Supply Of Consumable And Non Consumable Items For Orthopedics, Dr BSA Hospital Rohini Delhi-Delhi

Supply Of Consumable And Non Consumable Items For Orthopedics - Schanz Screw 2.5 / 3.0 Mm 3 Schanz Screw 3.5 / 4.5 Mm ( Thread Sizes 12 / 18 Mm ) 4 Schanz Screw 5.0 / 5.5 Mm ( Cortical And Cancellous ) ( Thread Size 12 / 18 / 32 Mm ) 5 Denham’S Pin 4.5 / 5.0 Mm 6 Steinman Pin 3.0 / 3.5 Mm 7 Steinman Pin 4.5 / 5.0 Mm 8 Universal External Fixator Clamp 9 Tube To Tube Clamps 10 Tubular Rods –4’’, 6’’, 8” 11 Tubular Rods –10, 12, 14” 12 Forearm Fixator Clamps For 2.5Mm Pins 13 Forearm Fixator Clamps For 3.5Mm Pins 14 Forearm Fixator Connecting Rods – All Sizes 15 Forearm Fixator Radio Lucent Carbon Connecting Roads All Sizes 16 Spanners ( Size 6 / 7, 8 / 9 , 10 / 11 ) 17 Box Spanner ( 8 / 9 / 10 / 11 ) 18 Ring Fixator Set: One Set Consists Of Eight Half Rings Stainless Steel ( 120 To 220 Mm ) , Eight 1.8 Mm K Wires ( Bayonet And Trocar Tip ) , 12 Threaded Rods ( 4 To 10” ) , 16 Slotted Nuts ( Centric / Eccentric / Schanz Screw Holding ) , 8 Ring Connecting Bolts, 4 Washers, 80 Nuts, 2 Spanners Size 10. 19 Ring Fixator Set: One Set Consists Of Eight Carbon Fiber Half Rings ( 120 To 220 Mm ) , Eight 1.8 Mm K Wires ( Bayonet And Trocar Tip ) , 12 Threaded Rods ( 4 To 10” ) , 16 Slotted Nuts ( Centric / Eccentric / Schanz Screw Holding ) , 8 Ring Connecting Bolts, 20 Washers, 80 Nuts, 2 Spanners Size 10 20 K Wires 1.8Mm For Illizarov 21 Threaded Rods – 4”, 6” 22 Threaded Rods –8”, 10” 23 Threaded Rods –12” 24 Twisted Plate ( Misc Sizes ) 25 Straight Plate ( Misc Sizes ) 26 Male Posts ( 1 To 5 Hole ) 27 Female Posts ( 1 To 5 Hole ) 28 Hexagonal Socket ( Misc Length ) 29 Telescopic Rods 30 Concavo- Convex Washers 31 Hinges For Illizarov Ring 32 Complete Set Of Jess Assembly ( Medium / Large ) For Ctev ( Comprises Of 30 Link Joints , 4 L Rods , 2 Z Rods , 4 Distractors, 2 Large Connecting Rods, 6 Straight Connecting Rods And 2 Allens Key Etc. ) 33 Distractor- Small, With 4 Shanz Screws, 1.5 / 2.5 Mm, With One Allen Key. Unilateral Distracter With Clamps For Two Pins Proximal And Two Distal, Suitable For Application On Fingers 34 Distractor- Medium, With 4 Shanz Screws, 2.5 / 3.5 Mm, With One Allen Key. Unilateral Distracter With Clamps For Two Pins Proximal And Two Distal, Suitable For Application On Wrist 35 Distractor- Large, With 4 Shanz Screws, 3.5 Mm, With One Allen Key. Unilateral Distracter With Clamps For Two Pins Proximal And Two Distal, Suitable For Application On Forearm And Ankle 36 Radio Lucent Forearm Distractors With 4 Shanz Screws, 3.5 Mm, With One Allen Key. Unilateral Distracter With Clamps For Two Pins Proximal And Two Distal, Suitable For Application On Forearm 37 Monoaxial External Fixation Device Set With Provision Of Bone Transport. One Set Comprising Of One Mono Rail, Three Clamps ( Central Clamp / End Clamp / Swivel Clamp ) , Two Compression Distraction Unit ( Misc Sizes ) , Allen Key, Six Tapered Schanz Screws, 6.0 To 6.5 Mm Diameter ( Limb Reconstruction System ) * 38 Monoaxial External Fixation Device Set With Provision Of Bone Transport. One Set Comprising Of One Mono Rail, Three Clamps ( Central Clamp / End Clamp / Swivel Clamp ) , Two Compression Distraction Unit ( Misc Sizes ) , Allen Key, Six Tapered Schanz Screws, 6.0 To 6.5 Mm Diameter ( Limb Reconstruction System ) * ( For Upper Limb ) 39 K Nail Sizes 8-14Mm, Length 32-44Cm 40 Radius Intramedullary Nails 2-4Mm Diameter, 22-32 Cm Length 41 Ulna Intramedullary Nails 2-4Mm Diameter, 22-32 Cm Length 42 3.5Mm Reconstruction Plates ( Locking And Non-Locking ) 5-12 Holes With Nine 3.5Mm Screws ( Stainless Steel ) 43 3.5Mm Reconstruction Plates ( Locking And Non-Locking ) 5-12 Holes With Nine 3.5Mm Screws ( Titanium ) 44 3.5Mm Low Contact Dcp 6-12 Holes With Nine 3.5 Mm Cortical Screws ( 12 To 24 Mm ) ( Stainless Steel ) 45 3.5Mm Low Contact Dcp 6-12 Holes With Nine 3.5 Mm Cortical Screws ( 12 To 24 Mm ) ( Titanium ) 46 1 / 3 Tubular Plates 6-8 Holes With Eight 3.5.Mm Cortical Screws ( 12 To 24 Mm ) ( Stainless Steel ) 47 1 / 3 Tubular Plates 6-8 Holes With Eight 3.5.Mm Cortical Screws ( 12 To 24 Mm ) ( Titanium ) 48 4.5 Mm Narrow Dcp, Low Contact, 7-12 Holes With Nine 4.5Mm Screws ( 14-28Mm Length ) ( Stainless Steel ) 49 4.5 Mm Narrow Dcp, Low Contact, 7-12 Holes With Nine 4.5Mm Screws ( 14-28Mm Length ) ( Titanium ) 50 4.5Mm Narrow Low Contact Locking Compression Plate 6-12 Holes With Eight Locking Screws And Four Non Locking Screws ( Stainless Steel ) ( 14-28Mm Length ) ( Stainless Steel ) 51 Narrow Low Contact Locking Compression Plate 6-12 Holes With Eight Locking Screws And Four Non Locking Screws ( Stainless Steel ) ( 14-28Mm Length ) ( Titanium ) 52 4.5 Mm Broad Low Contact Locking Compression Plate, 6-18 Holes With Nine 4.5Mm Screws ( 14-28Mm Length ) ( Stainless Steel ) 53 4.5 Mm Broad Low Contact Locking Compression Plate, 6-18 Holes With Nine 4.5Mm Screws ( 14-28Mm Length ) ( Titanium ) 54 2.7 Mm Sfs Dcp, 5 To 8 Holes With Eight 2.7 Mm Screws ( Length 10 – 20 Mm ) ( Stainless Steel ) 55 2.7 Mm Sfs Dcp, 5 To 8 Holes With Eight 2.7 Mm Screws ( Length 10 – 20 Mm ) ( Titanium ) 56 Pelvis Reconstruction Plates, Prebent All Sizes ( Instrumentation To Be Provided Free Of Charges During The Surgeries ) , With Ten Screws, Ss* 57 Pelvis Reconstruction Plates, Prebent All Sizes ( Instrumentation To Be Provided Free Of Charges During The Surgeries ) , With Ten Screws, Titanium* 58 4.0Mm Cannulated Cancellous Screw, Partially Threaded With Guide Wire And Washer , ( Length30-60Mm ) , Various Thread Lengths ( Stainless Steel ) 59 4.0Mm Cannulated Cancellous Screw, Partially Threaded With Guide Wire And Washer , ( Length30-60Mm ) , Various Thread Lengths ( Titanium ) 60 6.5Mm Partially Threaded Cancellous Screw With Washer ( Length 35-110Mm, Thread Lengths 12Mm / 16Mm / 32Mm ) ( Stainless Steel ) 61 6.5Mm Partially Threaded Cancellous Screw With Washer ( Length 35-110Mm, Thread Lengths 12Mm / 16Mm / 32Mm ) ( Titanium ) 62 7.0Mm Cannulated Cancellous Screw, Partially Threaded With Guided Wire And Washer ( Length 65 To 110Mm, Thread Lengths 12Mm / 16Mm / 32Mm ) * ( Stainless Steel ) 63 7.0Mm Cannulated Cancellous Screw, Partially Threaded With Guided Wire And Washer ( Length 65 To 110Mm, Thread Lengths 12Mm / 16Mm / 32Mm ) * ( Titanium ) 64 Washer For Screws Sizes 4 Mm , 4.5 Mm, 6.5 Mm , 7 Mm ( Stainless Steel ) 65 Washer For Screws Sizes 4 Mm , 4.5 Mm, 6.5 Mm , 7 Mm ( Titanium ) 66 Mini Fragment Plates ( 1.5 / 2.0 / 2.4 Mm ) *, Locking ( All Sizes, Different Shapes ) And Corresponding Screws ( Screw Heads Star Head And Low Profile ) . One Set Comprises Of One Plate And 6 Screws. Titanium Make. 67 Proximal Tibial Lateral Anatomical Locking Plate 5 To 11 Holes With Nine 4.5 Mm Locking Screws And Two 4.5Mm Cortical Screws. ( Stainless Steel ) 68 Proximal Tibial Lateral Anatomical Locking Plate 5 To 11 Holes With Nine 3.5 Mm Locking Screws And Four 3.5 Mm Cortical Screws; Should Have Atleast 4 Screws In Periarticular Region. ( Titanium ) 69 Proximal Tibial Medial Anatomical Locking Plate 5 To 11 Holes With Nine 3.5Mm Locking Screws And Six 3.5 Mm Cortical Screws, Atleast 3 Screws In Periarticular Region ( Titanium ) 70 Distal Tibial Medial Anatomical Locking Plate 5 To 11 Holes With 9 Locking Screws And Six Cortical Screws ( Stainless Steel ) 71 Distal Tibial Medial Anatomical Locking Plate 5 To 11 Holes With 9 Locking Screws And Six Cortical Screws ( Titanium ) 72 Distal Tibial Metaphyseal Plate 5 To 11 Holes With 9 Locking Screws And 4 Cortical Screws ( Stainless Steel ) * 73 Distal Tibial Metaphyseal Plate 5 To 11 Holes With 9 Locking Screws And 4 Cortical Screws ( Titanium ) * 74 Distal Tibial Anterolateral Anatomical Locking Plate 5 To 11 Holes With 9 Locking Screws And Four Cortical Screws, Atleast 4 Screw In Periarticular Region ( Stainless Steel ) 75 Distal Tibial Anterolateral Anatomical Locking Plate 5 To 11 Holes With 9 Locking Screws And Four Cortical Screws, Atleast 4 Screw In Periarticular Region ( Titanium ) 76 Distal Radius Dorsal Anatomical Locking Plates 2.4 / 2.7 Mm, T And L Shape, 4 To 6 Holes With 4 Locking Screws And 2 Cortical Screws ( Star Headed Screws ) ( Titanium ) 77 Radial Styloid Anatomical Locking Plates 2.4 / 2.7 Mm, 4 To 6 Holes With 4 Locking Screws And 2 Cortical Screws ( Star Headed Screws ) ( Titanium ) 78 Radial Head Anatomical Locking Plates With Screws ( Titanium ) 79 Proximal Radius Anatomical Locking Plates For Fixation Of Radial Head And Neck Fractures, 2.4 / 2.7 Mm, 4 To 6 Holes With 4 Locking Screws And 2 Cortical Screws ( Star Headed Screws ) ( Titanium ) 80 Distal Femur Lateral Anatomical Locking Plate, 6 To 12 Holes On The Shaft, With 10 Locking Screws And Six 4.5Mm Cortical Screws. ( Stainless Steel ) 81 Distal Femur Medial Anatomical Locking Plate, 6 To 12 Holes On The Shaft, With 10 Locking Screws And Six 4.5Mm Cortical Screws. ( Titanium ) 82 Patellar Locking Plate, Low Profile Anatomical With 2.7 And 3.5 Mm Locking Screws ( Titanium ) ( Instrumentation To Be Provided Free Of Charges During Surgeries ) * 83 Distal Humerus Anatomical Locking Plate Set ( Two Plates – One Medial And One Lateral, With 6 Locking Screws And 6 Cortical Screws ) , 4 To 8 Holes On The Shaft Of The Plate. ( Stainless Steel ) 84 Distal Humerus Anatomical Metaphyseal Locking Plate Suitable For Fixation Of Metaphyseal Fractures Of The Distal Humerus With 6 Locking Screws And 6 Cortical Screws, 6 To 14 Holes. ( Stainless Steel ) 85 Distal Humerus Anatomical Metaphyseal Locking Plate Suitable For Fixation Of Metaphyseal Fractures Of The Distal Humerus With 6 Locking Screws And 6 Cortical Screws, 6 To 14 Holes. ( Titanium ) 86 Proximal Ulna Anatomical Locking Plate Suitable For Fixation Of Proximal Ulna Fractures With 8 Locking Screws And 8 Cortical Screws, 4 To 8 Screws On The Shaft. ( Stainless Steel ) 87 Proximal Ulna Anatomical Locking Plate Suitable For Fixation Of Proximal Ulna Fractures With 8 Locking Screws And 8 Cortical Screws, 4 To 8 Screws On The Shaft. ( Titanium ) 88 Proximal Femoral Anatomical Locking Plate Suitable For Fixation Of Proximal Femur Fractures With 8 Locking Screws And 8 Cortical Screws ( Stainless Steel ) 89 Proximal Femoral Anatomical Locking Plate Suitable For Fixation Of Proximal Femur Fractures With 8 Locking Screws And 8 Cortical Screws ( Titanium ) 90 Proximal Femoral Plate For Periprosthetic Fractures With 8 Locking Screws And 8 Cortical Screws ( Stainless Steel ) 91 Proximal Femoral Plate For Periprosthetic Fractures With 8 Locking Screws And 8 Cortical Screws ( Titanium ) 92 Anatomical Locking Plate For Wrist Arthrodesis, Suitable For Fixation Of Wrist Arthrodesis With Or Without Proximal Row Carpectomy, 2.4 / 2.7 Mm Distal Screw Size. With 3 Proximal And 3 Distal Screws ( Titanium ) 93 Anatomical Locking Lateral End Clavicle Plate With 2.7 And 3.5 Mm Locking Screws. Set Comprising Of One Plate, Four 2.7 And Three 3.5 Mm Locking Screws ( Stainless Steel ) 94 Titanium Proximal Medial Tibial Osteotomy Locking Plate For Hto With Hydroxyapatite Wedges 7.0 / 9.0 / 11.0 Mm * 95 Coventary Staples Titanium / U Staples, Misc Sizes 96 1.5 Mm Cortical Screws For Fixation Of Small Bones, Low Profile Head, 8 To 16 Mm Length, Star Head, Titanium * 97 2.0 Mm Cortical Screws For Fixation Of Small Bones, Low Profile Head, 8 To 16 Mm Length, Star Head, Titanium * 98 2.4 Mm Cortical Screws For Fixation Of Small Bones, Low Profile Head, 8 To 16 Mm Length, Star Head, Titanium * 99 Proximal Femoral Nail – 34 To 44 Cm Length, 9 To 12 Mm Diameter, With Two Proximal And Two Distal Locking Bolts. ( Instrumentation To Be Provided Free Of Charges During The Surgery ) ( Stainless Steel ) 100 Proximal Femoral Nail – 34 To 44 Cm Length, 9 To 12 Mm Diameter, With Two Proximal And Two Distal Locking Bolts. ( Instrumentation To Be Provided Free Of Charges During The Surgery ) ( Titanium ) * 101 Proximal Femoral Nail With Single Screw / Blade / Functional Single Screw To Provide Rotational Stability To The Neck. Sizes: Small To Long.One Set Comprises Of One Nail Plus Functional Screw / Blade, End Cap, And Two Distal Locking Bolts ( Titanium ) * 102 Interlocking Nails For Femur With 2 Proximal And 2 Distal Locking Screws ( Nail Diameter 9- 12Mm, Length 36-44Mm ) ( Stainless Steel ) 103 Interlocking Nails For Tibia With 2 Proximal And 2 Distal Locking Screws ( Nail Diameter 8- 10Mm, Length 26-34Mm ) ( Stainless Steel ) 104 Tibial Nail ( Expert Type ) For Proximal And Distal Metaphyseal Fractures With 6 Locking Bolts, Misc Sizes ( Stainless Steel ) 105 Distal Femoral Nail With Two Proximal And Three Distal Locking Screws, Antero-Posterior Curve To Accommodate The Curve Of Femur ( Nail Diameter 9-12Mm, Length Options In Increment Of 2 Cm From Approx. 26 Cm-38 Cm ) , Proximal Locking Option Preferably In Antero-Posterior Direction ( Stainless Steel ) 106 Distal Femoral Nail With Two Proximal And Three Distal Locking Screws, Antero-Posterior Curve To Accommodate The Curve Of Femur ( Nail Diameter 9-12Mm, Length Options In Increment Of 2 Cm From Approx. 26 Cm-38 Cm ) , Proximal Locking Option Preferably In Antero-Posterior Direction ( Titanium ) * 107 Reconstruction Nail For Femur With Provision Of Trochanteric Entry Point, Diameter 9-12Mm And 36-44Cm Length With Four Bolts Of Assorted Size 108 Titanium Elastic Nail 2.0 / 2.5 / 3.0 / 3.5 / 4.0 Mm 109 Dhs Set Consisting Of One Richard Screw ( 65- 110Mm ) , One Compression Screw, One Short / Long Barrel Plate ( 4-8 Holes ) , & 4 Cortical Screws, Misc Sizes 110 Dcs Set Consisting Of One Richard Screw, One Compression Screw, One Plate ( 4-8 Holes ) , And Five 4.5 Mm Cortical Screws, One 6.5 Mm Cancellous Screw 111 Dcs Set Consisting Of One Richard Screw, One Compression Screw, One Plate ( 9- 14 Holes ) , And Six 4.5 Mm Cortical Screws, One 6.5 Mm Cancellous Screw 112 Spool Of Stainless Steel Malleable Wire 16 To 22 G 113 Ss Kirschner Wires 0.5 / 0.6 Mm, Diameter, 6” Length, Both Ends Sharp 114 Ss Kirschner Wires 0.5 / 0.6 Mm, Diameter, 12” Length, Both Ends Sharp 115 Ss Kirschner Wires 0.9Mm / 1.0 Mm, Diameter, 6” Length, Both Ends Sharp 116 Ss Kirschner Wires 0.9Mm / 1.0 Mm, Diameter, 12” Length, Both Ends Sharp 117 Ss Kirschner Wires 1.2Mm / 1.5Mm / 2Mm / 2.5Mm / 3Mm Diameter, 6” Length, Both Ends Sharp 118 Ss Kirschner Wires 1.2Mm / 1.5Mm / 2Mm / 2.5Mm / 3Mm Diameter, 12” Length, Both Ends Sharp 119 Ss Kirschner Wires 0.5 / 0.6, 0.9Mm / 1.0, 1.2Mm / 1.5Mm / 2Mm / 2.5Mm / 3Mm, Diameter 6” Length, Fully Threaded 120 Ss Kirschner Wires 0.5 / 0.6 Mm, Diameter, 6” Length, Partially Threaded 121 Ss Kirschner Wires 0.5 / 0.6 Mm, Diameter, 12” Length, Partially Threaded 122 Ss Kirschner Wires 0.9Mm / 1.0 Mm, Diameter, 6” Length, Partially Threaded 123 Ss Kirschner Wires 0.9Mm / 1.0 Mm, Diameter, 12” Length, Partially Threaded 124 Ss Kirschner Wires 1.2Mm / 1.5Mm / 2Mm / 2.5Mm / 3Mm Diameter, 6” Length, Partially Threaded 125 Titanium Facet Hooks / Laminar Hooks / Transverse Process Hooks With Various Off- Sets- Small And Large * 126 Titanium Top Loading Pedicle Screw Set Percutaneous Cannulated ( 5.5Mm / 6.5Mm ) Diameter 4 Polyaxial Screws With 2 Rods ) Misc Sizes * 127 Device For Intervertebral Assisted Motion 8Mm, 10Mm, 12Mm, 14Mm * 128 Titanium Anterior Staples 13 Mm, 15Mm, 17 Mm 129 Plif Cage Peek 7-14 Mm, Foot Print 22-28 Mm. 1 Set Consists Of 2 Pcs * 130 Tlif Cage Peek 7-14 Mm, Foot Print Small / Medium / Large. 1 Set Consists Of 1 Pc * 131 Laminoplasty Spacer Peek With 2 Screws Misc Sizes * 132 Kyphoplasty Kit * 133 Vertebroplasty Kit * 134 Absorbable Haemostat ( Oxidized Regenerated Cellulose ) , Sterile 1.25 X 5Cm 135 Hemostatic Matrix Plus Flex Tip ( Flowable Haemostat ) * 136 Non- Suture Self Adhesive Artificial Dural Membrane ( Small / Medium Size ) 137 Knuckle Bender Splint ( Small, Medium & Large ) 138 Short Finger Splint 139 Upper Limb Splint, Above Elbow With Hinge At Elbow 140 Dynamic Finger Splint For Extension Of Proximal Interphalangeal Joint 141 Dynamic Finger Splint For Flexion Of Proximal Interphalangeal Joint 142 Knee Brace With Hinge At Knee With Drop Lock ( Custom- Made ) 143 Patellar Tendon Bearing Brace ( Custom- Made ) 144 Ls Corset ( Custom- Made ) 145 Somi Brace ( Different Sizes ) 146 Halo Sustem 1.-Glass Composite Ring For Mri Compatibility 2-.Non -Conductive Ceramic Pin 3.-Assorted Sizes Halo Rings 4.-Assorted Sizes Vest 5.-Assorted Sizes Ceramic Pins* 147 Cervical Collar With Adjustable Button For Occipital Fit, Removable Sternal Pad And Provision Of Thoracic Extension * 148 Adhesive Skin Traction Kit ( Different Sizes ) 149 Crepe Bandage 4 Inch Size 150 Crepe Bandage 6 Inch Size 151 Stockinette For Upper Limb 152 Stockinette For Lower Limb 153 Orthopaedic Casting Tape Made Of Specially Knittted Polyester Fabric, Impregnated With Polyurethane Resin. With Water Resistant Cast Padding , Size 10 Cm X 240 Cm 154 Orthopaedic Casting Tape Made Of Specially Knittted Polyester Fabric, Impregnated With Polyurethane Resin. With Water Resistant Cast Padding, Size 12.5 Cm X 360 Cm 155 Plaster Of Paris Bandages 4” X 2.7Mtr 156 Plaster Of Paris Bandages 6”X2.7 Mtr. 157 Head Halter Traction Kit With Spreader, Rope, Pulley And Weight 158 Floor Suction Disc For Arthroscopy 159 Sterile Tur Set / Y Connector 160 Silicon Cannula With Diameter Of 6 / 8 / 10 Mm With Length Of 2 To 5 Cm ( In All Sizes ) 161 Sterile Camera Cover 162 Biocomposite / Peek Anchor Suture Of Diameter 4.5 To 6 Mm With Double Loaded No 2 Fibrewire Thread* 163 Titanium Anchor Suture Of Diameter 2.2 To 2.8 Mm With Double Loaded No 2 Fibrewire Thread* 164 Titanium Anchor Suture Of Diameter 4.5 To 6 Mm With Double Loaded No 2 Fibrewire Thread With Needle* 165 Biocomposite / Peek Anchor Suture Of Diameter 4.5 To 6 Mm With Triple Loaded Thread* 166 Knotless Instability Anchor With Peek Suture Eye & Bio-Composite Material ( Biphasic Beta Tricalium Sulphate & Plla ) Anchor Body With Tap-In Design For Strong Fixation . It Should Have Diameter Of 2.5 - 3 Mm With Length Of 15-16 Mm* 167 Knotless Instability Anchor With Peek Suture Eye & Bio-Composite Material ( Biphasic Beta Tricalium Sulphate & Plla ) Anchor Body With Tap-In Design For Strong Fixation . It Should Have Diameter Of 4.5 - 4.9 Mm With Length Of 17 - 19.5 Mm* 168 Endobutton : Titanium Metal 169 All Inside Meniscal Repair Device For Meniscal Tear Either Longitudinal Or Radial, In Sterile Pack; Each Unit Must Be Able To Make Atleast Two Mattress Knots And Have Two Peek Implants. Along With Suture Cutter If Required* 170 Ethibond Or Similar Poly-Ethylene Terepthalate, Braided Non-Absorbable Suture No.5 ( 4 Sutures On Needle In One Pack ) 171 Ethibond Or Similar Poly-Ethylene Terepthalate, Braided Non-Absorbable Suture No.2 ( 4 Sutures On Needle In One Pack ) 172 Ethibond Or Similar Poly-Ethylene Terepthalate, Braided Non-Absorbable Suture No. 2.0 On Needle 173 Disposable Suture Passer With Lasso For Shoulder Arthroscopy; Right And Left 45 Degree Angled. * 174 Sterile Underwater Electrosurgical Device With 900 Bent For Use In Arthroscopy With Three Pin Connector Compatible To Cautery Machine 175 Osteochondral Graft Harvest And Transfer Set For Different Sizes ( 6 Mm, 8 Mm 10Mm ) , Sterile Disposable* 176 Disposable O Drape With Fluid Collection Bag For Knee Arthroscopy ( Size 130 Cm X 200 Cm ) 177 Disposable O Drape With Fluid Collection Bag For Shoulder Arthroscopy ( Size 130 Cm X 200 Cm ) 178 Glycine Bottle 3 Litre Size 179 Normal Saline Bottle 3 Litre Size 180 Low Viscocity Pmma Bone Cement 20 Mg* 181 Low Viscocity Pmma Bone Cement 40 Mg* 182 Antibiotic ( Gentamycin ) Impregnated Pmma Bone Cement 40 Mg* 183 Austin Moore Prosthesis ( 39-53 Mm Size ) 184 Cemented Total Hip System* • Cemented Tapered Stem Having Various Sizes. • Metal Heads Having Variable Offset ( Small / Medium / Large / Extra Large ) With Diameter Of 28 / 32 Mm Compatible With The Stem. • Cemented Cup With Long Posterior Wall Made Of Uhmwpe With Various Od ( 40, 43, 47, 50, 53 ) Having Internal Diameter Of 28 Mm. • Cement Restrictor In Various Sizes To Restrict The Cement To Flow Distally Into The Femoral Canal. • Centralizer To Place The Stem Centrally Into The Femoral Canal. • Antibiotic Loaded Bone Cement 40 Gm - 2 Packets. 185 Non Cemented Total Hip System ( Metal On Poly ) * • Non Cemented Ha / Porous Coated Stem Having Various Sizes, Can Accept Multiple Offsets Of Metal Heads ( Small / Medium / Large / Extra Large ) With Diameter Of 28Mm. • Metal Heads ( Made Of Alloy Co+Cr+Mo ) Having Variable Offset ( Small / Medium / Large / Extra Large ) With Diameter Of 28Mm Compatible With The Stem. • Non Cemented Porous Coated Acetabular Cup Made Of Titanium Alloy Available In Various Sizes, With Locking Mechanism To Accept Polyethylene Liner Of Various Sizes & Diameter ( 28Mm ) , Must Have Holes In Dome Area For Screw Fixation.• The Polyethylene Liner Should Be Highly Cross-Linked With Various Diameter & Sizes Compatible With Acetabular Cup & Can Accept Various Metal Heads. • 3 Cancellous Screws Made Of Titanium To Fix The Cup Into The Acetabulam. 186 Non Cemented Total Hip System ( Ceramic Head On Poly ) * • Non Cemented Ha / Porous Coated Stem Having Various Sizes, Can Accept Multiple Offsets Of Metal Heads ( Small / Medium / Large / Extra Large ) With Diameter Of 28 / 32 / 36. • Ceramic Heads ( Made Of Delta Ceramic ) Having Variable Offset ( Small / Medium / Large / Extra Large ) With Diameter Of 28 / 32 / 36 Mm Compatible With The Stem. • Non Cemented Porous Coated Acetabular Cup Made Of Titanium Alloy Available In Various Sizes, With Locking Mechanism To Accept Polyethylene Liner Of Various Sizes & Diameter ( 28 / 32 / 36 ) , Must Have Holes In Dome Area For Screw Fixation. • The Polyethylene Liner Should Be Highly Cross-Linked With Various Diameter & Sizes Compatible With Acetabular Cup & Can Accept Various Heads. • 3 Cancellous Screws Made Of Titanium To Fix The Cup Into The Acetabulam. 187 Modular Bipolar Hemiarthroplasty System* • Modular Bipolar Shell Containing Hdpe Inbuilt Of Different Sizes ( 39-53Mm Outer Diameter And 22 / 28 Mm Inner Diameter In Three Different Neck Length ) • Cemented Tapered Femoral Stem ( Different Sizes: Extra Small, Small, Medium, Large ) • Cement Restrictor • Centralizer• 1 Packet Of Bone Cement 40 G 188 Revision Hip Stem: Extensively Porous Coated * With Modular Neck And Head. 189 Revision Hip Stem: Modular Proximal Component* • Proximal Modular Femoral Component With Porous Coating Which Can Be Placed In Independent Version • Independent Diaphyseal Fixation , With Modular Neck And Head 190 Acetabular Re-Enforcement Rings With 3 Screws* 191 Sterile Orthopedic Cable With Single Crimp System For Periprosthetic Fracture Fixation* 192 Basic High Flex Total Knee Replacement System * • Total Condylar Posterior Stabilized ( Ps ) / Cruciate Retaining ( Cr ) Design Anatomic Femoral Component Of Various Sizes And Having Design To Accommodate High Flexion, Can Accept Different Sizes And Thickness Of Fixed Bearing Inserts. • Fixed Bearing Cemented Tibial Tray In Various Sizes, Can Accept Different Sizes Of Fixed Bearing Inserts Of Various Sizes & Thickness. • Fixed Bearing Ps / Cr Polyethylene Insert In Different Sizes & Thickness Compatible With Various Sizes Of Fixed Bearing Tibial Tray.• Patella With Pegs Made Of Polyethylene Available In Various Sizes. • High Viscosity Antibiotic Loaded Bonecement 40 Gm. 193 High Flex Total Knee Replacement System With Attachment Of One Tibal Wedge And One Tibial Intramedullary Extension Rod Assembly * • Total Knee Replacement System, Posterior Stabilized ( Ps ) , Design Femoral Component Of Various Sizes And Having Design To Accommodate High Flexion, Can Accept Different Sizes And Thickness Of Fixed Bearing Inserts. • Fixed Bearing Cemented Tibial Tray In Various Sizes With Attachment Of One Tibial Wedge And One Tibial Intramedullary Extension Rod Assembly, Can Accept Different Sizes And Thickness Of Fixed Bearing Inserts. • Fixed Bearing Ps / Cr Polyethylene Insert In Different Sizes & Thickness Compatible With Various Sizes Of Fixed Bearing Tibial Tray. • Patella With Pegs Made Of Polyethylene Available In Various Sizes. • High Viscosity Antibiotic Loaded Bone Cement 40 Gm. 194 Shoulder Hemireplacement Prosthesis ( Modular ) * • Cemented Humeral Stem With Provision Of Attachment Of Tuberosities In Different Sizes • Humeral Head Component ( Different Sizes ) • 1 Pack Bone Cement 195 Total Shoulder Arthroplasty Set* Glenoid Component: Uhmwpe Make Of Different Sizes With Option For Anchor Pegged & Keeled Glenoid Humeral Component: Different Size And Length, Porous Coated For Uncemented Implantation Humeral Head: Different Size With Option For Eccentric Head Height • 1 Pack Bone Cement 196 Total Elbow Replacement* Including Humeral And Ulnar Component With 1 Pack Bone Cement ( 40Gm ) . 197 Radial Head Prosthesis ( Metallic / Noncemented ) * 198 Cemented Unicondylar Knee Implant Set* ( Anatomical Side Specific Design ) Comprising Femoral Component, Tibial Tray And Uhdpe Tibial Articular Surface With One Pack Of Bone Cement High Viscosity Antibiotic Loaded Bone Cement 40 Gm. 199 Modular Resection Prosthesis For Lower Limb*- Proximal Femur / Distal Femur / Proximal Tibia / Total Femur High Viscosity Antibiotic Loaded Bone Cement 40 Gm. 200 Modular Resection Prosthesis For Upper Limb*- Proximal Humerus / Distal Humerus / Total Humerus High Viscosity Antibiotic Loaded Bone Cement 40 Gm. 201 Sterile Disposable Covers For Image Intensifier ( 2 Pieces In One Pack ) 202 Negative Pressure Wound Therapy With Disposables Including Small / Medium / Large Dressing With Tubing, Drape, Y Connector, Bacterial Filter And Canister. Each Set Consists Of Dressing, Drape Tubing / Bacterial Filter And Canister 203 Monopolar Handle With Tips For Cutting And Coagulation ( Compatible With L & T 3 Pin Digital 400 And Martin Me400 ) 204 Sterile Cling Drape 205 Disposable O Drape For Knee Surgery ( Size 130 Cm X 200 Cm ) 206 Disposable U Drape For Hip Surgery ( Size 130 Cm X 200 Cm ) 207 Gamma Sterilized Lodophorimpregnated Polyester Drape 34 Cms X 35 Cms 208 Orthopaedic Gloves With Following Specifications- Atleast 0.330Mm Thick For Increased Protection, Textured Surface For Better Grip, Ease Of Donning, Dull Colour To Reduce Glare, Great Flexibility And Elasticity, Latex, Powder Free Polymer Coated Inner Surface ( Sizes 7, 7.5, 8 ) 209 Radiation Proctection Gloves ( Sterile ) , Lead Equivalence Value 0.10 To 0.20 Mm, Textured Surface For Better Grip, Ease Of Donning In Sizes 7 / 7.5 / 8 210 Disposable Impervious Surgical Gowns With Back Flap Completely Covering The Back Of The Surgeon ( Medium / Large / Extra Large Size ) 211 Blade For Humbys Knife, Sterile 158Mm Stainless Steel 212 X Ray Protective Lead Aprons: Protective Apparel That Is Ergonomically Designed And Lightweight, Making It Comfortable To Wear For Long Durations. Protection For The Upper Body And The Sensitive Thyroid Gland At A Lead Equivalence Of 0.5 Mm Pb. Basic Back Protection Required For Ct Scans And Cath Labs At A Lead Equivalence Of 0.25 Mm Pb. Apparel Should Comply With The Strict Norms Under Eu Directives 89 / 686 / Eec And 93 / 42 / Eec. 213 Skin Marking Pen, Sterile, Disposable, Thin Tip 214 Disposable Skin Stapler 215 Esmarch Bandage 6” 216 Esmarch Bandage 4” 217 Bone Wax 218 Gigli Saw 219 Disposable Gamma Irradiated Gown Set – Each Containing 5 Gowns, 4 Large Drapes And Stockinette Each 220 Disposable Gamma Irradiated , Impervious Kit Of Drapes For Hip And Knee Surgery ( Replacement ) Containing ( Sterile Stockinette, O Drapes / U Drape, Screen Cover, Polydrape Sheet, Drape Sheet 1 X 1Metre ) 221 Osteoconductive And Resorbable Injectable Prefilled Hydroxyapatite Bone Graft Paste ( 5 Ml ) With Injector Kit* 222 Osteoconductive Cortical Synthetic Resorbable Bone Granules ( 5 Cc ) With Minimum Compression Strength Of 200Mpa* 223 Antibiotic Impregnated ( Gentamicin ) Collagen Implants ( All Sizes ) * 224 Gentamicin Impregnated Sterilized Cement Beads ( Chain Of 10 Beads ) * 225 Ultrasound Gel For Physiotherapy Use 226 Output Cables For Swd Of Existing Machine ( Of Make India Medico Instruments, Short Wave Diathermy 500 Watts ) 227 Pads For Swd Of Existing Machines ( Of Make India Medico Instruments, Short Wave Diathermy 500 Watts ) 228 Flexible Rubber Electrode For Tens ( 6 X 8 ) Pf Existing Machine ( Of Make Meditek Electronics Microprocessor Based 4 Channel Automode Tens ) 229 Nylon 3-0 230 Nylon 4-0 231 Fibrin Glue / Sealant 2 Ml 232 Silicon Tendon Rod ( Hunter ) 3Mm 233 Silicon Tendon Rod ( Hunter ) 4Mm 234 Sterile Kit For Bone Marrow Aspirate Cencentrate ( Bmac ) Generation* 235 Sterile Kit For Platlet Rich Plasma ( Prp ) Generation* 236 Sterile Demineralized Bone Matrix 1 Cc Pack* 237 Self Seal Sterilization Pouch; For Steam, Chemical Vapour And Eo Sterilization With Sterilization Indicator; Size 12 Inch X 15 Inch 238 Self Seal Sterilization Pouch; For Steam, Chemical Vapour And Eo Sterilization With Sterilization Indicator; Size 6-7 Inch X 10-11 Inch 239 Self Seal Sterilization Pouch; For Steam, Chemical Vapour And Eo Sterilization With Sterilization Indicator; Size 4 Inch X 10 Inch 240 Knotless Absorbable Barbed Pds Suture No. 1.0 On Needle 241 Knotless Absorbable Barbed Monocryl Suture No 1.0 On Needle 242 Non Cemented Total Hip System ( Large Head Metal On Poly ) * • Non Cemented Ha / Porous Coated Stem Having Various Sizes, Can Accept Multiple Offsets Of Metal Heads ( Small / Medium / Large / Extra Large ) With Diameter Of 32 / 36Mm • Metal Heads ( Made Of Alloy Co+Cr+Mo ) Having Variable Offset ( Small / Medium / Large / Extra Large ) With Diameter Of 32 / 36 Mm Compatible With The Stem. • Non Cemented Porous Coated Acetabular Cup Made Of Titanium Alloy Available In Various Sizes, With Locking Mechanism To Accept Polyethylene Liner Of Various Sizes & Diameter ( 32 / 36 Mm ) , Must Have Holes In Dome Area For Screw Fixation. • The Polyethylene Liner Should Be Highly Cross-Linked With Various Diameter & Sizes Compatible With Acetabular Cup & Can Accept Various Metal Heads. • 3 Cancellous Screws Made Of Titanium To Fix The Cup Into The Acetabulam. 243 Radiofrequency Ablator Probe For Arthroscopy Of Knee And Shoulder; Bipolar Multielectrode Type, Should Produce Plasma Temperature Between 40-700C, With Finger Switch And Foot Control Both, With Suction Capability, And Of Tip Angle 90 / 500. Should Be Reusable If Required. ( Compatible With Existing System ) 244 Radiofrequency Ablator Probe For Arthroscopy Of Small Joints; Bipolar Multielectrode Type, Should Produce Plasma Temperature Between 40-700C, With Finger Switch And Foot Control Both, With Suction Capability, And Of Tip Angle 30-400 And Of Diameter 1.4 Mm. Should Be Reusable If Required. . ( Compatible With Existing System ) 245 Radiofrequency Ablator Probe For Arthroscopy Of Small Joints; Bipolar Multielectrode Type, Should Produce Plasma Temperature Between 40-700C, With Finger Switch And Foot Control Both, With Suction Capability, And Of Tip Angle 30-400 And Of Diameter 2-2.5 Mm. Should Be Reusable If Required. . ( Compatible With Existing System ) 246 Radiofrequency Hooked Dissection Probe For Arthroscopy Use, Bipolar Type, Plasma Producing, 20 / 300 Angled For Cutting And Coagulation. Should Be Reusable If Required. . ( Compatible With Existing System ) 247 Single Use Pocket Size Negative Pressure Wound Therapy System With 2 Lithium Batteries And 2 Sterile Dressing And 10 Fixation Strips Without Any Canister : Sizes- 10 X 20Cms* 248 Single Use Pocket Size Negative Pressure Wound Therapy System With 2 Lithium Batteries And 2 Sterile Dressing And 10 Fixation Strips Without Any Canister : Sizes- 15X 30Cms* 249 Tulle Gras Paraffin Gauz Medicated Dressing With Leano Weave Technology.Size-10X10 Cm 250 Distal Tibial Metaphyseal Plate 5 To 7 Holes With 7 Locking Screws And 2 Cortical Screws ( Stainless Steel ) * 251 Distal Tibial Metaphyseal Plate 5 To 7 Holes With 7 Locking Screws And 2 Cortical Screws ( Titanium ) * 252 Radial Styloid Anatomical Locking Plates 2.4 / 2.7 Mm, 4 To 6 Holes With 4 Locking Screws And 2 Cortical Screws ( Star Headed Screws ) ( Titanium ) 253 Titanium Facet Hooks / Laminar Hooks / Transverse Process Hooks With Various Off- Sets- Small And Large * 254 Titanium Top Loading Pedicle Screw Set Percutaneous Cannulated ( 5.5Mm / 6.5Mm ) Diameter 4 Polyaxial Screws With 2 Rods ) Misc Sizes * 255 Silicon Cannula With Diameter Of 6 / 8 / 10 Mm With Length Of 2 To 5 Cm ( In All Sizes ) 256 Sterile Camera Cover 257 Laminoplasty Spacer Peek With 2 Screws Misc Sizes * 258 Absorbable Haemostat ( Oxidized Regenerated Cellulose ) , Sterile 1.25 X 5Cm 259 Hemostatic Matrix Plus Flex Tip ( Flowable Haemostat ) * 260 Non- Suture Self Adhesive Artificial Dural Membrane ( Small / Medium Size ) 261 Ethibond No. 2.0 On Needle Or Similar Poly-Ethylene Terepthalate, Braided Non-Absorbable Suture 262 Knotless Absorbable Barbed Monocryl Suture No 1.0 On Needle 263 Valgus Osteotomy Plates For Proximal Femur ( Titanium ) 264 All Inside Meniscal Repair Devise For Meniscal Tear Either Longitudinal Or Radial. The Devise Is Very Ergonomically And Single Hand Devise. This Devise Consist Of Two Peek Implants With Pre-Tied Knot. Two Peek Implants With #2-0 Suture In It Which Needs To Tension In Last And Cut It. 265 All-Suture Cerclage Using Fibertape With A Pre-Tied Racking Hitch Knot 266 Gentamycin Sponge ( Like Abgel Or With Similar Specification ) 267 Mid Foot Plating Set With Mtp Plates, Tmt Plates, Osteotomy Plates 2.7Mm With Instrumentation ( Titanium ) 268 Disposable Needle For Shoulder Suture Passer- 269 Disposable Needle For Knee Suture Passer 270 Bmac ( Bone Marrow Aspiration Centrifuge ) System:- Bmac System To Treat Avn, Non-Union, Mal Union And Fracture Fixation For Operating Room With Following System: Sterile Bmc Kit To Be Used In Angel System With Bone Marrow Needs To Take Out Bone Marrow From Pics, Calcaneal & Bmc Kit To Separate Out Bmac / Ppp / Wbc. Bmac To Be Used In Avn, Non-Union Cases. • Centrifuge System With Inbuilt Process Based Timer Sensor • Bone Marrow Needle - 50 ( Fifty Sets Of Consumables ) • Bmac Kit ( Sterile Item ) • Anticoagulant Acd-A, 4 Ml ( Sterile Item ) 271 Prp- Prp System To Treat Chondromalacia, Traumatic Cartilage Damage, Post-Op Fracture Re-Fixation, Tendinitis & For Day Surgery Clinic & Operating Room With Following System: Sterile Syringe To Be Used In Prp System With Outer Syringe To Take Out Blood & Inner Syringe To Separate Out Prp To Be Used In Cartilage Defect / Tendinitis / Rotator Cuff Tear. • Centrifuge System With 1500 Rpm Approx. • Bucket With Screw Cap ( 50 Consumables Sets ) • Counterweight For The Centrifugation Of Prp • Anticoagulant Acd-A, 4 Ml ( Sterile Item ) • Prp Syringe ( Sterile Item ) 272 Saw Blade For Tjr Surgery Length 81 To 116 Mm, Usable L 60-95 Mm W-12.5-25Mm ( Compatible With Existing Stryker System ) 273 Saw Blade For General Traumatology Length 46 To 90 Mm L 25-69Mm W-10-50Mm ( Compatible With Existing Stryker System ) 274 Drill Bit With Diameter 2.5Mm & Length 110 / 85Mm For Quick Coupling 275 Drill Bit With Diameter 3.5Mm & Length 110 / 85Mm, For Quick Coupling 276 Drill Bit Cannulated With Length 300 / 250 277 Guide Wire Ø2.8 With Thread-Tip With Trocar Of Length 30Mm 278 Cannulated Drill Bit 1.5 L110 / 85 279 Cannulated Drill Bit 3.2 / 1.75 Cann L170 / 140 280 Schanz Screw 6.0 Mm, Length 190 / 50 Mm, Stainless Steel 281 Drill Bit With Diameter 3.2Mm, Length 145 / 120Mm For Quick Coupling X10, Diameter 4.5Mm, Length 147 / 120Mm For Quick Coupling 282 Drill Bit With Diameter 4.3Mm, Length 221Mm 283 Drill Bit With Diameter 3.5Mm For Metal 284 Drill Bits Dia 0.8Mm, 1Mm, 1.1Mm, 1.3Mm & 1.5Mm, 1.8Mm, 2Mm, 2.4Mm 285 Cannulated Drill Bits For 4 Mm 6.5Mm And 7Mm Ccs 286 Guide Wires For 4 Mm 6.5Mm And 7Mm Ccs 287 Coated Polyester On Needle 2-0 Suture ( Ethibond Type ) 288 Double Endobutton Compression Device ( Syndesmotic Tightrope Type ) 289 Suture Button All Sizes 290 Suture Disc All Sizes 291 Spiked Washer All Sizes 292 Uncemented Conical Revision Hip Stem 190-305Mm ( Wagner Type ) With Instrumentation 293 Cemented Revision Hip Stem With Instrumentation 294 Trabecular Metal Hip Cup For Revision Hip Arthroplasty With Instrumentation And Screws 295 Highly Porous Coated Thr Cup With Instrumentation And Screws 296 Revision Hip Cage All Sizes With Instrumentation And Screws And Bone Cement 20G 297 Revision Hip Augments With Instrumentation With Bone Cement 20G And Screws 298 Titanium Interference Screw 6Mm To 11Mm Length 23Mm And 28Mm With Instrumentation 299 Beath Pin 3 / 32 ( 2.4Mm ) Diameter, 10 ( 254Mm ) Length 300 Beath Pin 3 / 32 ( 2.4Mm ) Diameter, 3” ( Small ) Length 301 6.0 Mm Threaded Sacral Bar Kits Sacral Bar Set, Bar Length 200 Mm, Sterile Or Sacral Bar Set, Bar Length 260 Mm, Sterile ) . Bolt Cutters Capable Of Cutting A 6.0 Mm Barrod Cutter 302 Drill Bit 4.5 Mm, Length 195 / 170 Mm, 2- Ute, For Quick Coupling 303 Drill Bit 4.5 Mm, Length 180 / 165 Mm, 2- Ute, For Jacobs Chuck 304 Drill Bit 3.2 Mm, Calibrated, Length 230 / 205 Mm, 3- Ute, For Quick Coupling 305 Drill Bit 3.2 Mm, Length 180 / 165 Mm, 2- Flute, For Jacobs Chuck 306 6.5 Mm Cannulated Screws, 16 Mm Thread Length – 30 Mm–150 Mm Lengths In 5 Mm Increments & – 160 Mm–180 Mm Lengths In 10 Mm Increments – 316L Stainless Steel And Titanium Alloy 307 6.5 Mm Cannulated Screws, 32 Mm Thread Length – 45 Mm–150 Mm Lengths In 5 Mm Increments – 160 Mm–180 Mm Lengths In 10 Mm Increments – 316L Stainless Steel And Titanium Alloy 308 6.5 Mm Solid Cancellous Screws, Fully Threaded – 20 Mm–130 Mm Lengths In 5 Mm Increments – 140 Mm–180 Mm Lengths In 10 Mm Increments – 316L Stainless Steel And Titanium Alloy 309 6.5 Mm Cannulated Screws, Fully Threaded – 20 Mm–130 Mm Lengths In 5 Mm Increments – 140 Mm–180 Mm Lengths In 10 Mm Increments – 316L Stainless Steel And Titanium Alloy 310 7.3 Mm Cannulated Screws, 16 Mm Thread Length – 30 Mm–150 Mm Lengths In 5 Mm Increments – 160 Mm–180 Mm Lengths In 10 Mm Increments – 316L Stainless Steel And Titanium Alloy 311 7.3 Mm Cannulated Screws, 32 Mm Thread Length – 45 Mm–150 Mm Lengths In 5 Mm Increments – 160 Mm–180 Mm Lengths In 10 Mm Increments – 316L Stainless Steel And Titanium Alloy 312 7.3 Mm Cannulated Screws, Fully Threaded – 20 Mm–130 Mm Lengths In 5 Mm Increments – 140 Mm–180 Mm Lengths In 10 Mm Increments – 316L Stainless Steel And Titanium Alloy 313 Washer, 13.0 Mm – 316L Stainless Steel And Titanium 314 Disposable Bone Cement Vacuum Mixing Kit With Mixing Bowl With 400 Ml Capacity, Vacuum Suction Tube With Filter To Reduce Odors, Suction Adapter And Scraper With Spatula 315 Uncemented Bipolar Hip System ( All Sizes ) 316 Chinese Finger Trap For Wrist Arthroscopy 317 Lead / Aluminum Hand Holder For Finger / Hand Surgery 318 Bohler’S Stirrup 319 Buck’S Pulley 320 Nylon Traction Cord 321 Traction Weight In Increments Of Two Kg ( At Least Five In One Unit ) 322 Skin Stapler Remover 323 Titanium Hagh Tibial Osteotomy Plates ( Medial With Its Screw Per Plate ) , ( Tomofix Type ) 324 Low Viscocity Pmma Bone Cement 20 Mg* 325 Low Viscocity Pmma Bone Cement 40 Mg* 326 Antibiotic ( Gentamycin ) Impregnated Pmma Bone Cement 40 Mg* 327 Suture Disc All Sizes 328 Suture Button All Sizes 329 Spiked Washer All Sizes 330 Post Screw For Graft Fixations All Sizes 331 Spiked Screw For Ligament All Sizes 332 Tenodesis Screw ( Titanium ) All Sizes 333 Tendon Graft Harvester Closed 334 Tendon Graft Harvester Open 335 Screw Driver 3.5 Mm Solid With Wooden Handle, With Hexagonal Tip 336 Screw Driver 4.5 Mm Solid With Wooden Handle, With Hexagonal Tip 337 Screw Driver For 4 Mm Ccs Cannulated With Wooden Handle, With Hexagonal Tip 338 Screw Driver For 6.5 Mm Ccs Cannulated With Wooden Handle, With Hexagonal Tip 339 Screw Driver Long With Head Holding Attachments 3.5 Mm Solid With Wooden Handle ( Approximate Length 250 Mm ) , With Hexagonal Tip

Refer document

INR 20000.0 /-

INR 2.20 Crore /-

Name of Work: Supply of Consumable and Non Consumable Items for Orthopedics
	Sl. No.	Item Description	Item Code / Make	Approx Quantity Required	Accounting Units
1	1	Heading
2	1.01	Schanz screw 2.5/3.0 mm	item1	250	Per Unit
3	1.02	Schanz screw 3.5/4.5 mm (thread sizes 12/18 mm)	item2	250	Per Unit
4	1.03	Schanz screw 5.0/5.5 mm (cortical and cancellous) (thread size 12/18/32 mm)	item3	250	Per Unit
5	1.04	Denham’s pin 4.5/ 5.0 mm	item4	50	Per Unit
6	1.05	Steinman pin 3.0/3.5 mm	item5	250	Per Unit
7	1.06	Steinman pin 4.5/5.0 mm	item6	250	Per Unit
8	1.07	Universal external fixator clamp	item7	100	Per Unit
9	1.08	Tube to tube clamps	item8	100	Per Unit
10	1.09	Tubular rods –4’’, 6’’, 8”	item9	100	Per Unit
11	1.1	Tubular rods –10, 12, 14”	item10	100	Per Unit
12	1.11	Forearm fixator clamps for 2.5mm pins	item11	100	Per Unit
13	1.12	Forearm fixator clamps for 3.5mm pins	item12	100	Per Unit
14	1.13	Forearm fixator connecting rods – all sizes	item13	100	Per Unit
15	1.14	Forearm fixator radio lucent carbon connecting roads all sizes	item14	100	Per Unit
16	1.15	Spanners (size 6/7, 8/9 ,10/11)	item15	10	Per Unit
17	1.16	Box Spanner (8/9/10/11)	item16	10	Per Unit
18	1.17	Ring fixator set: one set consists of eight half rings stainless steel (120 to 220 MM), eight 1.8 mm K wires (Bayonet and trocar tip), 12 threaded rods (4 to 10”), 16 slotted nuts (centric/ eccentric/ schanz screw holding), 8 ring connecting bolts, 4 washers, 80 nuts, 2 spanners size 10.	item17	5	Per Unit
19	1.18	Ring fixator set: one set consists of eight carbon fiber half rings (120 to 220 MM), eight 1.8 mm K wires (Bayonet and trocar tip), 12 threaded rods (4 to 10”), 16 slotted nuts (centric/ eccentric/ schanz screw holding), 8 ring connecting bolts, 20 washers, 80 nuts, 2 spanners size 10	item18	5	Per Unit
20	1.19	K wires 1.8mm for Illizarov	item19	50	Per Unit
21	1.2	Threaded rods – 4”, 6”	item20	50	Per Unit
22	1.21	Threaded rods –8”, 10”	item21	50	Per Unit
23	1.22	Threaded rods –12”	item22	50	Per Unit
24	1.23	Twisted plate (misc sizes)	item23	50	Per Unit
25	1.24	Straight plate (misc sizes)	item24	50	Per Unit
26	1.25	Male posts (1 to 5 hole)	item25	50	Per Unit
27	1.26	Female posts (1 to 5 hole)	item26	50	Per Unit
28	1.27	Hexagonal socket (misc length)	item27	50	Per Unit
29	1.28	Telescopic rods	item28	50	Per Unit
30	1.29	Concavo- convex washers	item29	50	Per Unit
31	1.3	Hinges for Illizarov ring	item30	50	Per Unit
32	1.31	Complete set of JESS assembly (medium/ large) for CTEV (comprises of 30 Link joints , 4 L rods , 2 Z rods , 4 Distractors, 2 Large connecting rods, 6 straight connecting rods and 2 Allens key etc.)	item31	5	Per Unit
33	1.32	Distractor- small, with 4 Shanz screws, 1.5/ 2.5 mm, with one Allen key. Unilateral distracter with clamps for two pins proximal and two distal, suitable for application on fingers	item32	10	Per Unit
34	1.33	Distractor- medium, with 4 Shanz screws, 2.5/ 3.5 mm, with one Allen key. Unilateral distracter with clamps for two pins proximal and two distal, suitable for application on wrist	item33	10	Per Unit
35	1.34	Distractor- large, with 4 Shanz screws, 3.5 mm, with one Allen key. Unilateral distracter with clamps for two pins proximal and two distal, suitable for application on forearm and ankle	item34	10	Per Unit
36	1.35	Radio lucent Forearm distractors with 4 shanz screws, 3.5 mm, with one Allen key. Unilateral distracter with clamps for two pins proximal and two distal, suitable for application on forearm	item35	10	Per Unit
37	1.36	Monoaxial external fixation device set with provision of bone transport. One set comprising of one mono rail, three clamps (central clamp/ end clamp/ swivel clamp), two Compression Distraction unit (misc sizes), Allen key, Six tapered schanz screws, 6.0 to 6.5 mm diameter (Limb Reconstruction System)*	item36	5	Per Unit
38	1.37	Monoaxial external fixation device set with provision of bone transport. One set comprising of one mono rail, three clamps (central clamp/ end clamp/ swivel clamp), two Compression Distraction unit (misc sizes), Allen key, Six tapered schanz screws, 6.0 to 6.5 mm diameter (Limb Reconstruction System)* (for upper limb)	item37	5	Per Unit
39	1.38	K nail sizes 8-14mm, length 32-44cm	item38	25	Per Unit
40	1.39	Radius intramedullary nails 2-4mm diameter, 22-32 cm length	item39	25	Per Unit
41	1.4	Ulna intramedullary nails 2-4mm diameter, 22-32 cm length	item40	25	Per Unit
42	1.41	3.5mm reconstruction plates (locking and non-locking) 5-12 holes with nine 3.5mm screws (stainless steel)	item41	25	Per Unit
43	1.42	3.5mm reconstruction plates (locking and non-locking) 5-12 holes with nine 3.5mm screws (titanium)	item42	25	Per Unit
44	1.43	3.5mm Low Contact DCP 6-12 holes with nine 3.5 mm cortical screws (12 to 24 mm) (stainless steel)	item43	25	Per Unit
45	1.44	3.5mm Low Contact DCP 6-12 holes with nine 3.5 mm cortical screws (12 to 24 mm) (titanium)	item44	25	Per Unit
46	1.45	1/3 tubular plates 6-8 holes with eight 3.5.mm cortical screws (12 to 24 mm) (stainless steel)	item45	25	Per Unit
47	1.46	1/3 tubular plates 6-8 holes with eight 3.5.mm cortical screws (12 to 24 mm) (titanium)	item46	25	Per Unit
48	1.47	4.5 mm Narrow DCP, low contact, 7-12 holes with nine 4.5mm screws (14-28mm length) (stainless steel)	item47	25	Per Unit
49	1.48	4.5 mm Narrow DCP, low contact, 7-12 holes with nine 4.5mm screws (14-28mm length) (titanium)	item48	25	Per Unit
50	1.49	4.5mm Narrow low contact Locking Compression Plate 6-12 holes with eight locking screws and four non locking screws (stainless steel) (14-28mm length) (stainless steel)	item49	25	Per Unit
51	1.5	Narrow low contact Locking Compression Plate 6-12 holes with eight locking screws and four non locking screws (stainless steel) (14-28mm length) (titanium)	item50	25	Per Unit
52	1.51	4.5 mm Broad low contact Locking Compression Plate, 6-18 holes with nine 4.5mm screws (14-28mm length) (stainless steel)	item51	5	Per Unit
53	1.52	4.5 mm Broad low contact Locking Compression Plate, 6-18 holes with nine 4.5mm screws (14-28mm length) (titanium)	item52	5	Per Unit
54	1.53	2.7 mm SFS DCP, 5 to 8 holes with eight 2.7 mm screws (length 10 – 20 mm ) (stainless steel)	item53	5	Per Unit
55	1.54	2.7 mm SFS DCP, 5 to 8 holes with eight 2.7 mm screws (length 10 – 20 mm ) (titanium)	item54	5	Per Unit
56	1.55	Pelvis reconstruction plates, prebent all sizes (Instrumentation to be provided free of charges during the surgeries), with ten screws, SS*	item55	25	Per Unit
57	1.56	Pelvis reconstruction plates, prebent all sizes (Instrumentation to be provided free of charges during the surgeries), with ten screws, titanium*	item56	25	Per Unit
58	1.57	4.0mm cannulated cancellous screw, partially threaded with guide wire and washer ,(length30-60mm), various thread lengths (stainless steel)	item57	500	Per Unit
59	1.58	4.0mm cannulated cancellous screw, partially threaded with guide wire and washer ,(length30-60mm), various thread lengths (titanium)	item58	500	Per Unit
60	1.59	6.5mm partially threaded cancellous screw with washer (length 35-110mm, thread lengths 12mm/ 16mm/ 32mm) (stainless steel)	item59	100	Per Unit
61	1.6	6.5mm partially threaded cancellous screw with washer (length 35-110mm, thread lengths 12mm/ 16mm/ 32mm) (titanium)	item60	100	Per Unit
62	1.61	7.0mm cannulated cancellous screw, partially threaded with guided wire and washer (length 65 to 110mm, thread lengths 12mm/16mm/32mm)* (stainless steel)	item61	100	Per Unit
63	1.62	7.0mm cannulated cancellous screw, partially threaded with guided wire and washer (length 65 to 110mm, thread lengths 12mm/16mm/32mm)* (titanium)	item62	100	Per Unit
64	1.63	washer for screws sizes 4 mm ,4.5 mm, 6.5 mm ,7 mm (stainless steel)	item63	100	Per Unit
65	1.64	washer for screws sizes 4 mm ,4.5 mm, 6.5 mm ,7 mm (titanium)	item64	100	Per Unit
66	1.65	Mini fragment plates (1.5/ 2.0/ 2.4 mm) *, locking (all sizes, different shapes) and corresponding screws (screw heads star head and low profile). One set comprises of one plate and 6 screws. Titanium make.	item65	10	Per Unit
67	1.66	Proximal tibial lateral anatomical locking plate 5 to 11 holes with nine 4.5 mm locking screws and two 4.5mm cortical screws. (Stainless steel )	item66	25	Per Unit
68	1.67	Proximal tibial lateral anatomical locking plate 5 to 11 holes with nine 3.5 mm locking screws and four 3.5 mm cortical screws; should have atleast 4 screws in periarticular region. ( Titanium )	item67	25	Per Unit
69	1.68	Proximal tibial medial anatomical locking plate 5 to 11 holes with nine 3.5mm locking screws and six 3.5 mm cortical screws, atleast 3 screws in periarticular region (Titanium)	item68	10	Per Unit
70	1.69	Distal tibial medial anatomical locking plate 5 to 11 holes with 9 locking screws and six cortical screws (Stainless steel)	item69	25	Per Unit
71	1.7	Distal tibial medial anatomical locking plate 5 to 11 holes with 9 locking screws and six cortical screws (titanium)	item70	25	Per Unit
72	1.71	Distal Tibial metaphyseal plate 5 to 11 holes with 9 locking screws and 4 cortical screws (stainless steel)*	item71	10	Per Unit
73	1.72	Distal Tibial metaphyseal plate 5 to 11 holes with 9 locking screws and 4 cortical screws (Titanium)*	item72	10	Per Unit
74	1.73	Distal tibial anterolateral anatomical locking plate 5 to 11 holes with 9 locking screws and four cortical screws, atleast 4 screw in periarticular region (Stainless steel)	item73	10	Per Unit
75	1.74	Distal tibial anterolateral anatomical locking plate 5 to 11 holes with 9 locking screws and four cortical screws, atleast 4 screw in periarticular region (titanium)	item74	10	Per Unit
76	1.75	Distal radius dorsal anatomical locking plates 2.4/2.7 mm, T and L shape, 4 to 6 holes with 4 locking screws and 2 cortical screws (star headed screws)(Titanium)	item75	10	Per Unit
77	1.76	Radial styloid anatomical locking plates 2.4/2.7 mm, 4 to 6 holes with 4 locking screws and 2 cortical screws (star headed screws)(Titanium)	item76	5	Per Unit
78	1.77	Radial Head anatomical locking plates with screws (titanium)	item77	5	Per Unit
79	1.78	Proximal radius anatomical locking plates for fixation of radial head and neck fractures, 2.4/2.7 mm, 4 to 6 holes with 4 locking screws and 2 cortical screws (star headed screws)(Titanium)	item78	5	Per Unit
80	1.79	Distal femur lateral anatomical locking plate, 6 to 12 holes on the shaft, with 10 locking screws and six 4.5mm cortical screws. (Stainless steel)	item79	20	Per Unit
81	1.8	Distal femur medial anatomical locking plate, 6 to 12 holes on the shaft, with 10 locking screws and six 4.5mm cortical screws. (titanium)	item80	20	Per Unit
82	1.81	Patellar locking plate, low profile anatomical with 2.7 and 3.5 mm locking screws (titanium) (Instrumentation to be provided free of charges during surgeries)*	item81	10	Per Unit
83	1.82	Distal humerus anatomical locking plate set (two plates – one medial and one lateral, with 6 locking screws and 6 cortical screws), 4 to 8 holes on the shaft of the plate. (Stainless steel )	item82	20	Per Unit
84	1.83	Distal humerus anatomical metaphyseal locking plate suitable for fixation of metaphyseal fractures of the distal humerus with 6 locking screws and 6 cortical screws, 6 to 14 holes. (Stainless steel )	item83	20	Per Unit
85	1.84	Distal humerus anatomical metaphyseal locking plate suitable for fixation of metaphyseal fractures of the distal humerus with 6 locking screws and 6 cortical screws, 6 to 14 holes. ( titanium)	item84	20	Per Unit
86	1.85	Proximal ulna anatomical locking plate suitable for fixation of proximal ulna fractures with 8 locking screws and 8 cortical screws, 4 to 8 screws on the shaft. (Stainless steel)	item85	10	Per Unit
87	1.86	Proximal ulna anatomical locking plate suitable for fixation of proximal ulna fractures with 8 locking screws and 8 cortical screws, 4 to 8 screws on the shaft. (titanium)	item86	10	Per Unit
88	1.87	Proximal femoral anatomical locking plate suitable for fixation of proximal femur fractures with 8 locking screws and 8 cortical screws (stainless steel)	item87	10	Per Unit
89	1.88	Proximal femoral anatomical locking plate suitable for fixation of proximal femur fractures with 8 locking screws and 8 cortical screws (titanium)	item88	10	Per Unit
90	1.89	Proximal femoral plate for periprosthetic fractures with 8 locking screws and 8 cortical screws (stainless steel)	item89	10	Per Unit
91	1.9	Proximal femoral plate for periprosthetic fractures with 8 locking screws and 8 cortical screws (titanium)	item90	10	Per Unit
92	1.91	Anatomical locking plate for wrist arthrodesis, suitable for fixation of wrist arthrodesis with or without proximal row carpectomy, 2.4/ 2.7 mm distal screw size. With 3 proximal and 3 distal screws (Titanium)	item91	5	Per Unit
93	1.92	Anatomical locking lateral end clavicle plate with 2.7 and 3.5 mm locking screws. Set comprising of one plate, four 2.7 and three 3.5 mm locking screws (Stainless steel )	item92	10	Per Unit
94	1.93	Titanium Proximal medial tibial osteotomy locking plate for HTO with hydroxyapatite wedges 7.0/ 9.0/ 11.0 mm *	item93	10	Per Unit
95	1.94	Coventary staples Titanium/ U staples, Misc sizes	item94	20	Per Unit
96	1.95	1.5 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *	item95	30	Per Unit
97	1.96	2.0 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *	item96	30	Per Unit
98	1.97	2.4 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *	item97	30	Per Unit
99	1.98	Proximal femoral nail – 34 to 44 cm length, 9 to 12 mm diameter, with two proximal and two distal locking bolts. (Instrumentation to be provided free of charges during the surgery) (stainless Steel )	item98	20	Per Unit
100	1.99	Proximal femoral nail – 34 to 44 cm length, 9 to 12 mm diameter, with two proximal and two distal locking bolts. (Instrumentation to be provided free of charges during the surgery) (titanium)*	item99	20	Per Unit
101	2	Proximal femoral nail with single screw/ blade/ functional single screw to provide rotational stability to the neck. Sizes: small to long.One set comprises of one nail plus functional screw/ blade, end cap, and two distal locking bolts (titanium)*	item100	20	Per Unit
102	2.01	Interlocking nails for Femur with 2 proximal and 2 distal locking screws (nail diameter 9- 12mm, length 36-44mm) (stainless Steel )	item101	25	Per Unit
103	2.02	Interlocking nails for Tibia with 2 proximal and 2 distal locking screws (nail diameter 8- 10mm, length 26-34mm) (stainless Steel )	item102	25	Per Unit
104	2.03	Tibial nail (Expert type) for proximal and distal metaphyseal fractures with 6 locking bolts, misc sizes (stainless Steel)	item103	10	Per Unit
105	2.04	Distal femoral nail with two proximal and three distal locking screws, antero-posterior curve to accommodate the curve of femur (nail diameter 9-12mm, length options in increment of 2 cm from approx. 26 cm-38 cm), proximal locking option preferably in antero-posterior direction (stainless Steel )	item104	10	Per Unit
106	2.05	Distal femoral nail with two proximal and three distal locking screws, antero-posterior curve to accommodate the curve of femur (nail diameter 9-12mm, length options in increment of 2 cm from approx. 26 cm-38 cm), proximal locking option preferably in antero-posterior direction (titanium)*	item105	10	Per Unit
107	2.06	Reconstruction nail for Femur with provision of trochanteric entry point, diameter 9-12mm and 36-44cm length with four bolts of assorted size	item106	10	Per Unit
108	2.07	Titanium elastic nail 2.0/2.5/3.0/3.5/4.0 mm	item107	50	Per Unit
109	2.08	DHS set consisting of one Richard screw (65- 110mm), one compression screw, one short/ long barrel plate (4-8 holes), & 4 cortical screws, misc sizes	item108	20	Per Unit
110	2.09	DCS set consisting of one Richard screw, one compression screw, one plate (4-8 holes), and five 4.5 mm cortical screws, one 6.5 mm cancellous screw	item109	10	Per Unit
111	2.1	DCS set consisting of one Richard screw, one compression screw, one plate (9- 14 holes), and six 4.5 mm cortical screws, one 6.5 mm cancellous screw	item110	10	Per Unit
112	2.11	Spool of Stainless steel malleable wire 16 to 22 G	item111	250	Per Unit
113	2.12	SS Kirschner wires 0.5/0.6 mm, diameter, 6” length, both ends sharp	item112	250	Per Unit
114	2.13	SS Kirschner wires 0.5/0.6 mm, diameter, 12” length, both ends sharp	item113	250	Per Unit
115	2.14	SS Kirschner wires 0.9mm/1.0 mm, diameter,6” length, both ends sharp	item114	250	Per Unit
116	2.15	SS Kirschner wires 0.9mm/1.0 mm, diameter,12” length, both ends sharp	item115	250	Per Unit
117	2.16	SS Kirschner wires 1.2mm/1.5mm/2mm/2.5mm/3mm diameter, 6” length, both ends sharp	item116	250	Per Unit
118	2.17	SS Kirschner wires 1.2mm/1.5mm/2mm/2.5mm/3mm diameter, 12” length, both ends sharp	item117	250	Per Unit
119	2.18	SS Kirschner wires 0.5/0.6, 0.9mm/1.0, 1.2mm/1.5mm/2mm/2.5mm/3mm, diameter 6” length, fully threaded	item118	250	Per Unit
120	2.19	SS Kirschner wires 0.5/0.6 mm, diameter, 6” length, partially threaded	item119	250	Per Unit
121	2.2	SS Kirschner wires 0.5/0.6 mm, diameter, 12” length, partially threaded	item120	250	Per Unit
122	2.21	SS Kirschner wires 0.9mm/1.0 mm, diameter,6” length, partially threaded	item121	250	Per Unit
123	2.22	SS Kirschner wires 0.9mm/1.0 mm, diameter,12” length, partially threaded	item122	250	Per Unit
124	2.23	SS Kirschner wires 1.2mm/1.5mm/2mm/2.5mm/3mm diameter, 6” length, partially threaded	item123	250	Per Unit
125	2.24	Titanium facet hooks/ laminar hooks/ transverse process hooks with various off- sets- small and large *	item124	10	Per Unit
126	2.25	Titanium top loading pedicle screw set percutaneous cannulated (5.5mm/6.5mm) diameter 4 polyaxial screws with 2 rods) misc sizes *	item125	10	Per Unit
127	2.26	Device for intervertebral assisted motion 8mm, 10mm, 12mm, 14mm *	item126	2	Per Unit
128	2.27	Titanium anterior staples 13 mm, 15mm, 17 mm	item127	5	Per Unit
129	2.28	PLIF cage PEEK 7-14 mm, foot print 22-28 mm. 1 set consists of 2 pcs *	item128	5	Per Unit
130	2.29	TLIF cage PEEK 7-14 mm, foot print small/ medium/ large. 1 set consists of 1 pc *	item129	5	Per Unit
131	2.3	Laminoplasty spacer PEEK with 2 screws misc sizes *	item130	5	Per Unit
132	2.31	Kyphoplasty kit *	item131	10	Per Unit
133	2.32	Vertebroplasty kit *	item132	10	Per Unit
134	2.33	Absorbable haemostat (oxidized regenerated cellulose), sterile 1.25 X 5cm	item133	5	Per Unit
135	2.34	Hemostatic matrix plus flex tip (flowable haemostat)*	item134	5	Per Unit
136	2.35	Non- suture self adhesive artificial dural membrane (small / medium size)	item135	5	Per Unit
137	2.36	Knuckle bender splint (small, medium & large)	item136	50	Per Unit
138	2.37	Short finger splint	item137	50	Per Unit
139	2.38	Upper limb splint, above elbow with hinge at elbow	item138	50	Per Unit
140	2.39	Dynamic finger splint for extension of proximal interphalangeal joint	item139	50	Per Unit
141	2.4	Dynamic finger splint for flexion of proximal interphalangeal joint	item140	50	Per Unit
142	2.41	Knee brace with hinge at knee with drop lock (custom- made)	item141	50	Per Unit
143	2.42	Patellar tendon bearing brace (custom- made)	item142	50	Per Unit
144	2.43	LS corset (custom- made)	item143	50	Per Unit
145	2.44	SOMI brace (different sizes)	item144	50	Per Unit
146	2.45	Halo sustem 1.-Glass composite ring for MRI compatibility 2-.Non -Conductive Ceramic Pin 3.-Assorted sizes Halo Rings 4.-Assorted sizes vest 5.-Assorted sizes ceramic pins*	item145	10	Per Unit
147	2.46	Cervical collar with Adjustable button for occipital fit, Removable Sternal pad and provision of Thoracic extension *	item146	50	Per Unit
148	2.47	Adhesive Skin Traction Kit (different sizes)	item147	50	Per Unit
149	2.48	Crepe bandage 4 inch size	item148	50	Per Unit
150	2.49	Crepe bandage 6 inch size	item149	50	Per Unit
151	2.5	Stockinette for upper limb	item150	50	Per Unit
152	2.51	Stockinette for lower limb	item151	50	Per Unit
153	2.52	Orthopaedic casting tape Made of specially knittted polyester fabric, impregnated with polyurethane resin. with water resistant cast padding , Size 10 cm X 240 Cm	item152	50	Per Unit
154	2.53	Orthopaedic casting tape Made of specially knittted polyester fabric, impregnated with polyurethane resin. with water resistant cast padding, Size 12.5 cm X 360 Cm	item153	50	Per Unit
155	2.54	Plaster of paris bandages 4” x 2.7mtr	item154	100	Per Unit
156	2.55	Plaster of paris bandages 6”x2.7 mtr.	item155	100	Per Unit
157	2.56	Head halter traction kit with spreader, rope, pulley and weight	item156	10	Per Unit
158	2.57	Floor suction disc for arthroscopy	item157	10	Per Unit
159	2.58	Sterile TUR set/ Y connector	item158	50	Per Unit
160	2.59	Silicon Cannula with diameter of 6/8/10 mm with length of 2 to 5 cm (in all sizes)	item159	10	Per Unit
161	2.6	Sterile camera cover	item160	50	Per Unit
162	2.61	Biocomposite / PEEK anchor suture of diameter 4.5 to 6 mm with double loaded no 2 fibrewire thread*	item161	10	Per Unit
163	2.62	Titanium anchor suture of diameter 2.2 to 2.8 mm with double loaded no 2 fibrewire thread*	item162	10	Per Unit
164	2.63	Titanium anchor suture of diameter 4.5 to 6 mm with double loaded no 2 fibrewire thread with needle*	item163	10	Per Unit
165	2.64	Biocomposite / PEEK anchor suture of diameter 4.5 to 6 mm with triple loaded thread*	item164	10	Per Unit
166	2.65	Knotless instability anchor with PEEK suture eye & Bio-Composite material (Biphasic Beta tricalium sulphate & PLLA ) anchor body with tap-in design for strong fixation . It should have diameter of 2.5 - 3 mm with length of 15-16 mm*	item165	10	Per Unit
167	2.66	Knotless instability anchor with PEEK suture eye & Bio-Composite material (Biphasic Beta tricalium sulphate & PLLA ) anchor body with tap-in design for strong fixation . It should have diameter of 4.5 - 4.9 mm with length of 17 - 19.5 mm*	item166	10	Per Unit
168	2.67	Endobutton : Titanium metal	item167	20	Per Unit
169	2.68	All inside meniscal repair device for meniscal tear either longitudinal or radial, in sterile pack; each unit must be able to make atleast two mattress knots and have two peek implants. Along with suture cutter if required*	item168	10	Per Unit
170	2.69	Ethibond or similar Poly-ethylene terepthalate, braided non-absorbable suture No.5 (4 sutures on needle in one pack)	item169	20	Per Unit
171	2.7	Ethibond or similar Poly-ethylene terepthalate, braided non-absorbable suture No.2 (4 sutures on needle in one pack)	item170	20	Per Unit
172	2.71	Ethibond or similar Poly-ethylene terepthalate, braided non-absorbable suture No. 2.0 on needle	item171	20	Per Unit
173	2.72	Disposable Suture passer with Lasso for shoulder arthroscopy; right and left 45 degree angled. *	item172	10	Per Unit
174	2.73	Sterile Underwater Electrosurgical device with 900 bent for use in arthroscopy with three pin connector compatible to cautery machine	item173	10	Per Unit
175	2.74	Osteochondral graft harvest and transfer set for different sizes (6 mm, 8 mm 10mm), sterile disposable*	item174	5	Per Unit
176	2.75	Disposable O drape with fluid collection bag for Knee arthroscopy (size 130 cm x 200 cm)	item175	20	Per Unit
177	2.76	Disposable O drape with fluid collection bag for Shoulder arthroscopy (size 130 cm x 200 cm)	item176	20	Per Unit
178	2.77	Glycine bottle 3 Litre size	item177	50	Per Unit
179	2.78	Normal Saline Bottle 3 Litre size	item178	50	Per Unit
180	2.79	Low Viscocity PMMA Bone Cement 20 mg*	item179	50	Per Unit
181	2.8	Low Viscocity PMMA Bone Cement 40 mg*	item180	50	Per Unit
182	2.81	Antibiotic (Gentamycin) Impregnated PMMA Bone Cement 40 mg*	item181	50	Per Unit
183	2.82	Austin Moore Prosthesis (39-53 mm size)	item182	25	Per Unit
184	2.83	Cemented Total Hip System* · Cemented tapered stem having various sizes. · Metal heads having variable offset (small/medium/large/extra large) with diameter of 28/32 mm compatible with the stem. · Cemented Cup with long posterior wall made of UHMWPE with various OD (40,43,47,50,53) having internal diameter of 28 mm. · Cement restrictor in various sizes to restrict the cement to flow distally into the femoral canal. · Centralizer to place the stem centrally into the femoral Canal. · Antibiotic loaded bone cement 40 gm - 2 packets.	item183	10	Per Unit
185	2.84	Non Cemented Total Hip System (metal on poly ) * · Non Cemented HA/POROUS coated stem having various sizes, can accept multiple offsets of metal heads (small/medium/large/extra large) with diameter of 28MM. · Metal heads (made of alloy co+cr+mo) having variable offset (small/medium/large/extra large) with diameter of 28mm compatible with the stem. · Non cemented porous coated acetabular cup made of titanium alloy available in various sizes, with locking mechanism to accept polyethylene liner of various sizes & diameter (28mm), must have holes in dome area for screw fixation.· The polyethylene liner should be highly cross-linked with various diameter & sizes compatible with acetabular cup & can accept various metal heads. · 3 Cancellous screws made of titanium to fix the cup into the acetabulam.	item184	10	Per Unit
186	2.85	Non  Cemented  Total  Hip  System  (ceramic head on poly ) * · Non Cemented HA/POROUS coated stem having various sizes, can accept multiple offsets of metal heads (small/medium/large/extra large) with diameter of 28/32/36. · Ceramic heads (made of delta ceramic)having variable offset (small/medium/large/extra large) with diameter of 28/32/36 mm compatible with the stem. · Non cemented porous coated acetabular cup made of titanium alloy available in various sizes, with locking mechanism to accept polyethylene liner of various sizes & diameter (28/32/36), must have holes in dome area for screw fixation. · The polyethylene liner should be highly cross-linked with various diameter & sizes compatible with acetabular cup & can accept various heads. · 3 Cancellous screws made of titanium to fix the cup into the acetabulam.	item185	5	Per Unit
187	2.86	Modular Bipolar Hemiarthroplasty System* · Modular Bipolar shell containing HDPE inbuilt of different sizes (39-53mm outer diameter and 22/28 mm inner diameter in three different neck length ) · Cemented tapered femoral stem (different sizes: Extra Small, Small, Medium, Large) · Cement restrictor · Centralizer· 1 packet of bone cement 40 g	item186	25	Per Unit
188	2.87	Revision hip stem: extensively porous coated * with modular neck and head.	item187	5	Per Unit
189	2.88	Revision hip stem: Modular Proximal component* · Proximal modular femoral component with porous coating which can be placed in independent version · Independent diaphyseal fixation , with modular neck and head	item188	5	Per Unit
190	2.89	Acetabular re-enforcement rings with 3 screws*	item189	5	Per Unit
191	2.9	Sterile orthopedic cable with single crimp system for periprosthetic fracture fixation*	item190	10	Per Unit
192	2.91	Basic  High Flex Total Knee Replacement System * · Total condylar Posterior Stabilized (PS)/ Cruciate Retaining (CR) design anatomic femoral component of various sizes and having design to accommodate high flexion, can accept different sizes and thickness of fixed bearing inserts. · Fixed bearing cemented tibial tray in various sizes, can accept different sizes of fixed bearing inserts of various sizes & thickness. · Fixed bearing PS/CR polyethylene insert in different sizes & thickness compatible with various sizes of fixed bearing tibial tray.· Patella with pegs made of polyethylene available in various sizes. · High viscosity antibiotic loaded bonecement 40 gm.	item191	10	Per Unit
193	2.92	High  Flex  Total  Knee  Replacement  System With  Attachment  Of  One  Tibal  Wedge And One Tibial Intramedullary Extension Rod Assembly * · Total knee replacement system, Posterior Stabilized (PS), design femoral component of various sizes and having design to accommodate high flexion, can accept different sizes and thickness of fixed bearing inserts. · Fixed bearing cemented tibial tray in various sizes with attachment of one tibial wedge and one tibial intramedullary extension rod assembly, can accept different sizes and thickness of fixed bearing inserts. · Fixed bearing PS/CR polyethylene insert in different sizes & thickness compatible with various sizes of fixed bearing tibial tray. · Patella with pegs made of polyethylene available in various sizes. · High viscosity antibiotic loaded bone cement 40 gm.	item192	5	Per Unit
194	2.93	Shoulder Hemireplacement Prosthesis (Modular) * · Cemented Humeral Stem with provision of attachment of tuberosities in different sizes · Humeral Head component (Different Sizes) · 1 pack bone cement	item193	5	Per Unit
195	2.94	Total Shoulder Arthroplasty Set* Glenoid Component: UHMWPE make of different sizes with option for anchor pegged & keeled glenoid Humeral Component: different size and length, porous coated for uncemented implantation Humeral Head: different size with option for eccentric head height · 1 pack bone cement	item194	5	Per Unit
196	2.95	Total elbow replacement* including humeral and ulnar component with 1 pack bone cement (40gm).	item195	5	Per Unit
197	2.96	Radial Head Prosthesis (metallic/ noncemented) *	item196	5	Per Unit
198	2.97	Cemented unicondylar knee implant set* (anatomical side specific design) comprising femoral component, tibial tray and UHDPE tibial articular surface with one pack of bone cement High viscosity antibiotic loaded bone cement 40 gm.	item197	5	Per Unit
199	2.98	Modular resection prosthesis for lower limb*- proximal femur/ distal femur/ proximal tibia/ total femur High viscosity antibiotic loaded bone cement 40 gm.	item198	5	Per Unit
200	2.99	Modular resection prosthesis for upper limb*- proximal humerus/ distal humerus/ total humerus High viscosity antibiotic loaded bone cement 40 gm.	item199	5	Per Unit
201	3	Sterile disposable covers for image intensifier (2 pieces in one pack)	item200	200	Per Unit
202	3.01	Negative pressure wound therapy with disposables including Small/medium/Large Dressing with tubing, drape, Y connector, bacterial filter and canister. Each set consists of Dressing, drape tubing/Bacterial filter and canister	item201	20	Per Unit
203	3.02	Monopolar handle with tips for cutting and coagulation (Compatible with L & T 3 pin digital 400 and martin ME400)	item202	20	Per Unit
204	3.03	Sterile cling drape	item203	20	Per Unit
205	3.04	Disposable O drape for Knee surgery (size 130 cm x 200 cm)	item204	20	Per Unit
206	3.05	Disposable U drape for hip surgery (size 130 cm x 200 cm)	item205	20	Per Unit
207	3.06	Gamma sterilized lodophorimpregnated polyester drape 34 Cms X 35 Cms	item206	20	Per Unit
208	3.07	Orthopaedic gloves with following specifications- Atleast 0.330mm thick for increased protection, Textured surface for better grip, Ease of donning, Dull colour to reduce glare, Great flexibility and elasticity, Latex, Powder free polymer coated inner surface (sizes 7, 7.5, 8)	item207	100	Per Unit
209	3.08	Radiation proctection gloves (sterile) , lead equivalence value 0.10 to 0.20 mm, Textured surface for better grip, Ease of donning in sizes 7 / 7.5 / 8	item208	50	Per Unit
210	3.09	Disposable impervious surgical gowns with back flap completely covering the back of the surgeon (Medium/Large /Extra large size)	item209	50	Per Unit
211	3.1	Blade for Humby's Knife, Sterile 158mm stainless steel	item210	10	Per Unit
212	3.11	X Ray Protective Lead Aprons: Protective apparel that is ergonomically designed and lightweight, making it comfortable to wear for long durations. Protection for the upper body and the sensitive thyroid gland at a lead equivalence of 0.5 mm Pb. Basic back protection required for CT Scans and cath labs at a lead equivalence of 0.25 mm Pb. Apparel should comply with the strict norms under EU directives 89 / 686 / EEC and 93 / 42 / EEC.	item211	10	Per Unit
213	3.12	Skin marking pen, sterile, disposable, thin tip	item212	50	Per Unit
214	3.13	Disposable Skin stapler	item213	50	Per Unit
215	3.14	Esmarch bandage 6”	item214	50	Per Unit
216	3.15	Esmarch bandage 4”	item215	50	Per Unit
217	3.16	Bone wax	item216	50	Per Unit
218	3.17	Gigli saw	item217	50	Per Unit
219	3.18	Disposable gamma irradiated gown set – each containing 5 gowns, 4 large drapes and stockinette each	item218	10	Per Unit
220	3.19	Disposable gamma irradiated , impervious kit of drapes for hip and knee surgery(replacement) containing (sterile stockinette, O drapes/ U drape, screen cover, polydrape sheet, drape sheet 1 X 1metre)	item219	10	Per Unit
221	3.2	Osteoconductive and resorbable injectable prefilled hydroxyapatite bone graft paste (5 ml) with injector kit*	item220	10	Per Unit
222	3.21	Osteoconductive cortical synthetic resorbable bone granules (5 cc) with minimum compression strength of 200mpa*	item221	10	Per Unit
223	3.22	Antibiotic impregnated (Gentamicin) collagen implants (all sizes)*	item222	10	Per Unit
224	3.23	Gentamicin impregnated sterilized cement beads (chain of 10 beads)*	item223	10	Per Unit
225	3.24	Ultrasound gel for physiotherapy use	item224	20	Per Unit
226	3.25	Output cables for SWD of existing machine (of make INDIA MEDICO INSTRUMENTS, Short wave diathermy 500 watts)	item225	5	Per Unit
227	3.26	Pads for SWD of existing machines (of make INDIA MEDICO INSTRUMENTS, Short wave diathermy 500 watts)	item226	5	Per Unit
228	3.27	Flexible rubber electrode for TENS (6 " x 8 " ) pf existing machine (of make MEDITEK ELECTRONICS microprocessor based 4 Channel automode tens)	item227	5	Per Unit
229	3.28	Nylon 3-0	item228	10	Per Unit
230	3.29	Nylon 4-0	item229	10	Per Unit
231	3.3	Fibrin Glue/sealant 2 ml	item230	10	Per Unit
232	3.31	Silicon tendon rod (Hunter) 3mm	item231	10	Per Unit
233	3.32	Silicon tendon rod (Hunter) 4mm	item232	10	Per Unit
234	3.33	Sterile kit for Bone Marrow Aspirate Cencentrate (BMAC) generation*	item233	10	Per Unit
235	3.34	Sterile kit for Platlet Rich Plasma (PRP) generation*	item234	10	Per Unit
236	3.35	Sterile Demineralized Bone Matrix 1 cc pack*	item235	10	Per Unit
237	3.36	Self seal Sterilization pouch; for steam, chemical vapour and EO sterilization with sterilization indicator; size 12 inch x 15 inch	item236	10	Per Unit
238	3.37	Self seal Sterilization pouch; for steam, chemical vapour and EO sterilization with sterilization indicator; size 6-7 inch x 10-11 inch	item237	10	Per Unit
239	3.38	Self seal Sterilization pouch; for steam, chemical vapour and EO sterilization with sterilization indicator; size 4 inch x 10 inch	item238	10	Per Unit
240	3.39	Knotless absorbable barbed PDS suture no. 1.0 on needle	item239	10	Per Unit
241	3.4	Knotless absorbable barbed monocryl suture no 1.0 on needle	item240	10	Per Unit
242	3.41	Non Cemented Total Hip System (Large head metal on poly ) * · Non Cemented HA/POROUS coated stem having various sizes, can accept multiple offsets of metal heads (small/ medium/ large/ extra large) with diameter of 32/36mm · Metal heads (made of alloy co+cr+mo) having variable offset (small/medium /large/extra large) with diameter of 32/36 mm compatible with the stem. · Non cemented porous coated acetabular cup made of titanium alloy available in various sizes, with locking mechanism to accept polyethylene liner of various sizes & diameter (32/36 mm), must have holes in dome area for screw fixation. · The polyethylene liner should be highly cross-linked with various diameter & sizes compatible with acetabular cup & can accept various metal heads. · 3 Cancellous screws made of titanium to fix the cup into the acetabulam.	item241	10	Per Unit
243	3.42	Radiofrequency ablator probe for arthroscopy of knee and shoulder; bipolar multielectrode type, should produce plasma temperature between 40-700C,with finger switch and foot control both, with suction capability, and of tip angle 90 / 500. Should be reusable if required.(Compatible with existing system)	item242	10	Per Unit
244	3.43	Radiofrequency ablator probe for arthroscopy of small joints; bipolar multielectrode type, should produce plasma temperature between 40-700C,with finger switch and foot control both, with suction capability, and of tip angle 30-400 and of diameter 1.4 mm. Should be reusable if required. .(Compatible with existing system)	item243	10	Per Unit
245	3.44	Radiofrequency ablator probe for arthroscopy of small joints; bipolar multielectrode type, should produce plasma temperature between 40-700C,with finger switch and foot control both, with suction capability, and of tip angle 30-400 and of diameter 2-2.5 mm. Should be reusable if required. .(Compatible with existing system)	item244	10	Per Unit
246	3.45	Radiofrequency hooked dissection probe for arthroscopy use, bipolar type, plasma producing, 20/300 angled for cutting and coagulation. Should be reusable if required. .(Compatible with existing system)	item245	10	Per Unit
247	3.46	Single use pocket size negative pressure wound therapy system with 2 lithium batteries and 2 sterile dressing and 10 fixation strips without any canister : Sizes- 10 X 20Cms*	item246	5	Per Unit
248	3.47	Single use pocket size negative pressure wound therapy system with 2 lithium batteries and 2 sterile dressing and 10 fixation strips without any canister : Sizes- 15X 30Cms*	item247	5	Per Unit
249	3.48	Tulle Gras paraffin Gauz medicated dressing with Leano weave technology.Size-10X10 Cm	item248	50	Per Unit
250	3.49	Distal Tibial metaphyseal plate 5 to 7 holes with 7 locking screws and 2 cortical screws (stainless steel)*	item249	20	Per Unit
251	3.5	Distal Tibial metaphyseal plate 5 to 7 holes with 7 locking screws and 2 cortical screws (Titanium)*	item250	20	Per Unit
252	3.51	Radial styloid anatomical locking plates 2.4/2.7 mm, 4 to 6 holes with 4 locking screws and 2 cortical screws (star headed screws)(Titanium)	item251	5	Per Unit
253	3.52	Titanium facet hooks/ laminar hooks/ transverse process hooks with various off- sets- small and large *	item252	10	Per Unit
254	3.53	Titanium top loading pedicle screw set percutaneous cannulated (5.5mm/6.5mm) diameter 4 polyaxial screws with 2 rods) misc sizes *	item253	10	Per Unit
255	3.54	Silicon Cannula with diameter of 6/8/10 mm with length of 2 to 5 cm (in all sizes)	item254	10	Per Unit
256	3.55	Sterile camera cover	item255	50	Per Unit
257	3.56	Laminoplasty spacer PEEK with 2 screws misc sizes *	item256	5	Per Unit
258	3.57	Absorbable haemostat (oxidized regenerated cellulose), sterile 1.25 X 5cm	item257	5	Per Unit
259	3.58	Hemostatic matrix plus flex tip (flowable haemostat)*	item258	5	Per Unit
260	3.59	Non- suture self adhesive artificial dural membrane (small / medium size)	item259	5	Per Unit
261	3.6	Ethibond No. 2.0 on needle or similar Poly-ethylene terepthalate, braided non-absorbable suture	item260	20	Per Unit
262	3.61	Knotless absorbable barbed monocryl suture no 1.0 on needle	item261	10	Per Unit
263	3.62	Valgus Osteotomy Plates for proximal femur (Titanium)	item262	10	Per Unit
264	3.63	All inside meniscal repair devise for meniscal tear either longitudinal or radial. The devise is very ergonomically and single hand devise. This devise consist of two peek implants with pre-tied knot. Two peek implants with #2-0 suture in it which needs to tension in last and cut it.	item263	10	Per Unit
265	3.64	All-suture cerclage using fibertape with a pre-tied racking hitch knot	item264	10	Per Unit
266	3.65	Gentamycin Sponge (like abgel or with similar specification)	item265	50	Per Unit
267	3.66	Mid foot plating set with MTP plates, TMT plates, Osteotomy plates 2.7mm with instrumentation (Titanium)	item266	20	Per Unit
268	3.67	Disposable needle for shoulder suture passer-	item267	10	Per Unit
269	3.68	Disposable needle for knee suture passer	item268	10	Per Unit
270	3.69	BMAC (Bone Marrow Aspiration Centrifuge) System:- BMAC System to treat AVN, Non-Union, Mal Union and Fracture Fixation for operating room with following system: Sterile BMC kit to be used in Angel System with Bone marrow needs to take out bone marrow from PICS, calcaneal & BMC kit to separate out BMAC/PPP/WBC. BMAC to be used in AVN, Non-union cases. • Centrifuge system with inbuilt process based timer sensor • Bone Marrow Needle - 50 (Fifty sets of consumables) • BMAC KIT (Sterile Item) • Anticoagulant ACD-A, 4 mL (Sterile Item)	item269	1	Per Unit
271	3.7	PRP- PRP system to treat chondromalacia, traumatic cartilage damage, post-op fracture re-fixation, tendinitis & for day surgery clinic & operating room with following system: Sterile Syringe to be used in PRP system with outer syringe to take out blood & inner syringe to separate out PRP to be used in cartilage defect/ tendinitis / rotator cuff tear. • Centrifuge system with 1500 rpm approx. • Bucket with Screw Cap (50 consumables sets) • Counterweight for the Centrifugation of PRP • Anticoagulant ACD-A, 4 mL (Sterile item) • PRP Syringe (Sterile item)	item270	1	Per Unit
272	3.71	Saw Blade for TJR Surgery Length 81 to 116 mm, Usable L 60-95 mm w-12.5-25mm(Compatible with existing stryker system)	item271	5	Per Unit
273	3.72	Saw Blade for General Traumatology Length 46 to 90 mm L 25-69mm W-10-50mm(Compatible with existing stryker system)	item272	5	Per Unit
274	3.73	Drill Bit with diameter 2.5mm & Length 110/85mm for quick coupling	item273	10	Per Unit
275	3.74	Drill Bit with diameter 3.5mm & Length 110/85mm, for quick coupling	item274	10	Per Unit
276	3.75	Drill Bit cannulated with length 300/250	item275	10	Per Unit
277	3.76	Guide Wire ø2.8 with thread-tip with trocar of length 30mm	item276	10	Per Unit
278	3.77	Cannulated Drill Bit 1.5 L110/85	item277	10	Per Unit
279	3.78	Cannulated Drill Bit 3.2/1.75 cann L170/140	item278	10	Per Unit
280	3.79	Schanz Screw 6.0 mm, length 190/50 mm, Stainless Steel	item279	20	Per Unit
281	3.8	Drill Bit with diameter 3.2mm, Length 145/120mm for quick coupling x10, diameter 4.5mm, Length 147/120mm for quick coupling	item280	10	Per Unit
282	3.81	Drill Bit with diameter 4.3mm, Length 221mm	item281	10	Per Unit
283	3.82	Drill bit with diameter 3.5mm for metal	item282	10	Per Unit
284	3.83	Drill bits dia 0.8mm, 1mm, 1.1mm, 1.3mm & 1.5mm, 1.8mm, 2mm, 2.4mm	item283	10	Per Unit
285	3.84	cannulated drill bits for 4 mm 6.5mm and 7mm CCS	item284	10	Per Unit
286	3.85	guide wires for 4 mm 6.5mm and 7mm CCS	item285	10	Per Unit
287	3.86	Coated Polyester on needle 2-0 suture (Ethibond type)	item286	5	Per Unit
288	3.87	Double endobutton compression device (Syndesmotic tightrope type)	item287	5	Per Unit
289	3.88	Suture button all sizes	item288	5	Per Unit
290	3.89	Suture Disc all sizes	item289	10	Per Unit
291	3.9	Spiked Washer all sizes	item290	5	Per Unit
292	3.91	Uncemented Conical revision hip stem 190-305mm (Wagner type) with instrumentation	item291	5	Per Unit
293	3.92	Cemented revision hip stem with instrumentation	item292	2	Per Unit
294	3.93	Trabecular metal hip CUP for revision hip arthroplasty with instrumentation and screws	item293	2	Per Unit
295	3.94	Highly porous coated THR cup with instrumentation and screws	item294	2	Per Unit
296	3.95	Revision hip Cage all sizes with instrumentation and screws and bone cement 20g	item295	2	Per Unit
297	3.96	Revision hip augments with instrumentation with bone cement 20g and screws	item296	2	Per Unit
298	3.97	Titanium interference screw 6mm to 11mm length 23mm and 28mm with instrumentation	item297	2	Per Unit
299	3.98	Beath Pin 3/32" (2.4mm) diameter, 10" (254mm) length	item298	5	Per Unit
300	3.99	Beath Pin 3/32" (2.4mm) diameter, 3” (Small) length	item299	10	Per Unit
301	4	6.0 mm Threaded Sacral Bar Kits Sacral Bar Set, Bar Length 200 mm, sterile or Sacral Bar Set, Bar Length 260 mm, sterile). bolt cutters capable of cutting a 6.0 mm barRod Cutter	item300	10	Per Unit
302	4.01	Drill Bit 4.5 mm, length 195/170 mm, 2- ute, for Quick Coupling	item301	2	Per Unit
303	4.02	Drill Bit 4.5 mm, length 180/165 mm, 2- ute, for Jacobs Chuck	item302	10	Per Unit
304	4.03	Drill Bit 3.2 mm, calibrated, length 230/205 mm, 3- ute, for Quick Coupling	item303	10	Per Unit
305	4.04	Drill Bit 3.2 mm, length 180/165 mm, 2- flute, for Jacobs Chuck	item304	10	Per Unit
306	4.05	6.5 mm Cannulated Screws, 16 mm thread length – 30 mm–150 mm lengths in 5 mm increments & – 160 mm–180 mm lengths in 10 mm increments – 316L stainless steel and titanium alloy	item305	10	Per Unit
307	4.06	6.5 mm Cannulated Screws, 32 mm thread length – 45 mm–150 mm lengths in 5 mm increments – 160 mm–180 mm lengths in 10 mm increments – 316L stainless steel and titanium alloy	item306	10	Per Unit
308	4.07	6.5 mm Solid cancellous Screws, fully threaded – 20 mm–130 mm lengths in 5 mm increments – 140 mm–180 mm lengths in 10 mm increments – 316L stainless steel and titanium alloy	item307	10	Per Unit
309	4.08	6.5 mm Cannulated Screws, fully threaded – 20 mm–130 mm lengths in 5 mm increments – 140 mm–180 mm lengths in 10 mm increments – 316L stainless steel and titanium alloy	item308	10	Per Unit
310	4.09	7.3 mm Cannulated Screws, 16 mm thread length – 30 mm–150 mm lengths in 5 mm increments – 160 mm–180 mm lengths in 10 mm increments – 316L stainless steel and titanium alloy	item309	10	Per Unit
311	4.1	7.3 mm Cannulated Screws, 32 mm thread length – 45 mm–150 mm lengths in 5 mm increments – 160 mm–180 mm lengths in 10 mm increments – 316L stainless steel and titanium alloy	item310	10	Per Unit
312	4.11	7.3 mm Cannulated Screws, fully threaded – 20 mm–130 mm lengths in 5 mm increments – 140 mm–180 mm lengths in 10 mm increments – 316L stainless steel and titanium alloy	item311	10	Per Unit
313	4.12	Washer, 13.0 mm – 316L stainless steel and titanium	item312	10	Per Unit
314	4.13	Disposable Bone Cement Vacuum Mixing Kit with mixing bowl with 400 mL capacity, vacuum suction tube with filter to reduce odors, suction adapter and scraper with spatula	item313	5	Per Unit
315	4.14	Uncemented bipolar HIP system (All Sizes)	item314	5	Per Unit
316	4.15	Chinese finger Trap for wrist arthroscopy	item315	20	Per Unit
317	4.16	Lead/ Aluminum Hand holder for Finger/ Hand Surgery	item316	50	Per Unit
318	4.17	Bohler’s stirrup	item317	5	Per Unit
319	4.18	Buck’s pulley	item318	100	Per Unit
320	4.19	Nylon Traction Cord	item319	50	Per Unit
321	4.2	Traction Weight in increments of Two Kg (At least Five in One Unit)	item320	50	Per Unit
322	4.21	Skin Stapler Remover	item321	10	Per Unit
323	4.22	Titanium Hagh tibial osteotomy plates (Medial with its screw per plate), (Tomofix Type)	item322	50	Per Unit
324	4.23	Low Viscocity PMMA Bone Cement 20 mg*	item323	10	Per Unit
325	4.24	Low Viscocity PMMA Bone Cement 40 mg*	item324	50	Per Unit
326	4.25	Antibiotic (Gentamycin) Impregnated PMMA Bone Cement 40 mg*	item325	50	Per Unit
327	4.26	Suture Disc All Sizes	item326	50	Per Unit
328	4.27	Suture Button All Sizes	item327	20	Per Unit
329	4.28	Spiked Washer All Sizes	item328	20	Per Unit
330	4.29	Post Screw for graft fixations All Sizes	item329	20	Per Unit
331	4.3	Spiked Screw for ligament All Sizes	item330	20	Per Unit
332	4.31	Tenodesis Screw (Titanium) All Sizes	item331	20	Per Unit
333	4.32	Tendon Graft Harvester Closed	item332	20	Per Unit
334	4.33	Tendon Graft Harvester Open	item333	2	Per Unit
335	4.34	Screw Driver 3.5 MM Solid with wooden Handle, with Hexagonal Tip	item334	2	Per Unit
336	4.35	Screw Driver 4.5 MM Solid with wooden Handle, with Hexagonal Tip	item335	4	Per Unit
337	4.36	Screw Driver for 4 MM CCS Cannulated with wooden handle, with Hexagonal Tip	item336	4	Per Unit
338	4.37	Screw Driver for 6.5 MM CCS Cannulated with wooden handle, with Hexagonal Tip	item337	4	Per Unit
339	4.38	Screw Driver Long with Head holding attachments 3.5 MM solid with wooden handle (Approximate Length 250 MM) , with Hexagonal Tip	item338	4	Per Unit