Construction And Renovation Work Of Furkating College , Golaghat Under Rusa
Tender Value
1.13 Crore
Estimated cost
Bid Submission
20 Dec 2019
0 days left
EMD
1.13 Crore
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Furkating → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction And Renovation Work Of Furkating College , Golaghat Under Rusa
BOQ
| Name of Work: Construction & Renovation work of Furkating College, Golaghat, Under RUSA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil | item1 | 435.01 | m3 |
| 2 | 2 | Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling. | item2 | 720.36 | m2 |
| 3 | 3 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume | item3 | 108.06 | m3 |
| 4 | 4 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) \n(ii)Super Ductile (SD) TMT reinforcement bars | item4 | 386.65 | Qntl |
| 5 | 5 | Providing formwork of ordinary timber planking so as to give a rough finish including centering, shuttering strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:\n Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.\ni) Using 25mm thick plank. | item5 | 74.88 | m2 |
| 6 | 6 | Sides of tie beam, plinth beams, grade beams etc. at or below plinth level. \ni) Using 25 mm thick plank.. | item6 | 253.12 | m2 |
| 7 | 7 | Columns, pillars, posts & strut\na) Square, Rectungular, polygonal in plan or any shape like Tee/L etc. having plane vertical face.\ni) Using 25 mm thick plank. | item7 | 548.64 | m2 |
| 8 | 8 | Sides and Soffits of beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.\na) For depth not exceeding 1.0m \nii) Using 25mm thick plank. | item8 | 495.84 | m2 |
| 9 | 9 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.\n(a) Floors etc. upto 200mm in thickness.\n(i) Using 38mm thick plank. | item9 | 1267 | m2 |
| 10 | 10 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank)\n(a) Floors etc. upto 200mm in thickness.\n(i) Using 38mm thick plank. | item10 | 15.54 | m2 |
| 11 | 11 | Providing and laying plain/reinforced cement concrete works in prop 1:1.5:3 including dewatering if necessary and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)\ni) In substructure up to plinth level.\nFoundation, footing, columns with base, tie and plinth beam, grade beam, pile cap, base slab, retaining walls walls of septic tank, inspection pit and the like and other works not less than 100mm thick | item11 | 83.13 | m3 |
| 12 | 12 | ii) In superstructure from plinth level up to 1st floor level.\nb) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and suport, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staricase including preparing of top surfaces and furnishing and nosing. | item12 | 176.82 | m3 |
| 13 | 13 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. works etc.\ni) Using 25mm thick plank. | item13 | 64.59 | m2 |
| 14 | 14 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. \n(II) In substructure above plinth level up to 1st floor level.\n(b) In proportion 1:4.(1 cement:4 sand) | item14 | 65.96 | m3 |
| 15 | 15 | 112mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/ Tor steel of column to be embeded in cement mortar and will be measured and paid separately) \na) In cement mortar 1:4 | item15 | 1135.71 | m2 |
| 16 | 16 | Earth/sand filling in plinth in layers not more than 1.50mm thick including necessary carriage, watering, ramming etc. complete as directed ans specified including payment of land compensation, forst royalty, sales tax and other duties and taxes as may be necessary \n(C) With river sand or silt (predominantly non plastic)by truck carriage including loading and unloading.\n | item16 | 332.65 | m3 |
| 17 | 17 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.\n(b) With 1st class timber (Bonsum/ Sundi)\n | item17 | 2.42 | m3 |
| 18 | 18 | Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)\n(b) 35mm thick\n | item18 | 65.53 | m2 |
| 19 | 19 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \nA) On fair side\nb) In cement mortar 1:4 | item19 | 2965.03 | m2 |
| 20 | 20 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \nB) On rough side\nb) In cement mortar 1:4\n | item20 | 751.11 | m2 |
| 21 | 21 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.\nI . Plain grill\n(c) Fixed to Brickwork/P.C.C/R.C.C.\n | item21 | 1154.52 | kg |
| 22 | 22 | Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give and even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brooming the surface free from mortar droppings and other foreign matter and including preparing surface even and sand papered smooth. \ni) Primary coat | item22 | 2965.03 | m2 |
| 23 | 23 | i) Top coat | item23 | 853.42 | m2 |
| 24 | 24 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)\n(i) Thickness = 1.5 mm thick | item24 | 3962.93 | m2 |
| 25 | 25 | Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.\n(a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item25 | 2965.03 | m2 |
| 26 | 26 | Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | item26 | 751.11 | m2 |
| 27 | 27 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (b). With ready mixed paint , wood primer (white) | item27 | 164.22 | m2 |
| 28 | 28 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i).Surfaces up to 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item28 | 164.22 | m2 |
| 29 | 29 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed \"red-lead/ red oxide\" primer. | item29 | 196.92 | m2 |
| 30 | 30 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item30 | 196.92 | m2 |
| 31 | 31 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. \n | item31 | 443.52 | m2 |
| 32 | 32 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (b) 20 mm thick\n | item32 | 93.83 | m2 |
| 33 | 33 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department).\nC/ Delux range\nSomany/ Orient/Nitco/Qutone Make\nIii/ Of size 600mmx600mm and above | item33 | 139.05 | m2 |
| 34 | 34 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).\nC/ Delux range\nSomany/ Orient/Nitco/Qutone Make\niv) Of size 300mmx600mm and above | item34 | 16.65 | m2 |
| 35 | 35 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.\n(A) CERAMIC i)Normal range (Sizes 300 mm x 300mm and above) (a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate | item35 | 213.44 | m2 |
| 36 | 36 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. \n(b)3 Track sliding window\n(iv) 5 mm clear glass | item36 | 98.8 | m2 |
| 37 | 37 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts i) 300mm x 16mm | item37 | 72 | each |
| 38 | 38 | b) Tower bolts ii) 250mm x 12mm | item38 | 72 | each |
| 39 | 39 | c) Door Handles ii) 150mm | item39 | 72 | each |
| 40 | 40 | e) Butt hinge iii) 75mm x 65mm x 4mm | item40 | 72 | Pair |
| 41 | 41 | t) Door stopper with rubber stopper | item41 | 56 | Pair |
| 42 | 42 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.\n | item42 | 443.52 | m2 |
| 43 | 43 | b) with aqueous emulsion having concentration 1:499 with Premise 350 SC (Imidachloprid 30.5% SC) and water, i.e. 0.07% solution.\n | item43 | 443.52 | m2 |
| 44 | 44 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) \nBRAND : FIRESTOP / FIREND / FIRE SHIELD | item44 | 8 | each |
| 45 | 45 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)\na) White \ni) Parryware make \n(v) Elite S Trap (Cat No.C0297) (inclusive of seat cover)\n | item45 | 8 | each |
| 46 | 46 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\na) White \ni) Parryware make \n(iii) Economy Dual Flush (Cat No.C8109) | item46 | 8 | each |
| 47 | 47 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) \n1.13.1PEDESTAL BASIN (with pedestal) (A) Parryware Make \n(a) White \n(iv) Cascade NXT 550 x 440 with long Pedestal (Cat. No.C0404/C0380)\n | item47 | 12 | each |
| 48 | 48 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately \n(B) Nirali\n(iii) Glister Small (Bowl Size - 410 x 330 x 150) Glossy \n | item48 | 1 | each |
| 49 | 49 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.\n | item49 | 12 | each |
| 50 | 50 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make \n(ii) Wall Soap tray (Cat. No.C9951) | item50 | 12 | each |
| 51 | 51 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. \na) In exposed surfaces or in trenches. (i) 160mm dia. | item51 | 20 | R/m |
| 52 | 52 | Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified.\n(b) Sona (ii) Rupa 40mm (HT/ FT) (Cat.No.WS-0801) | item52 | 11 | each |
| 53 | 53 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.\n(b) Sona (iii) 90mm dia. PVC cowel of ISI make | item53 | 3 | each |
| 54 | 54 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes\ni) 2000 Lt capacity , Sintex make\n | item54 | 4 | each |
| 55 | 55 | Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed.\n(a) 2000 litre capacity | item55 | 4 | each |
| 56 | 56 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed a) In exposed surfaces or in trenches. C) CPVC pipe with CPVC fittings\n(Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) ix) 90mm (ID) diameter | item56 | 70 | R/m |
| 57 | 57 | vii) 62.5mm (ID) diameter | item57 | 60 | R/m |
| 58 | 58 | vi) 50mm (OD) diameter | item58 | 60 | R/m |
| 59 | 59 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) c) 32 mm dia | item59 | 70 | R/m |
| 60 | 60 | d) 25 mm dia | item60 | 50 | R/m |
| 61 | 61 | e)20 mm dia | item61 | 65 | R/m |
| 62 | 62 | f)15 mm dia | item62 | 125 | R/m |
| 63 | 63 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) \niv) Agmeco brand\n(i) Bib Cock without Flange CAT No.CC 00204/CAT No.CN 00204 | item63 | 14 | each |
| 64 | 64 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \niv) Sona brand\n(d) Angle stop cock two way 15mm | item64 | 14 | each |
| 65 | 65 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \niii) Agmeco (classic) \n(a) Flat | item65 | 14 | each |
| 66 | 66 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.\na) 50mm dia | item66 | 11 | each |
| 67 | 67 | Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover ,ceiling rose (Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt. Short point up to 3.00 metre. length. \n\n | item67 | 47 | each |
| 68 | 68 | Medium point up to 3.00 metre. length. \n\n | item68 | 45 | each |
| 69 | 69 | Long point up to 3.00 metre. length. \n\n | item69 | 47 | each |
| 70 | 70 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Short point up to 3.00 metre. length. \n\n | item70 | 37 | each |
| 71 | 71 | Medium point up to 6.00 metre. length. \n\n | item71 | 50 | each |
| 72 | 72 | Long point up to 10.00 metre. length. \n\n | item72 | 37 | each |
| 73 | 73 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Short point up to 3.00 metre. length. \n\n | item73 | 37 | each |
| 74 | 74 | Medium point up to 6.00 metre. length. \n\n | item74 | 45 | each |
| 75 | 75 | Long point up to 10.00 metre. length. \n\n | item75 | 37 | each |
| 76 | 76 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts ( Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in surface flat 19 mm casing system \n\n | item76 | 80 | R/m |
| 77 | 77 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. in surface flat 19 mm ISI marked casing 'n' capping system\n | item77 | 60 | R/m |
| 78 | 78 | With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in surface flat 25mm ISI marked casing 'n' capping system \n\n | item78 | 50 | R/m |
| 79 | 79 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts ( Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity. With 3 x 2.5 sq. mm. + earth continuity with 2x1.5 sq. mm. cable in surface flat 19mm ISI marked casing 'n' capping\n\n | item79 | 47 | R/m |
| 80 | 80 | With 3 x 4 sq. mm. + earth continuity with 2x 2.5 sq. mm. cable in surface flat 25 mm ISI marked casing 'n' capping system.\n | item80 | 50 | R/m |
| 81 | 81 | With 3 x 6 sq. mm. + earth continuity with2x 4 sq. mm. cable in surface flat 25 mm ISI marked casing 'n' capping system.\n\n | item81 | 40 | R/m |
| 82 | 82 | Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series\n(Schneider MG, legrand, Hager make) 6 to 32A \n | item82 | 29 | each |
| 83 | 83 | 63A | item83 | 18 | each |
| 84 | 84 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 12 way SPN double door | item84 | 2 | each |
| 85 | 85 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 6 way TPN (4+18) double door | item85 | 2 | each |
| 86 | 86 | Supplying fitting and fixing of celling of fan regulator including connection etc. complete as required. Electronic Type | item86 | 29 | each |
| 87 | 87 | Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. Standard model 1200 mm Sweep Usha make)/ Standard model 1050 / 1200 mm Sweep Havells make)/ High speed 1200 mm sweep (ORIENT PSPO mak | item87 | 29 | each |
| 88 | 88 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make) | item88 | 2 | each |
| 89 | 89 | Supplying and fixing of batten holder including 11 W CFL lamp and connection as approved by the Deptt.)as required. | item89 | 90 | each |
| 90 | 90 | Supply with installation & commissioning of readymade maintenance free CPRI approved chemical earthing system with 50 mm dia. 3.00 Metres length corrosion free dual pipe technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover (PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt. | item90 | 2 | each |
| 91 | 91 | Supplying including installation, connection as approved by the Deptt., testing and commissioning of JET PUMP SET (HORIZONTAL) complete as directed and specified by the deptt. 1 HP single Phase jet pump set (Horizontal(Crompton Greaves/ Aquatic/ CRI/ V-Guard make) 2900 rpm with DOL Starter ( Crompton Greaves/ Control & Switch Gear/ BCH/ L& T / Siemens make) . | item91 | 1 | each |
AI Tender Summary
Tender Timeline
Dec 09, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 20, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 21, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender