all foor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government24.96Sqm
1919Providing and laying plain concrete 1:3:6 (One cement isto three sand isto six graded crushed hard stone agreegate ) mechanically mixed, vibrated and curing complete includig form work in open foundation as per drawing and technical specification clause 802, 803, 1202 and 1203(Eight hundred two, eight hundred three, one thousand two hundred two and ond thousand two hundred three) including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.0.34Cum
2020P/L reinforced cement concrete 1:1½:3( one cement : one and half sand : three graded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. in Columns, pillars posts and struts upto floor two level.3.74Cum
2121Providing and laying tor steel reinforcement for reinforced cement concrete work including bending, binding, cutting ,straighting and placing in position including cost of binding wire complete upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government337Kg
2222Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) of Asian paints/Nerolac paints or its equarlied brand and manufacture of approved shade on undecorated concrete / stone / plastered wall surfaces with two coats to give an even shade and final finish after thoroughly cleaning / brushing the surfaces free from all dirt , dust mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.20.89Sqm
2323e) Toilet Block 2&3:\nExcavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD.specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and iincidentials necessary to complete the work by mechanized means and labour (if any required) . All usefull materials, such as stones, shingles, aggregate and slates shall be sorted to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all iincidential charges.68Cum
2424Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government55.2sqm
2525Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetra . upto any thickness upto all floor level as per HP.PWD. specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals.. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government144.62Sqm
2626Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides of soffits of beams, beams haunchings, girders, cantilevers, bressumers and lintels upto any depth /heights upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government133.8Sqm
2727Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plain in any heights / thickness/depths etcetera upto all foor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government51.84Sqm
2828Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:Edges of slabs and breaks in floors and walls: Under 20 cm. wide as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government77.7Rmt
2929Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in Foundation and plinth:as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government16.23Cum
3030P/L reinforced cement concrete 1:1½:3( one cement : one and half sand : three graded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. in Foundations,footings bases of columns and the like and mass concrete.21.52Cum
3131P/L reinforced cement concrete 1:1½:3( one cement : one and half sand : three graded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. in Columns, pillars posts and struts upto floor two level.3.888Cum
3232P/L reinforced cement concrete 1:1½:3( one cement : one and half sand : three graded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. in Suspended Floor roofs, landing and shelves and their support balconies,beams, girders,bressumers and contilever upto floor two level31.08Cum
3333Providing and laying tor steel reinforcement for reinforced cement concrete work including bending, binding, cutting ,straighting and placing in position including cost of binding wire complete upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government6629.12Kg
3434Brick work using Second class common burnt clay building bricks in foundation & plinthg in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government15.18Cum
3535Brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government15.18Cum
3636Half brick work using Second class common burnt clay building bricks above plinth level in all floors up to all heights and levels in cement mortar 1:4 (One cement isto Four sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government177.03Sqm
3737Boulder filling under floor including ramming watering consolidation etc. with land burmost complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government18.74Cum
3838Providing and fixing anodized aluminum sliding door bolts with nuts and screws etcetra as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government 250x16mm.(Two hundred fifty into sixteen milimetres )39Each
3939Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetra . complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Governmentl. 200 x 10mm (two hundred into ten millimeter).78Each
4040Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetra . complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Governmentl. 150 x 10mm (one hundred fifty into ten millimeter).52Each
4141Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 125mm ( one hundred twenty five millimeters )74Each
4242Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government 100mm ( one hundred millimeters )42Each
4343Providing and fixing 12mm thick prelaminated prticle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade I type II, in panelling fixed in aluminium door, windows, shutterd and partation frame with CP brass/ stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in charge including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) Pre- laminated particle board with decorative lamination on both sides62.48Sqm
4444Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) For door ,window and ventilators and glazed partitions860.68Kg
4545b) For shutters of doors windows and ventilators including providing and fixing hinges/pivots and making Provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/ panelling shall be paid for separately) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government852.98Kg
4646Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 4 mm(four milimeter) thick-ness (weight not less than 13.10 kg/ sqm.(thirteen point ten kilgramme per squaremeter as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government21.68Sqm
4747Providing and laying Duro stone vetrified tiles (300x 300mmx10mm (three hundred into three hundred into ten milimeter) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm(twelve milimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government125.3Sqm
4848Providing and laying white glazed tiles of size 30x45cm(thirty into forty five centimeter) and 6mm (six milimeter) thick in skirting riser of steps and dado on 12mm(twelve milimeter) thick cement mortar 1:3(one cement:three sand) and jointed with cement slurry complete in all floors and heights as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges .The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government490.88Sqm
4949Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 150 mm dia pipe25.2Rmt
5050Providing and fixing on wall faces PVC (D-Plast) accessories for rain water\npipes including filling the joints with approved adhesive complete: PVC Plain bend as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 150 mm dia pipe16Each
5151Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC shoe 150mm dia as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. (a) PVC shoe 150mm dia \n8Each
5252Providing and fixing 150mm (One Hundred fifty millimeters) dia meter P.V.C (polyvenyle chloride ) holder bats clamps of approved design to P .V.C. (polyvenyle chloride ) pipes embedded in and including cement concrete block 100 mm x 100 mm x 100mm ( one hundred millimeters into one hundred millimeters into one hundred millimeters ) of 1:2:4 ( one cement : two sand: four graded stone aggregate 20mm ( twenty millimeters ) nominal size ) mix including cost of cutting holes and making good the wall etcetera complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government32Each
53536 mm. (six milimeter) thick cement plaster in cement mortar 1:3(one cement : three sand) in ceiling an soffits of stairs as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges170Sqm
545415 (Fifteen) millimeters thick cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government169.37Sqm
555515 (Fifteen) millimeters thick cement plaster in single coat on the fair side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges117.69Sqm
5656Applying Acreylic wall putty putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.287.95Sqm
5757Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated ceiling/sloping surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.170Sqm
5858Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.169.37Sqm
5959Distempering (two or more coats)with oil bound washable distemper of Asian /Nerolac approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including priming coat of distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth priming coat with distemper primer upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government117.69Sqm
6060Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) of Asian paints/Nerolac paints or its equarlied brand and manufacture of approved shade on undecorated concrete / stone / plastered wall surfaces with two coats to give an even shade and final finish after thoroughly cleaning / brushing the surfaces free from all dirt , dust mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.169.37Sqm
6161C/O Repair and Maintenance, Addition and Alteration Work :-\na) Painting/ distempering work in Resthoiuse, grain shed & ripening chamber\nPainting one coat (excluding priming coat) on previously painted steel and othermetal surfaces with enamel paint white or other than white including brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter etc.complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government1543.48sqm
6262Extra for every subsequent coat of painting on previously painted steel and othermetal surfaces with enamel paint white or other than white including brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter etc.complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government100.45sqm
6363Paint one coat (excluding priming coat) on previously Painted wood and wood based surfaces with enamel paint to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. \na) With enamel paint white/ other than white95.24sqm
6464Extra for every subsequent coat of painting on previously Painted wood and wood based surfaces with enamel paint to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. \na) With enamel paint white/ other than white47.62sqm
6565Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufacture and making the surface even with Paint remover of approved brand and manufacture s per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government19.05sqm
6666Distempering(one coat) with oil bound washable distemper of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.1286.88sqm
6767Extra for every subsequent coat of Distempering with oil bound washable distemper of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.643.44sqm
6868Distempering(one coat) with oil bound washable distemper of approved brand and manufature and of required shade,on decorated ceiling surfaces etc. to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.394.93sqm
6969Extra for every subsequent coat of Distempering with oil bound washable distemper of approved brand and manufature and of required shade,on decorated ceiling surfaces etc. to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.197.48sqm
7070Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) of Asian paints/Nerolac paints or its equarlied brand and manufacture of approved shade on undecorated concrete / stone / plastered wall surfaces with two coats to give an even shade and final finish after thoroughly cleaning / brushing the surfaces free from all dirt , dust mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.2125.16sqm
7171Painting one or more coats on GI Sheet roofing etc.on old work Green shade.s per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges.\nWhite/Grey/Green Shade1333.24sqm
7272b ) Addition & alteration work:-\na) Grain Shed:-\nDemolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead as per the directions of Engineer-In-Charge.\n\n68.705Cum
7373Providing and laying mirror polished Kota stone slab flooring 25 mm (twenty five milimeter) (table rubbed and polished)of size 550x550mm(five hundred fifty into five hundred fifty milimeter) (average) thick base of cement mortor 1:4 (one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete.treling the surface with bee waz as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.1677.5sqm
7474Kota stone (Table ruubed and polished) slab 25mm(twenty five milimeter)thick mirror polished of slab size not less than 550mmx550mm(five hundred fifty into five hundred fifty milimeter) in risers of steps, skierting dado and pillars laid on 12mm(twelve milimeter) (average) thick cement mortar 1:3(one cement:three sand) and jointed with grey cement slurry fixed with pigment to match the shade of the slabs including rubbing and polishing complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges9sqm
7575Providing and fixing 15cm. Wide 90cm. Overall semicircular plain G.I. Sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. Including making necessary conections with rain water pipe complete as per design. 0.63 mm thick sheet. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges134.2Rmt
7676Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 150 mm dia pipe44Rmt
7777Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete: PVC Plain bend as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 150 mm dia pipe16each
7878Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC shoe 150mm dia as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. (a) PVC shoe 150mm dia \n8each
7979Providing and fixing 150mm (One Hundred fifty millimeters) dia meter P.V.C (polyvenyle chloride ) holder bats clamps of approved design to P .V.C. (polyvenyle chloride ) pipes embedded in and including cement concrete block 100 mm x 100 mm x 100mm ( one hundred millimeters into one hundred millimeters into one hundred millimeters ) of 1:2:4 ( one cement : two sand: four graded stone aggregate 20mm ( twenty millimeters ) nominal size ) mix including cost of cutting holes and making good the wall etcetera complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government32each
8080Providing and fixing rubber dock bumper in front of auction yard 1.00 long 150 mmX150 mm X70 mm D Hollow Natural Rubber 72* +/- 5 degree shore \"A\" Black Colour good finishing including all accessories required for above bumper M16*210 mm long stud with nut and washer plated (03 set per bumper) as approved by engineering in charge as per manufactures specification all leafds lifts all incidential charge. The rate including of octroi royalty Malkana, toll tax or other taxes imposed by govt.66Rmt
8181b) Ripening Chamber:-\nProviding and laying mirror polished Kota stone slab flooring 25 mm (twenty five milimeter) (table rubbed and polished)of size 550x550mm(five hundred fifty into five hundred fifty milimeter) (average) thick base of cement mortor 1:4 (one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete.treling the surface with bee waz as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.\n974.7Sqm
8282Kota stone (Table ruubed and polished) slab 25mm(twenty five milimeter)thick mirror polished of slab size not less than 550mmx550mm(five hundred fifty into five hundred fifty milimeter) in risers of steps, skierting dado and pillars laid on 12mm(twelve milimeter) (average) thick cement mortar 1:3(one cement:three sand) and jointed with grey cement slurry fixed with pigment to match the shade of the slabs including rubbing and polishing complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges16.764Sqm
8383Providing and fixing 30cm wide 90cm overall semicircular plain G.I. Sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.63 mm thick sheet as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges125.14Rmt
8484Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 150 mm dia pipe75.2Rmt
8585Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete: PVC Plain bend as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 150 mm dia pipe32Each
8686Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC shoe 150mm dia as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. (a) PVC shoe 150mm dia \n16Each
8787Providing and fixing 150mm (One Hundred fifty millimeters) dia meter P.V.C (polyvenyle chloride ) holder bats clamps of approved design to P .V.C. (polyvenyle chloride ) pipes embedded in and including cement concrete block 100 mm x 100 mm x 100mm ( one hundred millimeters into one hundred millimeters into one hundred millimeters ) of 1:2:4 ( one cement : two sand: four graded stone aggregate 20mm ( twenty millimeters ) nominal size ) mix including cost of cutting holes and making good the wall etcetera complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government64Each
8888c) Administrative Office:-\nProviding and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) For door ,window and ventilators and glazed partitions1341.68kg
8989For shutters of doors windows and ventilators including providing and fixing hinges/pivots and making Provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/ panelling shall be paid for separately) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government1260.71kg
9090Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 5.5 mm (five pint five milimeter) thick-ness (weight not less than 13.10 kg/ sqm.(thirteen point ten kilgramme per squaremeter as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government51.626sqm
9191Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 4 mm(four milimeter) thick-ness (weight not less than 13.10 kg/ sqm.(thirteen point ten kilgramme per squaremeter as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government22.125sqm
9292Providing and fixing stainless steel wire gauge using galvanised MS wire gause of I.S. gauge designation 85(eighty five) G with 0.56mm(zero point fixty six milimeter) wire mesh in aluminium door, window, ventilator shutters and partition etc with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid in basic item.) as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government59.16sqm
9393Providing and fixing 12mm thick prelaminated prticle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade I type II, in panelling fixed in aluminium door, windows, shutterd and partation frame with CP brass/ stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in charge including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) Pre- laminated particle board with decorative lamination on both sides26.57sqm
9494Providing and fixing anodized aluminum sliding door bolts with nuts and screws etcetra as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government 300x16mm.(Three hundred into sixteen milimetres )8each
9595Providing and fixing anodized aluminum sliding door bolts with nuts and screws etcetra as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government 250x16mm.(Two hundred fifty into sixteen milimetres )9each
9696Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetra . complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Governmentl. 250x 10mm (two hundred fifty into ten millimeter).34each
9797Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetra . complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Governmentl. 200x 10mm (two hundred into ten millimeter).216each
9898Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetra . complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Governmentl. 150 x 10mm (one hundred fifty into ten millimeter).236each
9999Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 125mm ( one hundred twenty five millimeters )50each
100100Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government 100mm ( one hundred millimeters )108each
101101Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government 75mm (Seventy five millimeters )118each
102102Providing and fixing aluminium powder coated 100mm (one hundred milimeter) floor door stoppero with rubber cushion screws etc. to suit shutter thickness complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government8each
103103Providing and fixing over head hydraulic door closer of approved brand and manufacture of I.S.I mark for doors as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government8each
104104Providing and fixing oxidized M.S. single acting spring hinges with necessary screws etc. complete. as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Governmentl. 200x 10mm (two hundred into ten millimeter). (a) .150mm8each
105105Providing and fixing 150mm(one hundred fifty milimeter powder coated aluminium hooks and Eyes ofo 6mm(six milimeter) dia with necessary screws etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government156each
106106Providing and fixing MS Grills of required pattern in wooden / alluminium frames of window etc. with MS flats , sqaure or round bars with round headed bolts and nuts or by screws etc. as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.1510.16kg
107107Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 150 mm dia pipe62.24Rmt
108108Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete: PVC Plain bend as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 150 mm dia pipe16Each
109109Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC shoe 150mm dia as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. (a) PVC shoe 150mm dia \n8Each
110110Providing and fixing 150mm (One Hundred fifty millimeters) dia meter P.V.C (polyvenyle chloride ) holder bats clamps of approved design to P .V.C. (polyvenyle chloride ) pipes embedded in and including cement concrete block 100 mm x 100 mm x 100mm ( one hundred millimeters into one hundred millimeters into one hundred millimeters ) of 1:2:4 ( one cement : two sand: four graded stone aggregate 20mm ( twenty millimeters ) nominal size ) mix including cost of cutting holes and making good the wall etcetera complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government32Each
111111Painting one coat (excluding priming coat) on previously painted steel and othermetal surfaces with enamel paint white or other than white including brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter etc.complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government56.6sqm
112112Extra for every subsequent coat of painting on previously painted steel and othermetal surfaces with enamel paint white or other than white including brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter etc.complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government28.3sqm
113113Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter:- With readymixed paint other than white as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.95.58sqm
114114Distempering(one coat) with oil bound washable distemper of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.550.25sqm
115115Extra for every subsequent coat of Distempering with oil bound washable distemper of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.275.13sqm
116116Distempering(one coat) with oil bound washable distemper of approved brand and manufature and of required shade,on decorated ceiling surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.363.05sqm
117117Extra for every subsequent coat of Distempering with oil bound washable distemper of approved brand and manufature and of required shade,on decorated ceiling surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.181.53sqm
118118Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) of Asian paints/Nerolac paints or its equarlied brand and manufacture of approved shade on undecorated concrete / stone / plastered wall surfaces with two coats to give an even shade and final finish after thoroughly cleaning / brushing the surfaces free from all dirt , dust mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.643.23sqm
119119Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead as per the directions of Engineer-In-Charge\na) Not Exceeding 3 sqm in area.32sqm
120120Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead complete as per the directions of Engineer-In-Charge\na) Exceeding 3 sqm in area.14sqm
121121Dismantling steel work upto span of 10 metres and a height of 5 metres in built up sectional in angles, tees, flats and channels including all gusset plates, bolts, nuts, beading etc and stacking the materials within 20 metres lead including dismembering \n1423.09kg
122122d)TOILET - 1 :-\nDemolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead as per the directions of Engineer-In-Charge7.05cum
123123Demolition of RCC works above groud level up to flooe two level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.\na) RCC / RB work6.55cum
124124Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead complete as per the directions of Engineer-In-Charge\na) Exceeding 3 sqm in area.14each
125125Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead complete as per the directions of Engineer-In-Charge.\na) For thickness of tiles up to 25 mm136.31sqm
126126Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetra . upto any thickness upto all floor level as per HP.PWD. specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals.. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government43.68sqm
127127P/L reinforced cement concrete 1:1½:3( one cement : one and half sand : three graded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. in Suspended Floor roofs, landing and shelves and their support balconies,beams, girders,bressumers and contilever upto floor two level5.46cum
128128Providing and laying tor steel reinforcement for reinforced cement concrete work including bending, binding, cutting ,straighting and placing in position including cost of binding wire complete upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government546kg
129129Brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government3.09cum
130130Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) For door ,window and ventilators and glazed partitions125.39Kg
131131b) For shutters of doors windows and ventilators including providing and fixing hinges/pivots and making Provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/ panelling shall be paid for separately) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government125.59kg
132132Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 4 mm(four milimeter) thick-ness (weight not less than 13.10 kg/ sqm.(thirteen point ten kilgramme per squaremeter as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government4.19Sqm
133133Providing and fixing 12mm thick prelaminated prticle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade I type II, in panelling fixed in aluminium door, windows, shutterd and partation frame with CP brass/ stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in charge including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) Pre- laminated particle board with decorative lamination on both sides5.05sqm
134134Providing and fixing anodized aluminum sliding door bolts with nuts and screws etcetra as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government \na) 250x16mm.(Two hundred fifty into sixteen milimetres )5each
135135Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetra . complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Governmentl. 200 x 10mm (two hundred into ten millimeter).10each
136136Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetra . complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Governmentl. 150 x 10mm (one hundred fifty into ten millimeter).10each
137137Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 125mm ( one hundred twenty five millimeters )10each
138138Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 100mm ( one hundred millimeters )5each
139139Providing and fixing 150mm(one hundred fifty milimeter powder coated aluminium hooks and Eyes ofo 6mm(six milimeter) dia with necessary screws etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government6each
140140Providing and laying Duro stone vetrified tiles (300x 300mmx10mm (three hundred into three hundred into ten milimeter) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm(twelve milimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government29.04sqm
141141Providing and laying white glazed tiles of size 30x45cm(thirty into forty five centimeter) and 6mm (six milimeter) thick in skirting riser of steps and dado on 12mm(twelve milimeter) thick cement mortar 1:3(one cement:three sand) and jointed with cement slurry complete in all floors and heights as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government92.65sqm
142142Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated ceiling/sloping surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.13.45sqm
143143Distempering (two or more coats)with oil bound washable distemper of Asian /Nerolac approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including priming coat of distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth priming coat with distemper primer upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government43.68sqm
144144Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) of Asian paints/Nerolac paints or its equarlied brand and manufacture of approved shade on undecorated concrete / stone / plastered wall surfaces with two coats to give an even shade and final finish after thoroughly cleaning / brushing the surfaces free from all dirt , dust mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.62.95sqm
14514515 (Fifteen) millimeters thick cement plaster in single coat on the fair side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government13.45Sqm
14614615 (Fifteen) millimeters thick cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government62.95sqm
1471476 mm. (six milimeter) thick cement plaster in cement mortar 1:3(one cement : three sand) in ceiling an soffits of stairs as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government43.68sqm
148148e) BLOCK No - 1:-\nDismantling steel work upto span of 10 metres and a height of 5 metres in built up sectional in angles, tees, flats and channels including all gusset plates, bolts, nuts, beading etc and stacking the materials within 20 metres lead including dismembering for dismantling trusses,rafters, purlins etc. of steel work for every additinal span of 1 m or part of thereof beyond 10 meters as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges\n\n11562.5kg
14914950 mm thick cement concrete flooring with metallic concrete hardner topping under layer of 35 mm thick cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consisting of mix 1:2 (1 cement hardner mix : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (4 parts of cement: 1 part of metallic floor handening compound of approved quality by weight) including finishing complete as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges575.46sqm
150150Providing and laying white glazed tiles of size 30x45cm(thirty into forty five centimeter) and 6mm (six milimeter) thick in skirting riser of steps and dado on 12mm(twelve milimeter) thick cement mortar 1:3(one cement:three sand) and jointed with cement slurry complete in all floors and heights as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government18.68sqm
151151Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 100 mm dia pipe12rmt
152152Providing and fixing on wall faces PVC (D-Plast) accessories for rain water\npipes including filling the joints with approved adhesive complete: PVC Plain bend as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 100 mm dia pipe8each
153153Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC shoe 150mm dia as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. (a) PVC shoe 150mm dia \n4each
154154Providing and fixing 150mm (One Hundred fifty millimeters) dia meter P.V.C (polyvenyle chloride ) holder bats clamps of approved design to P .V.C. (polyvenyle chloride ) pipes embedded in and including cement concrete block 100 mm x 100 mm x 100mm ( one hundred millimeters into one hundred millimeters into one hundred millimeters ) of 1:2:4 ( one cement : two sand: four graded stone aggregate 20mm ( twenty millimeters ) nominal size ) mix including cost of cutting holes and making good the wall etcetera complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government16each
155155Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government\na) 0.63 mm thick sheet537.6sqm
156156Providing and fixing 15 cm. Wide 45 cm. Overall semicircular plain G.I. Sheet gutter with iron brackets 40x3 mm size bolts and nuts and washers etc. Including making necessary conections with rain water pipe complete as per design.as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges51.2rmt
157157Steel work welded in built up tubolour hollow sections of BIS specification, trusses and framed work, including cutting, hoisting in all heights and levels, fixing in position and applying a priming coat of red lead paint complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges in\na) Trusses and trussed purlins258.17qtl
158158Painting one coat (excluding priming coat) on previously painted steel and othermetal surfaces with enamel paint white or other than white including brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter etc.complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government212.53sqm
159159Distempering(one coat) with oil bound washable distemper of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.841.83sqm
160160Extra for every subsequent coat of Distempering with oil bound washable distemper of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.420.88sqm
161161Distempering (one coats) with oil bond washable distemper of approved brand and manufacture and of required shade on undecorated Ceiling to given an even shade, after thoroughly brushing the clean of all greasw, dirt, loose Pieces of scales and also including preparing the surface even and sand papered smooth.as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges454sqm
162162Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on decorated wall surface (one coat) to give an even shade after throughly brushing the surface to remove all dirt, loose or softened paint. as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges562.34sqm
163163f) BLOCK No - 2:-\nDemolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead as per the directions of Engineer-In-Charge.12.56cum
164164Dismantling of Steel truss3280kg
165165Brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government3.72cum
16616650 mm thick cement concrete flooring with metallic concrete hardner topping under layer of 35 mm thick cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consisting of mix 1:2 (1 cement hardner mix : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (4 parts of cement: 1 part of metallic floor handening compound of approved quality by weight) including finishing complete.209.6sqm
167167Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated ceiling/sloping surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges.32.32sqm
16816815 (Fifteen) millimeters thick cement plaster in single coat on the fair side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government32.32sqm
169169Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 100 mm dia pipe8.405Rmt
170170Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete: PVC Plain bend as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 100 mm dia pipe4each
171171Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC shoe 150mm dia as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. (a) PVC shoe 100mm dia \n2each
172172Providing and fixing PVC Clamps 150 mm (one hundred millimeter) dia clamps of approved design and jointing with anchor bolt 8mm(eight milimeter) dia and embeded in cement concrete block as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.6each
173173Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government\na) 0.63 mm thick sheet188.89sqm
174174Providing and fixing 15cm. Wide 45cm. Overall semicircular plain G.I. Sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. Including making necessary conections with rain water pipe complete as per design. 0.63 mm thick sheet. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges32.4rmt
175175Steel work welded in built up hollow sections of BIS specification, trusses and framed work, including cutting, hoisting in all heights and levels, fixing in position and applying a priming coat of red lead paint complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges\na) Trusses and trussed purlins59.15qtl
176176Painting one coat (excluding primimg cost) on Previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters:- as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges169.31sqm
177177Distempering(one coat) with oil bound washable distemper of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.666.14sqm
178178Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) of Asian paints/Nerolac paints or its equarlied brand and manufacture of approved shade on undecorated concrete / stone / plastered wall surfaces with two coats to give an even shade and final finish after thoroughly cleaning / brushing the surfaces free from all dirt , dust mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surfaces upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the govt.340.05sqm
179179Water Supply & Sanitory Installation\nProviding and fixing to wall ceiling and floors galvanized mild steel tubes (medium grade) tube 15 (Fifteen) millimeters nominal bore, fitting and clamps including making good the wall ceiling and floors ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government20Rmt
180180Providing and fixing to wall ceiling and floors galvanized mild steel tubes (medium grade) tube 20 (Twenty) millimeters nominal bore, fitting and clamps including making good the wall ceiling and floors ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government20Rmt
181181Providing, fixing and laying in trenches galvanized mild steel tube 15 (Fifteen Five) millimeters nominal bore. (Medium grade) tube fitting ISI marked (earth work in trenches to be measured and paid for separately) as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government50Rmt
182182Providing, fixing and laying in trenches galvanized mild steel tube 20 (twenty) millimeters nominal bore. (Medium grade) tube fitting ISI marked (earth work in trenches to be measured and paid for separately) as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government50Rmt
183183Making connection of galvanized steel distribution branch with galvanized mild steel main line 20 to 40 (Twenty to Forty) millimeters nominal bore, cutting and threading the pipes complete, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.2each
184184Providing and fixing water meter and stop cock in GMS tube of 15 (Fifteen) millimeters nominal bore 1including necessary fittings such as mild steel galvanized jam nut sockets etc. cutting and making long screws complete, ISI markedas per HP.PWD specification,including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government2each
185185Providing and fixing plytheline aluminum polythylene (PE-ALPE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 kitee or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall 1216 (one thousand two hundred sixteen ) (16mm O.D. pipe ) (sixteen millimeter outer dia )including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge.189Rmt
186186Providing and fixing plytheline aluminum polythylene (PE-ALPE) composite pressure pipe U.V.stabilized with carbon black confrming to IS- 15450-2004 of kitee or its equivalent water supply including clamp at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fittings (internal work ) pipes exposed on wall internal work Exposed on wall 1620 (one thousand six hundred twenty)(20 mm OD pipe) (twenty millimeter outer dia ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge.60Rmt
187187Providing and fixing plytheline aluminum polythylene (PE-AL-PE) composite internal seal compressing fittings as per IS-154502004 of kitee or its equivalent for hot water supply such as tees elbows reducers connectors couplers and clamps with jointing tersting and fixing including cutting and making good the walls etc. ( This type of fitting to be used for hot water supply only ) Equal tees 1216mm (one thousand two hundred sixteen millimeters ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.50Each.
188188Providing and fixing plytheline aluminium polyethylene (PE-AL-PE) Equal tees 1620 (one thousand six hundred twenty millimeters ) including carriage of materials within all leads, lifts and other incidentals incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.20Each.
189189Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Reducing Tee 1620 (one thousand six hundred twenty millimeters ) all branches including carriage of materials within all leads, lifts and other incidentals incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.20Each.
190190Providing and fixing plytheline aluminum polyethylene (PEAL-PE) Female branch Tee 1216x1216x15mm ( one thousand two hundred sixteen into one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government50Each.
191191Providing and fixing plytheline aluminum polyethylene (PEAL-PE) Female branch Tee 1620x1620x20mm ( one thousand six hundred twenty into one thousand six hundred twenty into twenty millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government20Each.
192192Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Female elbows 1216x15mm ( one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.50Each.
193193Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Female elbows 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.20Each.
194194Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Male thread connector 1216x15mm ( one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.50Each.
195195Providing and fixing plytheline aluminium polyethylene (PE-ALPE) male thread connector 1620x15mm ( one thousand six hundred twenty into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government..25Each.
196196Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Fe-male thread connector 1216x15mm ( one thousand two hundred sixteen into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and type of taxes imposed by the Government and or as directed by the Engineerin-Charge and all type of taxes imposed by the Government..50Each.
197197Providing and fixing plytheline aluminium polyethylene (PEAL-PE) Fe-male thread connector 1620x15mm ( one thousandsix hundred twenty into fifteen millimeter) thread including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and type of taxes imposed by the Government and or as directed by the Engineerin-Charge and all type of taxes imposed by the Government..25Each.
198198Providing and fixing plytheline aluminium polythylene (PE-ALPE) Couplers 1216 ( one thousand two hundred sixteen ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government. .50Each.
199199Providing and fixing plytheline aluminium polyethylene (PE-ALPE) Couplers 1620 ( one thousand six hundred twenty ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.20Each.
200200Providing and fixing plytheline aluminium polythylene (PE-ALPE) Reducers 1620x1216 ( one thousand six hundred twenty into one thousand two hundred sixteen ) including carriage of materials within all leads, lifts and other incidentals and or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.20Each.
201201Providing and fixing various capacity.store well branded ISI marked Polythene water tank with 40 (Forty) millimetre nominal size bore galvanized Mild Steel scour tube with fitting 25 (Twenty Five) millimetre nominal bore galvanized Mild Steel overflow tube with fittings and mosquito proof coupling of approved municipal design 15 (Fifteen) millimetre nominal size ball valve and mosquito proof PVC cover with locking arrangement including providing pads of size as required for inlet and outlet tube complete ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\n5000Per Liter.
202202Providing and fixing high pressure P V C ( poly vinyl chloride) spigot and socket waste ventilating pipes ISI marked including fixing with approved adhesive complete 110mm (one hundred ten millimeters) diameter as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government102Rmt
203203Providing and fixing high pressure P V C ( poly vinyl chloride) spigot and socket waste ventilating pipes ISI marked including fixing with approved adhesive complete 75 mm (seventy five millimeters) diameter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-inCharge and all type of taxes imposed by the Government..180Rmt
204204Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government\na) 110 mm ( one hundred ten millimeter)24Each.
205205Providing and fixing 150mm (One Hundred fifty millimeters) dia meter P.V.C (polyvenyle chloride ) holder bats clamps of approved design to P .V.C. (polyvenyle chloride ) pipes embedded in and including cement concrete block 100 mm x 100 mm x 100mm ( one hundred millimeters into one hundred millimeters into one hundred millimeters ) of 1:2:4 ( one cement : two sand: four graded stone aggregate 20mm ( twenty millimeters ) nominal size ) mix including cost of cutting holes and making good the wall etcetera complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government32Each.
206206Providing and fixing PVC ISI marked floor traps of self-cleaning design including fixing with approved adhesive complete including cost of cutting and making good the walls and the floors:-110 (one hundred) millimetres diameter, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government\na) 110x 90 mm(one hundred ten into ninety milimeter.60Each.
207207Providing and fixing PVC ( poly vinyl chloride) single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three millimeter ) thick bolts and nuts including fixing with approved adhesive etc. complete 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-inCharge and all type of taxes imposed by the Government... \na) 110 (One hundred ten) millimetres nominal size.12Each
208208Providing and fixing PVC ( poly vinyl chloride) single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three millimeter ) thick bolts and nuts including fixing with approved adhesive etc. complete 75mm (seventy five millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-inCharge and all type of taxes imposed by the Government... \na)75 (seventy five) millimetres nominal size.18Each
209209Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 110 (One hundred ten) millimetres nominal size.20Each
210210Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 75 (seventy five) millimetres nominal size.24Each
211211Providing and fixing PVC ( poly vinyl chloride) single equal branch plain ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimeters) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.. \na) 110 (One hundred ten) millimetres nominal size.\n18Each
212212Providing and fixing PVC ( poly vinyl chloride) single equal branch plain ISI marked including fixing with approved adhesive etcetera complete 75mm (seventy five millimeters) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government.. \na) 75 (seventy five) millimetres nominal size.\n22Each
213213Providing and fixing PVC ( poly vinyl chloride) collars ISI marked including fixing with approved adhesive etcetera complete , 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 110 (One hundred ten) millimetres nominal size.30Each
214214Providing and fixing PVC ( poly vinyl chloride) collars ISI marked including fixing with approved adhesive etcetera complete , 75mm (seventy five millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes including fixing with approved adhesive etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\n40Each
215215Providing and fixing PVC ( poly vinyl chloride) plain bend ISI marked including fixing with approved adhesive etcetera complete 110mm (one hundred ten millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes32Each
216216Providing and fixing PVC ( poly vinyl chloride) plain bend ISI marked including fixing with approved adhesive etcetera complete 75mm (seventy five millimeter) dia meter including carriage of materials within all leads, lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes40Each
217217Providing and fixing 110 (One hundred ten ) millimetres PVC P or S trap for water closet (Squatting pan) including jointing the trap with PVC pipe with solution/adhesive, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.16Each
218218Providing and fixing 110mm ( one hundred ten milimeters ) dia meter PVC ( poly vinyl chloride) cowl complete including carriage of materials within all leads and lifts and other incidental as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.3Each
219219Providing and fixing 75mm (seventy five milimeters ) dia meter PVC ( poly vinyl chloride) cowl complete including carriage of materials within all leads and lifts and other incidental as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.3Each
220220Providing and fixing HIND WARE/CERA MAKE orrisa pattern vitreous china water closet squatting pan No. 20042 (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) white shade (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals and as per directions of Engineerin- charge. The rate including Sales tax, Toll tax or any other taxes imposed by the Government .16Each
221221Providing and fixing viterous china wash down water closet (European type W.C pan) PRIMA No. 2090 (Two thousand Ninety) of Cera or its equivalent white shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(One cement isto One sand) (Seat and cover to be measured and paid for separately), Anglo Indian (Universal Closet) ISI marked, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges and as per directions of Engineerin- charge. The rate including Sales tax, Toll tax or any other taxes imposed by the Government .11Each
222222Providing and fixing viterous china wash down water closet (European type W.C pan) of Cera or its equivalent white shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(One cement isto One sand) (Seat and cover to be measured and paid for separately), Ordinary Closet ISI marked, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges and as per directions of Engineerin- charge. The rate including Sales tax, Toll tax or any other taxes imposed by the Government .2Each
223223Providing and fixing PTMT coloured/ white high density polyethylene / polypropylene HIND WARE/CERA MAKE poly Venyl Chloride 10 liters (ten) capacity (full flush )European standard control low level flushing cistern with a pair of CI or MS brackets complete with fittings such as lead valves syphon, 15mm (fifteen millimeter) nominal size PVC ball valve with polythene float, CP brass handles, unions and couplings for connection with inlet, outlet and over flow pipes 40mm (forty millimeters) dia meter including Chromium plated flush bend and cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( over flow pipe to be measured and paid for separately ) complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineerin-Charge and all type of taxes imposed by the Government.29Each
224224Providing and fixing plastic Seat (solid/hollow type) and cover of Cera make or its equivalent for wash down water closet with CP brass hinges and rubber buffers solid type black plastic sheet and cover, as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts and other incidental or as directed by the Engineerin-Charge and all type of taxes imposed by the Government. \n13Each
225225Providing and fixing HIND WARE/CERA MAKE bowl pattern Urinal (vitreous china) of size 430x260mm(four hundred thirty into two hundred sixty milimeter) including fittings complete in all respect including brackets and all accessories as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts and other incidental or as directed by the Engineerin-Charge and all type of taxes imposed by the Government.22Each
226226Providing and fixing automatic flushing cistern of viterous china with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus,mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) :- 5 litres capacity :-as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges or as directed by the Engineerin-Charge and all type of taxes imposed by the Government. \na) Viterous china22Each
227227Providing and fixing C.P. brass flush pipe /spreaders for urinal with fitting such as unions,clamps etc. (all in C.P. Brass) including cutting holes and making good the same :-15mm (fifteen milimeter) nominal bore as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges or as directed by the Engineerin-Charge and all type of taxes imposed by the Government.19.81Rmt
228228Providing and fixing division plate of viterous china for urinal of white shade Hind ware Cera or its equivalent 600*300 (Six hundred into Three hundred) millimeter’s size for urinal, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges or as directed by the Engineerin-Charge and all type of taxes imposed by the Government.18Each
229229Providing and fixing of wash basin No.1008 (One thousand Eight) of size 550*400 (Five hundred Fifty into Four Hundred) millimetres of viterous china without pedestal in white shade of Cera make or its equivalent with single hole for pillar tap with Cast Iron or Mild steel brackets painted white including cutting holes in walls and making good the same including fittings complete in all respect including brackets and all accessories as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.12Each
230230Providing and fixing rubber plug for of 32 mm dia for wash basin including brackets and all accessories ISI marked as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.12Each
231231Providing and fixing of pedestal of viterous china in white shade of Cera make or its equivalent with single hole for pillar tap with including fittings complete in all respect including its all accessories, as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.12Each
232232Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of materials as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts. (a) 32 mm dia12Each
233233Providing and fixing G.I/M.I Union 32 (Thirty Two) millimetres diameter ISI marked , complete in all respect as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.12Each
234234Providing and fixing 32 (Thirty Two) millimeters dia lead waste pipe ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.20.4Rmt
235235Providing and fixing Chromium Plated brass Bottle Trap for wash basin or sink. 32 (Thirty Two) millimetres diameter ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.12Each
236236Providing and fixing 100mm(one hundred milimeter) C.P. grating ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.60Each
237237Providing and fixing 600*450 (Six hundred into Four hundred Fifty) millimeters size beveled edge merrier of superior glass mounted on 6 (Six) millimeters thick asbestos sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.12Each
238238Providing and fixing 600mmx120 mm glass shelf with C .P brass and guard rail complete of approved make, fixed to wooden plugs with C. P brass screw ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.5Each
239239Providing and fixing chromium plated brackts IS No. 8934 Toilet Paper holders with Flap of Cera or its equivalent, as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.5Each
240240Providing and fixing chromium plated iron Towel Rail 600mm (Six hundred) millimeters size of Cera or its equivalent, as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.11Each
241241Providing and fixing chromium plated brass soap dish of Prayag/ Hindware/ Cera with Chromium plated brass brackets fixed to wooden cleats with Chromium plated brass screw complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge10Each
242242Providing and fixing division plate of viterous china for urinal of white shade Hind ware Cera or its equivalent 600*300 (Six hundred into Three hundred) millimeter’s size for urinal, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges or as directed by the Engineerin-Charge and all type of taxes imposed by the Government.18Each
243243Providing and fixing 15mm (fifteen millimeters )diamete chromium plated brass bib tap of Prayag/ Hindware/ Cera with capstan head complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineerin-Charge.45Each
244244Providing and fixing chromium plated IS No. 8934 brass pillar tap with capstan head 15 (Fifteen) millimeters dia ISI marked Cera or its equivalent as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.12Each
245245Providing and fixing chromium plated IS No. 8934 brass angle valve 15 (Fifteen) millimeters of Jaquar or its equivalent, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.74Each
246246Providing and fixing P.V.C. Connection pipe with brass unions 300/450mm ( three hundred / four hundred fifty millimeter ) long and 15mm (fifteen millimeters) nominal bore including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.74Each
247247Providing and fixing 20mm (twenty milimetre)nominal bore brass full way valve with wheel complete ISI marked as per HPPWD specifications including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.10Each
248248Providing and fixing 15mm (fifteen millimeters )diamete chromium plated brass bib tap of Prayag/ Hindware/ Cera complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineerin-Charge.8Each.
249249Providing and fixing PTMT reducer for push cock of approved quality and colour (20mm x15mm ) (twenty milimeters into fifteen milimeters) ISI marked as per HPPWD specifications including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-inCharge and all type of taxes imposed by the Government.8Each.
250250Providing and fixing PTMT angle cock of approved quality and colour fancy 15mm (fifeen milimter) with flange ISI marked as per HPPWD specifications including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge and all type of taxes imposed by the Government5Each.
251251Providing and fixing PTMT jet spray of approved quality and colour with 1.5 mtr(one point five meters) tube. as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.13Each.
252252Providing and fixing grab bars with chromium plated steel pipe 40mm ( forty millimeters) dia at 78 cm ( seventy eight centimeter ) height with mild steel plate 4mm (four millimeters ) thick as per detail and position of seat wash basin with nuts ,bolts and clamps etc. including cutting holes and making good the walls complete in all respect as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.2Each.
253253Providing and laying in trenches PVC finolex waste pipes 150 mm dia including jointing with approved adhesive etc. in all respect as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.\n26.1Rmt
254254Providing and laying CC 1:4:8 (1 cement :4sand:8 graded stone aggregates 40 mm nominal size ) for surrround or encasing PVC waste pipes of 150 mm dia including concrete for bedding , necessary formwork and curing complete etc.ncluding carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.26.1Rmt
255255Constructing man hole with RCC top slab in 1:2:4 mix in (m 1 cement :2 sand :4 graded stone aggregates 20 mm nominal size ) foundation concrete 1:4:8 ( 1 cement :4 sand : 8 graded stone aggregates 40 mm nominal size inside oplastering 15 mm thick with cement mortar 1:3 ( 1 cement : 3 sand) finished withy a floating coat of neat cement and making channel in concrete 1:2:4 mix ( 1 cement : 2 sand :4 graded stone aggregates 20 mm nominal size ) finished smooth complete including curing and testing complete of in side size (800x800x500 m deep including precast RCC cover of NTC make with frame of size 455x610 mm internal diemension with 230 mm thick wall of brick masonary using common burnt clay building bricks in Cement Mortar 1:3 ( 1 cement :3 sand) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.1Each.
256256Constructing main hole with RCC top slab in 1:2:4 mix in (m 1 cement :2 sand :4 graded stone aggregates 20 mm nominal size ) foundation concrete 1:4:8 ( 1 cement :4 sand : 8 graded stone aggregates 40 mm nominal size inside oplastering 15 mm thick with cement mortar 1:3 ( 1 cement : 3 sand) finished withy a floating coat of neat cement and making channel in concrete 1:2:4 mix ( 1 cement : 2 sand :4 graded stone aggregates 20 mm nominal size ) finished smooth complete including curing and testing complete of in side size (800x800x1000 m deep including precast RCC cover of NTC make with frame of size 455x610 mm internal diemension with 230 mm thick wall of brick masonary using common burnt clay building bricks in Cement Mortar 1:3 ( 1 cement :3 sand) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.1Each.
257257ESMP ( CIVIL Works):-\nExcavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD.specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and iincidentials necessary to complete the work by mechanized means and labour (if any required) . All usefull materials, such as stones, shingles, aggregate and slates shall be sorted to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all iincidential charges.115.34cum
258258Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work. blasting work , jumper blasting work,soft and hard blasting and doing work in saturated soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as per HP.PWD. specifications,approved drawings, designs as per the entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals312.4cum
259259Filling in plinth with sand under floor including watering, ramming ,consolidating and dressing complete as per HP.PWD. specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals.172.88cum
260260Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government365.94sqm
261261Providing and laying plain cement concrete 1:4:8 (one cement; four sand : eight graded crushed stone aggregate 40mm(forty millimeters) nominal size mixed and vibrated mechanically and curing complete in or under water including pumping or bailing out water / dewatering removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/ heights as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.59cum
262262P/L reinforced cement concrete 1:1½:3( one cement : one and half sand : three graded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. in Foundations,footings bases of columns and the like and mass concrete.81.25Cum
263263Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20mm nominal size) and curing complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. in Foundations,footings bases of columns and the like and mass concrete.46.77sqm
264264Brick work using Second class common burnt clay building bricks in foundation & plinthg in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government993kg
265265Brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government31.68cum
266266Brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government100.11Cum
267267Providing and fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 30 mm thick2.19cum
268268Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 2nd class kail wood37.8sqm
269269Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 2nd class kail wood30.24sqm
270270Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.192each
271271Providing and fixing anodized aluminum sliding door bolts with nuts and screws etcetra as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government 250x16mm.(Two hundred fifty into sixteen milimetres )18Nos
272272Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 125mm ( one hundred twenty five millimeters )36Nos
273273Providing and fixing anodized aluminum tower bolts, (Barrel type)anodized transparent or dyed to required colour and shade with bolts and nuts/screws etcetra . complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Governmentl. 100 x 10mm (one hundred into ten millimeter).84Nos
274274Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 125mm ( one hundred twenty five millimeters )36Nos
275275Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government 100mm ( one hundred millimeters )42Nos
276276Boulder filling under floor including ramming watering consolidation etc. with land burmost complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government41cum
277277Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 40 mm thick169.82sqm
278278Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government\na) 0.63 mm thick sheet228.19sqm
279279Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 100 mm dia pipe1.5rmt
280280Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.\na) 150 mm dia pipe11.22rmt
281281Steel work welded in built up hollow sections of BIS specification, trusses and framed work, including cutting, hoisting in all heights and levels, fixing in position and applying a priming coat of red lead paint complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges in In beams joists channels ,angles ,tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.17.2qtl
282282Providing and fixing Galvanised structural steel plate 200m wide 6 mm thick , welded prperly with steel posts i/c welding charges and applying a priming coat of red lead paint complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges134kg
283283Letering with paints of apparoved brand and manufature with ready mixed paint ( white or other than white) lettres/ figures of 15 cm height etc. as per the entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax.160per letter per cm height
284284Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt dust and other foreign matter with enamel paint white or other than white as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax,5.68sqm
285285Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.134.88Sqm
286286Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping with enamel paint other then white as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..134.88sqm
28728715 (Fifteen) millimeters thick cement plaster in single coat on the fair side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges635.18sqm
288288White washing with lime on undecorated wall surfaces two coats to give an even shade including throughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges635.18sqm
289289Constructing circular type man hole 1.40 metre internal diametre with RCC Top slab in 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1 cement : 3 sand finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing.(I) 2.50 metre deep with C.I. Cover and frame (medium duty) 500mm internal diametre total weight of cover and frame not less than 116 kg (weight of cover 58kg and weight of frame 58 kg.) (a) With walls 200mm thick upto 2.5 metre deep and 300mm for depth greater than 1.5metres (foundation C.C. 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) brick masonary using common burnt clay building bricks in cement mortar 1:3 (1cement : 3 sand).\n10no's
290290Providing and fixing recast RCC cover of NTC make with frame of size 500 mm dia as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax,10no's
291291Providing, laying (to level or slopes) and joining with stiff mixture of cement mortor in the proportion of 1:1 (1 cement : 1 sand) salt glazed stone ware pipes grade \"A\" of the following internal diametres including testing of pipes and joints complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax.\na) 200 mm dia155rmt
292292Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size) bedding for stone ware pipes of the following internal diametres, necessary from work & curing complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax..\na) 200 mm dia155rmt
293293Proding and laying stone aggregates / gravel 40 mm as per the entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax.13.23cum
294294Electrical Work :-\nExcavation in all kind of earth including their intermediate classification such as Pick work, Jumper work,Blasting work,soft rock, hard rock, including chiseling/wedging out of rock where blasting is prohibited, soft rock or hard rock, including salurated conditions etc. and bailing/ pumping out water stacking the excavated materials in all leads and lifts. Wherever possible/ required by the Engineer-in-Charge clear from the edge of excavation & then returning the stacked soil in 15cm. layers,when required into plinths sides of foundations etc. consolidating each deposited layer by ramming & watering & then disposing of all surplus excavated earth in all leads and lift at the approved dumping sites as per the direction of the Engineer-in-Charge12.96Cum
295295Providing and laying cement concrete 1:3:6 (one cement: three sand: six graded stone aggregate 40mm(forty milimete) nominal size) and curing complete excluding cost of form work in foundation and plinth as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all iincidential charges.1.94Cum
296296Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government15.12Sqm
297297P/L reinforced cement concrete 1:1½:3( one cement : one and half sand : three graded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) , and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. in Foundations,footings bases of columns and the like and mass concrete.5.34Cum
298298Providing and laying tor steel reinforcement for reinforced cement concrete work including bending, binding, cutting ,straighting and placing in position including cost of binding wire complete upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government534Kg
299299Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.\na) Group C578Each
300300Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/ recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.192P/mtr
301301Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.32Rmt
302302Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. HRFRLS / PVC insulated single core copper conductor cable of same size for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.\n2x1.5 sq. mm298Rmt
303303Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. HRFRLS / PVC insulated single core copper conductor cable of same size for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.\n2x6.0 sq. mm353Rmt
304304Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No. 16 Sq.mm. (4x16+2x16) HRFRLS /PVC insulated single core copper conductor cable for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.50Rmt
305305Supplying and fixing metal box of 100mmx100mm x 60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.38Each
306306Supplying and fixing metal box of 180mmx100mm x60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.39Each
307307Earthing with G.I. earth plate 600 mmx600 mmx 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required complete with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge.:-5P/set
308308Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge.:-5P/set
309309Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge.:-136.1Each
310310Providing and installation of exhaust fan of approved make of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.:- \nExhaust Fan Light Duty ( Domestic ) 300 mm sweep4Each
311311Providing and installation of exhaust fan of approved make of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.:- \nExhaust Fan Heavy Duty 450 mm sweep5Each
312312Supplying and fixing 20 Amps, 240 volts power unit, 2-pole & earth socket and switch on surface or in recess,complete with connections, testing and commissioning etc. as required. Make:-Legrand ,Havells,Philips,Panasonic, SYSKA or any other approved by Engineer-in-Charge as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.:-10Each
313313Supplying and fixing bakelite batten/angle holder of approved make including connections etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.60Each
314314Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge.:- \nCeiling Fan 1400 mm sweep ( Cat-A)116Each
315315Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.116Each
316316Providing and installation of ultra slim decorative LED batten 20 Watt with extruded aluminium heat sink, with anti glare polycarbonate diffuser and energy efficient constant current, integralelectronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips&loop in loop out wire, connections, testing and commissioning etc.as required. Make: Havells (Cat No LHEXBLP7PN1 W 020) or from this make wipro, Philips, Jaquar, Trilux, Panasonic complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.:-178Each
317317Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.\nDouble Door -6 way97Each
318318Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.\n Cat.-A99Each
319319Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as requiredcomplete with all leads,lift of materials and other incidentals complete.\n40 Amp Cat-A38Each
320320Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete with all leads,lift of materials and other incidentals complete.\n40 Amps. Cat-A.33Each
321321Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required complete with all leads,lift of materials and other incidentals complete.\n63 Amps. Cat-A.1Each
322322Providing and installation of LED 5 W retrofit lamp B-22/E-27 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects complete with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge.:- Make: Greatwhite, Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.104Each
323323Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.\nDouble Door -16 way1Each
324324Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge.\nDouble Door -4 way2Each
325325Providing and installation of following type of surface/ recess mounting slim square type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connection, testing and commissioning etc. as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. (9 watts) Make: Philips, Syska, Bajaj,Greatwhite, C&S, Panasonic or any other approved by Engineer-in-Charge.50Each
326326SITC of 2 Ton cold split type AC copper condenser including stabilizer and making connections testing etc.complete in all respects with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge.:-\nMake ( Voltas Cat No. 243Zyi) , Blue Star , LG, Hitachi, O General, Daikin, Mitsubishi, LG or any other approved by Engineer-in-charge.3Each
327327Supplying and fixing of Copper refrigerant piping with sleeve 1/2x1/4 inches with control cabling beyond 0 running meter for (Hi-wall split unit) with sleeves insulation etc. complete in all respect with best satisfaction of Engineer - in - Charge with all leads,lift of materials and other incidentals complete .24P/mtr
328328Supplying and fixing of PVC drain pipe for (Hi-wall split unit) complete in all respects with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge and with best satisfaction of Er-in-Charge.30P/mtr
329329Supplying and fixing of M.S stand for out door unit of suitable size(Readymade) complete in all respects with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge and with best satisfaction of Er-in-Charge.3P/mtr
330330Supplying installation testing and commissioning of 16.00mtr. High Mast light with steel grade 5355 as per BS-EN 10025 i/c all accessories complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.2Each
331331Providing and installation of High Wattage LED (250 watts IP rating IP-66)) Flood light in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, Bajaj,Greatwhite, C&S, Panasonic or any other approved by Engineer-in-Charge within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.12Each
332332Providing and Fixing aviation obstruction light twin long in all leads/ lifts, within all leads, lifts of materials and other incidentals complete as required.as per directed by the Engineer in Charge within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.2Each
333333Supplying and installation of High Mast control panel with one no. incomer 32A, 4 Pole MCB, 3 Pole 32A contactor 1no, 2nos 9A contactor for control panel, 1no timer analog type along with other electrical accessories . The High Mast control shall be mounted as a fabricated angle stand, within all leads,lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.2Each
334334Earthing with G.I earth pipe 4.5 mtr. long and 40 mm dia and 2.10 mtr Depth including accesoaries and providing masonary enclosure with cover plate having locking arrangement & watering pipe etc. ( but without charcoal or coke and salt) complete as required with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge2Each
335335Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation ,sand cushioning, protective covering and refilling the trench etc. of the required size:-Armoured cable 16 sq. mm (four core) complete as required with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge98P/rmt
336336Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation ,sand cushioning, protective covering and refilling the trench etc. of the required size:-Armoured cable 35 sq. mm (3.5 core) complete as required with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge20P/rmt
337337Supplying and erection light panel (confirming to IEC code -61439) of following depth sheet metal cubical pedestal of suitable dimensions 700mm (height) x 600mm (width) x 300mm (deep) with plus-minus 5cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement to hose 100 Amp. TP&N MCCB, 100 Amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgears. The cubical pedestal shall have cable entry box at one side, with epoxy powder coated approved paint and bonding to the existing earth etc. complete with all leads,lift of materials and other incidentals complete as directed by the Engineer in Charge.:-1Each

AI Tender Summary

OUR REF NO 22852257
AUTHORITY Government Departments
TENDER VALUE 2.63 Crore
LAST DATE 26-12-2019
Authority
Authority Name Himachal Pradesh State Agricultural Marketing Board
Work Description Up-Gradation & Strengthening Of Existing Wholesale Market Yard At Paonta Sahib, Distt. Sirmaur, Hp. Sh: - Site Development Work, Provision Of Retaining Wall, Fencing, Gate Post, C / O Toilet Block, Repair / Maintenance, Addition & Alteration Work In Administrative Office Building , Civil Works For Esmp Component, Ws & Si And Electrical Installation Work Thereof. Estimated Cost:Rupees 2, 63, 50, 265 / - Earnest Money: Rupees 5, 00, 000 / - Cost Of Form: Rupees 5900 / - Time Limit: Twenty One Months Class- A
Basic Detail
Tender No HMB/Project/Tender-Vol-I
Bidding Type Tender
Location
City Paonta Sahib
State Himachal Pradesh
Key Dates
Publish Date 10 Dec 2019
Submission Date 26 Dec 2019
Open Date 27 Dec 2019
Finance
Tender Value 2.63 Crore
Tender Fee 5900
EMD 5 Lakhs
Exemption Not Available
Document List
15B9A5CD-D5A9-48F8-AFF4-8BF7A8AD4670.html
Tendernotice_1.pdf
BOQ_47956.xls
Tender_Document_PaontaSahib.pdf
8788194_20709_12122019.rar

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 10, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 26, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 27, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

15B9A5CD-D5A9-48F8-AFF4-8BF7A8AD4670.html

pdf

Tendernotice_1.pdf

xls

BOQ_47956.xls

pdf

Tender_Document_PaontaSahib.pdf

rar

8788194_20709_12122019.rar

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders