Special Flooring For Aviation Maintenance Hanger At Likabali, 104 Engr Regt-Assam

special flooring for aviation maintenance hanger at likabali , for : likabali , supply and laying antistatic pu epoxy flooring 3mm thick ( a ) surface preparation by cleaning surface from dust , dist , muck , moisture & all foreign material and cleaned by mechanical means using machanical scrubber / grinder . ( b ) providing and applying of primer cipoxy 14 which shall be a two component , solvent-free , epoxy-polyamido amine system having a volumetric ratio of mixing of 1:1 to yield thickness of 200 microns ( c ) providing and applying the screed layer with cipoxy 15 of minimum thickness of 2000 microns . the self leveling screed shall consist of a low viscous epoxy-amine cured system and graded aggregates ( special silica ) . the epoxy system shall have a volumetric ratio of mixing of resin in 2:1 ratio . the aggregates shall be added in the ratio of 2:1:3 ( d ) providing and fixation of copper tape ( e ) conductive coat of 100 microns with aquoxy esd will be applied after copper tape fixation which will be supplied in the ratio of 3:1 . ( f ) anti-static epc top coat with cipy cipothane esd 108 will be applied which shall be supplied in pre-weighed pacjs and ready to mix and use which will consisits of resin , hardener , epi ( colour concentrate ) and formulated aggregates + carbon fibre to agitate the mixture by and electrically driven motor and lay the mixture to the thickness of 1000 microns . ( g ) m&l for providing & applying polyurethane based sealant in expansion joints which includes cut open the existing joints , removal of existing sealant / bitumen etc and laying cipys pu sealant episeal / polyseal 51 ( h ) m&l for providing & applying polyurethane based sealant in construction / dummy joints which includes cut open the existing joints , removal of existing sealant / bitumen etx and laying joint filling material ( j ) m&l for providing & applying polyurethane based demarcation system over top coat , supply and laying antistatic pu epoxy flooring 5mm thick ( a ) surface preparation by cleaning surface from dust , dist , muck , moisture & all foreign material and cleaned by mechanical means using machanical scrubber / grinder . ( b ) providing and applying of primer cipoxy 14 which shall be a two component , solvent-free , epoxy-polyamido amine system having a volumetric ratio of mixing of 1:1 to yield thickness of 200 microns ( c ) providing and applying the screed layer with cipoxy 15 of minimum thickness of 2700 microns . the self leveling screed shall consist of a low viscous epoxy-amine cured system and graded aggregates ( special silica ) . the epoxy system shall have a volumetric ratio of mixing of resin in 2:1 ratio . the aggregates shall be added in the ratio of 2:1:3 ( d ) providing and fixation of copper tape ( e ) conductive coat of 100 microns with aquoxy esd will be applied after copper tape fixation which will be supplied in the ratio of 3:1 . ( f ) anti-static epc top coat with cipy cipothane esd 108 will be applied which shall be supplied in pre-weighed pacjs and ready to mix and use which will consisits of resin , hardener , epi ( colour concentrate ) and formulated aggregates + carbon fibre to agitate the mixture by and electrically driven motor and lay the mixture to the thickness of 2000 microns . ( g ) m&l for providing & applying polyurethane based sealant in expansion joints which includes cut open the existing joints , removal of existing sealant / bitumen etc and laying cipys pu sealant episeal / polyseal 51 ( h ) m&l for providing & applying polyurethane based sealant in construction / dummy joints which includes cut open the existing joints , removal of existing sealant / bitumen etx and laying joint filling material ( j ) m&l for providing & applying polyurethane based demarcation system over top coat

Refer document

INR 1026500.0 /-

Refer document