1 . Modification Works Of Csb And Semen Dispatch Room 1 . Modification Works Of Csb And Semen Dispatch Room 2 . Quarantine Shed 3 . Repair To Compound Wall Behind The Bull Shed And Feed Store 4 . Painting Works Of The Compound Wall In Front Of Th
Tender Value
11.10 Lakhs
Estimated cost
Bid Submission
26 Dec 2019
0 days left
EMD
27750
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KLDB, DHONI → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
1 . Modification Works Of Csb And Semen Dispatch Room 1 . Modification Works Of Csb And Semen Dispatch Room 2 . Quarantine Shed 3 . Repair To Compound Wall Behind The Bull Shed And Feed Store 4 . Painting Works Of The Compound Wall In Front Of The Farm At Dhoni , Palakkad .
BOQ
| Name of Work: i) Modification works of CSB and Semen Dispatch room ii) Quarantine Shed iii) Repair to compound wall behind the bull shed and feed store iv) Painting works of the compound wall in front of the farm at Dhoni, Palakkad. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Modification works of CSB and Semen Dispatch room | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001113 | 85 | m2 |
| 3 | 1.02 | Demolishing brick work/laterite manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar | BI01010001010000000000000515BI0100001114 | 0.7 | m3 |
| 4 | 1.03 | Providing and laying in position cement concrete of specifiied grade excluding the cost of centering and shuttering- All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001115 | 4.27 | m3 |
| 5 | 1.04 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. | BI01010001010000000000000515BI0100001116 | 6.3 | m2 |
| 6 | 1.05 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001117 | 85.32 | m2 |
| 7 | 1.06 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | BI01010001010000000000000515BI0100001118 | 281.83 | m2 |
| 8 | 1.07 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | BI01010001010000000000000515BI0100001119 | 67.2 | kg |
| 9 | 1.08 | Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). | BI01010001010000000000000515BI0100001120 | 36.02 | Kg |
| 10 | 1.09 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. | BI01010001010000000000000515BI0100001121 | 16.73 | m2 |
| 11 | 1.1 | Marble stone flooring with 18 mm thick marble stone as per sample of marble approved by Engineer-in Charge, over 20mm (average) thick base of cement mortar 1:4 ( 1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with black Zebra. | BI01010001010000000000000515BI0100001122 | 1.8 | m2 |
| 12 | 1.11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | BI01010001010000000000000515BI0100001123 | 20.8 | m2 |
| 13 | 1.12 | Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm etc. 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I | BI01010001010000000000000515BI0100001124 | 42.66 | m2 |
| 14 | 1.13 | Unforeseen | BI01010001010000000000000515BI0100001125 | 1 | Nos |
| 15 | 2 | Quarantine Shed | BI01010001010000000000000515BI0100001126 | ||
| 16 | 2.01 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area beyond 3 sq. metres | BI01010001010000000000000515BI0100001127 | 3 | nos |
| 17 | 2.02 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil | BI01010001010000000000000515BI0100001128 | 202.12 | m2 |
| 18 | 2.03 | Providing and laying in position cement concrete of specifiied grade excluding the cost of centering and shuttering- All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001129 | 30.32 | m3 |
| 19 | 2.04 | Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15 cm or nearest available size confirming to IS 2185 part 1 of 1979 for superstructure above floor two level up to floor five level with thickness 15 cm in CM 1:6 ( 1 cement:6 course sand) etc. complete | BI01010001010000000000000515BI0100001130 | 0.45 | m3 |
| 20 | 2.05 | Providing and laying in position cement concrete of specifiied grade excluding the cost of centering and shuttering- All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001131 | 6.92 | m3 |
| 21 | 2.06 | 12 mm cement plaster of mix : 1:4 (1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001132 | 39.9 | m2 |
| 22 | 2.07 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | BI01010001010000000000000515BI0100001133 | 270 | kg |
| 23 | 2.08 | White washing with lime to give an even shade :\nNew work (three or more coats) | BI01010001010000000000000515BI0100001134 | 517.03 | m2 |
| 24 | 2.09 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | BI01010001010000000000000515BI0100001135 | 56.32 | m2 |
| 25 | 2.1 | Unforeseen | BI01010001010000000000000515BI0100001136 | 1 | Nos |
| 26 | 3 | Repair to compound wall behind the bull shed and feed store | BI01010001010000000000000515BI0100001137 | ||
| 27 | 3.01 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001138 | 45.36 | m3 |
| 28 | 3.02 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001139 | 8.4 | m2 |
| 29 | 3.03 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars | BI01010001010000000000000515BI0100001140 | 151.2 | Kg |
| 30 | 3.04 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\"1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001141 | 2.52 | m3 |
| 31 | 3.05 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete | BI01010001010000000000000515BI0100001142 | 121.77 | kg |
| 32 | 3.06 | Painting with synthetic enamel paint of approved brand and\nmanufacture to give an even shade : Two or more coats on new work | BI01010001010000000000000515BI0100001143 | 5.68 | m2 |
| 33 | 3.07 | Unforeseen | BI01010001010000000000000515BI0100001144 | 1 | Nos |
| 34 | 4 | Painting works of the compound wall in front of the farm | BI01010001010000000000000515BI0100001145 | ||
| 35 | 4.01 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :\n13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm\nover and including one coat of Special primer applied @\n0.75 ltr /10 sqm | BI01010001010000000000000515BI0100001146 | 572.34 | m2 |
| 36 | 4.02 | Painting with synthetic enamel paint of approved brand and\nmanufacture to give an even shade : Two or more coats on new work | BI01010001010000000000000515BI0100001147 | 17.21 | m2 |
| 37 | 4.03 | Unforeseen | BI01010001010000000000000515BI0100001148 | 1 | Nos |
AI Tender Summary
Tender Timeline
Dec 11, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 26, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 31, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender