}

Tender For Id Works At Garia Laskarpur Colony, Part-A, B And C Under Rajpur Sonarpur Municipality In The District Of South 24 Parganas - I D Works At Garia Laskarpur Colony, Part-B, South 24 Parganas, Garia Laskarpur Colony, South 24 Pgs-West Bengal

Refugee Relief and Rehabilitation Department has published Tender For Id Works At Garia Laskarpur Colony, Part-A, B And C Under Rajpur Sonarpur Municipality In The District Of South 24 Parganas - I D Works At Garia Laskarpur Colony, Part-B, South 24 Parganas. Submission Date for this Tender is 26-12-2019. Civil Work Tenders in Garia Laskarpur Colony, South 24 Pgs West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

22811773
Tender For Id Works At Garia Laskarpur Colony, Part-A, B And C Under Rajpur Sonarpur Municipality In The District Of South 24 Parganas - I D Works At Garia Laskarpur Colony, Part-B, South 24 Parganas
Open Tender
Indian
West Bengal
Garia Laskarpur Colony, South 24 Pgs
26-12-2019

Tender Details

Tender For Id Works At Garia Laskarpur Colony, Part-A, B And C Under Rajpur Sonarpur Municipality In The District Of South 24 Parganas - I D Works At Garia Laskarpur Colony, Part-B, South 24 Parganas

Key Value

Document Fees
Refer document
EMD
INR 87251.0 /-
Tender Value
INR 43.62 Lakhs /-

BOQ Items

Name of Work: ID works at Garia Laskarpur Colony, Part-A, B and C under Rajpur Sonarpur Municipality in the district of South 24 Parganas - I D works at Garia Laskarpur Colony, Part-B, South 24 Parganas
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. 200 mm diameter. 1 2806 Mtr.
2 1.1 150 mm diameter. 1.1 3900 Mtr.
3 1.2 125 mm diameter. 1.2 137.58 Mtr.
4 1.3 100 mm diameter. 1.3 1192.36 Mtr.
5 2 Coal tarring on wooden surfaces including cost of materials. \nDouble coat. 2 4105.11 Sqm.
6 3 Labour for driving Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour charges for necessary driving appliances and all tackles. 200 mm dia. 3 1656 Mtr.
7 3.1 150 mm diameter. 3.1 2308.17 Mtr.
8 3.2 125 mm diameter. 3.2 137.58 Mtr.
9 4 Labour for fitting and fixing 10 cm. to 13 cm. diameter Eucalyptus-bullah as ties and runners including necessary nails, bolts and nuts. 4 917.2 Mtr.
10 5 Supplying empty Cement bags in good condition. Filling empty Cement bags with dry earth or sand, stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete. 5 27057 % Nos
11 6 Filling empty Cement bags with dry earth or sand stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete but excluding cost of sand and gunny bags. 6 27057 % Nos
12 7 Earthwork in filling in foundation trenches and at the back of abutments with good earth (sandy soil) in layers not exceeding 15 cm. including watering and ramming layer by layer complete with earth( sandy soil) arranged by contractor including all lead and lifts ,loading,unloading, stacking and carriage. The earth (sandy soil) to be approved by the Engineer-in-charge. Land will be arrange by agency and rate includes royalty.N.B. The rate is inclusive of royalty and contractor has to produce challan in support of payment of royalty. 7 799.55 Cum.
13 8 Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD 8 3.03 cum
14 9 Cleaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank drain and compound including cutting, loading, unloading to and from truck or cart by Mathor labour & removing the same to any distance 9 94.5 % Cum
15 10 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading orstacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means. a) upto 3 m depth without pumping out water and shoring 10 236.39 cum.
16 11 Sand filling in foundation trenches and at the back of abutments, wing-walls etc. with good local sand free from earth in layers not exceeding 15 cm. including inundating each layer by profuse water and poking and ramming layer by layer complete including supply of sand. Quality of sand is to be approved by the Engineer-in-charge 11 48.013 cum.
17 12 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches 12 376.8 mtr.
18 13 Providing and laying Design Mix concrete for plain/reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and ement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for curing quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works. M-15 Grade Using concrete mixer 13 37.8 cum..
19 14 First class Brick work in cement sand mortar (1:4) in steining of well, pier, abutment, wing wall, parapets cross drain. H.P. culverts, guard wall etc. including curing, scaffolding, raking out joints etc. complete including cost and carriage of all materials. 1:4 proportion. 14 82.5 cum.
20 15 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar. 15 mm thick plaster 15 675 Sqm.
21 16 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc 16 675 sqm
22 17 Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. Where staging is required 17 18.1 sqm.
23 17.1 Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. Where staging is not required 17.1 20 sqm.
24 18 Providing and laying Design Mix concrete for plain /reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and ement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and cost for curing, quality control, sampling, testing etc. all complete but excludingcost of labour and materials for formwork & reinforcement works. M-25 Grade Using concrete mixer 18 1.2 cum.
25 19 Supplying, fitting and placing HYSD bar reinforcement in Sub-structure including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge 19 0.12 mt.
26 20 Earthwork in filling in foundation trenches with good earth in layers not exceeding 15cm. including watering and ramming layer by layer complete with earth obtained from excavation of foundation or from fresh excavation of land arranged by Department within a lead of 150 m. 20 18.5 cum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail