Mch - Construction Of Cold Room For Walk In Cooler In The Srl Department Of Microbiology At Mch , Kottayam
Tender Value
6.46 Lakhs
Estimated cost
Bid Submission
17 Dec 2019
0 days left
EMD
16200
Bank guarantee accepted
Document Fee
1456
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kottayam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Mch - Construction Of Cold Room For Walk In Cooler In The Srl Department Of Microbiology At Mch , Kottayam
BOQ
| Name of Work: MCH - Construction of Cold room for walk in cooler in the SRL Department of Microbiology at MCH, Kottayam | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Appendix A- Civil works | |||
| 2 | 1.01 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.All kinds of soil | 11 | cum | |
| 3 | 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level -1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | 6 | cum | |
| 4 | 3 | Centering and shuttering including strutting, propping etc. and removal of form\nfor all heights : | |||
| 5 | 3.01 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | 18 | sqm | |
| 6 | 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : | |||
| 7 | 4.01 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm\nnominal size) | 2 | cum | |
| 8 | 5 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) | 9 | cum | |
| 9 | 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:11/2:3 (1cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) | 1 | cum | |
| 10 | 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more | 300 | kg | |
| 11 | 8 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m | 4 | cum | |
| 12 | 9 | Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 15cm in: CM 1:6 (1 cement : 6 coarse sand) etc. complete. | 12 | cum | |
| 13 | 10 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc. | 80 | kg | |
| 14 | 11 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) | 150 | sqm | |
| 15 | 12 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 300 | kg | |
| 16 | 13 | Roofing with GI trafford sheet powder coated 0.40 mm thick or nearest size with overlaps of 150mm at ends and G.I.bolts and nuts including bitumen washers etc. complete. | 75 | sqm | |
| 17 | 14 | Supplying and fixing 200 mm PVC pathy pipe | 15 | m | |
| 18 | 15 | Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/ly) :appropriate Z sections and other sections of approved makeappropriate Z sections and other sections of approved makeconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofconforming to IS: 733 and IS: 1285, fixing with dash fasteners ofjunctions, i.e. at top, bottom and sides with required EPDM rubber/including cleat angle, Aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separate.Polyester powder coated aluminium (minimum thicknessof polyester powder coating 50 micron) \n\n | 30 | kg | |
| 19 | 16 | For shutters of doors, windows & ventilators includingproviding and fixing hinges/ pivots and making provisionfor fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)\nPolyester powder coated aluminium (minimum thicknessof polyester powder coating 50 micron) \n\n | 30 | kg | |
| 20 | 17 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||
| 21 | 17.01 | With float glass panes of 5 mm thickness | 5 | sqm | |
| 22 | 17.02 | With float glass panes of 4 mm thickness | 5 | sqm | |
| 23 | 18 | Providing and fixing 9mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative laminationon one side and balancing lamination on other side. \n\n | 5 | sqm | |
| 24 | 19 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | 3 | nos. | |
| 25 | 20 | Supplying and fixing 150 mm powder coated Aluminium tower bolt | 6 | nos. | |
| 26 | 21 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | 3 | nos. | |
| 27 | 22 | Providing and fixing Fiber Glass 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutterReinforced plastic (FRP) Door Frames of crosssection of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | 6.1 | m | |
| 28 | 23 | Providing and fixing to existing door frames.30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | 4.2 | sqm | |
| 29 | 24 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. | 60 | sqm | |
| 30 | 25 | Fiber ceiling with PVC syntex sheet of thick 7.58mm with 20mm and fixing into 25mm aluminium square pipe laying at 75cm c/c bothwise fixing at 20mm aluminum angle at side and fixing the verticals by using 25mm square pipe and plugging verticals with RCC Concere by using plug srews etc complete | 50 | sqm | |
| 31 | 26 | Supplying and fixing Sun control film over plain glass including all cost and labour charges etc complete. | 25 | sqm | |
| 32 | 27 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 145 | sqm | |
| 33 | 28 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer | 100 | sqm | |
| 34 | 29 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work | 100 | sqm | |
| 35 | 30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | 60 | sqm | |
| 36 | 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work | 30 | sqm | |
| 37 | 32 | Labour engaged for petty repairs | |||
| 38 | 32.01 | Beldar | 5 | day | |
| 39 | 33 | APPENDIX - B - Water Supply and Sanitary Works | |||
| 40 | 33.01 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : | |||
| 41 | 33.02 | White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap | 2 | Each | |
| 42 | 34 | Supplying laying and joining PVC pipe for internal works with all fittings such as Tees, bends,elbows, etc with clamps including cutting and making good the walls including cost and conveyance etc cmplete. | |||
| 43 | 34.01 | 25 mm dia PVC pipe (10kgf/cm2) | 10 | metre | |
| 44 | 34.02 | 63 mm dia PVC pipe (8 kgf/cm2) | 10 | metre | |
| 45 | 35 | Supplying 600x20mm or nearest size C.P. brass towel rail . | 2 | Each | |
| 46 | 36 | Supplying and fixing CP soap dish. | 2 | Each | |
| 47 | 37 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore | 2 | Each | |
| 48 | 38 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore | 2 | Each |
AI Tender Summary
Tender Timeline
Dec 10, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 17, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 19, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender